aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-08-25sky2: only bring up watchdog if link is activeStephen Hemminger2-31/+27
This fixes the extra timer overhead that people were whining about as a 2.6.23 regression. Running the watchdog timer all the time is unneeded. Change it to run only if link is up, and reduce frequency to save power. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sky2: clear PCI power control reg at startupStephen Hemminger1-1/+6
Make sure PCI register for PHY power gets cleared on boot, and make sure to avoid any PCI posting problems. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25DM9000: fix interface hang under loadFlorian Westphal1-18/+7
When transferring data at full speed, the DM9000 network interface sometimes stops sending/receiving data. Worse, ksoftirqd consumes 100% cpu and the net tx watchdog never triggers. Fix by spin_lock_irqsave() in dm9000_start_xmit() to prevent the interrupt handler from interfering. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25phy layer: fix genphy_setup_forced (don't reset)Domen Puncer1-1/+1
Writing BMCR_RESET bit will reset MII_BMCR to default values. This is clearly not what we want. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25Don't use GFP_DMA for zone allocation.Ralf Baechle1-1/+1
IP32 doesn't even have a ZONE_DMA so no point in using GFP_DMA in any IP32-specific device driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25fix realtek phy id in forcedethWilly Tarreau1-1/+1
As noticed by Chuck Ebbert, commit c5e3ae8823693b260ce1f217adca8add1bc0b3de introduced a copy-paste typo, as realtek phy is 0x732 and not 0x1c1. Obvious fix below suggested by Ayaz Abdulla. Signed-off-by: Willy Tarreau <w@1wt.eu> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds4-11/+20
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: don't check n_sectors during revalidation if zero pata_via: Add Arima W730-K8 and other rebadgings pata_sis: Add the FSC Amilo and friends pata_pdc2027x: PLL detection fixes libata: fix n_sectors failure handling during revalidation
2007-08-23tty: dont needlessly cast kmalloc() return valueJesper Juhl1-4/+2
kmalloc() hands us a void pointer, we don't need to cast it. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-23Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds2-2/+10
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (6070): Fix a warning at dvb_net V4L/DVB (6042): b2c2-flexcop: fix Airstar HD5000 tuning regression
2007-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds1-7/+25
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: tweak the sched_runtime_limit tunable sched: skip updating rq's next_balance under null SD sched: fix broken SMT/MC optimizations sched: accounting regression since rc1 sched: fix sysctl directory permissions sched: sched_clock_idle_[sleep|wakeup]_event()
2007-08-23Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmcLinus Torvalds4-26/+36
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdhci: tell which spurious interrupt we got sdhci: handle data interrupts during command mmc: ignore bad max block size in sdhci sdhci: be more cautious about block count register drivers/mmc/core/host.c: kmalloc + memset conversion to kzalloc drivers/mmc/core/bus.c: kmalloc + memset conversion to kzalloc
2007-08-23Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds4-21/+16
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: Run k8t_sound_hostbridge quirk only when needed PCI: disable MSI on RX790 PCI: disable MSI on RD580 PCI: disable MSI on RS690 PCI: make pcie_get_readrq visible in pci.h PCI: lets kill the 'PCI hidden behind bridge' message pci/hotplug/cpqphp_ctrl.c: remove stale BKL use PCI: Document pci_iomap() PCI: quirk_e100_interrupt() called too early PCI: Move prototypes for pci_bus_find_capability to include/linux/pci.h
2007-08-23Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds35-172/+255
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (35 commits) usb: add PRODUCT, TYPE to usb-interface events USB: resubmission unusual_devs modification for Nikon D80 usb quirks: Add Canon EOS 5D (PC Connection mode) to the autosuspend blacklist USB: make EHCI initialize properly on PPC SOCs UEAGLE: Remove sysfs files on error case USB: fsl_usb2_udc: fix bug in processing setup requests USB: g_file_storage: fix bug in DMA buffer handling USB: update last_busy field correctly USB: fix DoS in pwc USB video driver USB: allow retry on descriptor fetch errors USB: unkill cxacru atm driver USB: Adding support for HTC Smartphones to ipaq USB: another quirky device USB: quirky mass storage device USB: ohci, fix oddball gcc warning usb-storage: fix bugs in the disconnect pathway usb: typo in usb R8A66597 HCD config USB: accept 1-byte Device Status replies, fixing some b0rken devices USB: blacklist Samsung ML-2010 printer usb-serial: fix oti6858.c segfault in termios handling ...
2007-08-23pata_it821x: Fix regression/corruptorAlan Cox1-1/+1
Whoever did the PCI revision patch slipped up on the it821x, and I didn't spot this at the time either. They moved the check for the errata from the 0x10 revision to 0x11. Put it back This one is important for 2.6.23 final as in some cases bad things will occur if 0x10 revision boards don't get the fixups. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-23lguest should depend on CONFIG_FUTEXAlexey Dobriyan1-1/+1
It uses get_futex_key(). Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-23V4L/DVB (6070): Fix a warning at dvb_netMauro Carvalho Chehab1-2/+3
static function dvb_net_sec declares input arg "pkt" as u8. However, the same argument at dvb_net_sec_callback is defined as "const u8". When calling dvb_net_sec, this is casted as just "u8". gcc 4.2.1 generates a warning about that: CC [M] drivers/media/dvb/dvb-core/dvb_net.o drivers/media/dvb/dvb-core/dvb_net.c: In function "dvb_net_sec_callback": drivers/media/dvb/dvb-core/dvb_net.c:905: warning: passing argument 2 of "dvb_net_sec" discards qualifiers from pointer target type Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-23V4L/DVB (6042): b2c2-flexcop: fix Airstar HD5000 tuning regressionTrent Piepho1-0/+7
Git changeset 6bdcc6e6dbab8daffd05e5026486f34ba41a6c72 dropped the stand-alone lgh06xf module, whose functionality was absorbed into the dvb-pll module. However, there was a minor difference between the code in lgh06xf and dvb-pll, which caused a regression in b2c2-flexcop devices using the LG-H06xF NIM. dvb-pll will probe for the presence of an i2c pll chip by performing a single byte read, the lgh06xf driver did not do this. Unfortunately, the code in flexcop-i2c.c does not currently support 1 byte or 0 byte reads as a probe. Such probes with the current code will always fail. In order to work around this problem, and restore proper functionality of the Airstar HD5000 device, this hack was created to make the probe appear to succeed. The single byte read in dvb_pll_attach is the only place where such a probe would ever occur, so this change is safe, and will not affect any other devices. Of course, if one knew how to actually perform the read operation, it would be better to go that route. In the meantime, however, we must apply this workaround, in order to prevent the regression that causes tuning to fail on the Airstar HD5000 ATSC device. Thanks to Jarod Wilson, who had originally reported this regression, and to Geoffrey Hausheer, whose original workaround patch led us to find the actual cause of the problem. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Cc: Geoffrey Hausheer <inli3epy93n@phracturedblue.com> Acked-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-23sched: sched_clock_idle_[sleep|wakeup]_event()Ingo Molnar1-7/+25
construct a more or less wall-clock time out of sched_clock(), by using ACPI-idle's existing knowledge about how much time we spent idling. This allows the rq clock to work around TSC-stops-in-C2, TSC-gets-corrupted-in-C3 type of problems. ( Besides the scheduler's statistics this also benefits blktrace and printk-timestamps as well. ) Furthermore, the precise before-C2/C3-sleep and after-C2/C3-wakeup callbacks allow the scheduler to get out the most of the period where the CPU has a reliable TSC. This results in slightly more precise task statistics. the ACPI bits were acked by Len. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Len Brown <len.brown@intel.com>
2007-08-23libata: don't check n_sectors during revalidation if zeroTejun Heo1-1/+2
If the initial configuration fails early, n_sectors is left at zero. Checking against it during revalidation makes retried configuration fail due to n_sectors mismatch. Ignore zero n_sectors during revalidation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23pata_via: Add Arima W730-K8 and other rebadgingsAlan Cox1-1/+4
More cable funnies Signed-off-by: Alan Cox <alan@redhat.com> Tested-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23pata_sis: Add the FSC Amilo and friendsAlan Cox1-0/+1
More short cables Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23pata_pdc2027x: PLL detection fixesMikael Pettersson1-9/+9
Previously I reported that the pata_pdc2027x PLL detection changes in kernel 2.6.22 broke the driver on my PowerMac: >pata_pdc2027x: Invalid PLL input clock 1691742kHz, give up! This is followed by a number of errors and speed reduction steps on the affected ports. There are two bugs in pata_pdc2027x's PLL detection code: 1. The PLL counter's start value is read before the chip is put in "test mode". Outside of test mode the counter is halted, and on the PowerMac the counter is zero because the chip hasn't been initialised by its BIOS. The fix is to move the read of the start value to after test mode is started, but before the mdelay() in test mode. This also improves the precision of the PLL detection. 2. The code to compute the number of PLL decrements during the mdelay() in test mode fails to consider that the PLL counter only is 30 bits wide. If there is a wraparound, it will compute an incorrect and much too large value. On the PowerMac, the start count is zero, the end count is a large 30-bit value, so wraparound occurs and an out of bounds PLL clock is detected. The fix is to mask the (start - end) computation to 30 bits. While debugging this I also noticed that pdc_read_counter() reads the two halves of the 30-bit PLL counter as 16-bit values, and then combines them as if the halves only are 15 bits wide. To avoid confusion, the halves should be read as 15-bit values. This patch implements all three changes. It fixes the PLL detection failure on my PowerMac, and doesn't cause any regressions on an x86 with an identical card. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23libata: fix n_sectors failure handling during revalidationTejun Heo1-0/+4
If revalidation fails because device has different n_sectors after configuration the original n_sectors should be restored before failing revalidation. Without this fix, n_sectors difference will incorrectly and silently pass revalidation when revalidation is retried. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-23sdhci: tell which spurious interrupt we gotPierre Ossman1-6/+6
When we get unexpected interrupts, also print which interrupt it was. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23sdhci: handle data interrupts during commandPierre Ossman2-7/+22
It is fully legal for a controller to start issuing data related interrupts before it has signalled that the command has completed. Make sure the driver actually can handle this. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23mmc: ignore bad max block size in sdhciDavid Vrabel1-5/+4
Some SDHC cards report an invalid maximum block size, in these cases assume they support block sizes up to 512 bytes instead of returning an error. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23sdhci: be more cautious about block count registerPierre Ossman1-2/+2
The block count register shouldn't be trusted for single block transfers, so avoid using it completely when calculating transferred bytes. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23drivers/mmc/core/host.c: kmalloc + memset conversion to kzallocMariusz Kozlowski1-3/+1
drivers/mmc/core/host.c | 3509 -> 3457 (-52 bytes) drivers/mmc/core/host.o | 92400 -> 92136 (-264 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23drivers/mmc/core/bus.c: kmalloc + memset conversion to kzallocMariusz Kozlowski1-3/+1
drivers/mmc/core/bus.c | 5663 -> 5619 (-44 bytes) drivers/mmc/core/bus.o | 70899 -> 70731 (-168 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-22au1100fb: move au1100fb_fb_blank() beforce au1100fb_setmode()Yoichi Yuasa1-46/+46
au1100fb_fb_blank() should come before au1100fb_setmode(). drivers/video/au1100fb.c: In function 'au1100fb_setmode': drivers/video/au1100fb.c:211: error: implicit declaration of function 'au1100fb_fb_blank' Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22newport_con warning fixAndrew Morton1-2/+1
drivers/video/console/newport_con.c: In function `newport_console_init': drivers/video/console/newport_con.c:743: warning: return makes integer from pointer without a cast Although one wonders whether that should have been -ENODEV... Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22Check for PPC32 in imsttfbStephen Rothwell1-1/+1
This is the correct fix according to Paul Mackerras and allows an allyesconfig on PPC64 to build. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Mackerras <paulus@samba.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22rtc-max6902 minor fixesDavid Brownell1-3/+3
Minor tweaks to rtc-max6902: make it hotplug correctly, and fix a few space-before-tab whitespace botches. This driver has no current in-tree users, so the hotplug fix changes the driver name. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22cfag12864b fixMiguel Ojeda1-1/+1
This one-liner patch fixes a bug in drivers/auxdisplay/cfag12864b.c At cfag12864b_init(), the driver tries to kalloc some memory in the variable cfag12864b_cache. Then, as usual, it checks if the call failed. However, it checks cfag12864b_buffer instead. This patch changes the "cfag12864b_buffer" to "cfag12864b_cache" so the correct variable is checked. Signed-off-by: Miguel Ojeda <maxextreme@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22serial: add pci ids for PA Semi PWRficient onchip uartsOlof Johansson1-0/+16
Add PCI IDs for the onchip UARTs on PA Semi PWRficient. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22md: correctly update sysfs when a raid1 is reshapedNeilBrown1-4/+18
When a raid1 array is reshaped (number of drives changed), the list of devices is compacted, so that slots for missing devices are filled with working devices from later slots. This requires the "rd%d" symlinks in sysfs to be updated. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22md: make sure a re-add after a restart honours bitmap when resyncingNeilBrown1-1/+2
Commit 1757128438d41670ded8bc3bc735325cc07dc8f9 was slightly bad. If an array has a write-intent bitmap, and you remove a drive, then readd it, only the changed parts should be resynced. However after the above commit, this only works if the array has not been shut down and restarted. This is because it sets 'fullsync' at little more often than it should. This patch is more careful. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22w1: fix w1_remove_master_device() searchingEvgeniy Polyakov1-4/+6
In case bus master driver provided bogus value as its private data, search can be incorrect. Problem found by Adrian Bunk. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22synclink_gt fix module referencePaul Fulghum1-0/+4
Get module reference on open() by generic HDLC to prevent module from unloading while interface is active. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22IPMI: fix warning in ipmi_si_intf.cMijo Safradin1-1/+1
trivial change: fix warning Signed-off-by: Mijo Safradin <safradin@de.ibm.com> Acked-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22Introduce CONFIG_CHECK_SIGNATUREGeert Uytterhoeven3-0/+8
Introduce CONFIG_CHECK_SIGNATURE to control inclusion of check_signature() and avoid problems on platforms that don't have readb(). Let the few legacy (ISA || PCI || X86) drivers that need check_signature() select CONFIG_CHECK_SIGNATURE. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visibleGeert Uytterhoeven2-4/+1
m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visible drivers/char/keyboard.c: In function 'kbd_keycode': drivers/char/keyboard.c:1142: error: implicit declaration of function 'mac_hid_mouse_emulate_buttons' The forward declaration of mac_hid_mouse_emulate_buttons() is not visible on m68k because it's hidden in the middle of a big #ifdef block. Move it to <linux/kbd_kern.h>, correct the type of the second parameter, and include <linux/kbd_kern.h> where needed. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22zorro: Make sysfs config attribute read-onlyGeert Uytterhoeven1-1/+1
zorro: Make the sysfs `config' attribute read-only, as you cannot write to it (there's no .write function neither). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22m68k: Fix a few hickups in drivers/scsi/KconfigGeert Uytterhoeven1-2/+2
m68k: Fix a few hickups in drivers/scsi/Kconfig Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22remove dead code in via-pmu68kJohannes Berg1-240/+0
When suspend is ever implemented for pmu68k it really should follow the generic pm_ops concept and not mirror the platform-specific /dev/pmu device with ioctls on it. Hence, this patch removes the unused code there; should the implementers need it they can look at via-pmu.c and/or the history of the file. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22correct name for rtc-m41t80David Brownell1-1/+1
The new rtc-m41t80 driver name doesn't match its module name, which prevents it from properly hotplugging. Since it's new, no platforms yet depend on that name ... so this patch fixes the driver name to match its module name, rather than going the other way around with a MODULE_ALIAS(). NOTE: This sort of bug is a new thing to watch out for with new-style I2C drivers; previously I2C couldn't hotplug. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22Add blacklisting capability to serial_pci to avoid misdetection of serial portsChristian Schmidt1-0/+17
The serial_pci driver tries to guess serial ports on unknown devices based on the PCI class (modem or serial). On certain softmodems (AC'97 modems) this can lead to the recognition of non-existing serial ports. This patch adds a blacklist of PCI IDs that are to be ignored by the driver. [akpm@linux-foundation.org: cleanups] Signed-off-by: Christian Schmidt <schmidt@digadd.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: Yinghai Lu <yinghai.lu@sun.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22Serial 8250: handle saving the clear-on-read bits from the LSR and MSRCorey Minyard1-29/+56
Reading the LSR clears the break, parity, frame error, and overrun bits in the 8250 chip, but these are not being saved in all places that read the LSR. Same goes for the MSR delta bits. Save the LSR bits off whenever the lsr is read so they can be handled later in the receive routine. Save the MSR bits to be handled in the modem status routine. Also, clear the stored bits and clear the interrupt registers before enabling interrupts, to avoid handling old values of the stored bits in the interrupt routines. [akpm@linux-foundation.org: clean up pre-existing code] Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: Yinghai Lu <yinghai.lu@sun.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22serial_txx9: Fix modem control line handlingAtsushi Nemoto1-3/+11
This chip does not have modem control lines. Return TIOCM_CAR and TIOCM_DSR always on get_mctrl() and ajust some bits in termios cflag. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22serial: add support for ITE 887x chipsNiels de Vos1-0/+159
Add support for the it887x-chips (PCI) manufactured by ITE. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.