aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-03-21i40e: Fix a message stringAnjali Singhai Jain1-1/+1
Change string from "Side Band" to "Sideband" for consistency. Change-ID: I45f05466bb5c63b0f999d743312bcb61b5bd6518 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21i40e/i40evf: Add EEE LPI statsAnjali Singhai Jain4-0/+30
Add 4 new stats to keep track of EEE LPI (Low Power Idle) state. Change-ID: Id6316619bb0559789770288b694a54d17f8fac5c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20net: bcmgenet: manipulate netdev_queue directlyFlorian Fainelli1-4/+8
Instead of always invoking netdev_get_tx_queue() in bcmgenet_xmit() and bcmgenet_tx_reclaim(), just get the corresponding netdev_queue pointer once and for all and manipulate it throughout bcmgenet_xmit() and bcmgenet_tx_reclaim(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20net: bcmgenet: remove bogus tx queue checksFlorian Fainelli1-8/+0
netdev_pick_tx already takes care of making sure that a given skb->queue_mapping value will remain within the number of advertised hardware queue number, there is no need to re-do this again in the driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20net: bcmgenet: add skb_tx_timestamp callFlorian Fainelli1-0/+2
The BCMGENET driver was not TX timestamping the SKBs it queued for transmission, do this in bcmgenet_xmit() right before kicking the Transmit DMA engine. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20net: bcmgenet: remove unused spinlock memberFlorian Fainelli2-2/+0
The spinlock cookie in bcmgenet_priv is never used, get rid of it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20sh_eth: Remove goto statements that jump straight to a returnLaurent Pinchart1-21/+9
"goto" is well accepted for error paths in the kernel but should not be used unnecessarily. Return the correct value directly instead of using a goto when possible. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20sh_eth: Register MDIO bus before registering the network deviceLaurent Pinchart1-11/+9
Network API functions that rely on the MDIO bus can be called as soon as the driver calls register_netdev(). Register the MDIO bus before the network device to avoid race conditions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20sh_eth: Simplify MDIO bus initialization and releaseLaurent Pinchart1-19/+11
The network device passed to the sh_mdio_init and sh_mdio_release functions is only used to access the sh_eth_private instance. Pass it directly to those functions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20sh_eth: Use the platform device as the MDIO bus parentLaurent Pinchart1-1/+1
The MDIO bus parent is set to the network device. Beside not reflecting the hardware topology, this prevents registering the MDIO bus before initializing the network device. Fix it by setting the MDIO bus parent to the platform device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20sh_eth: Use the platform device for memory allocationLaurent Pinchart1-4/+3
Memory allocated for the MDIO bus with the devm_kzalloc() API is associated with the network device. While this will cause memory to be freed at the right time, it doesn't allow allocating memory before the network device is initialized. Replace the network device with the parent platform device for memory allocation to remove that dependency. This also improves consistency with the other devm_* calls in the driver that all use the platform device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20of_mdio: Allow the DT to specify the phy ID and avoid autoprobingJason Gunthorpe1-1/+22
This makes the generic of_mdiobus_register parse the DT compatible string for the pattern ethernet-phy-idAAAA.BBBB. If present it should be a value that matches the phy-id register normally readable through MDIO. When the ID is given the phy autoprobing is defeated and the phy is created directly. This is necessary to support phy's that cannot be autoprobed when of_mdiobus_register is called. Specifically, my case has the phy in reset at of_mdiobus_register, the reset is only released once the ethernet driver starts, before it attaches to the phy. Tested on ARM Kirkwood with phy id 0x01410e90 (Marvell 88E1318) Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20net: cdc_ncm: respect operator preferred MTU reported by MBIMBen Chan1-0/+17
According to "Universal Serial Bus Communications Class Subclass Specification for Mobile Broadband Interface Model, Revision 1.0, Errata-1" published by USB-IF, the wMTU field of the MBIM extended functional descriptor indicates the operator preferred MTU for IP data streams. This patch modifies cdc_ncm_setup to ensure that the MTU value set on the usbnet device does not exceed the operator preferred MTU indicated by wMTU if the MBIM device exposes a MBIM extended functional descriptor. Signed-off-by: Ben Chan <benchan@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20net/mlx4: Adapt num_vfs/probed_vf params for single port VFMatan Barak1-13/+34
A new syntax is added for the module parameters num_vfs and probe_vf. num_vfs=p1,p2,p1+p2 probe_bf=p1,p2,p1+p2 Where p1(2) is the number of VFs on / probed VFs for physical port1(2) and p1+p2 is the number of dual port VFs. Single port VFs are currently supported only when the link type for both ports of the device is Ethernet. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20net/mlx4: Adapt code for N-Port VFMatan Barak11-79/+416
Adds support for N-Port VFs, this includes: 1. Adding support in the wrapped FW command In wrapped commands, we need to verify and convert the slave's port into the real physical port. Furthermore, when sending the response back to the slave, a reverse conversion should be made. 2. Adjusting sqpn for QP1 para-virtualization The slave assumes that sqpn is used for QP1 communication. If the slave is assigned to a port != (first port), we need to adjust the sqpn that will direct its QP1 packets into the correct endpoint. 3. Adjusting gid[5] to modify the port for raw ethernet In B0 steering, gid[5] contains the port. It needs to be adjusted into the physical port. 4. Adjusting number of ports in the query / ports caps in the FW commands When a slave queries the hardware, it needs to view only the physical ports it's assigned to. 5. Adjusting the sched_qp according to the port number The QP port is encoded in the sched_qp, thus in modify_qp we need to encode the correct port in sched_qp. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20net/mlx4: Add utils for N-Port VFsMatan Barak2-0/+108
This patch adds the following utils: 1. Convert slave_id -> VF 2. Get the active ports by slave_id 3. Convert slave's port to real port 4. Get the slave's port from real port 5. Get all slaves that uses the i'th real port 6. Get all slaves that uses the i'th real port exclusively Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20net/mlx4: Add data structures to support N-Ports per VFMatan Barak1-24/+85
Adds the required data structures to support VFs with N (1 or 2) ports instead of always using the number of physical ports. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20IB/mlx4_ib: Adapt code to use caps.num_ports instead of a constantMatan Barak1-4/+4
Some code in the mlx4 IB driver stack assumed MLX4_MAX_PORTS ports. Instead, we should only loop until the number of actual ports in i the device, which is stored in dev->caps.num_ports. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20smsc911x: Change clock warning message to debug levelFabio Estevam1-1/+1
Since passing the clock is not mandatory, change the warning message to debug, so that we avoid getting the following clock failure message on every boot: smsc911x: Driver version 2008-10-21 smsc911x smsc911x (unregistered net_device): couldn't get clock -2 libphy: smsc911x-mdio: probed Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20ixgbe: enable tx queues after link upEmil Tantilov1-15/+17
This patch moves the call to enable Tx queues after the link is established. Previously there was a chance for aggressive start_ndo_xmit() callers to sneak packets between enabling the Tx queues and the link coming up. In addition it replaces netif_tx_start_all_queues() with netif_tx_wake_all_queues() to allow for flushing of the qdisc. CC: Arun Sharma <asharma@fb.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: Stop cacheing if the MNG FW enabledDon Skidmore6-13/+5
We use to cache whether the MNG FW was enabled, how since this isn't static we really need to verify with each check. This patch makes that change. CC: Arun Sharma <asharma@fb.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: clean up ixgbe_atr_compute_perfect_hash_82599Jacob Keller1-37/+9
Rather than assign several parameters in a row, we should use a for loop, which reduces code size. CC: Arun Sharma <asharma@fb.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: use ixgbe_read_pci_cfg_wordJacob Keller1-8/+3
This patch replaces some direct uses of pci_read_config_word with the protected ixgbe_read_pci_cfg_word function, which checks for whether the adapter is removed when LER is enabled. We shouldn't use the pci_read_config_word calls directly because of these checks. This patch also cleans up an unnecessary save of a pointer to the mac object, as our standard style is to just use the hw pointer. CC: Arun Sharma <asharma@fb.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: remove unused media typeJacob Keller4-81/+0
This patch reverts the addition of the fiber_fixed type, which ended up never being used. We don't have plans to support this type going forward, and there is no reason to keep an unused type around polluting the code. Reverts: 4e8e1bca6e2 ("ixgbe: add new media type") CC: Arun Sharma <asharma@fb.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: fix ixgbe_setup_mac_link_82599 autoc variablesJacob Keller1-10/+12
This patch fixes flow control autonegotiation for KR/KX/K4 interfaces. When setting up MAC link, the cached autoc value and current autoc value were being incorrectly used to determine whether link reset is required. This resulted in the driver ignoring and discarding flow control negotiation changes that occur since the caching happened, as well as when the mac was being setup. This patch also splits the assignments for the 3 autoc variables into their own block, and adds a comment explaining what each one means, in order to help keep logic more straightforward while reading the code. CC: Arun Sharma <asharma@fb.com> Reported-by: Sourav Chatterjee <sourav.chatterjee@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbe: fix ixgbe_stop_mac_link_on_d3_82599 to check mng correctlyJacob Keller1-2/+6
Previously, we did a full check to see if MNG FW was running. Instead, we should only check to see whether it could be enabled. Since it may become active while down, we don't want to bring the link down. CC: Arun Sharma <asharma@fb.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbe: check Core Clock Disable bitJacob Keller2-1/+8
This patch corrects the stop_mac_link_on_d3 function in ixgbe_82599 by checking the Core Clock Disable bit before stopping link. CC: Arun Sharma <asharma@fb.com> Reported-by: Chris Pavlas <chris.pavlas@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbe: fix errors related to protected AUTOC callsDon Skidmore2-9/+11
Found several incorrect conditionals after calling the prot_autoc_* functions. Likewise we weren't always freeing the FWSW semaphore after grabbing it. This would lead to DA cables being unable to link along with possible other errors. CC: Arun Sharma <asharma@fb.com> CC: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbevf: Convert uses of __constant_<foo> to <foo>Joe Perches1-2/+2
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbe: Convert uses of __constant_<foo> to <foo>Joe Perches2-19/+19
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19igbvf: Convert uses of __constant_<foo> to <foo>Joe Perches1-2/+2
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19igb: Convert uses of __constant_<foo> to <foo>Joe Perches1-6/+6
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19e100: Convert uses of __constant_<foo> to <foo>Joe Perches1-2/+2
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19igb: enable VLAN stripping for VMs with i350Stefan Assmann3-0/+12
For i350 VLAN stripping for VMs is not enabled in the VMOLR register but in the DVMOLR register. Making the changes accordingly. It's not necessary to unset the E1000_VMOLR_STRVLAN bit on i350 as the hardware will simply ignore it. Without this change if a VLAN is configured for a VF assigned to a guest via (i.e.) ip link set p1p1 vf 0 vlan 10 the VLAN tag will not be stripped from packets going into the VM. Which they should be because the VM itself is not aware of the VLAN at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20qeth: Fix IP version detection for VLAN trafficStefan Raspl1-2/+5
The current code would always return 0 for VLAN-encapsulated IP traffic. One notable side effect was that VLAN traffic would never get prioritized on OSD and OSX devices when priority queueing modes prio_queueing_tos or prio_queueing_prec were enabled. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20qeth: Removed unused parameterStefan Raspl1-3/+3
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20qeth: make qeth_query_card_info_cb() staticHeiko Carstens1-2/+2
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-19Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller16-71/+408
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e, i40evf, e1000e, ixgbe and ixgbevf. Mitch adds support for the VF link state ndo which allows the PF driver to control the virtual link state of the VF devices. Added support for viewing and modifying RSS hash options and RSS hash look-up table programming through ethtool for i40evf. Fixed complaint about the use of min() where min_t() should be used in i40evf. Anjali adds support for ethtool -k option for NTUPLE control for i40e. Elizabeth cleans up and refactors i40e_open() to separate out the VSI code into its own i40e_vsi_open(). Jesse enables the hardware feature head write back to avoid updating the descriptor ring by marking each descriptor with a DD bit and instead writes a memory location with an update to where the driver should clean up to in i40e and i40evf. Reduces context descriptors for i40e/i40evf since we do not need context descriptors for every packet, only for TSO or timesync. Dan Carpenter fixes a potential array underflow in i40e_vc_process_vf_msg(). Dave fixes an e1000e hardware unit hang where the check for pending Tx work when link is lost was mistakenly moved to be done only when link is first detected to be lost. Fixed a problem with poor network performance on certain silicon in e1000e when configured for 100M HDX performance. Carolyn adds register defines needed for time sync functions and the code to call the updated defines. Jacob adds the ixgbe function for writing PCI config word and checks whether the adapter has been removed first. Mark adds the bit __IXGBEVF_REMOVING to indicate that the module is being removed because the __IXGBEVF_DOWN bit had been overloaded for this purpose, but leads to trouble. ixgbevf_down function can now prevent multiple executions by doing test_and_set_bit on __IXGBEVF_DOWN. v2: - dropped patch Mitch's patch "i40evf: Support RSS option in ethtool" based on feedback from Ben Hutchings so that Mitch can re-work the patch solution v3: - removed unnecessary parenthesis in patch 1 based on feedback from David Miller - changed a macro to get the next queue to a function in patch 2 based on feedback from David Miller - added blank lines after variable declaration and code in two functions in patch 6 based on feedback from David Miller ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-19ixgbevf: Protect ixgbevf_down with __IXGBEVF_DOWN bitMark Rustad1-1/+3
The ixgbevf_down function can now prevent multiple executions by doing test_and_set_bit on __IXGBEVF_DOWN. This did not work before introduction of the __IXGBEVF_REMOVING bit, because of overloading of __IXGBEVF_DOWN. Also add smp_mb__before_clear_bit call before clearing the __IXGBEVF_DOWN bit. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbevf: Indicate removal state explicitlyMark Rustad2-7/+12
Add a bit, __IXGBEVF_REMOVING, to indicate that the module is being removed. The __IXGBEVF_DOWN bit had been overloaded for this purpose, but that leads to trouble. A few places now check both __IXGBEVF_DOWN and __IXGBEVF_REMOVING. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19ixgbe: add ixgbe_write_pci_cfg_word with ixgbe_removed checkJacob Keller3-5/+11
Inline with the current use for ixgbe_read_pci_cfg_word, create a similar function for writing PCI config, which checks whether the adapter has been removed first, if Live Error Recovery has been enabled. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19igb: Add register defines needed for time sync functionsCarolyn Wyborny3-5/+78
This patch adds defines needed for implementing the auxiliary time sync functions and also changes code to call the updated defines instead of the old. Reported-by: Richard Cochran <ricahrdcochran@gmail.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19e1000e: Fix Explicitly set Transmit Control RegisterDavid Ertman1-1/+9
This patch causes the TCTL to be explicitly set to fix a problem with poor network performance (throughput) on certain silicon when configured for 100M HDX performance. Cc: Todd Fujinaka <todd.fujinaka@intel.com> Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Acked-by: Bruce W. Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19e1000e: Fix Hardware Unit HangDavid Ertman1-9/+23
The check for pending Tx work when link is lost was mistakenly moved to be done only when link is first detected to be lost. It turns out there is a small window of opportunity for additional Tx work to get queued up shortly after link is dropped. Move the check back to the place it was before in the watchdog task. Put in additional debug information for other reset paths and a final catch-all for false hangs in the scheduled function that prints out the hardware hang message. Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e/i40evf: Bump build versionsCatherine Sullivan2-2/+2
Bump to version 0.3.36 for i40e and 0.9.16 for i40evf. Change-ID: I7b4ff97b32d2825181803c03c316381a7608a618 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e: potential array underflow in i40e_vc_process_vf_msg()Dan Carpenter1-1/+1
If "vf_id" is smaller than hw->func_caps.vf_base_id then it leads to an array underflow of the pf->vf[] array. This is unlikely to happen unless the hardware is bad, but it's a small change and it silences a static checker warning. Fixes: 7efa84b7abc1 ('i40e: support VFs on PFs other than 0') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e/i40evf: reduce context descriptorsJesse Brandeburg2-2/+4
We don't need context descriptors for every packet, only tso or timesync. This fixes a bug in the driver where it would always add a context even if all the passed in values to the context descriptor function were 0/default values. Change-ID: I0101d2b893380707b5c2de61aab3e16d4310e9a1 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e/i40evf: enable hardware feature head write backJesse Brandeburg4-12/+88
The hardware supports a feature to avoid updating the descriptor ring by marking each descriptor with a DD bit, and instead writes a memory location with an update to where the driver should clean up to. Enable this feature. Change-ID: I5da4e0681f0b581a6401c950a81808792267fe57 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e: Refactor and cleanup i40e_open(), adding i40e_vsi_open()Elizabeth Kappler2-9/+34
This patch cleans up and moves a portion of i40e_open to i40e_vsi_open, in order to have a shorter vsi_open function that does only that. Change-ID: I1c418dda94dcfc0eb7d4386a70c330692ef5ecc9 Signed-off-by: Elizabeth Kappler <elizabeth.m.kappler@intel.com> Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-19i40e: Patch to enable Ethtool/netdev feature flag for NTUPLE controlAnjali Singhai Jain2-0/+42
This enables option '-k/-K' in ethtool for NTUPLE control. NTUPLE control requires a reset, to take effect. When the feature is turned off, the SW list of stored FD SB filters gets cleaned up. Change-ID: I9d564b67a10d4afa11de3b320d601c3d2e6edc1f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.