aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-07-10sky2: add support for read/write of EEPROMStephen Hemminger1-25/+115
Add get/set eeprom support for sky2. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: unmark as EXPERIMENTALStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: receive fillStephen Hemminger1-22/+14
Simplify receive buffer refill logic. Rather than trying to update incrementally; do receive ring refill at end of receive processing. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: check for more work before leaving NAPIStephen Hemminger1-18/+17
This patch avoids generating another IRQ if more packets arrive while in the NAPI poll routine. Before marking device as finished, it rechecks that the status ring is empty. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: debug interfaceStephen Hemminger3-2/+208
Add an optional debug interface for displaying state of transmit/receive rings. Creates a file debugfs/sky2/ethX for each device that is up. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: carrier managementStephen Hemminger1-7/+4
Make sky2 handle carrier similar to other drivers, eliminate some possible races in carrier state transistions. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sky2: restore workarounds for lost interruptsStephen Hemminger1-1/+8
This patch restores a couple of workarounds from 2.6.16: * restart transmit moderation timer in case it expires during IRQ routine * default to having 10 HZ watchdog timer. At this point it more important not to hang than to worry about the power cost. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",Jan Engelhardt1-5/+6
so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10[BATTERY] ds2760 W1 slaveAnton Vorontsov5-0/+278
This is W1 slave for ds2760 chip, found inside almost every HP iPaq and HTC PDAs/phones. Signed-off-by: Anton Vorontsov <cbou@mail.ru> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10[BATTERY] One Laptop Per Child power/battery driverDavid Woodhouse3-0/+359
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2007-07-10[BATTERY] Apple PMU driverDavid Woodhouse3-0/+223
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2007-07-10[BATTERY] 1-Wire ds2760 chip battery driverAnton Vorontsov3-0/+479
This is driver for batteries with ds2760 chip inside, found inside almost every HP iPaq and HTC PDAs/phones. Signed-off-by: Anton Vorontsov <cbou@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10[BATTERY] APM emulation driver for class batteriesAnton Vorontsov3-0/+251
Signed-off-by: Eugeny Boger <eugenyboger@dgap.mipt.ru> Signed-off-by: Anton Vorontsov <cbou@mail.ru> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10[BATTERY] pda_power platform driverAnton Vorontsov3-0/+270
Common power driver for PDAs and phones with one or two external power supplies (AC/USB) connected to main and backup batteries, and optional builtin charger. It's used to stop logic duplication through different embedded devices. So, power supply *logic* is here. pda_power register power supplies, and will take care about notifying batteries about power changes through external power interface. Currently, power consumption legal limits (including USB power consumption) should be handled by platform code, inside set_charge function. Signed-off-by: Anton Vorontsov <cbou@mail.ru> Signed-off-by: Roman Moravcik <roman.moravcik@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-07-10[BATTERY] Universal power supply class (was: battery class)Anton Vorontsov8-0/+720
This class is result of "external power" and "battery" classes merge, as suggested by David Woodhouse. He also implemented uevent support. Here how userspace seeing it now: # ls /sys/class/power\ supply/ ac main-battery usb # cat /sys/class/power\ supply/ac/type AC # cat /sys/class/power\ supply/usb/type USB # cat /sys/class/power\ supply/main-battery/type Battery # cat /sys/class/power\ supply/ac/online 1 # cat /sys/class/power\ supply/usb/online 0 # cat /sys/class/power\ supply/main-battery/status Charging # cat /sys/class/leds/h5400\:red-left/trigger none h5400-radio timer hwtimer ac-online usb-online main-battery-charging-or-full [main-battery-charging] main-battery-full Signed-off-by: Anton Vorontsov <cbou@mail.ru> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-07-10[S390] vmlogrdr function annotation.Christian Borntraeger1-2/+2
Use __init and __exit for vmlogrdr. Both functions are only referenced by the module_init exit macros, so this change should be fine. Acked-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] zcrypt: fix request timeout handlingRalph Wuerthner6-90/+140
Under very high load zcrypt requests may timeout while waiting on the request queue. Modify zcrypt that timeouts are based on crypto adapter responses. A timeout occurs only if a crypto adapter does not respond within a given time frame to sumitted requests. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] dasd: Avoid compile warnings on !CONFIG_DASD_PROFILEHeiko Carstens1-0/+4
drivers/s390/block/dasd_proc.c:33: warning: 'dasd_get_user_string' defined but not used drivers/s390/block/dasd_proc.c:172: warning: 'dasd_statistics_array' defined but not used Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] Program check in diag 210 under 31 bitMichael Holzheu1-15/+7
If a virtual address is passed to the diag210 function under 31 bit, we get a programming exception, since diag 210 only works with physical addresses. To fix this, the content of the diag210 data structure is copied to a local structure and the physical address of that structure is passed to diagnose 210. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] zcore: Fix __user annotation.Heiko Carstens1-1/+1
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] sclp: Test facility list before executing a service call.Heiko Carstens3-0/+18
Check if a command is available before executing. Saves some superfluous service calls that won't succeed anyway. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] sclp: introduce some new interfaces.Heiko Carstens2-29/+86
Introduce some new interfaces so that random subsystems don't have to mess around with sclp internal structures. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] vmcp cleanupRobert P. J. Day1-7/+6
No need to use the "&" prefix and, since you're calling nonseekable_open(), there is no need to use no_llseek(). Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10pipe: change the ->pin() operation to ->confirm()Jens Axboe1-1/+1
The name 'pin' was badly chosen, it doesn't pin a pipe buffer in the most commonly used sense in the kernel. So change the name to 'confirm', after debating this issue with Hugh Dickins a bit. A good return from ->confirm() means that the buffer is really there, and that the contents are good. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10splice: divorce the splice structure/function definitions from the pipe headerJens Axboe2-2/+2
We need to move even more stuff into the header so that folks can use the splice_to_pipe() implementation instead of open-coding a lot of pipe knowledge (see relay implementation), so move to our own header file finally. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10loop: convert to using splice_direct_to_actor() instead of sendfile()Jens Axboe1-20/+44
This gets rid of the dependency on ->sendfile() for receiving data and converts loop to ->splice_read() instead. Also includes an IV offset fix from Hugh Dickins. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10Remove legacy CDROM driversJens Axboe23-24847/+0
They are all broken beyond repair. Given that nobody has complained about them (most haven't worked in 2.6 AT ALL), remove them from the tree. A new mitsumi driver that actually works is in progress, it'll get added when completed. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10[PATCH] fix request->cmd == INT casesBoaz Harrosh11-20/+14
- I have unearthed very old bugs in stale drivers that still used request->cmd as a READ|WRITE int - This patch is maybe a proof that these drivers have not been used for a long time. Should they be removed completely? Drivers that currently do not work for sure: drivers/acorn/block/fd1772.c | 2 +- drivers/acorn/block/mfmhd.c | 8 ++++---- drivers/cdrom/aztcd.c | 2 +- drivers/cdrom/cm206.c | 2 +- drivers/cdrom/gscd.c | 2 +- drivers/cdrom/mcdx.c | 2 +- drivers/cdrom/optcd.c | 2 +- drivers/cdrom/sjcd.c | 2 +- Drivers with cosmetic fixes only: b/drivers/block/amiflop.c b/drivers/block/nbd.c b/drivers/ide/legacy/hd.c Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10cciss: add new controller support for P700mMike Miller (OS Dev1-0/+2
This patch adds support for the Smart Array P700m SAS controller. This new controller will ship Fall 2007. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10[PATCH] Remove acsi.cJens Axboe3-1858/+1
Originally from Boaz Harrosh <bharrosh@panasas.com> It hasn't been working in 2.5 or 2.6 ever, since it's still buffer_head based. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10[PATCH] cdrom_sysctl_info fixDave Young1-91/+125
Fix the cdrom_sysctl_info possible buffer overwrite bug. Also fix the locking of accessing topCdromPtr pointer. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10Input: tsdev - fix broken usec-to-millisecs conversionAndrew Morton1-1/+1
Noted by Fengwei Yin <yfw.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: pxa27x_keyboard - fix compile errorMike Rapoport1-1/+1
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: serio_raw - shut up errorneous warningAndrew Morton1-1/+1
drivers/input/serio/serio_raw.c: In function 'serio_raw_read': drivers/input/serio/serio_raw.c:163: warning: 'c' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: atkbd - change mapping for e032 from KEY_WWW to KEY_HOMEPAGEHans de Goede2-4/+4
WWW/Homepage key on Microsoft-compatible keyboards generates KEY_WWW when connected via PS/2 port but KEY_HOMEPAGE when connected via USB. This patch changes mapping in atkbd to match one in HID driver. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: usbtouchscreen - add support for IRTOUCHSYSTEMS touchscreensOndrej Zary2-0/+39
This patch adds support for IRTOUCHSYSTEMS (or UNITOP) infrared touchscreens. The touchscreen sends data in 8-byte packets. BYTE 0 - unknown meaning, seen only one value: 0x54 BYTE 1 - unknown meaning, 3 lowest bits indicate touch state values seen: 0x81, 0x82 or 0x83 bit 0 = set if the screen is touched and was not touched before (touch bit 1 = set if the screen is touched and was touched (dragging) bit 2 = set if the touch was ended (release) BYTES 2 and 3 - X position, high-order-byte first, range = 0 to 0x0FFF BYTES 4 and 5 - Y position, high-order-byte first, range = 0 to 0x0FFF BYTE 6 - unknown meaning, seen only one value: 0xFF BYTE 7 - unknown meaning, seen only one value: 0x00 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - fix report for dpad and inverted Y and RY axes on xbox 360Dmitry Torokhov1-20/+20
Make the driver report Y/RY up as positive value and down as negative. Also make DPAD mapping the same as classic xpad. Reported-by: Brian Magnuson <bdmagnuson@gmail.com> Tested-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - make xpad_play_effect() staticAdrian Bunk1-1/+2
xpad_play_effect() does not need to be global. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - fix check for succesful usb_buffer_allocJan Kratochvil1-1/+1
Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: grip-mp - use ARRAY_SIZEAndi Drebes1-2/+2
Signed-off-by: Andi Drebes <lists-receive@programmierforen.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wacom - add support for the new Bamboo tabletsPing Cheng4-9/+53
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: add gpio-mouse driverHans-Christian Egtvedt3-0/+213
Adds support for simulating a mouse using GPIO lines. The driver needs an appropriate platform device to be created by architecture code. The driver has been tested on AT32AP7000 microprocessor using the ATSTK1000 development board. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: convert from class devices to standard devicesDmitry Torokhov5-299/+335
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wistron - add support for querying/changing keymapDmitry Torokhov1-34/+87
Implement getkeycode and setkeycode methods for the device so EVIOCGKEYCODE and EVIOCSKEYCODE ioctls will work. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wistron - convert to use input-polldevDmitry Torokhov2-99/+102
Switch to using input-polldev skeleton instead of implementing polling loop by itself. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wistron - add LED supportEric Piel2-2/+91
Add support to wistron_btns for leds that come with the multimedia keys. Mail and wifi leds are supported, on laptops which have them. Depending on the laptop, wifi subsystem may control just the led, or both the led and the wifi card. Wifi led interface is activated only for the former type of laptops, as the latter type is already managed. Leds are controled by the interface in /sys/class/leds. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wriston - reduce polling frequencyEric Piel1-4/+14
Reduces the polling frequency from 10 Hz to 2 Hz, which should be less a burden for laptops wrt energy saving. As it is multimedia keys, 500ms (maximum) of latency should be still fine for the user. In order to keep fluent the feeling when the user is pressing several keys in a raw (such as changing the volume), the frequency is increased for a short duration after a key is pressed. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - update driver versionRene van Paassen1-2/+2
Update credits and version number to 2.3 Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - rework the function key codeRene van Paassen1-51/+46
Function keys (also called macro keys) code corrected. Using a lastMacro variable to keep track of key currently pressed. This ensures proper resetting when dragging the pen in the drawing area or to another key. Also suppress sending pressure reports when over the macro key area. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - tolerate newlines in sysfs filesRene van Paassen1-1/+4
Now echo "some value" > /sys/......./somefile is also acceptable. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.