aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-09-05mt76: mt7615: remove wtbl_sec_key definitionLorenzo Bianconi1-14/+0
Get rid of wtbl_sec_key definition since it is no longer used Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: introduce mt7615_mac_wtbl_set_key routineLorenzo Bianconi6-48/+63
Add mt7615_mac_wtbl_set_key routine to configure wtbl key parameter directly from host cpu. This is a preliminary patch to add BIP_CMAC_128 hw support. Moreover add static qualifier to mt7615_mac_get_key_info routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: add mt7615_mac_wtbl_addr routineLorenzo Bianconi1-1/+6
Introduce mt7615_mac_wtbl_addr rouinte to compute sta wtbl address. This is a preliminary patch to update wtbl key directly from host processor Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: move mt7615_mac_get_key_info in mac.cLorenzo Bianconi4-49/+55
This is a preliminary patch to update wtbl key directly from host processor Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: add missing register initializationFelix Fietkau2-4/+31
- initialize CCA signal source - initialize clock for band 1 (7615D) - initialize BAR rate Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x0u: add support to TP-Link T2UHPLorenzo Bianconi1-0/+1
Introduce support to TP-Link T2UHP https://wikidevi.com/wiki/TP-LINK_Archer_T2UHP Tested-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: use params->ssn value directlyStanislaw Gruszka1-3/+3
There is no point to use pointer to params->ssn. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7603: use params->ssn value directlyStanislaw Gruszka1-3/+3
There is no point to use pointer to params->ssn. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76x02: use params->ssn value directlyStanislaw Gruszka1-3/+3
There is no point to use pointer to params->ssn. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: usb: remove unneeded {put,get}_unalignedStanislaw Gruszka2-5/+8
Compiler give us guarantees on variables alignment, so use an variable as buffer when read/write registers and remove unneeded {put,get}_unaligned. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: usb: fix endian in mt76u_copyStanislaw Gruszka1-2/+2
In contrast to mt76_wr() which we use to program registers, on mt76_wr_copy() we should not change endian of the data. Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7603: fix invalid fallback ratesFelix Fietkau1-0/+3
Only decrement the rate index on duplicate rates if it is not already 0 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: fix invalid fallback ratesFelix Fietkau1-0/+3
Only decrement the rate index on duplicate rates if it is not already 0 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: fix PS buffering of action framesFelix Fietkau1-1/+1
Bufferable management frames need to be put in the data queue, otherwise they will not be buffered when the receiver is asleep. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: fix using VHT STBC ratesFelix Fietkau1-6/+12
The hardware expects MT_TX_RATE_NSS to be filled with the number of space/time streams. For non-STBC rates, this is equal to nss. For 1-stream STBC, this needs to be set to 2. This is relevant for VHT rates only, on HT, the value is derived from MCS internally. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt76u: fix typo in mt76u_fill_rx_sgLorenzo Bianconi1-1/+1
Fix typo setting urb->transfer_buffer_length in mt76u_fill_rx_sg Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Fixes: f8f527b16db5 ("mt76: usb: use EP max packet aligned buffer sizes for rx") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: sync with mt7603 rate control changesFelix Fietkau4-44/+124
- Store the previous and current rate set in the driver + the TSF value at the time of the switch. - Use the tx status TSF value to determine which rate set needs to be used as reference. - Report only short or long GI rates for a single status event, not a mix. - The hardware reports the last used rate index. Use it along with the retry count to figure out what rate was used for the first attempt. - Use the same retry count value for all rate slots to make this calculation work. - Derive the probe rate from the current rateset instead of the skb cb - Do not wait for a status report for the probe frame before removing the probe rate from the rate table. Do it immediately after it was referenced in a tx status report. - Use the first half of the first rate retry budget for the probe rate in order to avoid using too many retries on that rate - Switch from lower rates to higher rates more conservatively - enable hardware rate up/down selection Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: reset rate index/counters on rate table updateFelix Fietkau2-1/+8
These values must be initialized to zero, otherwise the hardware could reuse previous values, especially the rate index Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: move mt7615_mcu_set_rates to mac.cFelix Fietkau4-98/+97
It bypasses the MCU, so it does not belong in mcu.c Also make mt7615_mac_tx_rate_val static Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7603: enable hardware rate up/down selectionFelix Fietkau1-2/+1
Improves performance by switching away from bad rates faster Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: introduce mt7615_mcu_send_ram_firmware routineLorenzo Bianconi1-48/+42
Add mt7615_mcu_send_ram_firmware routine since mt7615_load_ram runs the same code to send ram firmware to cr4 and n9 mcus. Moreover rename gen_dl_mode in mt7615_mcu_gen_dl_mode. This patch does not introduce any behaviour change, it is just code refactor. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: always release sem in mt7615_load_patchLorenzo Bianconi1-3/+3
Release patch semaphore even if request_firmware fails in mt7615_load_patch Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: fall back to sw encryption for unsupported ciphersLorenzo Bianconi1-0/+15
Fix following warning falling back to sw encryption for unsupported ciphers WARNING: CPU: 2 PID: 1495 at backports-4.19.32-1/net/mac80211/key.c:1023 mt76_wcid_key_setup+0x68/0xbc [mt76] CPU: 2 PID: 1495 Comm: hostapd Not tainted 4.14.131 #0 Stack : 00000000 8f0f8bc0 00000000 8007ccec 805f0000 8058ec18 00000000 00000000 80559788 8dca79bc 8fefb10c 805c89c7 805545c8 00000001 8dca7960 53261662 00000000 00000000 80640000 00004668 00000000 000000e9 00000007 00000000 00000000 805d0000 00072537 00000000 80000000 00000000 805f0000 8f1e70d0 8e8fa098 000003ff 805c0000 8f0f8bc0 00000001 802d4340 00000008 80630008 [<800108d0>] show_stack+0x58/0x100 [<8049214c>] dump_stack+0x9c/0xe0 [<80033998>] __warn+0xe0/0x138 [<80033a80>] warn_slowpath_null+0x1c/0x2c [<8e8fa098>] mt76_wcid_key_setup+0x68/0xbc [mt76] [<8e889930>] mt7615_eeprom_init+0x7c0/0xe14 [mt7615e] Suggested-by: Sebastian Gottschall <s.gottschall@newmedia-net.de> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: clean up FWDL TXQ during/after firmware uploadFelix Fietkau1-0/+3
Since we don't clean that tx queue from the tx tasklet, we need to do it after the firmware upload is done. This patch also adds a cleanup step during the upload, to help reclaim memory faster. Fixes unprocessed queued frames eating up memory long after the firmware upload has already completed Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: add radar pattern test knob to debugfsLorenzo Bianconi6-14/+81
Introduce mt7615_mcu_rdd_send_pattern routine to trigger a radar pattern detection. Moreover move debugfs related routines in a dedicated source file. Suggested-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: add csa supportLorenzo Bianconi4-5/+36
Add Channel Switch Announcement support to mt7615 driver updating beacon template with CSA IE received from mac80211 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: do not perform txcalibration before cac is complitedLorenzo Bianconi1-10/+15
Delay channel calibration after Channel Availability Check. Add some code cleanup to mt7615_mcu_set_channel Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: add hw dfs pattern detector supportLorenzo Bianconi7-1/+245
Add hw radar detection support to mt7615 driver in order to unlock dfs channels on 5GHz band Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: introduce mt7615_regd_notifierLorenzo Bianconi1-0/+11
Introduce mt7615_regd_notifier callback. This is a preliminary patch to add radar detection support to mt7615 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: mt7615: fix sparse warnings: warning: restricted __le16 degrades to integerLorenzo Bianconi1-1/+1
Fix the following sparse warning in __mt7615_mcu_msg_send: drivers/net/wireless/mediatek/mt76/mt7615/mcu.c:78:15: sparse: warning: restricted __le16 degrades to integer drivers/net/wireless/mediatek/mt76/mt7615/mcu.c:78:15: sparse: warning: cast from restricted __le16 Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05mt76: round up length on mt76_wr_copyFelix Fietkau2-2/+2
When beacon length is not a multiple of 4, the beacon could be sent with the last 1-3 bytes corrupted. The skb data is guaranteed to have enough room for reading beyond the end, because it is always followed by skb_shared_info, so rounding up is safe. All other callers of mt76_wr_copy have multiple-of-4 length already. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-09-05Bluetooth: btusb: Use cmd_timeout to reset Realtek deviceAlex Lu1-0/+31
Realtek Bluetooth controller provides a BT_DIS reset pin for hardware reset of it. The cmd_timeout is helpful on Realtek bluetooth controller where the firmware gets stuck. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Fix an issue that failing to download the FW which size is over 32K bytesMax Chou1-1/+5
Fix the issue that when the FW size is 32K+, it will fail for the download process because of the incorrect index. When firmware patch length is over 32K, "dl_cmd->index" may >= 0x80. It will be thought as "data end" that download process will not complete. However, driver should recount the index from 1. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Remove trailing newline from calls to rtl_dev macrosAlex Lu1-28/+28
These printing macros already add a trailing newline, so drop these unnecessary additional newlines. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Remove redundant prefix from calls to rtl_dev macrosAlex Lu1-6/+6
the rtl: or RTL: prefix in the string is pointless. The rtl_dev_* macros already does that. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Add firmware version printAlex Lu1-21/+35
This patch is used to print fw version for debug convenience Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btrtl: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERYAlex Lu1-0/+5
Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: hci_qca: wait for Pre shutdown complete event before sending the Power off pulseHarish Bandi2-2/+5
When SoC receives pre shut down command, it share the same with other COEX shared clients. So SoC needs a short time after sending VS pre shutdown command before turning off the regulators and sending the power off pulse. Along with short delay, needs to wait for command complete event for Pre shutdown VS command Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05bluetooth: hci_bcm: Give more time to come out of resetOndrej Jirman1-1/+1
Some supported devices need more time to come out of reset (eg. BCM4345C5 in AP6256). I don't have/found a datasheet, so the value was arrive at experimentally with the Oprange Pi 3 board. Without increased delay, I got intermittent failures during probe. This is a Bluetooth 5.0 device, so maybe that's why it takes longer to initialize than the others. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05bluetooth: bcm: Add support for loading firmware for BCM4345C5Ondrej Jirman2-0/+4
Detect BCM4345C5 and load a corresponding firmware file. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: hci_qca: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for QCA UART RadioRocky Liao1-0/+5
QCA UART Bluetooth controllers can do both LE scan and BR/EDR inquiry at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk. Signed-off-by: Rocky Liao <rjliao@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: hci_qca: Make structure qca_proto constantNishka Dasgupta1-1/+1
Static structure qca_proto, of type hci_uart_proto, is used four times: as the last argument in function hci_uart_register_device(), and as the only argument to functions hci_uart_register_proto() and hci_uart_unregister_proto(). In all three of these functions, the parameter corresponding to qca_proto is declared as constant. Therefore, make qca_proto itself constant as well in order to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: btusb: Fix suspend issue for Realtek devicesAlex Lu1-4/+30
From the perspective of controller, global suspend means there is no SET_FEATURE (DEVICE_REMOTE_WAKEUP) and controller would drop the firmware. It would consume less power. So we should not send this kind of SET_FEATURE when host goes to suspend state. Otherwise, when making device enter selective suspend, host should send SET_FEATURE to make sure the firmware remains. Signed-off-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: hci_bcm: Fix -Wunused-const-variable warningsYueHaibing1-15/+15
If CONFIG_ACPI is not set, gcc warn this: drivers/bluetooth/hci_bcm.c:831:39: warning: acpi_bcm_int_last_gpios defined but not used [-Wunused-const-variable=] drivers/bluetooth/hci_bcm.c:838:39: warning: acpi_bcm_int_first_gpios defined but not used [-Wunused-const-variable=] move them to #ifdef CONFIG_ACPI block. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: hci_qca: Remove redundant initializations to zeroMatthias Kaehlcke1-19/+0
The qca_data structure is allocated with kzalloc() and hence zero-initialized. Remove a bunch of unnecessary explicit initializations of struct members to zero. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05ice: Rework around device/function capabilitiesAnirudh Venkataramanan1-20/+20
ice_parse_caps is printing capabilities in a different way when compared to the variable names. This makes it difficult to search for the right strings in the debug logs. So this patch updates the print strings to be exactly the same as the fields' name in the structure. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-05ice: change default number of receive descriptorsJesse Brandeburg1-17/+2
The driver should start out with a reasonable number of descriptors that can prevent drops due to a CPU being in a power management state. Change the default number of descriptors to 2048. The user can always change the value at runtime. Transmit descriptor counts are not modified because they don't need to change due to the speed of the interface, or for power managed CPUs, but the code is simplified to a fixed value for the transmit default. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-05ice: Minor refactor in queue managementAnirudh Venkataramanan4-39/+54
Remove q_left_tx and q_left_rx from the PF struct as these can be obtained by calling ice_get_avail_txq_count and ice_get_avail_rxq_count respectively. The function ice_determine_q_usage is only setting num_lan_tx and num_lan_rx in the PF structure, and these are later assigned to vsi->alloc_txq and vsi->alloc_rxq respectively. This is an unnecessary indirection, so remove ice_determine_q_usage and just assign values for vsi->alloc_txq and vsi->alloc_rxq in ice_vsi_set_num_qs and use these to set num_lan_tx and num_lan_rx respectively. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-05ice: Allow for delayed LLDP MIB change registrationDave Ertman5-15/+51
Add an additional boolean parameter to the ice_init_dcb function. This boolean controls if the LLDP MIB change events are registered for. Also, add a new function defined ice_cfg_lldp_mib_change. The additional function is necessary to be able to register for LLDP MIB change events after calling ice_init_dcb. The net effect of these two changes is to allow a delayed registration for MIB change events so that the driver is not accepting events before it is ready for them. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-05ice: update Tx context structAshish Shah2-1/+3
Add internal usage flag, bit 91 as described in spec. Update width of internal queue state to 122 also as described in spec. Signed-off-by: Ashish Shah <ashish.n.shah@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.