aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-10-07s390/qeth: optimize MAC handling in rx_mode callbackLakhvich Dmitriy2-45/+111
In layer2 mode of the qeth driver, MAC address lists from struct net_device require mapping to the OSA-card. The existing implementation is inefficient for lists with more than several MAC addresses, since for every ndo_set_rx_mode callback it removes all MAC addresses first, and then registers the current MAC address list. This patch changes implementation of ndo_set_rx_mode callback in qeth, only performing hardware registration/removal for new/deleted addresses. To shorten lookup of MAC addresses registered addresses are kept in a hashtable instead of a linear list. Signed-off-by: Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Reviewed-by: Thomas Richter <tmricht@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07s390/qeth: switch to napi_gro_receiveThomas Richter1-1/+1
Add support for GRO (generic receive offload) in the layer 2 part of device driver qeth. This results in a performance improvement when GRO and RX is turned on. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add source address lookup op for VRFDavid Ahern1-0/+35
Add operation to l3mdev to lookup source address for a given flow. Add support for the operation to VRF driver and convert existing IPv4 hooks to use the new lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add netif_is_l3_slaveDavid Ahern1-6/+4
IPv6 addrconf keys off of IFF_SLAVE so can not use it for L3 slave. Add a new private flag and add netif_is_l3_slave function for checking it. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Rename FLOWI_FLAG_VRFSRC to FLOWI_FLAG_L3MDEV_SRCDavid Ahern1-2/+2
Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07gianfar: Add WAKE_UCAST and "wake-on-filer" supportClaudiu Manoil3-24/+186
This enables eTSEC's filer (Rx parser) and the FGPI Rx interrupt (Filer General Purpose Interrupt) as a wakeup source event. Upon entering suspend state, the eTSEC filer is given a rule to match incoming L2 unicast packets. A packet matching the rule will be enqueued in the Rx ring and a FGPI Rx interrupt will be asserted by the filer to wakeup the system. Other packet types will be dropped. On resume the filer table is restored to the content before entering suspend state. The set of rules from gfar_filer_config_wol() could be extended to implement other WoL capabilities as well. The "fsl,wake-on-filer" DT binding enables this capability on certain platforms that feature the necessary power management infrastructure, targeting mainly printing and imaging applications. (refer to Power Management section of the SoC Ref Man) Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: mv88e6xxx: remove link pollingRussell King6-72/+0
The link status is polled by the generic phy layer, there's no need to duplicate that polling with additional polling. This additional polling adds additional MDIO traffic, and races with the generic phy layer, resulting in missing or duplicated link status messages. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-06Revert "regmap: Allow installing custom reg_update_bits function"David S. Miller2-28/+0
This reverts commit 7741c373cf3ea1f5383fa97fb7a640a429d3dd7c.
2015-10-06Revert "net: Microchip encx24j600 driver"David S. Miller5-2122/+0
This reverts commit 04fbfce7a222327b97ca165294ef19f0faa45960.
2015-10-06Revert "net: encx24j600_exit() can be static"David S. Miller1-1/+1
This reverts commit 9886ce2b9d4e5a8bb3d78d0f7eff3c0f1ed58d67.
2015-10-05asix: Continue processing URB if no RX netdev bufferDean Jenkins1-12/+19
Avoid a loss of synchronisation of the Ethernet Data header 32-bit word due to a failure to get a netdev socket buffer. The ASIX RX handling algorithm returned 0 upon a failure to get an allocation of a netdev socket buffer. This causes the URB processing to stop which potentially causes a loss of synchronisation with the Ethernet Data header 32-bit word. Therefore, subsequent processing of URBs may be rejected due to a loss of synchronisation. This may cause additional good Ethernet frames to be discarded along with outputting of synchronisation error messages. Implement a solution which checks whether a netdev socket buffer has been allocated before trying to copy the Ethernet frame into the netdev socket buffer. But continue to process the URB so that synchronisation is maintained. Therefore, only a single Ethernet frame is discarded when no netdev socket buffer is available. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Mark Craske <Mark_Craske@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05asix: On RX avoid creating bad Ethernet framesDean Jenkins1-0/+28
When RX Ethernet frames span multiple URB socket buffers, the data stream may suffer a discontinuity which will cause the current Ethernet frame in the netdev socket buffer to be incomplete. This frame needs to be discarded instead of appending unrelated data from the current URB socket buffer to the Ethernet frame in the netdev socket buffer. This avoids creating a corrupted Ethernet frame in the netdev socket buffer. A discontinuity can occur when the previous URB socket buffer held an incomplete Ethernet frame due to truncation or a URB socket buffer containing the end of the Ethernet frame was missing. Therefore, add a sanity test for when an Ethernet frame spans multiple URB socket buffers to check that the remaining bytes of the currently received Ethernet frame point to a good Data header 32-bit word of the next Ethernet frame. Upon error, reset the remaining bytes variable to zero and discard the current netdev socket buffer. Assume that the Data header is located at the start of the current socket buffer and attempt to process the next Ethernet frame from there. This avoids unnecessarily discarding a good URB socket buffer that contains a new Ethernet frame. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Mark Craske <Mark_Craske@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05asix: Simplify asix_rx_fixup_internal() netdev allocDean Jenkins1-9/+7
The code is checking that the Ethernet frame will fit into a netdev allocated socket buffer within the constraints of MTU size, Ethernet header length plus VLAN header length. The original code was checking rx->remaining each loop of the while loop that processes multiple Ethernet frames per URB and/or Ethernet frames that span across URBs. rx->remaining decreases per while loop so there is no point in potentially checking multiple times that the Ethernet frame (remaining part) will fit into the netdev socket buffer. The modification checks that the size of the Ethernet frame will fit the netdev socket buffer before allocating the netdev socket buffer. This avoids grabbing memory and then deciding that the Ethernet frame is too big and then freeing the memory. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Mark Craske <Mark_Craske@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05asix: Tidy-up 32-bit header word synchronisationDean Jenkins1-15/+13
Tidy-up the Data header 32-bit word synchronisation logic in asix_rx_fixup_internal() by removing redundant logic tests. The code is looking at the following cases of the Data header 32-bit word that is present before each Ethernet frame: a) all 32 bits of the Data header word are in the URB socket buffer b) first 16 bits of the Data header word are at the end of the URB socket buffer c) last 16 bits of the Data header word are at the start of the URB socket buffer eg. split_head = true Note that the lifetime of rx->split_head exists outside of the function call and is accessed per processing of each URB. Therefore, split_head being true acts on the next URB to be processed. To check for b) the offset will be 16 bits (2 bytes) from the end of the buffer then indicate split_head is true. To check for c) split_head must be true because the first 16 bits have been found. To check for a) else c) Note that the || logic of the old code included the state (skb->len - offset == sizeof(u16) && rx->split_head) which is not possible because the split_head cannot be true whilst checking for b). This is because the split_head indicates that the first 16 bits have been found and that is not possible whilst checking for the first 16 bits. Therefore simplify the logic. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Mark Craske <Mark_Craske@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05asix: Rename remaining and size for clarityDean Jenkins2-21/+22
The Data header synchronisation is easier to understand if the variables "remaining" and "size" are renamed. Therefore, the lifetime of the "remaining" variable exists outside of asix_rx_fixup_internal() and is used to indicate any remaining pending bytes of the Ethernet frame that need to be obtained from the next socket buffer. This allows an Ethernet frame to span across multiple socket buffers. "size" is now local to asix_rx_fixup_internal() and contains the size read from the Data header 32-bit word. Add "copy_length" to hold the number of the Ethernet frame bytes (maybe a part of a full frame) that are to be copied out of the socket buffer. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Mark Craske <Mark_Craske@mentor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05vrf: fix a kernel warningWANG Cong1-1/+1
This fixes: tried to remove device ip6gre0 from (null) ------------[ cut here ]------------ kernel BUG at net/core/dev.c:5219! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 3 PID: 161 Comm: kworker/u8:2 Not tainted 4.3.0-rc2+ #1142 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff8800d784a9c0 ti: ffff8800d74a4000 task.ti: ffff8800d74a4000 RIP: 0010:[<ffffffff817f0797>] [<ffffffff817f0797>] __netdev_adjacent_dev_remove+0x40/0xec RSP: 0018:ffff8800d74a7a98 EFLAGS: 00010282 RAX: 000000000000002a RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88011adcf701 RSI: ffff88011adccbf8 RDI: ffff88011adccbf8 RBP: ffff8800d74a7ab8 R08: 0000000000000001 R09: 0000000000000000 R10: ffffffff81d190ff R11: 00000000ffffffff R12: ffff8800d599e7c0 R13: 0000000000000000 R14: ffff8800d599e890 R15: ffffffff82385e00 FS: 0000000000000000(0000) GS:ffff88011ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007ffd6f003000 CR3: 000000000220c000 CR4: 00000000000006e0 Stack: 0000000000000000 ffff8800d599e7c0 0000000000000b00 ffff8800d599e8a0 ffff8800d74a7ad8 ffffffff817f0861 0000000000000000 ffff8800d599e7c0 ffff8800d74a7af8 ffffffff817f088f 0000000000000000 ffff8800d599e7c0 Call Trace: [<ffffffff817f0861>] __netdev_adjacent_dev_unlink+0x1e/0x35 [<ffffffff817f088f>] __netdev_adjacent_dev_unlink_neighbour+0x17/0x41 [<ffffffff817f56e6>] netdev_upper_dev_unlink+0x6c/0x13d [<ffffffff81674a3d>] vrf_del_slave+0x26/0x7d [<ffffffff81674ac3>] vrf_device_event+0x2f/0x34 [<ffffffff81098c40>] notifier_call_chain+0x75/0x9c [<ffffffff81098fa2>] raw_notifier_call_chain+0x14/0x16 [<ffffffff817ee129>] call_netdevice_notifiers_info+0x52/0x59 [<ffffffff817f179d>] call_netdevice_notifiers+0x13/0x15 [<ffffffff817f6f18>] rollback_registered_many+0x14f/0x24f [<ffffffff817f70f2>] unregister_netdevice_many+0x19/0x64 [<ffffffff819a2455>] ip6gre_exit_net+0x163/0x177 [<ffffffff817eb019>] ops_exit_list+0x44/0x55 [<ffffffff817ebcb7>] cleanup_net+0x193/0x226 [<ffffffff81091e1c>] process_one_work+0x26c/0x4d8 [<ffffffff81091d20>] ? process_one_work+0x170/0x4d8 [<ffffffff81092296>] worker_thread+0x1df/0x2c2 [<ffffffff810920b7>] ? process_scheduled_works+0x2f/0x2f [<ffffffff810920b7>] ? process_scheduled_works+0x2f/0x2f [<ffffffff81097a20>] kthread+0xd4/0xdc [<ffffffff810bc523>] ? trace_hardirqs_on_caller+0x17d/0x199 [<ffffffff8109794c>] ? __kthread_parkme+0x83/0x83 [<ffffffff81a5240f>] ret_from_fork+0x3f/0x70 [<ffffffff8109794c>] ? __kthread_parkme+0x83/0x83 Fixes: 93a7e7e837af ("net: Remove the now unused vrf_ptr") Cc: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: encx24j600_exit() can be statickbuild test robot1-1/+1
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: Microchip encx24j600 driverJon Ringle5-0/+2122
This ethernet driver supports the Micorchip enc424j600/626j600 Ethernet controller over a SPI bus interface. This driver makes use of the regmap API to optimize access to registers by caching registers where possible. Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/39935b.pdf Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05regmap: Allow installing custom reg_update_bits functionJon Ringle2-0/+28
This commit allows installing a custom reg_update_bits function for cases where the hardware provides a mechanism to set or clear register bits without a read/modify/write cycle. Such is the case with the Microchip ENCX24J600. Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05enic: do hang reset only in case of tx timeoutGovindarajulu Varadarajan4-3/+40
The current code invokes hang reset in case of error interrupt. We should hang reset only in case of tx timeout. This because of the way hang reset is implemented in firmware. Hang reset takes more firmware resources than soft reset. Adaptor does not generate error interrupt in case of tx timeout. Hang reset only in case of tx timeout, in .ndo_tx_timeout. Do soft reset otherwise. Introduce deferred work, enic_tx_hang_reset, to do hang reset. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05enic: handle spurious error interruptGovindarajulu Varadarajan1-5/+9
Some of the enic adaptors are know to generate spurious interrupts. When error interrupt is generated, driver just resets the device. This patch resets the device only when an error is occurred. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05cxgb4: Report correct link speed for unsupported onesHariprasad Shenai1-1/+5
When we get garbage from the firmware with weird Port Speeds, etc. we should emit a warning regarding unsupported speeds rather than use the bogus default of "10Mbps" which isn't even an option in the firmware Port Information message Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05cxgb4: Adds a new Device Log Facility FW_DEVLOG_FACILITY_CFHariprasad Shenai1-0/+1
The firmware team added a new Device Log Facility FW_DEVLOG_FACILITY_CF, but the driver has been decoding Device Log messages with that Facility as "(NULL)", fixing it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05cxgb4: For T4, don't read the Firmware Mailbox Control registerHariprasad Shenai1-6/+14
T4 doesn't have the Shadow copy of the register which we can read without side effect. So don't read mbox control register for T4 adapter Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05cxgb4 : Update T4/T5/T6 register rangesHariprasad Shenai1-330/+1134
Update T4/T5/T6 adapter register ranges so that it doesn't read non existent registers when dumped using ethtool Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Remove the XGBE_LINK state bitLendacky, Thomas2-13/+4
The XGBE_LINK bit is used just to determine whether to call the netif_carrier_on/off functions. Rather than define and use this bit, just call the functions. The netif_carrier_ok function can be used in place of checking the XGBE_LINK bit in the future. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Use device workqueue instead of system workqueueLendacky, Thomas1-5/+6
The driver creates, flushes and destroys a device workqueue but queues work to the system workqueue. Switch from using the system workqueue to the device workqueue. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Add receive buffer unavailable statisticLendacky, Thomas3-0/+5
Add a statistic that tracks how many times an interrupt is generated for a receive buffer not being available to the hardware which prevents the hardware from being able to DMA the received data. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Simplify calculation and setting of queue fifosLendacky, Thomas2-83/+14
The calculation of the Tx and Rx fifo sizes can be calculated rather than hardcoded in a switch statement. Additionally, the per-queue fifo sizes can be calculated rather than hardcoded using if/else if statements that can possibly underutilize the available fifo area. Change the code to calculate the fifo sizes and the per-queue fifo sizes to simplify the code and make best use of the available fifo. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Add ethtool error and debug messagesLendacky, Thomas1-52/+37
Add error and dynamic debug messages to various ethtool functions in the driver while also removing the DBGPR debug print calls. Also, change the message level for some error messages from alert to err. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Add ethtool support for setting the msglevelLendacky, Thomas1-0/+16
Provide the ethtool functions to support getting and setting the msglevel for the driver. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Use proper DT / ACPI precedence checkingLendacky, Thomas1-1/+1
Device tree presence takes precedence over ACPI in the device_* APIs. The amd-xgbe driver should follow the same precedence. Update the check on whether to use DT / ACPI to follow this. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05amd-xgbe: Remove an unneeded semicolon on a switch statementLendacky, Thomas1-1/+1
Remove an unneeded semicolon at the end of a switch statement block. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05mwifiex: avoid gettimeofday in ba_threshold settingArnd Bergmann1-11/+4
mwifiex_get_random_ba_threshold() uses a complex homegrown implementation to generate a pseudo-random number from the current time as returned from do_gettimeofday(). This currently requires two 32-bit divisions plus a couple of other computations that are eventually discarded as only eight bits of the microsecond portion are used at all. We could replace this with a call to get_random_bytes(), but that might drain the entropy pool too fast if this is called for each packet. Instead, this patch converts it to use ktime_get_ns(), which is a bit faster than do_gettimeofday(), and then uses a similar algorithm as before, but in a way that takes both the nanosecond and second portion into account for slightly-more-but-still-not-very-random pseudorandom number. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Amitkumar Karwar <akarwar@marvell.com> Cc: Nishant Sarmukadam <nishants@marvell.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05mwifiex: use ktime_get_real for timestampingArnd Bergmann1-3/+1
The mwifiex_11n_aggregate_pkt() function creates a ktime_t from a timeval returned by do_gettimeofday, which is slow and causes an overflow in 2038 on 32-bit architectures. This solves both problems by using the appropriate ktime_get_real() function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Amitkumar Karwar <akarwar@marvell.com> Cc: Nishant Sarmukadam <nishants@marvell.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: igb: avoid using timespecArnd Bergmann3-13/+14
We want to deprecate the use of 'struct timespec' on 32-bit architectures, as it is will overflow in 2038. The igb driver uses it to read the current time, and can simply be changed to use ktime_get_real_ts64() instead. Because of hardware limitations, there is still an overflow in year 2106, which we cannot really avoid, but this documents the overflow. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: intel-wired-lan@lists.osuosl.org Reviewed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: stmmac: avoid using timespecArnd Bergmann1-3/+5
We want to deprecate the use of 'struct timespec' on 32-bit architectures, as it is will overflow in 2038. The stmmac driver uses it to read the current time, and can simply be changed to use ktime_get_real_ts64() instead. Because of hardware limitations, there is still an overflow in year 2106, which we cannot really avoid, but this documents the overflow. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05net: fec: avoid timespec useArnd Bergmann1-4/+2
The fec_ptp_enable_pps uses an open-coded implementation of ns_to_timespec, which will be removed eventually as it is not y2038-safe on 32-bit architectures. Two more instances of the same code in this file were already converted to use the safe ns_to_timespec64 in commit 6630514fcee ("ptp: fec: use helpers for converting ns to timespec"), this changes the last one as well. The seconds portion here is actually unused and we could just remove the timespec variable, but using ns_to_timespec64 can still be better as the implementation can be hand-optimized in the future. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Fugang Duan <b38611@freescale.com> Cc: Luwei Zhou <b45643@freescale.com> Cc: Frank Li <Frank.Li@freescale.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03i40evf: don't blow away MAC addressMitch Williams1-0/+2
Under certain circumstances, we can get an extra VF_RESOURCES message from the PF driver at runtime. When this happens, we need to parse it because our VSI may have changed out from underneath us, and that will affect our relationship with the PF driver. However, parsing the resources message also blows away our current MAC address in the hardware struct, usually with all zeros. When this happens, the next time the interface is opened, it will have no MAC address and will a) not work and b) complain. Fix this issue by restoring the current MAC address from the netdev struct after we parse the resource message. Change-ID: I6cd1b624fc20432f81dc901166c8de195b8e0e65 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-03i40e/i40evf: grab the AQ spinlocks before clearing registersShannon Nelson2-44/+46
Make sure we have the spinlocks before we clear the ARQ and ASQ management registers. Also, widen the locked portion and make a sanity check earlier in the send function to be sure we're working with safe register values. Change-ID: I34b56044b33461ed780f3d2de8d62826cdf933f9 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-03i40e: Fix a memory leak in X722 rss config pathAnjali Singhai1-1/+3
In any case free the memory allocated before exiting. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-03i40evf: Use numa_mem_id() to better support memoryless nodeJiang Liu1-1/+1
Function i40e_clean_rx_irq() tries to reuse memory pages allocated from the nearest node. To better support memoryless node, use numa_mem_id() instead of numa_node_id() to get the nearest node with memory. This change should only affect performance. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-03i40e: Use numa_mem_id() to better support memoryless nodeJiang Liu1-1/+1
Function i40e_clean_rx_irq() tries to reuse memory pages allocated from the nearest node. To better support memoryless node, use numa_mem_id() instead of numa_node_id() to get the nearest node with memory. This change should only affect performance. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-03ravb: Add support for r8a7795 SoCKazuya Mizuguchi2-8/+62
This patch supports the r8a7795 SoC by: - Using two interrupts + One for E-MAC + One for everything else + Both can be handled by the existing common interrupt handler, which affords a simpler update to support the new SoC. In future some consideration may be given to implementing multiple interrupt handlers - Limiting the phy speed to 100Mbit/s for the new SoC; at this time it is not clear how this restriction may be lifted but I hope it will be possible as more information comes to light Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [horms: reworked] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03ravb: Provide dev parameter to DMA APIKazuya Mizuguchi1-19/+19
This patch is in preparation for using this driver on arm64 where the implementation of __dma_alloc_coherent fails if a device parameter is not provided. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> [horms: squashed into a single patch] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03phylib: Add phy_set_max_speed helperSimon Horman1-19/+40
Add a helper to allow ethernet drivers to limit the speed of a phy (that they are attached to). This mainly involves factoring out the business-end of of_set_phy_supported() and exporting a new symbol. This code seems to be open coded in several places, in several different variants. It is is envisaged that this will be used in situations where setting the "max-speed" property in DT is not appropriate, e.g. because the maximum speed is not a property of the phy hardware. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: push object ID back to object structureJiri Pirko1-6/+3
Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: bring back switchdev_obj and use it as a generic object paramJiri Pirko1-16/+25
Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename switchdev_obj_fdb to switchdev_obj_port_fdbJiri Pirko1-3/+3
Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename switchdev_obj_vlan to switchdev_obj_port_vlanJiri Pirko1-3/+3
Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>