| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* irq/plic-masking:
: .
: SiFive PLIC optimisations from Samuel Holland:
:
: "This series removes the spinlocks and cpumask operations from the PLIC
: driver's hot path. As far as I know, using the priority to mask
: interrupts is an intended usage and will work on all existing
: implementations. [...]"
: .
irqchip/sifive-plic: Separate the enable and mask operations
irqchip/sifive-plic: Make better use of the effective affinity mask
PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu()
genirq: Provide an IRQ affinity mask in non-SMP configs
genirq: Return a const cpumask from irq_data_get_affinity_mask
genirq: Add and use an irq_data_update_affinity helper
genirq: Refactor accessors to use irq_data_get_affinity_mask
genirq: Drop redundant irq_init_effective_affinity
genirq: GENERIC_IRQ_EFFECTIVE_AFF_MASK depends on SMP
genirq: GENERIC_IRQ_IPI depends on SMP
irqchip/mips-gic: Only register IPI domain when SMP is enabled
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The PLIC has two per-IRQ checks before sending an IRQ to a hart context.
First, it checks that the IRQ's priority is nonzero. Then, it checks
that the enable bit is set for that combination of IRQ and context.
Currently, the PLIC driver sets both the priority value and the enable
bit in its (un)mask operations. However, modifying the enable bit is
problematic for two reasons:
1) The enable bits are packed, so changes are not atomic and require
taking a spinlock.
2) The following requirement from the PLIC spec, which explains the
racy (un)mask operations in plic_irq_eoi():
If the completion ID does not match an interrupt source
that is currently enabled for the target, the completion
is silently ignored.
Both of these problems are solved by using the priority value to mask
IRQs. Each IRQ has a separate priority register, so writing the priority
value is atomic. And since the enable bit remains set while an IRQ is
masked, the EOI operation works normally. The enable bits are still used
to control the IRQ's affinity.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701202440.59059-3-samuel@sholland.org
|
|
The PLIC driver already updates the effective affinity mask in its
.irq_set_affinity callback. Take advantage of that information to only
touch bits (and take spinlocks) for the specific relevant hart contexts.
First, make sure the effective affinity mask is set before IRQ startup.
Then, since this mask already takes priv->lmask into account, checking
that mask later is no longer needed (and handler->present is equivalent
to the bit being set in priv->lmask).
Finally, when (un)masking or changing affinity, only clear/set the
enable bits in the specific old/new context(s). The cpumask operations
in plic_irq_unmask() are not needed because they duplicate the code in
plic_set_affinity().
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701202440.59059-2-samuel@sholland.org
|
|
* irq/affinity-nosmp:
: .
: non-SMP IRQ affinity fixes courtesy of Samuel Holland:
:
: "This series solves some inconsistency with how IRQ affinity masks are
: handled between SMP and non-SMP configurations.
:
: In non-SMP configs, an IRQ's true affinity is always cpumask_of(0), so
: irq_{,data_}get_affinity_mask now return that, instead of returning an
: uninitialized per-IRQ cpumask. This change makes iterating over the
: affinity mask do the right thing in both SMP and non-SMP configurations.
:
: To accomplish that:
: - patches 1-3 disable some library code that was broken anyway on !SMP
: - patches 4-7 refactor the code so that irq_{,data_}get_affinity_mask
: can return a const cpumask, since that is what cpumask_of provides
: - patch 8 drops the per-IRQ cpumask and replaces it with cpumask_of(0)"
: .
PCI: hv: Take a const cpumask in hv_compose_msi_req_get_cpu()
genirq: Provide an IRQ affinity mask in non-SMP configs
genirq: Return a const cpumask from irq_data_get_affinity_mask
genirq: Add and use an irq_data_update_affinity helper
genirq: Refactor accessors to use irq_data_get_affinity_mask
genirq: Drop redundant irq_init_effective_affinity
genirq: GENERIC_IRQ_EFFECTIVE_AFF_MASK depends on SMP
genirq: GENERIC_IRQ_IPI depends on SMP
irqchip/mips-gic: Only register IPI domain when SMP is enabled
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* irq/stm32-exti-updates:
: .
: stm32-exti updates courtesy of Antonio Borneo:
:
: "This series address some code fix for irq-stm32-exti driver and
: simplifies the table that remaps the interrupts from exti to gic."
:
: Also comes with an additional change to irq_chip_request_resources_parent(),
: making it possible to omit the callback in hierarchies.
: .
irqchip/stm32-exti: Simplify irq description table
irqchip/stm32-exti: Read event trigger type from event_trg register
irqchip/stm32-exti: Tag emr register as undefined for stm32mp15
irqchip/stm32-exti: Prevent illegal read due to unbounded DT value
irqchip/stm32-exti: Fix irq_mask/irq_unmask for direct events
irqchip/stm32-exti: Fix irq_set_affinity return value
genirq: Don't return error on missing optional irq_request_resources()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add IRQ domain to RZ/G2L pinctrl driver to handle GPIO interrupt.
GPIO0-GPIO122 pins can be used as IRQ lines but only 32 pins can be
used as IRQ lines at a given time. Selection of pins as IRQ lines
is handled by IA55 (which is the IRQC block) which sits in between the
GPIO and GIC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220707182314.66610-7-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Allow free() callback to be overridden from irq_domain_ops for
hierarchical chips.
This allows drivers to free up resources which are allocated during
child_to_parent_hwirq()/populate_parent_alloc_arg() callbacks.
On Renesas RZ/G2L platform a bitmap is maintained for TINT slots, a slot
is allocated in child_to_parent_hwirq() callback which is freed up in free
callback hence this override.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220707182314.66610-5-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Add a driver for the Renesas RZ/G2L Interrupt Controller.
This supports external pins being used as interrupts. It supports
one line for NMI, 8 external pins and 32 GPIO pins (out of 123)
to be used as IRQ lines.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220707182314.66610-4-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
The gpiolib is unique in the way it uses intermediate fwspecs
when feeding an interrupt specifier to the parent domain, as it
relies on the populate_parent_alloc_arg() callback to perform
a dynamic allocation.
This is pretty inefficient (we free the structure almost immediately),
and the only reason this isn't a stack allocation is that our
ThunderX friend uses MSIs rather than a FW-constructed structure.
Let's solve it by providing a new type composed of the union
of a struct irq_fwspec and a msi_info_t, which satisfies both
requirements. This allows us to use a stack allocation, and we
can move the handful of users to this new scheme.
Also perform some additional cleanup, such as getting rid of the
stub versions of the irq_domain_translate_*cell helpers, which
are never used when CONFIG_IRQ_DOMAIN_HIERARCHY isn't selected.
Tested on a Tegra186.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Daniel Palmer <daniel@thingy.jp>
Cc: Romain Perier <romain.perier@gmail.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Robert Richter <rric@kernel.org>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220707182314.66610-2-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
In preparation for region provisioning all device decoders need to be
enumerated since DPA allocations are calculated by summing the
capacities of all decoders in a set. I.e. the programming for decoder[N]
depends on the state of decoder[N-1], so skipping over decoders that
fail to initialize prevents accurate DPA accounting.
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
[djbw: reword changelog]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603879664.551046.6863805202478861026.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
To date the per-device-partition DPA range information has only been
used for enumeration purposes. In preparation for allocating regions
from available DPA capacity, convert those ranges into DPA-type resource
trees.
With resources and the new add_dpa_res() helper some open coded end
address calculations and debug prints can be cleaned.
The 'cxlds->pmem_res' and 'cxlds->ram_res' resources are child resources
of the total-device DPA space and they in turn will host DPA allocations
from cxl_endpoint_decoder instances (tracked by cxled->dpa_res).
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603878921.551046.8127845916514734142.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Interleave granularity and ways have CXL specification defined encodings.
Promote the conversion helpers to a common header, and use them to
replace other open-coded instances.
Force caller to consider the error case of the conversion similarly to
other conversion helpers like kstrto*().
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603875016.551046.17236943065932132355.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This helper was only used to identify the object type for lockdep
purposes. Now that lockdep support is done with explicit lock classes,
this helper can be dropped.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603874340.551046.15491766127759244728.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Root decoders are responsible for hosting the available host address
space for endpoints and regions to claim. The tracking of that available
capacity can be done in iomem_resource directly. As a result, root
decoders no longer need to host their own resource tree. The
current ->platform_res attribute was added prematurely.
Otherwise, ->hpa_range fills the role of conveying the current decode
range of the decoder.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603873619.551046.791596854070136223.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for growing a ->dpa_range attribute for endpoint
decoders, rename the current ->decoder_range to the more descriptive
->hpa_range.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603872867.551046.2170426227407458814.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Save a few characters and use the already initialized local variable.
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603872171.551046.913207574344536475.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
pinctrl: renesas: Updates for v5.20 (take two)
- Add support for the RZ/V2M and R-Car V4H SoCs,
- Miscellaneous fixes and improvements.
|
|
Remove contact information.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20220613064127.220416-4-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Saving/restoring interrupt and wake status bits across suspend can
cause the suspend to fail if an IRQ is serviced across the
suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Fixes: 79d2c8bede2c ("pinctrl/amd: save pin registers over suspend/resume")
Link: https://lore.kernel.org/r/20220613064127.220416-3-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use devm_platform_get_and_ioremap_resource() to simplify code.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20220613064127.220416-2-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
intel-pinctrl for v5.20-1
* Update MAINTAINERS to set the Intel pin control status to Supported
* Switch Intel pin control drivers to use struct pingroup
The following is an automated git shortlog grouped by driver:
baytrail:
- Switch to to embedded struct pingroup
cherryview:
- Switch to to embedded struct pingroup
intel:
- Add Intel Meteor Lake pin controller support
- Drop no more used members of struct intel_pingroup
- Switch to to embedded struct pingroup
- Embed struct pingroup into struct intel_pingroup
lynxpoint:
- Switch to to embedded struct pingroup
MAINTAINERS:
- Update Intel pin control to Supported
Merge branch 'ib-v5.20-amd-pinctrl':
- Merge branch 'ib-v5.20-amd-pinctrl'
merrifield:
- Switch to to embedded struct pingroup
|
|
Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips.
Following this change the following warning is now observed for the SPMI
PMIC pinctrl driver:
gpio gpiochip1: (200f000.spmi:pmic@0:gpio@c000): not an immutable chip, please consider fixing it!
Fix this by making the irqchip in the SPMI PMIC pinctrl driver immutable.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220624195112.894916-1-robimarko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The upcoming region provisioning implementation has a need to
dereference port->uport during the port unregister flow. Specifically,
endpoint decoders need to be able to lookup their corresponding memdev
via port->uport.
The existing ->dead flag was added for cases where the core was
committed to tearing down the port, but needed to drop locks before
calling device_unregister(). Reuse that flag to indicate to
delete_endpoint() that it has no "release action" work to do as
unregister_port() will handle it.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Link: https://lore.kernel.org/r/165603871491.551046.6682199179541194356.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Pull i2c fixes from Wolfram Sang:
"Two I2C driver bugfixes preventing resource leaks"
* tag 'i2c-for-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cadence: Unregister the clk notifier in error path
i2c: piix4: Fix a memory leak in the EFCH MMIO support
|
|
Always run fbdev removal first to remove simpledrm via sysfb_disable().
This clears the internal state.
The later call to drm_aperture_detach_drivers() then does nothing.
Otherwise, with drm_aperture_detach_drivers() running first, the call to
sysfb_disable() uses inconsistent state.
Example backtrace show below:
BUG: KASAN: use-after-free in device_del+0x79/0x5f0
Read of size 8 at addr ffff888108185050 by task systemd-udevd/311
CPU: 0 PID: 311 Comm: systemd-udevd Tainted: G E 5.19.0-rc2-1-default+ #1689
Hardware name: HP ProLiant DL120 G7, BIOS J01 04/21/2011
Call Trace:
device_del+0x79/0x5f0
platform_device_del.part.0+0x19/0xe0
platform_device_unregister+0x1c/0x30
sysfb_disable+0x2d/0x70
remove_conflicting_framebuffers+0x1c/0xf0
remove_conflicting_pci_framebuffers+0x130/0x1a0
drm_aperture_remove_conflicting_pci_framebuffers+0x86/0xb0
mgag200_pci_probe+0x2d/0x140 [mgag200]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 873eb3b11860 ("fbdev: Disable sysfb device registration when removing conflicting FBs")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
- Use DEFINE_SIMPLE_DEV_PM_OPS() instead of the SIMPLE_DEV_PM_OPS()
macro. This makes it possible to remove the __maybe_unused flags on
the callback functions.
- Since we only have callbacks for suspend/resume, we can conditionally
compile the dev_pm_ops structure for when CONFIG_PM_SLEEP is enabled;
so use the pm_sleep_ptr() macro instead of pm_ptr().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708205406.96473-7-paul@crapouillou.net
|
|
Avoid requesting a full modeset if the sharpness property is not
modified, because then we don't actually need it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708205406.96473-5-paul@crapouillou.net
|
|
Add support for the JZ4760 and JZ4760B SoCs to the ingenic-drm display
driver.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708205406.96473-4-paul@crapouillou.net
|
|
The previous "GPL v2" string is deprecated. For more info, see commit
bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708205406.96473-3-paul@crapouillou.net
|
|
Add timings and panel description for the Samsung LTL101AL01 panel.
Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220516193709.10037-2-martin.juecker@gmail.com
|
|
As Rn covers single-channel formats with a direct relationship between
channel value and brightness, and Cn can be any colors, there are
currently no fourcc codes to describe single-channel formats with an
inverse relationship between channel value and brightness.
Introduce fourcc codes for a single-channel frame buffer format with
two, four, sixteen, or 256 brightness ("darkness") levels, where there
is an inverse relationship between channel value and brightness.
As the number of bits per pixel may be less than eight, some of these
formats rely on proper block handling for the calculation of bits per
pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for grayscale (2, 4, and 16 levels) images in
the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
bilevel and grayscale (16 levels) images in the TIFF 6.0 Specification,
and is also used for monochrome images in the PBM file format,
monochrome Linux frame buffer logos, and BDF and PSF (Linux kernel) font
files.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6119f3abeda9baaa88652843960adc032da276b4.1657294931.git.geert@linux-m68k.org
|
|
Introduce fourcc codes for single-channel frame buffer formats with two,
four, and sixteen brightness levels, where there is a direct
relationship between channel value and brightness.
As the number of bits per pixel is less than eight, these rely on proper
block handling for the calculation of bits per pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for grayscale (2, 4, and 16 levels) images in
the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
bilevel and grayscale (16 levels) images in the TIFF 6.0 Specification,
and is also used for monochrome images in the PBM file format,
monochrome Linux frame buffer logos, and BDF and PSF (Linux kernel) font
files.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/96561a88e53c59cac72e66642bf4c097aacefd18.1657294931.git.geert@linux-m68k.org
|
|
The AFBC helpers derive the number of bits per pixel from the deprecated
drm_format_info.cpp[] field, which does not take into account block
sizes.
Fix this by using the actual number of bits per pixel instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b1d938d903157627c4ac101df92a1f3bf8ebe83d.1657294931.git.geert@linux-m68k.org
|
|
Add support for color-indexed frame buffer formats with two, four, and
sixteen colors to the DRM framebuffer helper functions:
1. Add support for 1, 2, and 4 bits per pixel to the damage helper,
2. For color-indexed modes, the length of the color bitfields must be
set to the color depth, else the logo code may pick a logo with too
many colors. Drop the incorrect DAC width comment, which
originates from the i915 driver.
3. Accept C[124] modes when validating or filling in struct
fb_var_screeninfo, and use the correct number of bits per pixel.
4. Set the visual to FB_VISUAL_PSEUDOCOLOR for all color-indexed
modes.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/db3e80b445df661ff0cd7e698507a8d24a4c867e.1657294931.git.geert@linux-m68k.org
|
|
Introduce fourcc codes for color-indexed frame buffer formats with two,
four, and sixteen colors, and provide a mapping from bits per pixel and
depth to fourcc codes.
As the number of bits per pixel is less than eight, these rely on proper
block handling for the calculation of bits per pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for indexed-color (2, 4, and 16 colors) images
in the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
palette-color (16 colors) images in the TIFF 6.0 Specification, and is
also used for 16-color Linux frame buffer logos.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/3d88ca7ad32ff3ff3469c10f0b36c312ea233a33.1657294931.git.geert@linux-m68k.org
|
|
When userspace queries the properties of a frame buffer, the number of
bits per pixel is derived from the deprecated drm_format_info.cpp[]
field, which does not take into account block sizes.
Fix this by using the actual number of bits per pixel instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b612780feef200b7f914a674db28ed227e7cdc64.1657294931.git.geert@linux-m68k.org
|
|
When allocating a frame buffer, the number of bits per pixel needed is
derived from the deprecated drm_format_info.cpp[] field. While this may
work for formats using less than 8 bits per pixel, it does lead to a
large overallocation.
Reduce memory consumption by using the actual number of bits per pixel
instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/eabcf4f298184dabe46823fcf5ceffa1da0ec7ef.1657294931.git.geert@linux-m68k.org
|
|
Add a flag to struct drm_format_info to indicate if a format is
color-indexed, similar to the existing .is_yuv flag.
This way generic code and drivers can just check this flag, instead of
checking against a list of fourcc formats.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/90cd390b2b4d481661f966de7b504f1702d80dfd.1657294931.git.geert@linux-m68k.org
|
|
Add a helper to retrieve the actual number of bits per pixel for a
plane, taking into account the number of characters and pixels per
block for tiled formats.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1cae5ebc28513ec1c91c66b00647ce3ca23bfba7.1657294931.git.geert@linux-m68k.org
|
|
If there is a MAC address specified in the device tree, then
use it. This is already perfectly legal to specify in accordance
with the generic ethernet-controller.yaml schema.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the firmware does not provide a MAC address to the driver,
fall back to generating a random MAC address.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TCP packets will be dropped if the segments number in the tx skb
exceeds limitation when sending iperf3 traffic with --zerocopy option.
we make the following changes:
Get nr_frags in nfp_nfdk_tx_maybe_close_block instead of passing from
outside because it will be changed after skb_linearize operation.
Fill maximum dma_len in first tx descriptor to make sure the whole
head is included in the first descriptor.
Fixes: c10d12e3dce8 ("nfp: add support for NFDK data path")
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All implementations return 0 and the return value of mipi_dsi_drv_remove()
is ignored anyhow.
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-4-u.kleine-koenig@pengutronix.de
|
|
Returning an error code from a mipi_dsi remove callback fails, this is
silently ignored. (mipi_dsi_drv_remove() propagates the return value to
device_remove() which ignores it.) So emit an error code in the driver
remove function and return 0.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-3-u.kleine-koenig@pengutronix.de
|
|
panel_simple_remove() returns zero unconditionally. Make it return no value
instead making more obvious what happens in the callers.
This is a preparation for making platform and mipi-dsi remove callbacks
return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-2-u.kleine-koenig@pengutronix.de
|
|
It's possible that dev_set_name() returns -ENOMEM, catch and handle this.
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220708015948.4091-1-liubo03@inspur.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
On ACPI boards, when we cannot get the GPIOs to do a reset ourselves
if necessary, call acpi_device_fix_up_power() to force the ACPI _PS0
method to run.
On some devices without proper GPIO descriptions this will reset
the touchscreen for us and this may be necessary for us to be able
to communicate to the touchscreen at all.
Specifically on an Aya Neo Next this change will cause the _PS0()
ACPI function to call INIT() which does:
Method (INIT, 0, Serialized)
{
TP_I = 0x00A50000
TP_R = 0x00A50000
Sleep (0x0A)
TP_I = 0x00E50000
Sleep (One)
TP_R = 0x00E50000
Sleep (0x06)
TP_I = 0x00A50000
Sleep (0x3C)
TP_I = 0x00041800
}
On older kernels the ACPI core assumed a power-on was necessary by itself
and would run _PS0 before our probe function runs, which can be seen from
the GPIO pin ctrl registers in /sys/kernel/debug/gpio which match
the above hex values with older kernels.
With newer kernels before this change the GPIO pin ctrl registers do not
match, indicating INIT() has not run and probing the touchscreen fails.
This change makes Linux run _PS0() again fixing the touchscreen not working
on the Aya Neo Next.
Reported-and-tested-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220618210233.208027-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Like on other Acer devices, the wifi, bluetooth and touchpad on/off toggle
hotkeys on the Acer AO532 do not send any events when the dritek extensions
are not enabled.
Add a quirk to enable the dritek extensions on this netbook model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220418200949.6009-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
bcm63xx_enetsw_driver and bcm63xx_enet_driver are only used in
bcm63xx_enet.c now, change them to static.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220707135801.1483941-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When we are operating in SGMII inband mode, it implies that there is a
PHY connected, and the ethtool advertisement for autoneg applies to
the PHY, not the SGMII link. When in 1000base-X mode, then this applies
to the 802.3z link and needs to be applied to the PCS.
Fix this.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1o9Ng2-005Qbe-3H@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Marc Zyngier
Samuel Holland
Lad Prabhakar
Ben Widawsky
Dan Williams
Linus Walleij
Basavaraj Natikar
Robert Marko
Linus Torvalds
Thomas Zimmermann
Paul Cercueil
Martin Jücker
Geert Uytterhoeven
Baowen Zheng
Uwe Kleine-König
Bo Liu
Hans de Goede
Yang Yingliang
Russell King (Oracle)