aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-30IB/cm: Remove compare_data checksHaggai Eran4-95/+21
Now that there are no ib_cm clients using the compare_data feature for matching IB CM requests' private data, remove the compare_data parameter of ib_cm_listen and remove the code implementing the feature. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cma: Share ib_cm_ids between rdma_cm_idsHaggai Eran1-55/+4
Use ib_cm_insert_listen to create listening IB CM IDs or share existing ones if needed. When given a request on a specific CM ID, the code now matches the request to the RDMA CM ID based on the request parameters, so it no longer needs to rely on the ib_cm's private data matching capabilities. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cma: Use found net_dev for passive connectionsHaggai Eran1-27/+49
When receiving a new connection in cma_req_handler, we actually already know the net_dev that is used for the connection's creation. Instead of calling cma_translate_addr to resolve the new connection id's source address, just use the net_dev that was found. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cma: Validate routing of incoming requestsHaggai Eran1-3/+92
Pass incoming request parameters through the relevant IPv4/IPv6 routing tables and make sure the network stack is configured to handle such requests. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cma: Add net_dev and private data checks to RDMA CMHaggai Eran1-3/+185
Instead of relying on a the ib_cm module to check an incoming CM request's private data header, add these checks to the RDMA CM module. This allows a following patch to to clean up the ib_cm interface and remove the code that looks into the private headers. It will also allow supporting namespaces in RDMA CM by making these checks namespace aware later on. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cm: Expose BTH P_Key in CM and SIDR request eventsHaggai Eran1-0/+20
The rdma_cm module will later use the P_Key from the BTH to de-mux requests. See discussion at: http://www.spinics.net/lists/netdev/msg336067.html Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Liran Liss <liranl@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cma: Helper functions to access port space IDRsHaggai Eran1-21/+60
Add helper functions to access the IDRs by port-space and port number. Pass around the port-space enum in cma.c instead of using pointers to port-space IDRs. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Yotam Kenneth <yotamke@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cma: Refactor RDMA IP CM private-data parsing codeHaggai Eran1-65/+105
When receiving a connection request, rdma_cm needs to associate the request with a network device, in order to disambiguate requests. To do this, it needs to know the request's destination IP. For this the module needs to allow getting this information from the private data in the request packet, instead of relying on the information already being in the listening RDMA CM ID. When creating a new incoming connection ID, the code in cma_save_ip{4,6}_info can no longer rely on the listener's private data to find the port number, so it reads it from the requested service ID. Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Yotam Kenneth <yotamke@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cm: Share listening CM IDsHaggai Eran1-6/+116
Enabling network namespaces for RDMA CM will allow processes on different namespaces to listen on the same port. In order to leave namespace support out of the CM layer, this requires that multiple RDMA CM IDs will be able to share a single CM ID. This patch adds infrastructure to retrieve an existing listening ib_cm_id, based on its device and service ID, or create a new one if one does not already exist. It also adds a reference count for such instances (cm_id_private.listen_sharecount), and prevents cm_destroy_id from destroying a CM if it is still shared. See the relevant discussion [1]. [1] Re: [PATCH v3 for-next 05/13] IB/cm: Reference count ib_cm_ids http://www.spinics.net/lists/netdev/msg328860.html Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/cm: Expose service ID in request eventsHaggai Eran1-0/+3
Expose the service ID on an incoming CM or SIDR request to the event handler. This will allow the RDMA CM module to de-multiplex connection requests based on the information encoded in the service ID. Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/ipoib: Return IPoIB devices matching connection parametersGuy Shapiro1-1/+228
Implement the get_net_device_by_port_pkey_ip callback that returns network device to ib_core according to connection parameters. Check the ipoib device and iterate over all child devices to look for a match. For each IPoIB device we iterate through all upper devices when searching for a matching IP, in order to support bonding. Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Yotam Kenneth <yotamke@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/core: Find the network device matching connection parametersYotam Kenneth1-0/+46
In the case of IPoIB, and maybe in other cases, the network device is managed by an upper-layer protocol (ULP). In order to expose this network device to other users of the IB device, let ULPs implement a callback that returns network device according to connection parameters. The IB device and port, together with the P_Key and the GID should be enough to uniquely identify the ULP net device. However, in current kernels there can be multiple IPoIB interfaces created with the same GID. Furthermore, such configuration may be desireable to support ipvlan-like configurations for RDMA CM with IPoIB. To resolve the device in these cases the code will also take the IP address as an additional input. Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Yotam Kenneth <yotamke@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Guy Shapiro <guysh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/core: lock client data with lists_rwsemHaggai Eran13-45/+75
An ib_client callback that is called with the lists_rwsem locked only for read is protected from changes to the IB client lists, but not from ib_unregister_device() freeing its client data. This is because ib_unregister_device() will remove the device from the device list with lists_rwsem locked for write, but perform the rest of the cleanup, including the call to remove() without that lock. Mark client data that is undergoing de-registration with a new going_down flag in the client data context. Lock the client data list with lists_rwsem for write in addition to using the spinlock, so that functions calling the callback would be able to lock only lists_rwsem for read and let callbacks sleep. Since ib_unregister_client() now marks the client data context, no need for remove() to search the context again, so pass the client data directly to remove() callbacks. Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-30IB/core: Add rwsem to allow reading device list or client listHaggai Eran1-12/+28
Currently the RDMA subsystem's device list and client list are protected by a single mutex. This prevents adding user-facing APIs that iterate these lists, since using them may cause a deadlock. The patch attempts to solve this problem by adding a read-write semaphore to protect the lists. Readers now don't need the mutex, and are safe just by read-locking the semaphore. The ib_register_device, ib_register_client, ib_unregister_device, and ib_unregister_client functions are modified to lock the semaphore for write during their respective list modification. Also, in order to make sure client callbacks are called only between add() and remove() calls, the code is changed to only add items to the lists after the add() calls and remove from the lists before the remove() calls. This patch attempts to solve a similar need [1] that was seen in the RoCE v2 patch series. [1] http://www.spinics.net/lists/linux-rdma/msg24733.html Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Matan Barak <matanb@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28ipath,qib: Expose max_sge_rd correctlySteve Wise2-0/+2
Applications must not assume that max_sge and max_sge_rd are the same, Hence expose max_sge_rd correctly as well. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28mlx4, mlx5, mthca: Expose max_sge_rd correctlySagi Grimberg3-0/+3
Applications must not assume that max_sge and max_sge_rd are the same, Hence expose max_sge_rd correctly as well. Reported-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28staging/hfi1: replace indent spaces with tabsJeff Becker1-5/+5
Running checkpatch.pl on mad.c produces several "ERROR: code indent should use tabs where possible" messages. This patch fixes these. Signed-off-by: Jeff Becker <Jeffrey.C.Becker@nasa.gov> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28IB/hfi1: add driver filesMike Marciniszyn58-0/+57454
Signed-off-by: Andrew Friedley <andrew.friedley@intel.com> Signed-off-by: Arthur Kepner <arthur.kepner@intel.com> Signed-off-by: Brendan Cunningham <brendan.cunningham@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jim Snow <jim.m.snow@intel.com> Signed-off-by: John Gregor <john.a.gregor@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Kevin Pine <kevin.pine@intel.com> Signed-off-by: Kyle Liddell <kyle.liddell@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Ravi Krishnaswamy <ravi.krishnaswamy@intel.com> Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Sanath Kumar <sanath.s.kumar@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Vlad Danushevsky <vladimir.danusevsky@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28IB/core: Add core header changes needed for OPADennis Dalessandro1-139/+8
This patch adds the value of the CNP opcode to the existing list of enumerated opcodes in ib_pack.h Add common OPA header definitions for driver build: - opa_port_info.h - opa_smi.h - hfi1_user.h Additionally, ib_mad.h, has additional definitions that are common to ib_drivers including: - trap support - cca support The qib driver has the duplication removed in favor those in ib_mad.h Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: John, Jubin <jubin.john@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28RDMA/amso1100: Deprecate the amso1100 driver and move to stagingSteve Wise28-2/+7
The HW hasn't been sold since 2005, and the SW has definite bit rot. Its time to remove it. So move it to staging for a few releases and then remove it after that. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28IB/ipath: Deprecate ipath driver and move to staging.Dennis Dalessandro42-3/+11
It is now time for the ipath driver to begin to be phased out of the kernel. This patch moves the ipath driver from the Infiniband sub tree to the staging area where it will remain until the code is removed from the kernel in a few releases. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28Staging: Add staging/rdma directory and update MAINTAINERSDoug Ledford4-0/+29
Create the rdma directory in the staging area for use as we deprecate some older drivers and as we bring in some new drivers that are in need of work. Update the MAINTAINERS file so that updates to these files go to linux-rdma@vger.kernel.org. Expected lifespan of this directory is three releases for any deprecated drivers moved here and an unknown, but theoretically bounded amount of time for the new drivers as a new core RDMA transfer library needs to be written and the drivers modified to use it in order for them to move out of this directory. Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28iw_cxgb4: Add support for clipHariprasad S1-4/+72
Add support for ipv6 address handling clip api provided by lld Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28RDMA/cma: fix IPv6 address resolutionSpencer Baugh1-2/+5
Resolving a link-local IPv6 address with an unspecified source address was broken by commit 5462eddd7a, which prevented the IPv6 stack from learning the scope id of the link-local IPv6 address, causing random failures as the IP stack chose a random link to resolve the address on. This commit 5462eddd7a made us bail out of cma_check_linklocal early if the address passed in was not an IPv6 link-local address. On the address resolution path, the address passed in is the source address; if the source address is the unspecified address, which is not link-local, we will bail out early. This is mostly correct, but if the destination address is a link-local address, then we will be following a link-local route, and we'll need to tell the IPv6 stack what the scope id of the destination address is. This used to be done by last line of cma_check_linklocal, which is skipped when bailing out early: dev_addr->bound_dev_if = sin6->sin6_scope_id; (In cma_bind_addr, the sin6_scope_id of the source address is set to the sin6_scope_id of the destination address, so this is correct) This line is required in turn for the following line, L279 of addr6_resolve, to actually inform the IPv6 stack of the scope id: fl6.flowi6_oif = addr->bound_dev_if; Since we can only know we are in this failure case when we have access to both the source IPv6 address and destination IPv6 address, we have to deal with this further up the stack. So detect this failure case in cma_bind_addr, and set bound_dev_if to the destination address scope id to correct it. Signed-off-by: Spencer Baugh <sbaugh@catern.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28IB/ucma: Fix theoretical user triggered use-after-freeJason Gunthorpe1-3/+3
Something like this: CPU A CPU B Acked-by: Sean Hefty <sean.hefty@intel.com> ======================== ================================ ucma_destroy_id() wait_for_completion() .. anything ucma_put_ctx() complete() .. continues ... ucma_leave_multicast() mutex_lock(mut) atomic_inc(ctx->ref) mutex_unlock(mut) ucma_free_ctx() ucma_cleanup_multicast() mutex_lock(mut) kfree(mc) rdma_leave_multicast(mc->ctx->cm_id,.. Fix it by latching the ref at 0. Once it goes to 0 mc and ctx cannot leave the mutex(mut) protection. The other atomic_inc in ucma_get_ctx is OK because mutex(mut) protects it from racing with ucma_destroy_id. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28iw_cxgb4: set the default MPA version to 2Hariprasad S1-2/+2
This enables ORD/IRD negotiation and its about time to enable it by default Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28RDMA/iser: Limit sgs to the device fastreg depthSteve Wise1-0/+9
Currently the sg tablesize, which dictates fast register page list depth to use, does not take into account the limits of the rdma device. So adjust it once we discover the device fastreg max depth limit. Also adjust the max_sectors based on the resulting sg tablesize. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28IB/mlx5: Remove dead code from alloc_cached_mr()Roland Dreier1-3/+0
The only place that assigns mr inside the loop already does a break. So "if (mr)" will never be true here since the function initializes mr to NULL at the top. We can just drop the extra if and break here. Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28IB/qib: Change lkey table allocation to support more MRsMike Marciniszyn3-4/+16
The lkey table is allocated with with a get_user_pages() with an order based on a number of index bits from a module parameter. The underlying kernel code cannot allocate that many contiguous pages. There is no reason the underlying memory needs to be physically contiguous. This patch: - switches the allocation/deallocation to vmalloc/vfree - caps the number of bits to 23 to insure at least 1 generation bit o this matches the module parameter description Cc: stable@vger.kernel.org Reviewed-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28mlx5: Expose correct page_size_cap in device attributesSagi Grimberg1-1/+2
Should be all the page sizes that are supported by the device. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-28mlx5: Fix missing device local_dma_lkeySagi Grimberg2-1/+30
The mlx5 driver exposes device capability IB_DEVICE_LOCAL_DMA_LKEY but does not set the the device local_dma_lkey. This breaks rpcrdma drivers. Query and set this lkey when creating the device resources. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-23Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-13/+15
Pull SCSI fixes from James Bottomley: "A couple of major (hang and deadlock) fixes with fortunately fairly rare triggering conditions. The PM oops is only really triggered by people using enclosure services (rare) and the fnic driver is mostly used in enterprise environments" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: SCSI: Fix NULL pointer dereference in runtime PM fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack
2015-08-23Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-1/+1
Pull MIPS bug fixes from Ralf Baechle: "Two more fixes for 4.2. One fixes a build issue with the LLVM assembler - LLVM assembler macro names are case sensitive, GNU as macro names are insensitive; the other corrects a license string (GPL v2, not GPLv2) such that the module loader will recognice the license correctly" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: FIRMWARE: bcm47xx_nvram: Fix module license. MIPS: Fix LLVM build issue.
2015-08-22Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-1/+3
Pull irq fixes from Thomas Gleixner: "A series of small fixlets for a regression visible on OMAP devices caused by the conversion of the OMAP interrupt chips to hierarchical interrupt domains. Mostly one liners on the driver side plus a small helper function in the core to avoid open coded mess in the drivers" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/crossbar: Restore set_wake functionality irqchip/crossbar: Restore the mask on suspend behaviour ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism irqchip/crossbar: Restore the irq_set_type() mechanism genirq: Introduce irq_chip_set_type_parent() helper genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy
2015-08-22Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-0/+1
Pull timer fixes from Thomas Gleixner: "Two minimalistic fixes for 4.2 regressions: - Eric fixed a thinko in the timer_list base switching code caused by the overhaul of the timer wheel. It can cause a cpu to see the wrong base for a timer while we move the timer around. - Guenter fixed a regression for IMX if booted w/o device tree, where the timer interrupt is not initialized and therefor the machine fails to boot" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/imx: Fix boot with non-DT systems timer: Write timer->flags atomically
2015-08-21mm: make page pfmemalloc check more robustMichal Hocko4-4/+4
Commit c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb") added checks for page->pfmemalloc to __skb_fill_page_desc(): if (page->pfmemalloc && !page->mapping) skb->pfmemalloc = true; It assumes page->mapping == NULL implies that page->pfmemalloc can be trusted. However, __delete_from_page_cache() can set set page->mapping to NULL and leave page->index value alone. Due to being in union, a non-zero page->index will be interpreted as true page->pfmemalloc. So the assumption is invalid if the networking code can see such a page. And it seems it can. We have encountered this with a NFS over loopback setup when such a page is attached to a new skbuf. There is no copying going on in this case so the page confuses __skb_fill_page_desc which interprets the index as pfmemalloc flag and the network stack drops packets that have been allocated using the reserves unless they are to be queued on sockets handling the swapping which is the case here and that leads to hangs when the nfs client waits for a response from the server which has been dropped and thus never arrive. The struct page is already heavily packed so rather than finding another hole to put it in, let's do a trick instead. We can reuse the index again but define it to an impossible value (-1UL). This is the page index so it should never see the value that large. Replace all direct users of page->pfmemalloc by page_is_pfmemalloc which will hide this nastiness from unspoiled eyes. The information will get lost if somebody wants to use page->index obviously but that was the case before and the original code expected that the information should be persisted somewhere else if that is really needed (e.g. what SLAB and SLUB do). [akpm@linux-foundation.org: fix blooper in slub] Fixes: c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb") Signed-off-by: Michal Hocko <mhocko@suse.com> Debugged-by: Vlastimil Babka <vbabka@suse.com> Debugged-by: Jiri Bohac <jbohac@suse.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Acked-by: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-21Merge tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds2-2/+7
Pull PCI fixes from Bjorn Helgaas: "These are fixes for ASPM-related NULL pointer dereference crashes on Sparc and PowerPC and 64-bit PCI address-related HPMC crashes on PA-RISC. These are both caused by things we merged in the v4.2 merge window. Details: Resource management - Don't use 64-bit bus addresses on PA-RISC Miscellaneous - Tolerate hierarchies with no Root Port" * tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Don't use 64-bit bus addresses on PA-RISC PCI: Tolerate hierarchies with no Root Port
2015-08-21Merge tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds13-602/+32
Pull media fixes from Mauro Carvalho Chehab: - a regression fix at the videobuf2 core driver - fix error handling at mantis probing code - revert the IR encode patches, as the API is not mature enough. So, better to postpone the changes to a latter Kernel - fix Kconfig breakages on some randconfig scenarios. * tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] mantis: Fix error handling in mantis_dma_init() Revert "[media] rc: rc-ir-raw: Add scancode encoder callback" Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper" Revert "[media] rc: ir-rc5-decoder: Add encode capability" Revert "[media] rc: ir-rc6-decoder: Add encode capability" Revert "[media] rc: rc-core: Add support for encode_wakeup drivers" Revert "[media] rc: rc-loopback: Add loopback of filter scancodes" Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback" [media] vb2: Fix compilation breakage when !CONFIG_BUG [media] vb2: Only requeue buffers immediately once streaming is started [media] media/pci/cobalt: fix Kconfig and build when SND is not enabled [media] media/dvb: fix ts2020.c Kconfig and build
2015-08-21Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-1/+1
Pull input layer fix from Dmitry Torokhov: "A small fixup to gpio_keys_polled driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio_keys_polled - request GPIO pin as input.
2015-08-21Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds5-37/+34
Pull drm fixes from Dave Airlie: "A bunch of i915 fixes, one revert a VBT fix that was a bit premature, and some braswell feature removal that the hw actually didn't support. One radeon race fix at boot, and one hlcdc build fix, one fix from Russell that fixes build as well with new audio features. This is hopefully all I have until -next" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix hotplug race at startup drm/edid: add function to help find SADs drm/i915: Avoid TP3 on CHV drm/i915: remove HBR2 from chv supported list Revert "drm/i915: Add eDP intermediate frequencies for CHV" Revert "drm/i915: Allow parsing of variable size child device entries from VBT" drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only drm/i915: Flag the execlists context object as dirty after every use
2015-08-21drm/radeon: fix hotplug race at startupDave Airlie1-0/+5
We apparantly get a hotplug irq before we've initialised modesetting, [drm] Loading R100 Microcode BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c125f56f>] __mutex_lock_slowpath+0x23/0x91 *pde = 00000000 Oops: 0002 [#1] Modules linked in: radeon(+) drm_kms_helper ttm drm i2c_algo_bit backlight pcspkr psmouse evdev sr_mod input_leds led_class cdrom sg parport_pc parport floppy intel_agp intel_gtt lpc_ich acpi_cpufreq processor button mfd_core agpgart uhci_hcd ehci_hcd rng_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm usbcore usb_common i2c_i801 i2c_core snd_timer snd soundcore thermal_sys CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 4.2.0-rc7-00015-gbf67402 #111 Hardware name: MicroLink /D850MV , BIOS MV85010A.86A.0067.P24.0304081124 04/08/2003 Workqueue: events radeon_hotplug_work_func [radeon] task: f6ca5900 ti: f6d3e000 task.ti: f6d3e000 EIP: 0060:[<c125f56f>] EFLAGS: 00010282 CPU: 0 EIP is at __mutex_lock_slowpath+0x23/0x91 EAX: 00000000 EBX: f5e900fc ECX: 00000000 EDX: fffffffe ESI: f6ca5900 EDI: f5e90100 EBP: f5e90000 ESP: f6d3ff0c DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 CR0: 8005003b CR2: 00000000 CR3: 36f61000 CR4: 000006d0 Stack: f5e90100 00000000 c103c4c1 f6d2a5a0 f5e900fc f6df394c c125f162 f8b0faca f6d2a5a0 c138ca00 f6df394c f7395600 c1034741 00d40000 00000000 f6d2a5a0 c138ca00 f6d2a5b8 c138ca10 c1034b58 00000001 f6d40000 f6ca5900 f6d0c940 Call Trace: [<c103c4c1>] ? dequeue_task_fair+0xa4/0xb7 [<c125f162>] ? mutex_lock+0x9/0xa [<f8b0faca>] ? radeon_hotplug_work_func+0x17/0x57 [radeon] [<c1034741>] ? process_one_work+0xfc/0x194 [<c1034b58>] ? worker_thread+0x18d/0x218 [<c10349cb>] ? rescuer_thread+0x1d5/0x1d5 [<c103742a>] ? kthread+0x7b/0x80 [<c12601c0>] ? ret_from_kernel_thread+0x20/0x30 [<c10373af>] ? init_completion+0x18/0x18 Code: 42 08 e8 8e a6 dd ff c3 57 56 53 83 ec 0c 8b 35 48 f7 37 c1 8b 10 4a 74 1a 89 c3 8d 78 04 8b 40 08 89 63 Reported-and-Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-21Merge tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel into drm-fixesDave Airlie3-36/+28
Revert of a VBT parsing commit that should've been queued for drm-next, not v4.2. The revert unbreaks Braswell among other things. Also on Braswell removal of DP HBR2/TP3 and intermediate eDP frequency support. The code was optimistically added based on incorrect documentation; the platform does not support them. These are cc: stable. Finally a gpu state fix from Chris, also cc: stable. * tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel: drm/i915: Avoid TP3 on CHV drm/i915: remove HBR2 from chv supported list Revert "drm/i915: Add eDP intermediate frequencies for CHV" Revert "drm/i915: Allow parsing of variable size child device entries from VBT" drm/i915: Flag the execlists context object as dirty after every use
2015-08-20Merge tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds2-5/+17
Pull power management and ACPI fixes from Rafael Wysocki: "These fix a recent regression in the ACPI backlight code and a memory leak in the Exynos cpufreq driver. Specifics: - Fix a recently introduced issue in the ACPI backlight code which causes lockdep to complain about a circular lock dependency during initialization (Hans de Goede). - Fix a possible memory during initialization in the Exynos cpufreq driver (Shailendra Verma)" * tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: exynos: Fix for memory leak in case SoC name does not match ACPI / video: Fix circular lock dependency issue in the video-detect code
2015-08-21Merge branches 'acpi-video' and 'cpufreq-fixes'Rafael J. Wysocki2-5/+17
* acpi-video: ACPI / video: Fix circular lock dependency issue in the video-detect code * cpufreq-fixes: cpufreq: exynos: Fix for memory leak in case SoC name does not match
2015-08-20PCI: Don't use 64-bit bus addresses on PA-RISCBjorn Helgaas1-1/+1
Meelis and Helge reported that 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") caused HPMCs on A500 and hangs on rp5470. PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so prior to 3a9ad0b4fdcd, we always used 32-bit PCI addresses. After 3a9ad0b4fdcd, we do use 64-bit PCI addresses in 64-bit kernels, and apparently there's some PA-RISC problem related to them. Fixes: 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t") Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Helge Deller <deller@gmx.de> Tested-by: Helge Deller <deller@gmx.de> Based-on-idea-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.19+
2015-08-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-57/+83
Pull networking fixes from David Miller: 1) Out of bounds array access in 802.11 minstrel code, from Adrien Schildknecht. 2) Don't use skb_get() in IGMP/MLD code paths, as this makes pskb_may_pull() BUG. From Linus Luessing. 3) Fix off by one in ipv4 route dumping code, from Andy Whitcroft. 4) Fix deadlock in reqsk_queue_unlink(), from Eric Dumazet. 5) Fix ppp device deregistration wrt. netns deletion, from Guillaume Nault. 6) Fix deadlock when creating per-cpu ipv6 routes, from Martin KaFai Lau. 7) Fix memory leak in batman-adv code, from Sven Eckelmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: batman-adv: Fix memory leak on tt add with invalid vlan net: phy: fix semicolon.cocci warnings net: qmi_wwan: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module be2net: avoid vxlan offloading on multichannel configs ipv6: Fix a potential deadlock when creating pcpu rt ipv6: Add rt6_make_pcpu_route() ipv6: Remove un-used argument from ip6_dst_alloc() net: phy: workaround for buggy cable detection by LAN8700 after cable plugging net: ethernet: micrel: fix an error code ppp: fix device unregistration upon netns deletion net: phy: fix PHY_RUNNING in phy_state_machine Revert "net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MIN" inet: fix potential deadlock in reqsk_queue_unlink() gianfar: Restore link state settings after MAC reset ipv4: off-by-one in continuation handling in /proc/net/route net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code mac80211: fix invalid read in minstrel_sort_best_tp_rates()
2015-08-20Input: gpio_keys_polled - request GPIO pin as input.Vincent Pelletier1-1/+1
GPIOF_IN flag was lost in: Commit 633a21d80b4a("input: gpio_keys_polled: Add support for GPIO descriptors"). Without this flag, legacy code path (for non-descriptor GPIO declarations) would configure GPIO as output (0 meaning GPIOF_DIR_OUT | GPIOF_INIT_LOW). Cc: stable@vger.kernel.org Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds4-23/+44
Pull SCSI target fixes from Nicholas Bellinger: "This contains a v4.2-rc specific RCU module unload regression bug-fix, a long-standing iscsi-target bug-fix for duplicate target_xfer_tags during NOP processing from Alexei, and two more small REPORT_LUNs emulation related patches to make Solaris FC host LUN scanning happy from Roland. There is also one patch not included that allows target-core to limit the number of fabric driver SGLs per I/O request using residuals, that is currently required as a work-around for FC hosts which don't honor EVPD block-limits settings. At this point, it will most likely become for-next material" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix handling of small allocation lengths in REPORT LUNS target: REPORT LUNS should return LUN 0 even for dynamic ACLs target/iscsi: Fix double free of a TUR followed by a solicited NOPOUT target: Perform RCU callback barrier before backend/fabric unload
2015-08-20Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermalLinus Torvalds2-33/+48
Pull thermal fixes from Eduardo Valentin: "Last minute fixes on the thermal-soc tree. There is a fix of a long lasting bug in cpu cooling device, thanks for RMK for being pushing this" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal/cpu_cooling: update policy limits if clipped_freq < policy->max thermal/cpu_cooling: rename max_freq as clipped_freq in notifier thermal/cpu_cooling: rename cpufreq_val as clipped_freq thermal/cpu_cooling: convert 'switch' block to 'if' block in notifier thermal/cpu_cooling: quit early after updating policy thermal/cpu_cooling: No need to initialize max_freq to 0 thermal: cpu_cooling: fix lockdep problems in cpu_cooling thermal: power_allocator: do not use devm* interfaces
2015-08-20clocksource/imx: Fix boot with non-DT systemsGuenter Roeck1-0/+1
Commit 6dd747825b20 ("ARM: imx: move timer resources into a structure") moved initialization parameters into a data structure, but neglected to set the irq field in that data structure for non-DT boots. This causes the system to hang if a non-DT boot is attempted. Fixes: 6dd747825b20 ("ARM: imx: move timer resources into a structure") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1440066441-13930-1-git-send-email-linux@roeck-us.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.