aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-09-09mmc: avoid getting CID on SDIO-only cardsDavid Vrabel1-3/+2
The introduction of support for SD combo cards breaks the initialization of all CSR SDIO chips. The GO_IDLE (CMD0) in mmc_sd_get_cid() causes CSR chips to be reset (this is non-standard behavior). When initializing an SDIO card check for a combo card by using the memory present bit in the R4 response to IO_SEND_OP_COND (CMD5). This avoids the call to mmc_sd_get_cid() on an SDIO-only card. Signed-off-by: David Vrabel <david.vrabel@csr.com> Acked-by: Michal Mirolaw <mirq-linux@rere.qmqm.pl> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-09Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-3/+3
* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits) ARM: Update mach-types ARM: Partially revert "Auto calculate ZRELADDR and provide option for exceptions" ARM: Ensure PTE modifications via dma_alloc_coherent are visible ARM: 6359/1: ep93xx: move clock initialization earlier Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()" ARM: 6352/1: perf: fix event validation ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7 ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARM ARM: 6330/1: perf: reword comments relating to perf_event_do_pending ARM: pxa168fb: fix section mismatch ARM: pxa: Make id const in pwm_probe() ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300 ARM: pxa: remove __init from cpufreq_driver->init() ARM: imx: set cache line size to 64 bytes for i.MX5 mx5/clock: fix clear bit fields issue in _clk_ccgr_disable function mxc/tzic: add base address when accessing TZIC registers ARM: mach-shmobile: ap4evb: fix write protect for SDHI1 ARM: mach-shmobile: ap4evb: modify FSI2 ID ARM: mach-shmobile: do not enable the PLLC2 clock on init ARM: mach-shmobile: Clock framework comment fix ...
2010-09-09Merge branch 'origin'Russell King98-894/+1274
2010-09-09Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds5-12/+27
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix hang with modified FIN handling on A0 cards RDMA/nes: Change state to closing after FIN RDMA/nes: Fix double CLOSE event indication crash RDMA/nes: Write correct register write to set TX pause param RDMA/cxgb3: Don't exceed the max HW CQ depth
2010-09-08Merge branches 'cxgb3' and 'nes' into for-linusRoland Dreier4-11/+26
2010-09-08RDMA/nes: Fix hang with modified FIN handling on A0 cardsFaisal Latif2-1/+3
Changing state to CLOSING when FIN is received causes A0 cards to hang. Fix this by checking for A0 cards in FIN handling. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-08RDMA/nes: Change state to closing after FINFaisal Latif1-1/+12
When the driver receives an AE for FIN received, it closes the connection without changing the state of the connection in the hardware to closing. By changing the state to closing, hardware will do a normal close sequence. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-08RDMA/nes: Fix double CLOSE event indication crashFaisal Latif1-8/+10
During a stress testing in a large cluster, multiple close event are detected and BUG() is hit in the iWARP core. The cause is that the active node gave up while waiting for an MPA response from the peer and tried to close the connection by sending RST. The passive node driver receives the RST but is waiting for MPA response from the user. When the MPA accept is received, the driver offloads the connection and sends a CLOSE event. The driver gets an AE indicating RESET received and also sends a CLOSE event, hitting a BUG(). Fix this by correcting RESET handling and sending CLOSE events. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-08RDMA/nes: Write correct register write to set TX pause paramChien Tung1-2/+2
Setting TX pause param writes to the wrong register location causing the adapter to hang. Correct the define used to write the reigster. Addresses: https://bugs.openfabrics.org/show_bug.cgi?id=2116 Reported-by: Shiri Franchi <shirif@voltaire.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-08Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds5-17/+28
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - fix device removal on unload Input: bcm5974 - adjust major/minor to scale Input: MT - initialize slots to unused Input: use PIT_TICK_RATE in vt beep ioctl Input: wacom - fix mousewheel handling for old wacom tablets
2010-09-08Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds2-15/+14
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Try to handle unknown nmis with an enabled PMU perf, x86: Fix handle_irq return values perf, x86: Fix accidentally ack'ing a second event on intel perf counter oprofile, x86: fix init_sysfs() function stub lockup_detector: Sync touch_*_watchdog back to old semantics tracing: Fix a race in function profile oprofile, x86: fix init_sysfs error handling perf_events: Fix time tracking for events with pid != -1 and cpu != -1 perf: Initialize callchains roots's childen hits oprofile: fix crash when accessing freed task structs
2010-09-07Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds19-277/+262
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: bus speed strings should be const PCI hotplug: Fix build with CONFIG_ACPI unset PCI: PCIe: Remove the port driver module exit routine PCI: PCIe: Move PCIe PME code to the pcie directory PCI: PCIe: Disable PCIe port services during port initialization PCI: PCIe: Ask BIOS for control of all native services at once ACPI/PCI: Negotiate _OSC control bits before requesting them ACPI/PCI: Do not preserve _OSC control bits returned by a query ACPI/PCI: Make acpi_pci_query_osc() return control bits ACPI/PCI: Reorder checks in acpi_pci_osc_control_set() PCI: PCIe: Introduce commad line switch for disabling port services PCI: PCIe AER: Introduce pci_aer_available() x86/PCI: only define pci_domain_nr if PCI and PCI_DOMAINS are set PCI: provide stub pci_domain_nr function for !CONFIG_PCI configs
2010-09-07Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds4-22/+12
* 'for-linus' of git://neil.brown.name/md: md: resolve confusion of MD_CHANGE_CLEAN md: don't clear MD_CHANGE_CLEAN in md_update_sb() for external arrays Move .gitignore from drivers/md to lib/raid6
2010-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: Revert "hwrng: n2-drv - remove casts from void*" crypto: testmgr - Default to no tests crypto: testmgr - Fix test disabling option crypto: hash - Fix handling of small unaligned buffers
2010-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds10-10/+16
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) pkt_sched: Fix lockdep warning on est_tree_lock in gen_estimator ipvs: avoid oops for passive FTP Revert "sky2: don't do GRO on second port" gro: fix different skb headrooms bridge: Clear INET control block of SKBs passed into ip_fragment(). 3c59x: Remove incorrect locking; correct documented lock hierarchy sky2: don't do GRO on second port ipv4: minor fix about RPF in help of Kconfig xfrm_user: avoid a warning with some compiler net/sched/sch_hfsc.c: initialize parent's cl_cfmin properly in init_vf() pxa168_eth: fix a mdiobus leak net sched: fix kernel leak in act_police vhost: stop worker only if created MAINTAINERS: Add ehea driver as Supported ath9k_hw: fix parsing of HT40 5 GHz CTLs ath9k_hw: Fix EEPROM uncompress block reading on AR9003 wireless: register wiphy rfkill w/o holding cfg80211_mutex netlink: Make NETLINK_USERSOCK work again. irda: Correctly clean up self->ias_obj on irda_bind() failure. wireless extensions: fix kernel heap content leak ...
2010-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds11-12/+59
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: wlan-ng: Explicitly set some fields in cfg80211 interface Staging: octeon: depends on NETDEVICES Staging: spectra: depend on X86_MRST Staging: zram: free device memory when init fails Staging: rt2870sta: Add more device IDs from vendor drivers staging: comedi das08_cs.c: Fix io_req_t conversion staging: spectra needs <linux/slab.h> staging: hv: Fixed lockup problem with bounce_buffer scatter list staging: hv: Increased storvsc ringbuffer and max_io_requests staging: hv: Fixed the value of the 64bit-hole inside ring buffer staging: hv: Fixed bounce kmap problem by using correct index staging: hv: Fix missing functions for net_device_ops
2010-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds13-85/+196
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: ftdi_sio: Added custom PIDs for ChamSys products USB: cdc-acm: Fixing crash when ACM probing interfaces with no endpoint descriptors. USB: cdc-acm: Add pseudo modem without AT command capabilities USB: cxacru: Use a bulk/int URB to access the command endpoint usb: serial: mos7840: Add USB IDs to support more B&B USB/RS485 converters. USB: cdc-acm: Adding second ACM channel support for various Nokia and one Samsung phones usb: serial: mos7840: Add USB ID to support the B&B Electronics USOPTL4-2P. USB: ssu100: turn off debug flag usb: allow drivers to use allocated bandwidth until unbound USB: cp210x usb driver: add USB_DEVICE for Pirelli DP-L10 mobile. USB: cp210x: Add B&G H3000 link cable ID USB: CP210x Add new device ID USB: option: fix incorrect novatel entries USB: Fix kernel oops with g_ether and Windows USB: rndis: section mismatch fix USB: ehci-ppc-of: problems in unwind USB: s3c-hsotg: Remove DEBUG define
2010-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds3-13/+6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: fix tty_line must not be equal to number of allocated tty pointers in tty driver serial: bfin_sport_uart: restore transmit frame sync fix serial: fix port type conflict between NS16550A & U6_16550A MAINTAINERS: orphan isicom vt: Fix console corruption on driver hand-over.
2010-09-07Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds4-9/+10
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: do not oops when erroneous PEB is scheduled for scrubbing UBI: fix kconfig unmet dependency UBI: fix forward compatibility UBI: eliminate update of list_for_each_entry loop cursor
2010-09-07Merge branch 'drm-intel-fixes' of git://anongit.freedesktop.org/~ickle/drm-intelLinus Torvalds17-286/+459
* 'drm-intel-fixes' of git://anongit.freedesktop.org/~ickle/drm-intel: (25 commits) intel_agp,i915: Add more sandybridge graphics device ids drm/i915: Enable MI_FLUSH on Sandybridge agp/intel: Fix cache control for Sandybridge agp/intel: use #ifdef idiom for intel-agp.h agp/intel: fix physical address mask bits for sandybridge drm/i915: Prevent double dpms on drm/i915: Avoid use of uninitialised values when disabling panel-fitter drm/i915: Avoid pageflipping freeze when we miss the flip prepare interrupt drm/i915: Tightly scope intel_encoder to prevent invalid use drm/i915: Allocate the PCI resource for the MCHBAR drm/i915/dp: Really try 5 times before giving up. drm/i915/sdvo: Restore guess of the DDC bus in absence of VBIOS drm/i915/dp: Boost timeout for enabling transcoder to 100ms drm/i915: Re-use set_base_atomic to share setting of the display registers drm/i915: Fix offset page-flips on i965+ drm/i915: Include a generation number in the device info i915: return -EFAULT if copy_to_user fails i915: return -EFAULT if copy_to_user fails agp/intel: Promote warning about failure to setup flush to error. drm/i915: overlay on gen2 can't address above 1G ...
2010-09-07intel_agp,i915: Add more sandybridge graphics device idsZhenyu Wang4-11/+30
New pci ids for GT2 and GT2+ on desktop and mobile sandybridge, and graphics device ids for server sandybridge. Also rename original ids string to reflect GT1 version. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Enable MI_FLUSH on SandybridgeZhenyu Wang2-2/+7
MI_FLUSH is being deprecated, but still available on Sandybridge. Make sure it's enabled as userspace still uses MI_FLUSH. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07agp/intel: Fix cache control for SandybridgeZhenyu Wang3-10/+42
Sandybridge GTT has new cache control bits in PTE, which controls graphics page cache in LLC or LLC/MLC, so we need to extend the mask function to respect the new bits. And set cache control to always LLC only by default on Gen6. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07agp/intel: use #ifdef idiom for intel-agp.hZhenyu Wang1-0/+4
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07agp/intel: fix physical address mask bits for sandybridgeZhenyu Wang1-2/+2
It should shift bit 39-32 into pte's bit 11-4. Reported-by:Takashi Iwai <tiwai@suse.de> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Prevent double dpms onChris Wilson1-1/+4
Arguably this is a bug in drm-core in that we should not be called twice in succession with DPMS_ON, however this is still occuring and we see FDI link training failures on the second call leading to the occassional blank display. For the time being ignore the repeated call. Original patch by Dave Airlie <airlied@redhat.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-07drm/i915: Avoid use of uninitialised values when disabling panel-fitterChris Wilson1-20/+15
We were passing garbage values into the panel-fitter control register when disabling it on Ironlake - those values (filter modes and reserved MBZ bits) would have then be re-used the next time panel-fitting was enabled. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Avoid pageflipping freeze when we miss the flip prepare interruptSimon Farnsworth4-12/+113
When we miss the flip prepare interrupt, we never get into the software state needed to restart userspace, resulting in a freeze of a full-screen OpenGL application (such as a compositor). Work around this by checking DSPxSURF/DSPxBASE to see if the page flip has actually happened. If it has, do the work we would have done when the flip prepare interrupt comes in. Also, add debugfs information to tell us what's going on (based on the patch from Chris Wilson attached to bugs.fdo bug #29798). Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Tightly scope intel_encoder to prevent invalid useChris Wilson1-13/+12
We reset intel_encoder for every matching encoder whilst iterating over the encoders attached to this crtc when changing mode. As such in a cloned configuration intel_encoder may not correspond to the correct is_edp encoder. By scoping intel_encoder to the loop, not only is the compiler able to spot this mistake, we also improve readiability for ourselves. [It might not be a mistake, within this function it is unclear as to whether it is permissable for eDP to be cloned...] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm/i915: Allocate the PCI resource for the MCHBARChris Wilson1-10/+10
We were failing when trying to allocate the resource for MMIO of the MCHBAR because we forgot to specify what type of resource we wanted. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-07drm/i915/dp: Really try 5 times before giving up.Chris Wilson1-30/+28
Only stop trying if the aux channel sucessfully reports that the transmission was completed, otherwise try again. On the 5th failure, bail and report that something is amiss. This fixes a sporadic failure in reading the EDID for my external panel over DP. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-07drm/i915/sdvo: Restore guess of the DDC bus in absence of VBIOSChris Wilson1-1/+39
If the VBIOS tells us the mapping of the SDVO device onto the DDC bus, use it. However, if there is no VBIOS available that mapping is uninitialised and we should fallback to our earlier guess. Fix regression introduced in b1083333 (which in turn is a fix for the regression caused by the introduction of this guess, 14571b4). References: Bug 29499 - [945GM] Screen disconnected because of missing VBIOS https://bugs.freedesktop.org/show_bug.cgi?id=29499 Bug 15109 - i945GM fails to detect EDID on DVI port https://bugzilla.kernel.org/show_bug.cgi?id=15109 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Paul Neumann <paul104x@yahoo.de> Cc: Adam Jackson <ajax@redhat.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org
2010-09-07drm/i915/dp: Boost timeout for enabling transcoder to 100msChris Wilson1-1/+1
Adam Hill reported that his Arrandale system required a much longer, up to 200x500us, wait for the panel to initialise or else modesetting would fail. References: https://bugs.freedesktop.org/show_bug.cgi?id=29141 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Adam Hill <sidepipeuk@yahoo.co.uk>
2010-09-07drm/i915: Re-use set_base_atomic to share setting of the display registersChris Wilson1-71/+9
Lets try to avoid repeating old bugs. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-07drm/i915: Fix offset page-flips on i965+Chris Wilson1-19/+48
i965 uses the Display Registers to compute the offset from the display base so the new base does not need adjusting when flipping. The older chipsets use a fence to access the display and so do perceive the surface as linear and have a single base register which is reprogrammed using the flip. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reported-by: Marty Jack <martyj19@comcast.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-07drm/i915: Include a generation number in the device infoChris Wilson2-54/+34
To simplify the IS_GEN[234] macros and to enable switching. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-06i915: return -EFAULT if copy_to_user failsDan Carpenter1-0/+1
copy_to_user() returns the number of bytes remaining to be copied and I'm pretty sure we want to return a negative error code here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-06i915: return -EFAULT if copy_to_user failsDan Carpenter1-3/+9
copy_to_user returns the number of bytes remaining to be copied, but we want to return a negative error code here. These are returned to userspace. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-06agp/intel: Promote warning about failure to setup flush to error.Chris Wilson1-4/+4
Make sure we always detect when we fail to correctly allocate the Isoch Flush Page and print an error to warn the user about the likely memory corruption that will result in invalid rendering or worse. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-06drm/i915: overlay on gen2 can't address above 1GDaniel Vetter1-0/+4
So set the coherent dma mask accordingly. This dma mask is only used for physical objects, so it won't really matter allocation-wise. Now this never really surfaced because sane 32bit kernels only have 1G of lowmem. But some eager testers (distros?) still carry around the patch to adjust lowmem via a kconfig option. And the kernel seems to favour high allocations on boot-up, hence the overlay blowing up reliably. Because the patch is tiny and nicely shows how broken gen2 is it's imho worth to merge despite the fact that mucking around with the lowmem/ highmem division is (no longer) supported. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28318 Cc: stable@kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-06drm/i915: Clear the vblank status bit before polling for the next vblankChris Wilson1-0/+16
The vblank status bit is a sticky bit that must be cleared with a write of '1' prior to polling for the next vblank. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> jbarnes: I'd still rather see a lock, but I think you're right that we don't generally wait in code that needs not to miss an interrupt. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-06i915: Fix spurious TV detection after 9d0498a2bf + 9559fcdbffPekka Enberg1-3/+6
Partial revert of 9d0498a2bf. Signed-off-by: Pekka Enberg <penberg@kernel.org> Tested-by: Hugh Dickins <hughd@google.com> Tested-by: Sven Joachim <svenjoac@gmx.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-06i915: revert some checks added by commit 32aad86fPavel Roskin1-16/+13
This fixes blur-like screen corruption on the following card: VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10) intel_sdvo_mode_set() should not return prematurely just because some features are not supported. https://bugzilla.kernel.org/show_bug.cgi?id=17151 Signed-off-by: Pavel Roskin <proski@gnu.org> Reported-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [ickle: Relax a couple more checks for failing LVDS modesetting] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-06Revert "drm/i915: Unreference object not handle on creation"Chris Wilson1-3/+6
This reverts commit 86f100b136626e91f4f66f3776303475e2e58998. The kref API requires the handlecount to be initialised to one on object creation (so that kref_get() doesn't complain upon first use) so the dalliance in the drivers is required in order to sink the initial floating reference. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-06drivers/gpu/drm/i915/intel_overlay.c needs seq_file.hAndrew Morton1-0/+2
drivers/gpu/drm/i915/intel_overlay.c: In function 'intel_overlay_print_error_state': drivers/gpu/drm/i915/intel_overlay.c:1467: error: implicit declaration of function 'seq_printf' Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16811 Reported-by: Martin Ziegler <ziegler@uni-freiburg.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@linux.ie> Cc: Andre Muller <andremuellerster@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-07drm: Do not force 1024x768 modes on unknown connectorsChris Wilson1-4/+3
Only fallback to a set of default modes on a connector iff that connector is known to be connected. The issue occurs that with limited hardware which cannot probe a connector and so reports the connector status as unknown will then attempt to retrieve the modes for it during drm_helper_probe_single_connector_modes(). Should that fail, the helper then generates a default set which fools the fb_helper and causes havoc with the console and beyond. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-07drm/kms: Add a module parameter to disable pollingChris Wilson1-2/+15
Polling for a VGA device on an old system can be quite expensive, causing latencies on the order of 600ms. As we hold the mode mutex for this time and also need the same mutex to move the cursor, we trigger a user-visible stall. The real solution would involve improving the granulatity of the locking and so perhaps performing some of the probing not under the lock or some other updates can be done under different locks. Also reducing the cost of probing for a non-existent monitor would be worthwhile. However, exposing a parameter to disable polling is a simple workaround in the meantime. In order to accommodate users turning polling on and off at runtime, the polling is potentially re-enabled on every probe. This is coupled to the user calling xrandr, which seems to be a vaild time to reset the polling timeout since the information on the connection has just been updated. (The presumption being that all connections are probed in a single xrandr pass, which is currently valid.) References: Bug 29536 - 2.6.35 causes ~600ms latency every 10s https://bugs.freedesktop.org/show_bug.cgi?id=29536 Bug 16265 - Why is kslowd accumulating so much CPU time? https://bugzilla.kernel.org/show_bug.cgi?id=16265 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-and-tested-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-07drm/radeon/kms: fix tv-out on avivo asicsAlex Deucher1-3/+23
digital underscan support regressed tv-out. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29985 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-07drm/radeon/kms/evergreen: fix gpu hangs in userspace accel codeAlex Deucher2-5/+39
These VGT regs need to be programmed via the ring rather than MMIO as on previous asics (r6xx/r7xx). Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-03Staging: wlan-ng: Explicitly set some fields in cfg80211 interfaceKarl Relton1-0/+3
The cfg80211 api has introduced a few new fields. Rather than assume what cfg80211 api does by default, set these explicitly. Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.