aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-28Input: st1232 - do not set parent device explicitlyDmitry Torokhov1-1/+0
devm_input_allocate_device() already sets parent device for us. Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - do not allocate fingers data separatelyDmitry Torokhov1-10/+6
The finger structure size is quite small and allocating it together with the main driver structure will not increase likelyhood of allocation failing, but reduces number of objects needing to be tracked by the allocator and devm. Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - do not reset the chip too earlyDmitry Torokhov1-10/+12
We should not be putting the chip into reset while interrupts are enabled and ISR may be running. Fix this by installing a custom devm action and powering off the device/resetting GPIO line from there. This ensures proper ordering. Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - rely on I2C core to configure wakeup interruptDmitry Torokhov1-10/+6
When I2C client is created with I2C_CLIENT_WAKE flag (which happens either because we have "wakeup-source" device property or the flag was passed in when creating an I2C client manually), I2C core will take care of configuring interrupt as wakeup source on suspend. Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - do not unconditionally configure as wakeup sourceDmitry Torokhov1-1/+0
Do not unconditionally configure the touchscreen as wakeup source but rather rely on I2C core to do that when requested (either via "wakeup-source" device property, or when creating a client with I2C_CLIENT_WAKE flag). Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-28Input: st1232 - simplify parsing of read bufferDmitry Torokhov1-25/+25
Avoid complex 2-variable loop when parsing touchscreen data to make the code clearer. Acked-by: Martin Kepplinger <martink@posteo.de> Tested-by: Matthias Fend <Matthias.Fend@wolfvision.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Input: wacom_i2c - remove unneeded gpio.h header fileFabio Estevam1-1/+0
There is no gpio functions used in the driver that is exported by the gpio.h header, so remove this unneeded header. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20191026185958.24158-3-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Input: s3c2410_ts - remove unneeded gpio.h header fileFabio Estevam1-1/+0
There is no gpio functions used in the driver that is exported by the gpio.h header, so remove this unneeded header. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20191026185958.24158-2-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Input: colibri-vf50-ts - remove unneeded gpio.h header fileFabio Estevam1-1/+0
The touchscreen device is a GPIO consumer, not a GPIO controller, so there is no need to include <linux/gpio.h>. Remove the unneeded header file. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20191026185958.24158-1-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Input: gpio_keys_polled - switch to using devm_fwnode_gpiod_get()Dmitry Torokhov1-4/+3
devm_fwnode_get_gpiod_from_child() is going away as the name is too unwieldy, let's switch to using the new devm_fwnode_gpiod_get(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Input: gpio_keys - switch to using devm_fwnode_gpiod_get()Dmitry Torokhov1-4/+2
devm_fwnode_get_gpiod_from_child() is going away as the name is too unwieldy, let's switch to using the new devm_fwnode_gpiod_get(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-27Merge branch 'ib-fwnode-gpiod-get-index' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into nextDmitry Torokhov2-24/+57
Pull in fwnode-gpiod-get-index API.
2019-10-27Merge tag 'v5.4-rc5' into nextDmitry Torokhov6164-177975/+498832
Sync up with mainline.
2019-10-27Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-5/+20
Pull irq fixes from Thomas Gleixner: "Two fixes for interrupt controller drivers: - Skip IRQ_M_EXT entries in the device tree when initializing the RISCV PLIC controller to avoid a double init attempt. - Use the correct ITS list when issuing the VMOVP synchronization command so the operation works only on the ITS instances which are associated to a VM" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/sifive-plic: Skip contexts except supervisor in plic_init() irqchip/gic-v3-its: Use the exact ITSList for VMOVP
2019-10-26Merge tag 'tty-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-4/+4
Pull tty/serial driver fix from Greg KH: "Here is a single tty/serial driver fix for 5.4-rc5 that resolves a reported issue. It has been in linux-next for a while with no problems" * tag 'tty-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: 8250-men-mcb: fix error checking when get_num_ports returns -ENODEV
2019-10-26Merge tag 'staging-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds1-4/+2
Pull staging driver fix from Greg KH: "Here is a single staging driver fix, for the wlan-ng driver, that resolves a reported issue. It is been in linux-next for a while with no reported issues" * tag 'staging-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS
2019-10-26Merge tag 'char-misc-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds2-9/+4
Pull binder fix from Greg KH: "This is a single binder fix to resolve a reported issue by Jann. It's been in linux-next for a while with no reported issues" * tag 'char-misc-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: binder: Don't modify VMA bounds in ->mmap handler
2019-10-26Merge tag 'usb-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds7-44/+47
Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.4-rc5. More "fun" with some of the misc USB drivers as found by syzbot, and there are a number of other small bugfixes in here for reported issues. All have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdns3: Error out if USB_DR_MODE_UNKNOWN in cdns3_core_init_role() USB: ldusb: fix read info leaks USB: serial: ti_usb_3410_5052: clean up serial data access USB: serial: ti_usb_3410_5052: fix port-close races USB: usblp: fix use-after-free on disconnect usb: udc: lpc32xx: fix bad bit shift operation usb: cdns3: Fix dequeue implementation. USB: legousbtower: fix a signedness bug in tower_probe() USB: legousbtower: fix memleak on disconnect USB: ldusb: fix memleak on disconnect
2019-10-26Merge branch 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds3-29/+48
Pull i2c fixes from Wolfram Sang: "A few driver fixes for the I2C subsystem" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: stm32f7: remove warning when compiling with W=1 i2c: stm32f7: fix a race in slave mode with arbitration loss irq i2c: stm32f7: fix first byte to send in slave mode i2c: mt65xx: fix NULL ptr dereference i2c: aspeed: fix master pending state handling
2019-10-26Merge tag 'for-linus-2019-10-26' of git://git.kernel.dk/linux-blockLinus Torvalds2-31/+48
Pull block and io_uring fixes from Jens Axboe: "A bit bigger than usual at this point in time, mostly due to some good bug hunting work by Pavel that resulted in three io_uring fixes from him and two from me. Anyway, this pull request contains: - Revert of the submit-and-wait optimization for io_uring, it can't always be done safely. It depends on commands always making progress on their own, which isn't necessarily the case outside of strict file IO. (me) - Series of two patches from me and three from Pavel, fixing issues with shared data and sequencing for io_uring. - Lastly, two timeout sequence fixes for io_uring (zhangyi) - Two nbd patches fixing races (Josef) - libahci regulator_get_optional() fix (Mark)" * tag 'for-linus-2019-10-26' of git://git.kernel.dk/linux-block: nbd: verify socket is supported during setup ata: libahci_platform: Fix regulator_get_optional() misuse nbd: handle racing with error'ed out commands nbd: protect cmd->status with cmd->lock io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD io_uring: used cached copies of sq->dropped and cq->overflow io_uring: Fix race for sqes with userspace io_uring: Fix broken links with offloading io_uring: Fix corrupted user_data io_uring: correct timeout req sequence when inserting a new entry io_uring : correct timeout req sequence when waiting timeout io_uring: revert "io_uring: optimize submit_and_wait API"
2019-10-26Merge tag 's390-5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds1-2/+1
Pull s390 fixes from Vasily Gorbik: - Add R_390_GLOB_DAT relocation type support. This fixes boot problem on linux-next. - Fix memory leak in zcrypt * tag 's390-5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/kaslr: add support for R_390_GLOB_DAT relocation type s390/zcrypt: fix memleak at release
2019-10-26Merge tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+9
Pull dma-mapping fix from Christoph Hellwig: "Fix a regression in the intel-iommu get_required_mask conversion (Arvind Sankar)" * tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mapping: iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU
2019-10-25Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds10-36/+36
Pull SCSI fixes from James Bottomley: "Nine changes, eight to drivers (qla2xxx, hpsa, lpfc, alua, ch, 53c710[x2], target) and one core change that tries to close a race between sysfs delete and module removal" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: remove left-over BUILD_NVME defines scsi: core: try to get module before removing device scsi: hpsa: add missing hunks in reset-patch scsi: target: core: Do not overwrite CDB byte 1 scsi: ch: Make it possible to open a ch device multiple times again scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE scsi: sni_53c710: fix compilation error scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions scsi: qla2xxx: fix a potential NULL pointer dereference
2019-10-25Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-2/+4
Pull input fix from Dmitry Torokhov: "A fix for st1232 driver to properly report coordinates for 2nd and subsequent fingers when more than one is on the surface" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: st1232 - fix reporting multitouch coordinates
2019-10-25nbd: verify socket is supported during setupMike Christie1-2/+21
nbd requires socket families to support the shutdown method so the nbd recv workqueue can be woken up from its sock_recvmsg call. If the socket does not support the callout we will leave recv works running or get hangs later when the device or module is removed. This adds a check during socket connection/reconnection to make sure the socket being passed in supports the needed callout. Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25ata: libahci_platform: Fix regulator_get_optional() misuseMark Brown1-24/+14
This driver is using regulator_get_optional() to handle all the supplies that it handles, and only ever enables and disables all supplies en masse without ever doing any other configuration of the device to handle missing power. These are clear signs that the API is being misused - it should only be used for supplies that may be physically absent from the system and in these cases the hardware usually needs different configuration if the supply is missing. Instead use normal regualtor_get(), if the supply is not described in DT then the framework will substitute a dummy regulator in so no special handling is needed by the consumer driver. In the case of the PHY regulator the handling in the driver is a hack to deal with integrated PHYs; the supplies are only optional in the sense that that there's some confusion in the code about where they're bound to. From a code point of view they function exactly as normal supplies so can be treated as such. It'd probably be better to model this by instantiating a PHY object for integrated PHYs. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25nbd: handle racing with error'ed out commandsJosef Bacik1-0/+6
We hit the following warning in production print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700 ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60 Workqueue: knbd-recv recv_work [nbd] RIP: 0010:refcount_sub_and_test_checked+0x53/0x60 Call Trace: blk_mq_free_request+0xb7/0xf0 blk_mq_complete_request+0x62/0xf0 recv_work+0x29/0xa1 [nbd] process_one_work+0x1f5/0x3f0 worker_thread+0x2d/0x3d0 ? rescuer_thread+0x340/0x340 kthread+0x111/0x130 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x1f/0x30 ---[ end trace b079c3c67f98bb7c ]--- This was preceded by us timing out everything and shutting down the sockets for the device. The problem is we had a request in the queue at the same time, so we completed the request twice. This can actually happen in a lot of cases, we fail to get a ref on our config, we only have one connection and just error out the command, etc. Fix this by checking cmd->status in nbd_read_stat. We only change this under the cmd->lock, so we are safe to check this here and see if we've already error'ed this command out, which would indicate that we've completed it as well. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25nbd: protect cmd->status with cmd->lockJosef Bacik1-5/+7
We already do this for the most part, except in timeout and clear_req. For the timeout case we take the lock after we grab a ref on the config, but that isn't really necessary because we're safe to touch the cmd at this point, so just move the order around. For the clear_req cause this is initiated by the user, so again is safe. Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-25Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-5/+15
Pull ARM SoC fixes from Olof Johansson: "A slightly larger set of fixes have accrued in the last two weeks. Mostly a collection of the usual smaller fixes: - Marvell Armada: USB phy setup issues on Turris Mox - Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some maintainer updates. - OMAP: Fixlets for display config, interrupt settings for wifi, some clock/PM pieces. Also IOMMU regression fix and a ti-sysc no-watchdog regression fix. - i.MX: A few fixes around PM/settings, some devicetree fixlets and catching up with config option changes in DRM - Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display panel settings ... and some smaller fixes for Davinci (backlight, McBSP DMA), Allwinner (phy regulators, PMU removal on A64, etc)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 MAINTAINERS: Update the Spreadtrum SoC maintainer MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue bus: ti-sysc: Fix watchdog quirk handling ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs ARM: davinci_all_defconfig: enable GPIO backlight ARM: davinci: dm365: Fix McBSP dma_slave_map entry ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk ARM: dts: imx7s: Correct GPT's ipg clock source ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' ARM: dts: imx6q-logicpd: Re-Enable SNVS power key arm64: dts: lx2160a: Correct CPU core idle state name mailmap: Add Simon Arlott (replacement for expired email address) arm64: dts: rockchip: Fix override mode for rk3399-kevin panel ...
2019-10-25Merge tag 'drm-fixes-2019-10-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds10-49/+96
Pull drm fixes from Dave Airlie: "Quiet week this week, which I suspect means some people just didn't get around to sending me fixes pulls in time. This has 2 komeda and a bunch of amdgpu fixes in it: komeda: - typo fixes - flushing pipes fix amdgpu: - Fix suspend/resume issue related to multi-media engines - Fix memory leak in user ptr code related to hmm conversion - Fix possible VM faults when allocating page table memory - Fix error handling in bo list ioctl" * tag 'drm-fixes-2019-10-25' of git://anongit.freedesktop.org/drm/drm: drm/komeda: Fix typos in komeda_splitter_validate drm/komeda: Don't flush inactive pipes drm/amdgpu/vce: fix allocation size in enc ring test drm/amdgpu: fix error handling in amdgpu_bo_list_create drm/amdgpu: fix potential VM faults drm/amdgpu: user pages array memory leak fix drm/amdgpu/vcn: fix allocation size in enc ring test drm/amdgpu/uvd7: fix allocation size in enc ring test (v2) drm/amdgpu/uvd6: fix allocation size in enc ring test (v2)
2019-10-25Merge tag 'mmc-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds3-5/+7
Pull MMC fixes from Ulf Hansson: "MMC host fixes: - mxs: Fix flags passed to dmaengine_prep_slave_sg - cqhci: Add a missing memory barrier - sdhci-omap: Fix tuning procedure for temperatures < -20C" * tag 'mmc-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mxs: fix flags passed to dmaengine_prep_slave_sg mmc: cqhci: Commit descriptors before setting the doorbell mmc: sdhci-omap: Fix Tuning procedure for temperatures < -20C
2019-10-25Merge tag 'irqchip-fixes-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgentThomas Gleixner2-5/+20
Pull the second lot of irqchip updates for 5.4 from Marc Zyngier: - Sifive PLIC: force driver to skip non-relevant contexts - GICv4: Don't send VMOVP commands to ITSs that don't have this vPE mapped
2019-10-25irqchip/sifive-plic: Skip contexts except supervisor in plic_init()Alan Mikhak1-2/+2
Modify plic_init() to skip .dts interrupt contexts other than supervisor external interrupt. The .dts entry for plic may specify multiple interrupt contexts. For example, it may assign two entries IRQ_M_EXT and IRQ_S_EXT, in that order, to the same interrupt controller. This patch modifies plic_init() to skip the IRQ_M_EXT context since IRQ_S_EXT is currently the only supported context. If IRQ_M_EXT is not skipped, plic_init() will report "handler already present for context" when it comes across the IRQ_S_EXT context in the next iteration of its loop. Without this patch, .dts would have to be edited to replace the value of IRQ_M_EXT with -1 for it to be skipped. Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv Link: https://lkml.kernel.org/r/1571933503-21504-1-git-send-email-alan.mikhak@sifive.com
2019-10-25Merge tag 'drm-fixes-5.4-2019-10-23' of git://people.freedesktop.org/~agd5f/linux into drm-fixesDave Airlie8-46/+92
drm-fixes-5.4-2019-10-23: amdgpu: - Fix suspend/resume issue related to multi-media engines - Fix memory leak in user ptr code related to hmm conversion - Fix possible VM faults when allocating page table memory - Fix error handling in bo list ioctl Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191024031809.3155-1-alexander.deucher@amd.com
2019-10-25Merge tag 'drm-misc-fixes-2019-10-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixesDave Airlie2-3/+4
Two fixes for komeda, one for typos and one to prevent an hardware issue when flushing inactive pipes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191023112643.evpp6f23mpjwdsn4@gilmour
2019-10-24Merge tag 'devicetree-fixes-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds2-1/+4
Pull Devicetree fixes from Rob Herring: "A couple more DT fixes for 5.4: fix a ref count, memory leak, and Risc-V cpu schema warnings" * tag 'devicetree-fixes-for-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: reserved_mem: add missing of_node_put() for proper ref-counting of: unittest: fix memory leak in unittest_data_add dt-bindings: riscv: Fix CPU schema errors
2019-10-24Merge tag 'acpi-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds1-1/+1
Pull ACPI fix from Rafael Wysocki: "Fix locking issue in the error code path of a function that belongs to the sysfs interface exposed by the ACPI NFIT handling code (Dan Carpenter)" * tag 'acpi-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: NFIT: Fix unlock on error in scrub_show()
2019-10-24Merge tag 'pm-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds12-185/+118
Pull power management fixes from Rafael Wysocki: "These fix problems related to frequency limits management in cpufreq that were introduced during the 5.3 cycle (when PM QoS had started to be used for that), fix a few issues in the OPP (operating performance points) library code and fix up the recently added haltpoll cpuidle driver. The cpufreq changes are somewhat bigger that I would like them to be at this stage of the cycle, but the problems fixed by them include crashes on boot and shutdown in some cases (among other things) and in my view it is better to address the root of the issue right away. Specifics: - Using device PM QoS of CPU devices for managing frequency limits in cpufreq does not work, so introduce frequency QoS (based on the original low-level PM QoS) for this purpose, switch cpufreq and related code over to using it and fix a race involving deferred updates of frequency limits on top of that (Rafael Wysocki, Sudeep Holla). - Avoid calling regulator_enable()/disable() from the OPP framework to avoid side-effects on boot-enabled regulators that may change their initial voltage due to performing initial voltage balancing without all restrictions from the consumers (Marek Szyprowski). - Avoid a kref management issue in the OPP library code and drop an incorrectly added lockdep_assert_held() from it (Viresh Kumar). - Make the recently added haltpoll cpuidle driver take the 'idle=' override into account as appropriate (Zhenzhong Duan)" * tag 'pm-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: opp: Reinitialize the list_kref before adding the static OPPs again cpufreq: Cancel policy update work scheduled before freeing cpuidle: haltpoll: Take 'idle=' override into account opp: core: Revert "add regulators enable and disable" PM: QoS: Drop frequency QoS types from device PM QoS cpufreq: Use per-policy frequency QoS PM: QoS: Introduce frequency QoS opp: of: drop incorrect lockdep_assert_held()
2019-10-24i2c: stm32f7: remove warning when compiling with W=1Alain Volmat1-1/+1
Remove the following warning: drivers/i2c/busses/i2c-stm32f7.c:315: warning: cannot understand function prototype: 'struct stm32f7_i2c_spec i2c_specs[] = Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: stm32f7: fix a race in slave mode with arbitration loss irqFabrice Gasnier1-7/+10
When in slave mode, an arbitration loss (ARLO) may be detected before the slave had a chance to detect the stop condition (STOPF in ISR). This is seen when two master + slave adapters switch their roles. It provokes the i2c bus to be stuck, busy as SCL line is stretched. - the I2C_SLAVE_STOP event is never generated due to STOPF flag is set but don't generate an irq (race with ARLO irq, STOPIE is masked). STOPF flag remains set until next master xfer (e.g. when STOPIE irq get unmasked). In this case, completion is generated too early: immediately upon new transfer request (then it doesn't send all data). - Some data get stuck in TXDR register. As a consequence, the controller stretches the SCL line: the bus gets busy until a future master transfer triggers the bus busy / recovery mechanism (this can take time... and may never happen at all) So choice is to let the STOPF being detected by the slave isr handler, to properly handle this stop condition. E.g. don't mask IRQs in error handler, when the slave is running. Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: stm32f7: fix first byte to send in slave modeFabrice Gasnier1-0/+2
The slave-interface documentation [1] states "the bus driver should transmit the first byte" upon I2C_SLAVE_READ_REQUESTED slave event: - 'val': backend returns first byte to be sent The driver currently ignores the 1st byte to send on this event. [1] https://www.kernel.org/doc/Documentation/i2c/slave-interface Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: mt65xx: fix NULL ptr dereferenceFabien Parent1-1/+1
Since commit abf4923e97c3 ("i2c: mediatek: disable zero-length transfers for mt8183"), there is a NULL pointer dereference for all the SoCs that don't have any quirk. mtk_i2c_functionality is not checking that the quirks pointer is not NULL before starting to use it. This commit add a call to i2c_check_quirks which will check whether the quirks pointer is set, and if so will check if the IP has the NO_ZERO_LEN quirk. Fixes: abf4923e97c3 ("i2c: mediatek: disable zero-length transfers for mt8183") Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Cengiz Can <cengiz@kernel.wtf> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Ulrich Hecht <uli@fpond.eu> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24irqchip/gic-v3-its: Use the exact ITSList for VMOVPZenghui Yu1-3/+18
On a system without Single VMOVP support (say GITS_TYPER.VMOVP == 0), we will map vPEs only on ITSs that will actually control interrupts for the given VM. And when moving a vPE, the VMOVP command will be issued only for those ITSs. But when issuing VMOVPs we seemed fail to present the exact ITSList to ITSs who are actually included in the synchronization operation. The its_list_map we're currently using includes all ITSs in the system, even though some of them don't have the corresponding vPE mapping at all. Introduce get_its_list() to get the per-VM its_list_map, to indicate which ITSs have vPE mappings for the given VM, and use this map as the expected ITSList when building VMOVP. This is hopefully a performance gain not to do some synchronization with those unsuspecting ITSs. And initialize the whole command descriptor to zero at beginning, since the seq_num and its_list should be RES0 when GITS_TYPER.VMOVP == 1. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1571802386-2680-1-git-send-email-yuzenghui@huawei.com
2019-10-24Merge branches 'pm-cpuidle' and 'pm-opp'Rafael J. Wysocki3-15/+14
* pm-cpuidle: cpuidle: haltpoll: Take 'idle=' override into account * pm-opp: opp: Reinitialize the list_kref before adding the static OPPs again opp: core: Revert "add regulators enable and disable" opp: of: drop incorrect lockdep_assert_held()
2019-10-24Merge tag 'mfd-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds1-24/+40
Pull MFD fix from Lee Jones: "Fix broken support for BananaPi-r2" * tag 'mfd-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: mt6397: Fix probe after changing mt6397-core
2019-10-24mfd: mt6397: Fix probe after changing mt6397-coreFrank Wunderlich1-24/+40
Part 3 from this series [1] was not merged due to wrong splitting and breaks mt6323 pmic on bananapi-r2 dmesg prints this line and at least switch is not initialized on bananapi-r2 mt6397 1000d000.pwrap:mt6323: unsupported chip: 0x0 this patch contains only the probe-changes and chip_data structs from original part 3 by Hsin-Hsiung Wang [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=164155 Fixes: a4872e80ce7d ("mfd: mt6397: Extract IRQ related code from core driver") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-23Input: adp5589 - make keypad support optionalLars-Peter Clausen1-73/+98
On some platforms the adp5589 is used in GPIO only mode. On these platforms we do not want to register a input device, so make that optional and only create the input device if a keymap is supplied. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20191023070541.13940-1-alexandru.ardelean@analog.com [dtor: dropped unnecessary changes related to passing pdata to various functions] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-23Input: hp_sdc_rtc - remove dead chardev codeArnd Bergmann1-342/+0
The driver contains half of the implementation of /dev/rtc, but this was never completed, and it is now incompatible with the drivers/rtc framework. Remove the chardev completely. If anyone wants to add the functionality later, that shoudl be done through rtc_register_device(). The remaining portions of the driver basically implement a single procfs file that may or may not be used anywhere. Not sure why this is in drivers/input/ though. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/20191023142521.3643152-1-arnd@arndb.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-23of: reserved_mem: add missing of_node_put() for proper ref-countingChris Goldsworthy1-1/+3
Commit d698a388146c ("of: reserved-memory: ignore disabled memory-region nodes") added an early return in of_reserved_mem_device_init_by_idx(), but didn't call of_node_put() on a device_node whose ref-count was incremented in the call to of_parse_phandle() preceding the early exit. Fixes: d698a388146c ("of: reserved-memory: ignore disabled memory-region nodes") Signed-off-by: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: stable@vger.kernel.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2019-10-23of: unittest: fix memory leak in unittest_data_addNavid Emamdoost1-0/+1
In unittest_data_add, a copy buffer is created via kmemdup. This buffer is leaked if of_fdt_unflatten_tree fails. The release for the unittest_data buffer is added. Fixes: b951f9dc7f25 ("Enabling OF selftest to run without machine's devicetree") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.