aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-11-14Sweep additional floors of strcpy in .get_drvinfo routinesRick Jones17-60/+74
Perform another round of floor sweeping, converting the .get_drvinfo routines of additional drivers from strcpy to strlcpy along with some conversion of sprintf to snprintf. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14fsl_pq_mdio: Clean up tbi address configurationAndy Fleming1-45/+8
The code for setting the address of the internal TBI PHY was convoluted enough without a maze of ifdefs. Clean it up a bit so we allow the logic to fail down to -ENODEV at the end of the if/else ladder, rather than using ifdefs to repeat the same failure code over and over. Also, remove the support for the auto-configuration. I'm not aware of anyone using it, and it ends up using the bus mutex before it's been initialized. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14net-forcedeth: Add internal loopback support for forcedeth NICs.Sanjay Hortikar1-1/+155
Support enabling/disabling/querying internal loopback mode for forcedeth NICs using ethtool. Signed-off-by: Sanjay Hortikar <horti@google.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13net: introduce ethernet teaming deviceJiri Pirko7-0/+1880
This patch introduces new network device called team. It supposes to be very fast, simple, userspace-driven alternative to existing bonding driver. Userspace library called libteam with couple of demo apps is available here: https://github.com/jpirko/libteam Note it's still in its dipers atm. team<->libteam use generic netlink for communication. That and rtnl suppose to be the only way to configure team device, no sysfs etc. Python binding of libteam was recently introduced. Daemon providing arpmon/miimon active-backup functionality will be introduced shortly. All what's necessary is already implemented in kernel team driver. v7->v8: - check ndo_ndo_vlan_rx_[add/kill]_vid functions before calling them. - use dev_kfree_skb_any() instead of dev_kfree_skb() v6->v7: - transmit and receive functions are not checked in hot paths. That also resolves memory leak on transmit when no port is present v5->v6: - changed couple of _rcu calls to non _rcu ones in non-readers v4->v5: - team_change_mtu() uses team->lock while travesing though port list - mac address changes are moved completely to jurisdiction of userspace daemon. This way the daemon can do FOM1, FOM2 and possibly other weird things with mac addresses. Only round-robin mode sets up all ports to bond's address then enslaved. - Extended Kconfig text v3->v4: - remove redundant synchronize_rcu from __team_change_mode() - revert "set and clear of mode_ops happens per pointer, not per byte" - extend comment of function __team_change_mode() v2->v3: - team_change_mtu() uses rcu version of list traversal to unwind - set and clear of mode_ops happens per pointer, not per byte - port hashlist changed to be embedded into team structure - error branch in team_port_enter() does cleanup now - fixed rtln->rtnl v1->v2: - modes are made as modules. Makes team more modular and extendable. - several commenters' nitpicks found on v1 were fixed - several other bugs were fixed. - note I ignored Eric's comment about roundrobin port selector as Eric's way may be easily implemented as another mode (mode "random") in future. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: update driver version to 1.70.35-0Dmitry Kravkov1-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: Remove on-stack napi struct variableAriel Elior1-5/+7
Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: prevent race in statistics flowDmitry Kravkov1-1/+3
The race may cause access of registers while MAC hw block is in reset state. As a result syslog will show error messages. We can prevent this by using state from local variable. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: add fan failure event handlingAriel Elior2-1/+26
Shut down the device in case of fan failure to prevent HW damage. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: remove unused #defineDmitry Kravkov1-7/+0
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: simplify definition of RX_SGE_MASK_LEN and use it.Dmitry Kravkov2-4/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: DCBX: use #define instead of magicDmitry Kravkov2-4/+6
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: propagate DCBX negotiationDmitry Kravkov4-46/+90
We need propagate the DCBX results from PMF to other functions on the same port, in order to properly update netdev structure and allow following new ETS and PFC configurations. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: separate FCoE and iSCSI license initialization.Dmitry Kravkov3-11/+46
FCoE license info must be initialized at probe(), but iSCSI at open(). Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: remove unused variableDmitry Kravkov1-3/+1
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: use rx_queue index for skb_record_rx_queue()Dmitry Kravkov4-2/+4
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: allow FCoE and DCB for 578xxDmitry Kravkov2-3/+3
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12be2net: stop issuing FW cmds if any cmd times outSathya Perla3-19/+20
A FW cmd timeout (with a sufficiently large timeout value in the order of tens of seconds) indicates an unresponsive FW. In this state issuing further cmds and waiting for a completion will only stall the process. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12be2net: don't log more than one error on detecting EEH/UE errorsSathya Perla2-13/+5
Currently we're spamming error messages each time a FW cmd call is made while in EEH/UE error state. One log msg on error detection is enough. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12be2net: stop checking the UE registers after an EEH errorSathya Perla1-2/+4
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12be2net: init (vf)_if_handle/vf_pmac_id to handle failure scenariosSathya Perla4-34/+42
Initialize if_handle, vf_if_handle and vf_pmac_id with "-1" so that in failure cases when be_clear() is called, we can skip over if_destroy/pmac_del cmds if they have not been created. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08ll_temac: Add support for phy_mii_ioctlRicardo Ribalda1-0/+14
This patch enables the ioctl support for the driver. So userspace programs like mii-tool can work. Resend in merge window Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08sweep the floors and convert some .get_drvinfo routines to strlcpyRick Jones38-136/+166
Per the mention made by Ben Hutchings that strlcpy is now the preferred string copy routine for a .get_drvinfo routine, do a bit of floor sweeping and convert some of the as-yet unconverted ethernet drivers to it. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08net: better pcpu data alignmentEric Dumazet1-1/+1
Tunnels can force an alignment of their percpu data to reduce number of cache lines used in fast path, or read in .ndo_get_stats() percpu_alloc() is a very fine grained allocator, so any small hole will be used anyway. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08sunhme: Allow usage on SBI based SBus systemsoftedal1-1/+1
To prevent the SBus driver for Sun Happy Meal cards from being loaded for PCI cards utilizing the same chipset, a filter was added to the probe function in commit 0b492fce3d72d982a7981905f85484a1e1ba7fde. The filter was implemented by checking the name of the parent node in the OF tree. This patch extends this filter, so that the driver will load on SBus systems that are based upon SBI SBus Bridges. Signed-off-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08Fix incorrect usage of NET_IP_ALIGNNico Erfurth1-3/+4
The driver used NET_IP_ALIGN to remove some additional padding inside of the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2 which removed the correct amount of bytes. On MCORE2-machines commit ea812ca1b06113597adcd8e70c0f84a413d97544 introduces a change which sets NET_IP_ALIGN to 0 by default. Which triggered the bug on these machines. This fix introduces a new RXW_PADDING define and uses this instead of NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which is provided by SMSC. Signed-off-by: Nico Erfurth <ne@erfurth.eu> Tested-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08r8169: increase the delay parameter of pm_schedule_suspendhayeswang1-1/+1
The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds from link down to link up. If the delay of pm_schedule_suspend is not long enough, the device would enter runtime_suspend before link up. After link up, the device would wake up and reset PHY again. Then, you would find the driver keep in a loop of runtime_suspend and rumtime_resume. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds29-244/+274
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
2011-11-07forcedeth: fix a few sparse warnings (variable shadowing)david decotigny1-17/+17
This fixes the following sparse warnings: drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: Improve stats countersMandeep Baines1-0/+4
Rx byte count was off; instead use the hardware's count. Tx packet count was counting pre-TSO packets; instead count on-the-wire packets. Report hardware dropped frame count as rx_fifo_errors. - The count of transmitted packets reported by the forcedeth driver reports pre-TSO (TCP Segmentation Offload) packet counts and not the count of the number of packets sent on the wire. This change fixes the forcedeth driver to report the correct count. Fixed the code by copying the count stored in the NIC H/W to the value reported by the driver. - Count rx_drop_frame errors as rx_fifo_errors: We see a lot of rx_drop_frame errors if we disable the rx bottom-halves for too long. Normally, rx_fifo_errors would be counted in this case. The rx_drop_frame error count is private to forcedeth and is not reported by ifconfig or sysfs. The rx_fifo_errors count is currently unused in the forcedeth driver. It is reported by ifconfig as overruns. This change reports rx_drop_frame errors as rx_fifo_errors. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: remove unneeded stats updatesdavid decotigny1-34/+1
Function ndo_get_stats() updates most of the stats from hardware registers, making the manual updates un-needed. This change removes these manual updates. Main exception is rx_missed_errors which needs manual update. Another exception is rx_packets, still updated manually in this commit to make sure this patch doesn't change behavior of driver. This will be addressed by a future patch. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: Acknowledge only interrupts that are being processedMike Ditto1-5/+8
This is to avoid a race, accidentally acknowledging an interrupt that we didn't notice and won't immediately process. This is based solely on code inspection; it is not known if there was an actual bug here. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: fix race when unloading moduledavid decotigny1-1/+1
When forcedeth module is unloaded, there exists a path that can lead to mod_timer() after del_timer_sync(), causing an oops. This patch short-circuits this unneeded path, which originates in nv_get_ethtool_stats(). Tested: x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic + rmmod/modprobe/ifconfig in a loop Initial-Author: Salman Qazi <sqazi@google.com> Discussion: http://patchwork.ozlabs.org/patch/123548/ Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07device-mapper: using EXPORT_SYBOL in dm-space-map-checker.c needs export.hStephen Rothwell1-0/+1
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07device-mapper: dm-bufio.c needs to include module.hStephen Rothwell1-0/+1
since it uses the module facilities. Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07drivers/md: change module.h -> export.h in persistent-data/dm-*Paul Gortmaker4-4/+4
For the files which are not themselves modular, we can change them to include only the smaller export.h since all they are doing is looking for EXPORT_SYMBOL. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07usbnet: fix oops in usbnet_start_xmitKonstantin Khlebnikov1-1/+2
This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491e SKB can be NULL at this point, at least for cdc-ncm. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07ixgbe: Fix compile for kernel without CONFIG_PCI_IOV definedRose, Gregory V2-2/+4
Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not defined. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds15-244/+464
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: cpuidle: Single/Global registration of idle states cpuidle: Split cpuidle_state structure and move per-cpu statistics fields cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare() cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning ACPI: Export FADT pm_profile integer value to userspace thermal: Prevent polling from happening during system suspend ACPI: Drop ACPI_NO_HARDWARE_INIT ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast() PNPACPI: Simplify disabled resource registration ACPI: Fix possible recursive locking in hwregs.c ACPI: use kstrdup() mrst pmu: update comment tools/power turbostat: less verbose debugging
2011-11-07Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds30-2626/+2913
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (40 commits) vmwgfx: Snoop DMA transfers with non-covering sizes vmwgfx: Move the prefered mode first in the list vmwgfx: Unreference surface on cursor error path vmwgfx: Free prefered mode on error path vmwgfx: Use pointer return error codes vmwgfx: Fix hw cursor position vmwgfx: Infrastructure for explicit placement vmwgfx: Make the preferred autofit mode have a 60Hz vrefresh vmwgfx: Remove screen object active list vmwgfx: Screen object cleanups drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2 drm/radeon/kms: don't poll forever if MC GDDR link training fails drm/radeon/kms: fix DP setup on TRAVIS bridges drm/radeon/kms: set HPD polarity in hpd_init() drm/radeon/kms: add MSI module parameter drm/radeon/kms: Add MSI quirk for Dell RS690 drm/radeon/kms: Add MSI quirk for HP RS690 drm/radeon/kms: split MSI check into a separate function vmwgfx: Reinstate the update_layout ioctl drm/radeon/kms: always do extended edid probe ...
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds130-3624/+7010
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-11-07vmwgfx: Snoop DMA transfers with non-covering sizesJakob Bornecrantz1-9/+21
Enough to get cursors working under Wayland. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Move the prefered mode first in the listJakob Bornecrantz1-0/+4
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Unreference surface on cursor error pathJakob Bornecrantz1-0/+1
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Free prefered mode on error pathJakob Bornecrantz1-6/+11
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Use pointer return error codesJakob Bornecrantz1-1/+1
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Fix hw cursor positionThomas Hellstrom1-2/+5
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Infrastructure for explicit placementThomas Hellstrom3-24/+30
Make it possible to use explicit placement (although not hooked up with a user-space interface yet) and relax the single framebuffer limit to only apply to implicit placement. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Make the preferred autofit mode have a 60Hz vrefreshThomas Hellstrom1-1/+23
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Remove screen object active listThomas Hellstrom1-37/+15
It isn't used for anything. Replace with an active bool. Also make a couple of functions return void instead of int since their return value wasn't checked anyway. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakbo Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Screen object cleanupsThomas Hellstrom1-14/+2
Remove unused member. No need to pin / unpin fb. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.