aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-24enetc: add get_ts_info interface for ethtoolY.b. Lu3-0/+39
This patch is to add get_ts_info interface for ethtool to support getting timestamping capability. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-24enetc: add hardware timestamping supportY.b. Lu6-6/+189
This patch is to add hardware timestamping support for ENETC. On Rx, timestamping is enabled for all frames. On Tx, we only instruct the hardware to timestamp the frames marked accordingly by the stack. Because the RX BD ring dynamic allocation has not been supported and it is too expensive to use extended RX BDs if timestamping is not used, a Kconfig option is used to enable extended RX BDs in order to support hardware timestamping. This option will be removed once RX BD ring dynamic allocation is implemented. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Fix compile errorEsben Haabendal1-2/+1
Fixes: 1b3fa5cf859b ("net: ll_temac: Cleanup multicast filter on change") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller14-234/+400
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-05-23 This series contains updates to ice driver only. Anirudh cleans up white space issues and other code formatting issues in the driver. Also implemented LLDP persistence across reboots and start/stop of the LLDP agent. Updated print statements for driver capabilities to include if it is a device or function capability. Bruce cleaned up variable declarations by removing unneeded assignment. Dave fixes a potential hang due to a couple of flows that recursively acquire the RTNL lock which results in a deadlock. Tony updates the driver to advertise what link modes we are capable of when the user does not request a specific link mode. Usha fixes up the LLDP MIB change event handling by cleaning up workarounds and print the DCB configuration changes detected. Brett fixes the driver to handle failures in the VF reset path, which was failing to free resources upon an error. Richard fixed the reported of stats via ethtool to align with our other Intel drivers. Jesse optimizes the transmit buffer and ring structures to have more efficient ordering to get hot cache lines to have packed data. Also optimized the VF structure to use less memory, since it is used hundreds of times throughout the driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23ice: Silence semantic parser warningsBruce Allan2-4/+4
Recent versions of sparse warn about casting pointers to/from restricted endian types in the Linux driver. Silence those with the compiler attribute __force macro from the Linux kernel to force casts to/from restricted endian types. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Fix couple of issues in ice_vsi_releaseBrett Creeley3-13/+14
Currently the driver is calling ice_napi_del() and then unregister_netdev(). The call to unregister_netdev() will result in a call to ice_stop() and then ice_vsi_close(). This is where we call napi_disable() for all the MSI-X vectors. This flow is reversed so make the changes to ensure napi_disable() happens prior to napi_del(). Before calling napi_del() and free_netdev() make sure unregister_netdev() was called. This is done by making sure the __ICE_DOWN bit is set in the vsi->state for the interested VSI. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Reorganize ice_vf structJesse Brandeburg1-8/+13
The ice_vf struct can be used hundreds of times in our driver so it pays to use less memory per struct. ice_vf prior to this commit: /* size: 112, cachelines: 2, members: 25 */ /* sum members: 101, holes: 4, sum holes: 8 */ /* bit holes: 2, sum bit holes: 11 bits */ /* padding: 3 */ /* last cacheline: 48 bytes */ ice_vf after this commit: /* size: 104, cachelines: 2, members: 25 */ /* sum members: 100, holes: 3, sum holes: 4 */ /* bit holes: 1, sum bit holes: 3 bits */ /* last cacheline: 40 bytes */ Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Use bitfields when possibleJesse Brandeburg3-11/+11
We can use bit fields to store boolean values and when the bit fields are next to each other, the compiler will combine them (as long as the size holds enough). Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Reorganize tx_buf and ring structsJesse Brandeburg1-14/+21
Use more efficient structure ordering by using the pahole tool and a lot of code inspection to get hot cache lines to have packed data (no holes if possible) and adjacent warm data. ice_ring prior to this change: /* size: 192, cachelines: 3, members: 23 */ /* sum members: 158, holes: 4, sum holes: 12 */ /* padding: 22 */ ice_ring after this change: /* size: 192, cachelines: 3, members: 25 */ /* sum members: 162, holes: 1, sum holes: 1 */ /* padding: 29 */ ice_tx_buf prior to this change: /* size: 48, cachelines: 1, members: 7 */ /* sum members: 38, holes: 2, sum holes: 6 */ /* padding: 4 */ /* last cacheline: 48 bytes */ ice_tx_buf after this change: /* size: 40, cachelines: 1, members: 7 */ /* sum members: 38, holes: 1, sum holes: 2 */ /* last cacheline: 40 bytes */ Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Format ethtool reported statsRichard Rodriguez1-54/+54
Fixes ethtool -S reported stats in ice driver to match format and nomenclature of the ixgbe driver. Signed-off-by: Richard Rodriguez <richard.rodriguez@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Gracefully handle reset failure in ice_alloc_vfs()Brett Creeley1-2/+9
Currently if ice_reset_all_vfs() fails in ice_alloc_vfs() we fail to free some resources, reset variables, and return an error value. Fix this by adding another unroll case to free the pf->vf array, set the pf->num_alloc_vfs to 0, and return an error code. Without this, if ice_reset_all_vfs() fails in ice_alloc_vfs() we will not be able to do SRIOV without hard rebooting the system because rmmod'ing the driver does not work. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Refactor the LLDP MIB change event handlingUsha Ketineni3-22/+140
This patch fixes the LLDP MIB change event handling code by removing the workarounds in the current code. Added ice_dcb_need_recfg() to print the DCB configuration changes detected via MIB change event. Signed-off-by: Usha Ketineni <usha.k.ketineni@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Advertise supported link modes if none requestedTony Nguyen1-25/+50
User requested link modes affect what is returned as an advertised link mode. If no modes have been requested, we are not advertising any link modes. Advertise what we are capable of supporting if no link modes have been requested. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Fix hang when ethtool disables FW LLDPDave Ertman4-17/+25
When disabling and enabling VSIs, there are a couple of flows that recursively acquire the RTNL lock which causes a deadlock. Fix that. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Call out dev/func caps when printingAnirudh Venkataramanan1-26/+30
ice_parse_caps is used to parse both device and function capabilities. Currently, capabilities are printed with a cryptic "HW caps" prefix, which makes it difficult to distinguish whether the capabilities being printed are device or function capabilities. This patch makes a change to add a "func cap" prefix when printing function capabilities, and a "dev cap" prefix when printing device capabilities. This patch also changes some of the capability print strings for consistency. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Remove braces for single statement blocksAnirudh Venkataramanan1-2/+1
Fix checkpatch warning "WARNING:BRACES: braces {} are not necessary for single statement blocks" Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Cleanup an unnecessary variable initializationBruce Allan1-3/+3
Commit 3463688e6ced ("ice: Add more validation in ice_vc_cfg_irq_map_msg") added an assignment of vsi making the assignment during declaration unnecessary. Also, cleanup the declaration and assignment of irqmap_info to not use two lines in the variable declaration section. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Implement LLDP persistenceAnirudh Venkataramanan5-37/+29
Implement LLDP persistence across reboots, start and stop of LLDP agent. Add additional parameter to ice_aq_start_lldp and ice_aq_stop_lldp. Also change the ethtool private flag from "disable-fw-lldp" to "enable-fw-lldp". This change will flip the boolean logic of the functionality of the flag (on = enable, off = disable). The change in name and functionality is to differentiate between the pre-persistence and post-persistence states. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23ice: Fix double spacingAnirudh Venkataramanan1-1/+1
Fix double spacing in ice_napi_disable_all Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-23net: qualcomm: rmnet: Move common struct definitions to includeSubash Abhinov Kasiviswanathan1-24/+1
Create if_rmnet.h and move the rmnet MAP packet structs to this common include file. To account for portablity, add little and big endian bitfield definitions similar to the ip & tcp headers. The definitions in the headers can now be re-used by the upcoming ipa driver series as well as qmi_wwan. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23Revert "dpaa2-eth: configure the cache stashing amount on a queue"Ioana Radulescu1-6/+1
This reverts commit f8b995853444aba9c16c1ccdccdd397527fde96d. The reverted change instructed the QMan hardware block to fetch RX frame annotation and beginning of frame data to cache before the core would read them. It turns out that in rare cases, it's possible that a QMan stashing transaction is delayed long enough such that, by the time it gets executed, the frame in question had already been dequeued by the core and software processing began on it. If the core manages to unmap the frame buffer _before_ the stashing transaction is executed, an SMMU exception will be raised. Unfortunately there is no easy way to work around this while keeping the performance advantages brought by QMan stashing, so disable it altogether. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23cxgb4: use firmware API for validating filter specRaju Rangoju4-6/+68
Adds support for validating hardware filter spec configured in firmware before offloading exact match flows. Use the new fw api FW_PARAM_DEV_FILTER_MODE_MASK to read the filter mode and mask from firmware. If the api isn't supported, then fall-back to older way of reading just the mode from indirect register. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Enable multicast supportEsben Haabendal1-2/+1
Multicast support have been tested and is working now. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Cleanup multicast filter on changeEsben Haabendal1-2/+5
Avoid leaving old address table entries when using multicast. If more than one multicast address were removed, only the first removed address would actually be cleared. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Prepare indirect register access for multicast supportEsben Haabendal3-88/+177
With .ndo_set_rx_mode/temac_set_multicast_list() being called in atomic context (holding addr_list_lock), and temac_set_multicast_list() needing to access temac indirect registers, the mutex used to synchronize indirect register is a no-no. Replace it with a spinlock, and avoid sleeping in temac_indirect_busywait(). To avoid excessive holding of the lock, which is now a spinlock, the temac_device_reset() function is changed to only hold the lock for short periods. With timeouts, it could be holding the spinlock for more than 2 seconds. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Do not make promiscuous mode sticky on multicastEsben Haabendal1-7/+0
When user has requested IFF_ALLMULTI or have set more than 4 multicast addresses, we should just use promiscuous mode, but not set it in flags, as it causes the interface to stay in promiscuous mode even when the non-IFF_PROMISC condition that caused promiscuous mode to be enabled has gone away. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: phy: lxt: Add suspend/resume support to LXT971 and LXT973.Christophe Leroy1-0/+6
All LXT PHYs implement the standard "power down" bit 11 of BMCR, so this patch adds support using the generic genphy_{suspend,resume} functions added by commit 0f0ca340e57b ("phy: power management support"). LXT970 is left aside because all registers get cleared upon "power down" exit. Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: Make phy_basic_t1_features use base100t1.Andrew Lunn1-1/+1
Now that there is a link mode for 100BaseT1, use it in phy_basic_t1_features so T1 PHY drivers will indicate this mode via the Ethtool API. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: Add support for 100BaseT1 and 1000BaseT1Andrew Lunn1-1/+3
Add link modes for 100Mbps and 1Gbps over a single pair. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: dp83867: Allocate state struct in probeTrent Piepho1-14/+19
This was being done in config the first time the phy was configured. Should be in the probe method. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: dp83867: Validate FIFO depth propertyTrent Piepho1-2/+15
Insure property is in valid range and fail when reading DT if it is not. Also add error message for existing failure if required property is not present. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: dp83867: IO impedance is not dependent on RGMII delayTrent Piepho1-10/+9
The driver would only set the IO impedance value when RGMII internal delays were enabled. There is no reason for this. Move the IO impedance block out of the RGMII delay block. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: dp83867: Use unsigned variables to store unsigned propertiesTrent Piepho1-3/+3
The variables used to store u32 DT properties were signed ints. This doesn't work properly if the value of the property were to overflow. Use unsigned variables so this doesn't happen. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: dp83867: Rework delay rgmii delay handlingTrent Piepho1-12/+66
The code was assuming the reset default of the delay control register was to have delay disabled. This is what the datasheet shows as the register's initial value. However, that's not actually true: the default is controlled by the PHY's pin strapping. If the interface mode is selected as RX or TX delay only, insure the other direction's delay is disabled. If the interface mode is just "rgmii", with neither TX or RX internal delay, one might expect that the driver should disable both delays. But this is not what the driver does. It leaves the setting at the PHY's strapping's default. And that default, for no pins with strapping resistors, is to have delay enabled and 2.00 ns. Rather than change this behavior, I've kept it the same and documented it. No delay will most likely not work and will break ethernet on any board using "rgmii" mode. If the board is strapped to have a delay and is configured to use "rgmii" mode a warning is generated that "rgmii-id" should have been used. Also validate the delay values and fail if they are not in range. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: phy: dp83867: Add ability to disable output clockTrent Piepho1-9/+28
Generally, the output clock pin is only used for testing and only serves as a source of RF noise after this. It could be used to daisy-chain PHYs, but this is uncommon. Since the PHY can disable the output, make doing so an option. I do this by adding another enumeration to the allowed values of ti,clk-output-sel. The code was not using the value DP83867_CLK_O_SEL_REF_CLK as one might expect: to select the REF_CLK as the output. Rather it meant "keep clock output setting as is", which, depending on PHY strapping, might not be outputting REF_CLK. Change this so DP83867_CLK_O_SEL_REF_CLK means enable REF_CLK output. Omitting the property will leave the setting as is (which was the previous behavior in this case). Out of range values were silently converted into DP83867_CLK_O_SEL_REF_CLK. Change this so they generate an error. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22cxgb4: Enable hash filter with offloadVishal Kulkarni8-22/+110
Hash (exact-match) filters used for offloading flows share the same active region resources on the chip with upper layer drivers, like iw_cxgb4, chcr, etc. Currently, only either Hash filters or ULDs can use the active region resources, but not both. Hence, use the new firmware configuration parameters (when available) to allow both the Hash filters and ULDs to share the active region simultaneously. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22net: fec: remove redundant ipg clock disableBaruch Siach1-1/+0
Don't disable the ipg clock in the regulator error path. The clock is disable unconditionally two lines below the failed_regulator label. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds1-9/+1
Pull arm64 fixes from Will Deacon: - Fix SPE probe failure when backing auxbuf with high-order pages - Fix handling of DMA allocations from outside of the vmalloc area - Fix generation of build-id ELF section for vDSO object - Disable huge I/O mappings if kernel page table dumping is enabled - A few other minor fixes (comments, kconfig etc) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: vdso: Explicitly add build-id option arm64/mm: Inhibit huge-vmap with ptdump arm64: Print physical address of page table base in show_pte() arm64: don't trash config with compat symbol if COMPAT is disabled arm64: assembler: Update comment above cond_yield_neon() macro drivers/perf: arm_spe: Don't error on high-order pages for aux buf arm64/iommu: handle non-remapped addresses in ->mmap and ->get_sgtable
2019-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds12-57/+52
Pull networking fixes from David Miller: 1) Clear up some recent tipc regressions because of registration ordering. Fix from Junwei Hu. 2) tipc's TLV_SET() can read past the end of the supplied buffer during the copy. From Chris Packham. 3) ptp example program doesn't match the kernel, from Richard Cochran. 4) Outgoing message type fix in qrtr, from Bjorn Andersson. 5) Flow control regression in stmmac, from Tan Tee Min. 6) Fix inband autonegotiation in phylink, from Russell King. 7) Fix sk_bound_dev_if handling in rawv6_bind(), from Mike Manning. 8) Fix usbnet crash after disconnect, from Kloetzke Jan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) usbnet: fix kernel crash after disconnect selftests: fib_rule_tests: use pre-defined DEV_ADDR net-next: net: Fix typos in ip-sysctl.txt ipv6: Consider sk_bound_dev_if when binding a raw socket to an address net: phylink: ensure inband AN works correctly usbnet: ipheth: fix racing condition net: stmmac: dma channel control register need to be init first net: stmmac: fix ethtool flow control not able to get/set net: qrtr: Fix message type of outgoing packets networking: : fix typos in code comments ptp: Fix example program to match kernel. fddi: fix typos in code comments selftests: fib_rule_tests: enable forwarding before ipv4 from/iif test selftests: fib_rule_tests: fix local IPv4 address typo tipc: Avoid copying bytes beyond the supplied data 2/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait function 1/2] net: axienet: use readx_poll_timeout() in mdio wait function vlan: Mark expected switch fall-through macvlan: Mark expected switch fall-through net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query ...
2019-05-22Merge tag 'for-5.2/dm-fix-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds1-1/+3
Pull device mapper fix from Mike Snitzer: "Fix a particularly glaring oversight in a DM core commit from 5.1 that doesn't properly trim special IOs (e.g. discards) relative to corresponding target's max_io_len_target_boundary()" * tag 'for-5.2/dm-fix-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: make sure to obey max_io_len_target_boundary
2019-05-21dm: make sure to obey max_io_len_target_boundaryMichael Lass1-1/+3
Commit 61697a6abd24 ("dm: eliminate 'split_discard_bios' flag from DM target interface") incorrectly removed code from __send_changing_extent_only() that is required to impose a per-target IO boundary on IO that exceeds max_io_len_target_boundary(). Otherwise "special" IO (e.g. DISCARD, WRITE SAME, WRITE ZEROES) can write beyond where allowed. Fix this by restoring the max_io_len_target_boundary() limit in __send_changing_extent_only() Fixes: 61697a6abd24 ("dm: eliminate 'split_discard_bios' flag from DM target interface") Cc: stable@vger.kernel.org # 5.1+ Signed-off-by: Michael Lass <bevan@bi-co.net> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-21usbnet: fix kernel crash after disconnectKloetzke Jan1-0/+6
When disconnecting cdc_ncm the kernel sporadically crashes shortly after the disconnect: [ 57.868812] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 58.006653] PC is at 0x0 [ 58.009202] LR is at call_timer_fn+0xec/0x1b4 [ 58.013567] pc : [<0000000000000000>] lr : [<ffffff80080f5130>] pstate: 00000145 [ 58.020976] sp : ffffff8008003da0 [ 58.024295] x29: ffffff8008003da0 x28: 0000000000000001 [ 58.029618] x27: 000000000000000a x26: 0000000000000100 [ 58.034941] x25: 0000000000000000 x24: ffffff8008003e68 [ 58.040263] x23: 0000000000000000 x22: 0000000000000000 [ 58.045587] x21: 0000000000000000 x20: ffffffc68fac1808 [ 58.050910] x19: 0000000000000100 x18: 0000000000000000 [ 58.056232] x17: 0000007f885aff8c x16: 0000007f883a9f10 [ 58.061556] x15: 0000000000000001 x14: 000000000000006e [ 58.066878] x13: 0000000000000000 x12: 00000000000000ba [ 58.072201] x11: ffffffc69ff1db30 x10: 0000000000000020 [ 58.077524] x9 : 8000100008001000 x8 : 0000000000000001 [ 58.082847] x7 : 0000000000000800 x6 : ffffff8008003e70 [ 58.088169] x5 : ffffffc69ff17a28 x4 : 00000000ffff138b [ 58.093492] x3 : 0000000000000000 x2 : 0000000000000000 [ 58.098814] x1 : 0000000000000000 x0 : 0000000000000000 ... [ 58.205800] [< (null)>] (null) [ 58.210521] [<ffffff80080f5298>] expire_timers+0xa0/0x14c [ 58.215937] [<ffffff80080f542c>] run_timer_softirq+0xe8/0x128 [ 58.221702] [<ffffff8008081120>] __do_softirq+0x298/0x348 [ 58.227118] [<ffffff80080a6304>] irq_exit+0x74/0xbc [ 58.232009] [<ffffff80080e17dc>] __handle_domain_irq+0x78/0xac [ 58.237857] [<ffffff8008080cf4>] gic_handle_irq+0x80/0xac ... The crash happens roughly 125..130ms after the disconnect. This correlates with the 'delay' timer that is started on certain USB tx/rx errors in the URB completion handler. The problem is a race of usbnet_stop() with usbnet_start_xmit(). In usbnet_stop() we call usbnet_terminate_urbs() to cancel all URBs in flight. This only makes sense if no new URBs are submitted concurrently, though. But the usbnet_start_xmit() can run at the same time on another CPU which almost unconditionally submits an URB. The error callback of the new URB will then schedule the timer after it was already stopped. The fix adds a check if the tx queue is stopped after the tx list lock has been taken. This should reliably prevent the submission of new URBs while usbnet_terminate_urbs() does its job. The same thing is done on the rx side even though it might be safe due to other flags that are checked there. Signed-off-by: Jan Klötzke <Jan.Kloetzke@preh.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21net: phylink: ensure inband AN works correctlyRussell King1-22/+15
Do not update the link interface mode while the link is down to avoid spurious link interface changes. Always call mac_config if we have a PHY to propagate the pause mode settings to the MAC. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21usbnet: ipheth: fix racing conditionBernd Eckstein1-1/+2
Fix a racing condition in ipheth.c that can lead to slow performance. Bug: In ipheth_tx(), netif_wake_queue() may be called on the callback ipheth_sndbulk_callback(), _before_ netif_stop_queue() is called. When this happens, the queue is stopped longer than it needs to be, thus reducing network performance. Fix: Move netif_stop_queue() in front of usb_submit_urb(). Now the order is always correct. In case, usb_submit_urb() fails, the queue is woken up again as callback will not fire. Testing: This racing condition is usually not noticeable, as it has to occur very frequently to slowdown the network. The callback from the USB is usually triggered slow enough, so the situation does not appear. However, on a Ubuntu Linux on VMWare Workstation, running on Windows 10, the we loose the race quite often and the following speedup can be noticed: Without this patch: Download: 4.10 Mbit/s, Upload: 4.01 Mbit/s With this patch: Download: 36.23 Mbit/s, Upload: 17.61 Mbit/s Signed-off-by: Oliver Zweigle <Oliver.Zweigle@faro.com> Signed-off-by: Bernd Eckstein <3ernd.Eckstein@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds2198-6184/+2198
Pull SPDX update from Greg KH: "Here is a series of patches that add SPDX tags to different kernel files, based on two different things: - SPDX entries are added to a bunch of files that we missed a year ago that do not have any license information at all. These were either missed because the tool saw the MODULE_LICENSE() tag, or some EXPORT_SYMBOL tags, and got confused and thought the file had a real license, or the files have been added since the last big sweep, or they were Makefile/Kconfig files, which we didn't touch last time. - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan tools can determine the license text in the file itself. Where this happens, the license text is removed, in order to cut down on the 700+ different ways we have in the kernel today, in a quest to get rid of all of these. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers. The reason for these "large" patches is if we were to continue to progress at the current rate of change in the kernel, adding license tags to individual files in different subsystems, we would be finished in about 10 years at the earliest. There will be more series of these types of patches coming over the next few weeks as the tools and reviewers crunch through the more "odd" variants of how to say "GPLv2" that developers have come up with over the years, combined with other fun oddities (GPL + a BSD disclaimer?) that are being unearthed, with the goal for the whole kernel to be cleaned up. These diffstats are not small, 3840 files are touched, over 10k lines removed in just 24 patches" * tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3 ...
2019-05-21Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds3-127/+88
Pull crypto fixes from Herbert Xu: - Two long-standing bugs in the powerpc assembly of vmx - Stack overrun caused by HASH_MAX_DESCSIZE being too small - Regression in caam * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: vmx - ghash: do nosimd fallback manually crypto: vmx - CTR: always increment IV as quadword crypto: hash - fix incorrect HASH_MAX_DESCSIZE crypto: caam - fix typo in i.MX6 devices list for errata
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24Thomas Gleixner44-446/+44
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 50 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.917228456@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23Thomas Gleixner2-21/+2
Based on 1 normalized pattern(s): this software may be redistributed and or modified under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.800979546@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): the code contained herein is licensed under the gnu general public license you may obtain a copy of the gnu general public license version 2 or later at the following locations extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 4 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.707528683@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21Thomas Gleixner2-27/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 2 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154042.615184352@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.