aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-02-02bna: use device model DMA APIIvan Vecera2-53/+57
Use DMA API as PCI equivalents will be deprecated. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x, cnic: Consolidate iSCSI/FCoE shared mem logic in bnx2xVladislav Zolotarov6-149/+146
Move all shared mem code to bnx2x to avoid code duplication. bnx2x now performs: - Read the FCoE and iSCSI max connection information. - Read the iSCSI and FCoE MACs from NPAR configuration in shmem. - Block the CNIC for the current function if there is neither FCoE nor iSCSI valid configuration by returning NULL from bnx2x_cnic_probe(). Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Update bnx2x version to 1.62.11-0Yaniv Rosner1-2/+2
Update bnx2x version to 1.62.11-0 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Remove support for emulation/FPGAYaniv Rosner1-87/+1
Remove unneeded support for emulation/FPGA from the code Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add CMS functionality for 848x3Yaniv Rosner2-1/+22
Add CMS(Common Mode Sense) functionality for 848x3 as this reduces power consumption and allows a better 10G link stability Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add support for new PHY BCM84833Yaniv Rosner2-27/+84
Add support for new PHY BCM84833. This PHY is very similar to the BCM84823, only it has different register offset compared to the BCM84823, which needs to be handled correctly. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Enhance SFP+ module controlYaniv Rosner3-45/+289
Add flexible support to control various SFP+ module features either throughout MDIO registers or GPIO pins according to NVRAM configuration Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Add and change some net_dev messagesYaniv Rosner1-13/+28
Add and modify some net dev prints to improve error control Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Fix compilation warning messagesYaniv Rosner2-12/+11
Fix annoying compilation warning, mainly related to static declarations Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Set comments according to preferred Linux styleYaniv Rosner1-287/+364
This patch contains cosmetic changes only of restyling comments according to Linux coding standard, and add comment for get_emac_base function. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Rename CL45 macroYaniv Rosner1-67/+66
This patch contains cosmetic changes only of renaming CL45_WR_OVER_CL22 macro to CL22_WR_OVER_CL45 as it should be. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31bnx2x: Fix line indentationYaniv Rosner2-648/+607
This patch contains cosmetic changes only to fix code alignment, and update copyright comment year Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller4-57/+32
2011-01-30bnx2x: Update bnx2x version to 1.62.00-5Yaniv Rosner1-2/+2
Update bnx2x version to 1.62.00-5 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix potential link loss in multi-function modeYaniv Rosner1-7/+11
All functions on a port should be set to take the MDC/MDIO lock to avoid contention on the bus Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix port swap for BCM8073Yaniv Rosner1-3/+6
Fix link on BCM57712 + BCM8073 when port swap is enabled. Common PHY reset was done on the wrong port. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Fix LED blink rate on BCM84823Yaniv Rosner1-0/+12
Fix blink rate of activity LED of the BCM84823 on 10G link Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30bnx2x: Remove setting XAUI low-power for BCM8073Yaniv Rosner1-44/+0
A rare link issue with the BCM8073 PHY may occur due to setting XAUI low power mode, while the PHY microcode already does that. The fix is not to set set XAUI low power mode for this PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30slcan: fix referenced website in Kconfig help textOliver Hartkopp1-1/+1
Fix the referenced project website to www.mictronics.de in the Kconfig help text for the slcan driver. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6David S. Miller83-807/+2717
2011-01-27sungem: Use net_device's internal statsDenis Kirjanov2-30/+29
Use net_device_stats instance from the struct net_device. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27drivers/net: remove some rcu sparse warningsEric Dumazet8-25/+40
Add missing __rcu annotations and helpers. minor : Fix some rcu_dereference() calls in macvtap Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller5-24/+106
2011-01-27dl2k: nulify fraginfo after unmapStanislaw Gruszka1-2/+2
Patch fixes: "DMA-API: device driver tries to free an invalid DMA memory address" warning reported here: https://bugzilla.redhat.com/show_bug.cgi?id=639824 Reported-by: Frantisek Hanzlik <franta@hanzlici.cz> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27xen: netfront: handle incoming GSO SKBs which are not CHECKSUM_PARTIALIan Campbell1-8/+88
The Linux network stack expects all GSO SKBs to have ip_summed == CHECKSUM_PARTIAL (which implies that the frame contains a partial checksum) and the Xen network ring protocol similarly expects an SKB which has GSO set to also have NETRX_csum_blank (which also implies a partial checksum). However there have been cases of buggy guests which mark a frame as GSO but do not set csum_blank. If we detect that we a receiving such a frame (which manifests as ip_summed != PARTIAL && skb_is_gso) then force the SKB to partial and recalculate the checksum, since we cannot rely on the peer having done so if they have not set csum_blank. Add an ethtool stat to track occurances of this event. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: David Miller <davem@davemloft.net> Cc: xen-devel@lists.xensource.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27ath9k: fix misplaced debug codeFelix Fietkau2-8/+3
The commit 'ath9k: Add more information to debugfs xmit file.' added more debug counters to ath9k and also added some lines of code to ath9k_hw. Since ath9k_hw is also used by ath9k_htc, its code must not depend on ath9k data structures. In this case it was not fatal, but it's still wrong, so the code needs to be moved back to ath9k. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-27carl9170: utilize fw seq counter for mgmt/non-QoS data framesChristian Lamparter4-0/+23
"mac80211 will properly assign sequence numbers to QoS-data frames but cannot do so correctly for non-QoS-data and management frames because beacons need them from that counter as well and mac80211 cannot guarantee proper sequencing." Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-27carl9170: enable wake-on-lan feature testingChristian Lamparter1-0/+3
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-27carl9170: update fw/hw headersChristian Lamparter5-11/+71
This patch syncs up the header files with the project's main firmware carl9170fw.git. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-26bnx2: Eliminate AER error messages on systems not supporting itMichael Chan2-8/+10
On PPC for example, AER is not supported and we see unnecessary AER error message without this patch: bnx2 0003:01:00.1: pci_cleanup_aer_uncorrect_error_status failed 0xfffffffb Reported-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-26cnic: Fix big endian bugMichael Chan1-6/+6
The chip's page tables did not set up properly on big endian machines, causing EEH errors on PPC machines. Reported-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-26Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6David S. Miller13-94/+167
2011-01-26ath9k: clean up enums and unused macrosMohammed Shafi Shajakhan2-6/+3
Remove unused macros and cleanup buffer_type enumeration Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-26tg3: Use new VLAN codeMatt Carlson2-88/+10
This patch pivots the tg3 driver to the new VLAN infrastructure. All references to vlgrp have been removed. The driver still attempts to disable VLAN tag stripping if CONFIG_VLAN_8021Q or CONFIG_VLAN_8021Q_MODULE is not defined. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-26Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6John W. Linville24-313/+998
2011-01-26Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6David S. Miller9-67/+49
2011-01-25smc91x: add devicetree supportThomas Chou1-0/+13
Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Update copyrights and update version to 3.117Matt Carlson2-4/+4
This patch updates copyrights and updates the tg3 version to 3.117. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Fix eee preprocessor namingMatt Carlson2-2/+2
This patch fixes a preprocessor naming bug for one of the EEE registers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Fix EEE interoperability issueMatt Carlson2-7/+39
This patch fixes a problem where EEE will fail to work in certain environments. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Disable EEE during loopback testsMatt Carlson1-5/+15
EEE interferes with the hardware's ability to loop a packet back to the host. This patch disables the feature for the duration of the test. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Disable MAC loopback test for CPMU devicesMatt Carlson1-2/+4
On CPMU devices, the MAC loopback test does not test any important paths the phy loopback test doesn't also test. The phy loopback test is the more comprehensive test. This patch disables the MAC loopback test for these devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Fix loopback testsMatt Carlson1-3/+12
The half-duplex bit in the MAC MODE register will be set during the loopback test if the external link is in half-duplex mode. This will cause the loopback test to fail on newer devices. This patch turns the half-duplex bit off for the test. Also, newer devices fail the internal phy loopback test because the phy link takes a little while to come up. This patch adds code to wait for the link before proceeding with the test. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Restrict phy ioctl accessMatt Carlson1-2/+6
If management firmware is present and the device is down, the firmware will assume control of the phy. If a phy access were allowed from the host, it will collide with firmware phy accesses, resulting in unpredictable behavior. This patch fixes the problem by disallowing phy accesses during the problematic condition. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Disable multivec mode for 1 MSIX vectorMatt Carlson1-2/+4
For single vector MSI-X allocations, we do not want to enable multivector modes. This patch makes the necessary corrections. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Use new VLAN codeMatt Carlson2-88/+10
This patch pivots the tg3 driver to the new VLAN infrastructure. All references to vlgrp have been removed. The driver still attempts to disable VLAN tag stripping if CONFIG_VLAN_8021Q or CONFIG_VLAN_8021Q_MODULE is not defined. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Fix 5719 A0 tx completion bugMatt Carlson2-4/+9
The 5719 A0 has a bug that manifests itself as if the chipset were reordering memory writes. The best known way to solve this problem is to turn off LSO and jumbo frames. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25tg3: Revise 5719 internal FIFO overflow solutionMatt Carlson2-38/+12
Commit cf79003d598b1f82a4caa0564107283b4f560e14, entitled "tg3: Fix 5719 internal FIFO overflow problem", proposed a way to solve an internal FIFO overflow problem. We have since discovered a slightly better way to solve the problem. This patch changes the code so that the problem is contained closer to the problem source. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-25ath5k: ath5k_setup_channels cleanup and whitespaceBruno Randolf1-8/+3
Remove useless test_bit - it's not going to happen because of the way this function is called only when that bit is set. And fix some whitespace. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-25ath9k_hw: read and backup AR_WA register value even before chip reset on.Senthil Balasubramanian1-8/+9
We need to read and backup AR_WA register value permanently and reading this after the chip is awakened results in this register being zeroed out. This seems to fix the ASPM with L1 enabled issue that we have observed. The laptop becomes very slow and hangs mostly with ASPM L1 enabled without this fix. Cc: Stable Kernel <stable@kernel.org> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.