aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-03-08clk: qcom: gcc-ipq806x: add unusued flag for critical clockAnsuel Smith1-4/+5
Some clocks are used by other devices present on the SoC. For example the gsbi4_h_clk is used by RPM and is if disabled cause the RPM to reject any regulator change command. These clock should never be disabled. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-9-ansuelsmth@gmail.com
2022-03-08clk: qcom: gcc-ipq806x: add additional freq nss coresAnsuel Smith1-3/+21
Ipq8065 SoC (an evolution of ipq8064 SoC) contains nss cores that can be clocked to 800MHz. Add these missing freq to the gcc driver. Set the freq_tbl for the ubi32_cores to the correct values based on the machine compatible. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-8-ansuelsmth@gmail.com
2022-03-08clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parentsAnsuel Smith1-34/+34
Use ARRAY_SIZE for num_parents instead of hardcoding the value. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-7-ansuelsmth@gmail.com
2022-03-08clk: qcom: gcc-ipq806x: convert parent_names to parent_dataAnsuel Smith1-113/+173
Convert parent_names to parent_data to modernize the driver. Where possible use parent_hws directly. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-6-ansuelsmth@gmail.com
2022-03-08clk: qcom: gcc-ipq806x: fix wrong naming for gcc_pxo_pll8_pll0Ansuel Smith1-10/+10
Parent gcc_pxo_pll8_pll0 had the parent definition and parent map swapped. Fix this naming error. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220226135235.10051-5-ansuelsmth@gmail.com
2022-03-08clk: qcom: Add SDX65 APCS clock controller supportRohit Agarwal1-3/+3
Update APCS Kconfig to reflect support for SDX65 APCS clock controller. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1645505785-2271-6-git-send-email-quic_rohiagar@quicinc.com
2022-03-08clk: qcom: Add A7 PLL support for SDX65Rohit Agarwal1-3/+3
Update A7 PLL Kconfig to reflect support for SDX65. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1645505785-2271-3-git-send-email-quic_rohiagar@quicinc.com
2022-03-08clk: qcom: Add GPU clock controller driver for SM6350Konrad Dybcio3-0/+530
Add support for the GPU clock controller found on SM6350. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220222011534.3502-4-konrad.dybcio@somainline.org
2022-03-08clk: qcom: Add display clock controller driver for SM6350Konrad Dybcio3-0/+807
Add support for the display clock controller found on SM6350. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220222011534.3502-2-konrad.dybcio@somainline.org
2022-02-24clk: qcom: rpmhcc: add sc8280xp support to the RPMh clock controllerBjorn Andersson1-0/+18
The Qualcomm SC8280XP platform exposes 5 clocks through the RPMh clock controller. Add these, and the relates active-only variants, to the RPMh clock controller driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220223044516.3776637-2-bjorn.andersson@linaro.org
2022-02-24clk: qcom: ipq8074: Use floor ops for SDCC1 clockDirk Buchwalder1-1/+1
Use floor ops on SDCC1 APPS clock in order to round down selected clock frequency and avoid overclocking SD/eMMC cards. For example, currently HS200 cards were failling tuning as they were actually being clocked at 384MHz instead of 192MHz. This caused some boards to disable 1.8V I/O and force the eMMC into the standard HS mode (50MHz) and that appeared to work despite the eMMC being overclocked to 96Mhz in that case. There was a previous commit to use floor ops on SDCC clocks, but it looks to have only covered SDCC2 clock. Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks") Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de> Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220210173100.505128-1-robimarko@gmail.com
2022-02-10clk: qcom: Add MSM8226 Multimedia Clock Controller supportBartosz Dudziak1-5/+201
Modify the existing MSM8974 multimedia clock controller driver to support the MMCC found on MSM8226 based devices. This should allow most multimedia device drivers to probe and control their clocks. Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220207185411.19118-3-bartosz.dudziak@snejp.pl
2022-02-10clk: qcom: gcc-msm8996: start getting rid of xo clkDmitry Baryshkov1-11/+11
The "xo" fixed_factor clock is a leftover/hack from a time when we couldn't make rpmhcc the root of all clocks. It is going to be removed once all users of this clock are converted to use clocks specified through the DTS. Replace internal usage of the xo clock with the cxo (RPM_SMD_BB_CLK1) parent, specifying xo_board as a fallback. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-17-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: use parent_hws/_data instead of parent_namesDmitry Baryshkov1-215/+463
Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-16-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: move clock parent tables downDmitry Baryshkov1-92/+92
Move clock parent tables down, after the GPLL declrataions, so that we can use gpll hw clock fields in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-15-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: drop unsupported clock sourcesDmitry Baryshkov1-49/+6
In preparation of updating the msm8996 gcc driver, drop all unsupported GPLL sources (gpll1/gpll1_early_div, gpll2/gpll2_early and gpll3). Downstream kernel also does not provide support for these GPLL sources, so it is safe to drop them. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-14-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gcc-msm8996: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov1-61/+61
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-13-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: videocc-sc7180: use parent_hws instead of parent_dataDmitry Baryshkov1-4/+4
If all parents are specified as clk_hw, we can use parent_hws instead of parent_data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-12-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: convert to parent_hws/_dataDmitry Baryshkov1-142/+158
Convert the clock driver to specify parent hws/data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-11-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: move clock parent tables downDmitry Baryshkov1-16/+16
Move clock parent tables down, after the PLL declrataions, so that we can use pll hw clock fields in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-10-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: get rid of the test clockDmitry Baryshkov1-3/+0
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-9-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sdm845: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov1-25/+25
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-8-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sc7180: use parent_hws instead of parent_dataDmitry Baryshkov1-77/+79
If all parents are specified as clk_hw, we can use parent_hws instead of parent_data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-7-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sc7180: get rid of the test clockDmitry Baryshkov1-15/+0
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-6-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: camcc-sc7180: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov1-25/+25
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-5-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gpucc-sdm660: use parent_hws instead of parent_dataDmitry Baryshkov1-6/+6
If all parents are specified as clk_hw, we can use parent_hws instead of parent_data. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-4-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gpucc-sdm660: get rid of the test clockDmitry Baryshkov1-1/+0
The test clock isn't in the bindings and apparently it's not used by anyone upstream. Remove it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-3-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: gpucc-sdm660: fix two clocks with parent_namesDmitry Baryshkov1-4/+4
Two clocks are still using parent_names, use parent_hws instead. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211228045415.20543-2-dmitry.baryshkov@linaro.org
2022-02-10clk: qcom: Add display clock controller driver for QCM2290Loic Poulain3-0/+565
Add support for the display clock controller found in QCM2290 based devices. This clock controller feeds the Multimedia Display SubSystem (MDSS). It's a porting of dispcc-scuba GPL-2.0 driver from CAF msm-4.19 kernel: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/dispcc-scuba.c?h=LE.UM.4.4.1.r3 Global clock name references (parent_names) have been replaced by parent_data and parent_hws. Clocks marked enable_safe_config have their clk_rcg2_ops moved to clk_rcg2_shared_ops. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1644432308-21099-2-git-send-email-loic.poulain@linaro.org
2022-02-10clk: qcom: ipq8074: fix PCI-E clock oopsRobert Marko1-10/+9
Fix PCI-E clock related kernel oops that are caused by a missing clock parent. pcie0_rchng_clk_src has num_parents set to 2 but only one parent is actually set via parent_hws, it should also have "XO" defined. This will cause the kernel to panic on a NULL pointer in clk_core_get_parent_by_index(). So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent data. Since there is already an existing static const char * const gcc_xo_gpll0[] used to provide the same parents via parent_names convert those users to clk_parent_data as well. Without this earlycon is needed to even catch the OOPS as it will reset the board before serial is initialized with the following: [ 0.232279] Unable to handle kernel paging request at virtual address 0000a00000000000 [ 0.232322] Mem abort info: [ 0.239094] ESR = 0x96000004 [ 0.241778] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.244908] SET = 0, FnV = 0 [ 0.250377] EA = 0, S1PTW = 0 [ 0.253236] FSC = 0x04: level 0 translation fault [ 0.256277] Data abort info: [ 0.261141] ISV = 0, ISS = 0x00000004 [ 0.264262] CM = 0, WnR = 0 [ 0.267820] [0000a00000000000] address between user and kernel address ranges [ 0.270954] Internal error: Oops: 96000004 [#1] SMP [ 0.278067] Modules linked in: [ 0.282751] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.10 #0 [ 0.285882] Hardware name: Xiaomi AX3600 (DT) [ 0.292043] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.296299] pc : clk_core_get_parent_by_index+0x68/0xec [ 0.303067] lr : __clk_register+0x1d8/0x820 [ 0.308273] sp : ffffffc01111b7d0 [ 0.312438] x29: ffffffc01111b7d0 x28: 0000000000000000 x27: 0000000000000040 [ 0.315919] x26: 0000000000000002 x25: 0000000000000000 x24: ffffff8000308800 [ 0.323037] x23: ffffff8000308850 x22: ffffff8000308880 x21: ffffff8000308828 [ 0.330155] x20: 0000000000000028 x19: ffffff8000309700 x18: 0000000000000020 [ 0.337272] x17: 000000005cc86990 x16: 0000000000000004 x15: ffffff80001d9d0a [ 0.344391] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000006 [ 0.351508] x11: 0000000000000003 x10: 0101010101010101 x9 : 0000000000000000 [ 0.358626] x8 : 7f7f7f7f7f7f7f7f x7 : 6468626f5e626266 x6 : 17000a3a403c1b06 [ 0.365744] x5 : 061b3c403a0a0017 x4 : 0000000000000000 x3 : 0000000000000001 [ 0.372863] x2 : 0000a00000000000 x1 : 0000000000000001 x0 : ffffff8000309700 [ 0.379982] Call trace: [ 0.387091] clk_core_get_parent_by_index+0x68/0xec [ 0.389351] __clk_register+0x1d8/0x820 [ 0.394210] devm_clk_hw_register+0x5c/0xe0 [ 0.398030] devm_clk_register_regmap+0x44/0x8c [ 0.402198] qcom_cc_really_probe+0x17c/0x1d0 [ 0.406711] qcom_cc_probe+0x34/0x44 [ 0.411224] gcc_ipq8074_probe+0x18/0x30 [ 0.414869] platform_probe+0x68/0xe0 [ 0.418776] really_probe.part.0+0x9c/0x30c [ 0.422336] __driver_probe_device+0x98/0x144 [ 0.426329] driver_probe_device+0x44/0x11c [ 0.430842] __device_attach_driver+0xb4/0x120 [ 0.434836] bus_for_each_drv+0x68/0xb0 [ 0.439349] __device_attach+0xb0/0x170 [ 0.443081] device_initial_probe+0x14/0x20 [ 0.446901] bus_probe_device+0x9c/0xa4 [ 0.451067] device_add+0x35c/0x834 [ 0.454886] of_device_add+0x54/0x64 [ 0.458360] of_platform_device_create_pdata+0xc0/0x100 [ 0.462181] of_platform_bus_create+0x114/0x370 [ 0.467128] of_platform_bus_create+0x15c/0x370 [ 0.471641] of_platform_populate+0x50/0xcc [ 0.476155] of_platform_default_populate_init+0xa8/0xc8 [ 0.480324] do_one_initcall+0x50/0x1b0 [ 0.485877] kernel_init_freeable+0x234/0x29c [ 0.489436] kernel_init+0x24/0x120 [ 0.493948] ret_from_fork+0x10/0x20 [ 0.497253] Code: d50323bf d65f03c0 f94002a2 b4000302 (f9400042) [ 0.501079] ---[ end trace 4ca7e1129da2abce ]--- Fixes: f0cfcf1a ("clk: qcom: ipq8074: Add missing clocks for pcie") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211220114119.465247-1-robimarko@gmail.com
2022-01-23Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linuxLinus Torvalds16-31/+29
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
2022-01-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds31-176/+190
Merge yet more updates from Andrew Morton: "This is the post-linux-next queue. Material which was based on or dependent upon material which was in -next. 69 patches. Subsystems affected by this patch series: mm (migration and zsmalloc), sysctl, proc, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits) mm: hide the FRONTSWAP Kconfig symbol frontswap: remove support for multiple ops mm: mark swap_lock and swap_active_head static frontswap: simplify frontswap_register_ops frontswap: remove frontswap_test mm: simplify try_to_unuse frontswap: remove the frontswap exports frontswap: simplify frontswap_init frontswap: remove frontswap_curr_pages frontswap: remove frontswap_shrink frontswap: remove frontswap_tmem_exclusive_gets frontswap: remove frontswap_writethrough mm: remove cleancache lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() proc: remove PDE_DATA() completely fs: proc: store PDE()->data into inode->i_private zsmalloc: replace get_cpu_var with local_lock zsmalloc: replace per zpage lock with pool->migrate_lock locking/rwlocks: introduce write_lock_nested ...
2022-01-22Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds21-277/+384
Pull more SCSI updates from James Bottomley: "This series is all the stragglers that didn't quite make the first merge window pull. It's mostly minor updates and bug fixes of merge window code" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: nsp_cs: Check of ioremap return value scsi: ufs: ufs-mediatek: Fix error checking in ufs_mtk_init_va09_pwr_ctrl() scsi: ufs: Modify Tactive time setting conditions scsi: efct: Remove useless DMA-32 fallback configuration scsi: message: fusion: mptctl: Use dma_alloc_coherent() scsi: message: fusion: mptsas: Use dma_alloc_coherent() scsi: message: fusion: Use dma_alloc_coherent() in mptsas_exp_repmanufacture_info() scsi: message: fusion: mptbase: Use dma_alloc_coherent() scsi: message: fusion: Use dma_alloc_coherent() in mpt_alloc_fw_memory() scsi: message: fusion: Remove usage of the deprecated "pci-dma-compat.h" API scsi: megaraid: Avoid mismatched storage type sizes scsi: hisi_sas: Remove unused variable and check in hisi_sas_send_ata_reset_each_phy() scsi: aic79xx: Remove redundant error variable scsi: pm80xx: Port reset timeout error handling correction scsi: mpi3mr: Fix formatting problems in some kernel-doc comments scsi: mpi3mr: Fix some spelling mistakes scsi: mpt3sas: Update persistent trigger pages from sysfs interface scsi: core: Fix scsi_mode_select() interface scsi: aacraid: Fix spelling of "its" scsi: qedf: Fix potential dereference of NULL pointer
2022-01-22Merge tag 'ata-5.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds1-1/+1
Pull ATA fix from Damien Le Moal: "A single patch to fix a compilation error in the pata_octeon_cf driver (mips architecture), from me" * tag 'ata-5.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_octeon_cf: fix call to trace_ata_bmdma_stop()
2022-01-22Merge tag 'thermal-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds4-0/+4
Pull more thermal control updates from Rafael Wysocki: "Add device IDs for Raptor Lake to the int340x thermal control driver (Srinivas Pandruvada)" * tag 'thermal-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: int340x: Add Raptor Lake PCI device id thermal: int340x: Support Raptor Lake
2022-01-22Merge tag 'acpi-5.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds5-5/+16
Pull extra ACPI updates from Rafael Wysocki: "These fix and clean up the ACPI CPPC driver on top of the recent changes in it merged previously and add some new device IDs to the ACPI DPTF driver. Specifics: - Fix a recently introduced endianness-related issue in the ACPI CPPC library and clean it up on top of that (Rafael Wysocki) - Add new device IDs for the Raptor Lake SoC to the ACPI DPTF driver (Srinivas Pandruvada)" * tag 'acpi-5.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: DPTF: Support Raptor Lake ACPI: CPPC: Drop redundant local variable from cpc_read() ACPI: CPPC: Fix up I/O port access in cpc_read()
2022-01-22Merge tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds2-123/+10
Pull devicetree fixes and cleanups from Rob Herring: - Fix a regression when probing a child device reusing the parent device's DT node pointer - Refactor of_parse_phandle*() variants to static inlines - Drop Enric Balletbo i Serra as a maintainer - Fix DT schemas with arrays incorrectly encoded as a matrix - Drop unneeded pinctrl properties from schemas - Add SPI peripheral schema to SPI based displays - Clean-up several schema examples - Clean-up trivial-devices.yaml comments - Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei, F(x)tec, 8devices * tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: google,cros-ec: drop Enric Balletbo i Serra from maintainers dt-bindings: display: bridge: drop Enric Balletbo i Serra from maintainers of: Check 'of_node_reused' flag on of_match_device() of: property: define of_property_read_u{8,16,32,64}_array() unconditionally of: base: make small of_parse_phandle() variants static inline dt-bindings: mfd: cirrus,madera: Fix 'interrupts' in example dt-bindings: Fix array schemas encoded as matrices dt-bindings: Drop unnecessary pinctrl properties dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry dt-bindings: mmc: arm,pl18x: Make each example a separate entry dt-bindings: display: Add SPI peripheral schema to SPI based displays scripts/dtc: dtx_diff: remove broken example from help text dt-bindings: trivial-devices: fix double spaces in comments dt-bindings: trivial-devices: fix swapped comments dt-bindings: vendor-prefixes: add Wingtech dt-bindings: vendor-prefixes: add Thundercomm dt-bindings: vendor-prefixes: add Huawei dt-bindings: vendor-prefixes: add F(x)tec dt-bindings: vendor-prefixes: add 8devices dt-bindings: power: reset: gpio-restart: Correct default priority
2022-01-22Merge tag 'for-5.17/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds1-1/+3
Pull more parisc architecture updates from Helge Deller: "Fixes and enhancements: - a memory leak fix in an error path in pdc_stable (Miaoqian Lin) - two compiler warning fixes in the TOC code - added autodetection for currently used console type (serial or graphics) which inserts console=<type> if it's missing" * tag 'for-5.17/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries parisc: Fix missing prototype for 'toc_intr' warning in toc.c parisc: Autodetect default output device and set console= kernel parameter parisc: Use safer strscpy() in setup_cmdline() parisc: Add visible flag to toc_stack variable
2022-01-22Merge tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds2-1/+2
Pull more RISC-V updates from Palmer Dabbelt: - Support for sv48 paging - Hart ID mappings are now sparse, which enables more CPUs to come up on systems with sparse hart IDs - A handful of cleanups and fixes * tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (27 commits) RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULT RISC-V: Remove redundant err variable riscv: dts: sifive unmatched: Add gpio poweroff riscv: canaan: remove useless select of non-existing config SYSCON RISC-V: Do not use cpumask data structure for hartid bitmap RISC-V: Move spinwait booting method to its own config RISC-V: Move the entire hart selection via lottery to SMP RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method RISC-V: Do not print the SBI version during HSM extension boot print RISC-V: Avoid using per cpu array for ordered booting riscv: default to CONFIG_RISCV_SBI_V01=n riscv: fix boolconv.cocci warnings riscv: Explicit comment about user virtual address space size riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo riscv: Implement sv48 support asm-generic: Prepare for riscv use of pud_alloc_one and pud_free riscv: Allow to dynamically define VA_BITS riscv: Introduce functions to switch pt_ops riscv: Split early kasan mapping to prepare sv48 introduction riscv: Move KASAN mapping next to the kernel mapping ...
2022-01-22lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()Vlastimil Babka4-0/+17
Currently, enabling CONFIG_STACKDEPOT means its stack_table will be allocated from memblock, even if stack depot ends up not actually used. The default size of stack_table is 4MB on 32-bit, 8MB on 64-bit. This is fine for use-cases such as KASAN which is also a config option and has overhead on its own. But it's an issue for functionality that has to be actually enabled on boot (page_owner) or depends on hardware (GPU drivers) and thus the memory might be wasted. This was raised as an issue [1] when attempting to add stackdepot support for SLUB's debug object tracking functionality. It's common to build kernels with CONFIG_SLUB_DEBUG and enable slub_debug on boot only when needed, or create only specific kmem caches with debugging for testing purposes. It would thus be more efficient if stackdepot's table was allocated only when actually going to be used. This patch thus makes the allocation (and whole stack_depot_init() call) optional: - Add a CONFIG_STACKDEPOT_ALWAYS_INIT flag to keep using the current well-defined point of allocation as part of mem_init(). Make CONFIG_KASAN select this flag. - Other users have to call stack_depot_init() as part of their own init when it's determined that stack depot will actually be used. This may depend on both config and runtime conditions. Convert current users which are page_owner and several in the DRM subsystem. Same will be done for SLUB later. - Because the init might now be called after the boot-time memblock allocation has given all memory to the buddy allocator, change stack_depot_init() to allocate stack_table with kvmalloc() when memblock is no longer available. Also handle allocation failure by disabling stackdepot (could have theoretically happened even with memblock allocation previously), and don't unnecessarily align the memblock allocation to its own size anymore. [1] https://lore.kernel.org/all/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ Link: https://lkml.kernel.org/r/20211013073005.11351-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Marco Elver <elver@google.com> # stackdepot Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> From: Colin Ian King <colin.king@canonical.com> Subject: lib/stackdepot: fix spelling mistake and grammar in pr_err message There is a spelling mistake of the work allocation so fix this and re-phrase the message to make it easier to read. Link: https://lkml.kernel.org/r/20211015104159.11282-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Vlastimil Babka <vbabka@suse.cz> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup On FLATMEM, we call page_ext_init_flatmem_late() just before kmem_cache_init() which means stack_depot_init() (called by page owner init) will not recognize properly it should use kvmalloc() and not memblock_alloc(). memblock_alloc() will also not issue a warning and return a block memory that can be invalid and cause kernel page fault when saving stacks, as reported by the kernel test robot [1]. Fix this by moving page_ext_init_flatmem_late() below kmem_cache_init() so that slab_is_available() is true during stack_depot_init(). SPARSEMEM doesn't have this issue, as it doesn't do page_ext_init_flatmem_late(), but a different page_ext_init() even later in the boot process. Thanks to Mike Rapoport for pointing out the FLATMEM init ordering issue. While at it, also actually resolve a checkpatch warning in stack_depot_init() from DRM CI, which was supposed to be in the original patch already. [1] https://lore.kernel.org/all/20211014085450.GC18719@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/6abd9213-19a9-6d58-cedc-2414386d2d81@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup3 Due to cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks without backoff") landing recently to -next adding a new stack depot user in drivers/gpu/drm/drm_modeset_lock.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/2a692365-cfa1-64f2-34e0-8aa5674dce5e@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Marco Elver <elver@google.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Oliver Glitta <glittao@gmail.com> Cc: Imran Khan <imran.f.khan@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> From: Vlastimil Babka <vbabka@suse.cz> Subject: lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() - fixup4 Due to 4e66934eaadc ("lib: add reference counting tracking infrastructure") landing recently to net-next adding a new stack depot user in lib/ref_tracker.c we need to add an appropriate call to stack_depot_init() there as well. Link: https://lkml.kernel.org/r/45c1b738-1a2f-5b5f-2f6d-86fab206d01c@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Slab <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22proc: remove PDE_DATA() completelyMuchun Song18-83/+83
Remove PDE_DATA() completely and replace it with pde_data(). [akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c] [akpm@linux-foundation.org: now fix it properly] Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22scsi/sg: move sg-big-buff sysctl to scsi/sg.cXiaoming Ni1-1/+34
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the sg-big-buff sysctl from kernel/sysctl.c to drivers/scsi/sg.c and use register_sysctl() to register the sysctl interface. [mcgrof@kernel.org: commit log update] Link: https://lkml.kernel.org/r/20211124231435.1445213-7-mcgrof@kernel.org Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22random: move the random sysctl declarations to its own fileXiaoming Ni1-2/+12
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the random sysctls to their own file and use register_sysctl_init(). [mcgrof@kernel.org: commit log update to justify the move] Link: https://lkml.kernel.org/r/20211124231435.1445213-3-mcgrof@kernel.org Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22firmware_loader: move firmware sysctl to its own filesXiaoming Ni3-3/+40
Patch series "sysctl: 3rd set of kernel/sysctl cleanups", v2. This is the third set of patches to help address cleaning the kitchen seink in kernel/sysctl.c and to move sysctls away to where they are actually implemented / used. This patch (of 8): kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. So move the firmware configuration sysctl table to the only place where it is used, and make it clear that if sysctls are disabled this is not used. [akpm@linux-foundation.org: export register_firmware_config_sysctl and unregister_firmware_config_sysctl to modules] [akpm@linux-foundation.org: use EXPORT_SYMBOL_NS_GPL instead] [sfr@canb.auug.org.au: fix that so it compiles] Link: https://lkml.kernel.org/r/20211201160626.401d828d@canb.auug.org.au [mcgrof@kernel.org: major commit log update to justify the move] Link: https://lkml.kernel.org/r/20211124231435.1445213-1-mcgrof@kernel.org Link: https://lkml.kernel.org/r/20211124231435.1445213-2-mcgrof@kernel.org Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Stephen Kitt <steve@sk2.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: John Ogness <john.ogness@linutronix.de> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Antti Palosaari <crope@iki.fi> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Mark Fasheh <mark@fasheh.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22cdrom: simplify subdirectory registration with register_sysctl()Luis Chamberlain1-22/+1
There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. // pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH @c1@ expression E1; identifier subdir, sysctls; @@ static struct ctl_table subdir[] = { { .procname = E1, .maxlen = 0, .mode = 0555, .child = sysctls, }, { } }; @c2@ identifier c1.subdir; expression E2; identifier base; @@ static struct ctl_table base[] = { { .procname = E2, .maxlen = 0, .mode = 0555, .child = subdir, }, { } }; @c3@ identifier c2.base; identifier header; @@ header = register_sysctl_table(base); @r1 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.subdir, c1.sysctls; @@ -static struct ctl_table subdir[] = { - { - .procname = E1, - .maxlen = 0, - .mode = 0555, - .child = sysctls, - }, - { } -}; @r2 depends on c1 && c2 && c3@ identifier c1.subdir; expression c2.E2; identifier c2.base; @@ -static struct ctl_table base[] = { - { - .procname = E2, - .maxlen = 0, - .mode = 0555, - .child = subdir, - }, - { } -}; @initialize:python@ @@ def make_my_fresh_expression(s1, s2): return '"' + s1.strip('"') + "/" + s2.strip('"') + '"' @r3 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.sysctls; expression c2.E2; identifier c2.base; identifier c3.header; fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) }; @@ header = -register_sysctl_table(base); +register_sysctl(E3, sysctls); Generated-by: Coccinelle SmPL Link: https://lkml.kernel.org/r/20211123202422.819032-8-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22macintosh/mac_hid.c: simplify subdirectory registration with register_sysctl()Luis Chamberlain1-23/+1
There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. // pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH @c1@ expression E1; identifier subdir, sysctls; @@ static struct ctl_table subdir[] = { { .procname = E1, .maxlen = 0, .mode = 0555, .child = sysctls, }, { } }; @c2@ identifier c1.subdir; expression E2; identifier base; @@ static struct ctl_table base[] = { { .procname = E2, .maxlen = 0, .mode = 0555, .child = subdir, }, { } }; @c3@ identifier c2.base; identifier header; @@ header = register_sysctl_table(base); @r1 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.subdir, c1.sysctls; @@ -static struct ctl_table subdir[] = { - { - .procname = E1, - .maxlen = 0, - .mode = 0555, - .child = sysctls, - }, - { } -}; @r2 depends on c1 && c2 && c3@ identifier c1.subdir; expression c2.E2; identifier c2.base; @@ -static struct ctl_table base[] = { - { - .procname = E2, - .maxlen = 0, - .mode = 0555, - .child = subdir, - }, - { } -}; @initialize:python@ @@ def make_my_fresh_expression(s1, s2): return '"' + s1.strip('"') + "/" + s2.strip('"') + '"' @r3 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.sysctls; expression c2.E2; identifier c2.base; identifier c3.header; fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) }; @@ header = -register_sysctl_table(base); +register_sysctl(E3, sysctls); Generated-by: Coccinelle SmPL Link: https://lkml.kernel.org/r/20211123202422.819032-4-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22i915: simplify subdirectory registration with register_sysctl()Luis Chamberlain1-21/+1
There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. // pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH @c1@ expression E1; identifier subdir, sysctls; @@ static struct ctl_table subdir[] = { { .procname = E1, .maxlen = 0, .mode = 0555, .child = sysctls, }, { } }; @c2@ identifier c1.subdir; expression E2; identifier base; @@ static struct ctl_table base[] = { { .procname = E2, .maxlen = 0, .mode = 0555, .child = subdir, }, { } }; @c3@ identifier c2.base; identifier header; @@ header = register_sysctl_table(base); @r1 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.subdir, c1.sysctls; @@ -static struct ctl_table subdir[] = { - { - .procname = E1, - .maxlen = 0, - .mode = 0555, - .child = sysctls, - }, - { } -}; @r2 depends on c1 && c2 && c3@ identifier c1.subdir; expression c2.E2; identifier c2.base; @@ -static struct ctl_table base[] = { - { - .procname = E2, - .maxlen = 0, - .mode = 0555, - .child = subdir, - }, - { } -}; @initialize:python@ @@ def make_my_fresh_expression(s1, s2): return '"' + s1.strip('"') + "/" + s2.strip('"') + '"' @r3 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.sysctls; expression c2.E2; identifier c2.base; identifier c3.header; fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) }; @@ header = -register_sysctl_table(base); +register_sysctl(E3, sysctls); Generated-by: Coccinelle SmPL Link: https://lkml.kernel.org/r/20211123202422.819032-3-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: David Airlie <airlied@linux.ie> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Mark Fasheh <mark@fasheh.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Qing Wang <wangqing@vivo.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22hpet: simplify subdirectory registration with register_sysctl()Luis Chamberlain1-21/+1
Patch series "sysctl: second set of kernel/sysctl cleanups", v2. This is the 2nd set of kernel/sysctl.c cleanups. The diff stat should reflect how this is a much better way to deal with theses. Fortunately coccinelle can be used to ensure correctness for most of these and/or future merge conflicts. Note that since this is part of a larger effort to cleanup kernel/sysctl.c I think we have no other option but to go with merging these patches in either Andrew's tree or keep them staged in a separate tree and send a merge request later. Otherwise kernel/sysctl.c will end up becoming a sore spot for the next merge window. This patch (of 8): There is no need to user boiler plate code to specify a set of base directories we're going to stuff sysctls under. Simplify this by using register_sysctl() and specifying the directory path directly. // pycocci sysctl-subdir-register-sysctl-simplify.cocci drivers/char/hpet.c @c1@ expression E1; identifier subdir, sysctls; @@ static struct ctl_table subdir[] = { { .procname = E1, .maxlen = 0, .mode = 0555, .child = sysctls, }, { } }; @c2@ identifier c1.subdir; expression E2; identifier base; @@ static struct ctl_table base[] = { { .procname = E2, .maxlen = 0, .mode = 0555, .child = subdir, }, { } }; @c3@ identifier c2.base; identifier header; @@ header = register_sysctl_table(base); @r1 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.subdir, c1.sysctls; @@ -static struct ctl_table subdir[] = { - { - .procname = E1, - .maxlen = 0, - .mode = 0555, - .child = sysctls, - }, - { } -}; @r2 depends on c1 && c2 && c3@ identifier c1.subdir; expression c2.E2; identifier c2.base; @@ -static struct ctl_table base[] = { - { - .procname = E2, - .maxlen = 0, - .mode = 0555, - .child = subdir, - }, - { } -}; @initialize:python@ @@ def make_my_fresh_expression(s1, s2): return '"' + s1.strip('"') + "/" + s2.strip('"') + '"' @r3 depends on c1 && c2 && c3@ expression c1.E1; identifier c1.sysctls; expression c2.E2; identifier c2.base; identifier c3.header; fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) }; @@ header = -register_sysctl_table(base); +register_sysctl(E3, sysctls); Generated-by: Coccinelle SmPL Link: https://lkml.kernel.org/r/20211123202422.819032-1-mcgrof@kernel.org Link: https://lkml.kernel.org/r/20211123202422.819032-2-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <julia.lawall@inria.fr> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Antti Palosaari <crope@iki.fi> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Qing Wang <wangqing@vivo.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Stephen Kitt <steve@sk2.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-21parisc: pdc_stable: Fix memory leak in pdcs_register_pathentriesMiaoqian Lin1-1/+3
kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). Fixes: 73f368cf679b ("Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-01-21Merge branches 'acpi-cppc' and 'acpi-dptf'Rafael J. Wysocki5-5/+16
Merge new ACPI CPPC driver updates and new Raptor Lake DPTF device IDs for 5.17-rc1. * acpi-cppc: ACPI: CPPC: Drop redundant local variable from cpc_read() ACPI: CPPC: Fix up I/O port access in cpc_read() * acpi-dptf: ACPI: DPTF: Support Raptor Lake
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.