aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-07-12nfp: freeing the wrong variableDan Carpenter1-1/+1
We accidentally free a NULL pointer and leak the pointer we want to free. Also you can tell from the label name what was intended. :) Fixes: abfcdc1de9bf ("nfp: add a stats handler for flower offloads") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12mlxsw: spectrum_switchdev: Check status of memory allocationIdo Schimmel1-0/+6
We can't rely on kzalloc() always succeeding, so check its return value. Suppresses the following smatch error: mlxsw_sp_switchdev_event() error: potential null dereference 'switchdev_work->fdb_info.addr'. (kzalloc returns null) Fixes: af061378924f ("mlxsw: spectrum_switchdev: Add support for learning FDB through notification") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12mlxsw: spectrum_switchdev: Remove unused variableIdo Schimmel1-3/+0
Commit 10e23eb299fa ("mlxsw: spectrum: Remove support for bypass bridge port attributes/vlan set") removed statements that used 'bridge_vlan', but didn't remove the variable itself resulting in the following warning with W=1: warning: variable ‘bridge_vlan’ set but not used [-Wunused-but-set-variable] Remove the variable and suppress the warning. Fixes: 10e23eb299fa ("mlxsw: spectrum: Remove support for bypass bridge port attributes/vlan set") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12mlxsw: spectrum_router: Fix use-after-free in route replaceIdo Schimmel1-0/+3
While working on IPv6 route replace I realized we can have a use-after-free in IPv4 in case the replaced route is offloaded and the only one using its FIB info. The problem is that fib_table_insert() drops the reference on the FIB info of the replaced routes which is eventually freed via call_rcu(). Since the driver doesn't hold a reference on this FIB info it can cause a use-after-free when it tries to clear the RTNH_F_OFFLOAD flag stored in fi->fib_flags. After running the following commands in a loop for enough time with a KASAN enabled kernel I finally got the below trace. $ ip route add 192.168.50.0/24 via 192.168.200.1 dev enp3s0np3 $ ip route replace 192.168.50.0/24 dev enp3s0np5 $ ip route del 192.168.50.0/24 dev enp3s0np5 BUG: KASAN: use-after-free in mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] Read of size 4 at addr ffff8803717d9820 by task kworker/u4:2/55 [...] ? mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] ? mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] ? mlxsw_sp_router_neighs_update_work+0x1cd0/0x1ce0 [mlxsw_spectrum] ? mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] __asan_load4+0x61/0x80 mlxsw_sp_fib_entry_offload_unset+0xa7/0x120 [mlxsw_spectrum] mlxsw_sp_fib_entry_offload_refresh+0xb6/0x370 [mlxsw_spectrum] mlxsw_sp_router_fib_event_work+0xd1c/0x2780 [mlxsw_spectrum] [...] Freed by task 5131: save_stack_trace+0x16/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x70/0xc0 kfree+0x144/0x570 free_fib_info_rcu+0x2e7/0x410 rcu_process_callbacks+0x4f8/0xe30 __do_softirq+0x1d3/0x9e2 Fix this by taking a reference on the FIB info when creating the nexthop group it represents and drop it when the group is destroyed. Fixes: 599cf8f95f22 ("mlxsw: spectrum_router: Add support for route replace") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-12mlxsw: spectrum_router: Add missing rollbackIdo Schimmel1-0/+1
With this patch the error path of mlxsw_sp_nexthop_init() is symmetric with mlxsw_sp_nexthop_fini(). Noticed during code review. Fixes: a8c970142798 ("mlxsw: spectrum_router: Refactor nexthop init routine") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11tap: convert a mutex to a spinlockWANG Cong1-9/+9
We are not allowed to block on the RCU reader side, so can't just hold the mutex as before. As a quick fix, convert it to a spinlock. Fixes: d9f1f61c0801 ("tap: Extending tap device create/destroy APIs") Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Sainath Grandhi <sainath.grandhi@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11cxgb4: fix BUG() on interrupt deallocating path of ULDGuilherme G. Piccoli2-22/+36
Since the introduction of ULD (Upper-Layer Drivers), the MSI-X deallocating path changed in cxgb4: the driver frees the interrupts of ULD when unregistering it or on shutdown PCI handler. Problem is that if a MSI-X is not freed before deallocated in the PCI layer, it will trigger a BUG() due to still "alive" interrupt being tentatively quiesced. The below trace was observed when doing a simple unbind of Chelsio's adapter PCI function, like: "echo 001e:80:00.4 > /sys/bus/pci/drivers/cxgb4/unbind" Trace: kernel BUG at drivers/pci/msi.c:352! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c0000000005a5e60] free_msi_irqs+0xa0/0x250 LR [c0000000005a5e50] free_msi_irqs+0x90/0x250 Call Trace: [c0000000005a5e50] free_msi_irqs+0x90/0x250 (unreliable) [c0000000005a72c4] pci_disable_msix+0x124/0x180 [d000000011e06708] disable_msi+0x88/0xb0 [cxgb4] [d000000011e06948] free_some_resources+0xa8/0x160 [cxgb4] [d000000011e06d60] remove_one+0x170/0x3c0 [cxgb4] [c00000000058a910] pci_device_remove+0x70/0x110 [c00000000064ef04] device_release_driver_internal+0x1f4/0x2c0 ... This patch fixes the issue by refactoring the shutdown path of ULD on cxgb4 driver, by properly freeing and disabling interrupts on PCI remove handler too. Fixes: 0fbc81b3ad51 ("Allocate resources dynamically for all cxgb4 ULD's") Reported-by: Harsha Thyagaraja <hathyaga@in.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11qed: Fix printk option passed when printing ipv6 addressesKalderon, Michal1-3/+3
The option "h" (host order ) exists for ipv4 only. Remove the h when printing ipv6 addresses. Lead to the following smatch warning: drivers/net/ethernet/qlogic/qed/qed_iwarp.c:585 qed_iwarp_print_tcp_ramrod() warn: '%pI6' can only be followed by c drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1521 qed_iwarp_print_cm_info() warn: '%pI6' can only be followed by c Fixes commit 456a584947d5 ("qed: iWARP CM add passive side connect") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11net: stmmac: Make 'alloc_dma_[rt]x_desc_resources()' look even closerChristophe Jaillet1-6/+6
'alloc_dma_[rt]x_desc_resources()' functions look very close. Remove a useless initialization and use the same label name for error handling path in order to get them even closer. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11net: stmmac: Fix error handling path in 'alloc_dma_tx_desc_resources()'Christophe Jaillet1-1/+1
If the first 'kmalloc_array' within the loop fails, we should free what as already been allocated, as done in all other error handling path. Fixes: ce736788e8a9 ("net: stmmac: adding multiple buffers for TX") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11net: stmmac: Fix error handling path in 'alloc_dma_rx_desc_resources()'Christophe Jaillet1-1/+1
If the first 'kmalloc_array' within the loop fails, we should free what as already been allocated, as done in all other error handling path. Fixes: 54139cf3bb33 ("net: stmmac: adding multiple buffers for rx") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11cisco: enic: Fic an error handling path in 'vnic_dev_init_devcmd2()'Christophe Jaillet1-4/+5
if 'ioread32()' returns 0xFFFFFFF, we have to go through the error handling path as done everywhere else in this function. Move the 'err_free_wq' label to better match its name and its location and add a new label 'err_disable_wq'. Update the code accordingly. Fixes: 373fb0873d43 ("enic: add devcmd2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11bnxt_en: Fix SRIOV on big-endian architecture.Michael Chan1-5/+10
The PF driver sets up a list of firmware commands from the VF driver that needs to be forwarded to the PF for approval. This list is a 256-bit bitmap. The code that sets up the bitmap falls apart on big-endian architecture. __set_bit() does not work because it operates on long types whereas the firmware interface is defined in u32 types, causing bits in the wrong 32-bit word to be set. Fix it by setting the proper bits on an array of u32. Fixes: de68f5de5651 ("bnxt_en: Fix bitmap declaration to work on 32-bit arches.") Reported-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11bnxt_en: Fix bug in ethtool -L.Michael Chan4-9/+8
When changing channels from combined to rx/tx or vice versa, the code uses the wrong "sh" parameter to determine if we are reserving rings for shared or non-shared mode. It should be using the ethtool requested "sh" parameter instead of the current "sh" parameter. Fix it by passing the "sh" parameter to bnxt_reserve_rings(). For ethtool, we will pass in the requested "sh" parameter. Fixes: 391be5c27364 ("bnxt_en: Implement new scheme to reserve tx rings.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11bnxt_en: Fix race conditions in .ndo_get_stats64().Michael Chan2-2/+17
.ndo_get_stats64() may not be protected by RTNL and can race with .ndo_stop() or other ethtool operations that can free the statistics memory. Fix it by setting a new flag BNXT_STATE_READ_STATS and then proceeding to read statistics memory only if the state is OPEN. The close path that frees the memory clears the OPEN state and then waits for the BNXT_STATE_READ_STATS to clear before proceeding to free the statistics memory. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-10net/mlx5: IPSec, fix 64-bit division correctlyArnd Bergmann1-3/+1
The new IPSec offload code introduced a build error: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.o: In function `mlx5e_ipsec_build_inverse_table': ipsec_rxtx.c:(.text+0x556): undefined reference Another patch was added on top to fix the build error, but that introduced a new bug, as we now use the remainder of the division rather than the result. This makes it use the correct helper function instead. Fixes: 5dfd87b67cd9 ("net/mlx5: IPSec, Fix 64-bit division on 32-bit builds") Fixes: 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-09Merge tag 'mlx5-fixes-2017-07-09' of https://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller11-6/+16
Saeed Mahameed says: ==================== mlx5-fixes-2017-07-09 This series includes fixes to mlx5 driver: - Compilation warnings and issues introduced on v4.12 - Initialize CEE's getpermhwaddr address buffer to 0xff ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-08Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds59-727/+3364
Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...
2017-07-08Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds9-47/+92
Pull MD update from Shaohua Li: - fixed deadlock in MD suspend and a potential bug in bio allocation (Neil Brown) - fixed signal issue (Mikulas Patocka) - fixed typo in FailFast test (Guoqing Jiang) - other trival fixes * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: MD: fix sleep in atomic MD: fix a null dereference md: use a separate bio_set for synchronous IO. md: change the initialization value for a spare device spot to MD_DISK_ROLE_SPARE md/raid1: remove unused bio in sync_request_write md/raid10: fix FailFast test for wrong device md: don't use flush_signals in userspace processes md: fix deadlock between mddev_suspend() and md_write_start()
2017-07-08Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds24-68/+1274
Pull input updates from Dmitry Torokhov: - a new driver for STM FingerTip touchscreen - a new driver for D-Link DIR-685 touch keys - updated list of supported devices in xpad driver - other assorted updates and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (23 commits) MAINTAINERS: update input subsystem patterns Input: introduce KEY_ASSISTANT Input: xpad - sync supported devices with XBCD Input: xpad - sync supported devices with 360Controller Input: xen-kbdfront - use string constants from PV protocol Input: stmfts - mark all PM functions as __maybe_unused Input: add support for the STMicroelectronics FingerTip touchscreen Input: add D-Link DIR-685 touchkeys driver Input: s3c2410_ts - handle return value of clk_prepare_enable Input: axp20x-pek - add wakeup support Input: synaptics-rmi4 - use %phN to form F34 configuration ID Input: synaptics-rmi4 - change a char type to u8 Input: sparse-keymap - remove sparse_keymap_free() Input: tsc2007 - move header file out of I2C realm Input: mms114 - move header file out of I2C realm Input: mcs - move header file out of I2C realm Input: lm8323 - move header file out of I2C realm Input: elantech - force relative mode on a certain module Input: elan_i2c - add support for fetching chip type on newer hardware Input: elan_i2c - check if device is there before really probing ...
2017-07-08Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds21-378/+2824
Pull dmaengine updates from Vinod Koul: - removal of AVR32 support in dw driver as AVR32 is gone - new driver for Broadcom stream buffer accelerator (SBA) RAID driver - add support for Faraday Technology FTDMAC020 in amba-pl08x driver - IOMMU support in pl330 driver - updates to bunch of drivers * tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: qcom_hidma: correct API violation for submit dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy dmaengine: tegra-apb: Really fix runtime-pm usage dmaengine: fsl_raid: make of_device_ids const. dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly dmaengine: Kconfig: Simplify the help text for MXS_DMA dmaengine: pl330: Delete unused functions dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once() dmaengine: Kconfig: Extend the dependency for MXS_DMA dmaengine: mxs: Use %zu for printing a size_t variable dmaengine: ste_dma40: Cleanup scatterlist layering violations dmaengine: imx-dma: cleanup scatterlist layering violations dmaengine: use proper name for the R-Car SoC dmaengine: imx-sdma: Fix compilation warning. dmaengine: imx-sdma: Handle return value of clk_prepare_enable dmaengine: pl330: Add IOMMU support to slave tranfers dmaengine: DW DMAC: Handle return value of clk_prepare_enable dmaengine: pl08x: use GENMASK() to create bitmasks dmaengine: pl08x: Add support for Faraday Technology FTDMAC020 ...
2017-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds13-38/+40
Pull networking fixes from David Miller: "Mostly fixing some light fallout from the changes that went into the merge window. 1) Fix memory leaks on network namespace teardown in netfilter, from Liping Zhang. 2) When comparing ipv6 nexthops, we have to take the lightweight tunnel state into account as well. From David Ahern. 3) Fix socket option object length check in the new TLS code, from Matthias Rosenfelder. 4) Fix memory leak in nfp driver flower support, from Jakub Kicinski. 5) Several netlink attribute validation fixes in cfg80211, from Srinivas Dasari. 6) Fix context array leak in virtio_net, from Jason Wang. 7) SKB use after free in hns driver, from Yusheng Lin. 8) Fix socket leak on accept() in RDS, from Sowmini Varadhan. Also add a WARN_ON() to sock_graft() so other protocol stacks don't trip over this as well" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: ethernet: mediatek: remove useless code in mtk_probe() mpls: fix uninitialized in_label var warning in mpls_getroute doc: SKB_GSO_[IPIP|SIT] have been replaced bonding: avoid NETDEV_CHANGEMTU event when unregistering slave net/sock: add WARN_ON(parent->sk) in sock_graft() rds: tcp: use sock_create_lite() to create the accept socket net: hns: Fix a skb used after free bug net: hns: Fix a wrong op phy C45 code net: macb: Adding Support for Jumbo Frames up to 10240 Bytes in SAMA5D3 net: Update networking MAINTAINERS entry. virtio-net: fix leaking of ctx array cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE cfg80211: Check if NAN service ID is of expected size cfg80211: Check if PMKID attribute is of expected size arcnet: com20020-pci: Fix an error handling path in 'com20020pci_probe()' nfp: flower: add missing clean up call to avoid memory leaks vrf: fix bug_on triggered by rx when destroying a vrf ptp: dte: Use LL suffix for 64-bit constants sctp: set the value of flowi6_oif to sk_bound_dev_if to make sctp_v6_get_dst to find the correct route entry. ...
2017-07-08Merge branch 'for-spi' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-31/+11
Pull spi uaccess delousing from Al Viro: "Getting rid of pointless __get_user() and friends in drivers/spi. [ the only reason it's on a separate branch is that I hoped it would be picked by spi folks; looks like mail asking them to grab it got lost and I hadn't followed up on that ]" * 'for-spi' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: spidev: quit messing with access_ok()
2017-07-08net: ethernet: mediatek: remove useless code in mtk_probe()Gustavo A. R. Silva1-5/+0
Remove useless local variables _match_, _soc_ and the code related. Notice that const struct of_device_id of_mtk_match[] = { { .compatible = "mediatek,mt2701-eth" }, {}, }; So match->data is NULL. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-08bonding: avoid NETDEV_CHANGEMTU event when unregistering slaveWANG Cong1-6/+9
As Hongjun/Nicolas summarized in their original patch: " When a device changes from one netns to another, it's first unregistered, then the netns reference is updated and the dev is registered in the new netns. Thus, when a slave moves to another netns, it is first unregistered. This triggers a NETDEV_UNREGISTER event which is caught by the bonding driver. The driver calls bond_release(), which calls dev_set_mtu() and thus triggers NETDEV_CHANGEMTU (the device is still in the old netns). " This is a very special case, because the device is being unregistered no one should still care about the NETDEV_CHANGEMTU event triggered at this point, we can avoid broadcasting this event on this path, and avoid touching inetdev_event()/addrconf_notify() path. It requires to export __dev_set_mtu() to bonding driver. Reported-by: Hongjun Li <hongjun.li@6wind.com> Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-08net: hns: Fix a skb used after free bugYunsheng Lin2-15/+13
skb maybe freed in hns_nic_net_xmit_hw() and return NETDEV_TX_OK, which cause hns_nic_net_xmit to use a freed skb. BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x62c/0x940... [17659.112635] alloc_debug_processing+0x18c/0x1a0 [17659.117208] __slab_alloc+0x52c/0x560 [17659.120909] kmem_cache_alloc_node+0xac/0x2c0 [17659.125309] __alloc_skb+0x6c/0x260 [17659.128837] tcp_send_ack+0x8c/0x280 [17659.132449] __tcp_ack_snd_check+0x9c/0xf0 [17659.136587] tcp_rcv_established+0x5a4/0xa70 [17659.140899] tcp_v4_do_rcv+0x27c/0x620 [17659.144687] tcp_prequeue_process+0x108/0x170 [17659.149085] tcp_recvmsg+0x940/0x1020 [17659.152787] inet_recvmsg+0x124/0x180 [17659.156488] sock_recvmsg+0x64/0x80 [17659.160012] SyS_recvfrom+0xd8/0x180 [17659.163626] __sys_trace_return+0x0/0x4 [17659.167506] INFO: Freed in kfree_skbmem+0xa0/0xb0 age=23 cpu=1 pid=13 [17659.174000] free_debug_processing+0x1d4/0x2c0 [17659.178486] __slab_free+0x240/0x390 [17659.182100] kmem_cache_free+0x24c/0x270 [17659.186062] kfree_skbmem+0xa0/0xb0 [17659.189587] __kfree_skb+0x28/0x40 [17659.193025] napi_gro_receive+0x168/0x1c0 [17659.197074] hns_nic_rx_up_pro+0x58/0x90 [17659.201038] hns_nic_rx_poll_one+0x518/0xbc0 [17659.205352] hns_nic_common_poll+0x94/0x140 [17659.209576] net_rx_action+0x458/0x5e0 [17659.213363] __do_softirq+0x1b8/0x480 [17659.217062] run_ksoftirqd+0x64/0x80 [17659.220679] smpboot_thread_fn+0x224/0x310 [17659.224821] kthread+0x150/0x170 [17659.228084] ret_from_fork+0x10/0x40 BUG: KASAN: use-after-free in hns_nic_net_xmit+0x8c/0xc0... [17751.080490] __slab_alloc+0x52c/0x560 [17751.084188] kmem_cache_alloc+0x244/0x280 [17751.088238] __build_skb+0x40/0x150 [17751.091764] build_skb+0x28/0x100 [17751.095115] __alloc_rx_skb+0x94/0x150 [17751.098900] __napi_alloc_skb+0x34/0x90 [17751.102776] hns_nic_rx_poll_one+0x180/0xbc0 [17751.107097] hns_nic_common_poll+0x94/0x140 [17751.111333] net_rx_action+0x458/0x5e0 [17751.115123] __do_softirq+0x1b8/0x480 [17751.118823] run_ksoftirqd+0x64/0x80 [17751.122437] smpboot_thread_fn+0x224/0x310 [17751.126575] kthread+0x150/0x170 [17751.129838] ret_from_fork+0x10/0x40 [17751.133454] INFO: Freed in kfree_skbmem+0xa0/0xb0 age=19 cpu=7 pid=43 [17751.139951] free_debug_processing+0x1d4/0x2c0 [17751.144436] __slab_free+0x240/0x390 [17751.148051] kmem_cache_free+0x24c/0x270 [17751.152014] kfree_skbmem+0xa0/0xb0 [17751.155543] __kfree_skb+0x28/0x40 [17751.159022] napi_gro_receive+0x168/0x1c0 [17751.163074] hns_nic_rx_up_pro+0x58/0x90 [17751.167041] hns_nic_rx_poll_one+0x518/0xbc0 [17751.171358] hns_nic_common_poll+0x94/0x140 [17751.175585] net_rx_action+0x458/0x5e0 [17751.179373] __do_softirq+0x1b8/0x480 [17751.183076] run_ksoftirqd+0x64/0x80 [17751.186691] smpboot_thread_fn+0x224/0x310 [17751.190826] kthread+0x150/0x170 [17751.194093] ret_from_fork+0x10/0x40 Fixes: 13ac695e7ea1 ("net:hns: Add support of Hip06 SoC to the Hislicon Network Subsystem") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: lipeng <lipeng321@huawei.com> Reported-by: Jun He <hjat2005@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-08net: hns: Fix a wrong op phy C45 codeYunsheng Lin1-1/+1
As the user manual described, the second step to write to C45 phy by mdio should be data, but not address. Here we should fix this issue. Fixes: 5b904d39406a ("net: add Hisilicon Network Subsystem MDIO support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: lipeng <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-08net: macb: Adding Support for Jumbo Frames up to 10240 Bytes in SAMA5D3vishnuvardhan1-1/+2
As per the SAMA5D3 device specification it supports Jumbo frames. But the suggested flag and length of bytes it supports was not updated in this driver config_structure. The maximum jumbo frames the device supports : 10240 bytes as per the device spec. While changing the MTU value greater than 1500, it threw error: sudo ifconfig eth1 mtu 9000 SIOCSIFMTU: Invalid argument Add this support to driver so that it works as expected and designed. Signed-off-by: vishnuvardhan <vardhanraj4143@gmail.com> [nicolas.ferre@microchip.com: modify slightly commit msg] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-07Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linuxLinus Torvalds1-0/+1
Pull Writeback error handling updates from Jeff Layton: "This pile represents the bulk of the writeback error handling fixes that I have for this cycle. Some of the earlier patches in this pile may look trivial but they are prerequisites for later patches in the series. The aim of this set is to improve how we track and report writeback errors to userland. Most applications that care about data integrity will periodically call fsync/fdatasync/msync to ensure that their writes have made it to the backing store. For a very long time, we have tracked writeback errors using two flags in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a writeback error occurs (via mapping_set_error) and are cleared as a side-effect of filemap_check_errors (as you noted yesterday). This model really sucks for userland. Only the first task to call fsync (or msync or fdatasync) will see the error. Any subsequent task calling fsync on a file will get back 0 (unless another writeback error occurs in the interim). If I have several tasks writing to a file and calling fsync to ensure that their writes got stored, then I need to have them coordinate with one another. That's difficult enough, but in a world of containerized setups that coordination may even not be possible. But wait...it gets worse! The calls to filemap_check_errors can be buried pretty far down in the call stack, and there are internal callers of filemap_write_and_wait and the like that also end up clearing those errors. Many of those callers ignore the error return from that function or return it to userland at nonsensical times (e.g. truncate() or stat()). If I get back -EIO on a truncate, there is no reason to think that it was because some previous writeback failed, and a subsequent fsync() will (incorrectly) return 0. This pile aims to do three things: 1) ensure that when a writeback error occurs that that error will be reported to userland on a subsequent fsync/fdatasync/msync call, regardless of what internal callers are doing 2) report writeback errors on all file descriptions that were open at the time that the error occurred. This is a user-visible change, but I think most applications are written to assume this behavior anyway. Those that aren't are unlikely to be hurt by it. 3) document what filesystems should do when there is a writeback error. Today, there is very little consistency between them, and a lot of cargo-cult copying. We need to make it very clear what filesystems should do in this situation. To achieve this, the set adds a new data type (errseq_t) and then builds new writeback error tracking infrastructure around that. Once all of that is in place, we change the filesystems to use the new infrastructure for reporting wb errors to userland. Note that this is just the initial foray into cleaning up this mess. There is a lot of work remaining here: 1) convert the rest of the filesystems in a similar fashion. Once the initial set is in, then I think most other fs' will be fairly simple to convert. Hopefully most of those can in via individual filesystem trees. 2) convert internal waiters on writeback to use errseq_t for detecting errors instead of relying on the AS_* flags. I have some draft patches for this for ext4, but they are not quite ready for prime time yet. This was a discussion topic this year at LSF/MM too. If you're interested in the gory details, LWN has some good articles about this: https://lwn.net/Articles/718734/ https://lwn.net/Articles/724307/" * tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: btrfs: minimal conversion to errseq_t writeback error reporting on fsync xfs: minimal conversion to errseq_t writeback error reporting ext4: use errseq_t based error handling for reporting data writeback errors fs: convert __generic_file_fsync to use errseq_t based reporting block: convert to errseq_t based writeback error tracking dax: set errors in mapping when writeback fails Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error fs: new infrastructure for writeback error handling and reporting lib: add errseq_t type and infrastructure for handling it mm: don't TestClearPageError in __filemap_fdatawait_range mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails jbd2: don't clear and reset errors after waiting on writeback buffer: set errors in mapping at the time that the error occurs fs: check for writeback errors after syncing out buffers in generic_file_fsync buffer: use mapping_set_error instead of setting the flag mm: fix mapping_set_error call in me_pagecache_dirty
2017-07-07Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds11-133/+259
Pull security layer fixes from James Morris: "Bugfixes for TPM and SELinux" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: IB/core: Fix static analysis warning in ib_policy_change_task IB/core: Fix uninitialized variable use in check_qp_port_pkey_settings tpm: do not suspend/resume if power stays on tpm: use tpm2_pcr_read() in tpm2_do_selftest() tpm: use tpm_buf functions in tpm2_pcr_read() tpm_tis: make ilb_base_addr static tpm: consolidate the TPM startup code tpm: Enable CLKRUN protocol for Braswell systems tpm/tpm_crb: fix priv->cmd_size initialisation tpm: fix a kernel memory leak in tpm-sysfs.c tpm: Issue a TPM2_Shutdown for TPM2 devices. Add "shutdown" to "struct class".
2017-07-07Merge tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds11-61/+369
Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for STRICT_KERNEL_RWX on 64-bit server CPUs. - Platform support for FSP2 (476fpe) board - Enable ZONE_DEVICE on 64-bit server CPUs. - Generic & powerpc spin loop primitives to optimise busy waiting - Convert VDSO update function to use new update_vsyscall() interface - Optimisations to hypercall/syscall/context-switch paths - Improvements to the CPU idle code on Power8 and Power9. As well as many other fixes and improvements. Thanks to: Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman Khandual, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe Lombard, Colin Ian King, Dan Carpenter, Gautham R. Shenoy, Hari Bathini, Ian Munsie, Ivan Mikhaylov, Javier Martinez Canillas, Madhavan Srinivasan, Masahiro Yamada, Matt Brown, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pavel Machek, Russell Currey, Santosh Sivaraj, Stephen Rothwell, Thiago Jung Bauermann, Yang Li" * tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs powerpc/mm/radix: Implement STRICT_RWX/mark_rodata_ro() for Radix powerpc/mm/hash: Implement mark_rodata_ro() for hash powerpc/vmlinux.lds: Align __init_begin to 16M powerpc/lib/code-patching: Use alternate map for patch_instruction() powerpc/xmon: Add patch_instruction() support for xmon powerpc/kprobes/optprobes: Use patch_instruction() powerpc/kprobes: Move kprobes over to patch_instruction() powerpc/mm/radix: Fix execute permissions for interrupt_vectors powerpc/pseries: Fix passing of pp0 in updatepp() and updateboltedpp() powerpc/64s: Blacklist rtas entry/exit from kprobes powerpc/64s: Blacklist functions invoked on a trap powerpc/64s: Un-blacklist system_call() from kprobes powerpc/64s: Move system_call() symbol to just after setting MSR_EE powerpc/64s: Blacklist system_call() and system_call_common() from kprobes powerpc/64s: Convert .L__replay_interrupt_return to a local label powerpc64/elfv1: Only dereference function descriptor for non-text symbols cxl: Export library to support IBM XSL powerpc/dts: Use #include "..." to include local DT powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8 ...
2017-07-07Merge tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds5-0/+21
Pull USB fixes from Greg KH: "Here are some remaining USB fixes for 4.13-rc1. They were originally scheduled for 4.12-final, but I didn't send them to you in time. Because of that, they were in a separate branch from the larger USB set of patches, so here they are in a separate pull request. Nothing major here a all, just three small patches: - some usb-serial new device ids - xhci bugfix for some crazy AMD hardware All of these have been in linux-next for a long time with no reported issues" * tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: Limit USB2 port wake support for AMD Promontory hosts USB: serial: qcserial: new Sierra Wireless EM7305 device ID USB: serial: option: add two Longcheer device ids
2017-07-07Merge tag 'backlight-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds3-7/+12
Pull backlight updates from Lee Jones: "Core Framework: - Report correct error status to user Fix-ups: - Move Backlight headers out of I2C (adp8860, adp8870)" * tag 'backlight-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: video: adp8870: move header file out of I2C realm backlight: adp8860: Move header file out of I2C realm backlight: Report error on failure
2017-07-07Merge (most of) tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds30-181/+656
Pull MFD updates from Lee Jones: "New Drivers: - Intel Cherry Trail Whiskey Cove PMIC - TI LP87565 PMIC New Device Support: - Add support for Cannonlake to intel-lpss-pci - Add support for Simatic IOT2000 to intel_quark_i2c_gpio New Functionality: - Add Regulator support (axp20x) Fix-ups: - Rework IRQ handling (intel_soc_pmic_bxtwc, rtsx_pcr, cros_ec) - Remove unused/unwelcome code (ipaq-micro, wm831x-core, da9062-core) - Provide deregistration on unbind (rn5t618) - Rework DT code/documentation (arizona) - Constify things (fsl-imx25-tsadc) - MAINTAINERS updates (DA9062/61) - Kconfig configuration adaptions (INTEL_SOC_PMIC, MFD_AXP20X_I2C) - Switch to DMI matching (intel_quark_i2c_gpio) - Provide an appropriate level of error checking (wm831x-{i2c,spi}, twl4030-irq, tc6393xb) - Make use of devm_* (resource handling) calls (intel_soc_pmic_bxtwc, stm32-timers, atmel-flexcom, cros_ec, fsl-imx25-tsadc, exynos-lpass, palmas, qcom-spmi-pmic, smsc-ece1099, motorola-cpcap)" [ Skipped the last commit in that series that added eight thousand lines of pointless repeated register definitions. - Linus ] * tag 'mfd-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (38 commits) mfd: Add LP87565 PMIC support mfd: cros_ec: Free IRQ on exit dt-bindings: vendor-prefixes: Add arctic to vendor prefix mfd: da9061: Fix to remove BBAT_CONT register from chip model mfd: da9061: Fix to remove BBAT_CONT register from chip model mfd: axp20x-i2c: Document that this must be builtin on x86 mfd: Add Cherry Trail Whiskey Cove PMIC driver mfd: tc6393xb: Handle return value of clk_prepare_enable mfd: intel_quark_i2c_gpio: Add support for SIMATIC IOT2000 platform mfd: intel_quark_i2c_gpio: Use dmi_system_id table for retrieving frequency mfd: motorola-cpcap: Use devm_of_platform_populate() mfd: smsc-ece: Use devm_of_platform_populate() mfd: qcom-spmi-pmic: Use devm_of_platform_populate() mfd: palmas: Use devm_of_platform_populate() mfd: exynos: Use devm_of_platform_populate() mfd: fsl-imx25: Use devm_of_platform_populate() mfd: cros_ec: Use devm_of_platform_populate() mfd: atmel: Use devm_of_platform_populate() mfd: stm32-timers: Use devm_of_platform_populate() mfd: intel_soc_pmic: Select designware i2c-bus driver ...
2017-07-07Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds28-445/+1383
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...
2017-07-07Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds105-974/+8738
Pull clk updates from Stephen Boyd: "This time we've got one core change to introduce a bulk clk_get API, some new clk drivers and updates for old ones. The diff is pretty spread out across a handful of different SoC clk drivers for Broadcom, TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to the introduction of new drivers. Core: - New clk bulk get APIs - Clk divider APIs gained the ability to consider a different parent than the current one New Drivers: - Renesas r8a779{0,1,2,4} CPG/MSSR - TI Keystone SCI firmware controlled clks and OMAP4 clkctrl - Qualcomm IPQ8074 SoCs - Cortina Systems Gemini (SL3516/CS3516) - Rockchip rk3128 SoCs - Allwinner A83T clk control units - Broadcom Stingray SoCs - CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs Removed Drivers: - Old non-DT version of the Realview clk driver Updates: - Renesas Kconfig/Makefile cleanups - Amlogic CEC EE clk support - Improved Armada 7K/8K cp110 clk support - Rockchip clk id exposing, critical clk markings - Samsung converted to clk_hw registration APIs - Fixes for Samsung exynos5420 audio clks - USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for hi3660" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (147 commits) clk: gemini: Read status before using the value clk: scpi: error when clock fails to register clk: at91: Add sama5d2 suspend/resume gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K clk: keystone: TI_SCI_PROTOCOL is needed for clk driver clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL clk: uniphier: provide NAND controller clock rate clk: hisilicon: add usb2 clocks for hi3798cv200 SoC clk: Add Gemini SoC clock controller clk: iproc: Remove __init marking on iproc_pll_clk_setup() clk: bcm: Add clocks for Stingray SOC dt-bindings: clk: Extend binding doc for Stingray SOC clk: mediatek: export cpu multiplexer clock for MT8173 SoCs clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work clk: renesas: cpg-mssr: Use of_device_get_match_data() helper clk: hi6220: add acpu clock clk: zx296718: export I2S mux clocks clk: imx7d: create clocks behind rawnand clock gate clk: hi3660: Set PPLL2 to 2880M ...
2017-07-07virtio-net: fix leaking of ctx arrayJason Wang1-0/+1
Fixes: commit d45b897b11ea ("virtio_net: allow specifying context for rx") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-07Merge branch 'pci/host-tango' into nextBjorn Helgaas3-0/+156
* pci/host-tango: PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
2017-07-07PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge supportMarc Gonzalez3-0/+156
This driver is required to work around several hardware bugs in the PCIe controller. The SMP8759 does not support legacy interrupts or IO space. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> [bhelgaas: add CONFIG_BROKEN dependency, various cleanups] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-07Merge tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds13-826/+910
Pull DeviceTree updates from Rob Herring: - vsprintf format specifier %pOF for device_node's. This will enable us to stop storing the full node names. Conversion of users will happen next cycle. - Update documentation to point to DT specification instead of ePAPR. - Split out graph and property functions to a separate file. - New of-graph functions for ALSA - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull, Itead, and BananaPi. - Improve dtx_diff utility filename printing. * tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits) of: document /sys/firmware/fdt dt-bindings: Add RISC-V vendor prefix vsprintf: Add %p extension "%pOF" for device tree of: find_node_by_full_name rewrite to compare each level of: use kbasename instead of open coding dt-bindings: thermal: add file extension to brcm,ns-thermal of: update ePAPR references to point to Devicetree Specification scripts/dtc: dtx_diff - Show real file names in diff header of: detect invalid phandle in overlay of: be consistent in form of file mode of: make __of_attach_node() static of: address.c header comment typo of: fdt.c header comment typo of: make of_fdt_is_compatible() static dt-bindings: display-timing.txt convert non-ascii characters to ascii Documentation: remove overlay-notes reference to non-existent file dt-bindings: usb: exynos-usb: Add missing required VDD properties dt-bindings: Add vendor prefix for Linksys MAINTAINERS: add device tree ABI documentation file of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd ...
2017-07-07Merge branch 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds4-6/+149
Pull mailbox updates from Jassi Brar: - Minor improvement : avoid requiring unnecessary startup/shutdown callback that many drivers seem to not need - New controller driver for Qualcomm's APCS IPC * 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Introduce Qualcomm APCS IPC driver dt-bindings: mailbox: Introduce Qualcomm APCS global binding mailbox: Make startup and shutdown ops optional
2017-07-07Merge tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds27-172/+1204
Pull libnvdimm updates from Dan Williams: "libnvdimm updates for the latest ACPI and UEFI specifications. This pull request also includes new 'struct dax_operations' enabling to undo the abuse of copy_user_nocache() for copy operations to pmem. The dax work originally missed 4.12 to address concerns raised by Al. Summary: - Introduce the _flushcache() family of memory copy helpers and use them for persistent memory write operations on x86. The _flushcache() semantic indicates that the cache is either bypassed for the copy operation (movnt) or any lines dirtied by the copy operation are written back (clwb, clflushopt, or clflush). - Extend dax_operations with ->copy_from_iter() and ->flush() operations. These operations and other infrastructure updates allow all persistent memory specific dax functionality to be pushed into libnvdimm and the pmem driver directly. It also allows dax-specific sysfs attributes to be linked to a host device, for example: /sys/block/pmem0/dax/write_cache - Add support for the new NVDIMM platform/firmware mechanisms introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace label format, extensions to the address-range-scrub command set, new error injection commands, and a new BTT (block-translation-table) layout. These updates support inter-OS and pre-OS compatibility. - Fix a longstanding memory corruption bug in nfit_test. - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2) capable. - Miscellaneous fixes and small updates across libnvdimm and the nfit driver. Acknowledgements that came after the branch was pushed: commit 6aa734a2f38e ("libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani <toshi.kani@hpe.com>" * tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits) libnvdimm, namespace: record 'lbasize' for pmem namespaces acpi/nfit: Issue Start ARS to retrieve existing records libnvdimm: New ACPI 6.2 DSM functions acpi, nfit: Show bus_dsm_mask in sysfs libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru. acpi, nfit: Enable DSM pass thru for root functions. libnvdimm: passthru functions clear to send libnvdimm, btt: convert some info messages to warn/err libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime libnvdimm: fix the clear-error check in nsio_rw_bytes libnvdimm, btt: fix btt_rw_page not returning errors acpi, nfit: quiet invalid block-aperture-region warnings libnvdimm, btt: BTT updates for UEFI 2.7 format acpi, nfit: constify *_attribute_group libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region libnvdimm, pmem, dax: export a cache control attribute dax: convert to bitmask for flags dax: remove default copy_from_iter fallback libnvdimm, nfit: enable support for volatile ranges libnvdimm, pmem: fix persistence warning ...
2017-07-07arcnet: com20020-pci: Fix an error handling path in 'com20020pci_probe()'Christophe Jaillet1-2/+4
If this memory allocation fails, we should go through the error handling path as done everywhere else in this function before returning. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-07nfp: flower: add missing clean up call to avoid memory leaksJakub Kicinski1-0/+1
nfp_flower_metadata_cleanup() is defined but never invoked, not calling it will cause us to leak mask and statistics queue memory on the host. Fixes: 43f84b72c50d ("nfp: add metadata to each flow offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds4-88/+73
Merge misc updates from Andrew Morton: - a few hotfixes - various misc updates - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (108 commits) mm, memory_hotplug: move movable_node to the hotplug proper mm, memory_hotplug: drop CONFIG_MOVABLE_NODE mm, memory_hotplug: drop artificial restriction on online/offline mm: memcontrol: account slab stats per lruvec mm: memcontrol: per-lruvec stats infrastructure mm: memcontrol: use generic mod_memcg_page_state for kmem pages mm: memcontrol: use the node-native slab memory counters mm: vmstat: move slab statistics from zone to node counters mm/zswap.c: delete an error message for a failed memory allocation in zswap_dstmem_prepare() mm/zswap.c: improve a size determination in zswap_frontswap_init() mm/zswap.c: delete an error message for a failed memory allocation in zswap_pool_create() mm/swapfile.c: sort swap entries before free mm/oom_kill: count global and memory cgroup oom kills mm: per-cgroup memory reclaim stats mm: kmemleak: treat vm_struct as alternative reference to vmalloc'ed objects mm: kmemleak: factor object reference updating out of scan_block() mm: kmemleak: slightly reduce the size of some structures on 64-bit architectures mm, mempolicy: don't check cpuset seqlock where it doesn't matter mm, cpuset: always use seqlock when changing task's nodemask mm, mempolicy: simplify rebinding mempolicies when updating cpusets ...
2017-07-06Merge branch 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-6/+1
Pull user access str* updates from Al Viro: "uaccess str...() dead code removal" * 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: s390 keyboard.c: don't open-code strndup_user() mips: get rid of unused __strnlen_user() get rid of unused __strncpy_from_user() instances kill strlen_user()
2017-07-06Merge branch 'work.probe_kernel_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds3-25/+4
Pull probe_kernel_read() uses from Al Viro: "Several open-coded probe_kernel_read()..." * 'work.probe_kernel_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: dio: use probe_kernel_read() hp_sdc: use probe_kernel_read() hpfb: use probe_kernel_read()
2017-07-06Merge branch 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds4-225/+503
Pull misc compat stuff updates from Al Viro: "This part is basically untangling various compat stuff. Compat syscalls moved to their native counterparts, getting rid of quite a bit of double-copying and/or set_fs() uses. A lot of field-by-field copyin/copyout killed off. - kernel/compat.c is much closer to containing just the copyin/copyout of compat structs. Not all compat syscalls are gone from it yet, but it's getting there. - ipc/compat_mq.c killed off completely. - block/compat_ioctl.c cleaned up; floppy compat ioctls moved to drivers/block/floppy.c where they belong. Yes, there are several drivers that implement some of the same ioctls. Some are m68k and one is 32bit-only pmac. drivers/block/floppy.c is the only one in that bunch that can be built on biarch" * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mqueue: move compat syscalls to native ones usbdevfs: get rid of field-by-field copyin compat_hdio_ioctl: get rid of set_fs() take floppy compat ioctls to sodding floppy.c ipmi: get rid of field-by-field __get_user() ipmi: get COMPAT_IPMICTL_RECEIVE_MSG in sync with the native one rt_sigtimedwait(): move compat to native select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap() put_compat_rusage(): switch to copy_to_user() sigpending(): move compat to native getrlimit()/setrlimit(): move compat to native times(2): move compat to native compat_{get,put}_bitmap(): use unsafe_{get,put}_user() fb_get_fscreeninfo(): don't bother with do_fb_ioctl() do_sigaltstack(): lift copying to/from userland into callers take compat_sys_old_getrlimit() to native syscall trim __ARCH_WANT_SYS_OLD_GETRLIMIT
2017-07-06Merge branch 'work.drm' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds11-1045/+475
Pull DRM compat ioctl handling updates from Al Viro: "This kills the double-copies in there and tons of field-by-field copyin/copyout. Several dead ioctls put to rest, while we are at it - the native counterparts had been gone for a decade, so we can bloody well fail early on the compat side. No point rearranging the 32bit structure into 64bit one (and back) only to be told "piss off, I don't know that ioctl" by the native code..." * 'work.drm' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (29 commits) Fix trivial misannotations mga: switch compat ioctls to drm_ioctl_kernel() radeon: take out dead compat ioctls drm compat: ia64 is not biarch drm_compat_ioctl(): tidy up a bit switch compat_drm_mapbufs() to drm_ioctl_kernel() switch compat_drm_rmmap() to drm_ioctl_kernel() switch compat_drm_mode_addfb2() to drm_ioctl_kernel() switch compat_drm_wait_vblank() to drm_ioctl_kernel() switch compat_drm_update_draw() compat_drm: switch sg ioctls compat_drm: switch AGP compat ioctls to drm_ioctl_kernel() switch compat_drm_dma() to drm_ioctl_kernel() switch compat_drm_resctx() to drm_ioctl_kernel() switch compat_drm_getsareactx() to drm_ioctl_kernel() switch compat_drm_setsareactx() to drm_ioctl_kernel() switch compat_drm_freebufs() to drm_ioctl_kernel() switch compat_drm_markbufs() to drm_ioctl_kernel() switch compat_drm_addmap() to drm_ioctl_kernel() switch compat_drm_getstats() to drm_ioctl_kernel() ...
2017-07-06Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds16-256/+280
Pull dma-mapping infrastructure from Christoph Hellwig: "This is the first pull request for the new dma-mapping subsystem In this new subsystem we'll try to properly maintain all the generic code related to dma-mapping, and will further consolidate arch code into common helpers. This pull request contains: - removal of the DMA_ERROR_CODE macro, replacing it with calls to ->mapping_error so that the dma_map_ops instances are more self contained and can be shared across architectures (me) - removal of the ->set_dma_mask method, which duplicates the ->dma_capable one in terms of functionality, but requires more duplicate code. - various updates for the coherent dma pool and related arm code (Vladimir) - various smaller cleanups (me)" * tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits) ARM: dma-mapping: Remove traces of NOMMU code ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus ARM: NOMMU: Introduce dma operations for noMMU drivers: dma-mapping: allow dma_common_mmap() for NOMMU drivers: dma-coherent: Introduce default DMA pool drivers: dma-coherent: Account dma_pfn_offset when used with device tree dma: Take into account dma_pfn_offset dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs dma-mapping: remove dmam_free_noncoherent crypto: qat - avoid an uninitialized variable warning au1100fb: remove a bogus dma_free_nonconsistent call MAINTAINERS: add entry for dma mapping helpers powerpc: merge __dma_set_mask into dma_set_mask dma-mapping: remove the set_dma_mask method powerpc/cell: use the dma_supported method for ops switching powerpc/cell: clean up fixed mapping dma_ops initialization tile: remove dma_supported and mapping_error methods xen-swiotlb: remove xen_swiotlb_set_dma_mask arm: implement ->dma_supported instead of ->set_dma_mask mips/loongson64: implement ->dma_supported instead of ->set_dma_mask ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.