aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-10-27qlcnic: fix mac learningamit salecha2-0/+6
In failover bonding case, same mac address can be programmed on other slave function. Fw will delete old entry (original func) associated with that mac address. Need to reporgram mac address, if failover again happen to original function. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27ehea: fix use after freeEric Dumazet1-5/+5
ehea_start_xmit() dereferences skb after its freeing in ehea_xmit3() to get vlan tags. Move the offending block before the potential ehea_xmit3() call. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27qlge: bugfix: Restoring the vlan setting.Ron Mercer1-0/+17
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27be2net: Schedule/Destroy worker thread in probe()/remove() rather than open()/close()Somnath Kotur1-4/+18
When async mcc compls are rcvd on an i/f that is down (and so interrupts are disabled) they just lie unprocessed in the compl queue.The compl queue can eventually get filled up and cause the BE to lock up.The fix is to use be_worker to reap mcc compls when the i/f is down.be_worker is now launched in be_probe() and canceled in be_remove(). Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27gianfar: Fix crashes on RX path (Was Re: [Bugme-new] [Bug 19692] New: linux-2.6.36-rc5 crash with gianfar ethernet at full line rate traffic)Jarek Poplawski1-3/+3
The rx_recycle queue is global per device but can be accesed by many napi handlers at the same time, so it needs full skb_queue primitives (with locking). Otherwise, various crashes caused by broken skbs are possible. This patch resolves, at least partly, bugzilla bug 19692. (Because of some doubts that there could be still something around which is hard to reproduce my proposal is to leave this bug opened for a month.) Fixes commit: 0fd56bb5be6455d0d42241e65aed057244665e5e ("gianfar: Add support for skb recycling") Reported-by: emin ak <eminak71@gmail.com> Tested-by: emin ak <eminak71@gmail.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> CC: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26drivers/atm/eni.c: Remove multiple uses of KERN_<level>Joe Perches1-3/+4
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26tg3: Do not call device_set_wakeup_enable() under spin_lock_bhRafael J. Wysocki1-5/+5
The tg3 driver calls device_set_wakeup_enable() under spin_lock_bh, which causes a problem to happen after the recent core power management changes, because this function can sleep now. Fix this by moving the device_set_wakeup_enable() call out of the spin_lock_bh-protected area. Reported-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6David S. Miller13-100/+215
2010-10-26can: mcp251x: fix reception of standard RTR framesMarc Kleine-Budde1-0/+3
This patch sets the missing CAN_RTR_FLAG if a standard RTR frame is received. (For extended frames the CAN_RTR_FLAG was already set correctly.) Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26can: flexcan: fix use after free of privMarc Kleine-Budde1-1/+2
The priv is part of the memory allocated by alloc_candev(). This patch moved the free it after last usage of priv. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26drivers/net: sgiseeq: fix return on errorNicolas Kaiser1-1/+1
If we continue on error, we'd likely free the IRQ that we didn't get, right? Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25pch_can: depends on PCIRandy Dunlap1-1/+1
Fix pch_can build when CONFIG_PCI is not enabled. It uses pci interfaces and data structures, so it should depend on PCI. drivers/net/can/pch_can.c:1044: error: implicit declaration of function 'pci_enable_msi' drivers/net/can/pch_can.c:1079: error: implicit declaration of function 'pci_disable_msi' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25tms380tr: Use mdelay() in tms380tr_wait().David S. Miller1-1/+1
This driver tries to do up to half-second udelay() calls, which overflows on x86-64. Reported-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25mlx4_en: Fix out of bounds array accessEli Cohen1-0/+11
When searching for a free entry in either mlx4_register_vlan() or mlx4_register_mac(), and there is no free entry, the loop terminates without updating the local variable free thus causing out of array bounds access. Fix this by adding a proper check outside the loop. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25macb: Don't re-enable interrupts while in polling modeJoshua Hoke1-11/+16
On a busy network, the macb driver could get stuck in the interrupt handler, quickly triggering the watchdog, due to a confluence of factors: 1. macb_poll re-enables interrupts unconditionally, even when it will be called again because it exhausted its rx budget 2. macb_interrupt only disables interrupts after scheduling macb_poll, but scheduling fails when macb_poll is already scheduled because it didn't call napi_complete 3. macb_interrupt loops until the interrupt status register is clear, which will never happen in this case if the driver doesn't disable the RX interrupt Since macb_interrupt runs in interrupt context, this effectively locks up the machine, triggering the hardware watchdog. This issue was readily reproducible on a flooded network with a modified 2.6.27.48 kernel. The same problem appears to still be in the 2.6.36-rc8 driver code, so I am submitting this patch against that version. I have not tested this version of the patch except to make sure the kernel compiles. Signed-off-by: Joshua Hoke <joshua.hoke@sixnet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25be2net: Fix CSO for UDP packetsSomnath Kotur1-12/+8
We're setting skb->ip_summed to CHECKSUM_NONE for all non-TCP pkts, making the stack recompute checksum.This is a bug for UDP pkts for which cso must be used. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25be2net: Call netif_carier_off() after register_netdev()Somnath Kotur1-1/+1
Calling netif_carrier_off before register_netdev was causing the network interface to miss a linkwatch pending event leading to an inconsistent state if the link is not up when interface is initialized.This is now invoked after register_netdev. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25cxgb3: fix device opening error pathDivy Le Ray1-3/+5
Only negative return from bind_qsets() should be considered an error and propagated. It fixes an issue reported by IBM on P Series platform. Signed-off-by: Divy Le Ray <divy@chelsio.com> Tested-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25iwlwifi: quiet a noisy printkDon Fry1-1/+2
Timing issues in microcode for some devices can cause a compressed BA to be sent to the driver prior to returning any a-MPDU notification. Traces show RTS-CTS is exchanged and then the timer fires which causes an empty BA to be sent which acknowledges nothing. This results in a noisy printk. Only print the message if the bitmap is non-zero. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: resume aggregation immediately after a hardware resetFelix Fietkau3-4/+4
Since aggregation is usually triggered by tx completion, a hardware reset (because of beacon stuck, tx hang or baseband hang) can significantly delay the transmission of the next AMPDU (until the next tx completion event). Fix this by rescheduling aggregation after such a reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix scheduling while atomicChristian Lamparter1-1/+1
This patch fixes the following mishap: BUG: scheduling while atomic: wpa_supplicant/4164/0x00000002 Modules linked in: carl9170 mac80211 [...] Pid: 4164, comm: wpa_supplicant Not tainted 2.6.36-wl+ #119 Call Trace: [<c13779a9>] ? schedule+0x349/0x4c0 [<c13780d6>] ? schedule_timeout+0x106/0x1e0 [<c1037f50>] ? process_timeout+0x0/0x10 [<c1377e8d>] ? wait_for_common+0x9d/0x140 [<c1029110>] ? default_wake_function+0x0/0x10 [<f80c6080>] ? carl9170_exec_cmd+0xf0/0x250 [carl9170] [<f80c695e>] ? carl9170_set_mac_reg+0x5e/0x70 [carl9170] [<f80c3f76>] ? carl9170_op_add_interface+0x176/0x310 [carl9170] [...] rcu_read_unlock() call was erroneously placed after the sync. function carl9170_mod_virtual_mac. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25b43: N-PHY: fix infinite-loop-typoRafał Miłecki1-1/+1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25wl1251: fix module namesGrazvydas Ignotas1-3/+5
The wl1251 move accidently renamed wl1251_sdio and wl1251_spi modules to just sdio and spi. Restore proper module names. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: fix handling of rate control probe framesFelix Fietkau1-0/+6
The ath9k aggregation code was already checking the rate control probe flag to prevent starting an aggregate frame with a sampling rate. What was missing was closing an aggregate before adding a probing frame to it. Without that, rate control cannot have precise control over probing, which delays using faster rates when the channel conditions improve. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: fix crash in ath_update_survey_statsFelix Fietkau1-0/+3
If ah->curchan is uninitialized, the channel index is bogus, which leads to invalid memory access when the cycle counters are updated. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k_hw: Fix divide by zero cases in paprd.Senthil Balasubramanian1-5/+9
We are not handling all divide by zero cases in paprd. Add additional checks for divide by zero cases in papard. This patch has fixes intended for kernel 2.6.36. Cc: stable@kernel.org Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k_hw: Fix TX carrier leakage for IEEE compliance on AR9003 2.2Luis R. Rodriguez1-56/+135
This updates the initvals for the AR9003 2.2 chipsets. The initvals are the initial register values we use for our registers upon hardware reset. This synchs up the initvals to match what our latest recommendation from our systems engineering team. The description of changes in this update: Improves ability to support very strong Rx conditions. Enhances DFS support for AP-mode. Improves performance of Tx carrier leak calibration. Adds support for Japan channel 14 Tx filtering requirements. Improves Tx power accuracy. Impact: Update required to address degraded throughput at very short range. Update required for AP-mode DFS certification. Update required to comply to IEEE Tx carrier leak specification. May not meet expected +/- 2 dB Tx power accuracy without update. The most important fix here would be the TX carrier leakage required to comply with IEEE 802.11 specifications. The group of changes have been tested all together in one release. References: Osprey 2.2 header file ver #33 Checksums: $ ./initvals -f ar9003-2p2 0x000000004a488fc7 ar9300_2p2_radio_postamble 0x0000000046cb1300 ar9300Modes_lowest_ob_db_tx_gain_table_2p2 0x00000000e912711f ar9300Modes_fast_clock_2p2 0x0000000037ac0ee8 ar9300_2p2_radio_core 0x00000000047a7700 ar9300Common_rx_gain_table_merlin_2p2 0x0000000003f783bb ar9300_2p2_mac_postamble 0x00000000301fc841 ar9300_2p2_soc_postamble 0x000000005ec8075f ar9200_merlin_2p2_radio_core 0x0000000083372ffa ar9300_2p2_baseband_postamble 0x00000000c4f59974 ar9300_2p2_baseband_core 0x00000000e20d2e72 ar9300Modes_high_power_tx_gain_table_2p2 0x000000007fd55c70 ar9300Modes_high_ob_db_tx_gain_table_2p2 0x0000000029495000 ar9300Common_rx_gain_table_2p2 0x0000000042cb1300 ar9300Modes_low_ob_db_tx_gain_table_2p2 0x00000000c4739cd6 ar9300_2p2_mac_core 0x000000003521a300 ar9300Common_wo_xlna_rx_gain_table_2p2 0x00000000a15ccf1b ar9300_2p2_soc_preamble 0x0000000029734396 ar9300PciePhy_pll_on_clkreq_disable_L1_2p2 0x000000002d834396 ar9300PciePhy_clkreq_enable_L1_2p2 0x0000000029834396 ar9300PciePhy_clkreq_disable_L1_2p2 $ ./initvals -f ar9003-2p2 | sha1sum 0ceddb5cf66737610fb51f04cf3e9ff71870c7b4 - Cc: stable@kernel.org Cc: Yixiang Li <yixiang.li@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix memory leak issue in async cmd macro wrappersChristian Lamparter1-23/+28
This patch continues where the previous commit: "carl9170: fix async command buffer leak" left off. Similar to carl9170_reboot/carl9170_powersave, the carl9170_async_regwrite* macros would leak the temporary command buffer, if __carl9170_exec_cmd fails to upload the command to the device. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix async command buffer leakChristian Lamparter1-6/+19
If __carl9170_exec_cmd fails to upload an asynchronous command to the device, the functions: carl9170_reboot and carl9170_powersave will leak the temporary command assembly buffer. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath5k: Properly initialize ath_common->cc_lock.Ben Greear1-0/+1
Otherwise, lockdep splats, at the least: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 0, comm: swapper Not tainted 2.6.36-rc8-wl+ #32 Call Trace: [<c075d940>] ? printk+0xf/0x17 [<c045507a>] register_lock_class+0x5a/0x29e [<c0456af5>] __lock_acquire+0xa2/0xb8c [<c0455be2>] ? mark_lock+0x1e/0x1de [<c041a540>] ? acpi_get_override_irq+0x85/0x8c [<c0455536>] ? trace_hardirqs_off+0xb/0xd [<c0457639>] lock_acquire+0x5a/0x78 [<f8126835>] ? ath5k_ani_calibration+0x24/0x52b [ath5k] [<c075f6ed>] _raw_spin_lock_bh+0x20/0x2f [<f8126835>] ? ath5k_ani_calibration+0x24/0x52b [ath5k] [<f8126835>] ath5k_ani_calibration+0x24/0x52b [ath5k] [<c0438f99>] ? tasklet_action+0x3b/0xc6 [<f8123c2b>] ath5k_tasklet_ani+0x18/0x22 [ath5k] [<c0438fd1>] tasklet_action+0x73/0xc6 [<c043945f>] __do_softirq+0x86/0x111 [<c0439520>] do_softirq+0x36/0x5a [<c0439659>] irq_exit+0x35/0x69 [<c0403fb9>] do_IRQ+0x86/0x9a [<c04034ee>] common_interrupt+0x2e/0x40 [<c045007b>] ? do_adjtimex+0x223/0x55e [<c0408245>] ? mwait_idle+0x5c/0x6c [<c040227f>] cpu_idle+0x4e/0x6b [<c074b6e9>] rest_init+0x8d/0x92 [<c09758ea>] start_kernel+0x320/0x325 [<c09750d0>] i386_start_kernel+0xd0/0xd7 Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: Properly initialize ath_common->cc_lock.Ben Greear1-0/+1
Otherwise, lockdep splats, at the least: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2240, comm: ip Not tainted 2.6.36-rc8-wl+ #32 Call Trace: [<c075d940>] ? printk+0xf/0x17 [<c045507a>] register_lock_class+0x5a/0x29e [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0456af5>] __lock_acquire+0xa2/0xb8c [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0457639>] lock_acquire+0x5a/0x78 [<f8c5115b>] ? ath9k_config+0x274/0x3d8 [ath9k] [<c075f602>] _raw_spin_lock_irqsave+0x2f/0x3f [<f8c5115b>] ? ath9k_config+0x274/0x3d8 [ath9k] [<f8c5115b>] ath9k_config+0x274/0x3d8 [ath9k] [<f8c0ba2e>] ieee80211_hw_config+0x11b/0x125 [mac80211] [<f8c17edf>] ieee80211_do_open+0x3c5/0x466 [mac80211] [<f8c171d6>] ? ieee80211_check_concurrent_iface+0x21/0x13a [mac80211] [<f8c17fdb>] ieee80211_open+0x5b/0x5e [mac80211] [<c06ce76b>] __dev_open+0x80/0xae [<c06cc99b>] __dev_change_flags+0xa0/0x115 [<c06ce6bf>] dev_change_flags+0x13/0x3f [<c06d7e78>] do_setlink+0x23a/0x51b [<c0455037>] ? register_lock_class+0x17/0x29e [<c06d847c>] rtnl_newlink+0x269/0x431 [<c06d8291>] ? rtnl_newlink+0x7e/0x431 [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0455de9>] ? mark_held_locks+0x47/0x5f [<c075ebcf>] ? __mutex_lock_common+0x2bb/0x2d6 [<c0456045>] ? trace_hardirqs_on_caller+0x104/0x125 [<c075ebe0>] ? __mutex_lock_common+0x2cc/0x2d6 [<c06d8213>] ? rtnl_newlink+0x0/0x431 [<c06d79e2>] rtnetlink_rcv_msg+0x182/0x198 [<c06d7860>] ? rtnetlink_rcv_msg+0x0/0x198 [<c06e503c>] netlink_rcv_skb+0x30/0x77 [<c06d7859>] rtnetlink_rcv+0x1b/0x22 [<c06e4e77>] netlink_unicast+0xbe/0x119 [<c06e5a15>] netlink_sendmsg+0x234/0x24c [<c06bf93a>] __sock_sendmsg+0x51/0x5a [<c06bfba4>] sock_sendmsg+0x93/0xa7 [<c04968cf>] ? might_fault+0x47/0x81 [<c0496904>] ? might_fault+0x7c/0x81 [<c06c7904>] ? copy_from_user+0x8/0xa [<c06c7c2d>] ? verify_iovec+0x3e/0x6d [<c06bfd8c>] sys_sendmsg+0x149/0x193 [<c0455037>] ? register_lock_class+0x17/0x29e [<c0455be2>] ? mark_lock+0x1e/0x1de [<c0498d7a>] ? __do_fault+0x1fc/0x3a5 [<c048690a>] ? unlock_page+0x40/0x43 [<c0498ef7>] ? __do_fault+0x379/0x3a5 [<c04576dd>] ? lock_release_non_nested+0x86/0x1d8 [<c04968cf>] ? might_fault+0x47/0x81 [<c04968cf>] ? might_fault+0x47/0x81 [<c06c148b>] sys_socketcall+0x15e/0x1a5 [<c0402f1c>] sysenter_do_call+0x12/0x38 Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-24typhoon: update to new VLAN acceleration modelDavid Dillow1-63/+25
Also correct the byteswapping as we keep the TCI in host order. Signed-off-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24typhoon: wait for RX mode commands to finishDavid Dillow1-1/+1
When adding VLAN devices, we can get several calls to typhoon_set_rx_mode() in quick succession. Because we didn't wait for the commands to complete, we could run out of command descriptors and fail to set the RX mode. Signed-off-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24slhc: Don't export symbols twiceDenis Kirjanov1-11/+4
Don't export symbols twice. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24jme: Support WoL after shutdownGuo-Fu Tseng1-15/+30
Adding shutdown function that setup wake if wol is enabled. Add jme_phy_on in jme_set_100m_half in case it is shutting down or suspending when interface is down(phy_off by default). v2 updates: Removed CONFIG_PM ifdef for jme_set_100m_half and jme_wait_link. It would be nice if it can be applied to net-2.6 along with other patches sent few days ago. If it is not appropriate, please ignore the net-2.6 request, and apply it to net-next-2.6 as previous patch. :) Reported-and-helped-by: Сtac <Taoga@yandex.ru> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24vmxnet3: fix typo setting confPAHarvey Harrison1-1/+1
It's a le64, not a le32, typo in one place only. Noticed by sparse: drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: warning: incorrect type in assignment (different base types) drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: expected restricted __le64 [usertype] confPA drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: got restricted __le32 [usertype] <noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24vmxnet3: annotate hwaddr members as __iomem pointersHarvey Harrison1-2/+2
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24vmxnet3: remove set_flag_le{16,64} helpersHarvey Harrison5-41/+22
It's easier to just annotate the constants as little endian types and set/clear the flags directly. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24cxgb4: update to utilize the newer VLAN infrastructureDimitris Michailidis3-31/+24
Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24cxgb4: fix crash due to manipulating queues before registrationDimitris Michailidis1-1/+1
Before commit "net: allocate tx queues in register_netdevice" netif_tx_stop_all_queues and related functions could be used between device allocation and registration but now only after registration. cxgb4 has such a call before registration and crashes now. Move it after register_netdev. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24can: tscan1: add driver for TS-CAN1 boardsAndre B. Oliveira3-0/+229
Add driver for Technologic Systems TS-CAN1 PC104 peripheral boards. Signed-off-by: Andre B. Oliveira <anbadeol@gmail.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24e1000: make e1000_reinit_safe localstephen hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24bnx2x: make local function static and remove dead codestephen hemminger7-242/+62
Make many functions that are only used in one file static. Remove dead code for override_led_value. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24qlge: disable unsed dump codestephen hemminger1-6/+4
The driver has lots of unused code to dump data structures to console. Use existing simple way to remove the code with ifdef. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24qlge: make local functions staticstephen hemminger3-7/+8
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24vxge: make functions local and remove dead codestephen hemminger7-615/+304
Use results of make namespacecheck to make functions local and remove code that is not used. Also rename initialize_ethtool_ops to vxge_initialize_ethtool_ops. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24phylib: make local function staticstephen hemminger2-17/+15
The following functions are not used directly by any drivers: phy_attach_direct phy_device_create phy_prepare_link genphy_config_advert genphy_setup_forced phy_config_interrupt phy_clear_interrypt phy_sanitize_settings phy_enable_interrupts phy_disable_interrupts Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24atlx: make local functions/data staticstephen hemminger3-11/+14
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24atl1c: make functions staticstephen hemminger2-4/+4
The up/down are only used in this file. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24benet: make be_poll_rx localstephen hemminger1-1/+1
Only used in one file. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.