aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-09-06soc: qcom: geni: Provide parameter error checkingLee Jones1-0/+6
When booting with ACPI, the Geni Serial Engine is not set as the I2C/SPI parent and thus, the wrapper (parent device) is unassigned. This causes the kernel to crash with a null dereference error. Link: https://lore.kernel.org/r/20190905082555.15020-1-lee.jones@linaro.org Fixes: 8bc529b25354 ("soc: qcom: geni: Add support for ACPI") Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-06iommu/amd: Fix race in increase_address_space()Joerg Roedel1-5/+11
After the conversion to lock-less dma-api call the increase_address_space() function can be called without any locking. Multiple CPUs could potentially race for increasing the address space, leading to invalid domain->mode settings and invalid page-tables. This has been happening in the wild under high IO load and memory pressure. Fix the race by locking this operation. The function is called infrequently so that this does not introduce a performance regression in the dma-api path again. Reported-by: Qian Cai <cai@lca.pw> Fixes: 256e4621c21a ('iommu/amd: Make use of the generic IOVA allocator') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-06iommu/amd: Flush old domains in kdump kernelStuart Hayes1-0/+24
When devices are attached to the amd_iommu in a kdump kernel, the old device table entries (DTEs), which were copied from the crashed kernel, will be overwritten with a new domain number. When the new DTE is written, the IOMMU is told to flush the DTE from its internal cache--but it is not told to flush the translation cache entries for the old domain number. Without this patch, AMD systems using the tg3 network driver fail when kdump tries to save the vmcore to a network system, showing network timeouts and (sometimes) IOMMU errors in the kernel log. This patch will flush IOMMU translation cache entries for the old domain when a DTE gets overwritten with a new domain number. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Fixes: 3ac3e5ee5ed5 ('iommu/amd: Copy old trans table from old kernel') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-09-06Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-nextDave Airlie1-1/+3
single etnaviv fix for an error path. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/4ae00cfb47c8e6fffca5dbb45ae9370cd4e5eaf4.camel@pengutronix.de
2019-09-06Merge tag 'drm-next-5.4-2019-08-30' of git://people.freedesktop.org/~agd5f/linux into drm-nextDave Airlie99-140/+91412
drm-next-5.4-2019-08-30: amdgpu: - Add DC support for Renoir - Add some GPUVM hw bug workarounds - add support for the smu11 i2c controller - GPU reset vram lost bug fixes - Navi1x powergating fixes - Navi12 power fixes - Renoir power fixes - Misc bug fixes and cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190830212650.5055-1-alexander.deucher@amd.com
2019-09-06Merge tag 'drm-misc-fixes-2019-09-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixesDave Airlie4-9/+187
drm-misc-fixes for v5.3 final: - Make ingenic panel type DPI insteado f unknown. - Fixes for command line parser modes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/606d87b2-1840-c893-eb30-d6c471c9e50a@linux.intel.com
2019-09-06Merge branch 'vmwgfx-fixes-5.3' of git://people.freedesktop.org/~thomash/linux into drm-fixesDave Airlie1-5/+3
Single vmwgfx double free fix. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-09-06iio: hid-sensor-attributes: Fix divisions for 32-bit platformsAndy Shevchenko1-14/+28
The commit 473d12f7638c ("iio: hid-sensor-attributes: Convert to use int_pow()") converted to use generic int_pow() helper. Though, the generic one returns 64-bit value and, in cases when it is used as divisor, it compels 64-bit division from compiler. In order to fix this, introduce a temporary 32-bit variable to hold the result of int_pow() and use it as divisor afterwards. In couple of cases, replace int_pow() with a predefined unit factors for time and frequency. Fixes: 473d12f7638c ("iio: hid-sensor-attributes: Convert to use int_pow()") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20190905112759.13035-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-06drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915Weinan Li1-0/+17
The guest may use this register to identify the running state of one context. Emulate it as the value in context image as if the context runs on the GPU hardware. Signed-off-by: Weinan Li <weinan.z.li@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-09-06drm/i915/gvt: update vgpu workload head pointer correctlyXiaolin Zhang1-13/+15
when creating a vGPU workload, the guest context head pointer should be updated correctly by comparing with the exsiting workload in the guest worklod queue including the current running context. in some situation, there is a running context A and then received 2 new vGPU workload context B and A. in the new workload context A, it's head pointer should be updated with the running context A's tail. v2: walk through guest workload list in backward way. Cc: stable@vger.kernel.org Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-09-05sd: Set ELEVATOR_F_ZBD_SEQ_WRITE for ZBC disksDamien Le Moal1-0/+2
Using the helper blk_queue_required_elevator_features(), set the elevator feature ELEVATOR_F_ZBD_SEQ_WRITE as required for the request queue of SCSI ZBC disks. This feature requirement can always be satisfied as the mq-deadline elevator is always selected for in-kernel compilation when CONFIG_BLK_DEV_ZONED (zoned block device support) is enabled. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05block: Set ELEVATOR_F_ZBD_SEQ_WRITE for nullblk zoned disksDamien Le Moal1-0/+2
Using the helper blk_queue_required_elevator_features(), set the elevator feature ELEVATOR_F_ZBD_SEQ_WRITE as required for the request queue of null_blk devices created with zoned mode enabled. This feature requirement can always be satisfied as the mq-deadline elevator is always selected for in-kernel compilation when CONFIG_BLK_DEV_ZONED (zoned block device support) is enabled. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05block: Delay default elevator initializationDamien Le Moal1-1/+1
When elevator_init_mq() is called from blk_mq_init_allocated_queue(), the only information known about the device is the number of hardware queues as the block device scan by the device driver is not completed yet for most drivers. The device type and elevator required features are not set yet, preventing to correctly select the default elevator most suitable for the device. This currently affects all multi-queue zoned block devices which default to the "none" elevator instead of the required "mq-deadline" elevator. These drives currently include host-managed SMR disks connected to a smartpqi HBA and null_blk block devices with zoned mode enabled. Upcoming NVMe Zoned Namespace devices will also be affected. Fix this by adding the boolean elevator_init argument to blk_mq_init_allocated_queue() to control the execution of elevator_init_mq(). Two cases exist: 1) elevator_init = false is used for calls to blk_mq_init_allocated_queue() within blk_mq_init_queue(). In this case, a call to elevator_init_mq() is added to __device_add_disk(), resulting in the delayed initialization of the queue elevator after the device driver finished probing the device information. This effectively allows elevator_init_mq() access to more information about the device. 2) elevator_init = true preserves the current behavior of initializing the elevator directly from blk_mq_init_allocated_queue(). This case is used for the special request based DM devices where the device gendisk is created before the queue initialization and device information (e.g. queue limits) is already known when the queue initialization is executed. Additionally, to make sure that the elevator initialization is never done while requests are in-flight (there should be none when the device driver calls device_add_disk()), freeze and quiesce the device request queue before calling blk_mq_init_sched() in elevator_init_mq(). Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05Input: sidewinder - make array seq static const, makes object smallerColin Ian King1-1/+1
Don't populate the array seq on the stack but instead make it static const. Makes the object code smaller by 30 bytes. Before: text data bss dec hex filename 22284 3184 0 25468 637c drivers/input/joystick/sidewinder.o After: text data bss dec hex filename 22158 3280 0 25438 635e drivers/input/joystick/sidewinder.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-05Input: reset device timestamp on syncDmitry Torokhov1-0/+7
We need to reset input device's timestamp on input_sync(), otherwise drivers not using input_set_timestamp() will end up with a stale timestamp after their clients consume first input event. Fixes: 3b51c44bd693 ("Input: allow drivers specify timestamp for input events") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-05libnvdimm: Use PAGE_SIZE instead of SZ_4K for align checkAneesh Kumar K.V2-7/+7
Architectures have different page size than 4K. Use the PAGE_SIZE to make sure ranges are correctly aligned. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/20190905154603.10349-7-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-05libnvdimm/label: Remove the dpa align checkAneesh Kumar K.V1-5/+0
There's no strict requirement why slot_valid() needs to check for page alignment and it would seem to actively hurt cross-page-size compatibility. Let's delete the check and rely on checksum validation. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/20190905154603.10349-6-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-05libnvdimm/pfn_dev: Add page size and struct page size to pfn superblockAneesh Kumar K.V2-2/+28
This is needed so that pmem probe don't wrongly initialize a namespace which doesn't have enough space reserved for holding struct pages with the current kernel. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/20190905154603.10349-5-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-05libnvdimm/pfn_dev: Add a build check to make sure we notice when struct page size changeAneesh Kumar K.V2-1/+13
Namespaces created with PFN_MODE_PMEM mode stores struct page in the reserve block area. We need to make sure we account for the right struct page size while doing this. Instead of directly depending on sizeof(struct page) which can change based on different kernel config option, use the max struct page size (64) while calculating the reserve block area. This makes sure pmem device can be used across kernels built with different configs. If the above assumption of max struct page size change, we need to update the reserve block allocation space for new namespaces created. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/20190905154603.10349-4-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-05libnvdimm/pmem: Advance namespace seed for specific probe errorsAneesh Kumar K.V2-5/+27
In order to support marking namespaces with unsupported feature/versions disabled, nvdimm core should advance the namespace seed on these probe failures. Otherwise, these failed namespaces will be considered a seed namespace and will be wrongly used while creating new namespaces. Add -EOPNOTSUPP as return from pmem probe callback to indicate a namespace initialization failures due to pfn superblock feature/version mismatch. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/20190905154603.10349-3-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-05libnvdimm/region: Rewrite _probe_success() to _advance_seeds()Dan Williams4-71/+41
The nd_region_probe_success() helper collides seed management with nvdimm->busy tracking. Given the 'busy' increment is handled internal to the nd_region driver 'probe' path move the decrement to the 'remove' path. With that cleanup the routine can be renamed to the more descriptive nd_region_advance_seeds(). The change is prompted by an incoming need to optionally advance the seeds on other events besides 'probe' success. Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Link: https://lore.kernel.org/r/20190905154603.10349-2-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-05PCI: Add ACS quirk for iProc PAXBAbhinav Ratna1-0/+14
iProc PAXB Root Ports don't advertise an ACS capability, but they do not allow peer-to-peer transactions between Root Ports. Add an ACS quirk so each Root Port can be in a separate IOMMU group. [bhelgaas: commit log, comment, use common implementation style] Link: https://lore.kernel.org/r/1566275985-25670-1-git-send-email-srinath.mannam@broadcom.com Signed-off-by: Abhinav Ratna <abhinav.ratna@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Scott Branden <scott.branden@broadcom.com>
2019-09-06parisc: Save some bytes in dino driverHelge Deller1-3/+3
Signed-off-by: Helge Deller <deller@gmx.de>
2019-09-05PCI: Force trailing new line to resource_alignment_param in sysfsLogan Gunthorpe1-0/+10
When 'pci=resource_alignment=' is specified on the command line, there is no trailing new line. Then, when it's read through the corresponding sysfs attribute, there will be no newline and a cat command will not show correctly in a shell. If the parameter is set through sysfs a new line will be stored and it will 'cat' correctly. To solve this, append a new line character in the show function if one does not already exist. Link: https://lore.kernel.org/r/20190822161013.5481-4-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: Move pci_[get|set]_resource_alignment_param() into their callersLogan Gunthorpe1-20/+12
Both the functions pci_get_resource_alignment_param() and pci_set_resource_alignment_param() are now only called in one place: resource_alignment_show() and resource_alignment_store() respectively. There is no value in this extra set of functions so move both into their callers respectively. [bhelgaas: fold in "GFP_KERNEL while atomic" fix from Christoph Hellwig <hch@infradead.org> https://lore.kernel.org/r/20190902075006.GB754@infradead.org] Link: https://lore.kernel.org/r/20190822161013.5481-3-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05net/mlx5e: Add port buffer's congestion countersAya Levin2-1/+150
Add 3 counters per priority to ethtool using PPCNT: 1) rx_prio[p]_buf_discard - the number of packets discarded by device due to lack of per host receive buffers 2) rx_prio[p]_cong_discard - the number of packets discarded by device due to per host congestion 3) rx_prio[p]_marked - the number of packets ECN marked by device due to per host congestion Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: DR, Remove redundant dev_name print from err logSaeed Mahameed1-10/+5
mlx5_core_err already prints the name of the device. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: DR, Fix error return code in dr_domain_init_resources()Wei Yongjun1-0/+3
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: 4ec9e7b02697 ("net/mlx5: DR, Expose steering domain functionality") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: DR, Remove useless set memory to zero use memset()Wei Yongjun1-1/+0
The memory return by kzalloc() has already be set to zero, so remove useless memset(0). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5e: Remove unnecessary clear_bit()sMaxim Mikityanskiy1-2/+0
Don't clear MLX5E_SQ_STATE_ENABLED on error in mlx5e_open_txqsq and mlx5e_open_icosq, because it's not set there, and is 0 by default. Fixes: acc6c5953af1 ("net/mlx5e: Split open/close channels to stages") Fixes: 9d18b5144a0a ("net/mlx5e: Split open/close ICOSQ into stages") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5e: kTLS, Remove unused function parameterTariq Toukan1-4/+2
SKB parameter is no longer used in tx_post_resync_dump(), remove it. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: Use PTR_ERR_OR_ZERO rather than its implementationzhong jiang1-4/+1
PTR_ERR_OR_ZERO contains if(IS_ERR(...)) + PTR_ERR. It is better to use it directly. hence just replace it. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: fix missing assignment of variable errColin Ian King1-1/+1
The error return from a call to mlx5_flow_namespace_set_peer is not being assigned to variable err and hence the error check following the call is currently not working. Fix this by assigning ret as intended. Addresses-Coverity: ("Logically dead code") Fixes: 8463daf17e80 ("net/mlx5: Add support to use SMFS in switchdev mode") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: fix spelling mistake "offlaods" -> "offloads"Colin Ian King1-1/+1
There is a spelling mistake in a NL_SET_ERR_MSG_MOD error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5e: Remove leftover declarationRoi Dayan1-1/+0
This function was removed in the cited commit below. Fixes: 13e509a4c194 ("net/mlx5e: Remove leftover code from the PF netdev being uplink rep") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5e: Use ipv6_stub to avoid dependency with ipv6 being a moduleSaeed Mahameed3-12/+14
mlx5 is dependent on IPv6 tristate since we use ipv6's nd_tbl directly, alternatively we can use ipv6_stub->nd_tbl and remove the dependency. Reported-by: Walter Harms <wharms@bfs.de> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5: Kconfig: Fix MLX5_CORE dependency with PCI_HYPERV_INTERFACEMao Wenan1-0/+1
When MLX5_CORE=y and PCI_HYPERV_INTERFACE=m, below errors are found: drivers/net/ethernet/mellanox/mlx5/core/en_main.o: In function `mlx5e_nic_enable': en_main.c:(.text+0xb649): undefined reference to `mlx5e_hv_vhca_stats_create' drivers/net/ethernet/mellanox/mlx5/core/en_main.o: In function `mlx5e_nic_disable': en_main.c:(.text+0xb8c4): undefined reference to `mlx5e_hv_vhca_stats_destroy' Fix this by making MLX5_CORE imply PCI_HYPERV_INTERFACE. Fixes: cef35af34d6d ("net/mlx5e: Add mlx5e HV VHCA stats agent") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05net/mlx5e: Fix static checker warning of potential pointer math issueEran Ben Elisha1-5/+4
Cited patch have an issue in WARN_ON_ONCE check, with wrong address ranges are compared. Fix that by changing pointer types from u64* to void*. This will also make code simpler to read. In addition mlx5e_hv_vhca_fill_ring_stats can get void pointer, so remove the unnecessary casting when calling it. Found by static checker: drivers/net/ethernet/mellanox/mlx5/core/en/hv_vhca_stats.c:41 mlx5e_hv_vhca_fill_stats() warn: potential pointer math issue ('buf' is a u64 pointer) Fixes: cef35af34d6d ("net/mlx5e: Add mlx5e HV VHCA stats agent") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-05PCI: pciehp: Refer to "Indicators" instead of "LEDs" in commentsBjorn Helgaas2-3/+3
The PCIe spec doesn't mention "green LEDs" or "amber LEDs". Replace those terms with "Power Indicator" and "Attention Indicator" so the comments match the spec language. Comment changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05PCI: pciehp: Remove pciehp_green_led_{on,off,blink}()Denis Efremov3-43/+7
Remove pciehp_green_led_{on,off,blink}() and use pciehp_set_indicators() instead, since the code is mostly the same. [bhelgaas: drop set_power_indicator() wrapper to reduce the number of interfaces] Link: https://lore.kernel.org/r/20190903111021.1559-5-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-09-05PCI: pciehp: Remove pciehp_set_attention_status()Denis Efremov3-28/+7
Remove pciehp_set_attention_status() and use pciehp_set_indicators() instead, since the code is mostly the same. Link: https://lore.kernel.org/r/20190903111021.1559-4-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-09-05PCI: pciehp: Combine adjacent indicator updatesDenis Efremov2-13/+17
Combine adjacent updates of power and attention indicators into a single pciehp_set_indicators() call. This sends one command to the hotplug controller instead of two. Link: https://lore.kernel.org/r/20190903111021.1559-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2019-09-05PCI: pciehp: Add pciehp_set_indicators() to set both indicatorsDenis Efremov2-0/+39
Add pciehp_set_indicators() to set power and attention indicators with a single register write. This is a minor optimization because we frequently set both indicators and this can do it with a single command. It also reduces the number of interfaces related to the indicators and makes them more discoverable because callers use the PCI_EXP_SLTCTL_ATTN_IND_* and PCI_EXP_SLTCTL_PWR_IND_* definitions directly. [bhelgaas: extend commit log, s/PCI_EXP_SLTCTL_.*_IND_NONE/INDICATOR_NOOP/ so they don't look like things defined by the spec, add function doc, mask commands to make it obvious we only send valid commands (pcie_do_write_cmd() does mask it, but requires more effort to verify)] Link: https://lore.kernel.org/r/20190903111021.1559-2-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-05i2c: uniphier(-f): remove all dev_dbg()Masahiro Yamada2-36/+4
I have fixed various bugs, and these drivers are (I hope) pretty stable now. Remove all dev_dbg() for code clean-up. If I end up with debugging the drivers again, I will locally revert this commit. I no longer need the debug code in upstream. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-09-05i2c: uniphier(-f): use devm_platform_ioremap_resource()Masahiro Yamada2-6/+2
Replace the chain of platform_get_resource() and devm_ioremap_resource() with devm_platform_ioremap_resource(). This allows to remove the local variable for (struct resource *), and have one function call less. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-09-05led: triggers: Fix dereferencing of null pointerOleh Kravchenko1-2/+2
Error was detected by PVS-Studio: V522 Dereferencing of the null pointer 'led_cdev->trigger' might take place. Fixes: 2282e125a406 ("leds: triggers: let struct led_trigger::activate() return an error code") Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-09-05i2c: slave-eeprom: Add comment about address handlingBjörn Ardö1-0/+6
The behaviour of the EEPROM in the case where we only send an 8bit address to a 16bit address EEPROM is not defined. Added comment about that the slave-eeprom might behave differently from how an actual device does (only one model measured). Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Björn Ardö <bjorn.ardo@axis.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-09-05bus: ti-sysc: Fix handling of invalid clocksTony Lindgren1-4/+1
We can currently get "Unable to handle kernel paging request at virtual address" for invalid clocks with dts node but no driver: (__clk_get_hw) from [<c0138ebc>] (ti_sysc_find_one_clockdomain+0x18/0x34) (ti_sysc_find_one_clockdomain) from [<c0138f0c>] (ti_sysc_clkdm_init+0x34/0xdc) (ti_sysc_clkdm_init) from [<c0584660>] (sysc_probe+0xa50/0x10e8) (sysc_probe) from [<c065c6ac>] (platform_drv_probe+0x58/0xa8) Let's add IS_ERR checks to ti_sysc_clkdm_init() as And let's start treating clk_get() with -ENOENT as a proper error. If the clock name is specified in device tree we must succeed with clk_get() to continue. For modules with no clock names specified in device tree we will just ignore the clocks. Fixes: 2b2f7def058a ("bus: ti-sysc: Add support for missing clockdomain handling") Acked-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-05lightnvm: print error when target is not foundMinwoo Im1-1/+4
If userspace requests target to be removed, nvm_remove_tgt() will iterate the nvm_devices to find out the given target, but if not found, then it should print out an error. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Updated output string and patch description. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05lightnvm: introduce pr_fmt for the prefix nvmMinwoo Im1-24/+25
all the pr_() family can have this prefix by pr_fmt. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.