aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-15net: ethernet: ti: cpmac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-21/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. There was a check on CAP_NET_ADMIN in cpmac_set_settings, but this check is already done in dev_ethtool, so no need to repeat it before calling the generic function. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: ti: cpmac: use phydev from struct net_devicePhilippe Reynes1-26/+20
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: amd: au1000_eth: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-21/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. There was a check on CAP_NET_ADMIN in au1000_set_settings, but this check is already done in dev_ethtool, so no need to repeat it before calling the generic function. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: amd: au1000_eth: use phydev from struct net_devicePhilippe Reynes2-25/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: smsc9420: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-22/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: smsc9420: use phydev from struct net_devicePhilippe Reynes1-27/+17
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: ethoc: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-22/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: ethoc: use phydev from struct net_devicePhilippe Reynes1-13/+7
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Reviewed-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: pasemi_mac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-26/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: pasemi_mac: use phydev from struct net_devicePhilippe Reynes3-20/+15
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: xilinx: axienet: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-45/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: xilinx: axienet: use phydev from struct net_devicePhilippe Reynes2-21/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: tc35815: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-16/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: ethernet: tc35815: use phydev from struct net_devicePhilippe Reynes1-27/+18
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15macvtap: switch to use skb arrayJason Wang1-11/+71
This patch switch to use skb array instead of sk_receive_queue to avoid spinlock contentions. Tests shows about 21% improvements for guest rx pps: Before: 1472731 pkts/s After: 1786289 pkts/s Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15macvtap: avoid hash calculating for single queueJason Wang1-0/+4
We decide the rxq through calculating its hash which is not necessary if we only have one rx queue. So this patch skip this and just return queue 0. Test shows 22% improving on guest rx pps. Before: 1201504 pkts/s After: 1472731 pkts/s Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15net: phy: micrel: Add KSZ8041FTL fiber mode supportPhilipp Zabel1-2/+32
We can't detect the FXEN (fiber mode) bootstrap pin, so configure it via a boolean device tree property "micrel,fiber-mode". If it is enabled, auto-negotiation is not supported. The only available modes are 100base-fx (full duplex and half duplex). Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15wan/fsl_ucc_hdlc: info leak in uhdlc_ioctl()Dan Carpenter1-2/+1
There is a 2 byte struct whole after line.loopback so we need to clear that out to avoid disclosing stack information. Fixes: c19b6d246a35 ('drivers/net: support hdlc function for QE-UCC') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14mlxsw: spectrum_router: Return -ENOENT in case of errorChristophe Jaillet1-1/+1
'vr' should be a valid pointer here, so returning 'PTR_ERR(vr)' is wrong. Return an explicit error code (-ENOENT) instead. Fixes: 61c503f976 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net: ethernet: ll_temac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-12/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net: ethernet: ll_temac: use phydev from struct net_devicePhilippe Reynes2-22/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14Merge tag 'wireless-drivers-next-for-davem-2016-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-nextDavid S. Miller161-1962/+3670
Kalle Valo says: ==================== wireless-drivers-next patches for 4.8 Major changes: iwlwifi * more work on the RX path for the 9000 device series * some more dynamic queue allocation work * SAR BIOS implementation * some work on debugging capabilities * added support for GCMP encryption * data path rework in preparation for new HW * some cleanup to remove transport dependency on mac80211 * support for MSIx in preparation for new HW * lots of work in preparation for HW support (9000 and a000 series) mwifiex * implement get_tx_power and get_antenna cfg80211 operation callbacks wl18xx * add support for 64bit clock rtl8xxxu * aggregation support (optional for now) Also wireless-drivers is merged to fix some conflicts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Add TC offload support for the VF representors netdeviceOr Gerlitz1-1/+34
The VF representors support only TC filter/action offloads (not mqprio) and this is enabled for them by default. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Add TC HW support for FDB (SRIOV e-switch) offloadsOr Gerlitz2-6/+34
Enhance the TC offload code such that when the eswitch exists and it's mode being SRIOV offloads, we do TC actions parsing and setup targeted for eswitch. Next, we add the offloaded flow to the HW e-switch (fdb). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloadsOr Gerlitz1-0/+53
Add the setup code that parses the TC actions needed to support offloading drop and mirred/redirect for SRIOV e-switch. We can redirect between two devices if they belong to the same HW switch, compare the switchdev HW ID attribute to enforce that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Adjustments in the TC offload code towards reuse for SRIOVOr Gerlitz1-16/+16
Towards reusing the TC offloads code for an SRIOV use-case, change some of the helper functions to have _nic in their names so it's clear what's NIC unique and what's general. Also group together the NIC related helpers so we can easily branch per the use-case in downstream patch. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5: E-Switch, Add API to configure rules for the offloaded modeOr Gerlitz2-0/+49
This allows for upper levels in the driver, e.g the TC offload code to add e-switch offloaded steering rules. The caller provides the rule spec for matching, action, source and destination vports. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5: E-Switch, Use two priorities for SRIOV offloads modeOr Gerlitz3-15/+42
In the offloads mode, some slow path rules are added by the driver (e.g send-to-vport), while offloaded rules are to be added from upper layers. The slow path rules have lower priority and we don't want matching on offloaded rules to suffer from extra steering hops related to the slow path rules. We use two priorities, one for offloaded rules (fast path), and one for the control rules (slow path). To allow for that, we enable two priorities for the FDB namespace in the FS core code. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5e: Offload TC flow counters only when supportedOr Gerlitz1-1/+1
Currenly, the code that programs the flow actions into the firmware doesn't check if was actually asked to offload the statistics, fix that. Fixes: aad7e08d39bd ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5: Introduce bulk reading of flow countersAmir Vadai3-22/+140
This commit utilize the ability of ConnectX-4 to bulk read flow counters. Few bulk counter queries could be done instead of issuing thousands of firmware commands per second to get statistics of all flows set to HW, such as those programmed when we offload tc filters. Counters are stored sorted by hardware id, and queried in blocks (id + number of counters). Due to hardware requirement, start of block and number of counters in a block must be four aligned. Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Amir Vadai <amir@vadai.me> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net/mlx5: Store counters in rbtree instead of listAmir Vadai2-10/+55
In order to use bulk counters, we need to have counters sorted by id. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-13net: nps_enet: code reuseElad Kanfi1-10/+11
Add inline function that checks if there is a pending tx packet. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-13net: nps_enet: fix coding style issuesElad Kanfi1-3/+3
Fix following coding style problems : ERROR: else should follow close brace '}' + } + else { /* !dst_is_aligned */ WARNING: Missing a blank line after declarations + u32 buf = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); + put_unaligned_be32(buf, reg); WARNING: Missing a blank line after declarations + u32 buf; + ioread32_rep(priv->regs_base + NPS_ENET_REG_RX_BUF, &buf, 1); CHECK: Blank lines aren't necessary before a close brace '}' + + } total: 1 errors, 2 warnings, 1 checks, 683 lines checked Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-13net: ethernet: bgmac: Remove redundant dev_err call in bgmac_probe()Wei Yongjun1-6/+2
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-13stmmac: dwmac-socfpga: remove redundant dev_err call in socfpga_dwmac_parse_data()Wei Yongjun1-14/+3
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-13Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-nextDavid S. Miller11-44/+46
Johan Hedberg says: ==================== pull request: bluetooth-next 2016-07-13 Here's our main bluetooth-next pull request for the 4.8 kernel: - Fixes and cleanups in 802.15.4 and 6LoWPAN code - Fix out of bounds issue in btmrvl driver - Fixes to Bluetooth socket recvmsg return values - Use crypto_cipher_encrypt_one() instead of crypto_skcipher - Cleanup of Bluetooth connection sysfs interface - New Authentication failure reson code for Disconnected mgmt event - New USB IDs for Atheros, Qualcomm and Intel Bluetooth controllers Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12mlxsw: core: Trace EMAD messagesJiri Pirko1-5/+13
Trace EMAD messages going down to HW and up from HW. Devlink needs to be registered before EMAD init so the trace function can be called with valid devlink handle. Signed-off-by: Jiri Pirko <jiri@mellanox.com> v1->v2: - Use trace_devlink_hwmsg directly Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12dwc_eth_qos: fix missing clk_disable_unprepare() on error in dwceqos_probe()Wei Yongjun1-1/+1
Fix missing clk_disable_unprepare() call before return from dwceqos_probe() in the error handling case of invalid fixed-link. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12net: mediatek: fix non static symbol warningsWei Yongjun1-3/+3
Fixes the following sparse warnings: drivers/net/ethernet/mediatek/mtk_eth_soc.c:79:5: warning: symbol '_mtk_mdio_write' was not declared. Should it be static? drivers/net/ethernet/mediatek/mtk_eth_soc.c:98:5: warning: symbol '_mtk_mdio_read' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12stmmac: dwmac-socfpga: fix wrong pointer passed to PTR_ERR()Wei Yongjun1-1/+1
PTR_ERR should access the value just tested by IS_ERR, otherwise the wrong error code will be returned. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12iwlwifi: add missing type declarationArnd Bergmann1-0/+1
The iwl-debug.h header relies in implicit inclusion of linux/device.h and we get a lot of warnings without that: drivers/net/wireless/intel/iwlwifi/iwl-debug.h:44:23: error: 'struct device' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] void __iwl_err(struct device *dev, bool rfkill_prefix, bool only_trace, ^~~~~~ In file included from drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.h:66:0, from drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.c:68: drivers/net/wireless/intel/iwlwifi/iwl-trans.h: In function 'iwl_trans_tx': drivers/net/wireless/intel/iwlwifi/iwl-trans.h:1030:348: error: passing argument 1 of '__iwl_err' from incompatible pointer type [-Werror=incompatible-pointer-types] IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); ^ In file included from drivers/net/wireless/intel/iwlwifi/iwl-eeprom-read.c:67:0: drivers/net/wireless/intel/iwlwifi/iwl-debug.h:44:6: note: expected 'struct device *' but argument is of type 'struct device *' void __iwl_err(struct device *dev, bool rfkill_prefix, bool only_trace, ^~~~~~~~~ The easiest workaround is to just declare 'struct device' before its first use, rather than including the entire header file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 21cb3222fe56 ("iwlwifi: decouple PCIe transport from mac80211") Acked-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-12mrf24j40: avoid uninitialized byte in SPI transfer to radio.Walter Mack1-0/+2
isr function issues SPI read command to mrf to obtain INTSTAT. SPI transfer is 2 bytes, but value of 2nd byte is not defined. This had the effect that only the first ISR worked as intended. The second ISR read incorrect INTSTAT values. Observed on Raspberry PI B+. Signed-off-by: Walter Mack <wmack@componentsw.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-11net: ethernet: bgmac: Fix return value check in bgmac_probe()Wei Yongjun1-1/+1
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12Bluetooth: Add support of 13d3:3490 AR3012 deviceDmitry Tunin2-0/+3
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=05 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3490 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1600623 Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-07-11b53: Fix build warning.David S. Miller1-1/+1
drivers/net/dsa/b53/b53_srab.c: In function 'b53_srab_probe': >> drivers/net/dsa/b53/b53_srab.c:388:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] pdata->chip_id = (u32)of_id->data; ^ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11nfp: check idx is -ENOSPC before using it is an indexColin Ian King1-1/+1
idx can be returned as -ENOSPC, so we should check for this first before using it as an index into nn->vxlan_usecnt[] to avoid an out of bounds array offset read. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11net: smc91x: ACPI Enable lan91x adaptersJeremy Linton1-3/+10
Enable lan91x adapters in some ARM machines and models when booted with an ACPI kernel. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11drivers/net: fixup comments after "Future-proof tunnel offload handlers"Sabrina Dubroca4-16/+8
Some comments weren't updated to reflect the renaming of ndo's and the change of arguments. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11Bluetooth: hci_intel: Remove LPM enabling from setup procedureLoic Poulain1-21/+7
LPM can be enabled via a DDC write command at specific DDC ID. As any other DDC value, this is up to the DDC config file to include (or not) the low power mode configuration. Signed-off-by: Loic Poulain <loic.poulain@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-11Revert "net: ethernet: bcmgenet: use phy_ethtool_{get|set}_link_ksettings"Philippe Reynes1-2/+26
This reverts commit 4386f5662e63 ("net: ethernet: bcmgenet: use phy_ethtool_{get|set}_link_ksettings") This patch is wrong, the function phy_ethtool_{get|set}_link_ksettings don't check if the device is running, but the driver bcmgenet need this check. The function {get|set}_settings need to access the mdio bus, and this bus may only be used when the device is running. Otherwise, the clock is disable and a mdio access will fail. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.