| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
struct timex is not y2038 safe.
Replace all uses of timex with y2038 safe __kernel_timex.
Note that struct __kernel_timex is an ABI interface definition.
We could define a new structure based on __kernel_timex that
is only available internally instead. Right now, there isn't
a strong motivation for this as the structure is isolated to
a few defined struct timex interfaces and such a structure would
be exactly the same as struct timex.
The patch was generated by the following coccinelle script:
virtual patch
@depends on patch forall@
identifier ts;
expression e;
@@
(
- struct timex ts;
+ struct __kernel_timex ts;
|
- struct timex ts = {};
+ struct __kernel_timex ts = {};
|
- struct timex ts = e;
+ struct __kernel_timex ts = e;
|
- struct timex *ts;
+ struct __kernel_timex *ts;
|
(memset \| copy_from_user \| copy_to_user \)(...,
- sizeof(struct timex))
+ sizeof(struct __kernel_timex))
)
@depends on patch forall@
identifier ts;
identifier fn;
@@
fn(...,
- struct timex *ts,
+ struct __kernel_timex *ts,
...) {
...
}
@depends on patch forall@
identifier ts;
identifier fn;
@@
fn(...,
- struct timex *ts) {
+ struct __kernel_timex *ts) {
...
}
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: linux-alpha@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull ARM SoC fixes from Olof Johansson:
"A bigger batch than I anticipated this week, for two reasons:
- Some fallout on Davinci from board file -> DTB conversion, that
also includes a few longer-standing fixes (i.e. not recent
regressions).
- drivers/reset material that has been in linux-next for a while, but
didn't get sent to us until now for a variety of reasons
(maintainer out sick, holidays, etc). There's a functional
dependency in there such that one platform (Altera's SoCFPGA) won't
boot without one of the patches; instead of reverting the patch
that got merged, I looked at this set and decided it was small
enough that I'll pick it up anyway. If you disagree I can revisit
with a smaller set.
That being said, there's also a handful of the usual stuff:
- Fix for a crash on Armada 7K/8K when the kernel touches
PSCI-reserved memory
- Fix for PCIe reset on Macchiatobin (Armada 8K development board,
what this email is sent from in fact :)
- Enable a few new-merged modules for Amlogic in arm64 defconfig
- Error path fixes on Integrator
- Build fix for Renesas and Qualcomm
- Initialization fix for Renesas RZ/G2E
.. plus a few more fixlets"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
qcom-scm: Include <linux/err.h> header
gpio: pl061: handle failed allocations
ARM: dts: kirkwood: Fix polarity of GPIO fan lines
arm64: dts: marvell: mcbin: fix PCIe reset signal
arm64: dts: marvell: armada-ap806: reserve PSCI area
ARM: dts: da850-lcdk: Correct the sound card name
ARM: dts: da850-lcdk: Correct the audio codec regulators
ARM: dts: da850-evm: Correct the sound card name
ARM: dts: da850-evm: Correct the audio codec regulators
ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
ARM: davinci: da850-evm: fix label names in GPIO lookup entries
ARM: davinci: da830-evm: fix label names in GPIO lookup entries
arm64: defconfig: enable modules for amlogic s400 sound card
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
...
|
|
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for some reported issues.
One reverts a patch that was made to the rtl8723bs driver that turned
out to not be needed at all as it was a bug in clang. The others fix
up some reported issues in the rtl8188eu driver and update the
MAINTAINERS file to point to Larry for this driver so he can get the
bug reports easier.
All have been in linux-next with no reported issues"
* tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Revert "staging: rtl8723bs: Mark ACPI table declaration as used"
staging: rtl8188eu: Fix module loading from tasklet for WEP encryption
staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption
MAINTAINERS: Add entry for staging driver r8188eu
|
|
Pull tty/serial fixes from Greg KH:
"Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
issues.
The first is a simple serial driver fix for a regression that showed
up in 5.0-rc1. The second one resolves a number of reported issues
with the recent tty locking fixes that went into 5.0-rc1. Lots of
people have tested the second one and say it resolves their issues.
Both have been in linux-next with no reported issues"
* tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Don't hold ldisc lock in tty_reopen() if ldisc present
serial: lantiq: Do not swap register read/writes
|
|
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and quirk updates for 5.0-rc2.
The majority here are some quirks for some storage devices to get them
to work properly. There's also a fix here to resolve the reported
issues with some audio devices that say they are UAC3 compliant, but
really are not.
And a fix up for the MAINTAINERS file to remove a dead url.
All have been in linux-next with no reported issues"
* tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: storage: Remove outdated URL from MAINTAINERS
USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
usbcore: Select only first configuration for non-UAC3 compliant devices
USB: storage: add quirk for SMI SM3350
USB: storage: don't insert sane sense for SPC3+ when bad sense specified
usb: cdc-acm: send ZLP for Telit 3G Intel based modems
|
|
Late reset controller changes for v5.0
This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.
* tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux:
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding
reset: socfpga: add an early reset driver for SoCFPGA
reset: fix null pointer dereference on dev by dev_name
reset: Add reset_control_get_count()
reset: Improve reset controller kernel docs
ARC: HSDK: improve reset driver
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses
the PHY_MODE_SATA, but that enum had not yet been added. This caused a
build failure for me, with today's linux.git.
Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
in the Marvell Berlin SATA PHY driver.
Fix the build by:
1) Renaming Marvell's defined value to a more scoped name,
in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.
2) Adding the missing enum, which was going to be added anyway as part
of [1].
[1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com
Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph, with little fixes all over the map
- Loop caching fix for offset/bs change (Jaegeuk Kim)
- Block documentation tweaks (Jeff, Jon, Weiping, John)
- null_blk zoned tweak (John)
- ahch mvebu suspend/resume support. Should have gone into the merge
window, but there was some confusion on which tree had it. (Miquel)
* tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits)
ata: ahci: mvebu: request PHY suspend/resume for Armada 3700
ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM
ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
ata: ahci: mvebu: remove stale comment
ata: libahci_platform: comply to PHY framework
loop: drop caches if offset or block_size are changed
block: fix kerneldoc comment for blk_attempt_plug_merge()
nvme: don't initlialize ctrl->cntlid twice
nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
nvme: pad fake subsys NQN vid and ssvid with zeros
nvme-multipath: zero out ANA log buffer
nvme-fabrics: unset write/poll queues for discovery controllers
nvme-tcp: don't ask if controller is fabrics
nvme-tcp: remove dead code
nvme-pci: fix out of bounds access in nvme_cqe_pending
nvme-pci: rerun irq setup on IO queue init errors
nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
nvme-pci: fix the wrong setting of nr_maps
block: doc: add slice_idle_us to bfq documentation
block: clarify documentation for blk_{start|finish}_plug
...
|
|
Pull dma_zalloc_coherent() removal from Christoph Hellwig:
"We've always had a weird situation around dma_zalloc_coherent. To
safely support mapping the allocations to userspace major
architectures like x86 and arm have always zeroed allocations from
dma_alloc_coherent, but a couple other architectures were missing that
zeroing either always or in corner cases.
Then later we grew anothe dma_zalloc_coherent interface to explicitly
request zeroing, but that just added __GFP_ZERO to the allocation
flags, which for some allocators that didn't end up using the page
allocator ended up being a no-op and still not zeroing the
allocations.
So for this merge window I fixed up all remaining architectures to
zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a
no-op wrapper around dma_alloc_coherent, which fixes all of the above
issues.
dma_zalloc_coherent is now pointless and can go away, and Luis helped
me writing a cocchinelle script and patch series to kill it, which I
think we should apply now just after -rc1 to finally settle these
issue"
* tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove dma_zalloc_coherent()
cross-tree: phase out dma_zalloc_coherent() on headers
cross-tree: phase out dma_zalloc_coherent()
|
|
Pull more drm fixes from Daniel Vetter:
"Dave sends out his pull, everybody remembers holidays are over :-)
Since Dave's already in weekend mode and it was quite a few patches I
figured better to apply all the pulls and forward them to you. Hence
here 2nd part of bugfixes for -rc2.
nouveau:
- backlight fix
- falcon register access fix
- fan fix.
i915:
- Disable PSR for Apple panels
- Broxton ERR_PTR error state fix
- Kabylake VECS workaround fix
- Unwind failure on pinning the gen7 ppgtt
- GVT workload request allocation fix
core:
- Fix fb-helper to work correctly with SDL 1.2 bugs
- Fix lockdep warning in the atomic ioctl and setproperty"
* tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/falcon: avoid touching registers if engine is off
drm/nouveau: Don't disable polling in fallback mode
drm/nouveau: register backlight on pascal and newer
drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR
drm/i915: init per-engine WAs for all engines
drm/i915: Unwind failure on pinning the gen7 ppgtt
drm/i915: Skip the ERR_PTR error state
drm/i915: Disable PSR in Apple panels
gpu/drm: Fix lock held when returning to user space.
drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock
drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2
drm/i915/gvt: Fix workload request allocation before request add
|
|
A feature has been added in the libahci driver: the possibility to set
a new flag in hpriv->flags to let the core handle PHY suspend/resume
automatically. Make use of this feature to make suspend to RAM work
with SATA drives on A3700.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A3700 comphy initialization is done in the firmware (TF-A). Looking at
the SATA PHY initialization routine, there is a comment about "vendor
specific" registers. Two registers are mentioned. They are not
initialized there in the firmware because they are AHCI related, while
the firmware at this location does only PHY configuration. The
solution to avoid doing such initialization is relying on U-Boot.
While this work at boot time, U-Boot is definitely not going to run
during a resume after suspending to RAM.
Two possible solutions were considered:
* Fixing the firmware.
* Fixing the kernel driver.
The first solution would take ages to propagate, while the second
solution is easy to implement as the driver as been a little bit
reworked to prepare for such platform configuration. Hence, this patch
adds an Armada 3700 configuration function to set these two registers
both at boot time (in the probe) and after a suspend (in the resume
path).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
At the beginning, only Armada 38x SoCs where supported by the
ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add
support for Armada 3700 variant") introduced Armada 3700 support. As
opposed to Armada 38x SoCs, the 3700 variants do not have to configure
mbus and the regret option. This patch took care of avoiding such
configuration when not needed in the probe function, but failed to do
the same in the resume path. While doing so looks harmless by
experience, let's clean the driver logic and avoid doing this useless
configuration with Armada 3700 SoCs.
Because the logic is very similar between these two places, it has
been decided to factorize this code and put it in a "Armada 38x
configuration function". This function is part of a new
(per-compatible) platform data structure, so that the addition of such
configuration function for Armada 3700 will be eased.
Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For Armada-38x (32-bit) SoCs, PM platform support has been added since:
commit 32f9494c9dfd ("ARM: mvebu: prepare pm-board.c for the
introduction of Armada 38x support")
commit 3cbd6a6ca81c ("ARM: mvebu: Add standby support")
For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM
platform support has always existed.
There are even suspend/resume hooks in this driver since:
commit d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support")
Remove the stale comment at the end of this driver stating that all
the above does not exist yet.
Fixes: d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Current implementation of the libahci does not take into account the
new PHY framework. Correct the situation by adding a call to
phy_set_mode() before phy_power_on().
PHYs should also be handled at suspend/resume time. For this, call
ahci_platform_enable/disable_phys() at suspend/resume_host() time. These
calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of
the libahci driver must set manually in hpriv->flags at probe time. This
is to avoid breaking users that have not been tested with this change.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull i2c fixes from Wolfram Sang:
"I2C has one core and one driver bugfix for you"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Fix Maximum transfer size
i2c: dev: prevent adapter retries and timeout being set as minus value
|
|
Pull arm64 fixes from Will Deacon:
"Another handful of arm64 fixes here. Most of the complication comes
from improving our kpti code to avoid lengthy pauses (30+ seconds)
during boot when we rewrite the page tables. There are also a couple
of IORT fixes that came in via Lorenzo.
Summary:
- Don't error in kexec_file_load if kaslr-seed is missing in
device-tree
- Fix incorrect argument type passed to iort_match_node_callback()
- Fix IORT build failure when CONFIG_IOMMU_API=n
- Fix kpti performance regression with new rodata default option
- Typo fix"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kexec_file: return successfully even if kaslr-seed doesn't exist
ACPI/IORT: Fix rc_dma_get_range()
arm64: kpti: Avoid rewriting early page tables when KASLR is enabled
arm64: asm-prototypes: Fix fat-fingered typo in comment
ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
|
|
Pull ceph updates from Ilya Dryomov:
"A patch to allow setting abort_on_full and a fix for an old "rbd
unmap" edge case, marked for stable"
* tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client:
rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set
ceph: use vmf_error() in ceph_filemap_fault()
libceph: allow setting abort_on_full for rbd
|
|
Pull ACPI fixes from Rafael Wysocki:
"Fix a build failure introduced recently, fix the xpower PMIC ACPI
driver, clean up the handling of duplicate entries in _PRx power
resource lists and fix addresses in NUMA-related messages on 32-bit
with PAE.
Specifics:
- Fix build failures with both CONFIG_NLS and CONFIG_PCI unset that
can occur since ACPI can be built without PCI now (Sinan Kaya).
- Clean up the handling of duplicate entries in power resource lists
returned by _PRx evaluation to avoid triggering WARN_ON() on
attempts to add duplicate symlinks in sysfs (Hans de Goede).
- Fix issues with the TS current-source switching on systems using
the xpower PMIC by avoiding to update unrelated bits in the TS
pin-ctrl register and avoiding to unconditionally enable TS
current-source on systems where it is not used (Hans de Goede).
- Fix addresses in NUMA-related messages on 32-bit with PAE which can
be truncated due to integer type conversions (Chao Fan)"
* tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PMIC: xpower: Fix TS-pin current-source handling
ACPI: NUMA: Use correct type for printing addresses on i386-PAE
ACPI: power: Skip duplicate power resource references in _PRx
ACPI: Fix build failure when CONFIG_NLS is set to 'n'
|
|
Pull power management updates from Rafael Wysocki:
"These fix fallout after starting to use hrtimers in the runtime PM
framework, fix a few cpufreq issues, fix a recently broken reference
to cpuidle documentation, update MAINTAINERS entries for cpufreq and
cpuidle and make the recently added system suspend and resume support
in devfreq actually work.
Specifics:
- Prevent integer overflows from occurring on 32-bit when converting
milliseconds to nanoseconds in the runtime PM framework and update
comments that still refer to jiffies in it (Vincent Guittot,
Ladislav Michl).
- Fix the SCMI cpufreq driver to always use the same frequency units
for arch_set_freq_scale() and make the scale-invariant load
tracking acutally work with this driver (Quentin Perret).
- Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers
broken during the 4.20 defelopment cycle (Viresh Kumar).
- Prevent the cpufreq core from attempting to return the current
frequency of offline CPUs (Sudeep Holla).
- Add devfreq suspend and resume hooks (missed previously) to the PM
core to make the recently added system suspend and resume support
in devfreq actually work (Lukasz Luba).
- Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add
references to new/current documentation to them (Rafael Wysocki).
- Fix a recently broken reference to cpuidle documentation (Otto
Sabart)"
* tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM-runtime: Fix autosuspend_delay on 32bits arch
PM-runtime: Fix 'jiffies' in comments after switch to hrtimers
cpufreq: scmi: Fix frequency invariance in slow path
doc: trace: fix reference to cpuidle documentation file
cpufreq: check if policy is inactive early in __cpufreq_get()
cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
cpuidle / Documentation: Update cpuidle MAINTAINERS entry
cpufreq / Documentation: Update cpufreq MAINTAINERS entry
PM: sleep: call devfreq suspend/resume
|
|
Pull drm fixes from Dave Airlie:
"Not a huge amount for rc2, assume the usual quiet period, and rc3 will
be most of it.
amdgpu:
- Powerplay fixes
- Virtual display pinning fixes
- Golden register updates for Vega
- Pitch and gem size validation fixes
- SR-IOV init error fix
- Pagetables in system RAM disable for some Raven system
- DP-MST resume fixes
tc358767 bridge:
- fix to work with displayport connector"
* tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm: (26 commits)
drm/amdgpu: disable system memory page tables for now
drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang
drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20
drm/bridge: tc358767: use DP connector if no panel set
drm/bridge: tc358767: fix output H/V syncs
drm/bridge: tc358767: reject modes which require too much BW
drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value
drm/bridge: tc358767: fix single lane configuration
drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE
drm/bridge: tc358767: add bus flags
drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume()
drm/amdgpu: Don't fail resume process if resuming atomic state fails
drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()
drm/amdgpu: validate user GEM object size
drm/amdgpu: validate user pitch alignment
drm/amd/powerplay: drop the unnecessary uclk hard min setting
drm/amd/powerplay: avoid possible buffer overflow
drm/amd/powerplay: create pp_od_clk_voltage device file under OD support
drm/amd/powerplay: update OD support flag for SKU with no OD capabilities
drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG
...
|
|
Try to get reference for ldisc during tty_reopen().
If ldisc present, we don't need to do tty_ldisc_reinit() and lock the
write side for line discipline semaphore.
Effectively, it optimizes fast-path for tty_reopen(), but more
importantly it won't interrupt ongoing IO on the tty as no ldisc change
is needed.
Fixes user-visible issue when tty_reopen() interrupted login process for
user with a long password, observed and reported by Lukas.
Fixes: c96cf923a98d ("tty: Don't block on IO when ldisc change is pending")
Fixes: 83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()")
Cc: Jiri Slaby <jslaby@suse.com>
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Tested-by: Lukas F. Hartmann <lukas@mntmn.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When executed for a PCI_ROOT_COMPLEX type, iort_match_node_callback()
expects the opaque pointer argument to be a PCI bus device. At the
moment rc_dma_get_range() passes the PCI endpoint instead of the bus,
and we've been lucky to have pci_domain_nr(ptr) return 0 instead of
crashing. Pass the bus device to iort_scan_node().
Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
This reverts commit e6d093719e22a09e778edde192dfd89a0cd77b5c.
Turns out it is not needed at all, a fix for clang was made and accepted
upstream in that project that makes this change unnecessary. So revert
it.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
i915 fixes for v5.0-rc2:
- Disable PSR for Apple panels
- Broxton ERR_PTR error state fix
- Kabylake VECS workaround fix
- Unwind failure on pinning the gen7 ppgtt
- GVT workload request allocation fix
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87pnt35z8h.fsf@intel.com
|
|
Second pull request, drm-misc-fixes for v5.0-rc2:
- Fix fb-helper to work correctly with SDL 1.2 bugs.
- Fix lockdep warning in the atomic ioctl and setproperty.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2cf24f5c-2b1f-befa-8d08-058661146b61@linux.intel.com
|
|
* acpi-pci:
ACPI: Fix build failure when CONFIG_NLS is set to 'n'
* acpi-power:
ACPI: power: Skip duplicate power resource references in _PRx
* acpi-misc:
ACPI: NUMA: Use correct type for printing addresses on i386-PAE
|
|
* pm-cpuidle:
doc: trace: fix reference to cpuidle documentation file
cpuidle / Documentation: Update cpuidle MAINTAINERS entry
* pm-cpufreq:
cpufreq: scmi: Fix frequency invariance in slow path
cpufreq: check if policy is inactive early in __cpufreq_get()
cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
cpufreq / Documentation: Update cpufreq MAINTAINERS entry
* pm-sleep:
PM: sleep: call devfreq suspend/resume
|
|
3 nouveau fixes:
one backlight, falcon register access, and a fan fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4MHr=Rq3FkZFTYWPc7o5-dTWFysXB=wN2L91SYeFbzkQ@mail.gmail.com
|
|
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
When a fan is controlled via linear fallback without cstate, we
shouldn't stop polling. Otherwise it won't be adjusted again and
keeps running at an initial crazy pace.
Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios")
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447
Reported-by: Thomas Blume <thomas.blume@suse.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Tegra194 supports maximum 64K Bytes transfer per packet.
Tegra186 and prior supports maximum 4K Bytes transfer per packet.
This patch fixes this payload difference between Tegra194 and prior
Tegra chipsets using separate i2c_adapter_quirks.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
If adapter->retries is set to a minus value from user space via ioctl,
it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to
adapter->algo->master_xfer and adapter->algo->smbus_xfer that is
registered by the underlying bus drivers, and return value 0 to all the
callers. The bus driver will never be accessed anymore by all users,
besides, the users may still get successful return value without any
error or information log print out.
If adapter->timeout is set to minus value from user space via ioctl,
it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer
always break after the the first try, due to the time_after always
returns true.
Signed-off-by: Yi Zeng <yizeng@asrmicro.com>
[wsa: minor grammar updates to commit message]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
Pull NVMe fixes from Christoph.
* 'nvme-5.0' of git://git.infradead.org/nvme:
nvme: don't initlialize ctrl->cntlid twice
nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
nvme: pad fake subsys NQN vid and ssvid with zeros
nvme-multipath: zero out ANA log buffer
nvme-fabrics: unset write/poll queues for discovery controllers
nvme-tcp: don't ask if controller is fabrics
nvme-tcp: remove dead code
nvme-pci: fix out of bounds access in nvme_cqe_pending
nvme-pci: rerun irq setup on IO queue init errors
nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
nvme-pci: fix the wrong setting of nr_maps
|
|
Pull PCI fix from Bjorn Helgaas:
"Fix Amlogic Meson host controller driver build failure (Corentin
Labbe)"
* tag 'pci-v5.0-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: amlogic: Fix build failure due to missing gpio header
|
|
- Powerplay fixes
- Virtual display pinning fixes
- Golden register updates for vega
- Pitch and gem size validation fixes
- Fix for error case in sr-iov init
- Disable page tables in system memory on RV due to issues with IOMMU
reported on some platforms
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109204336.3315-1-alexander.deucher@amd.com
|
|
Pull RISC-V updates from Palmer Dabbelt:
"This tag contains a handful of updates that slipped through the cracks
during the merge window due to the holidays. The fixes are mostly
independent, with the exception of one larger audit-related branch.
Core RISC-V updates:
- The BSS has been moved, which shrinks flat images.
- A fix to test-bpf so it compiles on RV64I-based systems.
- A fix to respect the kernel commandline when there is no device
tree.
- A fix to prevent CPUs from trying to put themselves to sleep when
bringing down the system.
- Support for MODULE_SECTIONS on RV32I-based systems.
- [new in v2] The addition of an SBI earlycon driver. This is
definately a new feature, but I'd like to include it now because I
dropped this patch when submitting the merge window PR that removed
our EARLY_PRINTK support.
RISC-V audit updates:
- The addition of NR_syscalls into unistd.h, which is necessary for
CONFIG_FTRACE_SYSCALLS.
- The definition of CREATE_TRACE_POINTS so __tracepoint_sys_{enter,exit}
get defined.
- A fix for trace_sys_exit() so we can enable HAVE_SYSCALL_TRACEPOINTS
As usual, I've tested this by booting a Fedora-based image on a recent
QEMU (this time just whatever I had lying around).
* tag 'riscv-for-linus-4.21-rc2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
tty/serial: Add RISC-V SBI earlycon support
riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig
riscv: fix trace_sys_exit hook
riscv: define CREATE_TRACE_POINTS in ptrace.c
riscv: define NR_syscalls in unistd.h
riscv: audit: add audit hook in do_syscall_trace_enter/exit()
riscv: add audit support
RISC-V: Support MODULE_SECTIONS mechanism on RV32
MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer
MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree
riscv: don't stop itself in smp_send_stop
arch: riscv: support kernel command line forcing when no DTB passed
tools uapi: fix RISC-V 64-bit support
RISC-V: Make BSS section as the last section in vmlinux.lds.S
|
|
Pull VFIO fixes from Alex Williamson:
- Fix trace header include path for in-tree builds (Masahiro Yamada)
- Fix overflow in unmap wrap-around test (Alex Williamson)
* tag 'vfio-v5.0-rc2' of git://github.com/awilliam/linux-vfio:
vfio/type1: Fix unmap overflow off-by-one
vfio/pci: set TRACE_INCLUDE_PATH to fix the build error
|
|
Pull mtd fixes from Boris Brezillon:
"Core MTD Fixes:
- Fix a bug introduced when exposing MTD devs as NVMEM providers and
check for add_mtd_device() return code everywhere
raw NAND fixes:
- Fix a memory corruption in the QCOM driver"
* tag 'mtd/fixes-for-5.0-rc2' of git://git.infradead.org/linux-mtd:
mtd: rawnand: qcom: fix memory corruption that causes panic
mtd: Check add_mtd_device() ret code
mtd: Fix the check on nvmem_register() ret code
|
|
commit 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds")
refactored the workaround code to have functions per-engine, but didn't
call any of them from logical_xcs_ring_init. Since we do have a non-RCS
workaround for KBL (WaKBLVECSSemaphoreWaitPoll) we do need to call
intel_engine_init_workarounds for non-RCS engines.
Note that whitelist is still RCS-only.
v2: move the call to logical_ring_init (Chris)
Fixes: 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110013232.8972-2-daniele.ceraolospurio@intel.com
(cherry picked from commit a60acb223fecc77531540196008ac2de89e2a162)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
If we fail to pin the ggtt vma slot for the ppgtt page tables, we need
to unwind the locals before reporting the error. Or else on subsequent
attempts to bind the page tables into the ggtt, we will already believe
that the vma has been pinned and continue on blithely. If something else
should happen to be at that location, choas ensues.
Fixes: a2bbf7148342 ("drm/i915/gtt: Only keep gen6 page directories pinned while active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: <stable@vger.kernel.org> # v4.19+
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181222030623.21710-1-chris@chris-wilson.co.uk
(cherry picked from commit d4de753526f4d99f541f1b6ed1d963005c09700c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Although commit fb6f0b64e455 ("drm/i915: Prevent machine hang from
Broxton's vtd w/a and error capture") applied cleanly after a 24 month
hiatus, the code had moved on with new methods for peeking and fetching
the captured gpu info. Make sure we catch all uses of the stashed error
state and avoid dereferencing the error pointer.
v2: Move error pointer determination into i915_gpu_capture_state
v3: Restore early check to avoid capturing and then throwing away
subsequent GPU error states.
Fixes: fb6f0b64e455 ("drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207110554.19897-1-chris@chris-wilson.co.uk
(cherry picked from commit e6154e4cb8b0d3692f84ca0d66b4e1ba0389b134)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
i915 yet don't support PSR in Apple panels, so lets keep it disabled
while we work on that.
v2: Renamed DP_DPCD_QUIRK_PSR_NOT_CURRENTLY_SUPPORTED to
DP_DPCD_QUIRK_NO_PSR (Ville)
v3:
Adding documentation to DP_DPCD_QUIRK_NO_PSR(Dhinakaran and Jani)
Fixed typo in comment of the new quirk entry(Jani)
Fixes: 598c6cfe0690 (drm/i915/psr: Enable PSR1 on gen-9+ HW)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-1-jose.souza@intel.com
(cherry picked from commit 7c5c641a930ed06ca317ee39faee7d5824266348)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We need to call drm_modeset_acquire_fini() when drm_atomic_state_alloc()
failed or call drm_modeset_acquire_init() after drm_atomic_state_alloc()
succeeded.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+6ea337c427f5083ebdf2@syzkaller.appspotmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1547115571-21219-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
|
|
Cast autosuspend_delay to u64 to make sure that the full computation
of 'expires' or slack will be done in u64, even on 32bits arch.
Otherwise, any delay greater than 2^31 nsec can overflow if signed
32bits is used when converting delay from msec to nsec.
Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers)
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PM-runtime now uses the hrtimers infrastructure for autosuspend, however
comments still reference 'jiffies'.
Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers)
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is a window between when RBD_DEV_FLAG_REMOVING is set and when
the device is removed from rbd_dev_list. During this window, we set
"already" and return 0.
Returning 0 from write(2) can confuse userspace tools because
0 indicates that nothing was written. In particular, "rbd unmap"
will retry the write multiple times a second:
10:28:05.463299 write(4, "0", 1) = 0
10:28:05.463509 write(4, "0", 1) = 0
10:28:05.463720 write(4, "0", 1) = 0
10:28:05.463942 write(4, "0", 1) = 0
10:28:05.464155 write(4, "0", 1) = 0
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
|
|
Strict requirement of pixclock to be zero breaks support of SDL 1.2
which contains hardcoded table of supported video modes with non-zero
pixclock values[1].
To better understand which pixclock values are considered valid and how
driver should handle these values, I briefly examined few existing fbdev
drivers and documentation in Documentation/fb/. And it looks like there
are no strict rules on that and actual behaviour varies:
* some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c);
* some treat (pixclock == 0) as invalid value which leads to
-EINVAL (clps711x-fb.c);
* some pass converted pixclock value to hardware (uvesafb.c);
* some are trying to find nearest value from predefined table
(vga16fb.c, video_gx.c).
Given this, I believe that it should be safe to just ignore this value if
changing is not supported. It seems that any portable fbdev application
which was not written only for one specific device working under one
specific kernel version should not rely on any particular behaviour of
pixclock anyway.
However, while enabling SDL1 applications to work out of the box when
there is no /etc/fb.modes with valid settings, this change affects the
video mode choosing logic in SDL. Depending on current screen
resolution, contents of /etc/fb.modes and resolution requested by
application, this may lead to user-visible difference (not always):
image will be displayed in a right way, but it will be aligned to the
left instead of center. There is no "right behaviour" here as well, as
emulated fbdev, opposing to old fbdev drivers, simply ignores any
requsts of video mode changes with resolutions smaller than current.
The easiest way to reproduce this problem is to install sdl-sopwith[2],
remove /etc/fb.modes file if it exists, and then try to run sopwith
from console without X. At least in Fedora 29, sopwith may be simply
installed from standard repositories.
[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings
[2] http://sdl-sopwith.sourceforge.net/
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 79e539453b34e ("DRM: i915: add mode setting support")
Fixes: 771fe6b912fca ("drm/radeon: introduce kernel modesetting for radeon hardware")
Fixes: 785b93ef8c309 ("drm/kms: move driver specific fb common code to helper functions (v2)")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-3-mironov.ivan@gmail.com
|
|
SDL 1.2 sets all fields related to the pixel format to zero in some
cases[1]. Prior to commit db05c48197759 ("drm: fb-helper: Reject all
pixel format changing requests"), there was an unintentional workaround
for this that existed for more than a decade. First in device-specific DRM
drivers, then here in drm_fb_helper.c.
Previous code containing this workaround just ignores pixel format fields
from userspace code. Not a good thing either, as this way, driver may
silently use pixel format different from what client actually requested,
and this in turn will lead to displaying garbage on the screen. I think
that returning EINVAL to userspace in this particular case is the right
option, so I decided to left code from problematic commit untouched
instead of just reverting it entirely.
Here is the steps required to reproduce this problem exactly:
1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL
support. SDL should be compiled with fbdev support (which is
on by default).
2) Create /etc/fb.modes with following contents (values seems
not used, and just required to trigger problematic code in
SDL):
mode "test"
geometry 1 1 1 1 1
timings 1 1 1 1 1 1 1
endmode
3) Create ~/.fceux/fceux.cfg with following contents:
SDL.Hotkeys.Quit = 27
SDL.DoubleBuffering = 1
4) Ensure that screen resolution is at least 1280x960 (e.g.
append "video=Virtual-1:1280x960-32" to the kernel cmdline
for qemu/QXL).
5) Try to run fceux on VT with some ROM file[3]:
# ./fceux color_test.nes
[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c,
FB_SetVideoMode()
[2] http://www.fceux.com
[3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes
Reported-by: saahriktu <mail@saahriktu.org>
Suggested-by: saahriktu <mail@saahriktu.org>
Cc: stable@vger.kernel.org
Fixes: db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests")
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
[danvet: Delete misleading comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
|
Deepa Dinamani
Linus Torvalds
Olof Johansson
John Hubbard
Miquel Raynal
Dmitry Safonov
Jean-Philippe Brucker
Greg Kroah-Hartman
Daniel Vetter
Rafael J. Wysocki
Dave Airlie
Ilia Mirkin
Takashi Iwai
Ben Skeggs
Sowjanya Komatineni
Yi Zeng
Jens Axboe
Daniele Ceraolo Spurio
Chris Wilson
José Roberto de Souza
Tetsuo Handa
Vincent Guittot
Ladislav Michl
Ilya Dryomov
Ivan Mironov