aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-05-14block: Split out bio_list_copy_data()Kent Overstreet1-1/+1
Found a bug (with ASAN) where we were passing a bio to bio_copy_data() with bi_next not NULL, when it should have been - a driver had left bi_next set to something after calling bio_endio(). Since the normal case is only copying single bios, split out bio_list_copy_data() to avoid more bugs like this in the future. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14block: Use bioset_init() for fs_bio_setKent Overstreet1-1/+1
Minor optimization - remove a pointer indirection when using fs_bio_set. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14block: consistently use GFP_NOIO instead of __GFP_NORECLAIMChristoph Hellwig5-5/+6
Same numerical value (for now at least), but a much better documentation of intent. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14block: pass an explicit gfp_t to get_requestChristoph Hellwig1-4/+0
blk_old_get_request already has it at hand, and in blk_queue_bio, which is the fast path, it is constant. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14block: sanitize blk_get_request calling conventionsChristoph Hellwig24-35/+32
Switch everyone to blk_get_request_flags, and then rename blk_get_request_flags to blk_get_request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14scsi/osd: remove the gfp argument to osd_start_requestChristoph Hellwig1-13/+11
Always GFP_KERNEL, and keeping it would cause serious complications for the next change. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-14memstick: remove unused variablesChristoph Hellwig2-2/+0
Fixes: 7c2d748e8476 ("memstick: don't call blk_queue_bounce_limit") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11ps3disk: handle highmem pagesChristoph Hellwig1-2/+0
The ps3disk driver already kmaps all pages when copying from/to the internal bounce buffer, so it can accept highmem pages just fine. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11jsflash: handle highmem pagesChristoph Hellwig1-2/+4
Just kmap the bio single page payload before processing it. (and yes, now highmem on sparc32 anyway, but kmap_(un)map atomic are nops, so this gives the right example) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11aoe: handle highmem pagesChristoph Hellwig2-2/+2
Use kmap_atomic when copying out of a bio_vec. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11mtd_blkdevs: handle highmem pagesChristoph Hellwig1-6/+14
Just kmap the single payload page before passing it on to the FTL. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11memstick: don't call blk_queue_bounce_limitChristoph Hellwig2-10/+0
All in-tree host drivers set up a proper dma mask and use the dma-mapping helpers. This means they will be able to deal with any address that we are throwing at them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11DAC960: don't use block layer bounce buffersChristoph Hellwig2-8/+2
DAC960 just sets the block bounce limit to the dma mask, which means that the iommu or swiotlb already take care of the bounce buffering, and the block bouncing can be removed. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11mtip32xx: don't use block layer bounce buffersChristoph Hellwig1-1/+0
mtip32xx just sets the block bounce limit to the dma mask, which means that the iommu or swiotlb already take care of the bounce buffering, and the block bouncing can be removed. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11nvme/pci: Sync controller reset for AER slot_resetKeith Busch1-2/+9
AER handling expects a successful return from slot_reset means the driver made the device functional again. The nvme driver had been using an asynchronous reset to recover the device, so the device may still be initializing after control is returned to the AER handler. This creates problems for subsequent event handling, causing the initializion to fail. This patch fixes that by syncing the controller reset before returning to the AER driver, and reporting the true state of the reset. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199657 Reported-by: Alex Gagniuc <mr.nuke.me@gmail.com> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Tested-by: Alex Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-05-10mtip32xx: Fix an error handling path in 'mtip_pci_probe()'Christophe JAILLET1-1/+1
Branch to the right label in the error handling path in order to keep it logical. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09brd: Mark as non-rotationalSeongJae Park1-0/+4
This commit sets QUEUE_FLAG_NONROT and clears up QUEUE_FLAG_ADD_RANDOM to mark the ramdisks as non-rotational device. Signed-off-by: SeongJae Park <sj38.park@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-09block: consolidate struct request timestamp fieldsOmar Sandoval1-1/+1
Currently, struct request has four timestamp fields: - A start time, set at get_request time, in jiffies, used for iostats - An I/O start time, set at start_request time, in ktime nanoseconds, used for blk-stats (i.e., wbt, kyber, hybrid polling) - Another start time and another I/O start time, used for cfq and bfq These can all be consolidated into one start time and one I/O start time, both in ktime nanoseconds, shaving off up to 16 bytes from struct request depending on the kernel config. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-07loop: remember whether sysfs_create_group() was doneTetsuo Handa2-5/+7
syzbot is hitting WARN() triggered by memory allocation fault injection [1] because loop module is calling sysfs_remove_group() when sysfs_create_group() failed. Fix this by remembering whether sysfs_create_group() succeeded. [1] https://syzkaller.appspot.com/bug?id=3f86c0edf75c86d2633aeb9dd69eccc70bc7e90b Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+9f03168400f56df89dbc6f1751f4458fe739ff29@syzkaller.appspotmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Renamed sysfs_ready -> sysfs_inited. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-07Merge tag 'devicetree-fixes-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds1-9/+21
Pull DeviceTree fixes from Rob Herring: - fix path to display timing binding - fix some typos in interrupt-names and clock-names - fix a resource leak on overlay removal - add missing documentation for R8A77965 DMA, serial, and net - cleanup sunxi pinctrl description - add Kieback & Peter GmbH vendor prefix * tag 'devicetree-fixes-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: panel: lvds: Fix path to display timing bindings dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/ dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/ of: overlay: Stop leaking resources on overlay removal dtc: checks: drop warning for missing PCI bridge bus-range dt-bindings: dmaengine: rcar-dmac: document R8A77965 support dt-bindings: serial: sh-sci: Add support for r8a77965 (H)SCIF dt-bindings: net: ravb: Add support for r8a77965 SoC dt-bindings: pinctrl: sunxi: Fix reference to driver doc: Add vendor prefix for Kieback & Peter GmbH
2018-05-07nvme/pci: Hold controller reference during async probeKeith Busch1-0/+3
It is possible the driver's remove may have freed the controller if the remove callback is invoked prior to the async_schedule starting the reset_work. This patch fixes that by holding a reference on the controller. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Keith Busch <keith.busch@intel.com>
2018-05-06Merge tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds5-34/+37
Pull iommu fixes from Joerg Roedel: - fix a compile warning in the AMD IOMMU driver with irq remapping disabled - fix for VT-d interrupt remapping and invalidation size (caused a BUG_ON when trying to invalidate more than 4GB) - build fix and a regression fix for broken graphics with old DTS for the rockchip iommu driver - a revert in the PCI window reservation code which fixes a regression with VFIO. * tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: rockchip: fix building without CONFIG_OF iommu/vt-d: Use WARN_ON_ONCE instead of BUG_ON in qi_flush_dev_iotlb() iommu/vt-d: fix shift-out-of-bounds in bug checking iommu/dma: Move PCI window region reservation back into dma specific path. iommu/rockchip: Make clock handling optional iommu/amd: Hide unused iommu_table_lock iommu/vt-d: Fix usage of force parameter in intel_ir_reconfigure_irte()
2018-05-06Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-2/+2
Pull irq fix from Thomas Gleixner: "A single fix to prevent false positives in the spurious interrupt detector when more than a single demultiplex register is evaluated in the Qualcom irq combiner driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom: Fix check for spurious interrupts
2018-05-05Merge tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds2-2/+4
Pull x86 platform driver fixes from Darren Hart: - We missed a case in the Dell config dependencies resulting in a possible bad configuration, resolve it by giving up on trying to keep DELL_LAPTOP visible in the menu and make it depend on DELL_SMBIOS. - Fix a null pointer dereference at module unload for the asus-wireless driver. * tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: Kconfig: Fix dell-laptop dependency chain. platform/x86: asus-wireless: Fix NULL pointer dereference
2018-05-05Merge tag 'usb-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds16-57/+132
Pull USB fixes from Greg KH: "Here are some USB driver fixes for 4.17-rc4. The majority of them are some USB gadget fixes that missed my last pull request. The "largest" patch in here is a fix for the old visor driver that syzbot found 6 months or so ago and I finally remembered to fix it. All of these have been in linux-next with no reported issues" * tag 'usb-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "usb: host: ehci: Use dma_pool_zalloc()" usb: typec: tps6598x: handle block reads separately with plain-I2C adapters usb: typec: tcpm: Release the role mux when exiting USB: Accept bulk endpoints with 1024-byte maxpacket xhci: Fix use-after-free in xhci_free_virt_device USB: serial: visor: handle potential invalid device configuration USB: serial: option: adding support for ublox R410M usb: musb: trace: fix NULL pointer dereference in musb_g_tx() usb: musb: host: fix potential NULL pointer dereference usb: gadget: composite Allow for larger configuration descriptors usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue usb: dwc3: gadget: dwc3_gadget_del_and_unmap_request() can be static usb: dwc2: pci: Fix error return code in dwc2_pci_probe() usb: dwc2: WA for Full speed ISOC IN in DDMA mode. usb: dwc2: dwc2_vbus_supply_init: fix error check usb: gadget: f_phonet: fix pn_net_xmit()'s return type
2018-05-04Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds7-41/+50
Pull clk fixes froom Stephen Boyd: "A handful of fixes for the stm32mp1 clk driver came in during the merge window for the driver that got merged in the merge window. Plus a warning fix for unused PM ops and a couple fixes for the meson clk driver clk names that went unnoticed with the regmap rework. There's also another fix in here for the mux rounding flag which wasn't doing what it said it did, but now it does" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: meson: meson8b: fix meson8b_cpu_clk parent clock name clk: meson: meson8b: fix meson8b_fclk_div3_div clock name clk: meson: drop meson_aoclk_gate_regmap_ops clk: meson: honor CLK_MUX_ROUND_CLOSEST in clk_regmap clk: honor CLK_MUX_ROUND_CLOSEST in generic clk mux clk: cs2000: mark resume function as __maybe_unused clk: stm32mp1: remove ck_apb_dbg clock clk: stm32mp1: set stgen_k clock as critical clk: stm32mp1: add missing tzc2 clock clk: stm32mp1: fix SAI3 & SAI4 clocks clk: stm32mp1: remove unused dfsdm_src[] const clk: stm32mp1: add missing static
2018-05-04Merge tag 'rproc-v4.17-1' of git://github.com/andersson/remoteprocLinus Torvalds3-2/+6
Pull remoteproc and rpmsg fixes from Bjorn Andersson: - fix screw-up when reversing boolean for rproc_stop() - add missing OF node refcounting dereferences - add missing MODULE_ALIAS in rpmsg_char * tag 'rproc-v4.17-1' of git://github.com/andersson/remoteproc: rpmsg: added MODULE_ALIAS for rpmsg_char remoteproc: qcom: Fix potential device node leaks remoteproc: fix crashed parameter logic on stop call
2018-05-04Merge tag 'drm-fixes-for-v4.17-rc4' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds5-26/+70
Pull drm fixes from Dave Airlie: "vmwgfx, i915, vc4, vga dac fixes. This seems eerily quiet, so I expect it will explode next week or something. One i915 model firmware, two vmwgfx fixes, one vc4 fix and one bridge leak fix" * tag 'drm-fixes-for-v4.17-rc4' of git://people.freedesktop.org/~airlied/linux: drm/bridge: vga-dac: Fix edid memory leak drm/vc4: Make sure vc4_bo_{inc,dec}_usecnt() calls are balanced drm/i915/glk: Add MODULE_FIRMWARE for Geminilake drm/vmwgfx: Fix a buffer object leak drm/vmwgfx: Clean up fbdev modeset locking
2018-05-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds43-188/+387
Pull rdma fixes from Doug Ledford: "This is our first pull request of the rc cycle. It's not that it's been overly quiet, we were just waiting on a few things before sending this off. For instance, the 6 patch series from Intel for the hfi1 driver had actually been pulled in on Tuesday for a Wednesday pull request, only to have Jason notice something I missed, so we held off for some testing, and then on Thursday had to respin the series because the very first patch needed a minor fix (unnecessary cast is all). There is a sizable hns patch series in here, as well as a reasonably largish hfi1 patch series, then all of the lines of uapi updates are just the change to the new official Linux-OpenIB SPDX tag (a bunch of our files had what amounts to a BSD-2-Clause + MIT Warranty statement as their license as a result of the initial code submission years ago, and the SPDX folks decided it was unique enough to warrant a unique tag), then the typical mlx4 and mlx5 updates, and finally some cxgb4 and core/cache/cma updates to round out the bunch. None of it was overly large by itself, but in the 2 1/2 weeks we've been collecting patches, it has added up :-/. As best I can tell, it's been through 0day (I got a notice about my last for-next push, but not for my for-rc push, but Jason seems to think that failure messages are prioritized and success messages not so much). It's also been through linux-next. And yes, we did notice in the context portion of the CMA query gid fix patch that there is a dubious BUG_ON() in the code, and have plans to audit our BUG_ON usage and remove it anywhere we can. Summary: - Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off) - SPDX license tag cleanups (new tag Linux-OpenIB) - RoCE GID fixes related to default GIDs - Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch), mlx4, mlx5, and hfi1 (medium batch)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (52 commits) RDMA/cma: Do not query GID during QP state transition to RTR IB/mlx4: Fix integer overflow when calculating optimal MTT size IB/hfi1: Fix memory leak in exception path in get_irq_affinity() IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used IB/hfi1: Fix loss of BECN with AHG IB/hfi1 Use correct type for num_user_context IB/hfi1: Fix handling of FECN marked multicast packet IB/core: Make ib_mad_client_id atomic iw_cxgb4: Atomically flush per QP HW CQEs IB/uverbs: Fix kernel crash during MR deregistration flow IB/uverbs: Prevent reregistration of DM_MR to regular MR RDMA/mlx4: Add missed RSS hash inner header flag RDMA/hns: Fix a couple misspellings RDMA/hns: Submit bad wr RDMA/hns: Update assignment method for owner field of send wqe RDMA/hns: Adjust the order of cleanup hem table RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set RDMA/hns: Remove some unnecessary attr_mask judgement RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set ...
2018-05-04Merge tag 'for-linus-20180504' of git://git.kernel.dk/linux-blockLinus Torvalds12-62/+117
Pull block fixes from Jens Axboe: "A collection of fixes that should to into this release. This contains: - Set of bcache fixes from Coly, fixing regression in patches that went into this series. - Set of NVMe fixes by way of Keith. - Set of bdi related fixes, one from Jan and two from Tetsuo Handa, fixing various issues around device addition/removal. - Two block inflight fixes from Omar, fixing issues around the transition to using tags for blk-mq inflight accounting that we did a few releases ago" * tag 'for-linus-20180504' of git://git.kernel.dk/linux-block: bdi: Fix oops in wb_workfn() nvmet: switch loopback target state to connecting when resetting nvme/multipath: Fix multipath disabled naming collisions nvme/multipath: Disable runtime writable enabling parameter nvme: Set integrity flag for user passthrough commands nvme: fix potential memory leak in option parsing bdi: Fix use after free bug in debugfs_remove() bdi: wake up concurrent wb_shutdown() callers. bcache: use pr_info() to inform duplicated CACHE_SET_IO_DISABLE set bcache: set dc->io_disable to true in conditional_stop_bcache_device() bcache: add wait_for_kthread_stop() in bch_allocator_thread() bcache: count backing device I/O error for writeback I/O bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error() bcache: store disk name in struct cache and struct cached_dev blk-mq: fix sysfs inflight counter blk-mq: count allocated but not started requests in iostats inflight
2018-05-04Merge tag 'usb-serial-4.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linusGreg Kroah-Hartman2-34/+40
Johan writes: USB-serial fixes for v4.17-rc4 Here's a fix for a long-standing issue in the visor driver, which could have security implications. Included is also a new modem device id. Both commits have been in linux-next for a couple of days with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org>
2018-05-04Revert "usb: host: ehci: Use dma_pool_zalloc()"Greg Kroah-Hartman2-3/+6
This reverts commit 22072e83ebd510fb6a090aef9d65ccfda9b1e7e4 as it is broken. Alan writes: What you can't see just from reading the patch is that in both cases (ehci->itd_pool and ehci->sitd_pool) there are two allocation paths -- the two branches of an "if" statement -- and only one of the paths calls dma_pool_[z]alloc. However, the memset is needed for both paths, and so it can't be eliminated. Given that it must be present, there's no advantage to calling dma_pool_zalloc rather than dma_pool_alloc. Reported-by: Erick Cafferata <erick@cafferata.me> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-04platform/x86: Kconfig: Fix dell-laptop dependency chain.Mario Limonciello1-1/+1
As reported by Randy Dunlap: >> WARNING: unmet direct dependencies detected for DELL_SMBIOS >> Depends on [m]: X86 [=y] && X86_PLATFORM_DEVICES [=y] >> && (DCDBAS [=m] || >> DCDBAS [=m]=n) && (ACPI_WMI [=n] || ACPI_WMI [=n]=n) >> Selected by [y]: >> - DELL_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] >> && DMI [=y] >> && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] || >> ACPI_VIDEO [=n]=n) >> && (RFKILL [=n] || RFKILL [=n]=n) && SERIO_I8042 [=y] >> Right now it's possible to set dell laptop to compile in but this causes dell-smbios to compile in which breaks if dcdbas is a module. Dell laptop shouldn't select dell-smbios anymore, but depend on it. Fixes: 32d7b19bad96 (platform/x86: dell-smbios: Resolve dependency error on DCDBAS) Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-05-04platform/x86: asus-wireless: Fix NULL pointer dereferenceJoão Paulo Rechi Vita1-1/+3
When the module is removed the led workqueue is destroyed in the remove callback, before the led device is unregistered from the led subsystem. This leads to a NULL pointer derefence when the led device is unregistered automatically later as part of the module removal cleanup. Bellow is the backtrace showing the problem. BUG: unable to handle kernel NULL pointer dereference at (null) IP: __queue_work+0x8c/0x410 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Modules linked in: ccm edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 joydev crypto_simd asus_nb_wmi glue_helper uvcvideo snd_hda_codec_conexant snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel asus_wmi snd_hda_codec cryptd snd_hda_core sparse_keymap videobuf2_vmalloc arc4 videobuf2_memops snd_hwdep input_leds videobuf2_v4l2 ath9k psmouse videobuf2_core videodev ath9k_common snd_pcm ath9k_hw media fam15h_power ath k10temp snd_timer mac80211 i2c_piix4 r8169 mii mac_hid cfg80211 asus_wireless(-) snd soundcore wmi shpchp 8250_dw ip_tables x_tables amdkfd amd_iommu_v2 amdgpu radeon chash i2c_algo_bit drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ahci ttm libahci drm video CPU: 3 PID: 2177 Comm: rmmod Not tainted 4.15.0-5-generic #6+dev94.b4287e5bem1-Endless Hardware name: ASUSTeK COMPUTER INC. X555DG/X555DG, BIOS 5.011 05/05/2015 RIP: 0010:__queue_work+0x8c/0x410 RSP: 0018:ffffbe8cc249fcd8 EFLAGS: 00010086 RAX: ffff992ac6810800 RBX: 0000000000000000 RCX: 0000000000000008 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff992ac6400e18 RBP: ffffbe8cc249fd18 R08: ffff992ac6400db0 R09: 0000000000000000 R10: 0000000000000040 R11: ffff992ac6400dd8 R12: 0000000000002000 R13: ffff992abd762e00 R14: ffff992abd763e38 R15: 000000000001ebe0 FS: 00007f318203e700(0000) GS:ffff992aced80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001c720e000 CR4: 00000000001406e0 Call Trace: queue_work_on+0x38/0x40 led_state_set+0x2c/0x40 [asus_wireless] led_set_brightness_nopm+0x14/0x40 led_set_brightness+0x37/0x60 led_trigger_set+0xfc/0x1d0 led_classdev_unregister+0x32/0xd0 devm_led_classdev_release+0x11/0x20 release_nodes+0x109/0x1f0 devres_release_all+0x3c/0x50 device_release_driver_internal+0x16d/0x220 driver_detach+0x3f/0x80 bus_remove_driver+0x55/0xd0 driver_unregister+0x2c/0x40 acpi_bus_unregister_driver+0x15/0x20 asus_wireless_driver_exit+0x10/0xb7c [asus_wireless] SyS_delete_module+0x1da/0x2b0 entry_SYSCALL_64_fastpath+0x24/0x87 RIP: 0033:0x7f3181b65fd7 RSP: 002b:00007ffe74bcbe18 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3181b65fd7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555ea2559258 RBP: 0000555ea25591f0 R08: 00007ffe74bcad91 R09: 000000000000000a R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000003 R13: 00007ffe74bcae00 R14: 0000000000000000 R15: 0000555ea25591f0 Code: 01 00 00 02 0f 85 7d 01 00 00 48 63 45 d4 48 c7 c6 00 f4 fa 87 49 8b 9d 08 01 00 00 48 03 1c c6 4c 89 f7 e8 87 fb ff ff 48 85 c0 <48> 8b 3b 0f 84 c5 01 00 00 48 39 f8 0f 84 bc 01 00 00 48 89 c7 RIP: __queue_work+0x8c/0x410 RSP: ffffbe8cc249fcd8 CR2: 0000000000000000 ---[ end trace 7aa4f4a232e9c39c ]--- Unregistering the led device on the remove callback before destroying the workqueue avoids this problem. https://bugzilla.kernel.org/show_bug.cgi?id=196097 Reported-by: Dun Hum <bitter.taste@gmx.com> Cc: stable@vger.kernel.org Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-05-04Merge tag 'pm-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds1-2/+44
Pull power management fix from Rafael Wysocki: "This fixes a regression from the 4.14 cycle in the CPPC cpufreq driver causing it to use an incorrect transition delay value which leads to a very high rate of frequency change requests when the schedutil governor is in use (Prashanth Prakash)" * tag 'pm-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq / CPPC: Set platform specific transition_delay_us
2018-05-04Merge tag 'media/v4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds63-77/+77
Pull media fixes from Mauro Carvalho Chehab: - a trivial one-line fix addressing a PTR_ERR() getting value from a wrong var at imx driver - a patch changing my e-mail at the Kernel tree to mchehab@kernel.org. no code changes * tag 'media/v4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: MAINTAINERS & files: Canonize the e-mails I use at files media: imx-media-csi: Fix inconsistent IS_ERR and PTR_ERR
2018-05-04MAINTAINERS & files: Canonize the e-mails I use at filesMauro Carvalho Chehab62-76/+76
From now on, I'll start using my @kernel.org as my development e-mail. As such, let's remove the entries that point to the old mchehab@s-opensource.com at MAINTAINERS file. For the files written with a copyright with mchehab@s-opensource, let's keep Samsung on their names, using mchehab+samsung@kernel.org, in order to keep pointing to my employer, with sponsors the work. For the files written before I join Samsung (on July, 4 2013), let's just use mchehab@kernel.org. For bug reports, we can simply point to just kernel.org, as this will reach my mchehab+samsung inbox anyway. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Brian Warner <brian.warner@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: imx-media-csi: Fix inconsistent IS_ERR and PTR_ERRFrom: Gustavo A. R. Silva1-1/+1
Fix inconsistent IS_ERR and PTR_ERR in imx_csi_probe. The proper pointer to be passed as argument is pinctrl instead of priv->vdev. This issue was detected with the help of Coccinelle. Fixes: 52e17089d185 ("media: imx: Don't initialize vars that won't be used") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds34-136/+287
Pull networking fixes from David Miller: 1) Various sockmap fixes from John Fastabend (pinned map handling, blocking in recvmsg, double page put, error handling during redirect failures, etc.) 2) Fix dead code handling in x86-64 JIT, from Gianluca Borello. 3) Missing device put in RDS IB code, from Dag Moxnes. 4) Don't process fast open during repair mode in TCP< from Yuchung Cheng. 5) Move address/port comparison fixes in SCTP, from Xin Long. 6) Handle add a bond slave's master into a bridge properly, from Hangbin Liu. 7) IPv6 multipath code can operate on unitialized memory due to an assumption that the icmp header is in the linear SKB area. Fix from Eric Dumazet. 8) Don't invoke do_tcp_sendpages() recursively via TLS, from Dave Watson. 9) Fix memory leaks in x86-64 JIT, from Daniel Borkmann. 10) RDS leaks kernel memory to userspace, from Eric Dumazet. 11) DCCP can invoke a tasklet on a freed socket, take a refcount. Also from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits) dccp: fix tasklet usage smc: fix sendpage() call net/smc: handle unregistered buffers net/smc: call consolidation qed: fix spelling mistake: "offloded" -> "offloaded" net/mlx5e: fix spelling mistake: "loobpack" -> "loopback" tcp: restore autocorking rds: do not leak kernel memory to user land qmi_wwan: do not steal interfaces from class drivers ipv4: fix fnhe usage by non-cached routes bpf: sockmap, fix error handling in redirect failures bpf: sockmap, zero sg_size on error when buffer is released bpf: sockmap, fix scatterlist update on error path in send with apply net_sched: fq: take care of throttled flows before reuse ipv6: Revert "ipv6: Allow non-gateway ECMP for IPv6" bpf, x64: fix memleak when not converging on calls bpf, x64: fix memleak when not converging after image net/smc: restrict non-blocking connect finish 8139too: Use disable_irq_nosync() in rtl8139_poll_controller() sctp: fix the issue that the cookie-ack with auth can't get processed ...
2018-05-03Merge branch 'parisc-4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds1-1/+1
Pull parisc fixes from Helge Deller: "Fix two section mismatches, convert to read_persistent_clock64(), add further documentation regarding the HPMC crash handler and make bzImage the default build target" * 'parisc-4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix section mismatches parisc: drivers.c: Fix section mismatches parisc: time: Convert read_persistent_clock() to read_persistent_clock64() parisc: Document rules regarding checksum of HPMC handler parisc: Make bzImage default build target
2018-05-04Merge branch 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux into drm-fixesDave Airlie2-24/+21
Two fixes for now, one for a long standing problem uncovered by a commit in the 4.17 merge window, one for a regression introduced by a previous bugfix, Cc'd stable. * 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix a buffer object leak drm/vmwgfx: Clean up fbdev modeset locking
2018-05-03RDMA/cma: Do not query GID during QP state transition to RTRParav Pandit1-7/+0
When commit [1] was added, SGID was queried to derive the SMAC address. Then, later on during a refactor [2], SMAC was no longer needed. However, the now useless GID query remained. Then during additional code changes later on, the GID query was being done in such a way that it caused iWARP queries to start breaking. Remove the useless GID query and resolve the iWARP breakage at the same time. This is discussed in [3]. [1] commit dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures") [2] commit 5c266b2304fb ("IB/cm: Remove the usage of smac and vid of qp_attr and cm_av") [3] https://www.spinics.net/lists/linux-rdma/msg63951.html Suggested-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/mlx4: Fix integer overflow when calculating optimal MTT sizeJack Morgenstein1-1/+1
When the kernel was compiled using the UBSAN option, we saw the following stack trace: [ 1184.827917] UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx4/mr.c:349:27 [ 1184.828114] signed integer overflow: [ 1184.828247] -2147483648 - 1 cannot be represented in type 'int' The problem was caused by calling round_up in procedure mlx4_ib_umem_calc_optimal_mtt_size (on line 349, as noted in the stack trace) with the second parameter (1 << block_shift) (which is an int). The second parameter should have been (1ULL << block_shift) (which is an unsigned long long). (1 << block_shift) is treated by the compiler as an int (because 1 is an integer). Now, local variable block_shift is initialized to 31. If block_shift is 31, 1 << block_shift is 1 << 31 = 0x80000000=-214748368. This is the most negative int value. Inside the round_up macro, there is a cast applied to ((1 << 31) - 1). However, this cast is applied AFTER ((1 << 31) - 1) is calculated. Since (1 << 31) is treated as an int, we get the negative overflow identified by UBSAN in the process of calculating ((1 << 31) - 1). The fix is to change (1 << block_shift) to (1ULL << block_shift) on line 349. Fixes: 9901abf58368 ("IB/mlx4: Use optimal numbers of MTT entries") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/hfi1: Fix memory leak in exception path in get_irq_affinity()Sebastian Sanchez1-6/+5
When IRQ affinity is set and the interrupt type is unknown, a cpu mask allocated within the function is never freed. Fix this memory leak by allocating memory within the scope where it is used. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failureSebastian Sanchez3-10/+30
When allocating device data, if there's an allocation failure, the already allocated memory won't be freed such as per-cpu counters. Fix memory leaks in exception path by creating a common reentrant clean up function hfi1_clean_devdata() to be used at driver unload time and device data allocation failure. To accomplish this, free_platform_config() and clean_up_i2c() are changed to be reentrant to remove dependencies when they are called in different order. This helps avoid NULL pointer dereferences introduced by this patch if those two functions weren't reentrant. In addition, set dd->int_counter, dd->rcv_limit, dd->send_schedule and dd->tx_opstats to NULL after they're freed in hfi1_clean_devdata(), so that hfi1_clean_devdata() is fully reentrant. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/hfi1: Fix NULL pointer dereference when invalid num_vls is usedSebastian Sanchez2-3/+2
When an invalid num_vls is used as a module parameter, the code execution follows an exception path where the macro dd_dev_err() expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This causes a NULL pointer dereference. Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev earlier in the code. If a dd exists, then dd->pcidev and dd->pcidev->dev always exists. BUG: unable to handle kernel NULL pointer dereference at 00000000000000f0 IP: __dev_printk+0x15/0x90 Workqueue: events work_for_cpu_fn RIP: 0010:__dev_printk+0x15/0x90 Call Trace: dev_err+0x6c/0x90 ? hfi1_init_pportdata+0x38d/0x3f0 [hfi1] hfi1_init_dd+0xdd/0x2530 [hfi1] ? pci_conf1_read+0xb2/0xf0 ? pci_read_config_word.part.9+0x64/0x80 ? pci_conf1_write+0xb0/0xf0 ? pcie_capability_clear_and_set_word+0x57/0x80 init_one+0x141/0x490 [hfi1] local_pci_probe+0x3f/0xa0 work_for_cpu_fn+0x10/0x20 process_one_work+0x152/0x350 worker_thread+0x1cf/0x3e0 kthread+0xf5/0x130 ? max_active_store+0x80/0x80 ? kthread_bind+0x10/0x10 ? do_syscall_64+0x6e/0x1a0 ? SyS_exit_group+0x10/0x10 ret_from_fork+0x35/0x40 Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/hfi1: Fix loss of BECN with AHGMike Marciniszyn1-10/+40
AHG may be armed to use the stored header, which by design is limited to edits in the PSN/A 32 bit word (bth2). When the code is trying to send a BECN, the use of the stored header will lose the BECN bit. Fix by avoiding AHG when getting ready to send a BECN. This is accomplished by always claiming the packet is not a middle packet which is an AHG precursor. BECNs are not a normal case and this should not hurt AHG optimizations. Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/hfi1 Use correct type for num_user_contextMichael J. Ruhl1-2/+2
The module parameter num_user_context is defined as 'int' and defaults to -1. The module_param_named() says that it is uint. Correct module_param_named() type information and update the modinfo text to reflect the default value. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/hfi1: Fix handling of FECN marked multicast packetMike Marciniszyn3-10/+21
The code for handling a marked UD packet unconditionally returns the dlid in the header of the FECN marked packet. This is not correct for multicast packets where the DLID is in the multicast range. The subsequent attempt to send the CNP with the multicast lid will cause the chip to halt the ack send context because the source lid doesn't match the chip programming. The send context will be halted and flush any other pending packets in the pio ring causing the CNP to not be sent. A part of investigating the fix, it was determined that the 16B work broke the FECN routine badly with inconsistent use of 16 bit and 32 bits types for lids and pkeys. Since the port's source lid was correctly 32 bits the type mixmatches need to be dealt with at the same time as fixing the CNP header issue. Fix these issues by: - Using the ports lid for as the SLID for responding to FECN marked UD packets - Insure pkey is always 16 bit in this and subordinate routines - Insure lids are 32 bits in this and subordinate routines Cc: <stable@vger.kernel.org> # 4.14.x Fixes: 88733e3b8450 ("IB/hfi1: Add 16B UD support") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03qed: fix spelling mistake: "offloded" -> "offloaded"Colin Ian King1-1/+1
Trivial fix to spelling mistake in DP_NOTICE message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.