aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2006-06-20Merge git://git.infradead.org/mtd-2.6Linus Torvalds69-4904/+6385
* git://git.infradead.org/mtd-2.6: (199 commits) [MTD] NAND: Fix breakage all over the place [PATCH] NAND: fix remaining OOB length calculation [MTD] NAND Fixup NDFC merge brokeness [MTD NAND] S3C2410 driver cleanup [MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation. [JFFS2] Check CRC32 on dirent and data nodes each time they're read [JFFS2] When retiring nextblock, allocate a node_ref for the wasted space [JFFS2] Mark XATTR support as experimental, for now [JFFS2] Don't trust node headers before the CRC is checked. [MTD] Restore MTD_ROM and MTD_RAM types [MTD] assume mtd->writesize is 1 for NOR flashes [MTD NAND] Fix s3c2410 NAND driver so it at least _looks_ like it compiles [MTD] Prepare physmap for 64-bit-resources [JFFS2] Fix more breakage caused by janitorial meddling. [JFFS2] Remove stray __exit from jffs2_compressors_exit() [MTD] Allow alternate JFFS2 mount variant for root filesystem. [MTD] Disconnect struct mtd_info from ABI [MTD] replace MTD_RAM with MTD_GENERIC_TYPE [MTD] replace MTD_ROM with MTD_GENERIC_TYPE [MTD] remove a forgotten MTD_XIP ...
2006-06-20Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds1-1/+1
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] PARPORT_SERIAL should depend on SERIAL_8250_PCI
2006-06-20Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds1-1/+1
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Add (MMC) to entry in MAINTAINERS file [MMC] sdhci truncated pointer fix
2006-06-20Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds4-21/+101
* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits) [ARM] 3559/1: S3C2442: core and serial port [ARM] 3557/1: S3C24XX: centralise and cleanup uart registration [ARM] 3558/1: SMDK24XX: LED platform devices [ARM] 3534/1: add spi support to lubbock platform [ARM] 3554/1: ARM: Fix dyntick locking [ARM] 3553/1: S3C24XX: earlier print of cpu idcode info [ARM] 3552/1: S3C24XX: Move VA of GPIO for low-level debug [ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGH [ARM] 3550/1: OSIRIS: fix serial port map for 1:1 [ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.S [ARM] 3335/1: Old-abi Thumb sys_syscall broken [ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfig [ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip support [ARM] 3465/1: [1/3] Support for Philips PNX4008 platform: headers [ARM] 3407/1: lpd7x: documetation update [ARM] 3406/1: lpd7x: compilation fix for smc91x [ARM] 3405/1: lpd7a40x: CPLD ssp driver [ARM] 3404/1: lpd7a40x: AMBA CLCD support [ARM] 3403/1: lpd7a40x: updated default configurations [ARM] 3402/1: lpd7a40x: serial driver bug fix ...
2006-06-20[MTD] NAND: Fix breakage all over the placeThomas Gleixner3-87/+220
Following problems are addressed: - wrong status caused early break out of nand_wait() - removed the bogus status check in nand_wait() which is a relict of the abandoned support for interrupted erase. - status check moved to the correct place in read_oob - oob support for syndrom based ecc with strange layouts - use given offset in the AUTOOOB based oob operations Partially based on a patch from Vitaly Vool <vwool@ru.mvista.com> Thanks to Savin Zlobec <savin@epico.si> for tracking down the status problem. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-20[PATCH] NAND: fix remaining OOB length calculationVitaly Wool1-2/+2
In nand_read_page_syndrome/nand_write_page_syndrome the calculation of the remaining oob length which is not used by the prepad/ecc/postpad areas is wrong. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-20[MTD] NAND Fixup NDFC merge brokenessThomas Gleixner1-9/+4
Remove the remains of a broken merge. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-19Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds1-8/+0
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (51 commits) [MIPS] Make timer interrupt frequency configurable from kconfig. [MIPS] Correct HAL2 Kconfig description [MIPS] Fix R4K cache macro names [MIPS] Add Missing R4K Cache Macros to IP27 & IP32 [MIPS] Support for the RM9000-based Basler eXcite smart camera platform. [MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board [MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors. [MIPS] SN: include asm/sn/types.h for nasid_t. [MIPS] Random fixes for sb1250 [MIPS] Fix bcm1480 compile [MIPS] Remove support for NEC DDB5476. [MIPS] Remove support for NEC DDB5074. [MIPS] Cleanup memory managment initialization. [MIPS] SN: Declare bridge_pci_ops. [MIPS] Remove unused function alloc_pci_controller. [MIPS] IP27: Extract pci_ops into separate file. [MIPS] IP27: Use symbolic constants instead of magic numbers. [MIPS] vr41xx: remove unnecessay items from vr41xx/Kconfig. [MIPS] IP27: Cleanup N/M mode configuration. [MIPS] IP27: Throw away old unused hacks. ...
2006-06-19Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds33-958/+3889
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (46 commits) IB/uverbs: Don't serialize with ib_uverbs_idr_mutex IB/mthca: Make all device methods truly reentrant IB/mthca: Fix memory leak on modify_qp error paths IB/uverbs: Factor out common idr code IB/uverbs: Don't decrement usecnt on error paths IB/uverbs: Release lock on error path IB/cm: Use address handle helpers IB/sa: Add ib_init_ah_from_path() IB: Add ib_init_ah_from_wc() IB/ucm: Get rid of duplicate P_Key parameter IB/srp: Factor out common request reset code IB/srp: Support SRP rev. 10 targets [SCSI] srp.h: Add I/O Class values IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool. IB/mthca: Fill in max_map_per_fmr device attribute IB/ipath: Add client reregister event generation IB/mthca: Add client reregister event generation IB: Move struct port_info from ipath to <rdma/ib_smi.h> IPoIB: Handle client reregister events IB: Add client reregister event type ...
2006-06-19Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds41-3771/+5585
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (109 commits) [ETHTOOL]: Fix UFO typo [SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer. [SCTP]: Send only 1 window update SACK per message. [SCTP]: Don't do CRC32C checksum over loopback. [SCTP] Reset rtt_in_progress for the chunk when processing its sack. [SCTP]: Reject sctp packets with broadcast addresses. [SCTP]: Limit association max_retrans setting in setsockopt. [PFKEYV2]: Fix inconsistent typing in struct sadb_x_kmprivate. [IPV6]: Sum real space for RTAs. [IRDA]: Use put_unaligned() in irlmp_do_discovery(). [BRIDGE]: Add support for NETIF_F_HW_CSUM devices [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUM [TG3]: Convert to non-LLTX [TG3]: Remove unnecessary tx_lock [TCP]: Add tcp_slow_start_after_idle sysctl. [BNX2]: Update version and reldate [BNX2]: Use CPU native page size [BNX2]: Use compressed firmware [BNX2]: Add firmware decompression [BNX2]: Allow WoL settings on new 5708 chips ... Manual fixup for conflict in drivers/net/tulip/winbond-840.c
2006-06-19Merge branch 'i915fb' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6Linus Torvalds5-210/+412
* 'i915fb' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6: (25 commits) intelfb: fixup clock calculation debugging. Removed hard coded EDID buffer size. intelfb: use regular modedb table instead of VESA intelfb: use firmware EDID for mode database Revert "intelfb driver -- use the regular modedb table instead of the VESA" intelfb: int option fix sync modesetting code with X.org intelfb: align with changes from my X driver. intelfb driver -- use the regular modedb table instead of the VESA Adds support for 256MB aperture on 945 chipsets to the intelfb driver intelfb -- uses stride alignment of 64 on the 9xx chipsets. intelfb: some cleanups for intelfbhw intelfb: fixup pitch calculation like X does intelfb: fixup p calculation This patch makes a needlessly global struct static. intelfb: add i945GM support intelfb: fixup whitespace.. intelfb: add hw cursor support for i9xx intelfb: make i915 modeset intelfb: add support for i945G ...
2006-06-19Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds4-14/+11
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] alpha-agp warning fix [AGPGART] uninorth-agp warning fixes [AGPGART] Remove pointless initialisation in intel-agp [AGPGART] Remove pointless code from agp_generic_create_gatt_table()
2006-06-19Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds3-13/+17
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] sets nforce2 minimum PLL divider to 2. [CPUFREQ] Make powernow-k7 work on SMP kernels. [CPUFREQ] cpufreq core {d,}printk adjustments [CPUFREQ] dprintk adjustments to cpufreq-speedstep-centrino [CPUFREQ] dprintk adjustments to cpufreq-nforce2 [CPUFREQ] Prepare powernow-k8 for future CPUs. [CPUFREQ] Make acpi-cpufreq 'sticky'. [CPUFREQ] Remove strange No-op from longrun.c [CPUFREQ] Remove more freq_table reinitialisations. [CPUFREQ] Fix another redundant initialisation in freq_table [CPUFREQ] Remove duplicate assignment in freq_table [CPUFREQ] CodingStyle nits in cpufreq_stats.c [CPUFREQ] Remove duplicate assignment from cpufreq-nforce2 [CPUFREQ] Remove pointless reinitialisations in acpi-cpufreq [CPUFREQ] Remove pointless reinitialisation from powernow-k8 [CPUFREQ] Remove redundant initialisation from longhaul. [CPUFREQ] Clean up longhaul's speed pretty-printer [CPUFREQ] Disambiguate loop indexes in powernow-k7 [CPUFREQ] Typo in powernow-k8
2006-06-19Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6Linus Torvalds113-5977/+12912
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (166 commits) [PATCH] net: au1000_eth: PHY framework conversion [PATCH] 3c5zz ethernet: fix section warnings [PATCH] smc ethernet: fix section mismatch warnings [PATCH] hp ethernet: fix section mismatches [PATCH] Section mismatch in drivers/net/ne.o during modpost [PATCH] e1000: prevent statistics from getting garbled during reset [PATCH] smc911x Kconfig fix [PATCH] forcedeth: new device ids [PATCH] forcedeth config: version [PATCH] forcedeth config: module parameters [PATCH] forcedeth config: diagnostics [PATCH] forcedeth config: move functions [PATCH] forcedeth config: statistics [PATCH] forcedeth config: csum [PATCH] forcedeth config: wol [PATCH] forcedeth config: phy [PATCH] forcedeth config: flow control [PATCH] forcedeth config: ring sizes [PATCH] forcedeth config: tso cleanup [DOC] Update bonding documentation with sysfs info ...
2006-06-19Make sure to re-enable SCI after an ACPI suspendLinus Torvalds1-0/+3
According to the ACPI spec, it should be enabled on return from suspend, but bugs happen. Apparently especially on the Apple Intel Macs. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-19Improve SATA core suspend/resumeLinus Torvalds1-0/+1
Doing a full ata_busy_sleep() seems to get suspend and resume working fine on the Apple Mac Mini, at least. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-19[MIPS] Remove support for NEC DDB5476.Ralf Baechle1-8/+0
As warned several times before. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19[MTD NAND] S3C2410 driver cleanupBen Dooks1-8/+3
Fix unused variables and commenting since tglx's new NAND updates Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-19[MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation.Ben Dooks2-5/+81
Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-18[ARM] 3559/1: S3C2442: core and serial portBen Dooks1-1/+1
Patch from Ben Dooks Core support for the Samsung S3C2442, and the serial port driver update to allow the serial port blocks to be used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3406/1: lpd7x: compilation fix for smc91xMarc Singer1-16/+28
Patch from Marc Singer Reworking of the adaptation macros to allow driver to compile again for the lpd7x's. Also, support added for the lh79520 so it may use the smc91x. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3404/1: lpd7a40x: AMBA CLCD supportMarc Singer1-0/+63
Patch from Marc Singer Board support and LCD panel configurations to integrate lh7a40x's with the amba clcd driver. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3402/1: lpd7a40x: serial driver bug fixMarc Singer1-4/+9
Patch from Marc Singer The serial driver now sets up the third UART when it is to be used. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[SERIAL] PARPORT_SERIAL should depend on SERIAL_8250_PCIRussell King1-1/+1
Since parport_serial uses symbols from 8250_pci, there should be a dependency between the configuration symbols for these two modules. Problem reported by Andrey Borzenkov Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18intelfb: fixup clock calculation debugging.Dave Airlie1-72/+32
The debugging code for pll clocks was wrong and causing div by 0. Signed-off-by: Dave Airlie <airlied@linux.ie>
2006-06-18Merge branch 'master' into upstreamJeff Garzik2-3/+10
2006-06-17[NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUMHerbert Xu1-5/+2
The current stack treats NETIF_F_HW_CSUM and NETIF_F_NO_CSUM identically so we test for them in quite a few places. For the sake of brevity, I'm adding the macro NETIF_F_GEN_CSUM for these two. We also test the disjunct of NETIF_F_IP_CSUM and the other two in various places, for that purpose I've added NETIF_F_ALL_CSUM. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[TG3]: Convert to non-LLTXMichael Chan2-20/+23
Herbert Xu pointed out that it is unsafe to call netif_tx_disable() from LLTX drivers because it uses dev->xmit_lock to synchronize whereas LLTX drivers use private locks. Convert tg3 to non-LLTX to fix this issue. tg3 is a lockless driver where hard_start_xmit and tx completion handling can run concurrently under normal conditions. A tx_lock is only needed to prevent netif_stop_queue and netif_wake_queue race condtions when the queue is full. So whether we use LLTX or non-LLTX, it makes practically no difference. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[TG3]: Remove unnecessary tx_lockMichael Chan1-4/+0
Remove tx_lock where it is unnecessary. tg3 runs lockless and so it requires interrupts to be disabled and sync'ed, netif_queue and NAPI poll to be stopped before the device can be reconfigured. After stopping everything, it is no longer necessary to get the tx_lock. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Update version and reldateMichael Chan1-2/+2
Update driver version to 1.4.42. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Use CPU native page sizeMichael Chan2-2/+8
Use CPU native page size to determine various ring sizes. This allows order-0 memory allocations on all systems. Added check to limit the page size to 16K since that's the maximum rx ring size that will be used. This will prevent using unnecessarily large page sizes on some architectures with large page sizes. [Suggested by David Miller] Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Use compressed firmwareMichael Chan1-3392/+1864
Change bnx2_fw.h to use compressed text for all CPU images. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Add firmware decompressionMichael Chan3-12/+152
Add functions to decompress firmware before loading to the internal CPUs. Compressing the firmware reduces the driver size significantly. Added file name length sanity check in the gzip header to prevent going past the end of buffer [suggested by DaveM]. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Allow WoL settings on new 5708 chipsMichael Chan1-1/+3
Allow WOL settings on 5708 B2 and newer chips that have the problem fixed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Add an rx drop counterMichael Chan2-3/+14
Add a counter for packets dropped by firmware. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[BNX2]: Endian fixes.Alexey Dobriyan1-2/+2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[IRDA]: irda-usb.c: STIR421x cleanupsNick Fedchik2-192/+145
This cleans the STIR421x part of the irda-usb code. We also no longer try to load all existing firmwares but only the matching one (according to the USB id we get from the dongle). Signed-off-by: Nick Fedchik <nfedchik@atlantic-link.com.ua> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[NET] ppp: Remove unnecessary pskb_may_pullHerbert Xu1-2/+0
In ppp_receive_nonmp_frame, we call pskb_may_pull(skb, skb->len) if the tailroom is >= 124. This is pointless because this pskb_may_pull is only needed if the skb is non-linear. However, if it is non-linear then the tailroom would be zero. So it can be safely removed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[NET]: Clean up skb_linearizeHerbert Xu3-6/+9
The linearisation operation doesn't need to be super-optimised. So we can replace __skb_linearize with __pskb_pull_tail which does the same thing but is more general. Also, most users of skb_linearize end up testing whether the skb is linear or not so it helps to make skb_linearize do just that. Some callers of skb_linearize also use it to copy cloned data, so it's useful to have a new function skb_linearize_cow to copy the data if it's either non-linear or cloned. Last but not least, I've removed the gfp argument since nobody uses it anymore. If it's ever needed we can easily add it back. Misc bugs fixed by this patch: * via-velocity error handling (also, no SG => no frags) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[NET]: Add netif_tx_lockHerbert Xu12-38/+41
Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[CONNECTOR]: Fix warning in cn_queue.cAndreas Schwab1-1/+1
cn_queue.c:130: warning: value computed is not used There is no point in testing the atomic value if the result is thrown away. From Evgeniy: It was created to put implicit smp barrier, but it is not needed there. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[TG3]: update version and reldateMichael Chan1-2/+2
Update version to 3.60. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[TG3]: Add recovery logic when MMIOs are re-orderedMichael Chan2-9/+49
Add recovery logic when we suspect that the system is re-ordering MMIOs. Re-ordered MMIOs to the send mailbox can cause bogus tx completions and hit BUG_ON() in the tx completion path. tg3 already has logic to handle re-ordered MMIOs by flushing the MMIOs that must be strictly ordered (such as the send mailbox). Determining when to enable the flush is currently a manual process of adding known chipsets to a list. The new code replaces the BUG_ON() in the tx completion path with the call to tg3_tx_recover(). It will set the TG3_FLAG_MBOX_WRITE_REORDER flag and reset the chip later in the workqueue to recover and start flushing MMIOs to the mailbox. A message to report the problem will be printed. We will then decide whether or not to add the host bridge to the list of chipsets that do re-ordering. We may add some additional code later to print the host bridge's ID so that the user can report it more easily. The assumption that re-ordering can only happen on x86 systems is also removed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[TG3]: Add 5786 PCI IDMichael Chan1-0/+2
Add PCI ID for BCM5786 which is a variant of 5787. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[IRDA]: ali-ircc: using device model power managementSamuel Ortiz1-55/+51
This patch gets rid of the old power management code and now uses the device model for the ali-ircc driver. Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[IRDA]: stir4200, switching to the kthread APIChristoph Hellwig1-24/+14
stir4200 uses a kernel thread for its TX/RX operations, and it is now converted to the kernel kthread API. Tested on an STIR4200 based dongle. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[IRDA]: Initial support for MCS7780 based donglesSamuel Ortiz4-0/+1192
The MosChip MCS7780 chipset is an IrDA USB bridge that doesn't conform with the IrDA-USB standard and thus needs its separate driver. Tested on an actual MCS7780 based dongle. Original implementation by Brian Pugh <bpugh@cs.pdx.edu> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[I/OAT]: Do not use for_each_cpu().Andrew Morton1-3/+3
for_each_cpu() is going away (and is gone in -mm). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[I/OAT]: Utility functions for offloading sk_buff to iovec copiesChris Leech2-1/+303
Provides for pinning user space pages in memory, copying to iovecs, and copying from sk_buffs including fragmented and chained sk_buffs. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17[I/OAT]: Setup the networking subsystem as a DMA clientChris Leech1-0/+12
Attempts to allocate per-CPU DMA channels Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.