| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull ceph fixes from Ilya Dryomov:
"A subtle deadlock on lock_rwsem (marked for stable) and rbd fixes for
a -rc1 regression.
Also included a rare WARN condition tweak"
* tag 'ceph-for-5.14-rc3' of git://github.com/ceph/ceph-client:
rbd: resurrect setting of disk->private_data in rbd_init_disk()
ceph: don't WARN if we're still opening a session to an MDS
rbd: don't hold lock_rwsem while running_list is being drained
rbd: always kick acquire on "acquired" and "released" notifications
|
|
Pull ACPI fixes from Rafael Wysocki:
"These fix a recently broken Kconfig dependency and ACPI device
reference counting in an iterator macro.
Specifics:
- Fix recently broken Kconfig dependency for the ACPI table override
via built-in initrd (Robert Richter)
- Fix ACPI device reference counting in the for_each_acpi_dev_match()
helper macro to avoid use-after-free (Andy Shevchenko)"
* tag 'acpi-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: utils: Fix reference counting in for_each_acpi_dev_match()
ACPI: Kconfig: Fix table override from built-in initrd
|
|
Pull driver core fixes from Greg KH:
"Here are two small driver core fixes to resolve some reported problems
for 5.14-rc3. They include:
- aux bus memory leak fix
- unneeded warning message removed when removing a device link.
Both have been in linux-next with no reported problems"
* tag 'driver-core-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Prevent warning when removing a device link from unregistered consumer
driver core: auxiliary bus: Fix memory leak when driver_register() fail
|
|
Pull char/misc fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.14-rc3.
Included in here are:
- MAINTAINERS file updates for two changes in different driver
subsystems
- mhi bus bugfixes
- nds32 bugfix that resolves a reported problem
All have been in linux-next with no reported problems"
* tag 'char-misc-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nds32: fix up stack guard gap
MAINTAINERS: Change ACRN HSM driver maintainer
MAINTAINERS: Update for VMCI driver
bus: mhi: pci_generic: Fix inbound IPCR channel
bus: mhi: core: Validate channel ID when processing command completions
bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean
|
|
Pull USB fixes from Greg KH:
"Here are some USB fixes for 5.14-rc3 to resolve a bunch of tiny
problems reported. Included in here are:
- dtsi revert to resolve a problem which broke android systems that
relied on the dts name to find the USB controller device.
People are still working out the "real" solution for this, but for
now the revert is needed.
- core USB fix for pipe calculation found by syzbot
- typec fixes
- gadget driver fixes
- new usb-serial device ids
- new USB quirks
- xhci fixes
- usb hub fixes for power management issues reported
- other tiny fixes
All have been in linux-next with no reported problems"
* tag 'usb-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"
usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not set
Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"
usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.
usb: dwc2: Skip clock gating on Samsung SoCs
usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode.
usb: phy: Fix page fault from usb_phy_uevent
usb: xhci: avoid renesas_usb_fw.mem when it's unusable
usb: gadget: u_serial: remove WARN_ON on null port
usb: dwc3: avoid NULL access of usb_gadget_driver
usb: max-3421: Prevent corruption of freed memory
usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probe
MAINTAINERS: repair reference in USB IP DRIVER FOR HISILICON KIRIN 970
usb: typec: stusb160x: Don't block probing of consumer of "connector" nodes
usb: typec: stusb160x: register role switch before interrupt registration
USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
usb: ehci: Prevent missed ehci interrupts with edge-triggered MSI
usb: hub: Disable USB 3 device initiated lpm if exit latency is too high
...
|
|
* acpi-utils:
ACPI: utils: Fix reference counting in for_each_acpi_dev_match()
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes - a bunch of amdgpu fixes are the main thing mostly for
the new gpus. There is also some i915 reverts for older changes that
were having some unwanted side effects. One nouveau fix for a report
regressions, and otherwise just some misc fixes.
core:
- fix for non-drm ioctls on drm fd
panel:
- avoid double free
ttm:
- refcounting fix
- NULL checks
amdgpu:
- Yellow Carp updates
- Add some Yellow Carp DIDs
- Beige Goby updates
- CIK 10bit 4K regression fix
- GFX10 golden settings updates
- eDP panel regression fix
- Misc display fixes
- Aldebaran fix
- fix COW checks
nouveau:
- init BO GEM fields
i915:
- revert async command parsing
- revert fence error propogation
- GVT fix for shadow ppgtt
vc4:
- fix interrupt handling"
* tag 'drm-fixes-2021-07-23' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/panel: raspberrypi-touchscreen: Prevent double-free
drm/amdgpu - Corrected the video codecs array name for yellow carp
drm/amd/display: Fix ASSR regression on embedded panels
drm/amdgpu: add yellow carp pci id (v2)
drm/amdgpu: update yellow carp external rev_id handling
drm/amd/pm: Support board calibration on aldebaran
drm/amd/display: change zstate allow msg condition
drm/amd/display: Populate dtbclk entries for dcn3.02/3.03
drm/amd/display: Line Buffer changes
drm/amd/display: Remove MALL function from DCN3.1
drm/amd/display: Only set default brightness for OLED
drm/amd/display: Update bounding box for DCN3.1
drm/amd/display: Query VCO frequency from register for DCN3.1
drm/amd/display: Populate socclk entries for dcn3.02/3.03
drm/amd/display: Fix max vstartup calculation for modes with borders
drm/amd/display: implement workaround for riommu related hang
drm/amd/display: Fix comparison error in dcn21 DML
drm/i915: Correct the docs for intel_engine_cmd_parser
drm/ttm: add missing NULL checks
drm/ttm: Force re-init if ttm_global_init() fails
...
|
|
Short summary of fixes pull:
* Return -ENOTTY for non-DRM ioctls
* amdgpu: Fix COW checks
* nouveau: init BO GME fields
* panel: Avoid double free
* ttm: Fix refcounting in ttm_global_init(); NULL checks
* vc4: Fix interrupt handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YPlbkmH6S4VAHP9j@linux-uq9g.fritz.box
|
|
Couple reverts from Jason getting rid of asynchronous command parsing
and fence error propagation and a GVT fix of shadow ppgtt invalidation
with proper D3 state tracking from Colin.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YPl1sIyruD0U5Orl@intel.com
|
|
Pull array bounds warning fix from Gustavo Silva:
"Fix a couple of out-of-bounds warnings in the media subsystem.
This is part of the ongoing efforts to globally enable -Warray-bounds"
* tag 'array-bounds-fixes-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()
|
|
Johan writes:
USB-serial fixes for 5.14-rc3
Here are some new device ids and a device-id comment fix.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.14-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
USB: serial: cp210x: fix comments for GE CS1000
USB: serial: option: add support for u-blox LARA-R6 family
|
|
Pull hyperv fixes from Wei Liu:
- bug fix from Haiyang for vmbus CPU assignment
- revert of a bogus patch that went into 5.14-rc1
* tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Revert "x86/hyperv: fix logical processor creation"
Drivers: hv: vmbus: Fix duplicate CPU assignments within a device
|
|
Pull networking fixes from David Miller:
1) Fix type of bind option flag in af_xdp, from Baruch Siach.
2) Fix use after free in bpf_xdp_link_release(), from Xuan Zhao.
3) PM refcnt imbakance in r8152, from Takashi Iwai.
4) Sign extension ug in liquidio, from Colin Ian King.
5) Mising range check in s390 bpf jit, from Colin Ian King.
6) Uninit value in caif_seqpkt_sendmsg(), from Ziyong Xuan.
7) Fix skb page recycling race, from Ilias Apalodimas.
8) Fix memory leak in tcindex_partial_destroy_work, from Pave Skripkin.
9) netrom timer sk refcnt issues, from Nguyen Dinh Phi.
10) Fix data races aroun tcp's tfo_active_disable_stamp, from Eric
Dumazet.
11) act_skbmod should only operate on ethernet packets, from Peilin Ye.
12) Fix slab out-of-bpunds in fib6_nh_flush_exceptions(),, from Psolo
Abeni.
13) Fix sparx5 dependencies, from Yajun Deng.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
dpaa2-switch: seed the buffer pool after allocating the swp
net: sched: cls_api: Fix the the wrong parameter
net: sparx5: fix unmet dependencies warning
net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum
net: dsa: ensure linearized SKBs in case of tail taggers
ravb: Remove extra TAB
ravb: Fix a typo in comment
net: dsa: sja1105: make VID 4095 a bridge VLAN too
tcp: disable TFO blackhole logic by default
sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not set
net: ixp46x: fix ptp build failure
ibmvnic: Remove the proper scrq flush
selftests: net: add ESP-in-UDP PMTU test
udp: check encap socket in __udp_lib_err
sctp: update active_key for asoc when old key is being replaced
r8169: Avoid duplicate sysfs entry creation error
ixgbe: Fix packet corruption due to missing DMA sync
Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"
ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions
fsl/fman: Add fibre support
...
|
|
Pull MMC fixes from Ulf Hansson:
- Use kref to fix KASAN splats triggered during card removal
- Don't allocate IDA for OF aliases
* tag 'mmc-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Don't allocate IDA for OF aliases
mmc: core: Use kref in place of struct mmc_blk_data::usage
|
|
Any interraction with the buffer pool (seeding a buffer, acquire one) is
made through a software portal (SWP, a DPIO object).
There are circumstances where the dpaa2-switch driver probes on a DPSW
before any DPIO devices have been probed. In this case, seeding of the
buffer pool will lead to a panic since no SWPs are initialized.
To fix this, seed the buffer pool after making sure that the software
portals have been probed and are ready to be used.
Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mipi_dsi_device allocated by mipi_dsi_device_register_full() is
already free'd on release.
Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720134525.563936-9-maxime@cerno.tech
|
|
WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES
Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=y] && HAS_IOMEM [=y]
Selected by [y]:
- SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] && OF [=y]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Align the member description comments for struct ravb_desc by
removing the extra TAB.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the typo RX->TX in comment, as the code following the comment
process TX and not RX.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This simple series of commands:
ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0
fails on sja1105 with the following error:
[ 33.439103] sja1105 spi0.1: vlan-lookup-table needs to have at least the default untagged VLAN
[ 33.447710] sja1105 spi0.1: Invalid config, cannot upload
Warning: sja1105: Failed to change VLAN Ethertype.
For context, sja1105 has 3 operating modes:
- SJA1105_VLAN_UNAWARE: the dsa_8021q_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_FULL: the bridge_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_BEST_EFFORT: both the dsa_8021q_vlans and the
bridge_vlans are committed to hardware
Swapping out a VLAN list and another in happens in
sja1105_build_vlan_table(), which performs a delta update procedure.
That function is called from a few places, notably from
sja1105_vlan_filtering() which is called from the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler.
The above set of 2 commands fails when run on a kernel pre-commit
8841f6e63f2c ("net: dsa: sja1105: make devlink property
best_effort_vlan_filtering true by default"). So the priv->vlan_state
transition that takes place is between VLAN-unaware and full VLAN
filtering. So the dsa_8021q_vlans are swapped out and the bridge_vlans
are swapped in.
So why does it fail?
Well, the bridge driver, through nbp_vlan_init(), first sets up the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute, and only then
proceeds to call nbp_vlan_add for the default_pvid.
So when we swap out the dsa_8021q_vlans and swap in the bridge_vlans in
the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler, there are no bridge
VLANs (yet). So we have wiped the VLAN table clean, and the low-level
static config checker complains of an invalid configuration. We _will_
add the bridge VLANs using the dynamic config interface, albeit later,
when nbp_vlan_add() calls us. So it is natural that it fails.
So why did it ever work?
Surprisingly, it looks like I only tested this configuration with 2
things set up in a particular way:
- a network manager that brings all ports up
- a kernel with CONFIG_VLAN_8021Q=y
It is widely known that commit ad1afb003939 ("vlan_dev: VLAN 0 should be
treated as "no vlan tag" (802.1p packet)") installs VID 0 to every net
device that comes up. DSA treats these VLANs as bridge VLANs, and
therefore, in my testing, the list of bridge_vlans was never empty.
However, if CONFIG_VLAN_8021Q is not enabled, or the port is not up when
it joins a VLAN-aware bridge, the bridge_vlans list will be temporarily
empty, and the sja1105_static_config_reload() call from
sja1105_vlan_filtering() will fail.
To fix this, the simplest thing is to keep VID 4095, the one used for
CPU-injected control packets since commit ed040abca4c1 ("net: dsa:
sja1105: use 4095 as the private VLAN for untagged traffic"), in the
list of bridge VLANs too, not just the list of tag_8021q VLANs. This
ensures that the list of bridge VLANs will never be empty.
Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Reported-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
amd-drm-fixes-5.14-2021-07-21:
amdgpu:
- Yellow Carp updates
- Add some Yellow Carp DIDs
- Beige Goby updates
- CIK 10bit 4K regression fix
- GFX10 golden settings updates
- eDP panel regression fix
- Misc display fixes
- Aldebaran fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215800.17590-1-alexander.deucher@amd.com
|
|
Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull spi fixes from Mark Brown:
"A collection of driver specific fixes, there was a bit of a kerfuffle
with some last minute review on hte spi-cadence-quadspi division by
zero change but otherwise nothing terribly remarkable here - important
fixes if you have the hardware but nothing with too wide an impact"
* tag 'spi-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-bcm2835: Fix deadlock
spi: cadence: Correct initialisation of runtime PM again
spi: cadence-quadspi: Disable Auto-HW polling
spi: spi-cadence-quadspi: Fix division by zero warning
spi: spi-cadence-quadspi: Revert "Fix division by zero warning"
spi: spi-cadence-quadspi: Fix division by zero warning
spi: mediatek: move devm_spi_register_master position
spi: mediatek: fix fifo rx mode
spi: atmel: Fix CS and initialization bug
spi: stm32: fixes pm_runtime calls in probe/remove
spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay
spi: stm32h7: fix full duplex irq handler handling
|
|
Pull regulator fixes from Mark Brown:
"A few driver specific fixes that came in since the merge window, plus
a change to mark the regulator-fixed-domain DT binding as deprecated
in order to try to to discourage any new users while a better solution
is put in place"
* tag 'regulator-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: hi6421: Fix getting wrong drvdata
regulator: mtk-dvfsrc: Fix wrong dev pointer for devm_regulator_register
regulator: fixed: Mark regulator-fixed-domain as deprecated
regulator: bd9576: Fix testing wrong flag in check_temp_flag_mismatch
regulator: hi6421v600: Fix getting wrong drvdata that causes boot failure
regulator: rt5033: Fix n_voltages settings for BUCK and LDO
regulator: rtmv20: Fix wrong mask for strobe-polarity-high
|
|
[Why]
Regression found in some embedded panels traces back to the earliest
upstreamed ASSR patch. The changed code flow are causing problems
with some panels.
[How]
- Change ASSR enabling code while preserving original code flow
as much as possible
- Simplify the code on guarding with internal display flag
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add Yellow Carp PCI id support.
v2: add another DID
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
0x1681 has a different external revision id.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for board power calibration on Aldebaran.
Board calibration is done after DC offset calibration.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
PMFW message which previously thought to only control Z9 controls both
Z9 and Z10. Also HW design team requested that Z9 must only be supported
on eDP due to content protection interop.
[How]
Change zstate support condition to match updated policy
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Populate dtbclk values from bwparams for dcn302, dcn303.
[How]
dtbclk values are fetched from bandwidthparams for all DPM levels and
for DPM levels where smu returns 0, previous level values are reported.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines
of 4K resolution lines to 5 lines of 4K resolution lines. All Line
Buffer can be used as extended memory for P State change latency hiding.
The maximum number of lines is increased to 32 lines. Finally,
LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB
memory piece 2) are not affected, no change in size, only 3 pieces is
affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0
and LB_MEMORY_CONFIG_3 (for 4:2:0) modes.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to
DMUB just remove the function pointer.
[how]
Remove apply_idle_power_optimizations from function pointers structure
for DCN31
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We used to unconditionally set backlight path as AUX for panels capable
of backlight adjustment via DPCD in set default brightness.
[How]
This should be limited to OLED panel only since we control backlight via
PWM path for SDR mode in LCD HDR panel.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
We're missing a default value for dram_channel_width_bytes in the
DCN3.1 SOC bounding box and we don't currently have the interface in
place to query the actual value from VBIOS.
Put in a hardcoded default until we have the interface in place.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Hardcoding the VCO frequency isn't correct since we don't own or control
the value.
In the case where the hardcode is also missing we can't lightup display.
[How]
Query from the CLK register instead. Update the DFS frequency to be able
to compute the VCO frequency.
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Initialize socclk entries in bandwidth params for dcn302, dcn303.
[How]
Fetch the sockclk values from smu for the DPM levels and for the DPM
levels where smu returns 0, previous level values are reported.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Vertical and horizontal borders in timings are treated as increasing the
active area - vblank and hblank actually shrink.
Our input into DML does not include these borders so it incorrectly
assumes it has more time than available for vstartup and tmdl
calculations for some modes with borders.
An example of such a timing would be 640x480@72Hz:
h_total: 832
h_border_left: 8
h_addressable: 640
h_border_right: 8
h_front_porch: 16
h_sync_width: 40
v_total: 520
v_border_top: 8
v_addressable: 480
v_border_bottom: 8
v_front_porch: 1
v_sync_width: 3
pix_clk_100hz: 315000
[How]
Include borders as part of destination vactive/hactive.
This change DCN20+ so it has wide impact, but the destination vactive
and hactive are only really used for vstartup calculation anyway.
Most modes do not have vertical or horizontal borders.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
During S4/S5/reboot, sometimes riommu invalidation request arrive too
early, DCN may be unable to respond to the invalidation request
resulting in pstate hang.
[How]
VBIOS will force allow pstate for riommu invalidation and driver will
clear it after powering down display pipes.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
A comparison error made it possible to not iterate through all the
specified prefetch modes.
[how]
Correct "<" to "<="
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the USB serial device ID for the CEL ZigBee EM3588 radio stick.
Signed-off-by: John Keeping <john@metanate.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The rework of the ixp46x cpu detection left the network driver in
a half broken state:
drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init':
drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function)
290 | (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT;
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: note: each undeclared identifier is reported only once for each function it appears in
drivers/net/ethernet/xscale/ptp_ixp46x.c: At top level:
drivers/net/ethernet/xscale/ptp_ixp46x.c:323:1: error: data definition has no type or storage class [-Werror]
323 | module_init(ptp_ixp_init);
I have patches to complete the transition for a future release, but
for the moment, add the missing include statements to get it to build
again.
Fixes: 09aa9aabdcc4 ("soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset")
intended to remove the call to ibmvnic_tx_scrq_flush() when the
->resetting flag is true and was tested that way. But during the final
rebase to net-next, the hunk got applied to a block few lines below
(which happened to have the same diff context) and the wrong call to
ibmvnic_tx_scrq_flush() got removed.
Fix that by removing the correct ibmvnic_tx_scrq_flush() and restoring
the one that was incorrectly removed.
Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In 93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous
cmdparser""), the parameters to intel_engine_cmd_parser() were altered
without updating the docs, causing Fi.CI.DOCS to start failing.
Fixes: c9d9fdbc108a ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"")
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720182108.2761496-1-jason@jlekstrand.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Added 'Fixes:' tag and corrected the hash for the ancestor]
(cherry picked from commit 15eb083bdb561bb4862cd04cd0523e55483e877e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Updated Fixes tag to match fixes branch]
|
|
sysfs_remove_link() causes a warning if the parent directory does not
exist. That can happen if the device link consumer has not been registered.
So do not attempt sysfs_remove_link() in that case.
Fixes: 287905e68dd29 ("driver core: Expose device link details in sysfs")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # 5.9+
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20210716114408.17320-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
rbd_open() and rbd_release() expect that disk->private_data is set to
rbd_dev. Otherwise we hit a NULL pointer dereference when mapping the
image.
URL: https://tracker.ceph.com/issues/51759
Fixes: 195b1956b85b ("rbd: use blk_mq_alloc_disk and blk_cleanup_disk")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
When registering the MDIO bus for a r8169 device, we use the PCI
bus/device specifier as a (seemingly) unique device identifier.
However the very same BDF number can be used on another PCI segment,
which makes the driver fail probing:
[ 27.544136] r8169 0002:07:00.0: enabling device (0000 -> 0003)
[ 27.559734] sysfs: cannot create duplicate filename '/class/mdio_bus/r8169-700'
....
[ 27.684858] libphy: mii_bus r8169-700 failed to register
[ 27.695602] r8169: probe of 0002:07:00.0 failed with error -22
Add the segment number to the device name to make it more unique.
This fixes operation on ARM N1SDP boards, with two boards connected
together to form an SMP system, and all on-board devices showing up
twice, just on different PCI segments. A similar issue would occur on
large systems with many PCI slots and multiple RTL8169 NICs.
Fixes: f1e911d5d0dfd ("r8169: add basic phylib support")
Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
[Andre: expand commit message, use pci_domain_nr()]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If driver_register() returns with error we need to free the memory
allocated for auxdrv->driver.name before returning from
__auxiliary_driver_register()
Fixes: 7de3697e9cbd4 ("Add auxiliary bus support")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210713093438.3173-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The qrtr-mhi client driver assumes that inbound buffers are
automatically allocated and queued by the MHI core, but this
doesn't happen for mhi pci devices since IPCR inbound channel is
not flagged with auto_queue, causing unusable IPCR (qrtr)
feature. Fix that.
Link: https://lore.kernel.org/r/1625736749-24947-1-git-send-email-loic.poulain@linaro.org
[mani: fixed a spelling mistake in commit description]
Fixes: 855a70c12021 ("bus: mhi: Add MHI PCI support for WWAN modems")
Cc: stable@vger.kernel.org #5.10
Reviewed-by: Hemant kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210716075106.49938-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
MHI reads the channel ID from the event ring element sent by the
device which can be any value between 0 and 255. In order to
prevent any out of bound accesses, add a check against the maximum
number of channels supported by the controller and those channels
not configured yet so as to skip processing of that event ring
element.
Link: https://lore.kernel.org/r/1624558141-11045-1-git-send-email-bbhatt@codeaurora.org
Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
Cc: stable@vger.kernel.org #5.10
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210716075106.49938-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Devices such as SDX24 do not have the provision for inband wake
doorbell in the form of channel 127 and instead have a sideband
GPIO for it. Newer devices such as SDX55 or SDX65 support inband
wake method by default. Ensure the functionality is used based on
this such that device wake stays held when a client driver uses
mhi_device_get() API or the equivalent debugfs entry.
Link: https://lore.kernel.org/r/1624560809-30610-1-git-send-email-bbhatt@codeaurora.org
Fixes: e3e5e6508fc1 ("bus: mhi: pci_generic: No-Op for device_wake operations")
Cc: stable@vger.kernel.org #5.12
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210716075106.49938-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Linus Torvalds
Rafael J. Wysocki
Dave Airlie
Greg Kroah-Hartman
Ioana Ciornei
Maxime Ripard
Randy Dunlap
Biju Das
Vladimir Oltean
Veerabadhran Gopalakrishnan
Stylon Wang
Aaron Liu
Lijo Lazar
Eric Yang
Bindu Ramamurthy
Nevenko Stupar
Mikita Lipski
Camille Cho
Nicholas Kazlauskas
Victor Lu
John Keeping
Arnd Bergmann
Sukadev Bhattiprolu
Jason Ekstrand
Adrian Hunter
Ilya Dryomov
Sayanta Pattanayak
Peter Ujfalusi
Loic Poulain
Bhaumik Bhatt