path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-02-22Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds28-534/+697
Pull s390 updates from Martin Schwidefsky: - New entropy generation for the pseudo random number generator. - Early boot printk output via sclp to help debug crashes on boot. This needs to be enabled with a kernel parameter. - Add proper no-execute support with a bit in the page table entry. - Bug fixes and cleanups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (65 commits) s390/syscall: fix single stepped system calls s390/zcrypt: make ap_bus explicitly non-modular s390/zcrypt: Removed unneeded debug feature directory creation. s390: add missing "do {} while (0)" loop constructs to multiline macros s390/mm: add cond_resched call to kernel page table dumper s390: get rid of MACHINE_HAS_PFMF and MACHINE_HAS_HPAGE s390/mm: make memory_block_size_bytes available for !MEMORY_HOTPLUG s390: replace ACCESS_ONCE with READ_ONCE s390: Audit and remove any remaining unnecessary uses of module.h s390: mm: Audit and remove any unnecessary uses of module.h s390: kernel: Audit and remove any unnecessary uses of module.h s390/kdump: Use "LINUX" ELF note name instead of "CORE" s390: add no-execute support s390: report new vector facilities s390: use correct input data address for setup_randomness s390/sclp: get rid of common response code handling s390/sclp: don't add new lines to each printed string s390/sclp: make early sclp code readable s390/sclp: disable early sclp code as soon as the base sclp driver is active s390/sclp: move early printk code to drivers ...
2017-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1003-26707/+65110
Pull networking updates from David Miller: "Highlights: 1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini Varadhan. 2) Simplify classifier state on sk_buff in order to shrink it a bit. From Willem de Bruijn. 3) Introduce SIPHASH and it's usage for secure sequence numbers and syncookies. From Jason A. Donenfeld. 4) Reduce CPU usage for ICMP replies we are going to limit or suppress, from Jesper Dangaard Brouer. 5) Introduce Shared Memory Communications socket layer, from Ursula Braun. 6) Add RACK loss detection and allow it to actually trigger fast recovery instead of just assisting after other algorithms have triggered it. From Yuchung Cheng. 7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot. 8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert. 9) Export MPLS packet stats via netlink, from Robert Shearman. 10) Significantly improve inet port bind conflict handling, especially when an application is restarted and changes it's setting of reuseport. From Josef Bacik. 11) Implement TX batching in vhost_net, from Jason Wang. 12) Extend the dummy device so that VF (virtual function) features, such as configuration, can be more easily tested. From Phil Sutter. 13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric Dumazet. 14) Add new bpf MAP, implementing a longest prefix match trie. From Daniel Mack. 15) Packet sample offloading support in mlxsw driver, from Yotam Gigi. 16) Add new aquantia driver, from David VomLehn. 17) Add bpf tracepoints, from Daniel Borkmann. 18) Add support for port mirroring to b53 and bcm_sf2 drivers, from Florian Fainelli. 19) Remove custom busy polling in many drivers, it is done in the core networking since 4.5 times. From Eric Dumazet. 20) Support XDP adjust_head in virtio_net, from John Fastabend. 21) Fix several major holes in neighbour entry confirmation, from Julian Anastasov. 22) Add XDP support to bnxt_en driver, from Michael Chan. 23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan. 24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi. 25) Support GRO in IPSEC protocols, from Steffen Klassert" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits) Revert "ath10k: Search SMBIOS for OEM board file extension" net: socket: fix recvmmsg not returning error from sock_error bnxt_en: use eth_hw_addr_random() bpf: fix unlocking of jited image when module ronx not set arch: add ARCH_HAS_SET_MEMORY config net: napi_watchdog() can use napi_schedule_irqoff() tcp: Revert "tcp: tcp_probe: use spin_lock_bh()" net/hsr: use eth_hw_addr_random() net: mvpp2: enable building on 64-bit platforms net: mvpp2: switch to build_skb() in the RX path net: mvpp2: simplify MVPP2_PRS_RI_* definitions net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT net: mvpp2: remove unused register definitions net: mvpp2: simplify mvpp2_bm_bufs_add() net: mvpp2: drop useless fields in mvpp2_bm_pool and related code net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue' net: mvpp2: release reference to txq_cpu[] entry after unmapping net: mvpp2: handle too large value in mvpp2_rx_time_coal_set() net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set() net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set ...
2017-02-21Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds1-1/+2
Pull HID fix from Jiri Kosina: "Regression fix for HID_RMI-driven synaptics touchpads in !CONFIG_HID_RMI cases" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: rmi: fallback to generic/multitouch if hid-rmi is not built
2017-02-21Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds23-187/+608
Pull libata updates from Tejun Heo: - Bartlomiej added pata_falcon - Christoph is trying to remove use of static 4k buf. It's still WIP - config cleanup around HAS_DMA - other fixes and driver-specific changes * 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (29 commits) ata: pata_of_platform: using of_property_read_u32() helper pata_atiixp: Don't use unconnected secondary port on SB600/SB700 libata-sff: Don't scan disabled ports when checking for legacy mode. pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode() ahci: qoriq: added ls2088a platforms support ahci: qoriq: report error when ecc register address is missing in dts ahci: qoriq: added a condition to enable dma coherence Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf" ahci: imx: fix building without hwmon or thermal ata: add Atari Falcon PATA controller driver ata: pass queued command to ->sff_data_xfer method ata: allow subsystem to be used on m68k arch libata: switch to dynamic allocation instead of ata_scsi_rbuf libata: don't call ata_scsi_rbuf_fill for command without a response buffer libata: call ->scsi_done from ata_scsi_simulate libata: remove the done callback from ata_scsi_args libata: move struct ata_scsi_args to libata-scsi.c libata: avoid global response buffer in atapi_qc_complete libata-eh: Use switch() instead of sparse array for protocol strings ata: sata_mv: Convert to devm_ioremap_resource() ...
2017-02-21Merge tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds12-116/+309
Pull dmaengine updates from Vinod Koul: "This time we fairly boring and bit small update. - Support for Intel iDMA 32-bit hardware - deprecate broken support for channel switching in async_tx - bunch of updates on stm32-dma - Cyclic support for zx dma and making in generic zx dma driver - Small updates to bunch of other drivers" * tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits) async_tx: deprecate broken support for channel switching dmaengine: rcar-dmac: Widen DMA mask to 40 bits dmaengine: sun6i: allow build on ARM64 platforms (sun50i) dmaengine: Provide a wrapper for memcpy operations dmaengine: zx: fix build warning dmaengine: dw: we do support Merrifield SoC in PCI mode dmaengine: dw: add support of iDMA 32-bit hardware dmaengine: dw: introduce register mappings for iDMA 32-bit dmaengine: dw: introduce block2bytes() and bytes2block() dmaengine: dw: extract dwc_chan_pause() for future use dmaengine: dw: replace convert_burst() with one liner dmaengine: dw: register IRQ and DMA pool with instance ID dmaengine: dw: Fix data corruption in large device to memory transfers dmaengine: ste_dma40: indicate granularity on channels dmaengine: ste_dma40: indicate directions on channels dmaengine: stm32-dma: Add error messages if xlate fails dmaengine: dw: pci: remove LPE Audio DMA ID dmaengine: stm32-dma: Add max_burst support dmaengine: stm32-dma: Add synchronization support dmaengine: stm32-dma: Fix residue computation issue in cyclic mode ...
2017-02-21Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds809-8802/+13977
Pull media updates from Mauro Carvalho Chehab: - new drivers: - i.MX6 Video Data Order Adapter's (VDOA) - Toshiba et8ek8 5MP sensor - STM DELTA multi-format video decoder V4L2 driver - SPI connected IR LED - Mediatek IR remote receiver - ZyDAS ZD1301 DVB USB interface driver - new RC keymaps - some very old LIRC drivers got removed from staging - RC core gained support encoding IR scan codes - DVB si2168 gained support for DVBv5 statistics - lirc_sir driver ported to rc-core and promoted from staging - other bug fixes, board additions and driver improvements * tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits) [media] mtk-vcodec: fix build warnings without DEBUG [media] zd1301: fix building interface driver without demodulator [media] usbtv: add sharpness control [media] cxusb: Use a dma capable buffer also for reading [media] ttpci: address stringop overflow warning [media] dvb-usb-v2: avoid use-after-free [media] add Hama Hybrid DVB-T Stick support [media] et8ek8: Fix compiler / Coccinelle warnings [media] media: fix semicolon.cocci warnings [media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter [media] v4l: of: check for unique lanes in data-lanes and clock-lanes [media] coda/imx-vdoa: constify structs [media] st-delta: debug: trace stream/frame information & summary [media] st-delta: add mjpeg support [media] st-delta: EOS (End Of Stream) support [media] st-delta: rpmsg ipc support [media] st-delta: add memory allocator helper functions [media] st-delta: STiH4xx multi-format video decoder v4l2 driver [media] MAINTAINERS: add st-delta driver [media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support ...
2017-02-21Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds124-3755/+12126
Pull pin control updates from Linus Walleij: "Pin control bulk changes for the v4.11 kernel cycle. Core changes: - Switch the generic pin config argument from 16 to 24 bits, only use 8 bits for the configuration type. We might need to encode more information about a certain setting than we need to encode different generic settings. - Add a cross-talk API to the pin control GPIO back-end, utilizing pinctrl_gpio_set_config() from GPIO drivers that want to set up a certain pin configuration in the back-end. This also includes the .set_config() refactoring of the GPIO chips, so that they pass a generic configuration for things like debouncing and single ended (typically open drain). This change has also been merged in an immutable branch to the GPIO tree. - Take hogs with a delayed work, so that we finalize probing a pin controller before trying to get any hogs. - For pin controllers putting all group and function definitions into the device tree, we now have generic code to deal with this and it is used in two drivers so far. - Simplifications of the pin request conflict check. - Make dt_free_map() optional. Updates to drivers: - pinctrl-single now use the generic helpers to generate dynamic group and function tables from the device tree. - Texas Instruments IOdelay configuration driver add-on to pinctrl-single. - i.MX: use radix trees to store groups and functions, use the new generic group and function helpers to manage them. - Intel: add support for hardware debouncing and 1K pull-down. New subdriver for the Gemini Lake SoC. - Renesas SH-PFC: drive strength and bias support, CAN bus muxing, MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791. - Aspeed: use syscon cross-dependencies to set up related bits in the LPC host controller and display controller. - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs. Add banks Y, Z, AA, AB and AC. - AMD: support additional GPIO. - STM32: set this controller to strict muxing mode. STM32H743 MCU support. - Allwinner sunxi: deep simplifications on how to support subvariants of SoCs without adding to much SoC-specific data for each subvariant, especially for sun5i variants. New driver for V3s SoCs. New driver for the H5 SoC. Support A31/A31s variants with the new variant framework. - Mvebu: simplifications to use a MMIO and regmap abstraction. New subdrivers for the 98DX3236, 98DX5241 SoCs. - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC driver to access regmaps. Add infrastructure for pin-bank retention control. Clean out the pin retention control from arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in the Samsung pin control driver(s). - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin. - Qualcomm: use raw spinlock variants: this makes the qualcomm driver realtime-safe" * tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits) pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data() pinctrl: intel: unlock on error in intel_config_set_pull() pinctrl: berlin: make bool drivers explicitly non-modular pinctrl: spear: make bool drivers explicitly non-modular pinctrl: mvebu: make bool drivers explicitly non-modular pinctrl: sunxi: make sun5i explicitly non-modular pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function pinctrl: samsung: mark PM functions as __maybe_unused pinctrl: sunxi: Remove redundant A31s pinctrl driver pinctrl: sunxi: Support A31/A31s with pinctrl variants pinctrl: Amend bindings for STM32 pinctrl pinctrl: Add STM32 pinctrl driver DT bindings pinctrl: stm32: Add STM32H743 MCU support include: dt-bindings: Add STM32H7 pinctrl DT defines gpio: aspeed: Remove dependence on GPIOF_* macros pinctrl: stm32: fix bad location of gpiochip_lock_as_irq drivers: pinctrl: add driver for Allwinner H5 SoC pinctrl: intel: Add Intel Gemini Lake pin controller support pinctrl: intel: Add support for 1k additional pull-down pinctrl: intel: Add support for hardware debouncer ...
2017-02-22HID: rmi: fallback to generic/multitouch if hid-rmi is not builtJiri Kosina1-1/+2
Commit 279967a65b32 ("HID: rmi: Handle all Synaptics touchpads using hid-rmi") unconditionally switches over handling of all Synaptics touchpads to hid-rmi (to make use of extended features of the HW); in case CONFIG_HID_RMI is disabled though this renders the touchpad unusable, as the HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) match doesn't exist and generic/multitouch doesn't bind to it either (due to hid group mismatch). Fix this by switching over to hid-rmi only if it has been actually built. Fixes: 279967a65b32 ("HID: rmi: Handle all Synaptics touchpads using hid-rmi") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-21Merge tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mipsLinus Torvalds2-4/+7
Pull MIPS updates from James Hogan: "Here's the main MIPS pull request for 4.11. It contains a few new features such as IRQ stacks, cacheinfo support, and KASLR for Octeon CPUs, and a variety of smaller improvements and fixes including devicetree additions, kexec cleanups, microMIPS stack unwinding fixes, and a bunch of build fixes to clean up continuous integration builds. Its all been in linux-next for at least a couple of days, most of it far longer. Miscellaneous: - Add IRQ stacks - Add cacheinfo support - Add "uzImage.bin" zboot target - Unify performance counter definitions - Export various (mainly assembly) symbols alongside their definitions - Audit and remove unnecessary uses of module.h kexec & kdump: - Lots of improvements and fixes - Add correct copy_regs implementations - Add debug logging of new kernel information Security: - Use Makefile.postlink to insert relocations into vmlinux - Provide plat_post_relocation hook (used for Octeon KASLR) - Add support for tuning mmap randomisation - Relocate DTB microMIPS: - A load of unwind fixes - Add some missing .insn to fix link errors MIPSr6: - Fix MULTU/MADDU/MSUBU sign extension in r2 emulation - Remove r2_emul_return and use ERETNC unconditionally on MIPSr6 - Allow pre-r6 emulation on SMP MIPSr6 kernels Cache management: - Treat physically indexed dcache as non-aliasing - Add return errors to protected cache ops for KVM - CM3: Ensure L1 & L2 cache ECC checking matches - CM3: Indicate inclusive caches - I6400: Treat dcache as physically indexed Memory management: - Ensure bootmem doesn't corrupt reserved memory - Export some TLB exception generation functions for KVM OF: - NULL check initial_boot_params before use in of_scan_flat_dt() - Fix unaligned access in of_alias_scan() SMP: - CPS: Don't BUG if a CPU fails to start Other fixes: - Fix longstanding 64-bit IP checksum carry bug - Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c - Update defconfigs for NF_CT_PROTO_DCCP, DPLITE, CPU_FREQ_STAT,SCSI_DH changes - Disable certain builtin compiler options, stack-check (whole kernel), asynchronous-unwind-tables (VDSO). - A bunch of build fixes from kernelci.org testing - Various other minor cleanups & corrections BMIPS: - Migrate interrupts during bmips_cpu_disable - BCM47xx: Add Luxul devices - BCM47xx: Fix Asus WL-500W button inversion - BCM7xxx: Add SPI device nodes Generic (multiplatform): - Add kexec DTB passing - Fix big endian - Add cpp_its_S in ksym_dep_filter to silence build warning IP22: - Reformat inline assembler code to modern standards - Fix binutils 2.25 build error IP27: - Fix duplicate CAC_BASE definition build error - Disable qlge driver to workaround broken compiler Lantiq: - Refresh defconfig and activate more drivers - Lock DMA register access - Fix cascading IRQ setup - Fix build of VPE loader - xway: Fix ethernet packet header corruption over reboot Loongson1 - Add watchdog support - 1B: Reduce DEFAULT_MEMSIZE to 64MB - 1B: Change OSC clock name to match rest of kernel - 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB Octeon: - Add KASLR support - Support Octeon III USB controller - Fix large copy_from_user corner case - Enable devtmpfs in defconfig Netlogic: - Fix non-default XLR build error due to netlogic,xlp-pic code - Fix assembler warning from smpboot.S pic32mzda: - Fix linker error when early printk is disabled Pistachio: - Add base device tree - Add Ci40 "Marduk" device tree Ralink: - Support raw appended DTB - Add missing I2C & I2S clocks - Add missing pinmux and fix pinmux function name typo - Add missing clk_round_rate() - Clean up prom_init() - MT7621: Set SoC type - MT7621: Support highmem TXx9: - Modernize printing of kernel messages and resolve KERN_CONT fallout - 7segled: use permission-specific DEVICE_ATTR variants XilFPGA: - Add IRQ controller and UART IRQ - Add AXI I2C and emaclite to DT & defconfig" * tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits) MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables MIPS: BCM47XX: Fix button inversion for Asus WL-500W MIPS: DTS: Add img directory to Makefile MIPS: ip27: Disable qlge driver in defconfig MIPS: pic32mzda: Fix linker error for pic32_get_pbclk() MIPS: Lantiq: Keep ethernet enabled during boot MIPS: OCTEON: Fix copy_from_user fault handling for large buffers MIPS: Fix special case in 64 bit IP checksumming. MIPS: OCTEON: Enable DEVTMPFS MIPS: lantiq: Set physical_memsize MIPS: sysmips: Remove duplicated include from syscall.c Kbuild: Add cpp_its_S in ksym_dep_filter MIPS: Audit and remove any unnecessary uses of module.h MIPS: Unify perf counter register definitions MIPS: Disable stack checks on MIPS kernels MIPS: OCTEON: Platform support for OCTEON III USB controller MIPS: Lantiq: Fix cascaded IRQ setup MIPS: sync-r4k: Fix KERN_CONT fallout MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch MIPS: Fix distclean with Makefile.postlink ...
2017-02-21Merge tag 'for-linus-4.11-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds24-639/+1056
Pull xen updates from Juergen Gross: "Xen features and fixes: - a series from Boris Ostrovsky adding support for booting Linux as Xen PVH guest - a series from Juergen Gross streamlining the xenbus driver - a series from Paul Durrant adding support for the new device model hypercall - several small corrections" * tag 'for-linus-4.11-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/privcmd: add IOCTL_PRIVCMD_RESTRICT xen/privcmd: Add IOCTL_PRIVCMD_DM_OP xen/privcmd: return -ENOTTY for unimplemented IOCTLs xen: optimize xenbus driver for multiple concurrent xenstore accesses xen: modify xenstore watch event interface xen: clean up xenbus internal headers xenbus: Neaten xenbus_va_dev_error xen/pvh: Use Xen's emergency_restart op for PVH guests xen/pvh: Enable CPU hotplug xen/pvh: PVH guests always have PV devices xen/pvh: Initialize grant table for PVH guests xen/pvh: Make sure we don't use ACPI_IRQ_MODEL_PIC for SCI xen/pvh: Bootstrap PVH guest xen/pvh: Import PVH-related Xen public interfaces xen/x86: Remove PVH support x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C xen/manage: correct return value check on xenbus_scanf() x86/xen: Fix APIC id mismatch warning on Intel xen/netback: set default upper limit of tx/rx queues to 8 xen/netfront: set default upper limit of tx/rx queues to 8
2017-02-21Revert "ath10k: Search SMBIOS for OEM board file extension"Kalle Valo2-100/+3
This reverts commit f2593cb1b29185d38db706cbcbe22ed538720ae1. Paul reported that this patch with older board-2.bin ath10k initialisation fails on Dell XPS 13: ath10k_pci 0000:3a:00.0: failed to fetch board data for bus=pci,vendor=168c, device=003e,subsystem-vendor=1a56,subsystem-device=1535,variant=RV_0520 from ath10k/QCA6174/hw3.0/board-2.bin The reason is that the older board-2.bin does not have the variant version of the image name and ath10k does not fallback to the older naming scheme. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=185621#c9 Fixes: f2593cb1b291 ("ath10k: Search SMBIOS for OEM board file extension") Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds24-301/+840
Pull security layer updates from James Morris: "Highlights: - major AppArmor update: policy namespaces & lots of fixes - add /sys/kernel/security/lsm node for easy detection of loaded LSMs - SELinux cgroupfs labeling support - SELinux context mounts on tmpfs, ramfs, devpts within user namespaces - improved TPM 2.0 support" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (117 commits) tpm: declare tpm2_get_pcr_allocation() as static tpm: Fix expected number of response bytes of TPM1.2 PCR Extend tpm xen: drop unneeded chip variable tpm: fix misspelled "facilitate" in module parameter description tpm_tis: fix the error handling of init_tis() KEYS: Use memzero_explicit() for secret data KEYS: Fix an error code in request_master_key() sign-file: fix build error in sign-file.c with libressl selinux: allow changing labels for cgroupfs selinux: fix off-by-one in setprocattr tpm: silence an array overflow warning tpm: fix the type of owned field in cap_t tpm: add securityfs support for TPM 2.0 firmware event log tpm: enhance read_log_of() to support Physical TPM event log tpm: enhance TPM 2.0 PCR extend to support multiple banks tpm: implement TPM 2.0 capability to get active PCR banks tpm: fix RC value check in tpm2_seal_trusted tpm_tis: fix iTPM probe via probe_itpm() function tpm: Begin the process to deprecate user_read_timer tpm: remove tpm_read_index and tpm_write_index from tpm.h ...
2017-02-21Merge tag 'dm-4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds16-227/+854
Pull device mapper updates from Mike Snitzer: - Fix dm-raid transient device failure processing and other smaller tweaks. - Add journal support to the DM raid target to close the 'write hole' on raid 4/5/6. - Fix dm-cache corruption, due to rounding bug, when cache exceeds 2TB. - Add 'metadata2' feature to dm-cache to separate the dirty bitset out from other cache metadata. This improves speed of shutting down a large cache device (which implies writing out dirty bits). - Fix a memory leak during dm-stats data structure destruction. - Fix a DM multipath round-robin path selector performance regression that was caused by less precise balancing across all paths. - Lastly, introduce a DM core fix for a long-standing DM snapshot deadlock that is rooted in the complexity of the device stack used in conjunction with block core maintaining bios on current->bio_list to manage recursion in generic_make_request(). A more comprehensive fix to block core (and its hook in the cpu scheduler) would be wonderful but this DM-specific fix is pragmatic considering how difficult it has been to make progress on a generic fix. * tag 'dm-4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits) dm: flush queued bios when process blocks to avoid deadlock dm round robin: revert "use percpu 'repeat_count' and 'current_path'" dm stats: fix a leaked s->histogram_boundaries array dm space map metadata: constify dm_space_map structures dm cache metadata: use cursor api in blocks_are_clean_separate_dirty() dm persistent data: add cursor skip functions to the cursor APIs dm cache metadata: use dm_bitset_new() to create the dirty bitset in format 2 dm bitset: add dm_bitset_new() dm cache metadata: name the cache block that couldn't be loaded dm cache metadata: add "metadata2" feature dm cache metadata: use bitset cursor api to load discard bitset dm bitset: introduce cursor api dm btree: use GFP_NOFS in dm_btree_del() dm space map common: memcpy the disk root to ensure it's arch aligned dm block manager: add unlikely() annotations on dm_bufio error paths dm cache: fix corruption seen when using cache > 2TB dm raid: cleanup awkward branching in raid_message() option processing dm raid: use mddev rather than rdev->mddev dm raid: use read_disk_sb() throughout dm raid: add raid4/5/6 journaling support ...
2017-02-21Merge tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds79-1090/+2416
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for Marvell SD8787 Wifi/BT chip - Improve UHS support for SDIO - Invent MMC_CAP_3_3V_DDR and a DT binding for eMMC DDR 3.3V mode - Detect Auto BKOPS enable bit - Export eMMC device lifetime information through sysfs - First take to slim down the public mmc headers to avoid abuse - Re-factoring of the mmc block device driver to prepare for blkmq - Cleanup code for the mmc block device driver - Clarify and cleanup code dealing with data requests - Cleanup some code by converting to ida_simple_ functions - Cleanup code dealing with card quirks - Cleanup private and public mmc header files MMC host: - Don't rely on public mmc headers to include non-mmc related headers - meson: Add support for eMMC HS400 mode - meson: Various cleanups and improvements - omap_hsmmc: Use the proper provided busy timeout from the core - sunxi: Enable new timings for the A64 MMC controllers - sunxi: Improvements for clock management - tmio: Improvements for SDIO interrupts - mxs-mmc: Add CMD23 support - sdhci-msm: Enable HS400 enhanced strobe mode support - sdhci-msm: Correct HS400 tuning sequence - sdhci-acpi: Support deferred probe - sdhci-pci: Add support for eMMC HS200 tuning mode on AMD - mediatek: Correct the implementation of card busy detection - dw_mmc: Initial support for ZX mmc controller - sh_mobile_sdhi: Enable support for eMMC HS200 mode - sh_mmcif: Various cleanups and improvements" * tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (145 commits) mmc: core: add mmc prefix for blk_fixups mmc: core: move all quirks together into quirks.h mmc: core: improve the quirks for sdio devices mmc: core: move some sdio IDs out of quirks file mmc: core: change quirks.c to be a header file mmc: sdhci-cadence: fix bit shift of read data from PHY port mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS support mmc: MAN_BKOPS_EN inverse debug message logic mmc: meson-gx: add support for HS400 mode mmc: meson-gx: remove unneeded checks in remove mmc: meson-gx: reduce bounce buffer size mmc: meson-gx: set max block count and request size mmc: meson-gx: improve interrupt handling mmc: meson-gx: improve meson_mmc_irq_thread mmc: meson-gx: improve meson_mmc_clk_set mmc: meson-gx: minor improvements in meson_mmc_set_ios mmc: meson: Assign the minimum clk rate as close to 400KHz as possible mmc: core: start to break apart mmc_start_areq() mmc: block: respect bool returned from blk_end_request() mmc: block: return errorcode from mmc_sd_num_wr_blocks() ...
2017-02-21Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds121-3888/+9025
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid, megaraid_sas, ...). There's also an assortment of minor fixes and the major update of switching a bunch of drivers to pci_alloc_irq_vectors from Christoph" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits) scsi: megaraid_sas: handle dma_addr_t right on 32-bit scsi: megaraid_sas: array overflow in megasas_dump_frame() scsi: snic: switch to pci_irq_alloc_vectors scsi: megaraid_sas: driver version upgrade scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2 scsi: megaraid_sas: Indentation and smatch warning fixes scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints scsi: megaraid_sas: Increase internal command pool scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete scsi: megaraid_sas: Bail out the driver load if ld_list_query fails scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate scsi: megaraid_sas: update can_queue only if the new value is less scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD ...
2017-02-21Merge tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-blockLinus Torvalds121-4208/+2513
Pull block layer updates from Jens Axboe: - blk-mq scheduling framework from me and Omar, with a port of the deadline scheduler for this framework. A port of BFQ from Paolo is in the works, and should be ready for 4.12. - Various fixups and improvements to the above scheduling framework from Omar, Paolo, Bart, me, others. - Cleanup of the exported sysfs blk-mq data into debugfs, from Omar. This allows us to export more information that helps debug hangs or performance issues, without cluttering or abusing the sysfs API. - Fixes for the sbitmap code, the scalable bitmap code that was migrated from blk-mq, from Omar. - Removal of the BLOCK_PC support in struct request, and refactoring of carrying SCSI payloads in the block layer. This cleans up the code nicely, and enables us to kill the SCSI specific parts of struct request, shrinking it down nicely. From Christoph mainly, with help from Hannes. - Support for ranged discard requests and discard merging, also from Christoph. - Support for OPAL in the block layer, and for NVMe as well. Mainly from Scott Bauer, with fixes/updates from various others folks. - Error code fixup for gdrom from Christophe. - cciss pci irq allocation cleanup from Christoph. - Making the cdrom device operations read only, from Kees Cook. - Fixes for duplicate bdi registrations and bdi/queue life time problems from Jan and Dan. - Set of fixes and updates for lightnvm, from Matias and Javier. - A few fixes for nbd from Josef, using idr to name devices and a workqueue deadlock fix on receive. Also marks Josef as the current maintainer of nbd. - Fix from Josef, overwriting queue settings when the number of hardware queues is updated for a blk-mq device. - NVMe fix from Keith, ensuring that we don't repeatedly mark and IO aborted, if we didn't end up aborting it. - SG gap merging fix from Ming Lei for block. - Loop fix also from Ming, fixing a race and crash between setting loop status and IO. - Two block race fixes from Tahsin, fixing request list iteration and fixing a race between device registration and udev device add notifiations. - Double free fix from cgroup writeback, from Tejun. - Another double free fix in blkcg, from Hou Tao. - Partition overflow fix for EFI from Alden Tondettar. * tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-block: (156 commits) nvme: Check for Security send/recv support before issuing commands. block/sed-opal: allocate struct opal_dev dynamically block/sed-opal: tone down not supported warnings block: don't defer flushes on blk-mq + scheduling blk-mq-sched: ask scheduler for work, if we failed dispatching leftovers blk-mq: don't special case flush inserts for blk-mq-sched blk-mq-sched: don't add flushes to the head of requeue queue blk-mq: have blk_mq_dispatch_rq_list() return if we queued IO or not block: do not allow updates through sysfs until registration completes lightnvm: set default lun range when no luns are specified lightnvm: fix off-by-one error on target initialization Maintainers: Modify SED list from nvme to block Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN uapi: sed-opal fix IOW for activate lsp to use correct struct cdrom: Make device operations read-only elevator: fix loading wrong elevator type for blk-mq devices cciss: switch to pci_irq_alloc_vectors block/loop: fix race between I/O and set_status blk-mq-sched: don't hold queue_lock when calling exit_icq block: set make_request_fn manually in blk_mq_update_nr_hw_queues ...
2017-02-21bnxt_en: use eth_hw_addr_random()Tobias Klauser1-1/+1
Use eth_hw_addr_random() to set a random MAC address in order to make sure bp->dev->addr_assign_type will be properly set to NET_ADDR_RANDOM. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: enable building on 64-bit platformsThomas Petazzoni2-15/+19
The mvpp2 is going to be extended to support the Marvell Armada 7K/8K platform, which is ARM64. As a preparation to this work, this commit enables building the mvpp2 driver on ARM64, by: - Adjusting the Kconfig dependency - Fixing the types used in the driver so that they are 32/64-bits compliant. We use dma_addr_t for DMA addresses, and unsigned long for virtual addresses. It is worth mentioning that after this commit, the driver is for now still only used on 32-bits platforms, and will only work on 32-bits platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: switch to build_skb() in the RX pathThomas Petazzoni1-22/+57
This commit adapts the mvpp2 RX path to use the build_skb() method. Not only build_skb() is now the recommended mechanism, but it also simplifies the addition of support for the PPv2.2 variant. Indeed, without build_skb(), we have to keep track for each RX descriptor of the physical address of the packet buffer, and the virtual address of the SKB. However, in PPv2.2 running on 64 bits platform, there is not enough space in the descriptor to store the virtual address of the SKB. So having to take care only of the address of the packet buffer, and building the SKB upon reception helps in supporting PPv2.2. The implementation is fairly straightforward: - mvpp2_skb_alloc() is renamed to mvpp2_buf_alloc() and no longer allocates a SKB. Instead, it allocates a buffer using the new mvpp2_frag_alloc() function, with enough space for the data and SKB. - The initialization of the RX buffers in mvpp2_bm_bufs_add() as well as the refill of the RX buffers in mvpp2_rx_refill() is adjusted accordingly. - Finally, the mvpp2_rx() is modified to use build_skb(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: simplify MVPP2_PRS_RI_* definitionsThomas Petazzoni1-8/+8
Some of the MVPP2_PRS_RI_* definitions use the ~(value) syntax, which doesn't compile nicely on 64-bit. Moreover, those definitions are in fact unneeded, since they are always used in combination with a bit mask that ensures only the appropriate bits are modified. Therefore, such definitions should just be set to 0x0. In addition, as suggested by Russell King, we change the _MASK definitions to also use the BIT() macro so that it is clear they are related to the values defined afterwards. For example: #define MVPP2_PRS_RI_L2_CAST_MASK 0x600 #define MVPP2_PRS_RI_L2_UCAST ~(BIT(9) | BIT(10)) #define MVPP2_PRS_RI_L2_MCAST BIT(9) #define MVPP2_PRS_RI_L2_BCAST BIT(10) becomes #define MVPP2_PRS_RI_L2_CAST_MASK (BIT(9) | BIT(10)) #define MVPP2_PRS_RI_L2_UCAST 0x0 #define MVPP2_PRS_RI_L2_MCAST BIT(9) #define MVPP2_PRS_RI_L2_BCAST BIT(10) Because the values (MVPP2_PRS_RI_L2_UCAST, MVPP2_PRS_RI_L2_MCAST and MVPP2_PRS_RI_L2_BCAST) are always applied with MVPP2_PRS_RI_L2_CAST_MASK, and therefore there is no need for MVPP2_PRS_RI_L2_UCAST to be defined as ~(BIT(9) | BIT(10)). It fixes the following warnings when building the driver on a 64-bit platform (which is not possible as of this commit, but will be enabled in a follow-up commit): drivers/net/ethernet/marvell/mvpp2.c: In function ‘mvpp2_prs_mac_promisc_set’: drivers/net/ethernet/marvell/mvpp2.c:524:33: warning: large integer implicitly truncated to unsigned type [-Woverflow] #define MVPP2_PRS_RI_L2_UCAST ~(BIT(9) | BIT(10)) ^ drivers/net/ethernet/marvell/mvpp2.c:1459:33: note: in expansion of macro ‘MVPP2_PRS_RI_L2_UCAST’ mvpp2_prs_sram_ri_update(&pe, MVPP2_PRS_RI_L2_UCAST, Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULTThomas Petazzoni1-1/+1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: remove unused register definitionsThomas Petazzoni1-4/+0
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: simplify mvpp2_bm_bufs_add()Thomas Petazzoni1-3/+1
The mvpp2_bm_bufs_add() currently creates a fake cookie by calling mvpp2_bm_cookie_pool_set(), just to be able to call mvpp2_pool_refill(). But all what mvpp2_pool_refill() does is extract the pool ID from the cookie, and call mvpp2_bm_pool_put() with this ID. Instead of doing this convoluted thing, just call mvpp2_bm_pool_put() directly, since we have the BM pool ID. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: drop useless fields in mvpp2_bm_pool and related codeThomas Petazzoni1-15/+3
This commit drops dead code from the mvpp2 driver. The 'in_use' and 'in_use_thresh' fields of 'struct mvpp2_bm_pool' are incremented/decremented/initialized in various places. But they are only used in one place: if (is_recycle && (atomic_read(&bm_pool->in_use) < bm_pool->in_use_thresh)) return 0; However 'is_recycle', passed as argument to mvpp2_rx_refill() is always false. So in fact, this code is never reached, and the 'is_recycle' argument is useless. So let's drop this code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'Thomas Petazzoni1-3/+0
This commit remove a field of 'struct mvpp2_tx_queue' that is not used anywhere. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: release reference to txq_cpu[] entry after unmappingThomas Petazzoni1-5/+4
The mvpp2_txq_bufs_free() function is called upon TX completion to DMA unmap TX buffers, and free the corresponding SKBs. It gets the references to the SKB to free and the DMA buffer to unmap from a per-CPU txq_pcpu data structure. However, the code currently increments the pointer to the next entry before doing the DMA unmap and freeing the SKB. It does not cause any visible problem because for a given SKB the TX completion is guaranteed to take place on the CPU where the TX was started. However, it is much more logical to increment the pointer to the next entry once the current entry has been completely unmapped/released. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()Thomas Petazzoni1-2/+29
When configuring the MVPP2_ISR_RX_THRESHOLD_REG with the RX coalescing time threshold, we do not check for the maximum allowed value supported by the driver, which means we might overflow and use a bogus value. This commit adds a check for this situation, and if a value higher than what is supported by the hardware is provided, then we use the maximum value supported by the hardware. In order to achieve this in a way that avoids overflow and rounding errors, we introduce two utility functions mvpp2_usec_to_cycles() and cycles_to_usec(). Many thanks to Russell King for suggesting this implementation. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()Thomas Petazzoni1-3/+4
Currently, mvpp2_rx_pkts_coal_set() does the following to avoid setting a too large value for the RX coalescing by packet number: val = (pkts & MVPP2_OCCUPIED_THRESH_MASK); This means that if you set a value that is slightly higher the the maximum number of packets, you in fact get a very low value. It makes a lot more sense to simply check if the value is too high, and if it's too high, limit it to the maximum possible value. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_setThomas Petazzoni1-12/+8
As noticed by Russell King, the last argument of mvpp2_rx_{pkts,time}_coal_set() is useless, since the packet/time coalescing value is already stored in the 'struct mvpp2_rx_queue *' passed as argument to these functions. So passing the packet/time value as an additional argument, and setting them again in the mvpp2_rx_queue structure is useles. This commit therefore gets rid of this additional argument, assuming the caller has assigned the appropriate value to rxq->pkts_coal or rxq->time_coal before calling the respective functions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21net: mvpp2: fix DMA address calculation in mvpp2_txq_inc_put()Thomas Petazzoni1-1/+1
When TX descriptors are filled in, the buffer DMA address is split between the tx_desc->buf_phys_addr field (high-order bits) and tx_desc->packet_offset field (5 low-order bits). However, when we re-calculate the DMA address from the TX descriptor in mvpp2_txq_inc_put(), we do not take tx_desc->packet_offset into account. This means that when the DMA address is not aligned on a 32 bytes boundary, we end up calling dma_unmap_single() with a DMA address that was not the one returned by dma_map_single(). This inconsistency is detected by the kernel when DMA_API_DEBUG is enabled. We fix this problem by properly calculating the DMA address in mvpp2_txq_inc_put(). Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21macsec: fix validation failed in asynchronous operation.Lee Ryder1-0/+3
MACSec test failed when asynchronous crypto operations is used. It encounters packet validation failed since macsec_skb_cb(skb)->valid is always 'false'. This patch adds missing "macsec_skb_cb(skb)->valid = true" in macsec_decrypt_done() when "err == 0". Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21virtio-net: switch to use build_skb() for small bufferJason Wang1-75/+63
This patch switch to use build_skb() for small buffer which can have better performance for both TCP and XDP (since we can work at page before skb creation). It also remove lots of XDP codes since both mergeable and small buffer use page frag during refill now. Before | After XDP_DROP(xdp1) 64B : 11.1Mpps | 14.4Mpps Tested with xdp1/xdp2/xdp_ip_tx_tunnel and netperf. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21vxlan: remove unused variable saddr in neigh_reduceRoopa Prabhu1-2/+1
silences the below warning: drivers/net/vxlan.c: In function ‘neigh_reduce’: drivers/net/vxlan.c:1599:25: warning: variable ‘saddr’ set but not used [-Wunused-but-set-variable] Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21vxlan: add changelink supportRoopa Prabhu1-113/+270
This patch adds changelink rtnl op support for vxlan netdevs. code changes involve: - refactor vxlan_newlink into vxlan_nl2conf to be used by vxlan_newlink and vxlan_changelink - vxlan_nl2conf and vxlan_dev_configure take a changelink argument to isolate changelink checks and updates. - Allow changing only a few attributes: - return -EOPNOTSUPP for attributes that cannot be changed for now. Incremental patches can make the non-supported one available in the future if needed. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-21Merge branch 'topic/zx' into for-linusVinod Koul3-5/+7
2017-02-21Merge branch 'topic/stm32-dma' into for-linusVinod Koul2-34/+61
2017-02-21Merge branch 'topic/ste' into for-linusVinod Koul1-2/+5
2017-02-21Merge branch 'topic/intel' into for-linusVinod Koul4-67/+223
2017-02-20virito-net: set queues after reset during xdp_setJason Wang1-20/+8
We set queues before reset which will cause a crash[1]. This is because is_xdp_raw_buffer_queue() depends on the old xdp queue pairs number to do the correct detection. So fix this by - passing xdp queue pairs and current queue pairs to virtnet_reset() - change vi->xdp_qp after reset but before refill, to make sure both free_unused_bufs() and refill can make correct detection of XDP. - remove the duplicated queue pairs setting before virtnet_reset() since we will do it inside virtnet_reset() [1] [ 74.328168] general protection fault: 0000 [#1] SMP [ 74.328625] Modules linked in: nfsd xfs libcrc32c virtio_net virtio_pci [ 74.329117] CPU: 0 PID: 2849 Comm: xdp2 Not tainted 4.10.0-rc7+ #499 [ 74.329577] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 [ 74.330424] task: ffff88007a894000 task.stack: ffffc90004388000 [ 74.330844] RIP: 0010:skb_release_head_state+0x28/0x80 [ 74.331298] RSP: 0018:ffffc9000438b8d0 EFLAGS: 00010206 [ 74.331676] RAX: 0000000000000000 RBX: ffff88007ad96300 RCX: 0000000000000000 [ 74.332217] RDX: ffff88007fc137a8 RSI: ffff88007fc0db28 RDI: 0001bf00000001be [ 74.332758] RBP: ffffc9000438b8d8 R08: 000000000005008f R09: 00000000000005f9 [ 74.333274] R10: ffff88007d001700 R11: ffffffff820a8a4d R12: ffff88007ad96300 [ 74.333787] R13: 0000000000000002 R14: ffff880036604000 R15: 000077ff80000000 [ 74.334308] FS: 00007fc70d8a7b40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 74.334891] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 74.335314] CR2: 00007fff4144a710 CR3: 000000007ab56000 CR4: 00000000003406f0 [ 74.335830] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 74.336373] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 74.336895] Call Trace: [ 74.337086] skb_release_all+0xd/0x30 [ 74.337356] consume_skb+0x2c/0x90 [ 74.337607] free_unused_bufs+0x1ff/0x270 [virtio_net] [ 74.337988] ? vp_synchronize_vectors+0x3b/0x60 [virtio_pci] [ 74.338398] virtnet_xdp+0x21e/0x440 [virtio_net] [ 74.338741] dev_change_xdp_fd+0x101/0x140 [ 74.339048] do_setlink+0xcf4/0xd20 [ 74.339304] ? symcmp+0xf/0x20 [ 74.339529] ? mls_level_isvalid+0x52/0x60 [ 74.339828] ? mls_range_isvalid+0x43/0x50 [ 74.340135] ? nla_parse+0xa0/0x100 [ 74.340400] rtnl_setlink+0xd4/0x120 [ 74.340664] ? cpumask_next_and+0x30/0x50 [ 74.340966] rtnetlink_rcv_msg+0x7f/0x1f0 [ 74.341259] ? sock_has_perm+0x59/0x60 [ 74.341586] ? napi_consume_skb+0xe2/0x100 [ 74.342010] ? rtnl_newlink+0x890/0x890 [ 74.342435] netlink_rcv_skb+0x92/0xb0 [ 74.342846] rtnetlink_rcv+0x23/0x30 [ 74.343277] netlink_unicast+0x162/0x210 [ 74.343677] netlink_sendmsg+0x2db/0x390 [ 74.343968] sock_sendmsg+0x33/0x40 [ 74.344233] SYSC_sendto+0xee/0x160 [ 74.344482] ? SYSC_bind+0xb0/0xe0 [ 74.344806] ? sock_alloc_file+0x92/0x110 [ 74.345106] ? fd_install+0x20/0x30 [ 74.345360] ? sock_map_fd+0x3f/0x60 [ 74.345586] SyS_sendto+0x9/0x10 [ 74.345790] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 74.346086] RIP: 0033:0x7fc70d1b8f6d [ 74.346312] RSP: 002b:00007fff4144a708 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 74.346785] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007fc70d1b8f6d [ 74.347244] RDX: 000000000000002c RSI: 00007fff4144a720 RDI: 0000000000000003 [ 74.347683] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 74.348544] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff4144bd90 [ 74.349082] R13: 0000000000000002 R14: 0000000000000002 R15: 00007fff4144cda0 [ 74.349607] Code: 00 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 58 48 85 ff 74 0e 40 f6 c7 01 74 3d 48 c7 43 58 00 00 00 00 48 8b 7b 68 48 85 ff 74 05 <f0> ff 0f 74 20 48 8b 43 60 48 85 c0 74 14 65 8b 15 f3 ab 8d 7e [ 74.351008] RIP: skb_release_head_state+0x28/0x80 RSP: ffffc9000438b8d0 [ 74.351625] ---[ end trace fe6e19fd11cfc80b ]--- Fixes: 2de2f7f40ef9 ("virtio_net: XDP support for adjust_head") Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20dpaa_eth: implement ioctl() for PHY-related opsMichael Walle1-0/+8
This commit adds the ndo_do_ioctl() callback which allows the userspace to access PHY registers, for example. This will make mii-diag and similar tools work. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: qualcomm: qca: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-8/+10
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20bnxt_en: fix pci cleanup in bnxt_init_one() failure pathSathya Perla1-37/+39
In the bnxt_init_one() failure path, bar1 and bar2 are not being unmapped. This commit fixes this issue. Reorganize the code so that bnxt_init_one()'s failure path and bnxt_remove_one() can call the same function to do the PCI cleanup. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20bnxt_en: Fix NULL pointer dereference in a failure path during open.Michael Chan1-1/+3
If bnxt_hwrm_ring_free() is called during a failure path in bnxt_open(), it is possible that the completion rings have not been allocated yet. In that case, the completion doorbell has not been initialized, and calling bnxt_disable_int() will crash. Fix it by checking that the completion ring has been initialized before writing to the completion ring doorbell. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20bnxt_en: Reject driver probe against all bridge devicesRay Jui1-1/+1
There are additional SoC devices that use the same device ID for bridge and NIC devices. The bnxt driver should reject probe against all bridge devices since it's meant to be used with only endpoint devices. Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20Merge tag 'device-properties-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds2-83/+162
Pull device property updates from Rafael J. Wysocki: "Generic device properties framework updates for v4.11-rc1 Allow built-in (static) device properties to be declared as constant, make it possible to save memory by discarding alternative (but unused) built-in (static) property sets and add support for automatic handling of built-in properties to the I2C code" * tag 'device-properties-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: i2c: allow specify device properties in i2c_board_info device property: export code duplicating array of property entries device property: constify property arrays values device property: allow to constify properties
2017-02-20Merge tag 'acpi-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds203-440/+663
Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20170119, which among other things updates copyright notices in all of the ACPICA files, fix a couple of issues in the ACPI EC and button drivers, fix modalias handling for non-discoverable devices with DT-compatible identification strings, add a suspend quirk for one platform and fix a message in the APEI code. Specifics: - Update of the ACPICA code in the kernel to upstream revision 20170119 including: + Fixes related to the handling of the bit width and bit offset fields in Generic Address Structure (Lv Zheng) + ACPI resources handling fix related to invalid resource descriptors (Bob Moore) + Fix to enable implicit result conversion for several ASL library functions (Bob Moore) + Support for method invocations as target operands in AML (Bob Moore) + Fix to use a correct operand type for DeRefOf() in some situations (Bob Moore) + Utilities updates (Bob Moore, Lv Zheng) + Disassembler/debugger updates (David Box, Lv Zheng) + Build fixes (Colin Ian King, Lv Zheng) + Update of copyright notices in all files (Bob Moore) - Fix for modalias handling for SPI and I2C devices with DT-compatible identification strings (Dan O'Donovan) - Fixes for the ACPI EC and button drivers (Lv Zheng) - ACPI processor handling fix related to CPU hotplug (online/offline) on x86 (Vitaly Kuznetsov) - Suspend quirk to save/restore NVS memory over S3 transitions for Lenovo G50-45 (Zhang Rui) - Message formatting fix for the ACPI APEI code (Colin Ian King)" * tag 'acpi-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPICA: Update version to 20170119 ACPICA: Tools: Update common signon, remove compilation bit width ACPICA: Source tree: Update copyright notices to 2017 ACPICA: Linuxize: Restore and fix Intel compiler build x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplug spi: acpi: Initialize modalias from of_compatible i2c: acpi: Initialize info.type from of_compatible ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node() ACPI: save NVS memory for Lenovo G50-45 ACPI, APEI, EINJ: fix malformed newline escape ACPI / button: Remove lid_init_state=method mode ACPI / button: Change default behavior to lid_init_state=open ACPI / EC: Use busy polling mode when GPE is not enabled ACPI / EC: Remove old CLEAR_ON_RESUME quirk ACPICA: Update version to 20161222 ACPICA: Parser: Update parse info table for some operators ACPICA: Fix a problem with recent extra support for control method invocations ACPICA: Parser: Allow method invocations as target operands ACPICA: Fix for implicit result conversion for the ToXXX functions ACPICA: Resources: Not a valid resource if buffer length too long ..
2017-02-20Merge tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds42-1330/+1825
Pull power management updates from Rafael Wysocki: "The majority of changes go into the Operating Performance Points (OPP) framework and cpufreq this time, followed by devfreq and some scattered updates all over. The OPP changes are mostly related to switching over from RCU-based synchronization, that turned out to be overly complicated and problematic, to reference counting using krefs. In the cpufreq land there are core cleanups, documentation updates, a new driver for Broadcom BMIPS SoCs, a new cpufreq-dt sub-driver for TI SoCs that require special handling, ARM64 SoCs support for the qoriq driver, intel_pstate updates, powernv driver update and assorted fixes. The devfreq changes are mostly fixes related to the sysfs interface and some Exynos drivers updates. Apart from that, the cpuidle menu governor will support per-CPU PM QoS constraints for the wakeup latency now, some bugs in the wakeup IRQs framework are fixed, the generic power domains framework should handle asynchronous invocations of *noirq suspend/resume callbacks from now on, the analyze_suspend.py script is updated and there is a new tool for intel_pstate diagnostics. Specifics: - Operating Performance Points (OPP) framework fixes, cleanups and switch over from RCU-based synchronization to reference counting using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach) - cpufreq core cleanups and documentation updates (Viresh Kumar, Rafael Wysocki) - New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer) - New cpufreq-dt sub-driver for TI SoCs requiring special handling, like in the AM335x, AM437x, DRA7x, and AM57x families, along with new DT bindings for it (Dave Gerlach, Paul Gortmaker) - ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian) - intel_pstate driver updates including a new sysfs knob to control the driver's operation mode and fixes related to the no_turbo sysfs knob and the hardware-managed P-states feature support (Rafael Wysocki, Srinivas Pandruvada) - New interface to export ultra-turbo frequencies for the powernv cpufreq driver (Shilpasri Bhat) - Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter, Wei Yongjun) - devfreq core fixes, mostly related to the sysfs interface exported by it (Chanwoo Choi, Chris Diamand) - Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo Choi) - Device PM QoS extension to support CPUs and support for per-CPU wakeup (device resume) latency constraints in the cpuidle menu governor (Alex Shi) - Wakeup IRQs framework fixes (Grygorii Strashko) - Generic power domains framework update including a fix to make it handle asynchronous invocations of *noirq suspend/resume callbacks correctly (Ulf Hansson, Geert Uytterhoeven) - Assorted fixes and cleanups in the core suspend/hibernate code, PM QoS framework and x86 ACPI idle support code (Corentin Labbe, Geert Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers) - Update of the analyze_suspend.py script is updated to version 4.5 offering multiple improvements (Todd Brandt) - New tool for intel_pstate diagnostics using the pstate_sample tracepoint (Doug Smythies)" * tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (85 commits) MAINTAINERS: cpufreq: add bmips-cpufreq.c PM / QoS: Fix memory leak on resume_latency.notifiers PM / Documentation: Spelling s/wrtie/write/ PM / sleep: Fix test_suspend after sleep state rework cpufreq: CPPC: add ACPI_PROCESSOR dependency cpufreq: make ti-cpufreq explicitly non-modular cpufreq: Do not clear real_cpus mask on policy init tools/power/x86: Debug utility for intel_pstate driver AnalyzeSuspend: fix drag and zoom bug in javascript PM / wakeirq: report a wakeup_event on dedicated wekup irq PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqs PM / wakeirq: Enable dedicated wakeirq for suspend cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime Documentation: dt: add bindings for ti-cpufreq PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API cpufreq: qoriq: Don't look at clock implementation details cpufreq: qoriq: add ARM64 SoCs support PM / Domains: Provide dummy governors if CONFIG_PM_GENERIC_DOMAINS=n cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata() ...
2017-02-20Merge tag 'leds_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-ledsLinus Torvalds4-8/+100
Pull LED updates from Jacek Anaszewski: "New features and improvements: - add new optional brightness_hw_changed attribute for the LEDs that may have their brightness level changed autonomously (outside of kernel control) by hardware / firmware. The attribute supports userspace notifications through POLLPRI events - add led_brightness_hw_mon tool that demonstrates how to use the aforementioned feature - add LED_ON enum for LEDs that can be only turned on/off, and don't allow setting other brightness levels - allow for adjusting heartbeat trigger blink brightness level Fixes and cleanups: - avoid harmless maybe-uninitialized warning in leds-ktd2692.c - add context to the existing example entries in common LED bindings to make the documentation more clear" * tag 'leds_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: ledtrig-heartbeat: Make top brightness adjustable tools/leds: Add led_hw_brightness_mon program leds: class: Add new optional brightness_hw_changed attribute leds: ktd2692: avoid harmless maybe-uninitialized warning leds: add LED_ON brightness as boolean value DT: leds: Improve examples by adding some context
2017-02-20Merge tag 'spi-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds25-334/+1429
Pull spi updates from Mark Brown: "This release is mainly a collection of driver specific updates, including a few nice cleanups to make drivers use more core features. - automatically use the parent device to allocate DMA buffers if there wasn't an explicitly configured device. - fixes for leaks on allocation. - a small piece of the start of SPI slave support, a feature that's been on the cards for over a decade!" * tag 'spi-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (55 commits) spi: spi-ti-qspi: Fix error handling spi: spi-ti-qspi: Fix error handling spi: lantiq-ssc: activate under COMPILE_TEST spi: armada-3700: Remove spi_master_put in a3700_spi_remove() spi: ti-qspi: revise ti_qspi_probe() failure flow spi: spi-ep93xx: simplify GPIO chip selects spi: rspi: Replaces "n" by "len" in qspi_transfer_*() spi: rspi: Fixes bogus received byte in qspi_transfer_in() spi: bcm-qspi: Remove unnecessary platform_set_drvdata() spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance spi: lantiq-ssc: add support for Lantiq SSC SPI controller spi: s3c64xx: fix inconsistency between binding and driver spi: armada-3700: Remove .owner field for driver spi: bcm-qspi: Added mspi read fallback in bcm_qspi_flash_read() spi: fix device-node leaks spi: mediatek: Only do dma for 4-byte aligned buffers spi: When no dma_chan map buffers with spi_master's parent spi: pca2xx-pci: Allow MSI spi: pxa2xx: Prepare for edge-triggered interrupts spi: pxa2xx: Add support for Intel Gemini Lake ...
2017-02-20Merge tag 'regulator-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds44-203/+818
Pull regulator updates from Mark Brown: "Quite a lot of work going on the core this release, mainly around system initialization, but a quiet release for drivers: - fixes for registration of multiple regulators on a PMIC from Javier Martinez Canillas and Jon Hunter. - cleanups to the regulator_get() code from Dmitry Torokhov - lots of constifcation of structs from Bhumika Goyal - support for Motorola CPCAP regulators from Tony Lindgren" * tag 'regulator-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits) regulator: core: Resolve supplies before disabling unused regulators regulator: Fix regulator_summary for deviceless consumers regulator: tps65086: Fix DT node referencing in of_parse_cb regulator: tps65086: Fix expected switch DT node names regulator: core: simplify _regulator_get() regulator: core: have regulator_dev_lookup() return ERR_PTR-encoded errors regulator: gpio: correct default type regulator: cpcap: Add basic regulator support regulator: core: fix typo in regulator_bulk_disable() regulator: core: optimize devm_regulator_bulk_get() regulator: core: simplify regulator_bulk_force_disable() regulator: core: have _regulator_get() accept get_type argument regulator: core: remove dead code in _regulator_get() regulator: rn5t618: constify regulator_ops structure regulator: rc5t583-regulator: constify regulator_ops structure regulator: pv88090-regulator: constify regulator_ops structure regulator: pv88080-regulator: constify regulator_ops structure regulator: pv88060-regulator: constify regulator_ops structure regulator: pfuze100-regulator: constify regulator_ops structure regulator: pcf50633-regulator: constify regulator_ops structure ...