| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull SCSI fixes from James Bottomley:
"Four fixes and one spelling update, all in drivers: two in lpfc and
the rest in mp3sas, cxgbi and target"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target/iblock: Fix protection error with blocks greater than 512B
scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy()
scsi: lpfc: fix spelling mistakes of asynchronous
scsi: lpfc: fix build failure with DEBUGFS disabled
scsi: mpt3sas: Fix double free in attach error handling
|
|
Pull drm fixes from Dave Airlie:
"Post-xmas food coma recovery fixes. Only three fixes for i915 since I
expect most people are holidaying.
i915:
- power management rc6 fix
- framebuffer tracking fix
- display power management ratelimit fix"
* tag 'drm-fixes-2019-12-28' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Hold reference to intel_frontbuffer as we track activity
drm/i915/gt: Ratelimit display power w/a
drm/i915/pmu: Ensure monotonic rc6
|
|
Pull power management fixes from Rafael Wysocki:
"Fix compile test of the Tegra devfreq driver (Arnd Bergmann) and
remove redundant Kconfig dependencies from multiple devfreq drivers
(Leonard Crestez)"
* tag 'pm-5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: tegra: Add COMMON_CLK dependency
PM / devfreq: Drop explicit selection of PM_OPP
|
|
Pull libata fixes from Jens Axboe:
"Two things in here:
- First half of a series that fixes ahci_brcm, also marked for
stable. The other part of the series is going into 5.6 (Florian)
- sata_nv regression fix that is also marked for stable (Sascha)"
* tag 'libata-5.5-20191226' of git://git.kernel.dk/linux-block:
ata: ahci_brcm: Add missing clock management during recovery
ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE
ata: ahci_brcm: Fix AHCI resources management
ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()
libata: Fix retrieving of active qcs
|
|
Pull block fixes from Jens Axboe:
"Only thing here are the changes from Arnd from last week, which now
have the appropriate header include to ensure they actually compile if
COMPAT is enabled"
* tag 'block-5.5-20191226' of git://git.kernel.dk/linux-block:
compat_ioctl: block: handle Persistent Reservations
compat_ioctl: block: handle add zone open, close and finish ioctl
compat_ioctl: block: handle BLKGETZONESZ/BLKGETNRZONES
compat_ioctl: block: handle BLKREPORTZONE/BLKRESETZONE
pktcdvd: fix regression on 64-bit architectures
|
|
Pull GPIO fixes from Linus Walleij:
"A set of fixes for the v5.5 series:
- Fix the build for the Xtensa driver.
- Make sure to set up the parent device for mpc8xxx.
- Clarify the look-up error message.
- Fix the usage of the line direction in the mockup device.
- Fix a type warning on the Aspeed driver.
- Remove the pointless __exit annotation on the xgs-iproc which is
causing a compilation problem.
- Fix up emultation of open drain outputs .get_direction()
- Fix the IRQ callbacks on the PCA953xx to use bitops and work
properly.
- Fix the Kconfig on the Tegra driver"
* tag 'gpio-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: tegra186: Allow building on Tegra194-only configurations
gpio: pca953x: Switch to bitops in IRQ callbacks
gpiolib: fix up emulated open drain outputs
MAINTAINERS: Append missed file to the database
gpio: xgs-iproc: remove __exit annotation for iproc_gpio_remove
gpio: aspeed: avoid return type warning
gpio: mockup: Fix usage of new GPIO_LINE_DIRECTION
gpio: Fix error message on out-of-range GPIO in lookup table
gpio: mpc8xxx: Add platform device to gpiochip->parent
gpio: xtensa: fix driver build
|
|
The downstream implementation of ahci_brcm.c did contain clock
management recovery, but until recently, did that outside of the
libahci_platform helpers and this was unintentionally stripped out while
forward porting the patch upstream.
Add the missing clock management during recovery and sleep for 10
milliseconds per the design team recommendations to ensure the SATA PHY
controller and AFE have been fully quiesced.
Fixes: eb73390ae241 ("ata: ahci_brcm: Recover from failures to identify devices")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set AHCI_HFLAG_DELAY_ENGINE for the BCM7425 AHCI controller thus making
it conforming to the 'strict' AHCI implementation which this controller
is based on.
This solves long link establishment with specific hard drives (e.g.:
Seagate ST1000VM002-9ZL1 SC12) that would otherwise have to complete the
error recovery handling before finally establishing a succesful SATA
link at the desired speed.
We re-order the hpriv->flags assignment to also remove the NONCQ quirk
since we can set the flag directly.
Fixes: 9586114cf1e9 ("ata: ahci_brcmstb: add support MIPS-based platforms")
Fixes: 423be77daabe ("ata: ahci_brcmstb: add quirk for broken ncq")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The AHCI resources management within ahci_brcm.c is a little
convoluted, largely because it historically had a dedicated clock that
was managed within this file in the downstream tree. Once brough
upstream though, the clock was left to be managed by libahci_platform.c
which is entirely appropriate.
This patch series ensures that the AHCI resources are fetched and
enabled before any register access is done, thus avoiding bus errors on
platforms which clock gate the controller by default.
As a result we need to re-arrange the suspend() and resume() functions
in order to avoid accessing registers after the clocks have been turned
off respectively before the clocks have been turned on. Finally, we can
refactor brcm_ahci_get_portmask() in order to fetch the number of ports
from hpriv->mmio which is now accessible without jumping through hoops
like we used to do.
The commit pointed in the Fixes tag is both old and new enough not to
require major headaches for backporting of this patch.
Fixes: eba68f829794 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5
("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are
going to need ahci_platform_{enable,disable}_phys() in a subsequent
commit for ahci_brcm.c in order to properly control the PHY
initialization order.
Also make sure the function prototypes are declared in
include/linux/ahci_platform.h as a result.
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ata_qc_complete_multiple() is called with a mask of the still active
tags.
mv_sata doesn't have this information directly and instead calculates
the still active tags from the started tags (ap->qc_active) and the
finished tags as (ap->qc_active ^ done_mask)
Since 28361c40368 the hw_tag and tag are no longer the same and the
equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is
initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is
started and this will be in done_mask on completion. ap->qc_active ^
done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as
the internal tag will never be reported as completed.
This is fixed by introducing ata_qc_get_active() which returns the
active hardware tags and calling it where appropriate.
This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same
problem. There is another case in sata_nv that most likely needs fixing
as well, but this looks a little different, so I wasn't confident enough
to change that.
Fixes: 28361c403683 ("libata: add extra internal command")
Cc: stable@vger.kernel.org
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add missing export of ata_qc_get_active(), as per Pali.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since obj->frontbuffer is no longer protected by the struct_mutex, as we
are processing the execbuf, it may be removed. Mark the
intel_frontbuffer as rcu protected, and so acquire a reference to
the struct as we track activity upon it.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/827
Fixes: 8e7cb1799b4f ("drm/i915: Extract intel_frontbuffer active tracking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218104043.3539458-1-chris@chris-wilson.co.uk
(cherry picked from commit da42104f589d979bbe402703fd836cec60befae1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
For very light workloads that frequently park, acquiring the display
power well (required to prevent the dmc from trashing the system) takes
longer than the execution. A good example is the igt_coherency selftest,
which is slowed down by an order of magnitude in the worst case with
powerwell cycling. To prevent frequent cycling, while keeping our fast
soft-rc6, use a timer to delay release of the display powerwell.
Fixes: 311770173fac ("drm/i915/gt: Schedule request retirement when timeline idles")
References: https://gitlab.freedesktop.org/drm/intel/issues/848
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218093504.3477048-1-chris@chris-wilson.co.uk
(cherry picked from commit 81ff52b705775433a955b2746d37b87bdc89a3d0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid rc6 counter going backward in close to 0% RC6 scenarios like:
15.005477996 114,246,613 ns i915/rc6-residency/
16.005876662 667,657 ns i915/rc6-residency/
17.006131417 7,286 ns i915/rc6-residency/
18.006615031 18,446,744,073,708,914,688 ns i915/rc6-residency/
19.007158361 18,446,744,073,709,447,168 ns i915/rc6-residency/
20.007806498 0 ns i915/rc6-residency/
21.008227495 1,440,403 ns i915/rc6-residency/
There are two aspects to this fix.
First is not assuming rc6 value zero means GT is asleep since that can
also mean GPU is fully busy and we do not want to enter the estimation
path in that case.
Second is ensuring monotonicity on the estimation path itself. I suspect
what is happening is with extremely rapid park/unpark cycles we get no
updates on the real rc6 and therefore have to careful not to
unconditionally trust use last known real rc6 when creating a new
estimation.
v2:
* Simplify logic by not tracking the estimate but last reported value.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 16ffe73c186b ("drm/i915/pmu: Use GT parked for estimating RC6 while asleep")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217142057.1000-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit df6a42053513846475ae1fbd224dfbdbcd0c7010)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Compile-testing this driver fails if CONFIG_COMMON_CLK is not set:
drivers/devfreq/tegra30-devfreq.o: In function `tegra_devfreq_target':
tegra30-devfreq.c:(.text+0x164): undefined reference to `clk_set_min_rate'
Fixes: 35f8dbc72721 ("PM / devfreq: tegra: Enable COMPILE_TEST for the driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
CONFIG_PM_OPP is already selected by CONFIG_PM_DEVFREQ
since commit b9c69e043266 ("PM / devfreq: Add dependency on PM_OPP").
This means that individual drivers shouldn't "select PM_OPP" explicitly.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[cw00.choi: Edit the patch title]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Pull block fixes from Jens Axboe:
"Let's try this one again, this time without the compat_ioctl changes.
We've got those fixed up, but that can go out next week.
This contains:
- block queue flush lockdep annotation (Bart)
- Type fix for bsg_queue_rq() (Bart)
- Three dasd fixes (Stefan, Jan)
- nbd deadlock fix (Mike)
- Error handling bio user map fix (Yang)
- iocost fix (Tejun)
- sbitmap waitqueue addition fix that affects the kyber IO scheduler
(David)"
* tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block:
sbitmap: only queue kyber's wait callback if not already active
block: fix memleak when __blk_rq_map_user_iov() is failed
s390/dasd: fix typo in copyright statement
s390/dasd: fix memleak in path handling error case
s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly
block: Fix a lockdep complaint triggered by request queue flushing
block: Fix the type of 'sts' in bsg_queue_rq()
block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT
nbd: fix shutdown and recv work deadlock v2
iocost: over-budget forced IOs should schedule async delay
|
|
Pull RISC-V fixes from Paul Walmsley:
"Several fixes, and one cleanup, for RISC-V.
Fixes:
- Fix an error in a Kconfig file that resulted in an undefined
Kconfig option "CONFIG_CONFIG_MMU"
- Fix undefined Kconfig option "CONFIG_CONFIG_MMU"
- Fix scratch register clearing in M-mode (affects nommu users)
- Fix a mismerge on my part that broke the build for
CONFIG_SPARSEMEM_VMEMMAP users
Cleanup:
- Move SiFive L2 cache-related code to drivers/soc, per request"
* tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: move sifive_l2_cache.c to drivers/soc
riscv: define vmemmap before pfn_to_page calls
riscv: fix scratch register clearing in M-mode.
riscv: Fix use of undefined config option CONFIG_CONFIG_MMU
|
|
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
|
|
The support for the compat ioctl did not actually do what it was
supposed to do because of a typo, instead it broke native support for
CDROM_LAST_WRITTEN and CDROM_SEND_PACKET on all architectures with
CONFIG_COMPAT enabled.
Fixes: 1b114b0817cc ("pktcdvd: add compat_ioctl handler")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
Please apply for v5.5, I just noticed the regression while
rebasing some of the patches I created on top.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull xen fixes from Juergen Gross:
"This contains two cleanup patches and a small series for supporting
reloading the Xen block backend driver"
* tag 'for-linus-5.5b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/grant-table: remove multiple BUG_ON on gnttab_interface
xen-blkback: support dynamic unbind/bind
xen/interface: re-define FRONT/BACK_RING_ATTACH()
xenbus: limit when state is forced to closed
xenbus: move xenbus_dev_shutdown() into frontend code...
xen/blkfront: Adjust indentation in xlvbd_alloc_gendisk
|
|
Pull powerpc fixes from Michael Ellerman:
"Two weeks worth of accumulated fixes:
- A fix for a performance regression seen on PowerVM LPARs using
dedicated CPUs, caused by our vcpu_is_preempted() returning true
even for idle CPUs.
- One of the ultravisor support patches broke KVM on big endian hosts
in v5.4.
- Our KUAP (Kernel User Access Prevention) code missed allowing
access in __clear_user(), which could lead to an oops or erroneous
SEGV when triggered via PTRACE_GETREGSET.
- Two fixes for the ocxl driver, an open/remove race, and a memory
leak in an error path.
- A handful of other small fixes.
Thanks to: Andrew Donnellan, Christian Zigotzky, Christophe Leroy,
Christoph Hellwig, Daniel Axtens, David Hildenbrand, Frederic Barrat,
Gautham R. Shenoy, Greg Kurz, Ihor Pasichnyk, Juri Lelli, Marcus
Comstedt, Mike Rapoport, Parth Shah, Srikar Dronamraju, Vaidyanathan
Srinivasan"
* tag 'powerpc-5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix regression on big endian hosts
powerpc: Fix __clear_user() with KUAP enabled
powerpc/pseries/cmm: fix managed page counts when migrating pages between zones
powerpc/8xx: fix bogus __init on mmu_mapin_ram_chunk()
ocxl: Fix potential memory leak on context creation
powerpc/irq: fix stack overflow verification
powerpc: Ensure that swiotlb buffer is allocated from low memory
powerpc/shared: Use static key to detect shared processor
powerpc/vcpu: Assume dedicated processors as non-preempt
ocxl: Fix concurrent AFU open and device removal
|
|
Pull clk fixes from Stephen Boyd:
"One core framework fix to walk the orphan list and match up clks to
parents when clk providers register the DT provider after registering
all their clks (as they should).
Then a handful of driver fixes for the qcom, imx, and at91 drivers.
The driver fixes are relatively small fixes for incorrect register
settings or missing locks causing race conditions"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: Avoid SMMU/cx gdsc corner cases
clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCs
clk: Move clk_core_reparent_orphans() under CONFIG_OF
clk: at91: fix possible deadlock
clk: walk orphan list on clock provider registration
clk: imx: pll14xx: fix clk_pll14xx_wait_lock
clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table
clk: imx: clk-composite-8m: add lock to gate/mux
|
|
Correct a mismatch between rx_page_buf_step and the actual step size
used when filling buffer pages.
This patch fixes the page overrun that occured when the MTU was set to
anything bigger than 1692.
Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues")
Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was possible for channel allocation logic to get confused between what
it had and what it wanted, and end up trying to use the same channel for
both PTP and regular TX. This led to a kernel panic:
BUG: unable to handle page fault for address: 0000000000047635
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0-rc3-ehc14+ #900
Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013
RIP: 0010:native_queued_spin_lock_slowpath+0x188/0x1e0
Code: f3 90 48 8b 32 48 85 f6 74 f6 eb e8 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 c0 98 02 00 48 03 04 f5 a0 c6 ed 81 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32
RSP: 0018:ffffc90000003d28 EFLAGS: 00010006
RAX: 0000000000047635 RBX: 0000000000000246 RCX: 0000000000040000
RDX: ffff888627a298c0 RSI: 0000000000003ffe RDI: ffff88861f6b8dd4
RBP: ffff8886225c6e00 R08: 0000000000040000 R09: 0000000000000000
R10: 0000000616f080c6 R11: 00000000000000c0 R12: ffff88861f6b8dd4
R13: ffffc90000003dc8 R14: ffff88861942bf00 R15: ffff8886150f2000
FS: 0000000000000000(0000) GS:ffff888627a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000047635 CR3: 000000000200a000 CR4: 00000000000006f0
Call Trace:
<IRQ>
_raw_spin_lock_irqsave+0x22/0x30
skb_queue_tail+0x1b/0x50
sock_queue_err_skb+0x9d/0xf0
__skb_complete_tx_timestamp+0x9d/0xc0
efx_dequeue_buffer+0x126/0x180 [sfc]
efx_xmit_done+0x73/0x1c0 [sfc]
efx_ef10_ev_process+0x56a/0xfe0 [sfc]
? tick_sched_do_timer+0x60/0x60
? timerqueue_add+0x5d/0x70
? enqueue_hrtimer+0x39/0x90
efx_poll+0x111/0x380 [sfc]
? rcu_accelerate_cbs+0x50/0x160
net_rx_action+0x14a/0x400
__do_softirq+0xdd/0x2d0
irq_exit+0xa0/0xb0
do_IRQ+0x53/0xe0
common_interrupt+0xf/0xf
</IRQ>
In the long run we intend to rewrite the channel allocation code, but for
'net' fix this by allocating extra_channels, and giving them TX queues,
even if we do not in fact need them (e.g. on NICs without MAC TX
timestamping), and thereby using simpler logic to assign the channels
once they're allocated.
Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In existing code, the receive indirection table, rx_table, is in
struct rndis_device, which will be reset when changing MTU, ringparam,
etc. User configured receive indirection table values will be lost.
To fix this, move rx_table to struct net_device_context, and check
netif_is_rxfh_configured(), so rx_table will be set to default only
if no user configured value.
Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PHY IDs are 32-bit unsigned quantities. Ensure that they are always
treated as such, and not passed around as "int"s.
Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") introduced
a regression in driver that when xdp program is installed on
qede device, device's aggregation feature (hardware GRO) is not
getting disabled, which is unexpected with xdp.
Fixes: 18c602dee472 ("qede: Use NETIF_F_GRO_HW.")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Issue 1:
--------
Reproduction steps:
1. sudo ethtool -C eth0 rx-usecs 128
2. sudo ethtool -C eth0 adaptive-rx on
3. sudo ethtool -C eth0 adaptive-rx off
4. ethtool -c eth0
expected output: rx-usecs 128
actual output: rx-usecs 0
Reason for issue:
In stage 3, ethtool userspace calls first the ena_get_coalesce() handler
to get the current value of all properties, and then the ena_set_coalesce()
handler. When ena_get_coalesce() is called the adaptive interrupt
moderation is still on. There is an if in the code that returns the
rx_coalesce_usecs only if the adaptive interrupt moderation is off.
And since it is still on, rx_coalesce_usecs is not set, meaning it
stays 0.
Solution to issue:
Remove this if static interrupt moderation intervals have nothing to do
with dynamic ones.
Issue 2:
--------
Reproduction steps:
1. sudo ethtool -C eth0 adaptive-rx on
2. sudo ethtool -C eth0 rx-usecs 128
3. ethtool -c eth0
expected output: rx-usecs 128
actual output: rx-usecs 0
Reason for issue:
In stage 2, when ena_set_coalesce() is called, the handler tests if
rx adaptive interrupt moderation is on, and if it is, it returns before
getting to the part in the function that sets the rx non-adaptive
interrupt moderation interval.
Solution to issue:
Remove the return from the function when rx adaptive interrupt moderation
is on.
Also cleaned up the fixed code in ena_set_coalesce by grouping together
adaptive interrupt moderation toggling, and using && instead of nested
ifs.
Fixes: b3db86dc4b82 ("net: ena: reimplement set/get_coalesce()")
Fixes: 0eda847953d8 ("net: ena: fix retrieval of nonadaptive interrupt moderation intervals")
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current default non-adaptive tx interrupt moderation interval is 196 us.
This value is too high and might cause the tx queue to fill up.
In this commit we set the default non-adaptive tx interrupt moderation
interval to 64 us in order to:
1. Reduce the probability of the queue filling-up (when compared to the
current default value of 196 us).
2. Reduce unnecessary tx interrupt overhead (which happens if we set the
default tx interval to 0).
We determined experimentally that 64 us is an optimal value that
reduces interrupt rate by more than 20% without affecting performance.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current implementation of "stmmac_dt_phy" function initializes
the MDIO platform bus data, even in the absence of PHY. This fix
will skip MDIO initialization if there is no PHY present.
Fixes: 7437127 ("net: stmmac: Convert to phylink and remove phylib logic")
Acked-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Sriram Dash <sriram.dash@samsung.com>
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When doing stress test, we get the following trace:
kernel BUG at lib/dynamic_queue_limits.c:26!
Internal error: Oops - BUG: 0 [#1] SMP ARM
Modules linked in: hip04_eth
CPU: 0 PID: 2003 Comm: tDblStackPcap0 Tainted: G O L 4.4.197 #1
Hardware name: Hisilicon A15
task: c3637668 task.stack: de3bc000
PC is at dql_completed+0x18/0x154
LR is at hip04_tx_reclaim+0x110/0x174 [hip04_eth]
pc : [<c041abfc>] lr : [<bf0003a8>] psr: 800f0313
sp : de3bdc2c ip : 00000000 fp : c020fb10
r10: 00000000 r9 : c39b4224 r8 : 00000001
r7 : 00000046 r6 : c39b4000 r5 : 0078f392 r4 : 0078f392
r3 : 00000047 r2 : 00000000 r1 : 00000046 r0 : df5d5c80
Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 32c5387d Table: 1e189b80 DAC: 55555555
Process tDblStackPcap0 (pid: 2003, stack limit = 0xde3bc190)
Stack: (0xde3bdc2c to 0xde3be000)
[<c041abfc>] (dql_completed) from [<bf0003a8>] (hip04_tx_reclaim+0x110/0x174 [hip04_eth])
[<bf0003a8>] (hip04_tx_reclaim [hip04_eth]) from [<bf0012c0>] (hip04_rx_poll+0x20/0x388 [hip04_eth])
[<bf0012c0>] (hip04_rx_poll [hip04_eth]) from [<c04c8d9c>] (net_rx_action+0x120/0x374)
[<c04c8d9c>] (net_rx_action) from [<c021eaf4>] (__do_softirq+0x218/0x318)
[<c021eaf4>] (__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac)
[<c021eea0>] (irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4)
[<c0240130>] (msa_irq_exit) from [<c0267ba8>] (__handle_domain_irq+0x110/0x148)
[<c0267ba8>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118)
[<c0201588>] (gic_handle_irq) from [<c0558360>] (__irq_svc+0x40/0x58)
Exception stack(0xde3bdde0 to 0xde3bde28)
dde0: 00000000 00008001 c3637668 00000000 00000000 a00f0213 dd3627a0 c0af6380
de00: c086d380 a00f0213 c0a22a50 de3bde6c 00000002 de3bde30 c0558138 c055813c
de20: 600f0213 ffffffff
[<c0558360>] (__irq_svc) from [<c055813c>] (_raw_spin_unlock_irqrestore+0x44/0x54)
Kernel panic - not syncing: Fatal exception in interrupt
Pre-modification code:
int hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
[...]
[1] priv->tx_head = TX_NEXT(tx_head);
[2] count++;
[3] netdev_sent_queue(ndev, skb->len);
[...]
}
An rx interrupt occurs if hip04_mac_start_xmit just executes to the line 2,
tx_head has been updated, but corresponding 'skb->len' has not been
added to dql_queue.
And then
hip04_mac_interrupt->__napi_schedule->hip04_rx_poll->hip04_tx_reclaim
In hip04_tx_reclaim, because tx_head has been updated,
bytes_compl will plus an additional "skb-> len"
which has not been added to dql_queue. And then
trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed).
To solve the problem described above, we put
"netdev_sent_queue(ndev, skb->len);"
before
"priv->tx_head = TX_NEXT(tx_head);"
Fixes: a41ea46a9a12 ("net: hisilicon: new hip04 ethernet driver")
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ENOTSUPP is not uapi, use EOPNOTSUPP instead.
Fixes: d66cb37e9664 ("qeth: Add new priority queueing options")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When managing the promiscuous mode during an RX modeset, qeth caches the
current HW state to avoid repeated programming of the same state on each
modeset.
But while tearing down a device, we forget to clear the cached state. So
when the device is later set online again, the initial RX modeset
doesn't program the promiscuous mode since we believe it is already
enabled.
Fix this by clearing the cached state in the tear-down path.
Note that for the SBP variant of promiscuous mode, this accidentally
works right now because we unconditionally restore the SBP role while
re-initializing.
Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Along with z/VM NICs, there's additional device types that only support
a specific transport mode (eg. external-bridged IQD).
Identify the corresponding error code, and raise a fitting error message
so that the user knows to adjust their device configuration.
On top of that also fix the subsequent error path, so that the rejected
cmd doesn't need to wait for a timeout but gets cancelled straight away.
Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Properly initialize refcount to 1 when hardware queue arrays for
TC-MQPRIO offload have been freshly allocated. Otherwise, following
warning is observed. Also fix up error path to only free hardware
queue arrays when refcount reaches 0.
[ 130.075342] ------------[ cut here ]------------
[ 130.075343] refcount_t: addition on 0; use-after-free.
[ 130.075355] WARNING: CPU: 0 PID: 10870 at lib/refcount.c:25
refcount_warn_saturate+0xe1/0x100
[ 130.075356] Modules linked in: sch_mqprio iptable_nat ib_iser
libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_umad iw_cxgb4 libcxgb
ib_uverbs x86_pkg_temp_thermal cxgb4 igb
[ 130.075361] CPU: 0 PID: 10870 Comm: tc Kdump: loaded Not tainted
5.5.0-rc1+ #11
[ 130.075362] Hardware name: Supermicro
X9SRE/X9SRE-3F/X9SRi/X9SRi-3F/X9SRE/X9SRE-3F/X9SRi/X9SRi-3F, BIOS 3.2
01/16/2015
[ 130.075363] RIP: 0010:refcount_warn_saturate+0xe1/0x100
[ 130.075364] Code: e8 14 41 c1 ff 0f 0b c3 80 3d 44 f4 10 01 00 0f 85
63 ff ff ff 48 c7 c7 38 9f 83 8c 31 c0 c6 05 2e f4 10 01 01 e8 ef 40 c1
ff <0f> 0b c3 48 c7 c7 10 9f 83 8c 31 c0 c6 05 17 f4 10 01 01 e8 d7 40
[ 130.075365] RSP: 0018:ffffa48d00c0b768 EFLAGS: 00010286
[ 130.075366] RAX: 0000000000000000 RBX: 0000000000000008 RCX:
0000000000000001
[ 130.075366] RDX: 0000000000000001 RSI: 0000000000000096 RDI:
ffff8a2e9fa187d0
[ 130.075367] RBP: ffff8a2e93890000 R08: 0000000000000398 R09:
000000000000003c
[ 130.075367] R10: 00000000000142a0 R11: 0000000000000397 R12:
ffffa48d00c0b848
[ 130.075368] R13: ffff8a2e94746498 R14: ffff8a2e966f7000 R15:
0000000000000031
[ 130.075368] FS: 00007f689015f840(0000) GS:ffff8a2e9fa00000(0000)
knlGS:0000000000000000
[ 130.075369] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 130.075369] CR2: 00000000006762a0 CR3: 00000007cf164005 CR4:
00000000001606f0
[ 130.075370] Call Trace:
[ 130.075377] cxgb4_setup_tc_mqprio+0xbee/0xc30 [cxgb4]
[ 130.075382] ? cxgb4_ethofld_restart+0x50/0x50 [cxgb4]
[ 130.075384] ? pfifo_fast_init+0x7e/0xf0
[ 130.075386] mqprio_init+0x5f4/0x630 [sch_mqprio]
[ 130.075389] qdisc_create+0x1bf/0x4a0
[ 130.075390] tc_modify_qdisc+0x1ff/0x770
[ 130.075392] rtnetlink_rcv_msg+0x28b/0x350
[ 130.075394] ? rtnl_calcit.isra.32+0x110/0x110
[ 130.075395] netlink_rcv_skb+0xc6/0x100
[ 130.075396] netlink_unicast+0x1db/0x330
[ 130.075397] netlink_sendmsg+0x2f5/0x460
[ 130.075399] ? _copy_from_user+0x2e/0x60
[ 130.075400] sock_sendmsg+0x59/0x70
[ 130.075401] ____sys_sendmsg+0x1f0/0x230
[ 130.075402] ? copy_msghdr_from_user+0xd7/0x140
[ 130.075403] ___sys_sendmsg+0x77/0xb0
[ 130.075404] ? ___sys_recvmsg+0x84/0xb0
[ 130.075406] ? __handle_mm_fault+0x377/0xaf0
[ 130.075407] __sys_sendmsg+0x53/0xa0
[ 130.075409] do_syscall_64+0x44/0x130
[ 130.075412] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 130.075413] RIP: 0033:0x7f688f13af10
[ 130.075414] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff
eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24
[ 130.075414] RSP: 002b:00007ffe6c7d9988 EFLAGS: 00000246 ORIG_RAX:
000000000000002e
[ 130.075415] RAX: ffffffffffffffda RBX: 00000000006703a0 RCX:
00007f688f13af10
[ 130.075415] RDX: 0000000000000000 RSI: 00007ffe6c7d99f0 RDI:
0000000000000003
[ 130.075416] RBP: 000000005df38312 R08: 0000000000000002 R09:
0000000000008000
[ 130.075416] R10: 00007ffe6c7d93e0 R11: 0000000000000246 R12:
0000000000000000
[ 130.075417] R13: 00007ffe6c7e9c50 R14: 0000000000000001 R15:
000000000067c600
[ 130.075418] ---[ end trace 8fbb3bf36a8671db ]---
v2:
- Move the refcount_set() closer to where the hardware queue arrays
are being allocated.
- Fix up error path to only free hardware queue arrays when refcount
reaches 0.
Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull arm64 fixes from Catalin Marinas:
- Leftover put_cpu() in the perf/smmuv3 error path.
- Add Hisilicon TSV110 to spectre-v2 safe list
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpu_errata: Add Hisilicon TSV110 to spectre-v2 safe list
perf/smmuv3: Remove the leftover put_cpu() in error path
|
|
Pull drm fixes from Dave Airlie:
"Probably the last one before Christmas, I'll see if there is much
demand over next few weeks for more fixes, I expect it'll be quiet
enough.
This has one exynos fix, and a bunch of i915 core and i915 GVT fixes.
Summary:
exynos:
- component delete fix
i915:
- Fix to drop an unused and harmful display W/A
- Fix to define EHL power wells independent of ICL
- Fix for priority inversion on bonded requests
- Fix in mmio offset calculation of DSB instance
- Fix memory leak from get_task_pid when banning clients
- Fixes to avoid dereference of uninitialized ops in dma_fence
tracing and keep reference to execbuf object until submitted.
- vGPU state setting locking fix (Zhenyu)
- Fix vGPU display dmabuf as read-only (Zhenyu)
- Properly handle vGPU display dmabuf page pin when rendering (Tina)
- Fix one guest boot warning to handle guc reset state (Fred)"
* tag 'drm-fixes-2019-12-21' of git://anongit.freedesktop.org/drm/drm:
drm/exynos: gsc: add missed component_del
drm/i915: Fix pid leak with banned clients
drm/i915/gem: Keep request alive while attaching fences
drm/i915: Fix WARN_ON condition for cursor plane ddb allocation
drm/i915/gvt: Fix guest boot warning
drm/i915/tgl: Drop Wa#1178
drm/i915/ehl: Define EHL powerwells independently of ICL
drm/i915: Set fence_work.ops before dma_fence_init
drm/i915: Copy across scheduler behaviour flags across submit fences
drm/i915/dsb: Fix in mmio offset calculation of DSB instance
drm/i915/gvt: Pin vgpu dma address before using
drm/i915/gvt: set guest display buffer as readonly
drm/i915/gvt: use vgpu lock for active state setting
|
|
- Fix to drop an unused and harmful display W/A
- Fix to define EHL power wells independent of ICL
- Fix for priority inversion on bonded requests
- Fix in mmio offset calculation of DSB instance
- Fix memory leak from get_task_pid when banning clients
- Fixes to avoid dereference of uninitialized ops in dma_fence tracing
and keep reference to execbuf object until submitted.
- Includes gvt-fixes-2019-12-18
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219124635.GA16068@jlahtine-desk.ger.corp.intel.com
|
|
coypright -> copyright
Reported-by: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If for whatever reason the dasd_eckd_check_characteristics() function
exits after at least some paths have their configuration data
allocated those data is never freed again. In the error case the
device->private pointer is set to NULL and dasd_eckd_uncheck_device()
will exit without freeing the path data because of this NULL pointer.
Fix by calling dasd_eckd_clear_conf_data() for error cases.
Also use dasd_eckd_clear_conf_data() in dasd_eckd_uncheck_device()
to avoid code duplication.
Reported-by: Qian Cai <cai@lca.pw>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The max data count (mdc) is an unsigned 16-bit integer value as per AR
documentation and is received via ccw_device_get_mdc() for a specific
path mask from the CIO layer. The function itself also always returns a
positive mdc value or 0 in case mdc isn't supported or couldn't be
determined.
Though, the comment for this function describes a negative return value
to indicate failures.
As a result, the DASD device driver interprets the return value of
ccw_device_get_mdc() incorrectly. The error case is essentially a dead
code path.
To fix this behaviour, check explicitly for a return value of 0 and
change the comment for ccw_device_get_mdc() accordingly.
This fix merely enables the error code path in the DASD functions
get_fcx_max_data() and verify_fcx_max_data(). The actual functionality
stays the same and is still correct.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull iommu fixes from Joerg Roedel:
- Fix kmemleak warning in IOVA code
- Fix compile warnings on ARM32/64 in dma-iommu code due to dma_mask
type mismatches
- Make ISA reserved regions relaxable, so that VFIO can assign devices
which have such regions defined
- Fix mapping errors resulting in IO page-faults in the VT-d driver
- Make sure direct mappings for a domain are created after the default
domain is updated
- Map ISA reserved regions in the VT-d driver with correct permissions
- Remove unneeded check for PSI capability in the IOTLB flush code of
the VT-d driver
- Lockdep fix iommu_dma_prepare_msi()
* tag 'iommu-fixes-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/dma: Relax locking in iommu_dma_prepare_msi()
iommu/vt-d: Remove incorrect PSI capability check
iommu/vt-d: Allocate reserved region for ISA with correct permission
iommu: set group default domain before creating direct mappings
iommu/vt-d: Fix dmar pte read access not set error
iommu/vt-d: Set ISA bridge reserved region as relaxable
iommu/dma: Rationalise types for DMA masks
iommu/iova: Init the struct iova to fix the possible memleak
|
|
Pull x86 platform driver fixes from Andy Shevchenko:
"Bucket of fixes for PDx86. Note, that there is no ABI breakage in
Mellanox driver because it has been introduced in v5.5-rc1, so we can
change it.
Summary:
- Add support of APUv4 and fix an assignment of simswap GPIO
- Add Siemens CONNECT X300 to DMI table to avoid stuck during boot
- Correct arguments of WMI call on HP Envy x360 15-cp0xxx model
- Fix the mlx-bootctl sysfs attributes to be device related"
* tag 'platform-drivers-x86-v5.5-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: pcengines-apuv2: Spelling fixes in the driver
platform/x86: pcengines-apuv2: detect apuv4 board
platform/x86: pcengines-apuv2: fix simswap GPIO assignment
platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI table
platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes
platform/mellanox: fix the mlx-bootctl sysfs
|
|
Pull MMC host fixes from Ulf Hansson:
- mtk-sd: Fix tuning for MT8173 HS200/HS400 mode
- sdhci: Revert a fix for incorrect switch to HS mode
- sdhci-msm: Fixup accesses to the DDR_CONFIG register
- sdhci-of-esdhc: Revert a bad fix for erratum A-009204
- sdhci-of-esdhc: Re-implement fix for erratum A-009204
- sdhci-of-esdhc: Fixup P2020 errata handling
- sdhci-pci: Disable broken CMDQ on Intel GLK based Lenovo systems
* tag 'mmc-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-esdhc: re-implement erratum A-009204 workaround
mmc: sdhci: Add a quirk for broken command queuing
mmc: sdhci: Workaround broken command queuing on Intel GLK
mmc: sdhci-of-esdhc: fix P2020 errata handling
mmc: sdhci: Update the tuning failed messages to pr_debug level
mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support"
mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode
mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register
Revert "mmc: sdhci: Fix incorrect switch to HS mode"
|
|
Pull char/misc driver fixes from Greg KH:
"Here are some small char and other driver fixes for 5.5-rc3.
The most noticable one is a much-reported fix for a random driver
issue that came up from 5.5-rc1 compat_ioctl cleanups. The others are
a chunk of habanalab driver fixes and intel_th driver fixes and new
device ids.
All have been in linux-next with no reported issues"
* tag 'char-misc-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
random: don't forget compat_ioctl on urandom
intel_th: msu: Fix window switching without windows
intel_th: Fix freeing IRQs
intel_th: pci: Add Elkhart Lake SOC support
intel_th: pci: Add Comet Lake PCH-V support
habanalabs: remove variable 'val' set but not used
habanalabs: rate limit error msg on waiting for CS
|
|
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for a number of reported
issues.
The majority here are some fixes for the wfx driver, but also in here
is a comedi driver fix found during some code review, and an axis-fifo
build dependancy issue to resolve some reported testing problems.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wfx: fix wrong error message
staging: wfx: fix hif_set_mfp() with big endian hosts
staging: wfx: detect race condition in WEP authentication
staging: wfx: ensure that retry policy always fallbacks to MCS0 / 1Mbps
staging: wfx: fix rate control handling
staging: wfx: firmware does not support more than 32 total retries
staging: wfx: use boolean appropriately
staging: wfx: fix counter overflow
staging: wfx: fix case of lack of tx_retry_policies
staging: wfx: fix the cache of rate policies on interface reset
staging: axis-fifo: add unspecified HAS_IOMEM dependency
staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value
|
|
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.5-rc3.
Only four small patches here:
- atmel serial driver fix
- msm_serial driver fix
- sprd serial driver fix
- tty core port fix
The last tty core fix should resolve a long-standing bug with a race
at port creation time that some people would see, and Sudip finally
tracked down.
All of these have been in linux-next with no reported issues"
* tag 'tty-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty/serial: atmel: fix out of range clock divider handling
tty: link tty and port before configuring it as console
serial: sprd: Add clearing break interrupt operation
tty: serial: msm_serial: Fix lockup for sysrq and oops
|
|
Pull USB fixes from Greg KH:
"Here are some small USB fixes for some reported issues.
Included in here are:
- xhci build warning fix
- ehci disconnect warning fix
- usbip lockup fix and error cleanup fix
- typec build fix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: Fix build warning seen with CONFIG_PM=n
usbip: Fix error path of vhci_recv_ret_submit()
usbip: Fix receive error in vhci-hcd when using scatter-gather
USB: EHCI: Do not return -EPIPE when hub is disconnected
usb: typec: fusb302: Fix an undefined reference to 'extcon_get_state'
|
|
Pull pin control fixes from Linus Walleij:
"Sorry that this fixes pull request took a while. Too much christmas
business going on.
This contains a few really important Intel fixes and some odd fixes:
- A host of fixes for the Intel baytrail and cherryview: properly
serialize all register accesses and add the irqchip with the
gpiochip as we need to, fix some pin lists and initialize the
hardware in the right order.
- Fix the Aspeed G6 LPC configuration.
- Handle a possible NULL pointer exception in the core.
- Fix the Kconfig dependencies for the Equilibrium driver"
* tag 'pinctrl-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ingenic: Fixup PIN_CONFIG_OUTPUT config
pinctrl: Modify Kconfig to fix linker error
pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpio
pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
pinctrl: cherryview: Pass irqchip when adding gpiochip
pinctrl: cherryview: Add GPIO <-> pin mapping ranges via callback
pinctrl: cherryview: Split out irq hw-init into a separate helper function
pinctrl: baytrail: Pass irqchip when adding gpiochip
pinctrl: baytrail: Add GPIO <-> pin mapping ranges via callback
pinctrl: baytrail: Update North Community pin list
pinctrl: baytrail: Really serialize all register accesses
|
Linus Torvalds
Florian Fainelli
Sascha Hauer
Chris Wilson
Tvrtko Ursulin
Arnd Bergmann
Leonard Crestez
Charles McLachlan
Edward Cree
Haiyang Zhang
Russell King
Manish Chopra
Arthur Kiyanovski
Padmanabhan Rajanbabu
Jiangfeng Xiao
Julian Wiedmann
Rahul Lakkireddy
Dave Airlie
Stefan Haberland
Jan Höppner