| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails
- Make the APPLE AIC chip driver depend on APPLE
- Remove redundant error output on devm_ioremap_resource() failure"
* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Remove redundant error printing
irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
|
|
Pull block fixes from Jens Axboe:
- Fix BLKRRPART and deletion race (Gulam, Christoph)
- NVMe pull request (Christoph):
- nvme-tcp corruption and timeout fixes (Sagi Grimberg, Keith
Busch)
- nvme-fc teardown fix (James Smart)
- nvmet/nvme-loop memory leak fixes (Wu Bo)"
* tag 'block-5.13-2021-05-22' of git://git.kernel.dk/linux-block:
block: fix a race between del_gendisk and BLKRRPART
block: prevent block device lookups at the beginning of del_gendisk
nvme-fc: clear q_live at beginning of association teardown
nvme-tcp: rerun io_work if req_list is not empty
nvme-tcp: fix possible use-after-completion
nvme-loop: fix memory leak in nvme_loop_create_ctrl()
nvmet: fix memory leak in nvmet_alloc_ctrl()
|
|
Pull xen fixes from Juergen Gross:
- a fix for a boot regression when running as PV guest on hardware
without NX support
- a small series fixing a bug in the Xen pciback driver when
configuring a PCI card with multiple virtual functions
* tag 'for-linus-5.13b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: reconfigure also from backend watch handler
xen-pciback: redo VF placement in the virtual topology
x86/Xen: swap NX determination and GDT setup on BSP
|
|
Pull gpio fixes from Bartosz Golaszewski:
- add missing MODULE_DEVICE_TABLE in gpio-cadence
- fix a kernel doc validator error in gpio-xilinx
- don't set parent IRQ affinity in gpio-tegra186
* tag 'gpio-fixes-for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tegra186: Don't set parent IRQ affinity
gpio: xilinx: Correct kernel doc for xgpio_probe()
gpio: cadence: Add missing MODULE_DEVICE_TABLE
|
|
Pull MMC host fixes from Ulf Hansson:
- Fix SD-card detection on Intel NUC10i3FNK4 (GL9755)
- Replace WARN_ONCE with dev_warn_once for scatterlist offsets
- Extend check of scatterlist size alignment with SD_IO_RW_EXTENDED
* tag 'mmc-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: increase 1.8V regulator wait
mmc: meson-gx: also check SD_IO_RW_EXTENDED for scatterlist size alignment
mmc: meson-gx: make replace WARN_ONCE with dev_warn_once about scatterlist offset alignment
|
|
When multiple PCI devices get assigned to a guest right at boot, libxl
incrementally populates the backend tree. The writes for the first of
the devices trigger the backend watch. In turn xen_pcibk_setup_backend()
will set the XenBus state to Initialised, at which point no further
reconfigures would happen unless a device got hotplugged. Arrange for
reconfigure to also get triggered from the backend watch handler.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/2337cbd6-94b9-4187-9862-c03ea12e0c61@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The commit referenced below was incomplete: It merely affected what
would get written to the vdev-<N> xenstore node. The guest would still
find the function at the original function number as long as
__xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt
__xen_pcibk_get_pcifront_dev().
Undo overriding the function to zero and instead make sure that VFs at
function zero remain alone in their slot. This has the added benefit of
improving overall capacity, considering that there's only a total of 32
slots available right now (PCI segment and bus can both only ever be
zero at present).
Fixes: 8a5248fe10b1 ("xen PV passthru: assign SR-IOV virtual functions to separate virtual slots")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/8def783b-404c-3452-196d-3f3fd4d72c9e@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Pull drm fixes from Dave Airlie:
"Usual collection, mostly amdgpu and some i915 regression fixes. I
nearly managed to hose my build/sign machine this week, but I
recovered it just in time, and I even got clang12 built.
dma-buf:
- WARN fix
amdgpu:
- Fix downscaling ratio on DCN3.x
- Fix for non-4K pages
- PCO/RV compute hang fix
- Dongle fix
- Aldebaran codec query support
- Refcount leak fix
- Use after free fix
- Navi12 golden settings updates
- GPU reset fixes
radeon:
- Fix for imported BO handling
i915:
- Pin the L-shape quirked object as unshrinkable to fix crashes
- Disable HiZ Raw Stall Optimization on broken gen7 to fix glitches,
gfx corruption
- GVT: Move mdev attribute groups into kvmgt module to fix kconfig
deps issue
exynos:
- Correct kerneldoc of fimd_shadow_protect_win function
- Drop redundant error messages"
* tag 'drm-fixes-2021-05-21-1' of git://anongit.freedesktop.org/drm/drm:
dma-buf: fix unintended pin/unpin warnings
drm/amdgpu: stop touching sched.ready in the backend
drm/amd/amdgpu: fix a potential deadlock in gpu reset
drm/amdgpu: update sdma golden setting for Navi12
drm/amdgpu: update gc golden setting for Navi12
drm/amdgpu: Fix a use-after-free
drm/amdgpu: add video_codecs query support for aldebaran
drm/amd/amdgpu: fix refcount leak
drm/amd/display: Disconnect non-DP with no EDID
drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hang
drm/amdgpu: Fix GPU TLB update error when PAGE_SIZE > AMDGPU_PAGE_SIZE
drm/radeon: use the dummy page for GART if needed
drm/amd/display: Use the correct max downscaling value for DCN3.x family
drm/i915/gt: Disable HiZ Raw Stall Optimization on broken gen7
drm/i915/gem: Pin the L-shape quirked object as unshrinkable
drm/exynos/decon5433: Remove redundant error printing in exynos5433_decon_probe()
drm/exynos: Remove redundant error printing in exynos_dsi_probe()
drm/exynos: correct exynos_drm_fimd kerneldoc
drm/i915/gvt: Move mdev attribute groups into kvmgt module
|
|
amd-drm-fixes-5.13-2021-05-19:
amdgpu:
- Fix downscaling ratio on DCN3.x
- Fix for non-4K pages
- PCO/RV compute hang fix
- Dongle fix
- Aldebaran codec query support
- Refcount leak fix
- Use after free fix
- Navi12 golden settings updates
- GPU reset fixes
radeon:
- Fix for imported BO handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520022500.4023-1-alexander.deucher@amd.com
|
|
drm/i915 fixes for v5.13-rc3:
- Pin the L-shape quirked object as unshrinkable to fix crashes
- Disable HiZ Raw Stall Optimization on broken gen7 to fix glitches, gfx corruption
- GVT: Move mdev attribute groups into kvmgt module to fix kconfig deps issue
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a6opehx6.fsf@intel.com
|
|
Just a single fix for a dma-buf related WARN
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520140808.ds6bk6i3oarmiea6@gilmour
|
|
Pull ARM SoC fixes from Arnd Bergmann:
"Only a small number of fixes so far, including some that I had applied
during the merge window, so this is based on the original merge of the
other branches.
- The largest change is a fix for a reference counting bug in the AMD
TEE driver.
- Neil Armstrong now co-maintains Amlogic SoC support
- Two build warning fixes for renesas device tree files
- A sign expansion bug for optee
- A DT binding fix for a mismerge"
* tag 'arm-soc-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: npcm: wpcm450: select interrupt controller driver
MAINTAINERS: ARM/Amlogic SoCs: add Neil as primary maintainer
tee: amdtee: unload TA only when its refcount becomes 0
dt-bindings: nvmem: mediatek: remove duplicate mt8192 line
firmware: arm_scmi: Remove duplicate declaration of struct scmi_protocol_handle
firmware: arm_scpi: Prevent the ternary sign expansion bug
arm64: dts: renesas: Add port@0 node for all CSI-2 nodes to dtsi
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Fix CSI40 ports
|
|
Pull SCSI fixes from James Bottomley:
"Eight small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm80xx: Fix drives missing during rmmod/insmod loop
scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()
scsi: qedf: Add pointer checks in qedf_update_link_speed()
scsi: ufs: core: Increase the usable queue depth
scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic
scsi: ufs: ufs-mediatek: Fix power down spec violation
|
|
Pull device mapper fixes from Mike Snitzer:
- Fix a couple DM snapshot target crashes exposed by user-error.
- Fix DM integrity target to not use discard optimization, introduced
during 5.13 merge, when recalulating.
- Fix some sparse warnings in DM integrity target.
* tag 'for-5.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix sparse warnings
dm integrity: revert to not using discard filler when recalulating
dm snapshot: fix crash with transient storage and zero chunk size
dm snapshot: fix a crash when an origin has no snapshots
|
|
Pull rdma fixes from Jason Gunthorpe:
"A mixture of small bug fixes, most for longer standing problems:
- NULL pointer crash in siw
- Various error unwind bugs in siw, rxe, cm
- User triggerable errors in uverbs
- Minor bugs in mlx5 and rxe drivers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/uverbs: Fix a NULL vs IS_ERR() bug
RDMA/mlx5: Fix query DCT via DEVX
RDMA/core: Don't access cm_id after its destruction
RDMA/rxe: Return CQE error if invalid lkey was supplied
RDMA/mlx5: Recover from fatal event in dual port mode
RDMA/mlx5: Verify that DM operation is reasonable
RDMA/rxe: Clear all QP fields if creation failed
RDMA/core: Prevent divide-by-zero error triggered by the user
RDMA/siw: Release xarray entry
RDMA/siw: Properly check send and receive CQ pointers
|
|
Pull x86 platform driver fixes from Hans de Goede:
"Assorted pdx86 bug-fixes and model-specific quirks for 5.13"
* tag 'platform-drivers-x86-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Chuwi Hi10 Pro (CWI529) tablet
platform/x86: touchscreen_dmi: Add info for the Mediacom Winpad 7.0 W700 tablet
platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI
platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios
platform/x86: hp-wireless: add AMD's hardware id to the supported list
platform/x86: intel_int0002_vgpio: Only call enable_irq_wake() when using s2idle
platform/x86: gigabyte-wmi: add support for B550 Aorus Elite
platform/x86: gigabyte-wmi: add support for X570 UD
platform/x86: gigabyte-wmi: streamline dmi matching
platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue
platform/surface: dtx: Fix poll function
platform/surface: aggregator: Add platform-drivers-x86 list to MAINTAINERS entry
platform/surface: aggregator: avoid clang -Wconstant-conversion warning
platform/surface: aggregator: Do not mark interrupt as shared
platform/x86: hp_accel: Avoid invoking _INI to speed up resume
platform/x86: ideapad-laptop: fix method name typo
platform/x86: ideapad-laptop: fix a NULL pointer dereference
|
|
Pull char/misc driver fixes from Greg KH:
"Here is a big set of char/misc/other driver fixes for 5.13-rc3.
The majority here is the fallout of the umn.edu re-review of all prior
submissions. That resulted in a bunch of reverts along with the
"correct" changes made, such that there is no regression of any of the
potential fixes that were made by those individuals. I would like to
thank the over 80 different developers who helped with the review and
fixes for this mess.
Other than that, there's a few habanna driver fixes for reported
issues, and some dyndbg fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (82 commits)
misc: eeprom: at24: check suspend status before disable regulator
uio_hv_generic: Fix another memory leak in error handling paths
uio_hv_generic: Fix a memory leak in error handling paths
uio/uio_pci_generic: fix return value changed in refactoring
Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""
dyndbg: drop uninformative vpr_info
dyndbg: avoid calling dyndbg_emit_prefix when it has no work
binder: Return EFAULT if we fail BINDER_ENABLE_ONEWAY_SPAM_DETECTION
cdrom: gdrom: initialize global variable at init time
brcmfmac: properly check for bus register errors
Revert "brcmfmac: add a check for the status of usb_register"
video: imsttfb: check for ioremap() failures
Revert "video: imsttfb: fix potential NULL pointer dereferences"
net: liquidio: Add missing null pointer checks
Revert "net: liquidio: fix a NULL pointer dereference"
media: gspca: properly check for errors in po1030_probe()
Revert "media: gspca: Check the return value of write_bridge for timeout"
media: gspca: mt9m111: Check write_bridge for timeout
Revert "media: gspca: mt9m111: Check write_bridge for timeout"
media: dvb: Add check on sp8870_readreg return
...
|
|
Add touchscreen info for the Chuwi Hi10 Pro (CWI529) tablet. This includes
info for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210520093228.7439-1-hdegoede@redhat.com
|
|
DMA-buf internal users call the pin/unpin functions without having a
dynamic attachment. Avoid the warning and backtrace in the logs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Bugs: https://gitlab.freedesktop.org/drm/intel/-/issues/3481
Fixes: c545781e1c55 ("dma-buf: doc polish for pin/unpin")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: stable@kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210517115705.2141-1-christian.koenig@amd.com
|
|
This unfortunately comes up in regular intervals and breaks
GPU reset for the engine in question.
The sched.ready flag controls if an engine can't get working
during hw_init, but should never be set to false during hw_fini.
v2: squash in unused variable fix (Alex)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When amdgpu_ib_ring_tests failed, the reset logic called
amdgpu_device_ip_suspend twice, then deadlock occurred.
Deadlock log:
[ 805.655192] amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110).
[ 806.290952] [drm] free PSP TMR buffer
[ 806.319406] ============================================
[ 806.320315] WARNING: possible recursive locking detected
[ 806.321225] 5.11.0-custom #1 Tainted: G W OEL
[ 806.322135] --------------------------------------------
[ 806.323043] cat/2593 is trying to acquire lock:
[ 806.323825] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.325668]
but task is already holding lock:
[ 806.326664] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.328430]
other info that might help us debug this:
[ 806.329539] Possible unsafe locking scenario:
[ 806.330549] CPU0
[ 806.330983] ----
[ 806.331416] lock(&adev->dm.dc_lock);
[ 806.332086] lock(&adev->dm.dc_lock);
[ 806.332738]
*** DEADLOCK ***
[ 806.333747] May be due to missing lock nesting notation
[ 806.334899] 3 locks held by cat/2593:
[ 806.335537] #0: ffff888100d3f1b8 (&attr->mutex){+.+.}-{3:3}, at: simple_attr_read+0x4e/0x110
[ 806.337009] #1: ffff888136b1fd78 (&adev->reset_sem){++++}-{3:3}, at: amdgpu_device_lock_adev+0x42/0x94 [amdgpu]
[ 806.339018] #2: ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.340869]
stack backtrace:
[ 806.341621] CPU: 6 PID: 2593 Comm: cat Tainted: G W OEL 5.11.0-custom #1
[ 806.342921] Hardware name: AMD Celadon-CZN/Celadon-CZN, BIOS WLD0C23N_Weekly_20_12_2 12/23/2020
[ 806.344413] Call Trace:
[ 806.344849] dump_stack+0x93/0xbd
[ 806.345435] __lock_acquire.cold+0x18a/0x2cf
[ 806.346179] lock_acquire+0xca/0x390
[ 806.346807] ? dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.347813] __mutex_lock+0x9b/0x930
[ 806.348454] ? dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.349434] ? amdgpu_device_indirect_rreg+0x58/0x70 [amdgpu]
[ 806.350581] ? _raw_spin_unlock_irqrestore+0x47/0x50
[ 806.351437] ? dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.352437] ? rcu_read_lock_sched_held+0x4f/0x80
[ 806.353252] ? rcu_read_lock_sched_held+0x4f/0x80
[ 806.354064] mutex_lock_nested+0x1b/0x20
[ 806.354747] ? mutex_lock_nested+0x1b/0x20
[ 806.355457] dm_suspend+0xb8/0x1d0 [amdgpu]
[ 806.356427] ? soc15_common_set_clockgating_state+0x17d/0x19 [amdgpu]
[ 806.357736] amdgpu_device_ip_suspend_phase1+0x78/0xd0 [amdgpu]
[ 806.360394] amdgpu_device_ip_suspend+0x21/0x70 [amdgpu]
[ 806.362926] amdgpu_device_pre_asic_reset+0xb3/0x270 [amdgpu]
[ 806.365560] amdgpu_device_gpu_recover.cold+0x679/0x8eb [amdgpu]
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian KÃnig <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Current golden setting is out of date.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Current golden setting is out of date.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
looks like we forget to set ttm->sg to NULL.
Hit panic below
[ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 1235.989074] Call Trace:
[ 1235.991751] sg_free_table+0x17/0x20
[ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu]
[ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu]
[ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm]
[ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm]
[ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm]
[ 1236.023547] ttm_bo_put+0x82/0xd0 [ttm]
[ 1236.027766] amdgpu_bo_unref+0x26/0x50 [amdgpu]
[ 1236.032809] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu]
[ 1236.040400] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu]
[ 1236.046912] kfd_ioctl+0x463/0x690 [amdgpu]
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add video_codecs query support for aldebaran.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
the gem object rfb->base.obj[0] is get according to num_planes
in amdgpufb_create, but is not put according to num_planes
[How]
put rfb->base.obj[0] in amdgpu_fbdev_destroy according to num_planes
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Active DP dongles return no EDID when dongle
is connected, but VGA display is taken out.
Current driver behavior does not remove the
active display when this happens, and this is
a gap between dongle DTP and dongle behavior.
[How]
For active DP dongles and non-DP scenario,
disconnect sink on detection when no EDID
is read due to timeout.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is problem with 3DCGCG firmware and it will cause compute test
hang on picasso/raven1. It needs to disable 3DCGCG in driver to avoid
compute hang.
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
When PAGE_SIZE is larger than AMDGPU_PAGE_SIZE, the number of GPU TLB
entries which need to update in amdgpu_map_buffer() should be multiplied
by AMDGPU_GPU_PAGES_IN_CPU_PAGE (PAGE_SIZE / AMDGPU_PAGE_SIZE).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Yi Li <liyi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Imported BOs don't have a pagelist any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 0575ff3d33cd ("drm/radeon: stop using pages with drm_prime_sg_to_page_addr_arrays v2")
CC: stable@vger.kernel.org # 5.12
|
|
[why]
As per spec, DCN3.x can do 6:1 downscaling and DCN2.x can do 4:1. The
max downscaling limit value for DCN2.x is 250, which means it's
calculated as 1000 / 4 = 250. For DCN3.x this then gives 1000 / 6 = 167.
[how]
Set maximum downscaling limit to 167 for DCN3.x
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The uapi_get_object() function returns error pointers, it never returns
NULL.
Fixes: 149d3845f4a5 ("RDMA/uverbs: Add a method to introspect handles in a context")
Link: https://lore.kernel.org/r/YJ6Got+U7lz+3n9a@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When executing DEVX command to query QP object, we need to take the QP
type from the mlx5_ib_qp struct which hold the driver specific QP types as
well, such as DC.
Fixes: 34613eb1d2ad ("IB/mlx5: Enable modify and query verbs objects via DEVX")
Link: https://lore.kernel.org/r/6eee15d63f09bb70787488e0cf96216e2957f5aa.1621413654.git.leonro@nvidia.com
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This reverts commit b12d691ea5e01db42ccf3b4207e57cb3ce7cfe91.
It turns out this is not ready for primetime yet. The intentions are
good, but using remap_pfn_range() requires that there is nothing already
mapped in the area, and the i915 code seems to very much intentionally
remap the same area multiple times.
That will then just trigger the
BUG_ON(!pte_none(*pte));
in mm/memory.c: remap_pte_range().
There are also reports of mapping type inconsistencies, resulting in
warnings and in screen corruption.
Link: https://lore.kernel.org/lkml/20210519024322.GA29704@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/YKUjvoaKKggAmpIR@sf/
Link: https://lore.kernel.org/lkml/b6b61cf0-5874-f4c0-1fcc-4b3848451c31@redhat.com/
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Kalle Valo <kvalo@codeaurora.org>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add touchscreen info for the Mediacom Winpad 7.0 W700 tablet.
Tested on 5.11 hirsute.
Note: it's hw clone to Wintron surftab 7.
Signed-off-by: Teava Radu <rateava@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-6-hdegoede@redhat.com
|
|
The intel_punit_ipc driver might be compiled as a module.
When udev handles the event of the devices appearing
the intel_punit_ipc module is missing.
Append MODULE_DEVICE_TABLE for ACPI case to fix the loading issue.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210519101521.79338-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems
where the Dell WMI interface is supported. While exit_dell_smbios_wmi()
unregisters it unconditionally, this leads to the following oops:
[ 175.722921] ------------[ cut here ]------------
[ 175.722925] Unexpected driver unregister!
[ 175.722939] WARNING: CPU: 1 PID: 3630 at drivers/base/driver.c:194 driver_unregister+0x38/0x40
...
[ 175.723089] Call Trace:
[ 175.723094] cleanup_module+0x5/0xedd [dell_smbios]
...
[ 175.723148] ---[ end trace 064c34e1ad49509d ]---
Make the unregister happen on the same condition the register happens
to fix this.
Cc: Mario Limonciello <mario.limonciello@outlook.com>
Fixes: 1a258e670434 ("platform/x86: dell-smbios-wmi: Add new WMI dispatcher driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@outlook.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210518125027.21824-1-hdegoede@redhat.com
|
|
Newer AMD based laptops uses AMDI0051 as the hardware id to support the
airplane mode button. Adding this to the supported list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20210514180047.1697543-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Commit 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement
irq_set_wake on Bay Trail") stopped passing irq_set_wake requests on to
the parents IRQ because this was breaking suspend (causing immediate
wakeups) on an Asus E202SA.
This workaround for the Asus E202SA is causing wakeup by USB keyboard to
not work on other devices with Airmont CPU cores such as the Medion Akoya
E1239T. In hindsight the problem with the Asus E202SA has nothing to do
with Silvermont vs Airmont CPU cores, so the differentiation between the
2 types of CPU cores introduced by the previous fix is wrong.
The real issue at hand is s2idle vs S3 suspend where the suspend is
mostly handled by firmware. The parent IRQ for the INT0002 device is shared
with the ACPI SCI and the real problem is that the INT0002 code should not
be messing with the wakeup settings of that IRQ when suspend/resume is
being handled by the firmware.
Note that on systems which support both s2idle and S3 suspend, which
suspend method to use can be changed at runtime.
This patch fixes both the Asus E202SA spurious wakeups issue as well as
the wakeup by USB keyboard not working on the Medion Akoya E1239T issue.
These are both fixed by replacing the old workaround with delaying the
enable_irq_wake(parent_irq) call till system-suspend time and protecting
it with a !pm_suspend_via_firmware() check so that we still do not call
it on devices using firmware-based (S3) suspend such as the Asus E202SA.
Note rather then adding #ifdef CONFIG_PM_SLEEP, this commit simply adds
a "depends on PM_SLEEP" to the Kconfig since this drivers whole purpose
is to deal with wakeup events, so using it without CONFIG_PM_SLEEP makes
no sense.
Cc: Maxim Mikityanskiy <maxtram95@gmail.com>
Fixes: 871f1f2bcb01 ("platform/x86: intel_int0002_vgpio: Only implement irq_set_wake on Bay Trail")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20210512125523.55215-2-hdegoede@redhat.com
|
|
Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-837210304
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210510221545.412522-3-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/4
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210510221545.412522-2-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Streamline dmi matching.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210510221545.412522-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The virtio framework uses wmb() when updating avail->idx. It
guarantees the write order, but not necessarily loading order
for the code accessing the memory. This commit adds a load barrier
after reading the avail->idx to make sure all the data in the
descriptor is visible. It also adds a barrier when returning the
packet to virtio framework to make sure read/writes are visible to
the virtio code.
Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/1620433812-17911-1-git-send-email-limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The poll function should not return -ERESTARTSYS.
Furthermore, locking in this function is completely unnecessary. The
ddev->lock protects access to the main device and controller (ddev->dev
and ddev->ctrl), ensuring that both are and remain valid while being
accessed by clients. Both are, however, never accessed in the poll
function. The shutdown test (via atomic bit flags) be safely done
without locking, so drop locking here entirely.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1d609992832e ("platform/surface: Add DTX driver)
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210513134437.2431022-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Having both IRQF_NO_AUTOEN and IRQF_SHARED set causes
request_threaded_irq() to return with -EINVAL (see comment in flag
validation in that function). As the interrupt is currently not shared
between multiple devices, drop the IRQF_SHARED flag.
Fixes: 507cf5a2f1e2 ("platform/surface: aggregator: move to use request_irq by IRQF_NO_AUTOEN flag")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210505133635.1499703-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
gvt-fixes-2021-05-19
- Fix workaround in -rc1 for GVT config (Zhenyu)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519074912.GG4589@zhen-hp.sh.intel.com
|
|
When resetting CACHE_MODE registers, don't enable HiZ Raw Stall
Optimization on Ivybridge GT1 and Baytrail, as it causes severe glitches
when rendering any kind of 3D accelerated content.
This optimization is disabled on these platforms by default according to
official documentation from 01.org.
Fixes: ef99a60ffd9b ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals")
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3081
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3404
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3071
Reviewed-by: Manuel Bentele <development@manuel-bentele.de>
Signed-off-by: Simon Rettberg <simon.rettberg@rz.uni-freiburg.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo removed invalid Fixes line]
Link: https://patchwork.freedesktop.org/patch/msgid/20210426161124.2b7fd708@dellnichtsogutkiste
(cherry picked from commit 929b734ad34b717d6a1b8de97f53bb5616040147)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When instantiating a tiled object on an L-shaped memory machine, we mark
the object as unshrinkable to prevent the shrinker from trying to swap
out the pages. We have to do this as we do not know the swizzling on the
individual pages, and so the data will be scrambled across swap out/in.
Not only do we need to move the object off the shrinker list, we need to
mark the object with shrink_pin so that the counter is consistent across
calls to madvise.
v2: in the madvise ioctl we need to check if the object is currently
shrinkable/purgeable, not if the object type supports shrinking
Fixes: 0175969e489a ("drm/i915/gem: Use shrinkable status for unknown swizzle quirks")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3293
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3450
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20210517084640.18862-1-matthew.auld@intel.com
(cherry picked from commit 8777d17b68dcfbfbd4d524f444adefae56f41225)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The __nvmf_check_ready() routine used to bounce all filesystem io if the
controller state isn't LIVE. However, a later patch changed the logic so
that it rejection ends up being based on the Q live check. The FC
transport has a slightly different sequence from rdma and tcp for
shutting down queues/marking them non-live. FC marks its queue non-live
after aborting all ios and waiting for their termination, leaving a
rather large window for filesystem io to continue to hit the transport.
Unfortunately this resulted in filesystem I/O or applications seeing I/O
errors.
Change the FC transport to mark the queues non-live at the first sign of
teardown for the association (when I/O is initially terminated).
Fixes: 73a5379937ec ("nvme-fabrics: allow to queue requests for live queues")
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A possible race condition exists where the request to send data is
enqueued from nvme_tcp_handle_r2t()'s will not be observed by
nvme_tcp_send_all() if it happens to be running. The driver relies on
io_work to send the enqueued request when it is runs again, but the
concurrently running nvme_tcp_send_all() may not have released the
send_mutex at that time. If no future commands are enqueued to re-kick
the io_work, the request will timeout in the SEND_H2C state, resulting
in a timeout error like:
nvme nvme0: queue 1: timeout request 0x3 type 6
Ensure the io_work continues to run as long as the req_list is not empty.
Fixes: db5ad6b7f8cdd ("nvme-tcp: try to send request in queue_rq context")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
Linus Torvalds
Jan Beulich
Dave Airlie
Hans de Goede
Christian König
Lang Yu
Guchun Chen
xinhui pan
James Zhu
Jingwen Chen
Chris Park
Changfeng
Yi Li
Nikola Cornij
Dan Carpenter
Maor Gottlieb
Teava Radu
Andy Shevchenko
Shyam Sundar S K
Thomas Weißschuh
Liming Sun
Maximilian Luz
Jani Nikula
Simon Rettberg
Chris Wilson
James Smart
Keith Busch