aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-06-29qlcnic: Remove obsolete codeAnirban Chakraborty4-57/+13
Current driver uses FW API version 2 and thus code corresponding to FW API version 1 has become obsolete. Clean up this from the driver. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29micrel phy driver - updated(1)Choi, David1-19/+148
Hello all: This patch fixes what Ben mentioned, namely duplicated ids. From: David J. Choi <david.choi@micrel.com> Body of the explanation: This patch has changes as followings; -support the interrupt from phy devices from Micrel Inc. -support more phy devices, ks8737, ks8721, ks8041, ks8051 from Micrel. -remove vsc8201 because this device was used only internal test at Micrel. Signed-off-by: David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29qlcnic: fail when try to setup unsupported featuresStanislaw Gruszka1-3/+10
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29netxen: fail when try to setup unsupported featuresStanislaw Gruszka1-3/+10
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29bnx2x: fail when try to setup unsupported featuresStanislaw Gruszka1-0/+3
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29vmxnet3: fail when try to setup unsupported featuresStanislaw Gruszka1-2/+7
Return EOPNOTSUPP in ethtool_ops->set_flags. Fix coding style while at it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29e1000e: fail when try to setup unsupported featuresStanislaw Gruszka1-1/+0
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29caif-driver: Add CAIF-SPI Protocol driver.Sjur Braendeland4-0/+1122
This patch introduces the CAIF SPI Protocol Driver for CAIF Link Layer. This driver implements a platform driver to accommodate for a platform specific SPI device. A general platform driver is not possible as there are no SPI Slave side Kernel API defined. A sample CAIF SPI Platform device can be found in .../Documentation/networking/caif/spi_porting.txt Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29caif: Kconfig and Makefile fixesSjur Braendeland2-12/+3
Use "depends on" instead of "if" in Kconfig files. Fixed CAIF debug flag, and removed unnecessary clean-* options. Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28cxgb4vf: Stitch new T4 PCI-E SR-IOV Virtual Function driver into the buildCasey Leedom2-0/+24
Stitch new T4 PCI-E SR-IOV Virtual Function driver into the build. Signed-off-by: Casey Leedom Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28cxgb4vf: Add new Makefile for T4 PCI-E SR-IOV Virtual Function driver cxgb4vfCasey Leedom1-0/+7
Add new Makefile for T4 PCI-E SR-IOV Virtual Function driver "cxgb4vf". Signed-off-by: Casey Leedom Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28cxgb4vf: Add main T4 PCI-E SR-IOV Virtual Function driver for cxgb4vfCasey Leedom2-0/+3446
Add main T4 PCI-E SR-IOV Virtual Function driver for "cxgb4vf". Signed-off-by: Casey Leedom Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28cxgb4vf: Add T4 Virtual Function Scatter-Gather Engine DMA codeCasey Leedom1-0/+2460
Add T4 Virtual Function Scatter-Gather Engine DMA code. Signed-off-by: Casey Leedom Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28cxgb4vf: Add core T4 PCI-E SR-IOV Virtual Function hardware definitions and device communication codeCasey Leedom3-0/+1727
Add core T4 PCI-E SR-IOV Virtual Function hardware definitions and device communication code. Signed-off-by: Casey Leedom Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28cxgb4vf: Add code to provision T4 PCI-E SR-IOV Virtual Functions with hardware resourcesCasey Leedom1-0/+106
Add code to provision T4 PCI-E SR-IOV Virtual Functions with hardware resources. Signed-off-by: Casey Leedom Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28cxgb4vf: Add new macros and definitions for hardware constantsCasey Leedom2-0/+42
Add new macros and definitions for hardware constants. Signed-off-by: Casey Leedom Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28cxgb4vf: update to latest T4 firmware API fileCasey Leedom2-7/+22
Update to latest T4 firmware API file. Signed-off-by: Casey Leedom Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28cxgb4vf: small changes to message processing structures/macrosCasey Leedom3-5/+17
Split cpl_tx_pkt_lso into core message structure and encapsulated message, make RSPD_LEN macro match other response descriptor macros. Signed-off-by: Casey Leedom Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28netdev: mdio-octeon: Fix section mismatch errors.David Daney1-3/+3
We started getting: WARNING: vmlinux.o(.data+0x20bd0): Section mismatch in reference from the variable octeon_mdiobus_driver to the function .init.text:octeon_mdiobus_probe() This fixes it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28netdev: octeon_mgmt: Fix section mismatch errors.David Daney1-3/+3
We started getting: WARNING: drivers/net/built-in.o(.data+0x10f0): Section mismatch in reference from the variable octeon_mgmt_driver to the function .init.text:octeon_mgmt_probe() This fixes it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28macvlan: 64 bit rx countersEric Dumazet1-14/+23
Use u64_stats_sync infrastructure to implement 64bit stats. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-283c59x: Specify window explicitly for access to windowed registersBen Hutchings1-148/+140
Currently much of the code assumes that a specific window has been selected, while a few functions save and restore the window. This makes it impossible to introduce fine-grained locking. Make those assumptions explicit by introducing wrapper functions to set the window and read/write a register. Use these everywhere except vortex_interrupt(), vortex_start_xmit() and vortex_rx(). These set the window just once, or not at all in the case of vortex_rx() as it should always be called from vortex_interrupt(). Cache the current window in struct vortex_private to avoid unnecessary hardware writes. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Arne Nordmark <nordmark@mech.kth.se> [against 2.6.32] Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28mlx4: add dynamic LRO disable supportAmerigo Wang1-1/+37
This patch adds dynamic LRO diable support for mlx4 net driver. It also fixes a bug of mlx4, which checks NETIF_F_LRO flag in rx path without rtnl lock. (I don't have mlx4 card, so only did compiling test. Anyone who wants to test this is more than welcome.) This is based on Neil's initial work too, and heavily modified based on Stanislaw's suggestions. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Neil Horman <nhorman@redhat.com> Acked-by: Neil Horman <nhorman@redhat.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-28s2io: add dynamic LRO disable supportJon Mason1-5/+45
This patch adds dynamic LRO disable support for s2io net driver, enables LRO by default, increases the driver version number, and corrects the name of the LRO modparm. This is mostly Wang's patch based on Neil's initial work, heavily modified based on Ramkrishna's suggestions. This has been tested on a Neterion Xframe adapter and verified via adapter LRO statistics. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Neil Horman <nhorman@redhat.com> Acked-by: Neil Horman <nhorman@redhat.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Ramkrishna Vepa <Ramkrishna.Vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25loopback: use u64_stats_sync infrastructureEric Dumazet1-46/+16
Commit 6b10de38f0ef (loopback: Implement 64bit stats on 32bit arches) introduced 64bit stats in loopback driver, using a private seqcount and private helpers. David suggested to introduce a generic infrastructure, added in (net: Introduce u64_stats_sync infrastructure) This patch reimplements loopback 64bit stats using the u64_stats_sync infrastructure. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25net/fec: clean suspend/resumeEric Benard1-18/+12
Commit 59d4289b83b11379d867e2f7146904b19cc96404 converted fec to dev_pm_ops but didn't update the suspend/resume functions thus leading to the following warning : "initialization from incompatible pointer type" when CONFIG_PM is set. This patch also fixe a few indentation and style around CONFIG_PM area. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: netdev@vger.kernel.org Cc: davem@davemloft.net Cc: amit.kucheria@canonical.com Cc: s.hauer@pengutronix.de Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cxgb3: request 7.10 firmwareDivy Le Ray1-2/+2
The driver requests FW 7.10 Bump up driver version. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25sfc: Log clearer error messages for hardware monitorBen Hutchings1-3/+8
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25sfc: Use Toeplitz IPv4 hash for RSS and hash insertionBen Hutchings2-3/+22
Insertion of the Falcon hash is unreliable. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25sfc: Move siena_nic_data::ipv6_rss_key to efx_nic::rx_hash_keyBen Hutchings4-9/+8
We will use this hash key for Toeplitz IPv4 hashing too. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25sfc: Fix reading of inserted hashBen Hutchings2-8/+6
The hash appears immediately before the packet data, not at the beginning of the buffer. This means we can easily use negative offsets from the start of packet data, so adjust the data and length at the top of __efx_rx_packet() instead of wherever we consume the hash. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Clean upsVasanthy Kolluri25-53/+41
1) Update copyright 2) Fix hardware queue descriptor field size CQ_ENET_RQ_DESC_FCOE_SOF_BITS 3) Include rtnetlink.h instead of if_link.h 4) Selectively flush writes to interrupt mask register 5) Use pci_enable_device_mem 6) Remove unused variables and header files 7) Fix size mismatch between memory alloc and free operations of a variable 8) Check for non null arguments to vic_provinfo_alloc Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Bug Fix: Handle surprise hardware removalsVasanthy Kolluri3-4/+20
Handle surprise hardware removals gracefully during devcmd issue and init, cleanup of queues. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Feature Add: Add loopback capability to enic devicesVasanthy Kolluri5-27/+45
Hardware has the loopback capability to queue the packets transmitted from a device to the receive queue of the same device. enic now supports the loopback capability. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Use receive queue buffer blocks of 32/64 entriesVasanthy Kolluri4-26/+37
Change the receive queue buffer allocations into blocks of 32 entries when ring size is less than 64, otherwise use 64 entries per block. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Add new firmware devcmdsVasanthy Kolluri3-9/+146
Add new firmware devcmds - CMD_PROXY_BY_BDF, CMD_PACKET_FILTER_ALL, CMD_ENABLE_WAIT. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Use (netdev|dev|pr)_<level> macro helpers for loggingVasanthy Kolluri9-109/+98
Replace all printk routines with the (netdev|dev|pr)_<level> macros that provide verbose logs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Clean up: Add wrapper routines for firmware devcmd callsVasanthy Kolluri5-84/+201
Add wrapper routines that issue devcmds to firmware and ensure that a devcmd lock is held for each devcmd call. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Use a lighter reset operation for enic devicesVasanthy Kolluri4-8/+55
The port profile information for a dynamic enic device is set by the upper layers, that are oblivious to the device reset operation. We do not want a reset operation erase the network state of a dynamic enic device as there is no way to set up the port profile information again. Hence a lighter reset operation called hang reset is used. Hang reset, unlike soft reset does not reset the network state and resets the host side state only. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Bug Fix: Change hardware ingress vlan rewrite modeVasanthy Kolluri5-7/+68
The current ingress vlan rewrite mode setting lets the hardware strip off the tag control information of a packet received on native vlan. As a result, the priority bits are also lost. The fix is to change the ingress vlan rewrite mode setting such that the complete tag control information is retained for packets that belong to native vlan. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25enic: Feature Add: Replace LRO with GROVasanthy Kolluri3-80/+9
enic now uses the GRO mechanism instead of LRO to pass skbs to upper layers. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Update version to 2.1.3.Michael Chan1-2/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Further unify kcq handling code.Michael Chan1-37/+34
This eliminates some of the duplicate code for the various devices that require the same basic kcq handling. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Restructure kcq processing.Michael Chan1-54/+22
By doing more work in the common function cnic_get_kcqes(), and making full use of the kcq_info structure. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Unify kcq allocation for all devices.Michael Chan2-64/+98
By creating a common data stucture kcq_info for all devices, the kcq (kernel completion queue) for all devices can be allocated by common code. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Unify IRQ code for all hardware types.Michael Chan1-13/+20
By creating a common cnic_doirq(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25cnic: Fine-tune CID memory space calculation.Michael Chan2-15/+21
The current code makes assumptions about the CID (context ID) memory space and starting CID that may not be always correct when firmware changes. In particular, BNX2_ISCSI_START_CID may not always be fixed. We now calculate cp->max_cid_space and cp->iscsi_start_cid dynamically instead of using fixed constants. The unused cp->max_iscsi_conn is also eliminated. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Record hardware RX hash on each skb where possibleBen Hutchings7-3/+49
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Disable setting feature flags that are not implementedBen Hutchings1-1/+0
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24sfc: Replace EFX_DRIVER_NAME with KBUILD_MODNAMEBen Hutchings3-5/+3
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.