| Age | Commit message (Collapse) | Author | Files | Lines |
|
All callers of dm_table_get_target() are expected to do proper bounds
checking on the index they pass.
Move dm_table_get_target() to dm-core.h to make it extra clear that only
DM core code should be using it. Switch it to be inlined while at it.
Standardize all DM core callers to use the same for loop pattern and
make associated variables as local as possible. Rename some variables
(e.g. s/table/t/ and s/tgt/ti/) along the way.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
More efficient and readable to just access table->num_targets directly.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit 61b6e2e5321d ("dm: fix BLK_STS_DM_REQUEUE handling when dm_io
represents split bio") reverted DM core's bio splitting back to using
bio_split()+bio_chain() because it was found that otherwise DM's
BLK_STS_DM_REQUEUE would trigger a live-lock waiting for bio
completion that would never occur.
Restore using bio_trim()+bio_inc_remaining(), like was done in commit
7dd76d1feec7 ("dm: improve bio splitting and associated IO
accounting"), but this time with proper handling for the above
scenario that is covered in more detail in the commit header for
61b6e2e5321d.
Solve this issue by adding a two staged dm_io requeue mechanism that
uses the new dm_bio_rewind() via dm_io_rewind():
1) requeue the dm_io into the requeue_list added to struct
mapped_device, and schedule it via new added requeue work. This
workqueue just clones the dm_io->orig_bio (which DM saves and
ensures its end sector isn't modified). dm_io_rewind() uses the
sectors and sectors_offset members of the dm_io that are recorded
relative to the end of orig_bio: dm_bio_rewind()+bio_trim() are
then used to make that cloned bio reflect the subset of the
original bio that is represented by the dm_io that is being
requeued.
2) the 2nd stage requeue is same with original requeue, but
io->orig_bio points to new cloned bio (which matches the requeued
dm_io as described above).
This allows DM core to shift the need for bio cloning from bio-split
time (during IO submission) to the less likely BLK_STS_DM_REQUEUE
handling (after IO completes with that error).
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit 7759eb23fd98 ("block: remove bio_rewind_iter()") removed
a similar API for the following reasons:
```
It is pointed that bio_rewind_iter() is one very bad API[1]:
1) bio size may not be restored after rewinding
2) it causes some bogus change, such as 5151842b9d8732 (block: reset
bi_iter.bi_done after splitting bio)
3) rewinding really makes things complicated wrt. bio splitting
4) unnecessary updating of .bi_done in fast path
[1] https://marc.info/?t=153549924200005&r=1&w=2
So this patch takes Kent's suggestion to restore one bio into its original
state via saving bio iterator(struct bvec_iter) in bio_integrity_prep(),
given now bio_rewind_iter() is only used by bio integrity code.
```
However, saving off a copy of the 32 bytes bio->bi_iter in case rewind
needed isn't efficient because it bloats per-bio-data for what is an
unlikely case. That suggestion also ignores the need to restore
crypto and integrity info.
Add dm_bio_rewind() API for a specific use-case that is much more narrow
than the previous more generic rewind code that was reverted:
1) most bios have a fixed end sector since bio split is done from front
of the bio, if driver just records how many sectors between current
bio's start sector and the original bio's end sector, the original
position can be restored. Keeping the original bio's end sector
fixed is a _hard_ requirement for this interface!
2) if a bio's end sector won't change (usually bio_trim() isn't
called, or in the case of DM it preserves original bio), user can
restore the original position by storing sector offset from the
current ->bi_iter.bi_sector to bio's end sector; together with
saving bio size, only 8 bytes is needed to restore to original
bio.
3) DM's requeue use case: when BLK_STS_DM_REQUEUE happens, DM core
needs to restore to an "original bio" which represents the current
dm_io to be requeued (which may be a subset of the original bio).
By storing the sector offset from the original bio's end sector and
dm_io's size, dm_bio_rewind() can restore such original bio. See
commit 7dd76d1feec7 ("dm: improve bio splitting and associated IO
accounting") for more details on how DM does this. Leveraging this,
allows DM core to shift the need for bio cloning from bio-split
time (during IO submission) to the less likely BLK_STS_DM_REQUEUE
handling (after IO completes with that error).
4) Unlike the original rewind API, dm_bio_rewind() doesn't add .bi_done
to bvec_iter and there is no effect on the fast path.
Implement dm_bio_rewind() by factoring out clear helpers that it calls:
dm_bio_integrity_rewind, dm_bio_crypt_rewind and dm_bio_rewind_iter.
DM is able to ensure that dm_bio_rewind() is used safely but, given
the constraint that the bio's end must never change, other
hypothetical future callers may not take the same care. So make
dm_bio_rewind() and all supporting code local to DM to avoid risk of
hypothetical abuse. A "dm_" prefix was added to all functions to avoid
any namespace collisions.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Make it possible to set destination as well as source bandwidth. If the
*dst pointer is non-NULL. Right now it appears that we never make the
destination bw allocation call, which is inconsistent with the downstream
way of doing this.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220707093823.1691870-1-bryan.odonoghue@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Drivers should depend on rather than select their MFDs.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220707111753.16581-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cec_unregister_adapter() assumes that the underlying adapter ops are
callable. For example, if the CEC adapter currently has a valid physical
address, then the unregistration procedure will invalidate the physical
address by setting it to f.f.f.f. Whence the following kernel oops
observed after removing the adv7511 module:
Unable to handle kernel execution of user memory at virtual address 0000000000000000
Internal error: Oops: 86000004 [#1] PREEMPT_RT SMP
Call trace:
0x0
adv7511_cec_adap_log_addr+0x1ac/0x1c8 [adv7511]
cec_adap_unconfigure+0x44/0x90 [cec]
__cec_s_phys_addr.part.0+0x68/0x230 [cec]
__cec_s_phys_addr+0x40/0x50 [cec]
cec_unregister_adapter+0xb4/0x118 [cec]
adv7511_remove+0x60/0x90 [adv7511]
i2c_device_remove+0x34/0xe0
device_release_driver_internal+0x114/0x1f0
driver_detach+0x54/0xe0
bus_remove_driver+0x60/0xd8
driver_unregister+0x34/0x60
i2c_del_driver+0x2c/0x68
adv7511_exit+0x1c/0x67c [adv7511]
__arm64_sys_delete_module+0x154/0x288
invoke_syscall+0x48/0x100
el0_svc_common.constprop.0+0x48/0xe8
do_el0_svc+0x28/0x88
el0_svc+0x1c/0x50
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x15c/0x160
Code: bad PC value
---[ end trace 0000000000000000 ]---
Protect against this scenario by unregistering i2c_cec after
unregistering the CEC adapter. Duly disable the CEC clock afterwards
too.
Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-3-alvin@pqrs.dk
|
|
The ADV7511_REG_CEC_CTRL = 0xE2 register is part of the main register
map - not the CEC register map. As such, we shouldn't apply an offset to
the register address. Doing so will cause us to address a bogus register
for chips with a CEC register map offset (e.g. ADV7533).
Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612144854.2223873-2-alvin@pqrs.dk
|
|
Fix a kernel NULL pointer dereference reported by gpio kselftests.
linereq_free() can be called as part of the cleanup of a failed request,
at which time the desc for a line may not have been determined, so it
is unsafe to dereference without a check.
Add a check prior to dereferencing the line desc.
Fixes: 2068339a6c35 ("gpiolib: cdev: Add hardware timestamp clock type")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
When building this driver for an architecture that does not support
CONFIG_PM_SLEEP, such as hexagon, the following warnings occur:
drivers/soc/mediatek/mtk-svs.c:1481:12: error: unused function 'svs_suspend' [-Werror,-Wunused-function]
static int svs_suspend(struct device *dev)
^
drivers/soc/mediatek/mtk-svs.c:1515:12: error: unused function 'svs_resume' [-Werror,-Wunused-function]
static int svs_resume(struct device *dev)
^
2 errors generated.
This happens because SIMPLE_DEV_PM_OPS uses SET_SYSTEM_SLEEP_PM_OPS,
which evaluates to nothing when CONFIG_PM_SLEEP is not set, leaving the
functions unused in the eyes of the compiler.
This problem was rectified in commit 1a3c7bb08826 ("PM: core: Add new
*_PM_OPS macros, deprecate old ones") with new macros. Use
DEFINE_SIMPLE_DEV_PM_OPS to fix the warning while not changing
svs_pm_ops when CONFIG_PM_SLEEP is set.
Fixes: 681a02e95000 ("soc: mediatek: SVS: introduce MTK SVS engine")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220622175649.1856337-1-nathan@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
MediaTek SoCs have multiple MFG power-domains, exclusively used for
the GPU which, in turn, requires external power supplies: make sure
to have the MTK_SCPD_DOMAIN_SUPPLY cap on the two topmost MFGs to
allow voting for regulators on/off upon usage of these power domains.
This also ensures that the SRAM is actually powered and that we're
not relying on the bootloader leaving this supply on when performing
the first (and latter) poweron sequence for these domains' sram.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220623123850.110225-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Use the fbcon_info_from_console() wrapper which was added to kernel
v5.19 with commit 409d6c95f9c6 ("fbcon: Introduce wrapper for console->fb_info lookup").
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Verify that the fbdev or drm driver correctly adjusted the virtual
screen sizes. On failure report the failing driver and reject the screen
size change.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
|
|
Fix small typo which causes the mask for the 'precharge1' setting
to be used with the 'precharge2' value.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220706184133.210888-1-ezequiel@vanguardiasur.com.ar
|
|
We need to prevent that users configure a screen size which is smaller than the
currently selected font size. Otherwise rendering chars on the screen will
access memory outside the graphics memory region.
This patch adds a new function fbcon_modechange_possible() which
implements this check and which later may be extended with other checks
if necessary. The new function is called from the FBIOPUT_VSCREENINFO
ioctl handler in fbmem.c, which will return -EINVAL if userspace asked
for a too small screen size.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
|
|
Prevent that users set a font size which is bigger than the physical screen.
It's unlikely this may happen (because screens are usually much larger than the
fonts and each font char is limited to 32x32 pixels), but it may happen on
smaller screens/LCD displays.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v4.14+
|
|
Now that the irq_data_update_affinity helper exists, enforce its use
by returning a a const cpumask from irq_data_get_affinity_mask.
Since the previous commit already updated places that needed to call
irq_data_update_affinity, this commit updates the remaining code that
either did not modify the cpumask or immediately passed the modified
mask to irq_set_affinity.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-8-samuel@sholland.org
|
|
Some architectures and irqchip drivers modify the cpumask returned by
irq_data_get_affinity_mask, usually by copying in to it. This is
problematic for uniprocessor configurations, where the affinity mask
should be constant, as it is known at compile time.
Add and use a setter for the affinity mask, following the pattern of
irq_data_update_effective_affinity. This allows the getter function to
return a const cpumask pointer.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Xen bits
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-7-samuel@sholland.org
|
|
An IRQ's effective affinity can only be different from its configured
affinity if there are multiple CPUs. Make it clear that this option is
only meaningful when SMP is enabled. Most of the relevant code in
irqdesc.c is already hidden behind CONFIG_SMP anyway.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-4-samuel@sholland.org
|
|
The generic IPI code depends on the IRQ affinity mask being allocated
and initialized. This will not be the case if SMP is disabled. Fix up
the remaining driver that selected GENERIC_IRQ_IPI in a non-SMP config.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-3-samuel@sholland.org
|
|
The MIPS GIC irqchip driver may be selected in a uniprocessor
configuration, but it unconditionally registers an IPI domain.
Limit the part of the driver dealing with IPIs to only be compiled when
GENERIC_IRQ_IPI is enabled, which corresponds to an SMP configuration.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-2-samuel@sholland.org
|
|
Need get the new fence when we replace the old one.
Fixes: 047a1b877ed48 ("dma-buf & drm/amdgpu: remove dma_resv workaround")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220707080241.20060-1-xinhui.pan@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
VP8 codec is deprecated for sc7280 SOC. Fix in platform layer to
update the supported codecs accordingly.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Fritz Koenig<frkoenig@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Here we introduce a new fault injection for SSR trigger.
To trigger the SSR:
echo 100 > /sys/kernel/debug/venus/fail_ssr/probability
echo 1 > /sys/kernel/debug/venus/fail_ssr/times
Co-developed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Since we are not holding a wakeref, shrinking a bound object is not
guaranteed.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6370
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220706154738.235204-1-matthew.auld@intel.com
|
|
Having removed the event trigger type from struct stm32_desc_irq
makes worthless keep using a struct.
Replace the struct by a single dimension array and use 8 bit type
to reduce the overal memory footprint.
On armv7a this patch reduces by 7% the size of the driver, from
text data bss dec hex filename
6977 424 4 7405 1ced irq-stm32-exti.o
to
6449 424 4 6877 1add irq-stm32-exti.o
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220606162757.415354-7-antonio.borneo@foss.st.com
|
|
The flag reporting whether an event is 'direct' or 'configurable'
is available in the read-only registers EVENT_TRG.
Drop this redundant information from the struct stm32_desc_irq and
use the proper bit from EVENT_TRG register.
On armv7a this patch reduces by 3% the size of the driver, from
text data bss dec hex filename
7233 424 4 7661 1ded irq-stm32-exti.o
to
6977 424 4 7405 1ced irq-stm32-exti.o
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220606162757.415354-6-antonio.borneo@foss.st.com
|
|
The reference manual RM0436 of stm32mp15 till version v4.0 was
erroneously reporting the Event Mask Registers (EMR) for the
Cortex-A CPUs.
These registers have been removed from v5.0 of the manual and the
corresponding offsets have been marked as 'Reserved'.
Prevent accessing these reserved addresses by tagging the EMR
offsets as UNDEF_REG and modifying the code to handle this case.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220606162757.415354-5-antonio.borneo@foss.st.com
|
|
The value hwirq is received from DT. If it exceeds the maximum
valid value it causes the code to address unexisting irq chips
reading outside the array boundary.
Check the value of hwirq before using it.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220606162757.415354-4-antonio.borneo@foss.st.com
|
|
The driver has to mask/unmask the corresponding flag in the
Interrupt Mask Register (IMR).
This is already done for configurable event, while direct events
only forward the mask/unmask request to the parent.
Use the existing stm32_exti_h_mask()/stm32_exti_h_unmask() for
direct events too.
Signed-off-by: Loic Pallardy <loic.pallardy@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220606162757.415354-3-antonio.borneo@foss.st.com
|
|
When there is no parent, there is no specific action to do in
stm32-exti irqchip. In such case, it's incorrect returning an
error.
Let irq_set_affinity to return IRQ_SET_MASK_OK_DONE when there is
no parent.
Signed-off-by: Ludovic Barre <ludovic.barre@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220606162757.415354-2-antonio.borneo@foss.st.com
|
|
Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA. So add
the quirk IO_PGTABLE_QUIRK_ARM_MTK_TTBR_EXT to let level 1 and level 2
pgtable support at most 35bit PA.
Signed-off-by: Ning Li <ning.li@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220630092927.24925-3-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA and
cause pgtable PA size larger than 32bit.
Since Mediatek IOMMU hardware support at most 35bit PA in pgtable,
so add a quirk to allow the PA of pgtables support up to bit35.
Signed-off-by: Ning Li <ning.li@mediatek.com>
Signed-off-by: Yunfei Wang <yf.wang@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220630092927.24925-2-yf.wang@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Rename 'device_id' as 'sbdf' and extend it to 32bit so that we can
pass PCI segment ID to ppr_notifier(). Also pass PCI segment ID to
pci_get_domain_bus_and_slot() instead of default value.
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-36-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Rename struct device_state.devid variable to struct device_state.sbdf
and extend it to 32-bit to include the 16-bit PCI segment ID via
the helper function get_pci_sbdf_id().
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-35-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Print pci segment ID along with bdf. Useful for debugging.
Co-developed-by: Suravee Suthikulpaint <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpaint <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-34-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
By default, PCI segment is zero and can be omitted. To support system
with non-zero PCI segment ID, modify the parsing functions to allow
PCI segment ID.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-33-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Upcoming AMD systems can have multiple PCI segments. Hence pass PCI
segment ID to pci_get_domain_bus_and_slot() instead of '0'.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-32-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Extend current device ID variables to 32-bit to include the 16-bit
segment ID when parsing device information from IVRS table to initialize
each IOMMU.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-31-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Current get_device_id() only provide 16-bit PCI device ID (i.e. BDF).
With multiple PCI segment support, we need to extend the helper function
to include PCI segment ID.
So, introduce a new helper function get_device_sbdf_id() to replace
the current get_pci_device_id().
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-30-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Fix amd_iommu_flush_dte_all() and amd_iommu_flush_tlb_all() to flush
upto last_bdf only.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-29-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Replace them with per PCI segment device table.
Also remove dev_table_size, alias_table_size, amd_iommu_last_bdf
variables.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-28-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
To include a pointer to per PCI segment device table.
Also include struct amd_iommu as one of the function parameter to
amd_iommu_apply_erratum_63() since it is needed when setting up DTE.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-27-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Include struct amd_iommu_pci_seg as a function parameter since
we need to access per PCI segment device table.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-26-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Start using per PCI segment device table instead of global
device table.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-25-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Start using per PCI segment device table instead of global
device table.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-24-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Start using per PCI segment device table instead of global
device table.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-23-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Start using per PCI segment data structures instead of global data
structures.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-22-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Then, remove the global amd_iommu_rlookup_table and rlookup_table_size.
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-21-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Pass amd_iommu structure as one of the parameter to these functions
as its needed to retrieve variable tables inside these functions.
Co-developed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-20-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|