| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The current definition of a sensor mode defines timings as follows:
- hact, vact: Visible width and height
- htot, vtot: Total sizes including blankings
This makes difficult to clearly separate the visible sizes from the
blankings and to make the vertical blanking programmable.
Rework the sensor modes sizes definition to:
- Report the analog crop sizes
- Report the visible crop size
- Report the total pixels per line as HBLANK is fixed
- Report the VBLANK value to make it programmable
Also modify the ov5640_set_timings() function to program all the
windowing registers are remove them from the per-mode register-value
tables.
Do not change the timing values from the ones reported in the register
tables to maintain bisectability.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Re-work the ov5640_set_mipi_pclk() function to calculate the
PLL configuration using the pixel_rate and link_freq values set at
s_fmt time.
Rework the DVP clock mode settings to calculate the pixel clock
internally and remove the assumption on the 16bpp format.
Tested in MIPI CSI-2 mode with 1 and 2 data lanes with:
- all the sensor supported resolutions in UYVY, RGB565 and MJPEG formats.
- resolutions >= 1280x720 in RAW Bayer format.
- resolutions < 1280x720 in RGB888 format.
[Rework pclk_period and link_freq computation]
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After having set a new format re-calculate the pixel_rate and link_freq
control values and update them when in MIPI mode.
Take into account the limitation of the link frequency having to be
strictly smaller than 1GHz when computing the desired link_freq, and
adjust the resulting pixel_rate acounting for the clock tree
configuration.
[Adjust link_freq calculation]
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add the V4L2_CID_LINK_FREQ control to the ov5640 driver.
Make the control read-only for the moment.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Associate the bit depth to each format supported by the sensor.
The bpp will be used to calculate the line length.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Checking if the sensor is used in DVP or MIPI CSI-2 mode is a repeated
pattern which is about to be repeated more often.
Provide an inline function to shortcut that.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The array of supported modes is close to unreadable.
Re-arrange it giving it some room to breath.
Cosmetic change only.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add to each mode supported by the sensor the ideal pixel rate, as
defined by Table 2.1 in the chip manual.
The ideal pixel rate will be used to compute the MIPI CSI-2 clock tree.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon-kit
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support of 1X16 serial pixel formats in order to support
CSI-2 camera sensor exposing 1x16 pixel formats only.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Expose RGB & YUV 1X16 serial pixel format variants to comply
with CSI-2 camera sensor pixel formats.
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Those two formats were missing in the list of supported MBUS
formats.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support of pixel clock polarity.
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The s_stream callback had several issues:
- If pm_runtime_get_sync() fails, the usage_count is not put.
- The sensor wasn't suspended if s_stream(subdev, 1) failed.
Fix this.
Fixes: ("media: i2c: Add pm_runtime support to ov7251")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The A83T supports MIPI CSI-2 with a composite controller, covering
both the protocol logic and the D-PHY implementation. This controller
seems to be found on the A83T only and probably was abandoned since.
This implementation splits the protocol and D-PHY registers and
uses the PHY framework internally. The D-PHY is not registered as a
standalone PHY driver since it cannot be used with any other
controller.
There are a few notable points about the controller:
- The initialisation sequence involes writing specific magic init
values that do not seem to make any particular sense given the
concerned register fields;
- Interrupts appear to be hitting regardless of the interrupt mask
registers, which can cause a serious flood when transmission errors
occur.
Only 8-bit and 10-bit Bayer formats are currently supported.
While up to 4 internal channels to the CSI controller exist, only one
is currently supported by this implementation.
This work is based on the first version of the driver submitted by
Kévin L'hôpital, which was adapted to mainline from the Allwinner BSP.
This version integrates MIPI CSI-2 support as a standalone V4L2 subdev
instead of merging it in the sun6i-csi driver.
It was tested on a Banana Pi M3 board with an OV8865 sensor in a 4-lane
configuration.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
ath.git patches for v5.20. Major changes:
ath9k
* fix use-after-free in ath9k_hif_usb_rx_cb()
|
|
The A31 MIPI CSI-2 controller is a dedicated MIPI CSI-2 bridge
found on Allwinner SoCs such as the A31 and V3/V3s.
It is a standalone block, connected to the CSI controller on one side
and to the MIPI D-PHY block on the other. It has a dedicated address
space, interrupt line and clock.
It is represented as a V4L2 subdev to the CSI controller and takes a
MIPI CSI-2 sensor as its own subdev, all using the fwnode graph and
media controller API.
Only 8-bit and 10-bit Bayer formats are currently supported.
While up to 4 internal channels to the CSI controller exist, only one
is currently supported by this implementation.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fixes for TEE subsystem
A fix for the recently merged commit ed8faf6c8f8c ("optee: add
OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG").
Two small fixes in comment, repeated words etc.
* tag 'tee-fixes-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: tee_get_drvdata(): fix description of return value
optee: Remove duplicate 'of' in two places.
optee: smc_abi.c: fix wrong pointer passed to IS_ERR/PTR_ERR()
Link: https://lore.kernel.org/r/20220708134607.GA901814@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The RK3566 and RK3568 SoCs come with a small Hantro instance which is
solely dedicated to encoding. This patch adds the necessary structs to
the Hantro driver to allow the JPEG encoder of it to function.
Through some sleuthing through the vendor's MPP source code and after
closer inspection of the TRM, it was determined that the hardware likely
supports VP8 and H.264 as well.
Tested with the following GStreamer command:
gst-launch-1.0 videotestsrc ! v4l2jpegenc ! matroskamux ! \
filesink location=foo.mkv
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In reset vpu core, driver will wait for a response event,
but if there are still some events unhandled,
they will be handled first, driver may acquire core lock for that.
So if we do reset in core lock, it may led to reset timeout.
Fixes: 9f599f351e86a ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
there is unexpected word "the" in comments need to remove
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220621080240.42198-1-jiangjian@cdjrlc.com
|
|
The chroma order of P010 is `CbCr`,
match with the descriptions in `include/uapi/linux/videodev2.h` and the
documentation.
Fixes: 5374d8fb75f3 ("media: Add P010 video format")
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There is a typo(isn't') in comments.
It maybe 'isn't' instead of 'isn't''.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220704030004.16484-1-jiaming@nfschina.com
|
|
The mdp_ipi_comm structure defines a command that is either
PROCESS (start processing) or DEINIT (destroy instance); we
are using this one to send PROCESS or DEINIT commands from Linux
to an MDP instance through a VPU write but, while the first wants
us to stay 4-bytes aligned, the VPU instead requires an 8-bytes
data alignment.
Keeping in mind that these commands are executed immediately
after sending them (hence not chained with others before the
VPU/MDP "actually" start executing), it is fine to simply add
a padding of 4 bytes to this structure: this keeps the same
performance as before, as we're still stack-allocating it,
while avoiding hackery inside of mtk-vpu to ensure alignment
bringing a definitely bigger performance impact.
Fixes: c8eb2d7e8202 ("[media] media: Add Mediatek MDP Driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Reviewed-by: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
there is an unexpected word 'a' in the comments that need to be dropped
file - drivers/media/usb/pvrusb2/pvrusb2-hdw.c
line - 5044
But now it's a a chicken and egg problem...) */
changed to:
But now it's a chicken and egg problem...) */
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
there is an unexpected word 'a' in the comments that need to be dropped
file - drivers/media/platform/ti/cal/cal-camerarx.c
line - 308
* DRA80xM TRMs have a a slightly simplified sequence.
changed to:
* DRA80xM TRMs have a slightly simplified sequence.
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
there is an unexpected word 'is' in the comments that need to be dropped
file - drivers/media/usb/gspca/spca501.c
line - 491
* This is is for the 3com HomeConnect Lite which is spca501a based.
changed to:
* This is for the 3com HomeConnect Lite which is spca501a based.
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove the repeated word 'and' from comments
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
No functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220706100627.6534-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for Microchip OTP controller available on SAMA7G5. The OTPC
controls the access to a non-volatile memory. The memory behind OTPC is
organized into packets, packets are composed by a fixed length header
(4 bytes long) and a variable length payload (payload length is available
in the header). When software request the data at an offset in memory
the OTPC will return (via header + data registers) the whole packet that
has a word at that offset. For the OTP memory layout like below:
offset OTP Memory layout
. .
. ... .
. .
0x0E +-----------+ <--- packet X
| header X |
0x12 +-----------+
| payload X |
0x16 | |
| |
0x1A | |
+-----------+
. .
. ... .
. .
if user requests data at address 0x16 the data started at 0x0E will be
returned by controller. User will be able to fetch the whole packet
starting at 0x0E (or parts of the packet) via proper registers. The same
packet will be returned if software request the data at offset 0x0E or
0x12 or 0x1A.
The OTP will be populated by Microchip with at least 2 packets first one
being boot configuration packet and the 2nd one being temperature
calibration packet. The packet order will be preserved b/w different chip
revisions but the packet sizes may change.
For the above reasons and to keep the same software able to work on all
chip variants the read function of the driver is working with a packet
id instead of an offset in OTP memory.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220706100627.6534-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The patchset in [1] exported some definitions to binder_internal.h in
order to make the debugfs entries such as 'stats' and 'transaction_log'
available in a binderfs instance. However, the DEFINE_SHOW_ATTRIBUTE
macro expands into a static function/variable pair, which in turn get
redefined each time a source file includes this internal header.
This problem was made evident after a report from the kernel test robot
<lkp@intel.com> where several W=1 build warnings are seen in downstream
kernels. See the following example:
include/../drivers/android/binder_internal.h:111:23: warning: 'binder_stats_fops' defined but not used [-Wunused-const-variable=]
111 | DEFINE_SHOW_ATTRIBUTE(binder_stats);
| ^~~~~~~~~~~~
include/linux/seq_file.h:174:37: note: in definition of macro 'DEFINE_SHOW_ATTRIBUTE'
174 | static const struct file_operations __name ## _fops = { \
| ^~~~~~
This patch fixes the above issues by moving back the definitions into
binder.c and instead creates an array of the debugfs entries which is
more convenient to share with binderfs and iterate through.
[1] https://lore.kernel.org/all/20190903161655.107408-1-hridya@google.com/
Fixes: 0e13e452dafc ("binder: Add stats, state and transactions files")
Fixes: 03e2e07e3814 ("binder: Make transaction_log available in binderfs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220701182041.2134313-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
see warnings:
| drivers/misc/eeprom/idt_89hpesx.c:570:5: error: format specifies type
| 'unsigned char' but the argument has type 'u16' (aka 'unsigned short')
| [-Werror,-Wformat] memaddr);
-
| drivers/misc/eeprom/idt_89hpesx.c:579:5: error: format specifies type
| 'unsigned char' but the argument has type 'u16' (aka 'unsigned short')
| [-Werror,-Wformat] memaddr);
-
| drivers/misc/eeprom/idt_89hpesx.c:814:4: error: format specifies type
| 'unsigned short' but the argument has type 'unsigned int'
| [-Werror,-Wformat] CSR_REAL_ADDR(csraddr));
There's an ongoing movement to eventually enable the -Wformat flag for
clang. See: https://github.com/ClangBuiltLinux/linux/issues/378
The format specifier for idt_89hpesx.c:570 and 579 was `0x%02hhx`. The
part we care about `%hhx` describes a single byte format, wherein the
leftmost byte of our u16 type (of which memaddr is) is truncated.
example:
```
uint16_t x = 0xbabe;
printf("%hhx\n", x);
// output is: be
// we lost 'ba'
```
There exists a similar issue at idt_89hpesx.c:814 which involves the
CSR_REAL_ADDR macro. This macro returns a u16 but due to default
argument promotion for variadic functions (printf-like) actually
provides an int to the dev_err method.
My proposed solution is to expand the width of the format specifier to
fully encompass the provided argument (which is promoted to an int, see
below). I opted for '%x' as this specifies an unsigned hexadecimal
integer which, with a guarantee, can represent all the values of a u16.
As per C11 6.3.1.1:
(https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf)
`If an int can represent all values of the original type ..., the
value is converted to an int; otherwise, it is converted to an
unsigned int. These are called the integer promotions.`
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20220701232031.2639134-1-justinstitt@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Spelling mistakes (triple letters) in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220706101131.6934-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use ida_alloc()/ida_free() instead of deprecated
ida_simple_get()/ida_simple_remove() .
Signed-off-by: keliu <liuke94@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220706101131.6934-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the Trace Hub in Raptor Lake-S CPU.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-7-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the Trace Hub in Raptor Lake-S PCH.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the Trace Hub in Meteor Lake-P.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP") there's
a chance of DMA buffer getting allocated via vmalloc(), which messes up
the mmapping code:
> RIP: msc_mmap_fault [intel_th_msu]
> Call Trace:
> <TASK>
> __do_fault
> do_fault
...
Fix this by accounting for vmalloc possibility.
Fixes: ba39bd830605 ("intel_th: msu: Switch over to scatterlist")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The return value of dma_alloc_coherent() needs to be checked.
To avoid use of null pointer in sg_set_buf() in case of the failure of
alloc.
Fixes: f220df66f676 ("intel_th: msu-sink: An example msu buffer "sink"")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If an error occurs after calling 'pci_alloc_irq_vectors()',
'pci_free_irq_vectors()' must be called as already done in the remove
function.
Fixes: 7b7036d47c35 ("intel_th: pci: Use MSI interrupt signalling")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20220705082637.59979-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's more cleanly to use for_each_set_bit() instead of opencoding it.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/r/20220704125044.2192381-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
While at it, remove a useless cast in a bitmap_empty() call.
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ef49726d60f6a531428609f60a2398b6c3d9a26e.1656966181.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
napi_build_skb() reuses NAPI skbuff_head cache in order to save some
cycles on freeing/allocating skbuff_heads on every new Rx or completed
Tx.
Use napi_consume_skb() to feed the cache with skbuff_heads of completed
Tx, so it's never empty. The budget parameter is added to indicate NAPI
context, as a value of zero can be passed in the case of netpoll.
Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sudeep writes:
cacheinfo and arch_topology updates for v5.20
These are updates to fix some discrepancies we have in the CPU topology
parsing from the device tree /cpu-map node and the divergence from the
behaviour on a ACPI enabled platform. The expectation is that both DT
and ACPI enabled systems must present consistent view of the CPU topology.
The current assignment of generated cluster count as the physical package
identifier for each CPU is wrong. The device tree bindings for CPU
topology supports sockets to infer the socket or physical package
identifier for a given CPU. It is now being made use of you address the
issue. These updates also assigns the cluster identifier as parsed from
the device tree cluster nodes within /cpu-map without support for
nesting of the clusters as there are no such reported/known platforms.
In order to be on par with ACPI PPTT physical package/socket support,
these updates also include support for socket nodes in /cpu-map.
The only exception is that the last level cache id information can be
inferred from the same ACPI PPTT while we need to parse CPU cache nodes
in the device tree. The cacheinfo changes here is to enable the re-use
of the cacheinfo to detect the cache attributes for all the CPU quite
early even before the scondardaries are booted so that the information
can be used to build the schedular domains especially the last level
cache(LLC).
* tag 'arch-cache-topo-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (21 commits)
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
arch_topology: Don't set cluster identifier as physical package identifier
arch_topology: Avoid parsing through all the CPUs once a outlier CPU is found
arch_topology: Check for non-negative value rather than -1 for IDs validity
arch_topology: Set thread sibling cpumask only within the cluster
arch_topology: Drop LLC identifier stash from the CPU topology
arm64: topology: Remove redundant setting of llc_id in CPU topology
arch_topology: Use the last level cache information from the cacheinfo
arch_topology: Add support to parse and detect cache attributes
cacheinfo: Align checks in cache_shared_cpu_map_{setup,remove} for readability
cacheinfo: Use cache identifiers to check if the caches are shared if available
cacheinfo: Allow early detection and population of cache attributes
cacheinfo: Add support to check if last level cache(LLC) is valid or shared
cacheinfo: Move cache_leaves_are_shared out of CONFIG_OF
cacheinfo: Add helper to access any cache index for a given CPU
cacheinfo: Use of_cpu_device_node_get instead cpu_dev->of_node
...
|
|
There is a race in pty_write(). pty_write() can be called in parallel
with e.g. ioctl(TIOCSTI) or ioctl(TCXONC) which also inserts chars to
the buffer. Provided, tty_flip_buffer_push() in pty_write() is called
outside the lock, it can commit inconsistent tail. This can lead to out
of bounds writes and other issues. See the Link below.
To fix this, we have to introduce a new helper called
tty_insert_flip_string_and_push_buffer(). It does both
tty_insert_flip_string() and tty_flip_buffer_commit() under the port
lock. It also calls queue_work(), but outside the lock. See
71a174b39f10 (pty: do tty_flip_buffer_push without port->lock in
pty_write) for the reasons.
Keep the helper internal-only (in drivers' tty.h). It is not intended to
be used widely.
Link: https://seclists.org/oss-sec/2022/q2/155
Fixes: 71a174b39f10 (pty: do tty_flip_buffer_push without port->lock in pty_write)
Cc: 一只狗 <chennbnbnb@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220707082558.9250-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We will need this new helper in the next patch.
Cc: Hillf Danton <hdanton@sina.com>
Cc: 一只狗 <chennbnbnb@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220707082558.9250-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
TLB sync timeouts can be due to various reasons such as TBU power down
or pending TCU/TBU invalidation/sync and so on. Debugging these often
require dumping of some implementation defined registers to know the
status of TBU/TCU operations and some of these registers are not
accessible in non-secure world such as from kernel and requires SMC
calls to read them in the secure world. So, add this debug support
to dump implementation defined registers for TLB sync timeout issues.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220708094230.4349-1-quic_saipraka@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
gsmld_poll() currently fails to handle the following corner cases correctly:
- remote party closed the associated tty
Add the missing checks and map those to EPOLLHUP.
Reorder the checks to group them by their reaction.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220707113223.3685-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current implementation constipates all transmission paths during flow
control except for flow control frames. However, these may not be located
at the beginning of the transmission queue of the control channel.
Ensure that flow control frames in the transmission queue for the control
channel are always handled even if constipated by skipping through other
messages.
Fixes: 0af021678d5d ("tty: n_gsm: fix deadlock and link starvation in outgoing data path")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220707113223.3685-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.3.3 defines the DM response. There exists
no DM command. However, the current implementation incorrectly sends DM as
command in case of unexpected UIH frames in gsm_queue().
Correct this behavior by always sending DM as response.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220707113223.3685-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.7.3 states that the valid range for the
maximum number of retransmissions (N2) is from 0 to 255 (both including).
gsm_dlci_t1() handles this number incorrectly by performing N2 - 1
retransmission attempts. Setting N2 to zero results in more than 255
retransmission attempts.
Fix gsm_dlci_t1() to comply with 3GPP 27.010.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220707113223.3685-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Jacopo Mondi
Hugues Fruchet
Hugues Fruchet
Alain Volmat
Sakari Ailus
Paul Kocialkowski
Kalle Valo
Arnd Bergmann
Nicolas Frattaroli
Ming Qian
Jiang Jian
Sebastian Fricke
Zhang Jiaming
AngeloGioacchino Del Regno
Claudiu Beznea
Carlos Llamas
Justin Stitt
Julia Lawall
keliu
Alexander Shishkin
Jiasheng Jiang
Christophe JAILLET
Yang Yingliang
Sieng-Piaw Liew
Greg Kroah-Hartman
Jiri Slaby
Sai Prakash Ranjan
Daniel Starke