aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-01-08RDMA/siw: Fix handling of zero-sized Read and Receive Queues.Bernard Metzler5-146/+177
During connection setup, the application may choose to zero-size inbound and outbound READ queues, as well as the Receive queue. This patch fixes handling of zero-sized queues, but not prevents it. Kamal Heib says in an initial error report: When running the blktests over siw the following shift-out-of-bounds is reported, this is happening because the passed IRD or ORD from the ulp could be zero which will lead to unexpected behavior when calling roundup_pow_of_two(), fix that by blocking zero values of ORD or IRD. UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 20 PID: 3957 Comm: kworker/u64:13 Tainted: G S 5.10.0-rc6 #2 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: dump_stack+0x99/0xcb ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold.11+0xb4/0xf3 ? down_write+0x183/0x3d0 siw_qp_modify.cold.8+0x2d/0x32 [siw] ? __local_bh_enable_ip+0xa5/0xf0 siw_accept+0x906/0x1b60 [siw] ? xa_load+0x147/0x1f0 ? siw_connect+0x17a0/0x17a0 [siw] ? lock_downgrade+0x700/0x700 ? siw_get_base_qp+0x1c2/0x340 [siw] ? _raw_spin_unlock_irqrestore+0x39/0x40 iw_cm_accept+0x1f4/0x430 [iw_cm] rdma_accept+0x3fa/0xb10 [rdma_cm] ? check_flush_dependency+0x410/0x410 ? cma_rep_recv+0x570/0x570 [rdma_cm] nvmet_rdma_queue_connect+0x1a62/0x2680 [nvmet_rdma] ? nvmet_rdma_alloc_cmds+0xce0/0xce0 [nvmet_rdma] ? lock_release+0x56e/0xcc0 ? lock_downgrade+0x700/0x700 ? lock_downgrade+0x700/0x700 ? __xa_alloc_cyclic+0xef/0x350 ? __xa_alloc+0x2d0/0x2d0 ? rdma_restrack_add+0xbe/0x2c0 [ib_core] ? __ww_mutex_die+0x190/0x190 cma_cm_event_handler+0xf2/0x500 [rdma_cm] iw_conn_req_handler+0x910/0xcb0 [rdma_cm] ? _raw_spin_unlock_irqrestore+0x39/0x40 ? trace_hardirqs_on+0x1c/0x150 ? cma_ib_handler+0x8a0/0x8a0 [rdma_cm] ? __kasan_kmalloc.constprop.7+0xc1/0xd0 cm_work_handler+0x121c/0x17a0 [iw_cm] ? iw_cm_reject+0x190/0x190 [iw_cm] ? trace_hardirqs_on+0x1c/0x150 process_one_work+0x8fb/0x16c0 ? pwq_dec_nr_in_flight+0x320/0x320 worker_thread+0x87/0xb40 ? __kthread_parkme+0xd1/0x1a0 ? process_one_work+0x16c0/0x16c0 kthread+0x35f/0x430 ? kthread_mod_delayed_work+0x180/0x180 ret_from_fork+0x22/0x30 Fixes: a531975279f3 ("rdma/siw: main include file") Fixes: f29dd55b0236 ("rdma/siw: queue pair methods") Fixes: 8b6a361b8c48 ("rdma/siw: receive path") Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Fixes: 303ae1cdfdf7 ("rdma/siw: application interface") Link: https://lore.kernel.org/r/20210108125845.1803-1-bmt@zurich.ibm.com Reported-by: Kamal Heib <kamalheib1@gmail.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-07RDMA: Use kzalloc for allocating only one thingZheng Yongjun2-2/+2
Use kzalloc rather than kcalloc(1,...) The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ @@ - kcalloc(1, + kzalloc( ...) // </smpl> Link: https://lore.kernel.org/r/20201229135223.23815-1-zhengyongjun3@huawei.com Link: https://lore.kernel.org/r/20201229135232.23869-1-zhengyongjun3@huawei.com Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-07RDMA/cma: Delete useless kfree codeZheng Yongjun1-10/+2
The parameter of kfree function is NULL, so kfree code is useless, delete it. Therefore, goto expression is no longer needed, so simplify it. cma_dev_group is always pre-zero'd before reaching make_cma_ports, so the NULL set to cma_dev_group->ports is unneeded too. Link: https://lore.kernel.org/r/20201216080219.18184-1-zhengyongjun3@huawei.com Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-07RDMA/hfi1: remove h from printk format specifierTom Rix1-1/+1
See Documentation/core-api/printk-formats.rst. h should no longer be used in the format specifier for printk. Link: https://lore.kernel.org/r/20201215183509.2072517-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-07RDMA/hns: remove h from printk format specifierTom Rix1-1/+1
This change fixes the checkpatch warning described in commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]") Standard integer promotion is already done and %hx and %hhx is useless so do not encourage the use of %hh[xudi] or %h[xudi]. Link: https://lore.kernel.org/r/20201223193041.122850-1-trix@redhat.com Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-07RDMA: Convert comma to semicolonZheng Yongjun4-5/+5
Replace a comma between expression statements by a semicolon. Link: https://lore.kernel.org/r/20201214134118.4349-1-zhengyongjun3@huawei.com Link: https://lore.kernel.org/r/20201214134146.4456-1-zhengyongjun3@huawei.com Link: https://lore.kernel.org/r/20201214134218.4510-1-zhengyongjun3@huawei.com Link: https://lore.kernel.org/r/20201214134243.4563-1-zhengyongjun3@huawei.com Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-03Linux 5.11-rc2Linus Torvalds1-1/+1
2021-01-01depmod: handle the case of /sbin/depmod without /sbin in PATHLinus Torvalds1-0/+2
Commit 436e980e2ed5 ("kbuild: don't hardcode depmod path") stopped hard-coding the path of depmod, but in the process caused trouble for distributions that had that /sbin location, but didn't have it in the PATH (generally because /sbin is limited to the super-user path). Work around it for now by just adding /sbin to the end of PATH in the depmod.sh script. Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-30kernel/io_uring: cancel io_uring before task worksPavel Begunkov2-2/+2
For cancelling io_uring requests it needs either to be able to run currently enqueued task_works or having it shut down by that moment. Otherwise io_uring_cancel_files() may be waiting for requests that won't ever complete. Go with the first way and do cancellations before setting PF_EXITING and so before putting the task_work infrastructure into a transition state where task_work_run() would better not be called. Cc: stable@vger.kernel.org # 5.5+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-30io_uring: fix io_sqe_files_unregister() hangsPavel Begunkov1-2/+22
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes, however requests keeping them may never complete, e.g. because of some userspace dependency. Make sure it's interruptible otherwise it would hang forever. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-30io_uring: add a helper for setting a ref nodePavel Begunkov1-10/+12
Setting a new reference node to a file data is not trivial, don't repeat it, add and use a helper. Cc: stable@vger.kernel.org # 5.6+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-30intel_idle: add SnowRidge C-state tableArtem Bityutskiy1-1/+40
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville platforms. The following has been changed. 1. C1E latency changed from 10us to 15us. It was measured using the open source "wult" tool (the "nic" method, 15us is the 99.99th percentile). 2. C1E power break even changed from 20us to 25us, which may result in less C1E residency in some workloads. 3. C6 latency changed from 50us to 130us. Measured the same way as C1E. The C6 C-state is supported only by some SnowRidge revisions, so add a C-state table commentary about this. On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even though C6 is present in the table, the driver will only use it if the CPU does support it. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-30cpufreq: intel_pstate: Fix fast-switch fallback pathRafael J. Wysocki1-1/+0
When sugov_update_single_perf() falls back to the "frequency" path due to the missing scale-invariance, it will call cpufreq_driver_fast_switch() via sugov_fast_switch() and the driver's ->fast_switch() callback will be invoked, so it must not be NULL. However, after commit a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to NULL when it is going to use intel_cpufreq_adjust_perf(), which is a mistake, because on x86 the scale-invariance may be turned off dynamically, so modify it to retain the original ->adjust_perf() callback pointer. Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Reported-by: Kenneth R. Crudup <kenny@panix.com> Tested-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-30s390/Kconfig: sort config S390 select list once againHeiko Carstens1-14/+17
...and add comments at the top and bottom. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-30s390: update defconfigsHeiko Carstens3-7/+18
Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-29block: add debugfs stanza for QUEUE_FLAG_NOWAITAndres Freund1-0/+1
This was missed in 021a24460dc2. Leads to the numeric value of QUEUE_FLAG_NOWAIT (i.e. 29) showing up in /sys/kernel/debug/block/*/state. Fixes: 021a24460dc28e7412aecfae89f60e1847e685c0 Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-29fs: block_dev.c: fix kernel-doc warnings from struct block_device changesRandy Dunlap1-1/+1
Fix new kernel-doc warnings in fs/block_dev.c: ../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming' ../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev' Fixes: 4e7b5671c6a8 ("block: remove i_bdev") Fixes: 37c3fc9abb25 ("block: simplify the block device claiming interface") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-fsdevel@vger.kernel.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-29mm: slub: call account_slab_page() after slab page initializationRoman Gushchin1-3/+2
It's convenient to have page->objects initialized before calling into account_slab_page(). In particular, this information can be used to pre-alloc the obj_cgroup vector. Let's call account_slab_page() a bit later, after the initialization of page->objects. This commit doesn't bring any functional change, but is required for further optimizations. [akpm@linux-foundation.org: undo changes needed by forthcoming mm-memcg-slab-pre-allocate-obj_cgroups-for-slab-caches-with-slab_account.patch] Link: https://lkml.kernel.org/r/20201110195753.530157-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.cRandy Dunlap4-19/+9
In commit 11fb479ff5d9 ("zlib: export S390 symbols for zlib modules"), I added EXPORT_SYMBOL()s to dfltcc_inflate.c but then Mikhail said that these should probably be in dfltcc_syms.c with the other EXPORT_SYMBOL()s. However, that is contrary to the current kernel style, which places EXPORT_SYMBOL() immediately after the function that it applies to, so move all EXPORT_SYMBOL()s to their respective function locations and drop the dfltcc_syms.c file. Also move MODULE_LICENSE() from the deleted file to dfltcc.c. [rdunlap@infradead.org: remove dfltcc_syms.o from Makefile] Link: https://lkml.kernel.org/r/20201227171837.15492-1-rdunlap@infradead.org Link: https://lkml.kernel.org/r/20201219052530.28461-1-rdunlap@infradead.org Fixes: 11fb479ff5d9 ("zlib: export S390 symbols for zlib modules") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Zaslonko Mikhail <zaslonko@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29lib/zlib: fix inflating zlib streams on s390Ilya Leoshkevich1-2/+2
Decompressing zlib streams on s390 fails with "incorrect data check" error. Userspace zlib checks inflate_state.flags in order to byteswap checksums only for zlib streams, and s390 hardware inflate code, which was ported from there, tries to match this behavior. At the same time, kernel zlib does not use inflate_state.flags, so it contains essentially random values. For many use cases either zlib stream is zeroed out or checksum is not used, so this problem is masked, but at least SquashFS is still affected. Fix by always passing a checksum to and from the hardware as is, which matches zlib_inflate()'s expectations. Link: https://lkml.kernel.org/r/20201215155551.894884-1-iii@linux.ibm.com Fixes: 126196100063 ("lib/zlib: add s390 hardware support for kernel zlib_inflate") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29lib/genalloc: fix the overflow when size is too bigHuang Shijie1-12/+13
Some graphic card has very big memory on chip, such as 32G bytes. In the following case, it will cause overflow: pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE); ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE); va = gen_pool_alloc(pool, SZ_4G); The overflow occurs in gen_pool_alloc_algo_owner(): .... size = nbits << order; .... The @nbits is "int" type, so it will overflow. Then the gen_pool_avail() will return the wrong value. This patch converts some "int" to "unsigned long", and changes the compare code in while. Link: https://lkml.kernel.org/r/20201229060657.3389-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Reported-by: Shi Jiasheng <jiasheng.shi@iluvatar.ai> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29kdev_t: always inline major/minor helper functionsJosh Poimboeuf1-11/+11
Silly GCC doesn't always inline these trivial functions. Fixes the following warning: arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> [build-tested] Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29sizes.h: add SZ_8G/SZ_16G/SZ_32G macrosHuang Shijie1-0/+3
Add these macros, since we can use them in drivers. Link: https://lkml.kernel.org/r/20201229072819.11183-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29local64.h: make <asm/local64.h> mandatoryRandy Dunlap22-21/+1
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29kasan: fix null pointer dereference in kasan_record_aux_stackWalter Wu1-0/+2
Syzbot reported the following [1]: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 2d993067 P4D 2d993067 PUD 19a3c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 3852 Comm: kworker/1:2 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events free_ipc RIP: 0010:kasan_record_aux_stack+0x77/0xb0 Add null checking slab object from kasan_get_alloc_meta() in order to avoid null pointer dereference. [1] https://syzkaller.appspot.com/x/log.txt?x=10a82a50d00000 Link: https://lkml.kernel.org/r/20201228080018.23041-1-walter-zh.wu@mediatek.com Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com> Suggested-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29mm: generalise COW SMC TLB flushing race commentNicholas Piggin1-3/+5
I'm not sure if I'm completely missing something here, but AFAIKS the reference to the mysterious "COW SMC race" confuses the issue. The original changelog and mailing list thread didn't help me either. This SMC race is where the problem was detected, but isn't the general problem bigger and more obvious: that the new PTE could be picked up at any time by any TLB while entries for the old PTE exist in other TLBs before the TLB flush takes effect? The case where the iTLB and dTLB of a CPU are pointing at different pages is an interesting one but follows from the general problem. The other (minor) thing with the comment I think it makes it a bit clearer to say what the old code was doing (i.e., it avoids the race as opposed to what?). References: 4ce072f1faf29 ("mm: fix a race condition under SMC + COW") Link: https://lkml.kernel.org/r/20201215121119.351650-1-npiggin@gmail.com Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suresh Siddha <sbsiddha@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29mm/mremap.c: fix extent calculationKalesh Singh1-1/+3
When `next < old_addr`, `next - old_addr` arithmetic underflows causing `extent` to be incorrect. Make `extent` the smaller of `next - old_addr` or `old_end - old_addr`. Link: https://lkml.kernel.org/r/20201219170433.2418867-1-kaleshsingh@google.com Fixes: c49dd34018026 ("mm: speedup mremap on 1GB or larger regions") Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Helge Deller <deller@gmx.de> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29mm: memmap defer init doesn't work as expectedBaoquan He4-8/+11
VMware observed a performance regression during memmap init on their platform, and bisected to commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") causing it. Before the commit: [0.033176] Normal zone: 1445888 pages used for memmap [0.033176] Normal zone: 89391104 pages, LIFO batch:63 [0.035851] ACPI: PM-Timer IO Port: 0x448 With commit [0.026874] Normal zone: 1445888 pages used for memmap [0.026875] Normal zone: 89391104 pages, LIFO batch:63 [2.028450] ACPI: PM-Timer IO Port: 0x448 The root cause is the current memmap defer init doesn't work as expected. Before, memmap_init_zone() was used to do memmap init of one whole zone, to initialize all low zones of one numa node, but defer memmap init of the last zone in that numa node. However, since commit 73a6e474cb376, function memmap_init() is adapted to iterater over memblock regions inside one zone, then call memmap_init_zone() to do memmap init for each region. E.g, on VMware's system, the memory layout is as below, there are two memory regions in node 2. The current code will mistakenly initialize the whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to iniatialize only one memmory section on the 2nd region [mem 0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's only one memory section's memmap initialized. That's why more time is costed at the time. [ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] [ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] [ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff] [ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff] [ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff] [ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff] Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass down the real zone end pfn so that defer_init() can use it to judge whether defer need be taken in zone wide. Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com Fixes: commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN") Signed-off-by: Baoquan He <bhe@redhat.com> Reported-by: Rahul Gopakumar <gopakumarr@vmware.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29mm: add prototype for __add_to_page_cache_locked()Souptick Joarder1-0/+7
Otherwise it causes a gcc warning: mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes] A previous attempt to make this function static led to compilation errors when CONFIG_DEBUG_INFO_BTF is enabled because __add_to_page_cache_locked() is referred to by BPF code. Adding a prototype will silence the warning. Link: https://lkml.kernel.org/r/1608693702-4665-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29checkpatch: prefer strscpy to strlcpyJoe Perches1-0/+6
Prefer strscpy over the deprecated strlcpy function. Link: https://lkml.kernel.org/r/19fe91084890e2c16fe56f960de6c570a93fa99b.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Requested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29Revert "kbuild: avoid static_assert for genksyms"Masahiro Yamada1-5/+0
This reverts commit 14dc3983b5dff513a90bd5a8cc90acaf7867c3d0. Macro Elver had sent a fix proper fix earlier, and also pointed out corner cases: "I guess what you propose is simpler, but might still have corner cases where we still get warnings. In particular, if some file (for whatever reason) does not include build_bug.h and uses a raw _Static_assert(), then we still get warnings. E.g. I see 1 user of raw _Static_assert() (drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h )." I believe the raw use of _Static_assert() should be allowed, so this should be fixed in genksyms. Even after commit 14dc3983b5df ("kbuild: avoid static_assert for genksyms"), I confirmed the following test code emits the warning. ---------------->8---------------- #include <linux/export.h> _Static_assert((1 ?: 0), ""); void foo(void) { } EXPORT_SYMBOL(foo); ---------------->8---------------- WARNING: modpost: EXPORT symbol "foo" [vmlinux] version generation failed, symbol will not be versioned. Now that commit 869b91992bce ("genksyms: Ignore module scoped _Static_assert()") fixed this issue properly, the workaround should be reverted. Link: https://lkml.org/lkml/2020/12/10/845 Link: https://lkml.kernel.org/r/20201219183911.181442-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29mm/hugetlb: fix deadlock in hugetlb_cow error pathMike Kravetz1-1/+21
syzbot reported the deadlock here [1]. The issue is in hugetlb cow error handling when there are not enough huge pages for the faulting task which took the original reservation. It is possible that other (child) tasks could have consumed pages associated with the reservation. In this case, we want the task which took the original reservation to succeed. So, we unmap any associated pages in children so that they can be used by the faulting task that owns the reservation. The unmapping code needs to hold i_mmap_rwsem in write mode. However, due to commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") we are already holding i_mmap_rwsem in read mode when hugetlb_cow is called. Technically, i_mmap_rwsem does not need to be held in read mode for COW mappings as they can not share pmd's. Modifying the fault code to not take i_mmap_rwsem in read mode for COW (and other non-sharable) mappings is too involved for a stable fix. Instead, we simply drop the hugetlb_fault_mutex and i_mmap_rwsem before unmapping. This is OK as it is technically not needed. They are reacquired after unmapping as expected by calling code. Since this is done in an uncommon error path, the overhead of dropping and reacquiring mutexes is acceptable. While making changes, remove redundant BUG_ON after unmap_ref_private. [1] https://lkml.kernel.org/r/000000000000b73ccc05b5cf8558@google.com Link: https://lkml.kernel.org/r/4c5781b8-3b00-761e-c0c7-c5edebb6ec1a@oracle.com Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: syzbot+5eee4145df3c15e96625@syzkaller.appspotmail.com Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29selftests/vm: fix building protection keys testHarish1-5/+5
Commit d8cbe8bfa7d ("tools/testing/selftests/vm: fix build error") tried to include a ARCH check for powerpc, however ARCH is not defined in the Makefile before including lib.mk. This makes test building to skip on both x86 and powerpc. Fix the arch check by replacing it using machine type as it is already defined and used in the test. Link: https://lkml.kernel.org/r/20201215100402.257376-1-harish@linux.ibm.com Fixes: d8cbe8bfa7d ("tools/testing/selftests/vm: fix build error") Signed-off-by: Harish <harish@linux.ibm.com> Reviewed-by: Sandipan Das <sandipan@linux.ibm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Sandipan Das <sandipan@linux.ibm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-29io_uring: don't assume mm is constant across submitsJens Axboe1-7/+7
If we COW the identity, we assume that ->mm never changes. But this isn't true of multiple processes end up sharing the ring. Hence treat id->mm like like any other process compontent when it comes to the identity mapping. This is pretty trivial, just moving the existing grab into io_grab_identity(), and including a check for the match. Cc: stable@vger.kernel.org # 5.10 Fixes: 1e6fa5216a0e ("io_uring: COW io_identity on mismatch") Reported-by: Christian Brauner <christian.brauner@ubuntu.com>: Tested-by: Christian Brauner <christian.brauner@ubuntu.com>: Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-28Revert "dm crypt: export sysfs of kcryptd workqueue"Mike Snitzer1-4/+3
This reverts commit a2b8b2d975673b1a50ab0bcce5d146b9335edfad. WQ_SYSFS breaks the ability to reload a DM table due to sysfs kobject collision (due to active and inactive table). Given lack of demonstrated need for exposing this workqueue via sysfs: revert exposing it. Reported-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-12-28libceph: add __maybe_unused to DEFINE_MSGR2_FEATUREIlya Dryomov1-2/+2
Avoid -Wunused-const-variable warnings for "make W=1". Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-28libceph: align session_key and con_secret to 16 bytesIlya Dryomov1-2/+10
crypto_shash_setkey() and crypto_aead_setkey() will do a (small) GFP_ATOMIC allocation to align the key if it isn't suitably aligned. It's not a big deal, but at the same time easy to avoid. The actual alignment requirement is dynamic, queryable with crypto_shash_alignmask() and crypto_aead_alignmask(), but shouldn't be stricter than 16 bytes for our algorithms. Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)") Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-28libceph: fix auth_signature buffer allocation in secure modeIlya Dryomov1-1/+2
auth_signature frame is 68 bytes in plain mode and 96 bytes in secure mode but we are requesting 68 bytes in both modes. By luck, this doesn't actually result in any invalid memory accesses because the allocation is satisfied out of kmalloc-96 slab and so exactly 96 bytes are allocated, but KASAN rightfully complains. Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)") Reported-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-12-28ceph: reencode gid_list when reconnectingIlya Dryomov1-31/+22
On reconnect, cap and dentry releases are dropped and the fields that follow must be reencoded into the freed space. Currently these are timestamp and gid_list, but gid_list isn't reencoded. This results in failed to decode message of type 24 v4: End of buffer errors on the MDS. While at it, make a change to encode gid_list unconditionally, without regard to what head/which version was used as a result of checking whether CEPH_FEATURE_FS_BTIME is supported or not. URL: https://tracker.ceph.com/issues/48618 Fixes: 4f1ddb1ea874 ("ceph: implement updated ceph_mds_request_head structure") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2020-12-28opp: Call the missing clk_put() on errorViresh Kumar1-1/+4
Fix the clock reference counting by calling the missing clk_put() in the error path. Cc: v5.10 <stable@vger.kernel.org> # v5.10 Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-28opp: fix memory leak in _allocate_opp_tableQuanyang Wang1-2/+4
In function _allocate_opp_table, opp_dev is allocated and referenced by opp_table via _add_opp_dev. But in the case that the subsequent calls return -EPROBE_DEFER, it will jump to err label and opp_table will be freed. Then opp_dev becomes an unreferenced object to cause memory leak. So let's call _remove_opp_dev to do the cleanup. This fixes the following kmemleak report: unreferenced object 0xffff000801524a00 (size 128): comm "swapper/0", pid 1, jiffies 4294892465 (age 84.616s) hex dump (first 32 bytes): 40 00 56 01 08 00 ff ff 40 00 56 01 08 00 ff ff @.V.....@.V..... b8 52 77 7f 08 00 ff ff 00 3c 4c 00 08 00 ff ff .Rw......<L..... backtrace: [<00000000b1289fb1>] kmemleak_alloc+0x30/0x40 [<0000000056da48f0>] kmem_cache_alloc+0x3d4/0x588 [<00000000a84b3b0e>] _add_opp_dev+0x2c/0x88 [<0000000062a380cd>] _add_opp_table_indexed+0x124/0x268 [<000000008b4c8f1f>] dev_pm_opp_of_add_table+0x20/0x1d8 [<00000000e5316798>] dev_pm_opp_of_cpumask_add_table+0x48/0xf0 [<00000000db0a8ec2>] dt_cpufreq_probe+0x20c/0x448 [<0000000030a3a26c>] platform_probe+0x68/0xd8 [<00000000c618e78d>] really_probe+0xd0/0x3a0 [<00000000642e856f>] driver_probe_device+0x58/0xb8 [<00000000f10f5307>] device_driver_attach+0x74/0x80 [<0000000004f254b8>] __driver_attach+0x58/0xe0 [<0000000009d5d19e>] bus_for_each_dev+0x70/0xc8 [<0000000000d22e1c>] driver_attach+0x24/0x30 [<0000000001d4e952>] bus_add_driver+0x14c/0x1f0 [<0000000089928aaa>] driver_register+0x64/0x120 Cc: v5.10 <stable@vger.kernel.org> # v5.10 Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> [ Viresh: Added the stable tag ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-27Linux 5.11-rc1Linus Torvalds1-2/+2
2020-12-27proc mountinfo: make splice available againLinus Torvalds1-3/+6
Since commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") we've required that file operation structures explicitly enable splice support, rather than falling back to the default handlers. Most /proc files use the indirect 'struct proc_ops' to describe their file operations, and were fixed up to support splice earlier in commits 40be821d627c..b24c30c67863, but the mountinfo files interact with the VFS directly using their own 'struct file_operations' and got missed as a result. This adds the necessary support for splice to work for /proc/*/mountinfo and friends. Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com> Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-26mfd: ab8500-debugfs: Remove extraneous seq_putcLinus Torvalds1-1/+0
Commit c9a3c4e637ac ("mfd: ab8500-debugfs: Remove extraneous curly brace") removed a left-over curly brace that caused build failures, but Joe Perches points out that the subsequent 'seq_putc()' should also be removed, because the commit that caused all these problems already added the final '\n' to the seq_printf() above it. Reported-by: Joe Perches <joe@perches.com> Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25mfd: ab8500-debugfs: Remove extraneous curly braceNathan Chancellor1-1/+0
Clang errors: drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type] } ^ drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '(' return 0; ^ drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}') } ^ 3 errors generated. The cleanup in ab8500_interrupts_show left a curly brace around, remove it to fix the error. Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25PCI: dwc: Fix inverted condition of DMA mask setup warningAlexander Lobakin1-6/+2
Commit 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask for MSI message mapping, but for now it throws a warning on ret == 0, while dma_set_mask() returns 0 in case of success. Fix this by inverting the condition. [bhelgaas: join string to make it greppable] Fixes: 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.me Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-25PCI: tegra: Fix host link initializationRob Herring1-26/+29
Commit b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") broke enumeration of downstream devices on Tegra: In non-working case (next-20201211): 0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1) In working case (v5.10-rc7): 0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1) 0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab) The problem seems to be dw_pcie_setup_rc() is now called twice before and after the link up handling. The fix is to move Tegra's link up handling to .start_link() function like other DWC drivers. Tegra is a bit more complicated than others as it re-inits the whole DWC controller to retry the link. With this, the initialization ordering is restored to match the prior sequence. Fixes: b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.org Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Vidya Sagar <vidyas@nvidia.com>
2020-12-25drm/amd/display: avoid uninitialized variable warningLinus Torvalds1-1/+1
clang (quite rightly) complains fairly loudly about the newly added mpc1_get_mpc_out_mux() function returning an uninitialized value if the 'opp_id' checks don't pass. This may not happen in practice, but the code really shouldn't return garbage if the sanity checks don't pass. So just initialize 'val' to zero to avoid the issue. Fixes: 110b055b2827 ("drm/amd/display: add getter routine to retrieve mpcc mux") Cc: Josip Pavic <Josip.Pavic@amd.com> Cc: Bindu Ramamurthy <bindu.r@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25genirq: Fix export of irq_to_desc() for powerpc KVMMichael Ellerman1-1/+1
Commit 64a1b95bb9fe ("genirq: Restrict export of irq_to_desc()") removed the export of irq_to_desc() unless powerpc KVM is being built, because there is still a use of irq_to_desc() in modular code there. However it used: #ifdef CONFIG_KVM_BOOK3S_64_HV Which doesn't work when that symbol is =m, leading to a build failure: ERROR: modpost: "irq_to_desc" [arch/powerpc/kvm/kvm-hv.ko] undefined! Fix it by checking for the definedness of the correct symbol which is CONFIG_KVM_BOOK3S_64_HV_MODULE. Fixes: 64a1b95bb9fe ("genirq: Restrict export of irq_to_desc()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-24device-dax: Avoid an unnecessary check in alloc_dev_dax_range()Zhen Lei1-14/+6
Swap the calling sequence of krealloc() and __request_region(), call the latter first. In this way, the value of dev_dax->nr_range does not need to be considered when __request_region() failed. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201219081840.1149-2-thunder.leizhen@huawei.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.