aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-10-24mtd: fix the build warning for fsl_upm.cRoy Zang1-1/+1
Fix the build warning: drivers/mtd/nand/fsl_upm.c: In function 'fun_chip_init': drivers/mtd/nand/fsl_upm.c:190: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t' Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: fix almost all checkpatch warnings in nand_base.cFlorian Fainelli1-30/+43
Only 3 warnings are left, one is off by one character, but splitting the line would reduce the readability. One is for a for loop statement, which would also not improve readability. The last one is a false positive on a test. Artem: it is much easier to verify patches against nand_base.c with checkpatch.pl when nand_base.c itself does not have so many checkpatch.pl warnings. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: fix all checkpatch errors in nand_base.cFlorian Fainelli1-23/+26
Artem: it is much easier to verify patches against nand_base.c with checkpatch.pl when nand_base.c itself does not have so many checkpatch.pl warnings. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: davinci: relax a timeout for ECC-initializationWolfram Sang1-1/+2
Sudhakar found out that 100µs are enough. Sadly, his updated patch was overlooked and an older version still using 100ms was merged. Fix this. Reference: http://patchwork.ozlabs.org/patch/59180/ Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: m25p80: Add support for two new Spansion SPI devices (S25FL-K)Gernot Hoyler1-0/+2
This patch adds support for Spansion S25FL016K and S25FL064K SPI flash. It has been tested with physical devices. Note that both parts exhibit a Winbond manufacturer ID so they might also be added to that section. Signed-off-by: Gernot Hoyler <Gernot.Hoyler@spansion.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: split ONFI detection logic to its own functionFlorian Fainelli1-61/+71
In order to reduce the indentation and improve the readability of nand_get_ flash_type, split the ONFI detection logic to its own function. The detection logic inside nand_flash_detect_onfi is also rewritten to allow for less indentation. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: add support for reading ONFI parameters from NAND deviceFlorian Fainelli1-30/+134
This patch adds support for reading NAND device ONFI parameters and use the ONFI informations to define its geometry. In case the device supports ONFI, the onfi_version field in struct nand_chip contains the version (BCD) and the onfi_params structure can be used by drivers to set up timings and such. We currently only support ONFI 1.0 parameters. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: denali should also handle NAND_CMD_PARAMFlorian Fainelli1-0/+1
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: OneNAND: Remove unused cmd_map at s5pc110Kyungmin Park1-1/+0
S5PC110 OneNAND controller use the generic functions provided from onenand_base. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: Samsung MLC - new OOB sizesBrian Norris1-2/+15
There are some additions to the detection scheme used by Samsung MLC NAND. These simple changes to support the 400- and 436-byte OOB are found in the following data sheet: Samsung K9GBG08U0M (p.40) Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: davinci: fix comment to match the codeWolfram Sang1-2/+3
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: pcmciamtd: remove dead codeDan Carpenter1-4/+0
This code isn't reachable. I looked through the git history and it hasn't been reachable for years. Someone removed the label to silence gcc's unused label warning but these few lines accidentally got left behind. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: mpc5121_nfc: fix memory leak on error pathJulia Lawall1-2/+5
Add a call to of_node_put in the error handling code following a call to of_find_compatible_node. Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: pxa3xx_nand: set oob length in the runtimeLei Wen1-7/+18
For different command need different oob requirement, set the proper oob length by different cmd. Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: pxa3xx_nand: remove the flash info in driver structureLei Wen1-72/+43
After probe, all info already transfer to driver structure. There is no need to keep the original flash info. So that we could safely free the flash info in memory, which may grows larger when more flash is suported. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: pxa3xx_nand: introduce default timing to reduce read id timesLei Wen1-35/+33
We certainly don't need to send read id command times by times, since we already know what the id is after the first read id... So create a default timing which could ensure it would successfully read id out all supported chip. Then follow the build-in table to reconfigure the timing. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: pxa3xx_nand: condense the flash definitionLei Wen2-163/+16
Adding a new flash definition would need less code. Keep the platform passing flash definition method. If one flash is both defined in platform data and builtin table, driver would select the one from platform data first. By this way, platform could select the timing most suit for itself, not need to follow the common settings. Signed-off-by: Lei Wen <leiwen@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: support new Toshiba SLCBrian Norris2-2/+34
Toshiba does not use ONFI for their NAND flash. So we have to continue to add new IDs used by Toshiba devices as well as heuristic detection for scanning the 2nd page for a BBM. This is a relatively harmless start at supporting many of them. These chips mostly follow the same ID fields of previous generations, but there is a need for a tweak. These chips introduce a strange 576 byte OOB (that's 36 bytes per 512 bytes of page). In the preliminary data, Toshiba has not defined exactly how their ID strings should decode. In the future, a new tweak must be added. Data is taken from, among others, Toshiba TC58TxG4S2FBAxx Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: cleanup Kconfig dependenciesH Hartley Sweeten1-24/+22
Remove the MTD!=n dependency since that is handled by drivers/mtd/Kconfig. Simplify the dependency checks for mtd/chips by using if/endif blocks. Remove all default n since that is the Kconfig default. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: edit comments on deprecation of ioctl ECCGETLAYOUTBrian Norris1-1/+1
There were some improvements and additions necessary in the comments explaining of the expansion of nand_ecclayout, the introduction of nand_ecclayout_user, and the deprecation of the ioctl ECCGETLAYOUT. Also, I found a better placement for the macro MTD_MAX_ECCPOS_ENTRIES; next to the definition of MTD_MAX_OOBFREE_ENTRIES in mtd-abi.h. The macro is really only important for the ioctl code (found in drivers/mtd/mtdchar.c) but since there are small edits being made to the user-space header, I figured this is a better location. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: expand nand_ecc_layout, deprecate ioctl ECCGETLAYOUTBrian Norris2-3/+48
struct nand_ecclayout is too small for many new chips; OOB regions can be as large as 448 bytes and may increase more in the future. Thus, copying that struct to user-space with the ECCGETLAYOUT ioctl is not a good idea; the ioctl would have to be updated every time there's a change to the current largest size. Instead, the old nand_ecclayout is renamed to nand_ecclayout_user and a new struct nand_ecclayout is created that can accomodate larger sizes and expand without affecting the user-space. struct nand_ecclayout can still be used in board drivers without modification -- at least for now. A new function is provided to convert from the new to the old in order to allow the deprecated ioctl to continue to work with truncated data. Perhaps the ioctl, the conversion process, and the struct nand_ecclayout_user can be removed altogether in the future. Note: There are comments in nand/davinci_nand.c::nand_davinci_probe() regarding this issue; this driver (and maybe others) can be updated to account for extra space. All kernel drivers can use the expanded nand_ecclayout as a drop-in replacement and ignore its benefits. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: spansion S30MLxxxP supportBrian Norris1-0/+13
Some Spansion chips have a method for determining eraseblock size that is incompatible with similar ID chips of other sizes. This implements some heuristic detection of these differences. This patch checks for a 5-byte ID with trailing zeros as well as a 512-byte page size to ensure that chips are not misdetected as the S30MLxxxP ORNAND series. [Tweaked by Artem a bit] Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: fix callback return value checkBaruch Siach1-1/+1
Drivers may (and do) return negative errno values other than -1 from the ecc.correct callback. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-28Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds4-14/+24
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: fix module refcount breakage introduced by libahci split
2010-09-28ahci: fix module refcount breakage introduced by libahci splitTejun Heo4-14/+24
libata depends on scsi_host_template for module reference counting and sht's should be owned by each low level driver. During libahci split, the sht was left with libahci.ko leaving the actual low level drivers not reference counted. This made ahci and ahci_platform always unloadable even while they're being actively used. Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for each low level ahci driver. stable: only applicable to 2.6.35. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com> Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-28Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/stagingLinus Torvalds1-0/+1
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon (coretemp): Fix build breakage if SMP is undefined
2010-09-28Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds2-3/+4
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix pci_resource_alignment prototype
2010-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds16-69/+259
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) tcp: Fix >4GB writes on 64-bit. net/9p: Mount only matching virtio channels de2104x: fix ethtool tproxy: check for transparent flag in ip_route_newports ipv6: add IPv6 to neighbour table overflow warning tcp: fix TSO FACK loss marking in tcp_mark_head_lost 3c59x: fix regression from patch "Add ethtool WOL support" ipv6: add a missing unregister_pernet_subsys call s390: use free_netdev(netdev) instead of kfree() sgiseeq: use free_netdev(netdev) instead of kfree() rionet: use free_netdev(netdev) instead of kfree() ibm_newemac: use free_netdev(netdev) instead of kfree() smsc911x: Add MODULE_ALIAS() net: reset skb queue mapping when rx'ing over tunnel br2684: fix scheduling while atomic de2104x: fix TP link detection de2104x: fix power management de2104x: disable autonegotiation on broken hardware net: fix a lockdep splat e1000e: 82579 do not gate auto config of PHY by hardware during nominal use ...
2010-09-28hwmon (coretemp): Fix build breakage if SMP is undefinedGuenter Roeck1-0/+1
Commit e40cc4bdfd4b89813f072f72bd9c7055814d3f0f introduced a build breakage if CONFIG_SMP is undefined. This commit fixes the problem. This fix is only a workaround. For a real fix, cpu_sibling_mask() should be defined in UP include code, eg in linux/smp.h, and asm/smp.h should not be included directly. This fix is currently not possible because asm/smp.h defines cpu_sibling_mask() unconditionally and is included directly from many source files. Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com>
2010-09-27Fix pktcdvd ioctl dev_minor range checkDan Rosenberg1-1/+1
The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a pktcdvd_device from the global pkt_devs array. The index into this array is provided directly by the user and is a signed integer, so the comparison to ensure that it falls within the bounds of this array will fail when provided with a negative index. This can be used to read arbitrary kernel memory or cause a crash due to an invalid pointer dereference. This can be exploited by users with permission to open /dev/pktcdvd/control (on many distributions, this is readable by group "cdrom"). Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> [ Rather than add a cast, just make the function take the right type -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27de2104x: fix ethtoolOndrej Zary1-2/+5
When the interface is up, using ethtool breaks it because: a) link is put down but media_timer interval is not shortened to NO_LINK b) rxtx is stopped but not restarted Also manual 10baseT-HD (and probably FD too - untested) mode does not work - the link is forced up, packets are transmitted but nothing is received. Changing CSR14 value to match documentation (not disabling link check) fixes this. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Merge branch 'vhost-net' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostDavid S. Miller1-3/+4
2010-09-27Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds1-2/+4
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb3: Turn off RX coalescing for iWARP connections
2010-09-27Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds3-7/+8
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits) ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE ARM: 6408/1: omap: Map only available sram memory ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries ARM: pxa: remove pr_<level> uses of KERN_<level> ARM: pxa168fb: clear enable bit when not active ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured ARM: pxa168: fix corrected reset vector ARM: pxa: Use PIO for PI2C communication on Palm27x ARM: pxa: Fix Vpac270 gpio_power for MMC ARM: 6401/1: plug a race in the alignment trap handler ARM: 6406/1: at91sam9g45: fix i2c bus speed leds: leds-ns2: fix locking ARM: dove: fix __io() definition to use bus based offset dmaengine: fix interrupt clearing for mv_xor ARM: kirkwood: Unbreak PCIe I/O port ARM: Fix build error when using KCONFIG_CONFIG ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing ARM: 6400/1: at91: fix arch_gettimeoffset fallout ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM ...
2010-09-27Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-0/+3
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix driver module removal
2010-09-27Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intelLinus Torvalds2-10/+7
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915/sdvo: Handle unsupported GET_SUPPORTED_ENHANCEMENTS gracefully drm/i915/sdvo: Cleanup connector on error path drm/i915: Fix 945GM regression in e259befd
2010-09-27Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmcLinus Torvalds1-4/+8
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove mmc: sdhci-s3c: fix incorrect spinlock usage after merge mmc: MAINTAINERS: add myself as MMC maintainer
2010-09-27Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds2-1/+7
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: pd6729: Fix error path pcmcia: preserve configuration information if request_io fails partly
2010-09-27Merge git://git.infradead.org/iommu-2.6Linus Torvalds1-0/+27
* git://git.infradead.org/iommu-2.6: intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/a intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space
2010-09-273c59x: fix regression from patch "Add ethtool WOL support"Jan Beulich1-0/+10
This patch (commit 690a1f2002a3091bd18a501f46c9530f10481463) added a new call site for acpi_set_WOL() without checking that the function is actually suitable to be called via vortex_set_wol+0xcd/0xe0 [3c59x] dev_ethtool+0xa5a/0xb70 dev_ioctl+0x2e0/0x4b0 T.961+0x49/0x50 sock_ioctl+0x47/0x290 do_vfs_ioctl+0x7f/0x340 sys_ioctl+0x80/0xa0 system_call_fastpath+0x16/0x1b i.e. outside of code paths run when the device is not yet enabled or already disabled. In particular, putting the device into D3hot is a pretty bad idea when it was already brought up. Furthermore, all prior callers of the function made sure they're actually dealing with a PCI device, while the newly added one didn't. In the same spirit, the .get_wol handler shouldn't indicate support for WOL for non-PCI devices. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27RDMA/cxgb3: Turn off RX coalescing for iWARP connectionsSteve Wise1-2/+4
The HW by default has RX coalescing on. For iWARP connections, this causes a 100ms delay in connection establishement due to the ingress MPA Start message being stalled in HW. So explicitly turn RX coalescing off when setting up iWARP connections. This was causing very bad performance for NP64 gather operations using Open MPI, due to the way it sets up connections on larger jobs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-27amd64_edac: Fix driver module removalBorislav Petkov1-0/+3
f4347553b30ec66530bfe63c84530afea3803396 removed the edac polling mechanism in favor of using a notifier chain for conveying MCE information to edac. However, the module removal path didn't test whether the driver had setup the polling function workqueue at all and the rmmod process was hanging in the kernel at try_to_del_timer_sync() in the cancel_delayed_work() path, trying to cancel an uninitialized work struct. Fix that by adding a balancing check to the workqueue removal path. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-09-26s390: use free_netdev(netdev) instead of kfree()Vasiliy Kulikov1-2/+2
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26sgiseeq: use free_netdev(netdev) instead of kfree()Kulikov Vasiliy1-1/+1
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26rionet: use free_netdev(netdev) instead of kfree()Kulikov Vasiliy1-1/+1
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26ibm_newemac: use free_netdev(netdev) instead of kfree()Kulikov Vasiliy1-2/+2
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26smsc911x: Add MODULE_ALIAS()Vincent Stehlé1-0/+1
This enables auto loading for the smsc911x ethernet driver. Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26de2104x: fix TP link detectionOndrej Zary1-2/+21
Compex FreedomLine 32 PnP-PCI2 cards have only TP and BNC connectors but the SROM contains AUI port too. When TP loses link, the driver switches to non-existing AUI port (which reports that carrier is always present). Connecting TP back generates LinkPass interrupt but de_media_interrupt() is broken - it only updates the link state of currently connected media, ignoring the fact that LinkPass and LinkFail bits of MacStatus register belong to the TP port only (the chip documentation says that). This patch changes de_media_interrupt() to switch media to TP when link goes up (and media type is not locked) and also to update the link state only when the TP port is used. Also the NonselPortActive (and also SelPortActive) bits of SIAStatus register need to be cleared (by writing 1) after reading or they're useless. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26de2104x: fix power managementOndrej Zary1-0/+3
At least my 21041 cards come out of suspend with bus mastering disabled so they did not work after resume(no data transferred). After adding pci_set_master(), the driver oopsed immediately on resume - because de_clean_rings() is called on suspend but de_init_rings() call was missing in resume. Also disable link (reset SIA) before sleep (de4x5 does this too). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_removeMarek Szyprowski1-2/+4
If not all clocks have been defined in platform data, the driver will cause a null pointer dereference when it is removed. This patch fixes this issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Ball <cjb@laptop.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.