aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-05-27rapidio: add Port-Write handling for EMAlexandre Bounine5-36/+665
Add RapidIO Port-Write message handling in the context of Error Management Extensions Specification Rev.1.3. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27rapidio: add switch locking during discoveryAlexandre Bounine1-20/+144
Add switch access locking during RapidIO discovery. Access lock is required when reading switch routing table contents due to indexed mechanism of RT addressing. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27rapidio: add IDT CPS/TSI switchesAlexandre Bounine10-9/+473
Extentions to RapidIO switch support: 1. modify switch route operation declarations to allow using single switch-specific file for family of switches that share the same route table operations. 2. add standard route table operations for switches that that support route table manipulation registers as defined in the Rev.1.3 of RapidIO specification. 3. add clear-route-table operation for switches 4. add CPSxx and TSIxxx families of RapidIO switches Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27drivers/char/applicom.c: use memdup_userJulia Lawall1-8/+3
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27drivers/char/ppdev.c: use kasprintfJulia Lawall1-3/+1
kasprintf combines kmalloc and sprintf, and takes care of the size calculation itself. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,flag; expression list args; statement S; @@ a = - \(kmalloc\|kzalloc\)(...,flag) + kasprintf(flag,args) <... when != a if (a == NULL || ...) S ...> - sprintf(a,args); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27char drivers: RAM oops/panic loggerMarco Stornelli3-0/+170
Ramoops, like mtdoops, can log oops/panic information but in RAM. It can be used with persistent RAM for systems without flash support. In addition, for this systems, with this driver, it's no more needed add to the kernel the mtd subsystem with advantage in footprint. It can be used in a very easy way with persistent RAM for systems without flash support. For these systems, with this driver, it is no longer required to cinlude mtd subsystem with an advantage in footprint. In addition, you can save flash space and store this information only in RAM. Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Cc: Simon Kagstrom <simon.kagstrom@netinsight.net> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc; Anders Grafstrom <anders.grafstrom@netinsight.net> Cc: Yuasa Yoichi <yuasa@linux-mips.org> Cc: Jamie Lokier <jamie@shareable.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: handle run_to_completion properly in deliver_recv_msg()Jiri Kosina1-3/+8
If run_to_completion flag is set, it means that we are running in a single-threaded mode, and thus no locks are held. This fixes a deadlock when IPMI notifier is being called during panic. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Corey Minyard <minyard@acm.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: update driver to use dev_printk and its constructsMyron Stowe2-127/+107
Update core IPMI driver printk()'s with dev_printk(), and its constructs, to provide additional device topology information. An example of the additional device topology for a PNP device - ipmi_si 00:02: probing via ACPI ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 ipmi_si 00:02: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, ... ipmi_si 00:02: IPMI kcs interface initialized and for a PCI device - ipmi_si 0000:01:04.6: probing via PCI ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ipmi_si 0000:01:04.6: [mem 0xf1ef0000-0xf1ef00ff] regsize 1 spaci... ipmi_si 0000:01:04.6: IPMI kcs interface initialized [minyard@acm.org: rework to fix rejects, extended it a bit] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Zhao Yakui <yakui.zhao@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: convert tracking of the ACPI device pointer to a PNP deviceMyron Stowe1-1/+1
Convert PNP patch (git 9e368fa011d4e0aa050db348d69514900520e40b) to maintain a pointer to a PNP device, 'pnp_dev', instead of the ACPI device, 'acpi_dev', that is currently being tracked with PNP based IPMI device discovery. Signed-off-by: Myron Stowe <myron.stowe@hp.com> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Corey Minyard <minyard@acm.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: change timeout and event poll to one secondCorey Minyard1-2/+2
The timeouts in IPMI are in the 1-5 second range in message handling, so a 1 second timeout is a reasonable thing to do. This should help with reducing power consumption on idle systems. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: attempt to register multiple SIs of the same typeMatthew Garrett1-7/+21
Some odd systems may have multiple BMCs, and we want to be able to support them. Let's make the assumption that if a system legitimately has multiple BMCs then each BMC's SI will be of the same type, and also that we won't see multiple SIs of the same type unless we have multiple BMCs. If these hold true then we should register all SIs of the same type. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: reduce pollingMatthew Garrett1-7/+13
We can reasonably alter the poll rate depending on whether we're performing a transaction or merely waiting for an event. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: reduce polling when interrupts are availableMatthew Garrett1-2/+10
If we're not currently in the middle of a transaction, and if we have interrupts, there's no real reason to poll the controller more frequently than the core IPMI code does. Set the interrupt_disabled flag appropriately as the interrupt state changes, and make the timeout code reset itself only if the transaction is incomplete or we have no interrupts. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: change device discovery orderMatthew Garrett1-11/+12
The ipmi spec provides an ordering for si discovery. Change the driver to match, with the exception of preferring smbios to SPMI as HPs (at least) contain accurate information in the former but not the latter. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: only register one si per bmcMatthew Garrett1-2/+27
Only register one si per bmc. Use any user-provided devices first, followed by the first device with an irq, followed by the first device discovered. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: split device discovery and registrationMatthew Garrett1-46/+84
The ipmi spec indicates that we should only make use of one si per bmc, so separate device discovery and registration to make that possible. [thenzl@redhat.com: fix mutex use] Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ipmi: change addr_source to an enum rather than stringsMatthew Garrett1-19/+25
Switch from a char* to an enum to identify the address source of SIs, making it easier to handle them appropriately during registration. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27md: convert cpu notifier to return encapsulate errno valueAkinobu Mita1-1/+1
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for raid5. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27ehca: convert cpu notifier to return encapsulate errno valueAkinobu Mita1-1/+1
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for ehca. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27topology: convert cpu notifier to return encapsulate errno valueAkinobu Mita1-1/+1
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for topology. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27drivers/telephony/ixj.c: use memdup_userJulia Lawall1-11/+4
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27fbdev: bf54x-lq043fb: fix unused warnings with backlight codeMike Frysinger1-3/+4
The current backlight code is stubbed out, so the new props changes added some warnings: drivers/video/bf54x-lq043fb.c: In function 'bfin_bf54x_probe': drivers/video/bf54x-lq043fb.c:666: warning: label 'out9' defined but not used drivers/video/bf54x-lq043fb.c:504: warning: unused variable 'props' Fix em ! Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27fbdev: bfin-t350mcqb-fb: avoid unused warnings in backlight codeMike Frysinger1-3/+4
The current backlight code is stubbed out, so the new props changes added some warnings about unused label/prop. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27drivers/video/via: use memdup_userJulia Lawall1-8/+3
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Scott Fang <ScottFang@viatech.com.cn> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27add support for S3 Trio3D/1X/2XOndrej Zary1-20/+81
Add support for S3 Trio3D/1X (86C360) and S3 Trio3D/2X (86C362 and 86C368) cards to s3fb driver. Tested with 86C362 AGP and 86C368 PCI&AGP. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27drivers/gpio/it8761e_gpio: check return value of gpiochip_remove()Daniel Mack1-1/+4
This eliminates the following build warning: drivers/gpio/it8761e_gpio.c: In function `it8761e_gpio_exit': drivers/gpio/it8761e_gpio.c:220: warning: ignoring return value of `gpiochip_remove', declared with attribute warn_unused_result Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Denis Turischev <denis@compulab.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27gpio: add Penwell gpio supportAlek Du2-34/+53
Intel Penwell chip has two 96 pins GPIO blocks, which are very similiar as Intel Langwell chip GPIO block, except for pin number difference. This patch expends the original Langwell GPIO driver to support Penwell's. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27gpiolib: introduce set_debounce methodFelipe Balbi1-0/+43
A few architectures, like OMAP, allow you to set a debouncing time for the gpio before generating the IRQ. Teach gpiolib about that. Mark said: : This would be generally useful for embedded systems, especially where : the interrupt concerned is a wake source. It allows drivers to avoid : spurious interrupts from noisy sources so if the hardware supports it : the driver can avoid having to explicitly wait for the signal to become : stable and software has to cope with fewer events. We've lived without : it for quite some time, though. David said: : I looked at adding debounce support to the generic GPIO calls (and thus : gpiolib) some time back, but decided against it. I forget why at this : time (check list archives) but it wasn't because of lack of utility in : certain contexts. : : One thing to watch out for is just how variable the hardware capabilities : are. Atmel GPIOs have something like a fixed number of 32K clock cycles : for debounce, twl4030 had something odd, OMAPs were more like the Atmel : chips but with a different clock. In some cases debouncing had to be : ganged, not per-GPIO. And so forth. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brownell <david-b@pacbell.net> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27gpiolib: make gpiochip_add() show a better error messageBen Dooks1-1/+1
The current message, 'not registered' is confusing as it implies it was not registered with something, whereas printing 'failed to register' implies it was the gpiochip_add() call that did not work correctly. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27gpio: max732x: fix input configuration for open-drain pinsMarc Zyngier1-0/+7
Fix a bug I noticed while hacking on the max732x driver for interrupt support. According to the datasheets, open-drain pins have to be configured as output-high (which in that case is actually high impedance) to be used as input. Signed-off-by: Marc Zyngier <maz@misterjones.org> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27max732x: correct nr_port checking off by one errorAxel Lin1-3/+3
Setup both client_group_a and client_group_b if nr_port > 8 (not including nr_port==8). Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Eric Miao <eric.miao@marvell.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27pl061: fix offset value range checkingAxel Lin1-1/+1
The valid offset value is 0..PL061_GPIO_NR-1, this patch corrects the offset value range checking. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27gpiolib: a gpio is unsigned, so use %u to print itUwe Kleine-König1-1/+1
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27gpiolib: make names array and its values constUwe Kleine-König3-3/+3
gpiolib doesn't need to modify the names and I assume most initializers use string constants that shouldn't be modified anyhow. [akpm@linux-foundation.org: fix drivers/gpio/cs5535-gpio.c] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Kevin Wells <kevin.wells@nxp.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27gpio: add interrupt handling capability to max732xMarc Zyngier2-19/+343
Most of the GPIO expanders supported by the max732x driver have interrupt generation capability by reporting changes on input pins through an INT# pin. This patch implements the irq_chip functionnality (edge detection only). Signed-off-by: Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jebediah Huang <jebediah.huang@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27rtc: AB8500 RTC driverVirupax Sadashivpetimath3-0/+371
Add a driver for the RTC on the AB8500 power management chip. This is a client of the AB8500 MFD driver. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27drivers/message/i2o/i2o_config.c: use memdup_userJulia Lawall1-8/+3
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27drivers/char/vt.c: use memdup_userJulia Lawall1-7/+3
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27drivers/mmc/host: use ERR_CASTJulia Lawall1-1/+1
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more clear what is the purpose of the operation, which otherwise looks like a no-op. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T x; identifier f; @@ T f (...) { <+... - ERR_PTR(PTR_ERR(x)) + x ...+> } @@ expression x; @@ - ERR_PTR(PTR_ERR(x)) + ERR_CAST(x) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27sdhci-spear: ST SPEAr based SDHCI controller glueViresh KUMAR3-0/+311
Add a glue layer to support the sdhci driver on the ST SPEAr platform. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: <shiraz.hashim@st.com> Cc: Linus Walleij <linus.ml.walleij@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27sdio: add new function for RAW (Read after Write) operationGrazvydas Ignotas1-0/+30
SDIO specification allows RAW (Read after Write) operation using IO_RW_DIRECT command (CMD52) by setting the RAW bit. This operation is similar to ordinary read/write commands, except that both write and read are performed using single command/response pair. The Linux SDIO layer already supports this internaly, only external function is missing for drivers to make use, which is added by this patch. This type of command is required to implement proper power save mode support in wl1251 wifi driver. Android has similar patch for G1 in it's tree for the same reason: http://android.git.kernel.org/?p=kernel/common.git;a=commitdiff;h=74a47786f6ecbe6c1cf9fb15efe6a968451deb52 Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kalle.valo@iki.fi> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: remove the "state" argument to mmc_suspend_host()Matt Fleming22-25/+22
Even though many mmc host drivers pass a pm_message_t argument to mmc_suspend_host() that argument isn't used the by MMC core. As host drivers are converted to dev_pm_ops they'll have to construct pm_message_t's (as they won't be passed by the PM subsystem any more) just to appease the mmc suspend interface. We might as well just delete the unused paramter. Signed-off-by: Matt Fleming <matt@console-pimps.org> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl>ZZ Acked-by: Sascha Sommer <saschasommer@freenet.de> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: OMAP HS-MMC: convert to dev_pm_opsKevin Hilman1-4/+11
Convert PM operations to use dev_pm_ops. This will facilitate the runtime PM coversion which will add to dev_pm_ops hooks. Note that dev_pm_ops version of the suspend hook no longer takes a 'state' argument. However, the MMC core function mmc_suspend_host() still takes a 'state' argument, but it is unused, so a dummy state variable was created to pass to the MMC core. In the future, the MMC core should be converted to drop this state argument and the rest of the MMC drivers could be easily converted to dev_pm_ops as well. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Matt Fleming <matt@console-pimps.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27omap_hsmmc: improve interrupt synchronisationAdrian Hunter1-128/+134
The following changes were needed: - do not use in_interrupt() because it will not work with threaded interrupts In addition, the following improvements were made: - ensure DMA is unmapped only after the final DMA interrupt - ensure a request is completed only after the final DMA interrupt - disable controller interrupts when a request is not in progress - remove the spin-lock protecting the start of a new request from an unexpected interrupt because the locking was complicated and a 'req_in_progress' flag suffices (since the spin-lock only defers the unexpected interrupts anyway) - instead use the spin-lock to protect the MMC interrupt handler from the DMA interrupt handler - remove the semaphore preventing DMA from being started while the previous DMA is still in progress - the other changes make that impossible, so it is now a BUG_ON condition - ensure the controller interrupt status is clear before exiting the interrrupt handler In general, these changes make the code safer but do not fix any specific bugs so backporting is not necessary. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Tested-by: Venkatraman S <svenkatr@ti.com> Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27sdhci: enable multiblock transfers in sdhci-s3cMaurus Cuelenaere1-3/+0
Wifi over SDIO doesn't work correctly without multiblock, so enable this. This patch depends on the following patches: Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: s3c6410: enable ADMA feature in 6410 sdhci controllerThomas Abraham1-6/+1
Enable the ADMA feature in the 6410 SDHCI controller driver. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: s3c6410: add new quirk in sdhci driver and update ADMA descriptor buildThomas Abraham2-5/+17
The s3c6410 sdhci controller does not support the 'End' attribute and NOP attribute in the same 8-Byte ADMA descriptor. This patch adds a new quirk to identify sdhci host contollers with such behaviour. In addition to this, for controllers using the new quirk, the last entry in the ADMA descritor table is marked with the 'End' attribute (instead of using a NOP descriptor with 'End' attribute). Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27sdhci: build fix: rename SDHCI I/O accessor functionsMatt Fleming3-30/+30
Unfortunately some architectures #define their read{b,w,l} and write{b,w,l} I/O accessors which makes the SDHCI I/O accessor functions of the same names subject to preprocessing. This leads to the following compiler error, In file included from drivers/mmc/host/sdhci.c:26: drivers/mmc/host/sdhci.h:318:35: error: macro "writel" passed 3 arguments, but takes just 2 Rename the SDHCI I/O functions so that CONFIG_MMC_SDHCI_IO_ACCESSORS can be enabled for architectures that implement their read{b,w,l} and write{b,w,l} functions with macros. Signed-off-by: Matt Fleming <matt@console-pimps.org> Cc: Zhangfei Gao <zgao6@marvell.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: SDHCI_INT_DATA_MASK typo errorZhangfei Gao1-1/+1
Signed-off-by: Zhangfei Gao <zgao6@marvell.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27mmc: atmel-mci: Add support for SDIO interruptsAnders Grahn1-4/+38
Atmel-mci support for SDIO interrupts. This adds the enable_sdio_irq() function and the configuration of sdio irq mask per slot. With this irq mask information, we keep the idea of multiple slot per sd/mmc host (not only A and B). MMC_CAP_SDIO_IRQ is added according to slot configuration. A new little function is added to run mmc_signal_sdio_irq() during interrupt handling routine. Signed-off-by: Anders Grahn <anders.grahn@hd-wireless.se> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.