aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-10-29driver: tun: Move tun check into the block of TUNSETIFF condition checkGao Feng1-1/+5
When cmd is TUNSETIFF and tun is not null, the original codes go ahead, then reach the default case of switch(cmd) and set the ret is -EINVAL. It is not clear for readers. Now move the tun check into the block of TUNSETIFF condition check, and return -EEXIST instead of -EINVAL when the tfile already owns one tun. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29virtio-net: Update the mtu code to match virtio specAaron Conole1-2/+4
The virtio committee recently ratified a change, VIRTIO-152, which defines the mtu field to be 'max' MTU, not simply desired MTU. This commit brings the virtio-net device in compliance with VIRTIO-152. Additionally, drop the max_mtu branch - it cannot be taken since the u16 returned by virtio_cread16 will never exceed the initial value of max_mtu. Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: "Michael S. Tsirkin" <mst@redhat.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28mlxsw: switchx2: Set physical device for port netdeviceJiri Pirko1-0/+1
Do this so the sysfs has "device" link correctly set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28mlxsw: spectrum: Set physical device for port netdeviceJiri Pirko1-0/+1
Do this so the sysfs has "device" link correctly set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28mlxsw: Move PCI id table definitions into driver modulesJiri Pirko8-71/+135
So far, mlxsw_pci.ko is the module that registers PCI table for all drivers (spectrum and switchx2). That is problematic for example with dracut. Since mlxsw_spectrum.ko and mlxsw_switchx2.ko are loaded dynamically from within mlxsw_core.ko, dracut does not have track of them and avoids them from being included in initramfs. So make this in an ordinary way and define the PCI tables in individual driver modules, so it can be properly loaded and included in dracut initramfs image. As a side effect, this patch could remove no longer necessary driver "kind" strings which were used to link PCI ids with individual mlxsw drivers. Suggested-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28mlxsw: pci: Rename header with HW definitionsJiri Pirko2-6/+6
pci.h needs to be used for inner function declarations. So move the original one to more appropriate name, pci_hw.h. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-28mlxsw: spectrum: Remove extra whitespaceIdo Schimmel1-1/+1
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27ethernet: fix min/max MTU typosStefan Richter2-2/+2
Fixes: d894be57ca92('ethernet: use net core MTU range checking in more drivers') CC: Jarod Wilson <jarod@redhat.com> CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: mark families as __ro_after_initJohannes Berg8-13/+13
Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: statically initialize familiesJohannes Berg8-35/+59
Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: no longer support using static family IDsJohannes Berg8-13/+0
Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26firewire: net: set initial MTU = 1500 unconditionally, fix IPv6 on some CardBus cardsStefan Richter1-7/+1
firewire-net, like the older eth1394 driver, reduced the initial MTU to less than 1500 octets if the local link layer controller's asynchronous packet reception limit was lower. This is bogus, since this reception limit does not have anything to do with the transmission limit. Neither did this reduction affect the TX path positively, nor could it prevent link fragmentation at the RX path. Many FireWire CardBus cards have a max_rec of 9, causing an initial MTU of 1024 - 16 = 1008. RFC 2734 and RFC 3146 allow a minimum max_rec = 8, which would result in an initial MTU of 512 - 16 = 496. On such cards, IPv6 could only be employed if the MTU was manually increased to 1280 or more, i.e. IPv6 would not work without intervention from userland. We now always initialize the MTU to 1500, which is the default according to RFC 2734 and RFC 3146. On a VIA VT6316 based CardBus card which was affected by this, changing the MTU from 1008 to 1500 also increases TX bandwidth by 6 %. RX remains unaffected. CC: netdev@vger.kernel.org CC: linux1394-devel@lists.sourceforge.net CC: Jarod Wilson <jarod@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26firewire: net: fix maximum possible MTUStefan Richter1-3/+4
Commit b3e3893e1253 ("net: use core MTU range checking in misc drivers") mistakenly introduced an upper limit for firewire-net's MTU based on the local link layer controller's reception capability. Revert this. Neither RFC 2734 nor our implementation impose any particular upper limit. Actually, to be on the safe side and to make the code explicit, set ETH_MAX_MTU = 65535 as upper limit now. (I replaced sizeof(struct rfc2734_header) by the equivalent RFC2374_FRAG_HDR_SIZE in order to avoid distracting long/int conversions.) Fixes: b3e3893e1253('net: use core MTU range checking in misc drivers') CC: netdev@vger.kernel.org CC: linux1394-devel@lists.sourceforge.net CC: Jarod Wilson <jarod@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26net: netcp: add missing of_node_put() in netcp_probe()Wei Yongjun1-0/+4
This node pointer is returned by of_get_child_by_name() with refcount incremented in this function. of_node_put() on it before exitting this function. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26net: ena: use setup_timer() and mod_timer()Wei Yongjun1-6/+3
Use setup_timer() instead of init_timer(), being the preferred/standard way to set a timer up. Also, quoting the mod_timer() function comment: -> mod_timer() is a more efficient way to update the expire field of an active timer (if the timer is inactive it will be activated). Use setup_timer and mod_timer to setup and arm a timer, to make the code cleaner and easier to read. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26amd-xgbe: Fix error return code in xgbe_probe()Wei Yongjun1-0/+1
Fix to return error code -ENODEV from the DMA is not supported error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26net: ns83820: use dev_kfree_skb_irq instead of kfree_skbWei Yongjun1-1/+1
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled, spin_lock_irqsave() make sure always in irq disable context. So the kfree_skb() should be replaced with dev_kfree_skb_irq(). This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26net: eth: altera: Fix error return code in altera_tse_probe()Wei Yongjun1-0/+2
Fix to return error code -EINVAL from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26net: dsa: mv88e6xxx: use setup_timer to simplify the codeWei Yongjun1-3/+2
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26net: netcp: drop kfree for memory allocated with devm_kzallocWei Yongjun1-2/+0
It's not necessary to free memory allocated with devm_kzalloc in the remove path and using kfree leads to a double free. Fixes: 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26net: phy: broadcom: Add support for BCM54612EXo Wang1-0/+48
This PHY has internal delays enabled after reset. This clears the internal delay enables unless the interface specifically requests them. Signed-off-by: Xo Wang <xow@google.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23mlxsw: Convert resources into arrayJiri Pirko8-190/+223
Since the number of resources is going to get much bigger, ease up the addition by simly defining IDs. Convert the existing structure members to a set array, one for validity, one for values. Introduce a set of getters and setters for easy access. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23mlxsw: cmd: Push resource query defines to cmd.hJiri Pirko2-6/+9
Push cmd resource query related defines to cmd.h where they belong. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23mlxsw: reg: Generare register names automaticallyJiri Pirko1-123/+73
Extend the MLXSW_REG_DEFINE macro to store register name in string form. Use this string later on instead of hard coded string values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23mlxsw: reg: Use helper macro to define registersJiri Pirko1-240/+66
Save some code and also prepare to easily carry name in string form. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23mlxsw: item: Make char *buf arg constant for gettersJiri Pirko4-19/+23
Enforce const for getter buf args. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-23mlxsw: item: Make struct mlxsw_item args constJiri Pirko1-12/+15
These should be const, so enforce it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-21hv_netvsc: fix a race between netvsc_send() and netvsc_init_buf()Vitaly Kuznetsov1-0/+7
Fix in commit 880988348270 ("hv_netvsc: set nvdev link after populating chn_table") turns out to be incomplete. A crash in netvsc_get_next_send_section() is observed on mtu change when the device is under load. The race I identified is: if we get to netvsc_send() after we set net_device_ctx->nvdev link in netvsc_device_add() but before we finish netvsc_connect_vsp()->netvsc_init_buf() send_section_map is not allocated and we crash. Unfortunately we can't set net_device_ctx->nvdev link after the netvsc_init_buf() call as during the negotiation we need to receive packets and on the receive path we check for it. It would probably be possible to split nvdev into a pair of nvdev_in and nvdev_out links and check them accordingly in get_outbound_net_device()/ get_inbound_net_device() but this looks like an overkill. Check that send_section_map is allocated in netvsc_send(). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20s390/net: use net core MTU range checkingJarod Wilson5-29/+8
ctcm: - min_mtu = 576, max_mtu = 65527 netiucv: - min_mtu = 576, max_mtu = 65535 qeth: - min_mtu = 64, max_mtu = 65535 CC: netdev@vger.kernel.org CC: linux-s390@vger.kernel.org CC: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in misc driversJarod Wilson15-101/+38
firewire-net: - set min/max_mtu - remove fwnet_change_mtu nes: - set max_mtu - clean up nes_netdev_change_mtu xpnet: - set min/max_mtu - remove xpnet_dev_change_mtu hippi: - set min/max_mtu - remove hippi_change_mtu batman-adv: - set max_mtu - remove batadv_interface_change_mtu - initialization is a little async, not 100% certain that max_mtu is set in the optimal place, don't have hardware to test with rionet: - set min/max_mtu - remove rionet_change_mtu slip: - set min/max_mtu - streamline sl_change_mtu um/net_kern: - remove pointless ndo_change_mtu hsi/clients/ssi_protocol: - use core MTU range checking - remove now redundant ssip_pn_set_mtu ipoib: - set a default max MTU value - Note: ipoib's actual max MTU can vary, depending on if the device is in connected mode or not, so we'll just set the max_mtu value to the max possible, and let the ndo_change_mtu function continue to validate any new MTU change requests with checks for CM or not. Note that ipoib has no min_mtu set, and thus, the network core's mtu > 0 check is the only lower bounds here. mptlan: - use net core MTU range checking - remove now redundant mpt_lan_change_mtu fddi: - min_mtu = 21, max_mtu = 4470 - remove now redundant fddi_change_mtu (including export) fjes: - min_mtu = 8192, max_mtu = 65536 - The max_mtu value is actually one over IP_MAX_MTU here, but the idea is to get past the core net MTU range checks so fjes_change_mtu can validate a new MTU against what it supports (see fjes_support_mtu in fjes_hw.c) hsr: - min_mtu = 0 (calls ether_setup, max_mtu is 1500) f_phonet: - min_mtu = 6, max_mtu = 65541 u_ether: - min_mtu = 14, max_mtu = 15412 phonet/pep-gprs: - min_mtu = 576, max_mtu = 65530 - remove redundant gprs_set_mtu CC: netdev@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: Stefan Richter <stefanr@s5r6.in-berlin.de> CC: Faisal Latif <faisal.latif@intel.com> CC: linux-rdma@vger.kernel.org CC: Cliff Whickman <cpw@sgi.com> CC: Robin Holt <robinmholt@gmail.com> CC: Jes Sorensen <jes@trained-monkey.org> CC: Marek Lindner <mareklindner@neomailbox.ch> CC: Simon Wunderlich <sw@simonwunderlich.de> CC: Antonio Quartulli <a@unstable.cc> CC: Sathya Prakash <sathya.prakash@broadcom.com> CC: Chaitra P B <chaitra.basappa@broadcom.com> CC: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> CC: MPT-FusionLinux.pdl@broadcom.com CC: Sebastian Reichel <sre@kernel.org> CC: Felipe Balbi <balbi@kernel.org> CC: Arvid Brodin <arvid.brodin@alten.se> CC: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in virt driversJarod Wilson8-34/+35
hyperv_net: - set min/max_mtu, per Haiyang, after rndis_filter_device_add virtio_net: - set min/max_mtu - remove virtnet_change_mtu vmxnet3: - set min/max_mtu xen-netback: - min_mtu = 0, max_mtu = 65517 xen-netfront: - min_mtu = 0, max_mtu = 65535 unisys/visor: - clean up defines a little to not clash with network core or add redundat definitions CC: netdev@vger.kernel.org CC: virtualization@lists.linux-foundation.org CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: "Michael S. Tsirkin" <mst@redhat.com> CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: Wei Liu <wei.liu2@citrix.com> CC: Paul Durrant <paul.durrant@citrix.com> CC: David Kershner <david.kershner@unisys.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in core net infraJarod Wilson7-88/+74
geneve: - Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu - This one isn't quite as straight-forward as others, could use some closer inspection and testing macvlan: - set min/max_mtu tun: - set min/max_mtu, remove tun_net_change_mtu vxlan: - Merge __vxlan_change_mtu back into vxlan_change_mtu - Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function - This one is also not as straight-forward and could use closer inspection and testing from vxlan folks bridge: - set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function openvswitch: - set min/max_mtu, remove internal_dev_change_mtu - note: max_mtu wasn't checked previously, it's been set to 65535, which is the largest possible size supported sch_teql: - set min/max_mtu (note: max_mtu previously unchecked, used max of 65535) macsec: - min_mtu = 0, max_mtu = 65535 macvlan: - min_mtu = 0, max_mtu = 65535 ntb_netdev: - min_mtu = 0, max_mtu = 65535 veth: - min_mtu = 68, max_mtu = 65535 8021q: - min_mtu = 0, max_mtu = 65535 CC: netdev@vger.kernel.org CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Tom Herbert <tom@herbertland.com> CC: Daniel Borkmann <daniel@iogearbox.net> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Paolo Abeni <pabeni@redhat.com> CC: Jiri Benc <jbenc@redhat.com> CC: WANG Cong <xiyou.wangcong@gmail.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Pravin B Shelar <pshelar@ovn.org> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Patrick McHardy <kaber@trash.net> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Pravin Shelar <pshelar@nicira.com> CC: Maxim Krasnyansky <maxk@qti.qualcomm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in WAN driversJarod Wilson20-30/+6
- set min/max_mtu in all hdlc drivers, remove hdlc_change_mtu - sent max_mtu in lec driver, remove lec_change_mtu - set min/max_mtu in x25_asy driver CC: netdev@vger.kernel.org CC: Krzysztof Halasa <khc@pm.waw.pl> CC: Krzysztof Halasa <khalasa@piap.pl> CC: Jan "Yenya" Kasprzak <kas@fi.muni.cz> CC: Francois Romieu <romieu@fr.zoreil.com> CC: Kevin Curtis <kevin.curtis@farsite.co.uk> CC: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in wireless driversJarod Wilson12-108/+30
- set max_mtu in wil6210 driver - set max_mtu in atmel driver - set min/max_mtu in cisco airo driver, remove airo_change_mtu - set min/max_mtu in ipw2100/ipw2200 drivers, remove libipw_change_mtu - set min/max_mtu in p80211netdev, remove wlan_change_mtu - set min/max_mtu in net/mac80211/iface.c and remove ieee80211_change_mtu - set min/max_mtu in wimax/i2400m and remove i2400m_change_mtu - set min/max_mtu in intersil/hostap and remove prism2_change_mtu - set min/max_mtu in intersil/orinoco - set min/max_mtu in tty/n_gsm and remove gsm_change_mtu CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: Maya Erez <qca_merez@qca.qualcomm.com> CC: Simon Kelley <simon@thekelleys.org.uk> CC: Stanislav Yakovlev <stas.yakovlev@gmail.com> CC: Johannes Berg <johannes@sipsolutions.net> CC: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in USB NIC driversJarod Wilson9-44/+25
usbnet: - Remove stale new_mtu <= 0 check in usbnet.c - Set min_mtu = 0, max_mtu = 65535 (sub-drivers must set their own max_mtu and/or min_mtu as needed) r8152: - Set appropriate max_mtu for different variants (1500 or 9194) lan78xx: - Set max_mtu = 9000 asix_driver: - max_mtu = 16384 for ax88178 variant ax88179: - max_mtu = 4088 cdc_ncm: - max_mtu from hardware cdc-phonet: - min_mtu = 6, max_mtu = 65541 sierra_net: - max_mtu = 1500, call usbnet_change_mtu directly - sierra_net_change_mtu checked for MTU > 1500, then called usbnet_change_mtu, but if we set max_mtu to let the network core handle the range check, then we can simply call usbnet_change_mtu directly smsc75xx: - max_mtu = 9000 CC: netdev@vger.kernel.org CC: Woojung Huh <woojung.huh@microchip.com> CC: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> CC: Hayes Wang <hayeswang@realtek.com> CC: Oliver Neukum <oneukum@suse.com> CC: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ethernet: use net core MTU range checking in more driversJarod Wilson21-108/+67
Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen <jes@trained-monkey.org> CC: Netanel Belgazal <netanel@annapurnalabs.com> CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> CC: John Allen <jallen@linux.vnet.ibm.com> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> CC: Manish Chopra <manish.chopra@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Rajesh Borundia <rajesh.borundia@qlogic.com> CC: Timur Tabi <timur@codeaurora.org> CC: Anirudha Sarangi <anirudh@xilinx.com> CC: John Linn <John.Linn@xilinx.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20myri10ge: fix typo in parameter descriptionWei Yongjun1-1/+1
Fix typo in parameter description. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: ethernet: mediatek: use dev_kfree_skb_any instead of dev_kfree_skbWei Yongjun1-1/+1
Replace dev_kfree_skb with dev_kfree_skb_any in mtk_start_xmit() which can be called from hard irq context (netpoll) and from other contexts. mtk_start_xmit() only frees skbs that it has dropped. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20dwc_eth_qos: use dev_kfree_skb_any instead of dev_kfree_skbWei Yongjun1-1/+1
Replace dev_kfree_skb with dev_kfree_skb_any in dwceqos_start_xmit() which can be called from hard irq context (netpoll) and from other contexts. dwceqos_start_xmit() only frees skbs that it has dropped. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: phy: aquantia: add PHY ID of AQR106 and AQR107Shaohui Xie1-0/+28
The AQR106 and AQR107 can use the existing driver. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: fec: drop check for clk==NULL before calling clk_*Uwe Kleine-König1-14/+11
clk_prepare, clk_enable and their counterparts (at least the common clk ones, but also most others) do check for the clk being NULL anyhow (and return 0 then), so there is no gain when the caller checks, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: smc91x: fix neponset breakage by pxa u16 writesRobert Jarzmik1-0/+2
The patch isolating the u16 writes for pxa assumed all machine_is_*() calls were removed, and therefore removed the mach-types.h include which provided them. Unfortunately 2 machine_is_*() remained in smc91x.c file including smc91x.h from which the include was removed, triggering the error: drivers/net/ethernet/smsc/smc91x.c: In function ‘smc_drv_probe’: drivers/net/ethernet/smsc/smc91x.c:2380:2: error: implicit declaration of function ‘machine_is_assabet’ [-Werror=implicit-function-declaration] if (machine_is_assabet() && machine_has_neponset()) This adds back the wrongly removed include. Fixes: d09d747ae4c2 ("net: smc91x: isolate u16 writes alignment workaround") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19net: macb: Add ethtool get_ringparam and set_ringparam functionalityZach Brown1-0/+59
Some applications want to tune the size of the macb rx/tx ring buffers. The ethtool set_ringparam function is the standard way of doing it. Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19net: macb: Use variables with defaults for tx/rx ring sizes instead of hardcoded valuesZach Brown2-52/+65
The macb driver hardcoded the tx/rx ring sizes. This made it impossible to change the sizes at run time. Add tx_ring_size, and rx_ring_size variables to macb object, which are initilized with default vales during macb_init. Change all references to RX_RING_SIZE and TX_RING_SIZE to their respective replacements. Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19net: arc_emac: use dev_kfree_skb_any instead of dev_kfree_skbWei Yongjun1-1/+1
Replace dev_kfree_skb with dev_kfree_skb_any in arc_emac_tx() which can be called from hard irq context (netpoll) and from other contexts. arc_emac_tx() only frees skbs that it has dropped. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19net: fs_enet: Use net_device_stats from struct net_deviceTobias Klauser2-26/+18
Instead of using a private copy of struct net_device_stats in struct fs_enet_private, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18qed: Remove useless set memory to zero use memset()Wei Yongjun1-1/+0
The memory return by kzalloc() has already be set to zero, so remove useless memset(0). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: dsa: mv88e6xxx: fix non static symbol warningWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/net/dsa/mv88e6xxx/chip.c:2866:5: warning: symbol 'mv88e6xxx_g1_set_switch_mac' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18r8152: add new products of Lenovohayeswang2-1/+33
Add the following four products of Lenovo and sort the order of the list. VID PID 0x17ef 0x3062 0x17ef 0x3069 0x17ef 0x720c 0x17ef 0x7214 Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18net: smc91x: take into account half-word workaroundRobert Jarzmik1-0/+2
For device-tree builds, platforms such as mainstone, idp and stargate2 must have their u16 writes all aligned on 32 bit boundaries. This is already enabled in platform data builds, and this patch adds it to device-tree builds. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.