aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-22r8169: remove fiddling with the PCIe max read request sizeHeiner Kallweit1-36/+4
The attempt to improve performance by changing the PCIe max read request size was added in the vendor driver more than 10 years back and copied to r8169 driver. In the vendor driver this has been removed long ago. Obviously it had no effect, also in my tests I didn't see any difference. Typically the max payload size is less than 512 bytes anyway, and the PCI core takes care that the maximum supported value is set. So let's remove fiddling with PCIe max read request size from r8169 too. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22mlxsw: core: Extend QSFP EEPROM size for ethtoolVadim Pasternak1-6/+17
Extend the size of QSFP EEPROM for the cable types SSF8436 and SFF8636 from 256 to 640 bytes in order to expose all the EEPROM pages by ethtool. For SFF-8636 and SFF-8436 specifications, the driver exposes 256 bytes of data for ethtool's get_module_eeprom() callback. This is because the driver uses the below defines to specify SFF module length in ethtool's get_module_info() callback: 'ETH_MODULE_SFF_8636_LEN' and 'ETH_MODULE_SFF_8436_LEN' (both are 256). As a result of exposing 256 bytes only, ethtool shows wrong "zero" info for pages 1, 2, 3. The patch changes the length returned by callback for get_module_info() to the values from the next defines: 'ETH_MODULE_SFF_8636_MAX_LEN' and 'ETH_MODULE_SFF_8436_MAX_LEN' (both are 640) to allow exposing of upper page 1, 2 and 3. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22mlxsw: reg: Add macro for getting QSFP module EEPROM page numberVadim Pasternak1-0/+9
Provide a macro for getting QSFP module EEPROM page number from the optional upper page number row offset, specified in request. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22xen/netback: cleanup init and deinit codeJuergen Gross1-60/+54
Do some cleanup of the netback init and deinit code: - add an omnipotent queue deinit function usable from xenvif_disconnect_data() and the error path of xenvif_connect_data() - only install the irq handlers after initializing all relevant items (especially the kthreads related to the queue) - there is no need to use get_task_struct() after creating a kthread and using put_task_struct() again after having stopped it. - use kthread_run() instead of kthread_create() to spare the call of wake_up_process(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <pdurrant@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22r8152: support firmware of PHY NC for RTL8153AHayes Wang1-2/+282
Support the firmware of PHY NC which is used to fix the issue found for PHY. Currently, only RTL_VER_04, RTL_VER_05, and RTL_VER_06 need it. The order of loading PHY firmware would be RTL_FW_PHY_START RTL_FW_PHY_NC RTL_FW_PHY_STOP The RTL_FW_PHY_START/RTL_FW_PHY_STOP are used to lock/unlock the PHY, and set/clear the patch key from the firmware file. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22r8152: move r8153_patch_request forwardHayes Wang1-27/+27
Move r8153_patch_request() forward for later patch. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22r8152: add checking fw_offset field of struct fw_macHayes Wang1-3/+9
Make sure @fw_offset field of struct fw_mac is more than the size of struct fw_mac. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22r8152: rename fw_type_1 with fw_macHayes Wang1-41/+41
The struct fw_type_1 is used by MAC only, so rename it to a meaningful one. Besides, adjust two messages. Replace "load xxx fail" with "check xxx fail" Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-21Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueJakub Kicinski8-3/+525
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2019-10-21 This series contains updates to e1000e and igc only. Sasha adds stream control transmission protocol (SCTP) CRC checksum support for igc. Also added S0ix support to the e1000e driver. Then added multicast support by adding the address list to the MTA table and providing the option for IPv6 address for igc. In addition, added receive checksum support to igc as well. Lastly, cleaned up some code that was not fully implemented yet for the VLAN filter table array. v2: Dropped patch 1 & 2 from the original series. Patch 1 is being sent to 'net' tree as a fix and patch 2 implementation needs to be re-worked. Updated the patch to add support for S0ix to fix the reverse Xmas tree issues and made the entry/exit functions void since they constantly returned success. All based on community feedback. v3: Cleaned up patch 4 of the series based on feedback from the community. Cleaned up a stray comma in a code comment and removed the 'inline' of a function that would be inlined by the compiler anyways. ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-21net: phy: marvell: remove superseded function marvell_set_downshiftHeiner Kallweit1-53/+35
Instead of superseded function marvell_set_downshift() we can use new function m88e1111_set_downshift() in m88e1116r_config_init(). For this m88e1116r_config_init() has to be moved in the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: phy: marvell: support downshift as PHY tunableHeiner Kallweit1-1/+87
So far downshift is implemented for one small use case only and can't be controlled from userspace. So let's implement this feature properly as a PHY tunable so that it can be controlled via ethtool. More Marvell PHY's may support downshift, but I restricted it for now to the ones where I have the datasheet. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: add XDP_TX supportLorenzo Bianconi1-7/+121
Implement XDP_TX verdict and ndo_xdp_xmit net_device_ops function pointer Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: make tx buffer array agnosticLorenzo Bianconi1-23/+43
Allow tx buffer array to contain both skb and xdp buffers in order to enable xdp frame recycling adding XDP_TX verdict support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: move header prefetch in mvneta_swbm_rx_frameLorenzo Bianconi1-4/+3
Move data buffer prefetch in mvneta_swbm_rx_frame after dma_sync_single_range_for_cpu Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: add basic XDP supportLorenzo Bianconi1-9/+139
Add basic XDP support to mvneta driver for devices that rely on software buffer management. Currently supported verdicts are: - XDP_DROP - XDP_PASS - XDP_REDIRECT - XDP_ABORTED - iptables drop: $iptables -t raw -I PREROUTING -p udp --dport 9 -j DROP $nstat -n && sleep 1 && nstat IpInReceives 151169 0.0 IpExtInOctets 6953544 0.0 IpExtInNoECTPkts 151165 0.0 - XDP_DROP via xdp1 $./samples/bpf/xdp1 3 proto 0: 421419 pkt/s proto 0: 421444 pkt/s proto 0: 421393 pkt/s proto 0: 421440 pkt/s proto 0: 421184 pkt/s Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: rely on build_skb in mvneta_rx_swbm poll routineLorenzo Bianconi1-84/+95
Refactor mvneta_rx_swbm code introducing mvneta_swbm_rx_frame and mvneta_swbm_add_rx_fragment routines. Rely on build_skb in oreder to allocate skb since the previous patch introduced buffer recycling using the page_pool API. This patch fixes even an issue in the original driver where dma buffers are accessed before dma sync. mvneta driver can run on not cache coherent devices so it is necessary to sync DMA buffers before sending them to the device in order to avoid memory corruptions. Running perf analysis we can see a performance cost associated with this DMA-sync (anyway it is already there in the original driver code). In follow up patches we will add more logic to reduce DMA-sync as much as possible. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: introduce page pool API for sw buffer managerLorenzo Bianconi2-19/+65
Use the page_pool api for allocations and DMA handling instead of __dev_alloc_page()/dma_map_page() and free_page()/dma_unmap_page(). Pages are unmapped using page_pool_release_page before packets go into the network stack. The page_pool API offers buffer recycling capabilities for XDP but allocates one page per packet, unless the driver splits and manages the allocated page. This is a preliminary patch to add XDP support to mvneta driver Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: mvneta: introduce mvneta_update_stats routineLorenzo Bianconi1-21/+22
Introduce mvneta_update_stats routine to collect {rx/tx} statistics (packets and bytes). This is a preliminary patch to add XDP support to mvneta driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21igc: Clean up unused shadow_vfta pointerSasha Neftin2-2/+0
VLAN filter table array not implemented yet and shadow_vfta pointer not used. Clean up the code and remove the unused shadow_vfta pointer. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21igc: Add Rx checksum supportSasha Neftin2-1/+47
Extend the socket buffer field process and add Rx checksum functionality Minor: fix indentation with tab instead of spaces. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21igc: Add set_rx_mode supportSasha Neftin5-0/+291
Add multicast addresses list to the MTA table. Implement basic Rx mode support. Add option for IPv6 address settings. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21e1000e: Add support for S0ixSasha Neftin2-0/+186
Implement flow for S0ix support. Modern SoCs support S0ix low power states during idle periods, which are sub-states of ACPI S0 that increase power saving while supporting an instant-on experience for providing lower latency that ACPI S0. The S0ix states shut off parts of the SoC when they are not in use, while still maintaning optimal performance. This patch add support for S0ix started from an Ice Lake platform. Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21igc: Add SCTP CRC checksumming functionalitySasha Neftin1-0/+1
Add stream control transmission protocol CRC checksum. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21net: hns3: log and clear hardware error after reset completeJian Shen1-0/+3
When device is resetting, the CMDQ service may be stopped until reset completed. If a new RAS error occurs at this moment, it will no be able to clear the RAS source. This patch fixes it by clear the RAS source after reset complete. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: do not allocate linear data for fraglist skbYunsheng Lin1-2/+1
Currently, napi_alloc_skb() is used to allocate skb for fraglist when the head skb is not enough to hold the remaining data, and the remaining data is added to the frags part of the fraglist skb, leaving the linear part unused. So this patch passes length of 0 to allocate fraglist skb with zero size of linear data. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: minor cleanup for hns3_handle_rx_bd()Yunsheng Lin1-25/+13
Since commit e55970950556 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll"), ring->skb is used to record the current SKB when processing the RX BD in hns3_handle_rx_bd(), so the parameter out_skb is unnecessary. This patch also adjusts the err checking to reduce duplication in hns3_handle_rx_bd(), and "err == -ENXIO" is rare case, so put it in the unlikely annotation. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: make struct hns3_enet_ring cacheline alignedYunsheng Lin1-1/+1
Since struct hns3_enet_ring is a frequently used in critical data path, so make it cacheline aligned as struct hns3_enet_tqp_vector. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: introduce ring_to_netdev() in enet moduleYunsheng Lin2-7/+9
There are a few places that need to access the netdev of a ring through ring->tqp->handle->kinfo.netdev, and ring->tqp is a struct which both in enet and hclge modules, it is better to use the struct that is only used in enet module. This patch adds the ring_to_netdev() to access the netdev of ring through ring->tqp_vector->napi.dev. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: minor optimization for barrier in IO pathYunsheng Lin1-3/+7
Currently, the TX and RX ring in a queue is bounded to the same IRQ, there may be unnecessary barrier op when only one of the ring need to be processed. This patch adjusts the location of rmb() in hns3_clean_tx_ring() and adds a checking in hns3_clean_rx_ring() to avoid unnecessary barrier op when there is nothing to do for the ring. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: optimized MAC address in management table.Guojia Liao2-4/+3
mac_addr_hi32 and mac_addr_lo16 are used to store the MAC address for management table. But using array of mac_addr[ETH_ALEN] would be more general and not need to care about the big-endian mode of the CPU. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: hns3: remove struct hns3_nic_ring_data in hns3_enet moduleYunsheng Lin4-138/+74
Only the queue_index field in struct hns3_nic_ring_data is used, other field is unused and unnecessary for hns3 driver, so this patch removes it and move the queue_index field to hns3_enet_ring. This patch also removes an unused struct hns_queue declaration. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller327-4399/+3080
Several cases of overlapping changes which were for the most part trivially resolvable. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds84-443/+739
Pull networking fixes from David Miller: "I was battling a cold after some recent trips, so quite a bit piled up meanwhile, sorry about that. Highlights: 1) Fix fd leak in various bpf selftests, from Brian Vazquez. 2) Fix crash in xsk when device doesn't support some methods, from Magnus Karlsson. 3) Fix various leaks and use-after-free in rxrpc, from David Howells. 4) Fix several SKB leaks due to confusion of who owns an SKB and who should release it in the llc code. From Eric Biggers. 5) Kill a bunc of KCSAN warnings in TCP, from Eric Dumazet. 6) Jumbo packets don't work after resume on r8169, as the BIOS resets the chip into non-jumbo mode during suspend. From Heiner Kallweit. 7) Corrupt L2 header during MPLS push, from Davide Caratti. 8) Prevent possible infinite loop in tc_ctl_action, from Eric Dumazet. 9) Get register bits right in bcmgenet driver, based upon chip version. From Florian Fainelli. 10) Fix mutex problems in microchip DSA driver, from Marek Vasut. 11) Cure race between route lookup and invalidation in ipv4, from Wei Wang. 12) Fix performance regression due to false sharing in 'net' structure, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (145 commits) net: reorder 'struct net' fields to avoid false sharing net: dsa: fix switch tree list net: ethernet: dwmac-sun8i: show message only when switching to promisc net: aquantia: add an error handling in aq_nic_set_multicast_list net: netem: correct the parent's backlog when corrupted packet was dropped net: netem: fix error path for corrupted GSO frames macb: propagate errors when getting optional clocks xen/netback: fix error path of xenvif_connect_data() net: hns3: fix mis-counting IRQ vector numbers issue net: usb: lan78xx: Connect PHY before registering MAC vsock/virtio: discard packets if credit is not respected vsock/virtio: send a credit update when buffer size is changed mlxsw: spectrum_trap: Push Ethernet header before reporting trap net: ensure correct skb->tstamp in various fragmenters net: bcmgenet: reset 40nm EPHY on energy detect net: bcmgenet: soft reset 40nm EPHYs before MAC init net: phy: bcm7xxx: define soft_reset for 40nm EPHY net: bcmgenet: don't set phydev->link from MAC net: Update address for MediaTek ethernet driver in MAINTAINERS ipv4: fix race condition between route lookup and invalidation ...
2019-10-19net: ethernet: dwmac-sun8i: show message only when switching to promiscMans Rullgard1-1/+2
Printing the info message every time more than the max number of mac addresses are requested generates unnecessary log spam. Showing it only when the hw is not already in promiscous mode is equally informative without being annoying. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-19net: aquantia: add an error handling in aq_nic_set_multicast_listChenwandun1-0/+2
add an error handling in aq_nic_set_multicast_list, it may not work when hw_multicast_list_set error; and at the same time it will remove gcc Wunused-but-set-variable warning. Signed-off-by: Chenwandun <chenwandun@huawei.com> Reviewed-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-19macb: propagate errors when getting optional clocksMichael Tretter1-6/+6
The tx_clk, rx_clk, and tsu_clk are optional. Currently the macb driver marks clock as not available if it receives an error when trying to get a clock. This is wrong, because a clock controller might return -EPROBE_DEFER if a clock is not available, but will eventually become available. In these cases, the driver would probe successfully but will never be able to adjust the clocks, because the clocks were not available during probe, but became available later. For example, the clock controller for the ZynqMP is implemented in the PMU firmware and the clocks are only available after the firmware driver has been probed. Use devm_clk_get_optional() in instead of devm_clk_get() to get the optional clock and propagate all errors to the calling function. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-19xen/netback: fix error path of xenvif_connect_data()Juergen Gross1-1/+0
xenvif_connect_data() calls module_put() in case of error. This is wrong as there is no related module_get(). Remove the superfluous module_put(). Fixes: 279f438e36c0a7 ("xen-netback: Don't destroy the netdev until the vif is shut down") Cc: <stable@vger.kernel.org> # 3.12 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-19net: hns3: fix mis-counting IRQ vector numbers issueYonglong Liu6-6/+58
Currently, the num_msi_left means the vector numbers of NIC, but if the PF supported RoCE, it contains the vector numbers of NIC and RoCE(Not expected). This may cause interrupts lost in some case, because of the NIC module used the vector resources which belongs to RoCE. This patch adds a new variable num_nic_msi to store the vector numbers of NIC, and adjust the default TQP numbers and rss_size according to the value of num_nic_msi. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-19Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-2/+6
Merge misc fixes from Andrew Morton: "Rather a lot of fixes, almost all affecting mm/" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits) scripts/gdb: fix debugging modules on s390 kernel/events/uprobes.c: only do FOLL_SPLIT_PMD for uprobe register mm/thp: allow dropping THP from page cache mm/vmscan.c: support removing arbitrary sized pages from mapping mm/thp: fix node page state in split_huge_page_to_list() proc/meminfo: fix output alignment mm/init-mm.c: include <linux/mman.h> for vm_committed_as_batch mm/filemap.c: include <linux/ramfs.h> for generic_file_vm_ops definition mm: include <linux/huge_mm.h> for is_vma_temporary_stack zram: fix race between backing_dev_show and backing_dev_store mm/memcontrol: update lruvec counters in mem_cgroup_move_account ocfs2: fix panic due to ocfs2_wq is null hugetlbfs: don't access uninitialized memmaps in pfn_range_valid_gigantic() mm: memblock: do not enforce current limit for memblock_phys* family mm: memcg: get number of pages on the LRU list in memcgroup base on lru_zone_size mm/gup: fix a misnamed "write" argument, and a related bug mm/gup_benchmark: add a missing "w" to getopt string ocfs2: fix error handling in ocfs2_setattr() mm: memcg/slab: fix panic in __free_slab() caused by premature memcg pointer release mm/memunmap: don't access uninitialized memmap in memunmap_pages() ...
2019-10-19zram: fix race between backing_dev_show and backing_dev_storeChenwandun1-2/+3
CPU0: CPU1: backing_dev_show backing_dev_store ...... ...... file = zram->backing_dev; down_read(&zram->init_lock); down_read(&zram->init_init_lock) file_path(file, ...); zram->backing_dev = backing_dev; up_read(&zram->init_lock); up_read(&zram->init_lock); gets the value of zram->backing_dev too early in backing_dev_show, which resultin the value being NULL at the beginning, and not NULL later. backtrace: d_path+0xcc/0x174 file_path+0x10/0x18 backing_dev_show+0x40/0xb4 dev_attr_show+0x20/0x54 sysfs_kf_seq_show+0x9c/0x10c kernfs_seq_show+0x28/0x30 seq_read+0x184/0x488 kernfs_fop_read+0x5c/0x1a4 __vfs_read+0x44/0x128 vfs_read+0xa0/0x138 SyS_read+0x54/0xb4 Link: http://lkml.kernel.org/r/1571046839-16814-1-git-send-email-chenwandun@huawei.com Signed-off-by: Chenwandun <chenwandun@huawei.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19drivers/base/memory.c: don't access uninitialized memmaps in soft_offline_page_store()David Hildenbrand1-0/+3
Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched. Right now, when trying to soft-offline a PFN that resides on a memory block that was never onlined, one gets a misleading error with CONFIG_PAGE_POISONING: :/# echo 5637144576 > /sys/devices/system/memory/soft_offline_page [ 23.097167] soft offline: 0x150000 page already poisoned But the actual result depends on the garbage in the memmap. soft_offline_page() can only work with online pages, it returns -EIO in case of ZONE_DEVICE. Make sure to only forward pages that are online (iow, managed by the buddy) and, therefore, have an initialized memmap. Add a check against pfn_to_online_page() and similarly return -EIO. Link: http://lkml.kernel.org/r/20191010141200.8985-1-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-18Merge tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-blockLinus Torvalds9-66/+148
Pull block fixes from Jens Axboe: - NVMe pull request from Keith that address deadlocks, double resets, memory leaks, and other regression. - Fixup elv_support_iosched() for bio based devices (Damien) - Fixup for the ahci PCS quirk (Dan) - Socket O_NONBLOCK handling fix for io_uring (me) - Timeout sequence io_uring fixes (yangerkun) - MD warning fix for parameter default_layout (Song) - blkcg activation fixes (Tejun) - blk-rq-qos node deletion fix (Tejun) * tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block: nvme-pci: Set the prp2 correctly when using more than 4k page io_uring: fix logic error in io_timeout io_uring: fix up O_NONBLOCK handling for sockets md/raid0: fix warning message for parameter default_layout libata/ahci: Fix PCS quirk application blk-rq-qos: fix first node deletion of rq_qos_del() blkcg: Fix multiple bugs in blkcg_activate_policy() io_uring: consider the overflow of sequence for timeout req nvme-tcp: fix possible leakage during error flow nvmet-loop: fix possible leakage during error flow block: Fix elv_support_iosched() nvme-tcp: Initialize sk->sk_ll_usec only with NET_RX_BUSY_POLL nvme: Wait for reset state when required nvme: Prevent resets during paused controller state nvme: Restart request timers in resetting state nvme: Remove ADMIN_ONLY state nvme-pci: Free tagset if no IO queues nvme: retain split access workaround for capability reads nvme: fix possible deadlock when nvme_update_formats fails
2019-10-18Merge tag 'ceph-for-5.4-rc4' of git://github.com/ceph/ceph-clientLinus Torvalds1-3/+6
Pull ceph fixes from Ilya Dryomov: "A future-proofing decoding fix from Jeff intended for stable and a patch for a mostly benign race from Dongsheng" * tag 'ceph-for-5.4-rc4' of git://github.com/ceph/ceph-client: rbd: cancel lock_dwork if the wait is interrupted ceph: just skip unrecognized info in ceph_reply_info_extra
2019-10-18Merge tag 'for-5.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds3-45/+81
Pull device mapper fixes from Mike Snitzer: - Fix DM snapshot deadlock that can occur due to COW throttling preventing locks from being released. - Fix DM cache's GFP_NOWAIT allocation failure error paths by switching to GFP_NOIO. - Make __hash_find() static in the DM clone target. * tag 'for-5.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix bugs when a GFP_NOWAIT allocation fails dm snapshot: rework COW throttling to fix deadlock dm snapshot: introduce account_start_copy() and account_end_copy() dm clone: Make __hash_find static
2019-10-18Merge tag 'iommu-fixes-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds6-27/+70
Pull iommu fixes from Joerg Roedel: - Fixes for page-table issues on Mali GPUs - Missing free in an error path for ARM-SMMU - PASID decoding in the AMD IOMMU Event log code - Another update for the locking fixes in the AMD IOMMU driver - Reduce the calls to platform_get_irq() in the IPMMU-VMSA and Rockchip IOMMUs to get rid of the warning message added to this function recently * tag 'iommu-fixes-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Check PM_LEVEL_SIZE() condition in locked section iommu/amd: Fix incorrect PASID decoding from event log iommu/ipmmu-vmsa: Only call platform_get_irq() when interrupt is mandatory iommu/rockchip: Don't use platform_get_irq to implicitly count irqs iommu/io-pgtable-arm: Support all Mali configurations iommu/io-pgtable-arm: Correct Mali attributes iommu/arm-smmu: Free context bitmap in the err path of arm_smmu_init_domain_context
2019-10-18net: lpc_eth: parse phy nodes from device treeAlexandre Belloni1-8/+20
When connected to a micrel phy, phy_find_first doesn't work properly because the first phy found is on address 0, the broadcast address but, the first thing the phy driver is doing is disabling this broadcast address. The phy is then available only on address 1 but the mdio driver doesn't know about it. Instead, register the mdio bus using of_mdiobus_register and try to find the phy description in device tree before falling back to phy_find_first. This ultimately also allows to describe the interrupt the phy is connected to. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18net: usb: lan78xx: Connect PHY before registering MACAndrew Lunn1-6/+6
As soon as the netdev is registers, the kernel can start using the interface. If the driver connects the MAC to the PHY after the netdev is registered, there is a race condition where the interface can be opened without having the PHY connected. Change the order to close this race condition. Fixes: 92571a1aae40 ("lan78xx: Connect phy early") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18mlxsw: spectrum_trap: Push Ethernet header before reporting trapIdo Schimmel1-0/+1
devlink maintains packets and bytes statistics for each trap. Since eth_type_trans() was called to set the skb's protocol, the data pointer no longer points to the start of the packet and the bytes accounting is off by 14 bytes. Fix this by pushing the skb's data pointer to the start of the packet. Fixes: b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18mlxsw: spectrum: Register switched port analyzers (SPAN) as resourceDanielle Ratson3-2/+73
The switch supports an enhanced switched port analyzer that enables selecting network traffic for analysis by a network analyzer. SPAN agents are configured and consumed whenever a tc filter is added with a mirror action to a new destination. The destination can either be a physical port (e.g., swp1), a VLAN device or a gretap. Expose the maximum number of SPAN agents and their current usage to the user. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18Merge tag 'mmc-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds4-17/+23
Pull MMC fixes from Ulf Hansson: "MMC host: - sdhci-iproc: Prevent some spurious interrupts - renesas_sdhi/sh_mmcif: Avoid false warnings about IRQs not found MEMSTICK host: - jmb38x_ms: Fix an error handling path at ->probe()" * tag 'mmc-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: memstick: jmb38x_ms: Fix an error handling path in 'jmb38x_ms_probe()' mmc: sdhci-iproc: fix spurious interrupts on Multiblock reads with bcm2711 mmc: sh_mmcif: Use platform_get_irq_optional() for optional interrupt mmc: renesas_sdhi: Do not use platform_get_irq() to count interrupts
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.