aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2006-03-23[PATCH] cciss: fix use-after-free in cciss_init_onePatrick McHardy1-1/+1
free_hba() sets hba[i] to NULL, the dereference afterwards results in this crash. Setting busy_initializing to 0 actually looks unnecessary, but I'm not entirely sure, which is why I left it in. cciss: controller appears to be disabled Unable to handle kernel NULL pointer dereference at virtual address 00000370 printing eip: c1114d53 *pde = 00000000 Oops: 0002 [#1] Modules linked in: CPU: 0 EIP: 0060:[<c1114d53>] Not tainted VLI EFLAGS: 00010286 (2.6.16 #1) EIP is at cciss_init_one+0x4e9/0x4fe eax: 00000000 ebx: c132cd60 ecx: c13154e4 edx: c27d3c00 esi: 00000000 edi: c2748800 ebp: c2536ee4 esp: c2536eb8 ds: 007b es: 007b ss: 0068 Process swapper (pid: 1, threadinfo=c2536000 task=c2535a30) Stack: <0>00000000 00000000 00000000 c13fdba0 c2536ee8 c13159c0 c2536f38 f7c74740 c132cd60 c132cd60 ffffffed c2536ef0 c10c1d51 c2748800 c2536f04 c10c1d85 c132cd60 c2748800 c132cd8c c2536f14 c10c1db8 c2748848 00000000 c2536f28 Call Trace: [<c10031d5>] show_stack_log_lvl+0xa8/0xb0 [<c1003305>] show_registers+0x102/0x16a [<c10034a2>] die+0xc1/0x13c [<c1288160>] do_page_fault+0x38a/0x525 [<c1002e9b>] error_code+0x4f/0x54 [<c10c1d51>] pci_call_probe+0xd/0x10 [<c10c1d85>] __pci_device_probe+0x31/0x43 [<c10c1db8>] pci_device_probe+0x21/0x34 [<c110a654>] driver_probe_device+0x44/0x99 [<c110a73f>] __driver_attach+0x39/0x5d [<c1109e1c>] bus_for_each_dev+0x35/0x5a [<c110a777>] driver_attach+0x14/0x16 [<c110a220>] bus_add_driver+0x5c/0x8f [<c110ab22>] driver_register+0x73/0x78 [<c10c1f6d>] __pci_register_driver+0x5f/0x71 [<c13bf935>] cciss_init+0x1a/0x1c [<c13aa718>] do_initcalls+0x4c/0x96 [<c13aa77e>] do_basic_setup+0x1c/0x1e [<c10002b1>] init+0x35/0x118 [<c1000cf5>] kernel_thread_helper+0x5/0xb Code: 04 b5 e0 de 40 c1 8d 50 04 8b 40 34 e8 3f b7 f9 ff 8b 04 b5 e0 de 40 c1 e8 aa f3 ff ff 89 f0 e8 e8 fa ff ff 8b 04 b5 e0 de 40 c1 <c7> 80 70 03 00 00 00 00 00 00 83 c8 ff 8d 65 f4 5b 5e 5f 5d c3 <0>Kernel panic - not syncing: Attempted to kill init! Signed-off-by: Patrick McHardy <kaber@trash.net> Cc: <mike.miller@hp.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds10-19/+12
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (78 commits) [PATCH] powerpc: Add FSL SEC node to documentation [PATCH] macintosh: tidy-up driver_register() return values [PATCH] powerpc: tidy-up of_register_driver()/driver_register() return values [PATCH] powerpc: via-pmu warning fix [PATCH] macintosh: cleanup the use of i2c headers [PATCH] powerpc: dont allow old RTC to be selected [PATCH] powerpc: make powerbook_sleep_grackle static [PATCH] powerpc: Fix warning in add_memory [PATCH] powerpc: update mailing list addresses [PATCH] powerpc: Remove calculation of io hole [PATCH] powerpc: iseries: Add bootargs to /chosen [PATCH] powerpc: iseries: Add /system-id, /model and /compatible [PATCH] powerpc: Add strne2a() to convert a string from EBCDIC to ASCII [PATCH] powerpc: iseries: Make more stuff static in platforms/iseries/mf.c [PATCH] powerpc: iseries: Remove pointless iSeries_(restart|power_off|halt) [PATCH] powerpc: iseries: mf related cleanups [PATCH] powerpc: Replace platform_is_lpar() with a firmware feature [PATCH] powerpc: trivial: Cleanup whitespace in cputable.h [PATCH] powerpc: Remove unused iommu_off logic from pSeries_init_early() [PATCH] powerpc: Unconfuse htab_bolt_mapping() callers ...
2006-03-23[PATCH] macintosh: tidy-up driver_register() return valuesBjorn Helgaas1-4/+1
Remove the assumption that driver_register() returns the number of devices bound to the driver. In fact, it returns zero for success or a negative error value. All callers of macio_register_driver() either ignore the return value or return it as the return value of a module_init() function. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23[PATCH] powerpc: tidy-up of_register_driver()/driver_register() return valuesBjorn Helgaas1-3/+1
Remove the assumption that driver_register() returns the number of devices bound to the driver. In fact, it returns zero for success or a negative error value. Nobody uses the return value of of_register_driver() anyway. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23[PATCH] powerpc: via-pmu warning fixAndrew Morton1-0/+2
drivers/macintosh/via-pmu.c:164: warning: `sleep_in_progress' defined but not used Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23[PATCH] macintosh: cleanup the use of i2c headersJean Delvare4-5/+0
Cleanup the use of i2c headers in macintosh drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23[PATCH] powerpc: dont allow old RTC to be selectedAnton Blanchard1-1/+1
Now powerpc uses the generic RTC stuff we should not enable the old RTC. Doing so will result in hangs at boot. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23[PATCH] powerpc: make powerbook_sleep_grackle staticOlaf Hering1-2/+1
powerbook_sleep_grackle is only called inside via-pmu, from pmu_ioctl() Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6Linus Torvalds10-136/+104
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Use of uninitialized variable in drivers/net/depca.c [PATCH] Use after free in net/tulip/de2104x.c [PATCH] sis900 adm7001 PHY support [PATCH] sky2: more ethtool stats [PATCH] s390: qeth :allow setting of attribute "route6" to "no_router". [PATCH] s390: qeth driver cleanups [PATCH] s390: qeth driver statistics fixes [PATCH] AMD Au1xx0: fix Ethernet TX stats [PATCH] fix spidernet build issue
2006-03-22scsi: link in the debug driver lastLinus Torvalds1-1/+3
If the debug driver is built-in, link it in last, so that any real drivers will probe first, rather than having the debug driver pick the first scsi slots.. Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds25-358/+205
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Merge avlab serial board entries in parport_serial [SERIAL] kernel console should send CRLF not LFCR
2006-03-22Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-2/+2
* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) [ARM] 3389/1: typo and grammar fix [ARM] 3386/1: AT91RM9200 Clock update [ARM] 3384/1: AT91RM9200: Timer [ARM] 3382/1: ixp2000: unify defconfigs [ARM] 3381/1: ixp2000: fix slowport write timing control register fields [ARM] 3380/1: ixp2000: simplify ixdp2x00_master_npu() check [ARM] 3379/1: ixp2000: use generic 8250 debug macros [ARM] 3378/1: ixp2000: fix gpio interrupt handling [ARM] Quieten spurious IRQ detection [ARM] Use kcalloc to allocate counter_config array rather than kmalloc [ARM] Oprofile: dynamically allocate counter_config [ARM] Oprofile: Convert semaphore to mutex [ARM] 3376/2: S3C2410 - update defconfig [ARM] 3375/1: S3C2440 - fix osiris machine build [ARM] 3374/1: ep93xx: gpio interrupt support [ARM] 3361/1: S3C24XX - add USB bus clock source [ARM] 3360/1: S3C2440 - add set rate methods and camera clock [ARM] 3359/1: S3C24XX - add support for clk_set_rate [ARM] Convert kmalloc+memset to kzalloc [ARM] 3373/1: move uengine loader to arch/arm/common ...
2006-03-22[PATCH] Use of uninitialized variable in drivers/net/depca.cEric Sesterhenn1-1/+1
hi, this fixes coverity bug #888, where the variable dev is used uninitialized. I assume the programmer meant to use mdev, which is initialized. Compile tested only. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] Use after free in net/tulip/de2104x.cEric Sesterhenn1-1/+1
hi, this fixes coverity bug #912, where skb is freed first, and dereferenced a few lines later with skb->len. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] sis900 adm7001 PHY supportArtur Skawina1-0/+1
this patch is required to get a SIS964 based motherboard ethernet working (FSC D1875) (picking the #1 transceiver, instead of the last one, in case no known ones were found might be a better default, and would have worked in this case too) Signed-off-by: Artur Skawina <art_k@o2.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] sky2: more ethtool statsStephen Hemminger2-41/+57
Expose all the available hardware statistics via ethtool. And cleanup some of the statistics definitions. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] s390: qeth :allow setting of attribute "route6" to "no_router".Frank Pavlic1-5/+0
[patch 4/6] s390: qeth :allow setting of attribute "route6" to "no_router". From: Ursula Braun <braunu@de.ibm.com> when setting route6 attribute back to no_router qeth does not issue an IP ASSIST command to reset router value to no_router. Once primary_router is set device stays in this mode. Issue an IP ASSIST command when no_router is set in route6. Device will be reset and thus will not longer run as a primary router. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 5 ----- 1 files changed, 5 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] s390: qeth driver cleanupsFrank Pavlic3-55/+14
[patch 3/6] s390: qeth driver cleanups From: Ursula Braun <braunu@de.ibm.com> - code analyzing tool BEAM has found some unreachable and unnecessary statements and also conditions which are always true. - removed some useless MII code since OSA card will never allow to set such values. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 49 ++++--------------------------------------------- qeth_proc.c | 18 +++++++++--------- qeth_sys.c | 2 +- 3 files changed, 14 insertions(+), 55 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] s390: qeth driver statistics fixesFrank Pavlic2-20/+21
[patch 2/6] s390: qeth driver statistics fixes From: Ursula Braun <braunu@de.ibm.com> - display "unsigned int" values in /proc/qeth_perf with %u instead of %i - omit qdio header length when increasing card->stats.tx_bytes Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 3 ++- qeth_proc.c | 38 +++++++++++++++++++------------------- 2 files changed, 21 insertions(+), 20 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] AMD Au1xx0: fix Ethernet TX statsSergei Shtylylov1-11/+7
With Au1xx0 Ethernet driver, TX bytes/packets always remain zero. The problem seems to be that when packet has been transmitted, the length word in DMA buffer is zero. The patch updates the TX stats when a buffer is fed to DMA. The initial 2.4 patch was posted to linux-mips@linux-mips.org by Thomas Lange 21 Jan 2005. Signed-off-by: Thomas Lange <thomas@corelatus.se> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] fix spidernet build issueJens Osterkamp1-2/+2
<unchangelogged> Signed-off-by: Jens Osterkamp <Jens.Osterkamp@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] ahci: add softresetTejun Heo1-1/+134
Now that libata is smart enought to handle both soft and hard resets, add softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] libata: do not ignore PIO-only devicesTejun Heo1-7/+0
As libata now can do PIO, don't ignore PIO-only devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] libata: Symbol exportsAlan Cox1-0/+2
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] Update libata DMA blacklist to cover versions, and resync with IDE layerAlan Cox1-35/+59
Not much to say here except that some drives have fixed and bad firmware Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] libata: Fix a drive detection problemAlan Cox1-0/+10
The current code follows the spec but uses an overlong delay. This would be great if the hardware did. Several vendors however forget the D7 pulldown. Fortunately 0xFF isnt a sane reset state so we can use it to skip detection as is done in drivers/ide. (ie this is a tested solution over a long time) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22[PATCH] libata: note missing posting in mmio cmd writeAlan Cox1-0/+2
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22Merge branch 'master'Jeff Garzik142-42897/+35717
2006-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds3-55/+66
* git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (124 commits) [ALSA] version 1.0.11rc4 [PATCH] Intruduce DMA_28BIT_MASK [ALSA] hda-codec - Add support for ASUS P4GPL-X [ALSA] hda-codec - Add support for HP nx9420 laptop [ALSA] Fix memory leaks in error path of control.c [ALSA] AMD Au1x00: AC'97 controller is memory mapped [ALSA] AMD Au1x00: fix DMA init/cleanup [ALSA] hda-codec - Fix generic auto-configurator [ALSA] hda-codec - Fix BIOS auto-configuration [ALSA] Fixes typos in Audiophile-USB.txt [ALSA] ice1712 - typo fixes for dxr_enable module option [ALSA] AMD Au1x00: make driver build after cleanup [ALSA] ice1712 - Fix wrong value types for enum items [ALSA] fix resource leak in usbmixer [ALSA] Fix gus_pcm dereference before NULL [ALSA] Fix seq_clientmgr dereferences before NULL check [ALSA] hda-codec - Fix for Samsung R65 and ASUS A6J [ALSA] hda-codec - Add support for VAIO FE550G and SZ110 [ALSA] usb-audio: add Maya44 mixer control names [ALSA] usb-audio: add Casio PL-40R support ...
2006-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds5-5/+5
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: fixed path to moved file in include/linux/device.h Fix spelling in E1000_DISABLE_PACKET_SPLIT Kconfig description Documentation/dvb/get_dvb_firmware: fix firmware URL Documentation: Update to BUG-HUNTING Remove superfluous NOTIFY_COOKIE_LEN define add "tags" to .gitignore Fix "frist", "fisrt", typos fix rwlock usage example It's UTF-8
2006-03-22Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds4-9/+5
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add a secondary TSB for hugepage mappings. [SPARC]: Respect vm_page_prot in io_remap_page_range().
2006-03-22Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-7/+25
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TG3]: Bump driver version and reldate. [TG3]: Skip phy power down on some devices [TG3]: Fix SRAM access during tg3_init_one() [X25]: dte facilities 32 64 ioctl conversion [X25]: allow ITU-T DTE facilities for x25 [X25]: fix kernel error message 64 bit kernel [X25]: ioctl conversion 32 bit user to 64 bit kernel [NET]: socket timestamp 32 bit handler for 64 bit kernel [NET]: allow 32 bit socket ioctl in 64 bit kernel [BLUETOOTH]: Return negative error constant
2006-03-22Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds119-42667/+35378
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (138 commits) [SCSI] libata: implement minimal transport template for ->eh_timed_out [SCSI] eliminate rphy allocation in favour of expander/end device allocation [SCSI] convert mptsas over to end_device/expander allocations [SCSI] allow displaying and setting of cache type via sysfs [SCSI] add scsi_mode_select to scsi_lib.c [SCSI] 3ware 9000 add big endian support [SCSI] qla2xxx: update MAINTAINERS [SCSI] scsi: move target_destroy call [SCSI] fusion - bump version [SCSI] fusion - expander hotplug suport in mptsas module [SCSI] fusion - exposing raid components in mptsas [SCSI] fusion - memory leak, and initializing fields [SCSI] fusion - exclosure misspelled [SCSI] fusion - cleanup mptsas event handling functions [SCSI] fusion - removing target_id/bus_id from the VirtDevice structure [SCSI] fusion - static fix's [SCSI] fusion - move some debug firmware event debug msgs to verbose level [SCSI] fusion - loginfo header update [SCSI] add scsi_reprobe_device [SCSI] megaraid_sas: fix extended timeout handling ...
2006-03-22[PATCH] remove set_page_count() outside mm/Nick Piggin1-1/+1
set_page_count usage outside mm/ is limited to setting the refcount to 1. Remove set_page_count from outside mm/, and replace those users with init_page_count() and set_page_refcounted(). This allows more debug checking, and tighter control on how code is allowed to play around with page->_count. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] sg: use compound pagesNick Piggin1-34/+3
sg increments the refcount of constituent pages in its higher order memory allocations when they are about to be mapped by userspace. This is done so the subsequent get_page/put_page when doing the mapping and unmapping does not free the page. Move over to the preferred way, that is, using compound pages instead. This fixes a whole class of possible obscure bugs where a get_user_pages on a constituent page may outlast the user mappings or even the driver. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Cc: Douglas Gilbert <dougg@torque.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] slab: Remove SLAB_NO_REAP optionChristoph Lameter1-1/+1
SLAB_NO_REAP is documented as an option that will cause this slab not to be reaped under memory pressure. However, that is not what happens. The only thing that SLAB_NO_REAP controls at the moment is the reclaim of the unused slab elements that were allocated in batch in cache_reap(). Cache_reap() is run every few seconds independently of memory pressure. Could we remove the whole thing? Its only used by three slabs anyways and I cannot find a reason for having this option. There is an additional problem with SLAB_NO_REAP. If set then the recovery of objects from alien caches is switched off. Objects not freed on the same node where they were initially allocated will only be reused if a certain amount of objects accumulates from one alien node (not very likely) or if the cache is explicitly shrunk. (Strangely __cache_shrink does not check for SLAB_NO_REAP) Getting rid of SLAB_NO_REAP fixes the problems with alien cache freeing. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] dcdbas: convert to the new platform device interfaceDmitry Torokhov1-22/+88
Do not use platform_device_register_simple() as it is going away, define dcdbas_driver and implement ->probe() and ->remove() functions so manual binding and unbinding will work with this driver. Also switch to using attribute_group when creating sysfs attributes and make sure to check and handle errors; explicitely remove attributes when detaching driver. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] tb0219: convert to the new platform device interfaceDmitry Torokhov1-9/+15
Do not use platform_device_register_simple() as it is going away. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] mv64x600_wdt: convert to the new platform device interfaceDmitry Torokhov1-5/+15
mv64x600_wdt: convert to the new platform device interface Do not use platform_device_register_simple() as it is going away. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] vr41xx: convert to the new platform device interfaceDmitry Torokhov3-25/+48
The patch does the following for v441xx seris drivers: - stop using platform_device_register_simple() as it is going away - mark ->probe() and ->remove() methods as __devinit and __devexit respectively - initialize "owner" field in driver structure so there is a link from /sys/modules to the driver - mark *_init() and *_exit() functions as __init and __exit Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] serial: serial_txx9 driver updateAtsushi Nemoto2-37/+42
Update the serial_txx9 driver. * More strict check in verify_port. Cleanup. * Do not insert a char caused previous overrun. * Fix some spin_locks. * Do not call uart_add_one_port for absent ports. Also, this patch removes a BROKEN tag from Kconfig. This driver has been marked as BROKEN by removal of uart_register_port, but it has been solved already on Sep 2005. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] dm: bio split bvec fixAlasdair G Kergon1-19/+24
The code that handles bios that span table target boundaries by breaking them up into smaller bios will not split an individual struct bio_vec into more than two pieces. Sometimes more than that are required. This patch adds a loop to break the second piece up into as many pieces as are necessary. Cc: "Abhishek Gupta" <abhishekgupt@gmail.com> Cc: Dan Smith <danms@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] i810fb_cursor(): use GFP_ATOMICAntonino A. Daplas1-1/+1
The console cursor can be called in atomic context. Change memory allocation to use the GFP_ATOMIC flag in i810fb_cursor(). Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22Merge branch 'master'Jeff Garzik3-32/+46
2006-03-22Merge with rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitJaroslav Kysela432-20518/+32250
2006-03-22[ALSA] Fix snd_xxx_t typedefsTakashi Iwai3-55/+66
Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver Replace snd_xxx_t typedefs with explicit structs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[SPARC]: Respect vm_page_prot in io_remap_page_range().David S. Miller4-9/+5
Make sure the callers do a pgprot_noncached() on vma->vm_page_prot. Pointed out by Hugh Dickens. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22[TG3]: Bump driver version and reldate.David S. Miller1-2/+2
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22[TG3]: Skip phy power down on some devicesMichael Chan1-2/+14
Some PHYs should not be powered down in tg3_set_power_state() because of bugs or other hardware limitations. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22[TG3]: Fix SRAM access during tg3_init_one()Michael Chan1-3/+9
5700 and 5701 will not return correct SRAM data when the chip is in D3hot power state. tg3_get_eeprom_hw_cfg() must first put the device in D0 before reading SRAM. Thanks to Thomas Chenault at Dell for noticing this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.