aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-03-01dm cache: add cleaner policyHeinz Mauelshagen3-0/+474
A simple cache policy that writes back all data to the origin. This is used to decommission a dm cache by emptying it. Signed-off-by: Heinz Mauelshagen <mauelshagen@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm cache: add mq policyJoe Thornber3-0/+1207
A cache policy that uses a multiqueue ordered by recent hit count to select which blocks should be promoted and demoted. This is meant to be a general purpose policy. It prioritises reads over writes. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: add cache targetJoe Thornber12-0/+4475
Add a target that allows a fast device such as an SSD to be used as a cache for a slower device such as a disk. A plug-in architecture was chosen so that the decisions about which data to migrate and when are delegated to interchangeable tunable policy modules. The first general purpose module we have developed, called "mq" (multiqueue), follows in the next patch. Other modules are under development. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Heinz Mauelshagen <mauelshagen@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm persistent data: add bitsetJoe Thornber3-0/+329
Add a persistent bitset as a wrapper around dm-array. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm persistent data: add transactional arrayJoe Thornber3-0/+975
Add a transactional array. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm thin: remove cells from stackJoe Thornber3-23/+43
This patch takes advantage of the new bio-prison interface where the memory is now passed in rather than using a mempool in bio-prison. This allows the map function to avoid performing potentially-blocking allocations that could lead to deadlocks: We want to avoid the cell allocation that is done in bio_detain. (The potential for mempool deadlocks still remains in other functions that use bio_detain.) Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm bio prison: pass cell memory inJoe Thornber3-101/+176
Change the dm_bio_prison interface so that instead of allocating memory internally, dm_bio_detain is supplied with a pre-allocated cell each time it is called. This enables a subsequent patch to move the allocation of the struct dm_bio_prison_cell outside the thin target's mapping function so it can no longer block there. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm persistent data: add btree_walkJoe Thornber4-0/+69
Add dm_btree_walk to iterate through the contents of a btree. This will be used by the dm cache target. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: add target num_write_bios fnAlasdair G Kergon1-7/+15
Add a num_write_bios function to struct target. If an instance of a target sets this, it will be queried before the target's mapping function is called on a write bio, and the response controls the number of copies of the write bio that the target will receive. This provides a convenient way for a target to send the same data to more than one device. The new cache target uses this in writethrough mode, to send the data both to the cache and the backing device. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm kcopyd: introduce configurable throttlingMikulas Patocka4-4/+132
This patch allows the administrator to reduce the rate at which kcopyd issues I/O. Each module that uses kcopyd acquires a throttle parameter that can be set in /sys/module/*/parameters. We maintain a history of kcopyd usage by each module in the variables io_period and total_period in struct dm_kcopyd_throttle. The actual kcopyd activity is calculated as a percentage of time equal to "(100 * io_period / total_period)". This is compared with the user-defined throttle percentage threshold and if it is exceeded, we sleep. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm ioctl: allow message to return dataMikulas Patocka1-1/+35
This patch introduces enhanced message support that allows the device-mapper core to recognise messages that are common to all devices, and for messages to return data to userspace. Core messages are processed by the function "message_for_md". If the device mapper doesn't support the message, it is passed to the target driver. If the message returns data, the kernel sets the flag DM_MESSAGE_OUT_FLAG. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm ioctl: optimize functions without variable paramsMikulas Patocka1-18/+34
Device-mapper ioctls receive and send data in a buffer supplied by userspace. The buffer has two parts. The first part contains a 'struct dm_ioctl' and has a fixed size. The second part depends on the ioctl and has a variable size. This patch recognises the specific ioctls that do not use the variable part of the buffer and skips allocating memory for it. In particular, when a device is suspended and a resume ioctl is sent, this now avoid memory allocation completely. The variable "struct dm_ioctl tmp" is moved from the function copy_params to its caller ctl_ioctl and renamed to param_kernel. It is used directly when the ioctl function doesn't need any arguments. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm ioctl: introduce ioctl_flagsMikulas Patocka1-23/+41
This patch introduces flags for each ioctl function. So far, one flag is defined, IOCTL_FLAGS_NO_PARAMS. It is set if the function processing the ioctl doesn't take or produce any parameters in the section of the data buffer that has a variable size. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: merge io_pool and tio_poolJun'ichi Nomura1-49/+27
This patch merges io_pool and tio_pool into io_pool and cleans up related functions. Though device-mapper used to have 2 pools of objects for each dm device, the use of bioset frontbad for per-bio data has shrunk the number of pools to 1 for both bio-based and request-based device types. (See c0820cf5 "dm: introduce per_bio_data" and 94818742 "dm: Use bioset's front_pad for dm_rq_clone_bio_info") So dm no longer has to maintain 2 different pointers. No functional changes. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: remove unused _rq_bio_info_cacheJun'ichi Nomura1-21/+10
Remove _rq_bio_info_cache, which is no longer used. No functional changes. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: fix limits initialization when there are no data devicesMike Christie1-5/+7
dm_calculate_queue_limits will first reset the provided limits to defaults using blk_set_stacking_limits; whereby defeating the purpose of retaining the original live table's limits -- as was intended via commit 3ae706561637331aa578e52bb89ecbba5edcb7a9 ("dm: retain table limits when swapping to new table with no devices"). Fix this improper limits initialization (in the no data devices case) by avoiding the call to dm_calculate_queue_limits. [patch header revised by Mike Snitzer] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.6+ Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm snapshot: add missing module aliasesMikulas Patocka1-0/+2
Add module aliases so that autoloading works correctly if the user tries to activate "snapshot-origin" or "snapshot-merge" targets. Reference: https://bugzilla.redhat.com/889973 Reported-by: Chao Yang <chyang@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm persistent data: set some btree fn parms constMike Snitzer2-9/+9
Mark some constant parameters constant in some dm-btree functions. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: refactor bio cloningAlasdair G Kergon1-68/+96
Refactor part of the bio splitting and cloning code to try to make it easier to understand. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: rename bio cloning functionsAlasdair G Kergon1-32/+31
Rename functions involved in splitting and cloning bios. The sequence of functions is now: (1) __split_and_process* - entry point that selects the processing strategy (2) __send* - prepare the details for each bio needed and loop through them (3) __clone_and_map* - creates a clone and maps it Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: rename request variables to biosAlasdair G Kergon14-66/+66
Use 'bio' in the name of variables and functions that deal with bios rather than 'request' to avoid confusion with the normal block layer use of 'request'. No functional changes. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: clean up clone_bioAlasdair G Kergon1-45/+57
Remove the no-longer-used struct bio_set argument from clone_bio and split_bvec. Use tio->ti in __map_bio() instead of passing in ti. Factor out some code for setting up cloned bios. Take target_request_nr as a parameter to alloc_tio(). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm persistent data: remove CONFIG_EXPERIMENTALKees Cook1-1/+1
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: remove CONFIG_EXPERIMENTALAlasdair G Kergon1-12/+12
Remove EXPERIMENTAL from all existing device-mapper targets. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm thin: use block_size_is_power_of_twoMike Snitzer1-12/+13
Use block_size_is_power_of_two() rather than checking sectors_per_block_shift directly. Also introduce local pool variable in get_bio_block() to eliminate redundant tc->pool dereferences. No functional change. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm bufio: use WRITE_FLUSH instead of REQ_FLUSHMikulas Patocka1-1/+1
Use WRITE_FLUSH instead of REQ_FLUSH for submitted requests to make it consistent with the rest of the kernel. There is no functional change. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm table: remove superfluous variable resetWang Sheng-Hui1-1/+0
If allocation fails, the local var *t is not used any more after kfree. Don't need to reset it to NULL. Remove the unnecesary NULL set here. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm thin: support a non power of 2 discard_granularityMike Snitzer1-8/+1
Support a non-power-of-2 discard granularity in dm-thin, now that the block layer supports this(via 8dd2cb7e880d2f77fba53b523c99133ad5054cfd "block: discard granularity might not be power of 2" and 59771079c18c44e39106f0f30054025acafadb41 "blk: avoid divide-by-zero with zero discard granularity"). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: fix truncated status stringsMikulas Patocka12-113/+97
Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01dm: do not replace bioset for request based dmJun'ichi Nomura1-9/+21
This patch fixes a regression introduced in v3.8, which causes oops like this when dm-multipath is used: general protection fault: 0000 [#1] SMP RIP: 0010:[<ffffffff810fe754>] [<ffffffff810fe754>] mempool_free+0x24/0xb0 Call Trace: <IRQ> [<ffffffff81187417>] bio_put+0x97/0xc0 [<ffffffffa02247a5>] end_clone_bio+0x35/0x90 [dm_mod] [<ffffffff81185efd>] bio_endio+0x1d/0x30 [<ffffffff811f03a3>] req_bio_endio.isra.51+0xa3/0xe0 [<ffffffff811f2f68>] blk_update_request+0x118/0x520 [<ffffffff811f3397>] blk_update_bidi_request+0x27/0xa0 [<ffffffff811f343c>] blk_end_bidi_request+0x2c/0x80 [<ffffffff811f34d0>] blk_end_request+0x10/0x20 [<ffffffffa000b32b>] scsi_io_completion+0xfb/0x6c0 [scsi_mod] [<ffffffffa000107d>] scsi_finish_command+0xbd/0x120 [scsi_mod] [<ffffffffa000b12f>] scsi_softirq_done+0x13f/0x160 [scsi_mod] [<ffffffff811f9fd0>] blk_done_softirq+0x80/0xa0 [<ffffffff81044551>] __do_softirq+0xf1/0x250 [<ffffffff8142ee8c>] call_softirq+0x1c/0x30 [<ffffffff8100420d>] do_softirq+0x8d/0xc0 [<ffffffff81044885>] irq_exit+0xd5/0xe0 [<ffffffff8142f3e3>] do_IRQ+0x63/0xe0 [<ffffffff814257af>] common_interrupt+0x6f/0x6f <EOI> [<ffffffffa021737c>] srp_queuecommand+0x8c/0xcb0 [ib_srp] [<ffffffffa0002f18>] scsi_dispatch_cmd+0x148/0x310 [scsi_mod] [<ffffffffa000a38e>] scsi_request_fn+0x31e/0x520 [scsi_mod] [<ffffffff811f1e57>] __blk_run_queue+0x37/0x50 [<ffffffff811f1f69>] blk_delay_work+0x29/0x40 [<ffffffff81059003>] process_one_work+0x1c3/0x5c0 [<ffffffff8105b22e>] worker_thread+0x15e/0x440 [<ffffffff8106164b>] kthread+0xdb/0xe0 [<ffffffff8142db9c>] ret_from_fork+0x7c/0xb0 The regression was introduced by the change c0820cf5 "dm: introduce per_bio_data", where dm started to replace bioset during table replacement. For bio-based dm, it is good because clone bios do not exist during the table replacement. For request-based dm, however, (not-yet-mapped) clone bios may stay in request queue and survive during the table replacement. So freeing the old bioset could cause the oops in bio_put(). Since the size of front_pad may change only with bio-based dm, it is not necessary to replace bioset for request-based dm. Reported-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-02-28Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds1-691/+1161
Pull Ceph updates from Sage Weil: "A few groups of patches here. Alex has been hard at work improving the RBD code, layout groundwork for understanding the new formats and doing layering. Most of the infrastructure is now in place for the final bits that will come with the next window. There are a few changes to the data layout. Jim Schutt's patch fixes some non-ideal CRUSH behavior, and a set of patches from me updates the client to speak a newer version of the protocol and implement an improved hashing strategy across storage nodes (when the server side supports it too). A pair of patches from Sam Lang fix the atomicity of open+create operations. Several patches from Yan, Zheng fix various mds/client issues that turned up during multi-mds torture tests. A final set of patches expose file layouts via virtual xattrs, and allow the policies to be set on directories via xattrs as well (avoiding the awkward ioctl interface and providing a consistent interface for both kernel mount and ceph-fuse users)." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (143 commits) libceph: add support for HASHPSPOOL pool flag libceph: update osd request/reply encoding libceph: calculate placement based on the internal data types ceph: update support for PGID64, PGPOOL3, OSDENC protocol features ceph: update "ceph_features.h" libceph: decode into cpu-native ceph_pg type libceph: rename ceph_pg -> ceph_pg_v1 rbd: pass length, not op for osd completions rbd: move rbd_osd_trivial_callback() libceph: use a do..while loop in con_work() libceph: use a flag to indicate a fault has occurred libceph: separate non-locked fault handling libceph: encapsulate connection backoff libceph: eliminate sparse warnings ceph: eliminate sparse warnings in fs code rbd: eliminate sparse warnings libceph: define connection flag helpers rbd: normalize dout() calls rbd: barriers are hard rbd: ignore zero-length requests ...
2013-02-28Merge branch 'for-3.9/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds21-1418/+3980
Pull block driver bits from Jens Axboe: "After the block IO core bits are in, please grab the driver updates from below as well. It contains: - Fix ancient regression in dac960. Nobody must be using that anymore... - Some good fixes from Guo Ghao for loop, fixing both potential oopses and deadlocks. - Improve mtip32xx for NUMA systems, by being a bit more clever in distributing work. - Add IBM RamSan 70/80 driver. A second round of fixes for that is pending, that will come in through for-linus during the 3.9 cycle as per usual. - A few xen-blk{back,front} fixes from Konrad and Roger. - Other minor fixes and improvements." * 'for-3.9/drivers' of git://git.kernel.dk/linux-block: loopdev: ignore negative offset when calculate loop device size loopdev: remove an user triggerable oops loopdev: move common code into loop_figure_size() loopdev: update block device size in loop_set_status() loopdev: fix a deadlock xen-blkback: use balloon pages for persistent grants xen-blkfront: drop the use of llist_for_each_entry_safe xen/blkback: Don't trust the handle from the frontend. xen-blkback: do not leak mode property block: IBM RamSan 70/80 driver fixes rsxx: add slab.h include to dma.c drivers/block/mtip32xx: add missing GENERIC_HARDIRQS dependency block: remove new __devinit/exit annotations on ramsam driver block: IBM RamSan 70/80 device driver drivers/block/mtip32xx/mtip32xx.c:1726:5: sparse: symbol 'mtip_send_trim' was not declared. Should it be static? drivers/block/mtip32xx/mtip32xx.c:4029:1: sparse: symbol 'mtip_workq_sdbf0' was not declared. Should it be static? dac960: return success instead of -ENOTTY mtip32xx: add trim support mtip32xx: Add workqueue and NUMA support block: delete super ancient PC-XT driver for 1980's hardware
2013-02-28Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-blockLinus Torvalds3-12/+5
Pull block IO core bits from Jens Axboe: "Below are the core block IO bits for 3.9. It was delayed a few days since my workstation kept crashing every 2-8h after pulling it into current -git, but turns out it is a bug in the new pstate code (divide by zero, will report separately). In any case, it contains: - The big cfq/blkcg update from Tejun and and Vivek. - Additional block and writeback tracepoints from Tejun. - Improvement of the should sort (based on queues) logic in the plug flushing. - _io() variants of the wait_for_completion() interface, using io_schedule() instead of schedule() to contribute to io wait properly. - Various little fixes. You'll get two trivial merge conflicts, which should be easy enough to fix up" Fix up the trivial conflicts due to hlist traversal cleanups (commit b67bfe0d42ca: "hlist: drop the node parameter from iterators"). * 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits) block: remove redundant check to bd_openers() block: use i_size_write() in bd_set_size() cfq: fix lock imbalance with failed allocations drivers/block/swim3.c: fix null pointer dereference block: don't select PERCPU_RWSEM block: account iowait time when waiting for completion of IO request sched: add wait_for_completion_io[_timeout] writeback: add more tracepoints block: add block_{touch|dirty}_buffer tracepoint buffer: make touch_buffer() an exported function block: add @req to bio_{front|back}_merge tracepoints block: add missing block_bio_complete() tracepoint block: Remove should_sort judgement when flush blk_plug block,elevator: use new hashtable implementation cfq-iosched: add hierarchical cfq_group statistics cfq-iosched: collect stats from dead cfqgs cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats() blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock block: RCU free request_queue blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge() ...
2013-02-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds49-923/+2165
Pull first round of SCSI updates from James Bottomley: "The patch set is mostly driver updates (bnx2fc, ipr, lpfc, qla4) and a few bug fixes" Pull delayed because google hates James, and sneakily considers his pull requests spam. Why, google, why? * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (60 commits) [SCSI] aacraid: 1024 max outstanding command support for Series 7 and above [SCSI] bnx2fc: adjust duplicate test [SCSI] qla4xxx: Update driver version to 5.03.00-k4 [SCSI] qla4xxx: Fix return code for qla4xxx_session_get_param. [SCSI] qla4xxx: wait for boot target login response during probe. [SCSI] qla4xxx: Added support for force firmware dump [SCSI] qla4xxx: Re-register IRQ handler while retrying initialize of adapter [SCSI] qla4xxx: Throttle active IOCBs to firmware limits [SCSI] qla4xxx: Remove unnecessary code from qla4xxx_init_local_data [SCSI] qla4xxx: Quiesce driver activities while loopback [SCSI] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to MBOX_ASTS_IDC_REQUEST_NOTIFICATION [SCSI] qla4xxx: Add spurious interrupt messages under debug level 2 [SCSI] cxgb4i: Remove the scsi host device when removing device [SCSI] bfa: fix strncpy() limiter in bfad_start_ops() [SCSI] qla4xxx: Update driver version to 5.03.00-k3 [SCSI] qla4xxx: Correct the validation to check in get_sys_info mailbox [SCSI] qla4xxx: Pass correct function param to qla4_8xxx_rd_direct [SCSI] lpfc 8.3.37: Update lpfc version for 8.3.37 driver release [SCSI] lpfc 8.3.37: Fixed infinite loop in lpfc_sli4_fcf_rr_next_index_get. [SCSI] lpfc 8.3.37: Fixed crash due to SLI Port invalid resource count ...
2013-02-27Merge branch 'akpm' (final batch from Andrew)Linus Torvalds115-1163/+1220
Merge third patch-bumb from Andrew Morton: "This wraps me up for -rc1. - Lots of misc stuff and things which were deferred/missed from patchbombings 1 & 2. - ocfs2 things - lib/scatterlist - hfsplus - fatfs - documentation - signals - procfs - lockdep - coredump - seqfile core - kexec - Tejun's large IDR tree reworkings - ipmi - partitions - nbd - random() things - kfifo - tools/testing/selftests updates - Sasha's large and pointless hlist cleanup" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (163 commits) hlist: drop the node parameter from iterators kcmp: make it depend on CHECKPOINT_RESTORE selftests: add a simple doc tools/testing/selftests/Makefile: rearrange targets selftests/efivarfs: add create-read test selftests/efivarfs: add empty file creation test selftests: add tests for efivarfs kfifo: fix kfifo_alloc() and kfifo_init() kfifo: move kfifo.c from kernel/ to lib/ arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS w1: add support for DS2413 Dual Channel Addressable Switch memstick: move the dereference below the NULL test drivers/pps/clients/pps-gpio.c: use devm_kzalloc Documentation/DMA-API-HOWTO.txt: fix typo include/linux/eventfd.h: fix incorrect filename is a comment mtd: mtd_stresstest: use prandom_bytes() mtd: mtd_subpagetest: convert to use prandom library mtd: mtd_speedtest: use prandom_bytes mtd: mtd_pagetest: convert to use prandom library mtd: mtd_oobtest: convert to use prandom library ...
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin32-176/+117
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27w1: add support for DS2413 Dual Channel Addressable SwitchMariusz Bialonczyk4-5/+189
Also fixes some whitespace inconsistency in Kconfig and w1_family.h when DS2408 chip support was added. Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27memstick: move the dereference below the NULL testWei Yongjun1-1/+2
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27drivers/pps/clients/pps-gpio.c: use devm_kzallocJulia Lawall1-4/+2
devm_kzalloc allocates memory that is released when a driver detaches. This patch uses devm_kzalloc for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mtd: mtd_stresstest: use prandom_bytes()Akinobu Mita1-2/+1
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mtd: mtd_subpagetest: convert to use prandom libraryAkinobu Mita1-30/+12
This removes home-brewed pseudo-random number generator and use prandom library. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mtd: mtd_speedtest: use prandom_bytesAkinobu Mita1-8/+1
Use prandom_bytes instead of equivalent local function. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mtd: mtd_pagetest: convert to use prandom libraryAkinobu Mita1-30/+13
This removes home-brewed pseudo-random number generator and use prandom library. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mtd: mtd_oobtest: convert to use prandom libraryAkinobu Mita1-33/+16
This removes home-brewed pseudo-random number generator and use prandom library. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27mtd: mtd_nandecctest: use prandom_bytes instead of get_random_bytes()Akinobu Mita1-1/+1
Using prandom_bytes() is enough. Because this data is only used for testing, not used for cryptographic use. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Laight <david.laight@aculab.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Michel Lespinasse <walken@google.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27nbd: fix sparse warningAlex Elder1-0/+1
I just fixed this in "drivers/block/rbd.c" and I noticed that "drivers/block/nbd.c" has the same problem. Fix a warning issued by sparse by adding some lockdep annotations to indicate the queue lock gets dropped (because it's held when do_nbd_request() is called) and re-acquired within the function. Signed-off-by: Alex Elder <elder@inktank.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Paul Clements <paul.clements@us.sios.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27nbd: show read-only state in sysfsPaolo Bonzini1-0/+3
Pass the read-only flag to set_device_ro, so that it will be visible to the block layer and in sysfs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Alex Bligh <alex@alex.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27nbd: fsync and kill block device on shutdownPaolo Bonzini1-0/+10
There are two problems with shutdown in the NBD driver. 1: Receiving the NBD_DISCONNECT ioctl does not sync the filesystem. This patch adds the sync operation into __nbd_ioctl()'s NBD_DISCONNECT handler. This is useful because BLKFLSBUF is restricted to processes that have CAP_SYS_ADMIN, and the NBD client may not possess it (fsync of the block device does not sync the filesystem, either). 2: Once we clear the socket we have no guarantee that later reads will come from the same backing storage. The patch adds calls to kill_bdev() in __nbd_ioctl()'s socket clearing code so the page cache is cleaned, lest reads that hit on the page cache will return stale data from the previously-accessible disk. Example: # qemu-nbd -r -c/dev/nbd0 /dev/sr0 # file -s /dev/nbd0 /dev/stdin: # UDF filesystem data (version 1.5) etc. # qemu-nbd -d /dev/nbd0 # qemu-nbd -r -c/dev/nbd0 /dev/sda # file -s /dev/nbd0 /dev/stdin: # UDF filesystem data (version 1.5) etc. While /dev/sda has: # file -s /dev/sda /dev/sda: x86 boot sector; etc. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Paul Clements <Paul.Clements@steeleye.com> Cc: Alex Bligh <alex@alex.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27nbd: support FLUSH requestsAlex Bligh1-2/+20
Currently, the NBD device does not accept flush requests from the Linux block layer. If the NBD server opened the target with neither O_SYNC nor O_DSYNC, however, the device will be effectively backed by a writeback cache. Without issuing flushes properly, operation of the NBD device will not be safe against power losses. The NBD protocol has support for both a cache flush command and a FUA command flag; the server will also pass a flag to note its support for these features. This patch adds support for the cache flush command and flag. In the kernel, we receive the flags via the NBD_SET_FLAGS ioctl, and map NBD_FLAG_SEND_FLUSH to the argument of blk_queue_flush. When the flag is active the block layer will send REQ_FLUSH requests, which we translate to NBD_CMD_FLUSH commands. FUA support is not included in this patch because all free software servers implement it with a full fdatasync; thus it has no advantage over supporting flush only. Because I [Paolo] cannot really benchmark it in a realistic scenario, I cannot tell if it is a good idea or not. It is also not clear if it is valid for an NBD server to support FUA but not flush. The Linux block layer gives a warning for this combination, the NBD protocol documentation says nothing about it. The patch also fixes a small problem in the handling of flags: nbd->flags must be cleared at the end of NBD_DO_IT, but the driver was not doing that. The bug manifests itself as follows. Suppose you two different client/server pairs to start the NBD device. Suppose also that the first client supports NBD_SET_FLAGS, and the first server sends NBD_FLAG_SEND_FLUSH; the second pair instead does neither of these two things. Before this patch, the second invocation of NBD_DO_IT will use a stale value of nbd->flags, and the second server will issue an error every time it receives an NBD_CMD_FLUSH command. This bug is pre-existing, but it becomes much more important after this patch; flush failures make the device pretty much unusable, unlike Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bligh <alex@alex.org.uk> Acked-by: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27drivers/char/misc.c:misc_register(): do not loop on misc_list unconditionallyDae S. Kim1-7/+9
If the minor number is assigned dynamically, there is no need to search for misc->minor in misc_list, since misc->minor == MISC_DYNAMIC_MINOR. [akpm@linux-foundation.org: reduce scope of local `c'] Signed-off-by: Dae S. Kim <dae@velatum.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.