aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-04-19net: phy: mdio-gpio: Move allocation for bitbanging dataAndrew Lunn1-6/+7
Moving the allocation of this structure to the probe function is a step towards making it the core data structure of the driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: phy: mdio-gpio: Swap to using gpio descriptorsAndrew Lunn1-56/+17
This simplifies the code, removing the need to handle active low flags, etc. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: phy: mdio-gpio: Remove support for IRQs in platform dataAndrew Lunn1-7/+0
No current devices use IRQs in platform data, so remove support for it. The MDIO core will also initialise the new bus such that all addresses are polled, so remove the unneeded re-initialisation. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: phy: mdio-gpio: remove support for phy maskAndrew Lunn1-4/+0
This is not needed any more by devices using platform data, so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: phy: mdio-gpio: remove support for ignoring turn aroundAndrew Lunn1-1/+0
This is not needed any more by devices using platform data, so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: phy: mdio-bitbang: Remove reset supportAndrew Lunn1-9/+0
The mdio-gpio driver was the only user of the interface reset option. Since it no longer uses it, remove it from the bit banging code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: phy: mdio-gpio: Remove reset functionAndrew Lunn1-1/+0
The platform data can contain a function to call to reset the bit banging interface. It is not used, so remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: phy_ mdio-gpio: Fixup , which should be ;Andrew Lunn1-1/+1
Seems like an old typ0. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Rename fib6_info struct elementsDavid Ahern1-28/+28
Change the prefix for fib6_info struct elements from rt6i_ to fib6_. rt6i_pcpu and rt6i_exception_bucket are left as is given that they point to rt6_info entries. Rename only; not functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19vmxnet3: fix incorrect dereference when rxvlan is disabledRonak Doshi2-6/+15
vmxnet3_get_hdr_len() is used to calculate the header length which in turn is used to calculate the gso_size for skb. When rxvlan offload is disabled, vlan tag is present in the header and the function references ip header from sizeof(ethhdr) and leads to incorrect pointer reference. This patch fixes this issue by taking sizeof(vlan_ethhdr) into account if vlan tag is present and correctly references the ip hdr. Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Acked-by: Louis Luo <llouis@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit"Colin Ian King1-2/+2
Trivial fix to spelling mistake in message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: qmi_wwan: add Wistron Neweb D19Q1Pawel Dembicki1-0/+1
This modem is embedded on dlink dwr-960 router. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=d191 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net-next/hinic: add arm64 supportZhao Chen1-1/+1
This patch enables arm64 platform support for the HINIC driver. Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: stmmac: Disable ACS Feature for GMAC >= 4Jose Abreu3-9/+7
ACS Feature is currently enabled for GMAC >= 4 but the llc_snap status is never checked in descriptor rx_status callback. This will cause stmmac to always strip packets even that ACS feature is already stripping them. Lets be safe and disable the ACS feature for GMAC >= 4 and always strip the packets for this GMAC version. Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: mvpp2: Fix DMA address mask sizeMaxime Chevallier1-5/+7
PPv2 TX/RX descriptors uses 40bits DMA addresses, but 41 bits masks were used (GENMASK_ULL(40, 0)). This commit fixes that by using the correct mask. Fixes: e7c5359f2eed ("net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCsWolfram Sang1-6/+33
Early revisions of certain SoCs cannot do multiple DMA RX streams in parallel. To avoid data corruption, only allow one DMA RX channel and fall back to PIO, if needed. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-04-19HID: i2c-hid: fix inverted return value from i2c_hid_command()Jiri Kosina1-1/+1
i2c_hid_command() returns non-zero in error cases (the actual errno). Error handling in for I2C_HID_QUIRK_RESEND_REPORT_DESCR case in i2c_hid_resume() had the check inverted; fix that. Fixes: 3e83eda467 ("HID: i2c-hid: Fix resume issue on Raydium touchscreen device") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-04-18net: qualcomm: rmnet: Fix warning seen with fill_infoSubash Abhinov Kasiviswanathan1-5/+6
When the last rmnet device attached to a real device is removed, the real device is unregistered from rmnet. As a result, the real device lookup fails resulting in a warning when the fill_info handler is called as part of the rmnet device unregistration. Fix this by returning the rmnet flags as 0 when no real device is present. WARNING: CPU: 0 PID: 1779 at net/core/rtnetlink.c:3254 rtmsg_ifinfo_build_skb+0xca/0x10d Modules linked in: CPU: 0 PID: 1779 Comm: ip Not tainted 4.16.0-11872-g7ce2367 #1 Stack: 7fe655f0 60371ea3 00000000 00000000 60282bc6 6006b116 7fe65600 60371ee8 7fe65660 6003a68c 00000000 900000000 Call Trace: [<6006b116>] ? printk+0x0/0x94 [<6001f375>] show_stack+0xfe/0x158 [<60371ea3>] ? dump_stack_print_info+0xe8/0xf1 [<60282bc6>] ? rtmsg_ifinfo_build_skb+0xca/0x10d [<6006b116>] ? printk+0x0/0x94 [<60371ee8>] dump_stack+0x2a/0x2c [<6003a68c>] __warn+0x10e/0x13e [<6003a82c>] warn_slowpath_null+0x48/0x4f [<60282bc6>] rtmsg_ifinfo_build_skb+0xca/0x10d [<60282c4d>] rtmsg_ifinfo_event.part.37+0x1e/0x43 [<60282c2f>] ? rtmsg_ifinfo_event.part.37+0x0/0x43 [<60282d03>] rtmsg_ifinfo+0x24/0x28 [<60264e86>] dev_close_many+0xba/0x119 [<60282cdf>] ? rtmsg_ifinfo+0x0/0x28 [<6027c225>] ? rtnl_is_locked+0x0/0x1c [<6026ca67>] rollback_registered_many+0x1ae/0x4ae [<600314be>] ? unblock_signals+0x0/0xae [<6026cdc0>] ? unregister_netdevice_queue+0x19/0xec [<6026ceec>] unregister_netdevice_many+0x21/0xa1 [<6027c765>] rtnl_delete_link+0x3e/0x4e [<60280ecb>] rtnl_dellink+0x262/0x29c [<6027c241>] ? rtnl_get_link+0x0/0x3e [<6027f867>] rtnetlink_rcv_msg+0x235/0x274 Fixes: be81a85f5f87 ("net: qualcomm: rmnet: Implement fill_info") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18hv_netvsc: Add NetVSP v6 and v6.1 into version negotiationHaiyang Zhang2-1/+166
This patch adds the NetVSP v6 and 6.1 message structures, and includes these versions into NetVSC/NetVSP version negotiation process. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18hv_netvsc: propogate Hyper-V friendly name into interface aliasStephen Hemminger1-0/+28
This patch implement the 'Device Naming' feature of the Hyper-V network device API. In Hyper-V on the host through the GUI or PowerShell it is possible to enable the device naming feature which causes the host to make available to the guest the name of the device. This shows up in the RNDIS protocol as the friendly name. The name has no particular meaning and is limited to 256 characters. The value can only be set via PowerShell on the host, but could be scripted for mass deployments. The default value is the string 'Network Adapter' and since that is the same for all devices and useless, the driver ignores it. In Windows, the value goes into a registry key for use in SNMP ifAlias. For Linux, this patch puts the value in the network device alias property; where it is visible in ip tools and SNMP. The host provided ifAlias is just a suggestion, and can be overridden by later ip commands. Also requires exporting dev_set_alias in netdev core. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: remove jumbo_tx_csum from chip config structHeiner Kallweit1-79/+54
According to the chip configuration entries only RTL8169 (ver <= 06) supports tx checksumming for jumbo packets. By the way: constant JUMBO_1K is a little misleading because it refers to the standard packet size and not to a jumbo packet size. By implementing this rule we can get rid of configuring tx checksumming support per chip type. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: improve pci region handlingHeiner Kallweit1-11/+5
The region to be used is always the first of type IORESOURCE_MEM. We can implement this rule directly w/o having to specify which region is the first one per configuration entry. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: drop member txd_version from struct rtl8169_privateHeiner Kallweit1-5/+7
txd_version is used in rtl_init_one() only, so we can drop member txd_version from struct rtl8169_private. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: improve rtl8169_get_mac_versionHeiner Kallweit1-11/+1
Certain entries in array mac_info[] are redundant, so remove them: 0x7cf, 0x2c200000 (VER 33): matched by entry 0x7c8, 0x2c000000 0x7cf, 0x28300000 (VER 26): matched by entry 0x7c8, 0x28000000 0x7cf, 0x3cb00000 (VER 24): matched by entry 0x7c8, 0x3c800000 0x7cf, 0x3c400000 (VER 22): matched by entry 0x7c8, 0x3c000000 0x7cf, 0x38500000 (VER 17): matched by entry 0x7c8, 0x38000000 0x7cf, 0x44900000 (VER 39): matched by entry 0x7c8, 0x44800000 0x7cf, 0x40b00000 (VER 30): matched by entry 0x7c8, 0x40800000 0x7cf, 0x40a00000 (VER 30): matched by entry 0x7c8, 0x40800000 0x7cf, 0x34a00000 (VER 09): matched by entry 0x7c8, 0x34800000 0x7cf, 0x24a00000 (VER 09): matched by entry 0x7c8, 0x24800000 In addition don't mask out bits 30 and 29 when printing the XID. Most likely this is a relict from the times when the driver covered RTL8169 chip version only. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: don't display tp->mmio_addr addressHeiner Kallweit1-2/+2
For security reasons since commit ad67b74d2469 "printk: hash addresses printed with %p" %p doesn't display the full address any longer. We could switch to %px, but I think the pointer address doesn't provide a real benefit, so remove printing the hashed address. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: drop member opts1_mask from struct rtl8169_privateHeiner Kallweit1-10/+8
We can get rid of member opts1_mask and in addition save a few cpu cycles in the hot path of rtl_rx(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: change interrupt handler argument typeHeiner Kallweit1-4/+3
Code can be a little simplified by switching the interrupt handler argument type to struct rtl8169_private *. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: change argument type of counters handling functionsHeiner Kallweit1-19/+13
The counter handling functions don't deal with the net_device, so code can be simplified by changing the argument type to struct rtl8169_private *. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: change hw_start argument typeHeiner Kallweit1-26/+15
Code can be simplified by changing the argument type of hw_start callbacks from struct net_device * to struct rtl8169_private *. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: remove rtl8169_map_to_asicHeiner Kallweit1-7/+2
This function is very simple and used only once, so we can inline the two statements. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: replace rx_buf_sz with a constantHeiner Kallweit1-19/+18
rx_buf_sz is constant, so we don't have to pass it as parameter and in general can replace it with a constant. When working on this I noticed that also before in rtl_set_rx_max_size() a value of 0x4000 is set, what is not in line with the chip spec. According to the spec only bits 0..13 are used and we set an effective value of zero therefore. However, the driver still seems to work and due to potential side effects I'm reluctant to make a change. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: remove unneeded check in rtl8169_rx_fillHeiner Kallweit1-3/+0
rtl8169_rx_fill() is called only once and directly before the call array tp->Rx_databuff[] is filled with zero's. Therefore we don't need this check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: improve rtl8169_init_ringHeiner Kallweit1-6/+4
This function doesn't use the net_device, therefore change the parameter to type struct rtl8169_private * to simplify the code. In addition we don't need the calculations in the memset statements, we can use the size of the arrays directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: simplify rtl8169_alloc_rx_dataHeiner Kallweit1-2/+1
dev->dev.parent has the same value as tp_to_dev(tp) (set by SET_NETDEV_DEV() in rtl_init_one()) and we know it can't be NULL. This allows us to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: switch to napi_schedule_irqoffHeiner Kallweit1-1/+1
napi_schedule() is called from hard irq context, so we can switch to napi_schedule_irqoff() and avoid some overhead. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: use constant NAPI_POLL_WAITHeiner Kallweit1-2/+1
We can use generic constant NAPI_POLL_WAIT instead of defining an own constant for the same value. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: use skb_copy_to_linear_data in rtl8169_try_rx_copyHeiner Kallweit1-1/+1
Not a giant leap for mankind, but let's avoid the open-coded memcpy and use standard helper skb_copy_to_linear_data instead. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: remove member align from struct rtl_cfg_infoHeiner Kallweit1-4/+0
Since commit 6f0333b8fde4 "r8169: use 50% less ram for RX ring" member align isn't used any longer, so remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18r8169: remove unused member features from structHeiner Kallweit1-2/+0
Member features of struct rtl8169_private isn't used any longer since commit 6c6aa15fdea5 "r8169: improve interrupt handling", so remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net: netcp: ethss: k2g: add promiscuous mode supportWingMan Kwok1-0/+56
This patch adds support for promiscuous mode in k2g's network driver. When upper layer instructs to transition from non-promiscuous mode to promiscuous mode or vice versa K2G network driver needs to configure ALE accordingly so that in case of non-promiscuous mode, ALE will not flood all unicast packets to host port, while in promiscuous mode, it will pass all received unicast packets to host port. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net: netcp: add api to support set rx mode in netcp modulesWingMan Kwok2-0/+20
This patch adds an API to support setting rx mode in netcp modules. If a netcp module needs to be notified when upper layer transitions from one rx mode to another and react accordingly, such a module will implement the new API set_rx_mode added in this patch. Currently rx modes supported are PROMISCUOUS and NON_PROMISCUOUS modes. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net: netcp: support probe deferralMurali Karicheri1-0/+4
The netcp driver shouldn't proceed until the knav qmss and dma devices are ready. So return -EPROBE_DEFER if these devices are not ready. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18Revert "net: netcp: remove dead code from the driver"Murali Karicheri1-0/+9
As the probe sequence is not guaranteed contrary to the assumption of the commit 2d8e276a9030, same has to be reverted. commit 2d8e276a9030 ("net: netcp: remove dead code from the driver") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net: netcp: ethss: use of_get_phy_mode() to support different RGMII modesMurali Karicheri1-0/+18
The phy used for K2G allows for internal delays to be added optionally to the clock circuitry based on board desing. To add this support, enhance the driver to use of_get_phy_mode() to read the phy-mode from the phy device and pass the same to phy through of_phy_connect(). Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net: netcp: ethss: re-use stats handling code for 2u hardwareMurali Karicheri1-1/+1
The stats block in 2u cpsw hardware is similar to the one on nu and hence handle it in a similar way by using a macro that includes 2u hardware as well. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net: netcp: ethss: map vlan priorities to zero flowMurali Karicheri1-0/+9
The driver currently support only vlan priority zero. So map the vlan priorities to zero flow in hardware. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net: netcp: ethss: use rgmii link status for 2u cpsw hardwareMurali Karicheri1-7/+27
Introduce rgmii link status to handle link state events for 2u cpsw hardware on K2G. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net: netcp: ethss: add support for handling rgmii link interfaceMurali Karicheri2-4/+13
2u cpsw hardware on K2G uses rgmii link to interface with Phy. So add support for this interface in the code so that driver can be re-used for 2u hardware. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net: netcp: ethss: make sgmii configuration conditionalMurali Karicheri1-5/+13
As a preparatory patch to add support for 2u cpsw hardware found on K2G SoC, make sgmii configuration conditional. This is required since 2u uses RGMII interface instead of SGMII and to allow for driver re-use. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net: netcp: ethss: use macro for checking ss_version consistentlyMurali Karicheri1-13/+16
Driver currently uses macro for NU and XBE hardwrae, while other places for older hardware such as that on K2H/K SoC (version 1.4 of the cpsw hardware, it explicitly check for the ss_version inline. Add a new macro for version 1.4 and use it to customize code in the driver. While at it also fix similar issue with checking XBE version by re-using existing macro IS_SS_ID_XGBE(). Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.