aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-04-14fm10k: Set PF queues to unlimited bandwidth during virtualizationJeff Kirsher1-1/+2
When returning virtualization queues from the VF back to the PF, do not retain the VF rate limiter. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Todd Russell <todd.a.russell@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: expose tx_timeout_count as an ethtool statJeff Kirsher1-0/+2
Named it tx_hang_count to differentiate it from tx_hwtstamp_timeout. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: only increment tx_timeout_count in Tx hang pathJeff Kirsher1-1/+0
We were incrementing the tx_timeout_count for both the Tx hang and then for all reset flows. Instead, we should only increment tx_timeout_count in the Tx hang path, so that our Tx hang counter does not increment when it was not caused by a Tx hang. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: remove extraneous "Reset interface" messageJeff Kirsher1-1/+0
Since we already print this message when a reset is requested via the RESET_REQUESTED flag, we do not need to print it before setting the flag. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: separate PF only stats so that VF does not display themJeff Kirsher1-14/+37
This patch resolves an issue with ethtool stats displaying useless values on the VF, because some stats simply have no meaning to the VF. Resolve this by splitting these out into PF_STATS and only showing them if we aren't the VF. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: use hw->mac.max_queues for statsJeff Kirsher2-8/+12
Even though it shouldn't strictly matter, don't count queue stats higher than the max_queues value stored for this mac. This ensures that we don't attempt to check queues which don't belong to use in VFs. This shouldn't be a visible change, as the VFs should see zero for queues which don't belong to them. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: only show actual queues, not the maximum in hardwareJeff Kirsher1-2/+3
Currently, we show statistics for all 128 queues, even though we don't necessarily have that many queues available especially in the VF case. Instead, use the hw->mac.max_queues value, which tells us how many queues we actually have, rather than the space for the rings we allocated. In this way, we prevent dumping statistics that are useless on the VF. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: allow creation of VLAN on default vidJeff Kirsher1-4/+4
Previously, the user was not allowed to create a VLAN interface on top of the switch default vid. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14Merge branch 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds11-21/+15
Pull vfs update from Al Viro: "Part one: - struct filename-related cleanups - saner iov_iter_init() replacements (and switching the syscalls to use of those) - ntfs switch to ->write_iter() (Anton) - aio cleanups and splitting iocb into common and async parts (Christoph) - assorted fixes (me, bfields, Andrew Elble) There's a lot more, including the completion of switchover to ->{read,write}_iter(), d_inode/d_backing_inode annotations, f_flags race fixes, etc, but that goes after #for-davem merge. David has pulled it, and once it's in I'll send the next vfs pull request" * 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (35 commits) sg_start_req(): use import_iovec() sg_start_req(): make sure that there's not too many elements in iovec blk_rq_map_user(): use import_single_range() sg_io(): use import_iovec() process_vm_access: switch to {compat_,}import_iovec() switch keyctl_instantiate_key_common() to iov_iter switch {compat_,}do_readv_writev() to {compat_,}import_iovec() aio_setup_vectored_rw(): switch to {compat_,}import_iovec() vmsplice_to_user(): switch to import_iovec() kill aio_setup_single_vector() aio: simplify arguments of aio_setup_..._rw() aio: lift iov_iter_init() into aio_setup_..._rw() lift iov_iter into {compat_,}do_readv_writev() NFS: fix BUG() crash in notify_change() with patch to chown_common() dcache: return -ESTALE not -EBUSY on distributed fs race NTFS: Version 2.1.32 - Update file write from aio_write to write_iter. VFS: Add iov_iter_fault_in_multipages_readable() drop bogus check in file_open_root() switch security_inode_getattr() to struct path * constify tomoyo_realpath_from_path() ...
2015-04-14fm10k: fix unused warningsJeff Kirsher7-37/+35
The were several functions which had parameters which were never or sometimes used in functions. To resolve possible compiler warnings, use __always_unused or __maybe_unused kernel macros to resolve. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: Add netconsole supportJeff Kirsher3-0/+28
This change adds a function called "fm10k_netpoll" that's used to define "ndo_poll_controller" in "fm10k_netdev_ops". This is required to enable support for "netconsole" in fm10k. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: Have the VF get the default VLAN during initJeff Kirsher1-1/+5
Currently, the VFs do not read the default VLAN during initialization, so they will not be able to indicate untagged frames properly. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: Correct spelling mistakeJeff Kirsher1-2/+2
Corrected a spelling mistake that was found over time. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: Remove redundant rx_errors in ethtoolJeff Kirsher3-7/+4
Output of ethtool was reporting 2 rx_errors entries. This change removes one of the redundant entries. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
2015-04-14fm10k: Corrected an error in Tx statisticsJeff Kirsher1-2/+2
The function collecting Tx statistics was actually using values from the RX ring. Thus, Tx and Rx statistics values reported by "ifconfig" will return identical values. This change corrects this error and the Tx statistics is now reading from the Tx ring. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
2015-04-14Merge branch 'devel-stable' into for-nextRussell King314-2582/+4015
2015-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-15/+30
The dwmac-socfpga.c conflict was a case of a bug fix overlapping changes in net-next to handle an error pointer differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14cxgb4: Don't call t4_slow_intr_handler when we're not the Master PFHariprasad Shenai2-3/+6
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14cxgb4: Add comment for calculate tx flits and sge length codeHariprasad Shenai1-1/+35
Add comment for tx filt and sge length calucaltion code, also remove a hardcoded value Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14cxgb4: Use device node in page allocationHariprasad Shenai1-2/+4
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14cxgb4: Freelist starving threshold varies from adapter to adapterHariprasad Shenai1-10/+16
fl_starv_thres could be different from adapter to adapter, don't use hardcoded values Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14cxgb4: Increased the value of MAX_IMM_TX_PKT_LEN from 128 to 256 bytesHariprasad Shenai1-1/+1
This allows a significant latency drop for packets of sizes between 128 and 192 bytes Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14bgmac: drop ring->num_slotsFelix Fietkau2-15/+15
The ring size is always known at compile time, so make the code a bit more efficient Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14bgmac: fix DMA rx corruptionFelix Fietkau1-9/+18
The driver needs to inform the hardware about the first invalid (not yet filled) rx slot, by writing its DMA descriptor pointer offset to the BGMAC_DMA_RX_INDEX register. This register was set to a value exceeding the rx ring size, effectively allowing the hardware constant access to the full ring, regardless of which slots are initialized. To fix this issue, always mark the last filled rx slot as invalid. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14bgmac: simplify dma init/cleanupFelix Fietkau1-39/+40
Instead of allocating buffers at device init time and initializing descriptors at device open, do both at the same time (during open). Free all buffers when closing the device. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14bgmac: increase rx ring size from 511 to 512Felix Fietkau1-1/+1
Limiting it to 511 looks like a failed attempt at leaving one descriptor empty to allow the hardware to stop processing a buffer that has not been prepared yet. However, this doesn't work because this affects the total ring size as well Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14bgmac: add check for oversized packetsFelix Fietkau1-0/+7
In very rare cases, the MAC can catch an internal buffer that is bigger than it's supposed to be. Instead of crashing the kernel, simply pass the buffer back to the hardware Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14bgmac: simplify/optimize rx DMA error handlingFelix Fietkau1-37/+34
Allocate a new buffer before processing the completed one. If allocation fails, reuse the old buffer. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14bgmac: set received skb headroom to NET_SKB_PADFelix Fietkau2-7/+11
A packet buffer offset of 30 bytes is inefficient, because the first 2 bytes end up in a different cacheline. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14bgmac: leave interrupts disabled as long as there is work to doFelix Fietkau2-22/+10
Always poll rx and tx during NAPI poll instead of relying on the status of the first interrupt. This prevents bgmac_poll from leaving unfinished work around until the next IRQ. In my tests this makes bridging/routing throughput under heavy load more stable and ensures that no new IRQs arrive as long as bgmac_poll uses up the entire budget. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14bgmac: simplify tx ring index handlingFelix Fietkau2-29/+23
Keep incrementing ring->start and ring->end instead of pointing it to the actual ring slot entry. This simplifies the calculation of the number of free slots. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14toshiba: Remove celleb from Kconfig optionsDaniel Axtens1-2/+2
The toshiba drivers had celleb as an optional dependency. celleb has been dropped [1], so clean that out of Kconfig. [1] http://patchwork.ozlabs.org/patch/451730/ CC: netdev@vger.kernel.org CC: Valentin Rothberg <valentinrothberg@gmail.com> CC: mpe@ellerman.id.au CC: linuxppc-dev@lists.ozlabs.org Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14hv_netvsc: Implement partial copy into send bufferHaiyang Zhang3-19/+46
If remaining space in a send buffer slot is too small for the whole message, we only copy the RNDIS header and PPI data into send buffer, so we can batch one more packet each time. It reduces the vmbus per-message overhead. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-14Merge tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds14-655/+930
Pull tracing updates from Steven Rostedt: "Some clean ups and small fixes, but the biggest change is the addition of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints. Tracepoints have helper functions for the TP_printk() called __print_symbolic() and __print_flags() that lets a numeric number be displayed as a a human comprehensible text. What is placed in the TP_printk() is also shown in the tracepoint format file such that user space tools like perf and trace-cmd can parse the binary data and express the values too. Unfortunately, the way the TRACE_EVENT() macro works, anything placed in the TP_printk() will be shown pretty much exactly as is. The problem arises when enums are used. That's because unlike macros, enums will not be changed into their values by the C pre-processor. Thus, the enum string is exported to the format file, and this makes it useless for user space tools. The TRACE_DEFINE_ENUM() solves this by converting the enum strings in the TP_printk() format into their number, and that is what is shown to user space. For example, the tracepoint tlb_flush currently has this in its format file: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) After adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); Its format file will contain this: __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" })" * tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits) tracing: Add enum_map file to show enums that have been mapped writeback: Export enums used by tracepoint to user space v4l: Export enums used by tracepoints to user space SUNRPC: Export enums in tracepoints to user space mm: tracing: Export enums in tracepoints to user space irq/tracing: Export enums in tracepoints to user space f2fs: Export the enums in the tracepoints to userspace net/9p/tracing: Export enums in tracepoints to userspace x86/tlb/trace: Export enums in used by tlb_flush tracepoint tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM() tracing: Allow for modules to convert their enums to values tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation tracing: Give system name a pointer brcmsmac: Move each system tracepoints to their own header iwlwifi: Move each system tracepoints to their own header mac80211: Move message tracepoints to their own header tracing: Add TRACE_SYSTEM_VAR to xhci-hcd tracing: Add TRACE_SYSTEM_VAR to kvm-s390 tracing: Add TRACE_SYSTEM_VAR to intel-sst ...
2015-04-14Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds31-40/+38
Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags
2015-04-14Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds38-695/+2781
Pull HID updates from Jiri Kosina: - quite a few firmware fixes for RMI driver by Andrew Duggan - huion and uclogic drivers have been substantially overlaping in functionality laterly. This redundancy is fixed by hid-huion driver being merged into hid-uclogic; work done by Benjamin Tissoires and Nikolai Kondrashov - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg - Some of the quirks, that got separated into individual drivers, have historically had EXPERT dependency. As HID subsystem matured (as well as the individual drivers), this made less and less sense. This dependency is now being removed by patch from Jean Delvare - Logitech lg4ff driver received a couple of improvements for mode switching, by Michal Malý - multitouch driver now supports clickpads, patches by Benjamin Tissoires and Seth Forshee - hid-sensor framework received a substantial update; namely support for Custom and Generic pages is being added; work done by Srinivas Pandruvada - wacom driver received substantial update; it now supports i2c-conntected devices (Mika Westerberg), Bamboo PADs are now properly supported (Benjamin Tissoires), much improved battery reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng) - small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) HID: sensor: Update document for custom sensor HID: sensor: Custom and Generic sensor support HID: debug: fix error handling in hid_debug_events_read() Input - mt: Fix input_mt_get_slot_by_key HID: logitech-hidpp: fix error return code HID: wacom: Add support for Cintiq 13HD Touch HID: logitech-hidpp: add a module parameter to keep firmware gestures HID: usbhid: yet another mouse with ALWAYS_POLL HID: usbhid: more mice with ALWAYS_POLL HID: wacom: set stylus_in_proximity before checking touch_down HID: wacom: use wacom_wac_finger_count_touches to set touch_down HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT HID: pidff: effect can't be NULL HID: add quirk for PIXART OEM mouse used by HP HID: add HP OEM mouse to quirk ALWAYS_POLL HID: wacom: ask for a in-prox report when it was missed HID: hid-sensor-hub: Fix sparse warning HID: hid-sensor-hub: fix attribute read for logical usage id HID: plantronics: fix Kconfig default HID: pidff: support more than one concurrent effect ...
2015-04-14ACPI / battery: Fix doubly added battery on system suspendKrzysztof Kozlowski1-1/+1
Commit 297d716f6260 ("power_supply: Change ownership from driver to core") inverted the logic in battery_notify(). As an effect already present battery was re-added on each system suspend or hibernation. WARNING: CPU: 0 PID: 303 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x80() sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0A:00/power_supply/BAT0' CPU: 0 PID: 303 Comm: rtcwake Not tainted 4.0.0-ARCH-02621-g07e6253af953 #48 Call Trace: sysfs_create_dir_ns+0x8d/0xa0 kobject_add_internal+0xb6/0x370 kobject_add+0x6f/0xd0 device_add+0x120/0x6c0 __power_supply_register+0x145/0x290 power_supply_register_no_ws+0x10/0x20 sysfs_add_battery+0x84/0xc5 [battery] battery_notify+0x45/0x6b [battery] notifier_call_chain+0x4f/0x80 __blocking_notifier_call_chain+0x4b/0x70 blocking_notifier_call_chain+0x16/0x20 pm_notifier_call_chain+0x1a/0x40 pm_suspend+0x3ed/0x4e0 Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14Merge branch 'next' into for-linusDmitry Torokhov4611-129799/+242071
Prepare first round of input updates for 4.1 merge window.
2015-04-14Merge branches 'powercap' and 'pm-devfreq'Rafael J. Wysocki4-224/+291
* powercap: powercap / RAPL: mark rapl_ids array as __initconst powercap / RAPL: add ID for Broadwell server * pm-devfreq: PM / devfreq: tegra: Register governor on module init PM / devfreq: tegra: Enable interrupts after resuming the devfreq monitor PM / devfreq: tegra: Set drvdata before enabling the irq PM / devfreq: tegra: remove operating-points PM / devfreq: tegra: Use clock rate constraints PM / devfreq: tegra: Update to v5 of the submitted patches PM / devfreq: correct misleading comment PM / devfreq: event: Add const keyword for devfreq_event_ops structure
2015-04-14Merge branch 'acpi-scan'Rafael J. Wysocki1-2/+4
* acpi-scan: ACPI / scan: Fix NULL pointer dereference in acpi_companion_match()
2015-04-13Merge tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds806-23663/+38374
Pull staging driver updates from Greg KH: "Here's the big staging driver patchset for 4.1-rc1. There's a lot of patches here, the Outreachy application period happened during this development cycle, so that means that there was a lot of cleanup patches accepted. Other than the normal coding style and sparse fixes here, there are some driver updates and work toward making some of the drivers into "mergable" shape (like the Unisys drivers.) All of these have been in linux-next for a while" * tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1214 commits) staging: lustre: orthography & coding style staging: lustre: lnet: lnet: fix error return code staging: lustre: fix sparse warning Revert "Staging: sm750fb: Fix C99 Comments" Staging: rtl8192u: use correct array for debug output staging: rtl8192e: Remove dead code staging: rtl8192e: Comment cleanup (style/format) staging: rtl8192e: Fix indentation in rtllib_rx_auth_resp() staging: rtl8192e: Decrease nesting of rtllib_rx_auth_resp() staging: rtl8192e: Divide rtllib_rx_auth() staging: rtl8192e: Fix PRINTK_WITHOUT_KERN_LEVEL warnings staging: rtl8192e: Fix DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON warning staging: rtl8192e: Fix BRACES warning staging: rtl8192e: Fix LINE_CONTINUATIONS warning staging: rtl8192e: Fix UNNECESSARY_PARENTHESES warnings staging: rtl8192e: remove unused EXPORT_SYMBOL_RSL macro staging: rtl8192e: Fix RETURN_VOID warnings staging: rtl8192e: Fix UNNECESSARY_ELSE warning staging: rtl8723au: Remove unneeded comments staging: rtl8723au: Use __func__ in trace logs ...
2015-04-13Merge tag 'driver-core-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds15-89/+129
Pull driver core updates from Greg KH: "Here's the driver-core / kobject / lz4 tree update for 4.1-rc1. Everything here has been in linux-next for a while with no reported issues. It's mostly just coding style cleanups, with other minor changes in here as well, nothing big" * tag 'driver-core-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) debugfs: allow bad parent pointers to be passed in stable_kernel_rules: Add clause about specification of kernel versions to patch. kobject: WARN as tip when call kobject_get() to a kobject not initialized lib/lz4: Pull out constant tables drivers: platform: parse IRQ flags from resources driver core: Make probe deferral more quiet drivers/core/of: Add symlink to device-tree from devices with an OF node device: Add dev_of_node() accessor drivers: base: fw: fix ret value when loading fw firmware: Avoid manual device_create_file() calls drivers/base: cacheinfo: validate device node for all the caches drivers/base: use tabs where possible in code indentation driver core: add missing blank line after declaration drivers: base: node: Delete space after pointer declaration drivers: base: memory: Use tabs instead of spaces firmware_class: Fix whitespace and indentation drivers: base: dma-mapping: Erase blank space after pointer drivers: base: class: Add a blank line after declarations attribute_container: fix missing blank lines after declarations drivers: base: memory: Fix switch indent ...
2015-04-13Merge tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds134-2803/+5415
Pull USB driver updates from Greg KH: "Here's the big USB (and PHY) driver patchset for 4.1-rc1. Everything here has been in linux-next, and the full details are below in the shortlog. Nothing major, just the normal round of new drivers,api updates, and other changes, mostly in the USB gadget area, as usual" * tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (252 commits) drivers/usb/core: devio.c: Removed an uneeded space before tab usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume usb: chipidea: debug: add low power mode check before print registers usb: chipidea: udc: bypass pullup DP when gadget connect in OTG fsm mode usb: core: hub: use new USB_RESUME_TIMEOUT usb: isp1760: hcd: use new USB_RESUME_TIMEOUT usb: dwc2: hcd: use new USB_RESUME_TIMEOUT usb: host: sl811: use new USB_RESUME_TIMEOUT usb: host: r8a66597: use new USB_RESUME_TIMEOUT usb: host: oxu210hp: use new USB_RESUME_TIMEOUT usb: host: fusbh200: use new USB_RESUME_TIMEOUT usb: host: fotg210: use new USB_RESUME_TIMEOUT usb: host: isp116x: use new USB_RESUME_TIMEOUT usb: musb: use new USB_RESUME_TIMEOUT usb: host: uhci: use new USB_RESUME_TIMEOUT usb: host: ehci: use new USB_RESUME_TIMEOUT usb: host: xhci: use new USB_RESUME_TIMEOUT usb: define a generic USB_RESUME_TIMEOUT macro usb: musb: dsps: fix build on i386 when COMPILE_TEST is set ehci-hub: use USB_DT_HUB ...
2015-04-13Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds34-818/+707
Pull libata updates from Tejun Heo: - Hannes's patchset implements support for better error reporting introduced by the new ATA command spec. - the deperecated pci_ dma API usages have been replaced by dma_ ones. - a bunch of hardware specific updates and some cleanups. * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: remove deprecated use of pci api ahci: st: st_configure_oob must be called after IP is clocked. ahci: st: Update the ahci_st DT documentation ahci: st: Update the DT example for how to obtain the PHY. sata_dwc_460ex: indent an if statement libata: Add tracepoints libata-eh: Set 'information' field for autosense libata: Implement support for sense data reporting libata: Implement NCQ autosense libata: use status bit definitions in ata_dump_status() ide,ata: Rename ATA_IDX to ATA_SENSE libata: whitespace fixes in ata_to_sense_error() libata: whitespace cleanup in ata_get_cmd_descript() libata: use READ_LOG_DMA_EXT libata: remove ATA_FLAG_LOWTAG sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev sata_dwc_460ex: move to generic DMA driver sata_dwc_460ex: join messages back sata: xgene: add ACPI support for APM X-Gene SATA ports ata: sata_mv: add proper definitions for LP_PHY_CTL register values
2015-04-14Merge branch 'next-sriov' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc into nextMichael Ellerman3-57/+195
Merge Richard's work to support SR-IOV on PowerNV. All generic PCI patches acked by Bjorn. Some minor conflicts with Daniel's pci_controller_ops work. Conflicts: arch/powerpc/include/asm/machdep.h arch/powerpc/platforms/powernv/pci-ioda.c
2015-04-13Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-0/+1
Pull workqueue updates from Tejun Heo: "Workqueue now prints debug information at the end of sysrq-t which should be helpful when tracking down suspected workqueue stalls. It only prints out the ones with something currently going on so it shouldn't add much output in most cases" * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Reorder sysfs code percpu: Fix trivial typos in comments workqueue: dump workqueues on sysrq-t workqueue: keep track of the flushing task and pool manager workqueue: make the workqueues list RCU walkable
2015-04-13Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds16-209/+1211
Pull irq core updates from Thomas Gleixner: "Managerial summary: Core code: - final removal of IRQF_DISABLED - new state save/restore functions for virtualization support - wakeup support for stacked irqdomains - new function to solve the netpoll synchronization problem irqchips: - new driver for STi based devices - new driver for Vybrid MSCM - massive cleanup of the GIC driver by moving the GIC-addons to stacked irqdomains - the usual pile of fixes and updates to the various chip drivers" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) irqchip: GICv3: Add support for irq_[get, set]_irqchip_state() irqchip: GIC: Add support for irq_[get, set]_irqchip_state() genirq: Allow the irqchip state of an IRQ to be save/restored genirq: MSI: Fix freeing of unallocated MSI irqchip: renesas-irqc: Add wake-up support irqchip: armada-370-xp: Allow using wakeup source irqchip: mips-gic: Add new functions to start/stop the GIC counter irqchip: tegra: Add Tegra210 support irqchip: digicolor: Move digicolor_set_gc to init section irqchip: renesas-irqc: Add functional clock to bindings irqchip: renesas-irqc: Add minimal runtime PM support irqchip: renesas-irqc: Add more register documentation DT: exynos: update PMU binding ARM: exynos4/5: convert pmu wakeup to stacked domains irqchip: gic: Don't complain in gic_get_cpumask() if UP system ARM: zynq: switch from gic_arch_extn to gic_set_irqchip_flags ARM: ux500: switch from gic_arch_extn to gic_set_irqchip_flags ARM: shmobile: remove use of gic_arch_extn.irq_set_wake irqchip: gic: Add an entry point to set up irqchip flags ARM: omap: convert wakeupgen to stacked domains ...
2015-04-13Merge tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds31-134/+793
Pull PCI changes from Bjorn Helgaas: "Enumeration - Read capability list as dwords, not bytes (Sean O. Stalley) Resource management - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas) - Mark invalid BARs as unassigned (Bjorn Helgaas) - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas) - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas) - Assign resources before drivers claim devices (Yijing Wang) - Claim bus resources before pci_bus_add_devices() (Yijing Wang) Power management - Optimize device state transition delays (Aaron Lu) - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett) Virtualization - Add ACS quirks for Intel 1G NICs (Alex Williamson) IOMMU - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri) - Move of_dma_configure() to device.c to help re-use (Murali Karicheri) - Fix size when dma-range is not used (Murali Karicheri) - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri) - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri) - Update DMA configuration from DT (Murali Karicheri) - dma-mapping: limit IOMMU mapping size (Murali Karicheri) - Calculate device DMA masks based on DT dma-range size (Murali Karicheri) ARM Versatile host bridge driver - Check for devm_ioremap_resource() failures (Jisheng Zhang) Broadcom iProc host bridge driver - Add Broadcom iProc PCIe driver (Ray Jui) Marvell MVEBU host bridge driver - Add suspend/resume support (Thomas Petazzoni) Renesas R-Car host bridge driver - Fix position of MSI enable bit (Nobuhiro Iwamatsu) - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu) - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu) - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu) Samsung Exynos host bridge driver - Fix INTx enablement statement termination error (Jaehoon Chung) Miscellaneous - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu) - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)" * tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits) PCI: Read capability list as dwords, not bytes PCI: layerscape: Simplify platform_get_resource_byname() failure checking PCI: keystone: Don't dereference possible NULL pointer PCI: versatile: Check for devm_ioremap_resource() failures PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message PCI: exynos: Fix INTx enablement statement termination error PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules PCI: Add ACS quirks for Intel 1G NICs PCI: mvebu: Add suspend/resume support PCI: Cleanup control flow sparc/PCI: Claim bus resources before pci_bus_add_devices() PCI: Assign resources before drivers claim devices (pci_scan_root_bus()) PCI: Fail pci_ioremap_bar() on unassigned resources ...
2015-04-13Merge tag 'hsi-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds4-2/+1501
Pull HSI changes from Sebastian Reichel: - nokia-modem: support speech data - misc fixes * tag 'hsi-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: cmt_speech: fix error return code HSI: nokia-modem: Add cmt-speech support HSI: cmt_speech: Add cmt-speech driver HSI: nokia-modem: fix error return code
2015-04-13Merge tag 'for-v4.1' of git://git.infradead.org/battery-2.6Linus Torvalds92-2073/+5270
Pull power supply and reset changes from Sebastian Reichel: - new API for safe access of power supply function attrs - devres support for power supply (un)registration - new drivers / chips: - generic syscon based poweroff driver - iio & charger driver for da9150 - fuel gauge driver for axp288 - bq27x00: add support for bq27510 - bq2415x: add support for bq24157s - twl4030-madc-battery: convert to iio consumer - misc fixes * tag 'for-v4.1' of git://git.infradead.org/battery-2.6: (66 commits) power: twl4030_madc_battery: Add missing MODULE_ALIAS power: twl4030-madc-battery: Convert to iio consumer. dt: power: Add docs for generic SYSCON poweroff driver. power: reset: Add generic SYSCON register mapped poweroff. power: max17042_battery: add missed blank power: max17042_battery: Use reg type instead of chip type power/reset: at91: big endian fixes for atsama5d3x power_supply: charger-manager: Fix dereferencing of ERR_PTR HID: input: Fix NULL pointer dereference when power_supply_register fails power: constify of_device_id array power/reset/rmobile-reset.c: Fix !HAS_IOMEM build power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable arm: mach-pxa: Decrement the power supply's device reference counter mfd: ab8500: Decrement the power supply's device reference counter power_supply: bq2415x_charger: Decrement the power supply's device reference counter power_supply: 88pm860x_charger: Decrement the power supply's device reference counter x86/olpc/xo15/sci: Use newly added power_supply_put API x86/olpc/xo1/sci: Use newly added power_supply_put API power_supply: charger-manager: Decrement the power supply's device reference counter power_supply: Increment power supply use counter when obtaining references ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.