Age | Commit message (Collapse) | Author | Files | Lines |
|
Currently, the implementation of qcom_iommu_domain_free() is guaranteed
to do one of two things: WARN() and leak everything, or dereference NULL
and crash. That alone is terrible, but in fact the whole idea of trying
to track the liveness of a domain via the qcom_domain->iommu pointer as
a sanity check is full of fundamentally flawed assumptions. Make things
robust and actually functional by not trying to be quite so clever.
Reported-by: Brian Masney <masneyb@onstation.org>
Tested-by: Brian Masney <masneyb@onstation.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Serious screen flickering when Stoney Ridge outputs to a 4K monitor.
Use identity-mapping and PCI ATS doesn't help this issue.
According to Alex Deucher, IOMMU isn't enabled on Windows, so let's do
the same here to avoid screen flickering on 4K monitor.
Cc: Alex Deucher <alexander.deucher@amd.com>
Bug: https://gitlab.freedesktop.org/drm/amd/issues/961
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
On flow table creation, send the relevant flags according to what the FW
currently supports.
When FW doesn't support reformat option over SW-steering managed table,
the driver shouldn't pass this.
Fixes: 988fd6b32d07 ("net/mlx5: DR, Pass table flags at creation to lower layer")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The pool sizes represent the pool sizes in the fw. when we request
a pool size from fw, it will return the next possible group.
We track how many pools the fw has left and start requesting groups
from the big to the small.
When we start request 4k group, which doesn't exists in fw, fw
wants to allocate the next possible size, 64k, but will fail since
its exhausted. The correct smallest pool size in fw is 128 and not 4k.
Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
There is no need to reset all vf config (except link state) between
legacy and switchdev modes changes.
Also, set link state to AUTO, when legacy enabled.
Fixes: 3b83b6c2e024 ("net/mlx5e: Clear VF config when switching modes")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Set vport gvmi in the tag, only when source gvmi is set in the bit mask.
Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When health reporters are not supported, recovery function is invoked
directly, not via devlink health reporters.
In this direct flow, the recover function input parameter was passed
incorrectly and is causing a kernel oops. This patch is fixing the input
parameter.
Following call trace is observed on rx error health reporting.
Internal error: Oops: 96000007 [#1] PREEMPT SMP
Process kworker/u16:4 (pid: 4584, stack limit = 0x00000000c9e45703)
Call trace:
mlx5e_rx_reporter_err_rq_cqe_recover+0x30/0x164 [mlx5_core]
mlx5e_health_report+0x60/0x6c [mlx5_core]
mlx5e_reporter_rq_cqe_err+0x6c/0x90 [mlx5_core]
mlx5e_rq_err_cqe_work+0x20/0x2c [mlx5_core]
process_one_work+0x168/0x3d0
worker_thread+0x58/0x3d0
kthread+0x108/0x134
Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Initialize RQ doorbell counters to zero prior to moving an RQ from RST
to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor
ID on the completion is reset. The doorbell record must comply.
Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa
cannot take mutex lock. Two possible issues can happen:
1. User at the same time change vepa mode via RTM_SETLINK command.
2. User at the same time change the switchdev mode via devlink netlink
interface.
Case 1 cannot happen because rtnl executes one message in order.
Case 2 can happen but we do not expect user to change the switchdev mode
when changing vepa. Even if a user does it, so he will read a value
which is no longer valid.
Fixes: 8da202b24913 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If an event is added while the rdma workqueue is being destroyed
it could lead to several races, list corruption, null pointer
dereference during queue_work or init_queue.
This fixes the race between the two flows which can occur during
shutdown.
A kref object and a completion object are added to the rdma_dev
structure, these are initialized before the workqueue is created.
The refcnt is used to indicate work is being added to the
workqueue and ensures the cleanup flow won't start while we're in
the middle of adding the event.
Once the work is added, the refcnt is decreased and the cleanup flow
is safe to run.
Fixes: cee9fbd8e2e ("qede: Add qedr framework")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function only has one call-site and there it is never called with
dummy or deferred devices. Simplify the check in the function to
account for that.
Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The function is now only a wrapper around find_domain(). Remove the
function and call find_domain() directly at the call-sites.
Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The attachment of deferred devices needs to happen before the check
whether the device is identity mapped or not. Otherwise the check will
return wrong results, cause warnings boot failures in kdump kernels, like
WARNING: CPU: 0 PID: 318 at ../drivers/iommu/intel-iommu.c:592 domain_get_iommu+0x61/0x70
[...]
Call Trace:
__intel_map_single+0x55/0x190
intel_alloc_coherent+0xac/0x110
dmam_alloc_attrs+0x50/0xa0
ahci_port_start+0xfb/0x1f0 [libahci]
ata_host_start.part.39+0x104/0x1e0 [libata]
With the earlier check the kdump boot succeeds and a crashdump is written.
Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Move the code that does the deferred device attachment into a separate
helper function.
Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Implement a helper function to check whether a device's attach process
is deferred.
Fixes: 1ee0186b9a12 ("iommu/vt-d: Refactor find_domain() helper")
Cc: stable@vger.kernel.org # v5.5
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
We manipulate ring->head while active in i915_request_retire underneath
the timeline manipulation. We cannot rely on a stable ring->head outside
of the timeline->mutex, in particular while setting up the context for
resume and reset.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1126
Fixes: 0881954965e3 ("drm/i915: Introduce intel_context.pin_mutex for pin management")
Fixes: e5dadff4b093 ("drm/i915: Protect request retirement with timeline->mutex")
References: f3c0efc9fe7a ("drm/i915/execlists: Leave resetting ring to intel_ring")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211120131.958949-1-chris@chris-wilson.co.uk
(cherry picked from commit 42827350f75c56d0fe9f15d8425a1390528958b6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
If we rewind the RING_TAIL on a context, due to a preemption event, we
must force the context restore for the RING_TAIL update to be properly
handled. Rather than note which preemption events may cause us to rewind
the tail, compare the new request's tail with the previously submitted
RING_TAIL, as it turns out that timeslicing was causing unexpected
rewinds.
<idle>-0 0d.s2 1280851190us : __execlists_submission_tasklet: 0000:00:02.0 rcs0: expired last=130:4698, prio=3, hint=3
<idle>-0 0d.s2 1280851192us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 66:119966, current 119964
<idle>-0 0d.s2 1280851195us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4698, current 4695
<idle>-0 0d.s2 1280851198us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4696, current 4695
^---- Note we unwind 2 requests from the same context
<idle>-0 0d.s2 1280851208us : __i915_request_submit: 0000:00:02.0 rcs0: fence 130:4696, current 4695
<idle>-0 0d.s2 1280851213us : __i915_request_submit: 0000:00:02.0 rcs0: fence 134:1508, current 1506
^---- But to apply the new timeslice, we have to replay the first request
before the new client can start -- the unexpected RING_TAIL rewind
<idle>-0 0d.s2 1280851219us : trace_ports: 0000:00:02.0 rcs0: submit { 130:4696*, 134:1508 }
synmark2-5425 2..s. 1280851239us : process_csb: 0000:00:02.0 rcs0: cs-irq head=5, tail=0
synmark2-5425 2..s. 1280851240us : process_csb: 0000:00:02.0 rcs0: csb[0]: status=0x00008002:0x00000000
^---- Preemption event for the ELSP update; note the lite-restore
synmark2-5425 2..s. 1280851243us : trace_ports: 0000:00:02.0 rcs0: preempted { 130:4698, 66:119966 }
synmark2-5425 2..s. 1280851246us : trace_ports: 0000:00:02.0 rcs0: promote { 130:4696*, 134:1508 }
synmark2-5425 2.... 1280851462us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4700, current 4695
synmark2-5425 2.... 1280852111us : __i915_request_commit: 0000:00:02.0 rcs0: fence 130:4702, current 4695
synmark2-5425 2.Ns1 1280852296us : process_csb: 0000:00:02.0 rcs0: cs-irq head=0, tail=2
synmark2-5425 2.Ns1 1280852297us : process_csb: 0000:00:02.0 rcs0: csb[1]: status=0x00000814:0x00000000
synmark2-5425 2.Ns1 1280852299us : trace_ports: 0000:00:02.0 rcs0: completed { 130:4696!, 134:1508 }
synmark2-5425 2.Ns1 1280852301us : process_csb: 0000:00:02.0 rcs0: csb[2]: status=0x00000818:0x00000040
synmark2-5425 2.Ns1 1280852302us : trace_ports: 0000:00:02.0 rcs0: completed { 134:1508, 0:0 }
synmark2-5425 2.Ns1 1280852313us : process_csb: process_csb:2336 GEM_BUG_ON(!i915_request_completed(*execlists->active) && !reset_in_progress(execlists))
Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Referenecs: 82c69bf58650 ("drm/i915/gt: Detect if we miss WaIdleLiteRestore")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://patchwork.freedesktop.org/patch/msgid/20200207211452.2860634-1-chris@chris-wilson.co.uk
(cherry picked from commit 5ba32c7be81e53ea8a27190b0f6be98e6c6779af)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
drm_pci_alloc and drm_pci_free are just very thin wrappers around
dma_alloc_coherent, with a note that we should be removing them.
Furthermore since
commit de09d31dd38a50fdce106c15abd68432eebbd014
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date: Fri Jan 15 16:51:42 2016 -0800
page-flags: define PG_reserved behavior on compound pages
As far as I can see there's no users of PG_reserved on compound pages.
Let's use PF_NO_COMPOUND here.
drm_pci_alloc has been declared broken since it mixes GFP_COMP and
SetPageReserved. Avoid this conflict by weaning ourselves off using the
abstraction and using the dma functions directly.
Reported-by: Taketo Kabe
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1027
Fixes: de09d31dd38a ("page-flags: define PG_reserved behavior on compound pages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202153934.3899472-1-chris@chris-wilson.co.uk
(cherry picked from commit c6790dc22312f592c1434577258b31c48c72d52a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The reserved member should be named reserved3.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted
by reading chuncks of 4 bytes from a register.
In case the IFH and frames were read corretly it would try to read the next
frame. In case there are no more frames in the queue, it checks if there
were any previous errors and in that case clear the queue. But this check
will always succeed also when there are no errors. Because when extracting
the IFH the error is checked against 4(number of bytes read) and then the
error is set only if the extraction of the frame failed. So in a happy case
where there are no errors the err variable is still 4. So it could be
a case where after the check that there are no more frames in the queue, a
frame will arrive in the queue but because the error is not reseted, it
would try to flush the queue. So the frame will be lost.
The fix consist in resetting the error after reading the IFH.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mika spotted
<4>[17436.705441] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4>[17436.705447] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.5.0+ #1
<4>[17436.705449] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3805 05/16/2018
<4>[17436.705512] RIP: 0010:__execlists_submission_tasklet+0xc4d/0x16e0 [i915]
<4>[17436.705516] Code: c5 4c 8d 60 e0 75 17 e9 8c 07 00 00 49 8b 44 24 20 49 39 c5 4c 8d 60 e0 0f 84 7a 07 00 00 49 8b 5c 24 08 49 8b 87 80 00 00 00 <48> 39 83 d8 fe ff ff 75 d9 48 8b 83 88 fe ff ff a8 01 0f 84 b6 05
<4>[17436.705518] RSP: 0018:ffffc9000012ce80 EFLAGS: 00010083
<4>[17436.705521] RAX: ffff88822ae42000 RBX: 5a5a5a5a5a5a5a5a RCX: dead000000000122
<4>[17436.705523] RDX: ffff88822ae42588 RSI: ffff8881e32a7908 RDI: ffff8881c429fd48
<4>[17436.705525] RBP: ffffc9000012cf00 R08: ffff88822ae42588 R09: 00000000fffffffe
<4>[17436.705527] R10: ffff8881c429fb80 R11: 00000000a677cf08 R12: ffff8881c42a0aa8
<4>[17436.705529] R13: ffff8881c429fd38 R14: ffff88822ae42588 R15: ffff8881c429fb80
<4>[17436.705532] FS: 0000000000000000(0000) GS:ffff88822ed00000(0000) knlGS:0000000000000000
<4>[17436.705534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[17436.705536] CR2: 00007f858c76d000 CR3: 0000000005610003 CR4: 00000000003606e0
<4>[17436.705538] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[17436.705540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
<4>[17436.705542] Call Trace:
<4>[17436.705545] <IRQ>
<4>[17436.705603] execlists_submission_tasklet+0xc0/0x130 [i915]
which is us consuming a partially initialised new waiter in
defer_requests(). We can prevent this by initialising the i915_dependency
prior to making it visible, and since we are using a concurrent
list_add/iterator mark them up to the compiler.
Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206204915.2636606-2-chris@chris-wilson.co.uk
(cherry picked from commit f14f27b1663269a81ed62d3961fe70250a1a0623)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Virtual engines are fleeting. They carry a reference count and may be freed
when their last request is retired. This makes them unsuitable for the
task of housing engine->retire.work so assert that it is not used.
Tvrtko tracked down an instance where we did indeed violate this rule.
In virtual_submit_request, we flush a completed request directly with
__i915_request_submit and this causes us to queue that request on the
veng's breadcrumb list and signal it. Leading us down a path where we
should not attach the retire.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: dc93c9b69315 ("drm/i915/gt: Schedule request retirement when signaler idles")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206204915.2636606-1-chris@chris-wilson.co.uk
(cherry picked from commit f91d8156ab8afb32447cd2bf3189219bab943f18)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We lack full state readout of DSC config, which may lead to DSC enable
using a config that's all zeros, failing spectacularly. Force full
modeset and thus compute config at probe to get a sane state, until we
implement DSC state readout. Any fastset that did appear to work with
DSC at probe, worked by coincidence. [1] is an example of a change that
triggered the issue on TGL DSI DSC.
[1] http://patchwork.freedesktop.org/patch/msgid/20200212150102.7600-1-ville.syrjala@linux.intel.com
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: fbacb15ea814 ("drm/i915/dsc: add basic hardware state readout support")
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-3-stanislav.lisovskiy@intel.com
(cherry picked from commit a4277aa398d76db109d6b8420934f68daf69a6c3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Voltage level depends not only on the cdclk, but also on the DDI clock.
Last time the bspec voltage level table for EHL was updated, we only
updated the cdclk requirements, but forgot to account for the new port
clock criteria.
Bspec: 21809
Fixes: d147483884ed ("drm/i915/ehl: Update voltage level checks")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207001417.1229251-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 9d5fd37ed7e26efdbe90f492d7eb8b53dcdb61d6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We've moved from bugzilla to gitlab.
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212160434.6437-2-jani.nikula@intel.com
(cherry picked from commit ddae4d7af0bbe3b2051f1603459a8b24e9a19324)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
chip->allocated_banks, an array of tpm_bank_info structures, contains the
list of TPM algorithm IDs of allocated PCR banks. It also contains the
corresponding ID of the crypto subsystem, so that users of the TPM driver
can calculate a digest for a PCR extend operation.
However, if there is no mapping between TPM algorithm ID and crypto ID, the
crypto_id field of tpm_bank_info remains set to zero (the array is
allocated and initialized with kcalloc() in tpm2_get_pcr_allocation()).
Zero should not be used as value for unknown mappings, as it is a valid
crypto ID (HASH_ALGO_MD4).
Thus, initialize crypto_id to HASH_ALGO__LAST.
Cc: stable@vger.kernel.org # 5.1.x
Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Revert tpm_tis_spi_mod.ko back to tpm_tis_spi.ko as the rename could
break user space scripts. This can be achieved by renaming tpm_tis_spi.c
as tpm_tis_spi_main.c. Then tpm_tis_spi-y can be used inside the
makefile.
Cc: Andrey Pronin <apronin@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: stable@vger.kernel.org # 5.5.x
Fixes: 797c0113c9a4 ("tpm: tpm_tis_spi: Support cr50 devices")
Reported-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Inside the intel_timeline_get_seqno(), we currently track the retirement
of the old cachelines by listening to the new request. This requires
that the new request is ready to be used and so requires a minimum bit
of initialisation prior to getting the new seqno.
Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203094152.4150550-2-chris@chris-wilson.co.uk
(cherry picked from commit 855e39e65cfc33a73724f1cc644ffc5754864a20)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
To enable non-persistent contexts, we require a means of cancelling any
inflight work from that context. This is first done "gracefully" by
using preemption to kick the active context off the engine, and then
forcefully by resetting the engine if it is active. If we are unable to
reset the engine to remove hostile userspace, we should not allow
userspace to opt into using non-persistent contexts.
If the per-engine reset fails, we still do a full GPU reset, but that is
rare and usually indicative of much deeper issues. The damage is already
done. However, the goal of the interface to allow long running compute
jobs without causing collateral damage elsewhere, and if we are unable
to support that we should make that known by not providing the
interface (and falsely pretending we can).
Fixes: a0e047156cde ("drm/i915/gem: Make context persistence optional")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130164553.1937718-1-chris@chris-wilson.co.uk
(cherry picked from commit d1b9b5f127bc3797fc274cfa4f363e039f045c3a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Since commit 057b52b4b3d58 ("watchdog: da9062: make restart handler atomic
safe"), the driver calls i2c functions directly. It now therefore depends
on I2C. This is a hard dependency which overrides COMPILE_TEST.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 057b52b4b3d58 ("watchdog: da9062: make restart handler atomic safe")
Cc: Marco Felsch <m.felsch@pengutronix.de>
Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Cc: Stefan Lengfeld <contact@stefanchrist.eu>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This fixes commit f6c98b08381c ("watchdog: da9062: add power management
ops"). During discussion [1] we agreed that this should be configurable
because it is a device quirk if we can't use the hw watchdog auto
suspend function.
[1] https://lore.kernel.org/linux-watchdog/20191128171931.22563-1-m.felsch@pengutronix.de/
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Fixes: f6c98b08381c ("watchdog: da9062: add power management ops")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200207071518.5559-1-m.felsch@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The da9062 hw has a minimum ping cool down phase of at least 200ms. The
driver takes that into account by setting the min_hw_heartbeat_ms to
300ms and the core guarantees that the hw limit is observed for the
ping() calls. But the core can't guarantee the required minimum ping
cool down phase if a stop() command is send immediately after the ping()
command. So it is not allowed to ping the watchdog within the stop()
command as the driver does. Remove the ping can be done without doubts
because the watchdog gets disabled anyway and a (re)start resets the
watchdog counter too.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de
[groeck: Updated description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Fix build error when CONFIG_RESET_CONTROLLER is not set by
selecting RESET_CONTROLLER.
ld: drivers/watchdog/mtk_wdt.o: in function `mtk_wdt_probe':
mtk_wdt.c:(.text+0x3ec): undefined reference to `devm_reset_controller_register'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: c254e103082b74e ("watchdog: mtk_wdt: mt8183: Add reset controller")
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-watchdog@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/77c1e557-4941-3806-2933-6c3583576390@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add a new device id for the 100 devie. It has 4 interfaces like the 28
and 28L devices but a larger endpoint so more I/O pins.
Cc: Christoph Jung <jung@codemercs.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200214161148.GA3963518@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While certain modeset operations on gv100+ need us to temporarily
disable the LUT, we make the mistake of sometimes neglecting to
reprogram the LUT after such modesets. In particular, moving a head from
one encoder to another seems to trigger this quite often. GV100+ is very
picky about having a LUT in most scenarios, so this causes the display
engine to hang with the following error code:
disp: chid 1 stat 00005080 reason 5 [INVALID_STATE] mthd 0200 data
00000001 code 0000002d)
So, fix this by always re-programming the LUT if we're clearing it in a
state where the wndw is still visible, and has a XLUT handle programmed.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: facaed62b4cb ("drm/nouveau/kms/gv100: initial support")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The call to of_get_mac_address() can return -EPROBE_DEFER, for instance
when the MAC address is read from a NVMEM driver that did not probe yet.
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Micrel KSZ8851-16MLLI datasheet DS00002357B page 12 states that
BE[3:0] signals are active high. This contradicts the measurements
of the behavior of the actual chip, where these signals behave as
active low. For example, to read the CIDER register, the bus must
expose 0xc0c0 during the address phase, which means BE[3:0]=4'b1100.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The packet data written to and read from Micrel KSZ8851-16MLLI must be
byte-swapped in 16-bit mode, add this byte-swapping.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver is mixing 8-bit and 16-bit bus accessors for reasons unknown,
however the speculation is that this was some sort of attempt to support
the 8-bit bus mode.
As per the KS8851-16MLL documentation, all two registers accessed via the
8-bit accessors are internally 16-bit registers, so reading them using
16-bit accessors is fine. The KS_CCR read can be converted to 16-bit read
outright, as it is already a concatenation of two 8-bit reads of that
register. The KS_RXQCR accesses are 8-bit only, however writing the top
8 bits of the register is OK as well, since the driver caches the entire
16-bit register value anyway.
Finally, the driver is not used by any hardware in the kernel right now.
The only hardware available to me is one with 16-bit bus, so I have no
way to test the 8-bit bus mode, however it is unlikely this ever really
worked anyway. If the 8-bit bus mode is ever required, it can be easily
added by adjusting the 16-bit accessors to do 2 consecutive accesses,
which is how this should have been done from the beginning.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the "struct bonding", there is stats_lock.
This lock protects "bond_stats" in the "struct bonding".
bond_stats is updated in the bond_get_stats() and this function would be
executed concurrently. So, the lock is needed.
Bonding interfaces would be nested.
So, either stats_lock should use dynamic lockdep class key or stats_lock
should be used by spin_lock_nested(). In the current code, stats_lock is
using a dynamic lockdep class key.
But there is no updating stats_lock_key routine So, lockdep warning
will occur.
Test commands:
ip link add bond0 type bond
ip link add bond1 type bond
ip link set bond0 master bond1
ip link set bond0 nomaster
ip link set bond1 master bond0
Splat looks like:
[ 38.420603][ T957] 5.5.0+ #394 Not tainted
[ 38.421074][ T957] ------------------------------------------------------
[ 38.421837][ T957] ip/957 is trying to acquire lock:
[ 38.422399][ T957] ffff888063262cd8 (&bond->stats_lock_key#2){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[ 38.423528][ T957]
[ 38.423528][ T957] but task is already holding lock:
[ 38.424526][ T957] ffff888065fd2cd8 (&bond->stats_lock_key){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[ 38.426075][ T957]
[ 38.426075][ T957] which lock already depends on the new lock.
[ 38.426075][ T957]
[ 38.428536][ T957]
[ 38.428536][ T957] the existing dependency chain (in reverse order) is:
[ 38.429475][ T957]
[ 38.429475][ T957] -> #1 (&bond->stats_lock_key){+.+.}:
[ 38.430273][ T957] _raw_spin_lock+0x30/0x70
[ 38.430812][ T957] bond_get_stats+0x90/0x4d0 [bonding]
[ 38.431451][ T957] dev_get_stats+0x1ec/0x270
[ 38.432088][ T957] bond_get_stats+0x1a5/0x4d0 [bonding]
[ 38.432767][ T957] dev_get_stats+0x1ec/0x270
[ 38.433322][ T957] rtnl_fill_stats+0x44/0xbe0
[ 38.433866][ T957] rtnl_fill_ifinfo+0xeb2/0x3720
[ 38.434474][ T957] rtmsg_ifinfo_build_skb+0xca/0x170
[ 38.435081][ T957] rtmsg_ifinfo_event.part.33+0x1b/0xb0
[ 38.436848][ T957] rtnetlink_event+0xcd/0x120
[ 38.437455][ T957] notifier_call_chain+0x90/0x160
[ 38.438067][ T957] netdev_change_features+0x74/0xa0
[ 38.438708][ T957] bond_compute_features.isra.45+0x4e6/0x6f0 [bonding]
[ 38.439522][ T957] bond_enslave+0x3639/0x47b0 [bonding]
[ 38.440225][ T957] do_setlink+0xaab/0x2ef0
[ 38.440786][ T957] __rtnl_newlink+0x9c5/0x1270
[ 38.441463][ T957] rtnl_newlink+0x65/0x90
[ 38.442075][ T957] rtnetlink_rcv_msg+0x4a8/0x890
[ 38.442774][ T957] netlink_rcv_skb+0x121/0x350
[ 38.443451][ T957] netlink_unicast+0x42e/0x610
[ 38.444282][ T957] netlink_sendmsg+0x65a/0xb90
[ 38.444992][ T957] ____sys_sendmsg+0x5ce/0x7a0
[ 38.445679][ T957] ___sys_sendmsg+0x10f/0x1b0
[ 38.446365][ T957] __sys_sendmsg+0xc6/0x150
[ 38.447007][ T957] do_syscall_64+0x99/0x4f0
[ 38.447668][ T957] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 38.448538][ T957]
[ 38.448538][ T957] -> #0 (&bond->stats_lock_key#2){+.+.}:
[ 38.449554][ T957] __lock_acquire+0x2d8d/0x3de0
[ 38.450148][ T957] lock_acquire+0x164/0x3b0
[ 38.450711][ T957] _raw_spin_lock+0x30/0x70
[ 38.451292][ T957] bond_get_stats+0x90/0x4d0 [bonding]
[ 38.451950][ T957] dev_get_stats+0x1ec/0x270
[ 38.452425][ T957] bond_get_stats+0x1a5/0x4d0 [bonding]
[ 38.453362][ T957] dev_get_stats+0x1ec/0x270
[ 38.453825][ T957] rtnl_fill_stats+0x44/0xbe0
[ 38.454390][ T957] rtnl_fill_ifinfo+0xeb2/0x3720
[ 38.456257][ T957] rtmsg_ifinfo_build_skb+0xca/0x170
[ 38.456998][ T957] rtmsg_ifinfo_event.part.33+0x1b/0xb0
[ 38.459351][ T957] rtnetlink_event+0xcd/0x120
[ 38.460086][ T957] notifier_call_chain+0x90/0x160
[ 38.460829][ T957] netdev_change_features+0x74/0xa0
[ 38.461752][ T957] bond_compute_features.isra.45+0x4e6/0x6f0 [bonding]
[ 38.462705][ T957] bond_enslave+0x3639/0x47b0 [bonding]
[ 38.463476][ T957] do_setlink+0xaab/0x2ef0
[ 38.464141][ T957] __rtnl_newlink+0x9c5/0x1270
[ 38.464897][ T957] rtnl_newlink+0x65/0x90
[ 38.465522][ T957] rtnetlink_rcv_msg+0x4a8/0x890
[ 38.466215][ T957] netlink_rcv_skb+0x121/0x350
[ 38.466895][ T957] netlink_unicast+0x42e/0x610
[ 38.467583][ T957] netlink_sendmsg+0x65a/0xb90
[ 38.468285][ T957] ____sys_sendmsg+0x5ce/0x7a0
[ 38.469202][ T957] ___sys_sendmsg+0x10f/0x1b0
[ 38.469884][ T957] __sys_sendmsg+0xc6/0x150
[ 38.470587][ T957] do_syscall_64+0x99/0x4f0
[ 38.471245][ T957] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 38.472093][ T957]
[ 38.472093][ T957] other info that might help us debug this:
[ 38.472093][ T957]
[ 38.473438][ T957] Possible unsafe locking scenario:
[ 38.473438][ T957]
[ 38.474898][ T957] CPU0 CPU1
[ 38.476234][ T957] ---- ----
[ 38.480171][ T957] lock(&bond->stats_lock_key);
[ 38.480808][ T957] lock(&bond->stats_lock_key#2);
[ 38.481791][ T957] lock(&bond->stats_lock_key);
[ 38.482754][ T957] lock(&bond->stats_lock_key#2);
[ 38.483416][ T957]
[ 38.483416][ T957] *** DEADLOCK ***
[ 38.483416][ T957]
[ 38.484505][ T957] 3 locks held by ip/957:
[ 38.485048][ T957] #0: ffffffffbccf6230 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x457/0x890
[ 38.486198][ T957] #1: ffff888065fd2cd8 (&bond->stats_lock_key){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding]
[ 38.487625][ T957] #2: ffffffffbc9254c0 (rcu_read_lock){....}, at: bond_get_stats+0x5/0x4d0 [bonding]
[ 38.488897][ T957]
[ 38.488897][ T957] stack backtrace:
[ 38.489646][ T957] CPU: 1 PID: 957 Comm: ip Not tainted 5.5.0+ #394
[ 38.490497][ T957] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 38.492810][ T957] Call Trace:
[ 38.493219][ T957] dump_stack+0x96/0xdb
[ 38.493709][ T957] check_noncircular+0x371/0x450
[ 38.494344][ T957] ? lookup_address+0x60/0x60
[ 38.494923][ T957] ? print_circular_bug.isra.35+0x310/0x310
[ 38.495699][ T957] ? hlock_class+0x130/0x130
[ 38.496334][ T957] ? __lock_acquire+0x2d8d/0x3de0
[ 38.496979][ T957] __lock_acquire+0x2d8d/0x3de0
[ 38.497607][ T957] ? register_lock_class+0x14d0/0x14d0
[ 38.498333][ T957] ? check_chain_key+0x236/0x5d0
[ 38.499003][ T957] lock_acquire+0x164/0x3b0
[ 38.499800][ T957] ? bond_get_stats+0x90/0x4d0 [bonding]
[ 38.500706][ T957] _raw_spin_lock+0x30/0x70
[ 38.501435][ T957] ? bond_get_stats+0x90/0x4d0 [bonding]
[ 38.502311][ T957] bond_get_stats+0x90/0x4d0 [bonding]
[ ... ]
But, there is another problem.
The dynamic lockdep class key is protected by RTNL, but bond_get_stats()
would be called outside of RTNL.
So, it would use an invalid dynamic lockdep class key.
In order to fix this issue, stats_lock uses spin_lock_nested() instead of
a dynamic lockdep key.
The bond_get_stats() calls bond_get_lowest_level_rcu() to get the correct
nest level value, which will be used by spin_lock_nested().
The "dev->lower_level" indicates lower nest level value, but this value
is invalid outside of RTNL.
So, bond_get_lowest_level_rcu() returns valid lower nest level value in
the RCU critical section.
bond_get_lowest_level_rcu() will be work only when LOCKDEP is enabled.
Fixes: 089bca2caed0 ("bonding: use dynamic lockdep key instead of subclass")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After bond_release(), netdev_update_lockdep_key() should be called.
But both ioctl path and attribute path don't call
netdev_update_lockdep_key().
This patch adds missing netdev_update_lockdep_key().
Test commands:
ip link add bond0 type bond
ip link add bond1 type bond
ifenslave bond0 bond1
ifenslave -d bond0 bond1
ifenslave bond1 bond0
Splat looks like:
[ 29.501182][ T1046] WARNING: possible circular locking dependency detected
[ 29.501945][ T1039] hardirqs last disabled at (1962): [<ffffffffac6c807f>] handle_mm_fault+0x13f/0x700
[ 29.503442][ T1046] 5.5.0+ #322 Not tainted
[ 29.503447][ T1046] ------------------------------------------------------
[ 29.504277][ T1039] softirqs last enabled at (1180): [<ffffffffade00678>] __do_softirq+0x678/0x981
[ 29.505443][ T1046] ifenslave/1046 is trying to acquire lock:
[ 29.505886][ T1039] softirqs last disabled at (1169): [<ffffffffac19c18a>] irq_exit+0x17a/0x1a0
[ 29.509997][ T1046] ffff88805d5da280 (&dev->addr_list_lock_key#3){+...}, at: dev_mc_sync_multiple+0x95/0x120
[ 29.511243][ T1046]
[ 29.511243][ T1046] but task is already holding lock:
[ 29.512192][ T1046] ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding]
[ 29.514124][ T1046]
[ 29.514124][ T1046] which lock already depends on the new lock.
[ 29.514124][ T1046]
[ 29.517297][ T1046]
[ 29.517297][ T1046] the existing dependency chain (in reverse order) is:
[ 29.518231][ T1046]
[ 29.518231][ T1046] -> #1 (&dev->addr_list_lock_key#4){+...}:
[ 29.519076][ T1046] _raw_spin_lock+0x30/0x70
[ 29.519588][ T1046] dev_mc_sync_multiple+0x95/0x120
[ 29.520208][ T1046] bond_enslave+0x448d/0x47b0 [bonding]
[ 29.520862][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding]
[ 29.521640][ T1046] __bond_opt_set+0x1ff/0xbb0 [bonding]
[ 29.522438][ T1046] __bond_opt_set_notify+0x2b/0xf0 [bonding]
[ 29.523251][ T1046] bond_opt_tryset_rtnl+0x92/0xf0 [bonding]
[ 29.524082][ T1046] bonding_sysfs_store_option+0x8a/0xf0 [bonding]
[ 29.524959][ T1046] kernfs_fop_write+0x276/0x410
[ 29.525620][ T1046] vfs_write+0x197/0x4a0
[ 29.526218][ T1046] ksys_write+0x141/0x1d0
[ 29.526818][ T1046] do_syscall_64+0x99/0x4f0
[ 29.527430][ T1046] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 29.528265][ T1046]
[ 29.528265][ T1046] -> #0 (&dev->addr_list_lock_key#3){+...}:
[ 29.529272][ T1046] __lock_acquire+0x2d8d/0x3de0
[ 29.529935][ T1046] lock_acquire+0x164/0x3b0
[ 29.530638][ T1046] _raw_spin_lock+0x30/0x70
[ 29.531187][ T1046] dev_mc_sync_multiple+0x95/0x120
[ 29.531790][ T1046] bond_enslave+0x448d/0x47b0 [bonding]
[ 29.532451][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding]
[ 29.533163][ T1046] __bond_opt_set+0x1ff/0xbb0 [bonding]
[ 29.533789][ T1046] __bond_opt_set_notify+0x2b/0xf0 [bonding]
[ 29.534595][ T1046] bond_opt_tryset_rtnl+0x92/0xf0 [bonding]
[ 29.535500][ T1046] bonding_sysfs_store_option+0x8a/0xf0 [bonding]
[ 29.536379][ T1046] kernfs_fop_write+0x276/0x410
[ 29.537057][ T1046] vfs_write+0x197/0x4a0
[ 29.537640][ T1046] ksys_write+0x141/0x1d0
[ 29.538251][ T1046] do_syscall_64+0x99/0x4f0
[ 29.538870][ T1046] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 29.539659][ T1046]
[ 29.539659][ T1046] other info that might help us debug this:
[ 29.539659][ T1046]
[ 29.540953][ T1046] Possible unsafe locking scenario:
[ 29.540953][ T1046]
[ 29.541883][ T1046] CPU0 CPU1
[ 29.542540][ T1046] ---- ----
[ 29.543209][ T1046] lock(&dev->addr_list_lock_key#4);
[ 29.543880][ T1046] lock(&dev->addr_list_lock_key#3);
[ 29.544873][ T1046] lock(&dev->addr_list_lock_key#4);
[ 29.545863][ T1046] lock(&dev->addr_list_lock_key#3);
[ 29.546525][ T1046]
[ 29.546525][ T1046] *** DEADLOCK ***
[ 29.546525][ T1046]
[ 29.547542][ T1046] 5 locks held by ifenslave/1046:
[ 29.548196][ T1046] #0: ffff88806044c478 (sb_writers#5){.+.+}, at: vfs_write+0x3bb/0x4a0
[ 29.549248][ T1046] #1: ffff88805af00890 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1cf/0x410
[ 29.550343][ T1046] #2: ffff88805b8b54b0 (kn->count#157){.+.+}, at: kernfs_fop_write+0x1f2/0x410
[ 29.551575][ T1046] #3: ffffffffaecf4cf0 (rtnl_mutex){+.+.}, at: bond_opt_tryset_rtnl+0x5f/0xf0 [bonding]
[ 29.552819][ T1046] #4: ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding]
[ 29.554175][ T1046]
[ 29.554175][ T1046] stack backtrace:
[ 29.554907][ T1046] CPU: 0 PID: 1046 Comm: ifenslave Not tainted 5.5.0+ #322
[ 29.555854][ T1046] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 29.557064][ T1046] Call Trace:
[ 29.557504][ T1046] dump_stack+0x96/0xdb
[ 29.558054][ T1046] check_noncircular+0x371/0x450
[ 29.558723][ T1046] ? print_circular_bug.isra.35+0x310/0x310
[ 29.559486][ T1046] ? hlock_class+0x130/0x130
[ 29.560100][ T1046] ? __lock_acquire+0x2d8d/0x3de0
[ 29.560761][ T1046] __lock_acquire+0x2d8d/0x3de0
[ 29.561366][ T1046] ? register_lock_class+0x14d0/0x14d0
[ 29.562045][ T1046] ? find_held_lock+0x39/0x1d0
[ 29.562641][ T1046] lock_acquire+0x164/0x3b0
[ 29.563199][ T1046] ? dev_mc_sync_multiple+0x95/0x120
[ 29.563872][ T1046] _raw_spin_lock+0x30/0x70
[ 29.564464][ T1046] ? dev_mc_sync_multiple+0x95/0x120
[ 29.565146][ T1046] dev_mc_sync_multiple+0x95/0x120
[ 29.565793][ T1046] bond_enslave+0x448d/0x47b0 [bonding]
[ 29.566487][ T1046] ? bond_update_slave_arr+0x940/0x940 [bonding]
[ 29.567279][ T1046] ? bstr_printf+0xc20/0xc20
[ 29.567857][ T1046] ? stack_trace_consume_entry+0x160/0x160
[ 29.568614][ T1046] ? deactivate_slab.isra.77+0x2c5/0x800
[ 29.569320][ T1046] ? check_chain_key+0x236/0x5d0
[ 29.569939][ T1046] ? sscanf+0x93/0xc0
[ 29.570442][ T1046] ? vsscanf+0x1e20/0x1e20
[ 29.571003][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding]
[ ... ]
Fixes: ab92d68fc22f ("net: core: add generic lockdep keys")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ending character of the string shoulb be \n, not \b.
Fixes: 17936b43f0fd ("NFC: Standardize logging style")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to ensure that the default VID is untagged otherwise the switch
will be sending tagged frames and the results can be problematic. This
is especially true with b53 switches that use VID 0 as their default
VLAN since VID 0 has a special meaning.
Fixes: fea83353177a ("net: dsa: b53: Fix default VLAN ID")
Fixes: 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
synchronize_net() is a wrapper around synchronize_rcu(), so there's no
point in having synchronize_net and synchronize_rcu back to back,
despite the documentation comment suggesting maybe it's somewhat useful,
"Wait for packets currently being received to be done." This commit
removes the extra call.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It turns out there's an easy way to get packets queued up while still
having an MTU of zero, and that's via persistent keep alive. This commit
makes sure that in whatever condition, we don't wind up dividing by
zero. Note that an MTU of zero for a wireguard interface is something
quasi-valid, so I don't think the correct fix is to limit it via
min_mtu. This can be reproduced easily with:
ip link add wg0 type wireguard
ip link add wg1 type wireguard
ip link set wg0 up mtu 0
ip link set wg1 up
wg set wg0 private-key <(wg genkey)
wg set wg1 listen-port 1 private-key <(wg genkey) peer $(wg show wg0 public-key)
wg set wg0 peer $(wg show wg1 public-key) persistent-keepalive 1 endpoint 127.0.0.1:1
However, while min_mtu=0 seems fine, it makes sense to restrict the
max_mtu. This commit also restricts the maximum MTU to the greatest
number for which rounding up to the padding multiple won't overflow a
signed integer. Packets this large were always rejected anyway
eventually, due to checks deeper in, but it seems more sound not to even
let the administrator configure something that won't work anyway.
We use this opportunity to clean up this function a bit so that it's
clear which paths we're expecting.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a small optimization that prevents more expensive comparisons
from happening when they are no longer necessary, by clearing the
last_under_load variable whenever we wind up in a state where we were
under load but we no longer are.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Matt Dunwoodie <ncon@noconroy.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mii management register in iproc mdio block
does not have a retention register so it is lost on suspend.
Save and restore value of register while resuming from suspend.
Fixes: bb1a619735b4 ("net: phy: Initialize mdio clock at probe function")
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|