aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-02rdma/siw: main include fileBernard Metzler1-0/+745
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: iWarp wire packet formatBernard Metzler1-0/+380
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-01net/mlx5: E-Switch, Handle UC address change in switchdev modeBodong Wang1-12/+9
When NVME device emulation mode is enabled, more than one PFs use the same physical port. In this case, MPFS is required to program L2 addresses. It used to rely on netdev set_rx_mode in switchdev mode, but driver later changed to not create netdev for eswitch manager once in switchdev mode. So, UC address event should be handled. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: E-Switch, Consider host PF for inline mode and vlan popBodong Wang3-6/+34
When ECPF is the eswitch manager, host PF is treated like other VFs. Driver should do the same for inline mode and vlan pop. Add new iterators to include host PF if ECPF is the eswitch manager. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: E-Switch, Use iterator for vlan and min-inline setupsBodong Wang1-6/+6
Use the defined iterators to traversal VF reps/vport. Also, rely on num of VFs rather than the counter of enabled vports as PF will also be enabled from ECPF side, and the counter will be different from num of VFs. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: E-Switch, Reg/unreg function changed event at correct stageBodong Wang3-31/+26
When driver is doing eswitch mode change, it's critical to keep number of enabled VFs unchanged. However, it can be changed on the fly once function changed event is registered. To remove this uncertainty, function changed event should not be registered before all setups, and first be unregistered before all cleanups. Wrap this functionality together with vport event handler. Fixes: 61fc880839e6 ("net/mlx5: E-Switch, Handle representors creation in handler context") Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: E-Switch, Consolidate eswitch function number of VFsBodong Wang4-88/+90
Enabled number of VFs is key for eswich manager to do flow steering initialization and vport configurations. However, the number of enabled VFs may come from two sources as below. PF: num of VFs is provided by enabled SR-IOV of itself. ECPF: num of VFs is provided by enabled SR-IOV from its peer PF. And SR-IOV can't be enabled from ECPF itself. Current driver handles the two cases in different stages and passing the number of enabled VFs among a large scope of internal functions. It is usually hard to find out where is the real number of VFs from due to layers of argument pass-in. This patch consolidated that number from the entry point of doing eswitch setup, and maintained a copy so that eswitch functions can refer to it directly. Eswitch driver shall always use this number when referring to enabled number of VFs, don't use other numbers such as from SR-IOV. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: E-Switch, Refactor eswitch SR-IOV interfaceBodong Wang10-73/+74
Devlink eswitch mode is not necessarily related to SR-IOV, e.g, ECPF can be at offload mode when SR-IOV is not enabled. Rename the interface and eswitch mode names to decouple from SR-IOV, and cleanup eswitch messages accordingly. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: Handle host PF vport mac/guid for ECPFBodong Wang8-17/+25
When ECPF is eswitch manager, it has the privilege to query and configure the mac and node guid of host PF. While vport number of host PF is 0, the vport command should be issued with other_vport set in this case as the cmd is issued by ECPF vport(0xfffe). Add a specific function to query own vport mac. Low level functions are used by vport manager to query/modify any vport mac and node guid. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: E-Switch, Use correct flags when configuring vlanBodong Wang1-1/+4
Before the offending commit, vlan will be configured if either vlan or qos is set. After the change with new set flags, function callers should provide flags accordingly. Fixes: e33dfe316cf3 ("net/mlx5: E-Switch, Allow fine tuning of eswitch vport push/pop vlan") Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: Reduce dependency on enabled_vfs counter and num_vfsParav Pandit1-18/+4
While enabling SR-IOV, PCI core already checks that if SR-IOV is already enabled, it returns failure error code. Hence, remove such duplicate check from mlx5_core driver. While at it, make mlx5_device_disable_sriov() to perform cleanup of VFs in reverse order of mlx5_device_enable_sriov(). Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: Don't handle VF func change if host PF is disabledBodong Wang1-1/+4
When ECPF eswitch manager is at offloads mode, it monitors functions changed event from host PF side and acts according to the number of VFs enabled/disabled. As ECPF and host PF work in two independent hosts, it's possible that host PF OS reboots but ECPF system is still kept on and continues monitoring events from host PF. When kernel from host PF side is booting, PCI iov driver does sriov_init and compute_max_vf_buses by iterating over all valid num of VFs. This triggers FLR and generates functions changed events, even though host PF HCA is not enabled at this time. However, ECPF is not aware of this information, and still handles these events as usual. ECPF system will see massive number of reps are created, but destroyed immediately once creation finished. To eliminate this noise, a bit is added to host parameter context to indicate host PF is disabled. ECPF will not handle the VF changed event if this bit is set. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: Limit scope of mlx5_get_next_phys_dev() to PCI PF devicesParav Pandit1-1/+8
As mlx5_get_next_phys_dev is used only for PCI PF devices use case, limit it to search only for PCI devices. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: Move pci status reg access mutex to mlx5_pci_initParav Pandit1-1/+1
mlx5_pci_init() performs pci specific initialization of the mlx5_core_dev struct. Hence move pci_status_mutex to pci initialization routine mlx5_pci_init(). This allows reusing mlx5_mdev_init() to non PCI devices. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: Rename mlx5_pci_dev_type to mlx5_coredev_typeHuy Nguyen1-2/+3
Rename mlx5_pci_dev_type to mlx5_coredev_type to distinguish different mlx5 device types. mlx5_coredev_type represents mlx5_core_dev instance type. Hence keep mlx5_coredev_type in mlx5_core_dev structure. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Vu Pham <vuhuong@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01RDMA/mlx5: Cleanup rep when doing unloadBodong Wang1-7/+11
When an IB rep is loaded, netdev for the same vport is saved for later reference. However, it's not cleaned up when doing unload. For ECPF, kernel crashes when driver is referring to the already removed netdev. Following steps lead to a shown call trace: 1. Create n VFs from host PF 2. Distroy the VFs 3. Run "rdma link" from ARM Call trace: mlx5_ib_get_netdev+0x9c/0xe8 [mlx5_ib] mlx5_query_port_roce+0x268/0x558 [mlx5_ib] mlx5_ib_rep_query_port+0x14/0x34 [mlx5_ib] ib_query_port+0x9c/0xfc [ib_core] fill_port_info+0x74/0x28c [ib_core] nldev_port_get_doit+0x1a8/0x1e8 [ib_core] rdma_nl_rcv_msg+0x16c/0x1c0 [ib_core] rdma_nl_rcv+0xe8/0x144 [ib_core] netlink_unicast+0x184/0x214 netlink_sendmsg+0x288/0x354 sock_sendmsg+0x18/0x2c __sys_sendto+0xbc/0x138 __arm64_sys_sendto+0x28/0x34 el0_svc_common+0xb0/0x100 el0_svc_handler+0x6c/0x84 el0_svc+0x8/0xc Cleanup the rep and netdev reference when unloading IB rep. Fixes: 26628e2d58c9 ("RDMA/mlx5: Move to single device multiport ports in switchdev mode") Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01{IB, net}/mlx5: E-Switch, Use index of rep for vport to IB port mappingBodong Wang3-3/+3
In the single IB device mode, the mapping between vport number and rep relies on a counter. However for dynamic vport allocation, it is desired to keep consistent map of eswitch vport and IB port. Hence, simplify code to remove the free running counter and instead use the available vport index during load/unload sequence from the eswitch. Signed-off-by: Bodong Wang <bodong@mellanox.com> Suggested-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-01net/mlx5: E-Switch, Use vport index when init repBodong Wang1-3/+3
Driver is referring to the array index when doing rep initialization, using vport is confusing as it's normally interpreted as vport number. This patch doesn't change any functionality. Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-28IB/hfi1: No need to use try_module_get for debugfsDennis Dalessandro1-3/+2
The call in debugfs.c for try_module_get() is not needed. A reference to the module will be taken by the VFS layer as long as the owner field is set in the file ops struct. So set this as well as remove the call. Suggested-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/rdmavt: Add trace for map_mr_sgMike Marciniszyn2-0/+37
Add trace to debug map_mr_sg handling. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/rdmavt: Enhance trace information for FRWR debugMike Marciniszyn2-4/+18
This patch enhances the MR trace information to enable more focused debug of MR issues. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/hfi1: Add missing INVALIDATE opcodes for traceMike Marciniszyn1-0/+2
This was missed in the original implementation of the memory management extensions. Fixes: 0db3dfa03c08 ("IB/hfi1: Work request processing for fast register mr and invalidate") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/hfi1: Reduce excessive aspm inlinesMichael J. Ruhl4-259/+280
Uninline the aspm API since it increases code space for no reason. Move the aspm module param to the new aspm C file. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{rdmavt, hfi1, qib}: Add helpers to hide SWQE WR detailsMichael J. Ruhl5-27/+29
Add some helper functions to hide struct rvt_swqe details. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPsMichael J. Ruhl6-37/+86
Historically rdmavt destroy_ah() has returned an -EBUSY when the AH has a non-zero reference count. IBTA 11.2.2 notes no such return value or error case: Output Modifiers: - Verb results: - Operation completed successfully. - Invalid HCA handle. - Invalid address handle. ULPs never test for this error and this will leak memory. The reference count exists to allow for driver independent progress mechanisms to process UD SWQEs in parallel with post sends. The SWQE will hold a reference count until the UD SWQE completes and then drops the reference. Fix by removing need to reference count the AH. Add a UD specific allocation to each SWQE entry to cache the necessary information for independent progress. Copy the information during the post send processing. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/rdmavt: Set QP allowed opcodes after QP allocationMichael J. Ruhl1-23/+12
Currently QP allowed_ops is set after the QP is completely initialized. This curtails the use of this optimization for any initialization before allowed_ops is set. Fix by adding a helper to determine the correct allowed_ops and moving the setting of the allowed_ops to just after QP allocation. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{hfi1, qib, rdmavt}: Put qp in error state when cq is fullKamenee Arumugam9-20/+30
When a completion queue is full, the associated queue pairs are not put into the error state. According to the IBTA specification, this is a violation. Quote from IBTA spec: C9-218: A Requester Class F error occurs when the CQ is inaccessible or full and an attempt is made to complete a WQE. The Affected QP shall be moved to the error state and affiliated asynchronous errors generated as described in 11.6.3.1 Affiliated Asynchronous Events on page 678. The current WQE and any subsequent WQEs are left in an unknown state. C11-37: The CI shall generate a CQ Error when a CQ overrun is detected. This condition will result in an Affiliated Asynchronous Error for any associated Work Queues when they attempt to use that CQ. Completions can no longer be added to the CQ. It is not guaranteed that completions present in the CQ at the time the error occurred can be retrieved. Possible causes include a CQ overrun or a CQ protection error. Put the qp in error state when cq is full. Implement a state called full to continue to put other associated QPs in error state. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/rdmavt: Fracture single lock used for posting and processing RWQEsKamenee Arumugam3-60/+90
Usage of single lock prevents fetching posted and processing receive work queue entries from progressing simultaneously and impacts overall performance. Fracture the single lock used for posting and processing Receive Work Queue Entries (RWQEs) to allow the circular buffer to be filled and emptied at the same time. Two new spinlocks - one for the producers and one for the consumers used for posting and processing RWQEs simultaneously and the two indices are define on two different cache lines. The threshold count is used to avoid reading other index in different cache line every time. Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/hfi1: Move receive work queue struct into uapi directoryKamenee Arumugam4-71/+152
The rvt_rwqe and rvt_rwq struct elements are shared between rdmavt and the providers but are not in uapi directory. As per the comment in https://marc.info/?l=linux-rdma&m=152296522708522&w=2, The hfi1 driver and the rdma core driver are not using shared structures in the uapi directory. Move rvt_rwqe and rvt_rwq struct into rvt-abi.h header in uapi directory. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/hfi1: Move rvt_cq_wc struct into uapi directoryKamenee Arumugam2-71/+125
The rvt_cq_wc struct elements are shared between rdmavt and the providers but not in uapi directory. As per the comment in https://marc.info/?l=linux-rdma&m=152296522708522&w=2 The hfi1 driver and the rdma core driver are not using shared structures in the uapi directory. In that case, move rvt_cq_wc struct into the rvt-abi.h header file and create a rvt_k_cq_w for the kernel completion queue. Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28Merge tag 'v5.2-rc6' into rdma.git for-nextJason Gunthorpe10620-75203/+16293
For dependencies in next patches. Resolve conflicts: - Use uverbs_get_cleared_udata() with new cq allocation flow - Continue to delete nes despite SPDX conflict - Resolve list appends in mlx5_command_str() - Use u16 for vport_rule stuff - Resolve list appends in struct ib_client Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-26net/mlx5: E-Switch, Enable vport metadata matching if firmware supports itJianbo Liu1-0/+23
As the ingress ACL rules save vhca id and vport number to packet's metadata REG_C_0, and the metadata matching for the rules in both fast path and slow path are all added, enable this feature if supported. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-26RDMA/mlx5: Add vport metadata matching for IB representorsJianbo Liu1-9/+36
If vport metadata matching is enabled in eswitch, the rule created must be changed to match on the metadata, instead of source port. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-26net/mlx5: E-Switch, Add match on vport metadata for rule in slow pathJianbo Liu1-35/+107
In slow path, packet that not matched by any offloaded rule is forwarded to eswitch vport manager for further processing. Add matching on metadata for peer miss rules in FDB, and rules which forward packet to correct representor in esw manager NIC_RX table. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-26net/mlx5: E-Switch, Pass metadata from FDB to eswitch managerJianbo Liu1-0/+64
In order to do matching on metadata in slow path when demuxing traffic to representors, explicitly enable the feature that allows HW to pass metadata REG_C_0 from FDB to eswitch manager NIC_RX table. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-26net/mlx5: E-Switch, Add query and modify esw vport context functionsJianbo Liu2-0/+29
Add esw vport query and modify functions, and exposing them is needed for enabling or disabling registers passed as metatdata to vport NIC_RX table in slow path. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-26net/mlx5: E-Switch, Add match on vport metadata for rule in fast pathJianbo Liu1-34/+51
If FW's capabilities and configurations meet the requirement of vport metadata matching, this feature will be used. As the information about vport number and vhca_id related to packet is already stored to its metadata register, which is used as an indicator for perticular vport, now we can change to match on this metadata for all the offloading rules in fast path. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-26net/mlx5e: Specifying known origin of packets matching the flowJianbo Liu2-0/+5
In vport metadata matching, source port number is replaced by metadata. While FW has no idea about what it is in the metadata, a syndrome will happen. Specify a known origin to avoid the syndrome. However, there is no functional change because ANY_VPORT (0) is filled in flow_source, the same default value as before, as a pre-step towards metadata matching for fast path. There are two other values can be filled in flow_source. When setting 0x1, packet matching this rule is from uplink, while 0x2 is for packet from other local vports. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-26net/mlx5: E-Switch, Tag packet with vport number in VF vports and uplink ingress ACLsJianbo Liu3-36/+155
When a dual-port VHCA sends a RoCE packet on its non-native port, and the packet arrives to its affiliated vport FDB, a mismatch might occur on the rules that match the packet source vport as it is not represented by single VHCA only in this case. So we change to match on metadata instead of source vport. To do that, a rule is created in all vports and uplink ingress ACLs, to save the source vport number and vhca id in the packet's metadata in order to match on it later. The metadata register used is the first of the 32-bit type C registers. It can be used for matching and header modify operations. The higher 16 bits of this register are for vhca id, and the lower 16 ones is for vport number. This change is not for dual-port RoCE only. If HW and FW allow, the vport metadata matching is enabled by default. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-26net/mlx5: Add flow context for flow tagJianbo Liu10-41/+60
Refactor the flow data structures, add new flow_context and move flow_tag into it, as flow_tag doesn't belong to the rule action. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-26net/mlx5: Introduce a helper API to check VF vportParav Pandit2-0/+8
Introduce a helper API mlx5_eswitch_is_vf_vport() to check if a given vport_num belongs to VF or not. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jianbo Liu <jianbol@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-26net/mlx5: Support allocating modify header context from ingress ACLJianbo Liu1-0/+4
That modify header action can be then attached to a steering rule in the ingress ACL. Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-26net/mlx5: Get vport ACL namespace by vport indexJianbo Liu1-2/+2
The ingress and egress ACL root namespaces are created per vport and stored into arrays. However, the vport number is not the same as the index. Passing the array index, instead of vport number, to get the correct ingress and egress acl namespace. Fixes: 9b93ab981e3b ("net/mlx5: Separate ingress/egress namespaces for each vport") Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-25RDMA/hns: fix spelling mistake "attatch" -> "attach"Colin Ian King1-1/+1
There is a spelling mistake in an dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-25RDMA/netlink: Audit policy settings for netlink attributesDoug Ledford1-13/+12
For all string attributes for which we don't currently accept the element as input, we only use it as output, set the string length to RDMA_NLDEV_ATTR_EMPTY_STRING which is defined as 1. That way we will only accept a null string for that element. This will prevent someone from writing a new input routine that uses the element without also updating the policy to have a valid value. Also while there, make sure the existing entries that are valid have the correct policy, if not, correct the policy. Remove unnecessary checks for nla_strlcpy() overflow once the policy has been set correctly. Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-25RDMA/hns: Cleanup unnecessary exported symbolsLijun Ou12-56/+16
This patch removes the hns-roce.ko for cleanup all the exported symbols in common part. Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-25docs: infiniband: convert docs to ReST and rename to *.rstMauro Carvalho Chehab2-2/+2
The InfiniBand docs are plain text with no markups. So, all we needed to do were to add the title markups and some markup sequences in order to properly parse tables, lists and literal blocks. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-25RDMA/hns: Fix an error code in hns_roce_set_user_sq_size()Dan Carpenter1-2/+2
This function is supposed to return negative kernel error codes but here it returns CMD_RST_PRC_EBUSY (2). The error code eventually gets passed to IS_ERR() and since it's not an error pointer it leads to an Oops in hns_roce_v1_rsv_lp_qp() Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-25RDMA/hns: fix potential integer overflow on left shiftColin Ian King1-1/+1
There is a potential integer overflow when int i is left shifted as this is evaluated using 32 bit arithmetic but is being used in a context that expects an expression of type dma_addr_t. Fix this by casting integer i to dma_addr_t before shifting to avoid the overflow. Addresses-Coverity: ("Unintentional integer overflow") Fixes: 2ac0bc5e725e ("RDMA/hns: Add a group interfaces for optimizing buffers getting flow") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24net/mlx5: Convert mkey_table to XArrayMatthew Wilcox5-44/+29
The lock protecting the data structure does not need to be an rwlock. The only read access to the lock is in an error path, and if that's limiting your scalability, you have bigger performance problems. Eliminate mlx5_mkey_table in favour of using the xarray directly. reg_mr_callback must use GFP_ATOMIC for allocating XArray nodes as it may be called in interrupt context. This also fixes a minor bug where SRCU locking was being used on the radix tree read side, when RCU was needed too. Signed-off-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.