| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch adds missing IRQx_A/IRQx_B, and tidies up existing IRQs.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zghtsjb4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This patch adds missing TCLKx_A/TCLKx_B/TCLKx_X.
Because Document (Rev.0.51) has 2x TCLK3/TCLK4 with no suffix (_A, _B),
this patch names them as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qv5txvt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
According to Rev.0.51 datasheet 004_R-CarV4H_pin_function.xlsx,
GP1_23 - GP1_28 are 1.8/3.3V. But they are not on Table 7.28.
According to the HW team, there are no bits assigned.
This patch follows HW team's comment.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735fltxwg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Remove POC2 which is not documented, and remove TD0SEL3 which is not
needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874k01txy9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Current R-Car V4H PFC code has many MOD_SELx definitions with all 0.
But these have no meaning. This patch removes them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875ykhtxym.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Current R-Car V4H PFC code has many IPxSRx definitions with all 0.
But these have no meaning. This patch removes them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877d4xtxyv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Current R-Car V4H PFC code has many NOGP definitions. But these are not
used, and they are different from original usage. This patch removes
them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rpdtxz8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
MODSEL8 controls I2C vs. GPIO modes, and the Datasheet (Rev.0.51) is
indicating that I2C needs 1. But we should use 0 for all cases in
reality. New Datasheet should be updated.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a69ttxzg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This patch adds SCIF, I2C, EthernetAVB, HSCIF, MMC, QSPI, MSIOF, PWM,
CAN-FD, Ethernet-TSN, PCIe pins, groups, and functions.
This patch was created based on the Rev.0.51 datasheet.
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: CongDang <cong.dang.xn@renesas.com>
Signed-off-by: Kazuya Mizuguch <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
[Morimoto: merged above patches into one, cleanup white space, sort modules alphabetically, fixup comments]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bku9ty0b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This patch adds initial pinctrl support for the R-Car V4H (R8A779G0)
SoC, including bias, drive strength and voltage control.
This patch was created based on the Rev.0.51 datasheet.
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Morimoto: merge Kihara-san's MODSEL8 fixup patch, cleanup white space, care about reserved bits on each configs, fixup comments, etc.]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czepty0j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add PORT_GP_CFG_13() and PORT_GP_13() helper macros, to be used by the
r8a779g0 subdriver.
Based on a larger patch in the BSP by LUU HOAI.
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edz5ty0r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add support for pin and gpio controller driver for RZ/V2M SoC.
Based on the RZ/G2L driver.
Note that the DETDO and DETMS dedicated pins are currently not
documented in the HW manual as to which pin group they are in.
HW team has since said that the output level of 1.8V I/O group 4
(for MD0-7, and debugger) is the same as the 1.8V I/O group 3.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220624084833.22605-3-phil.edworthy@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Use lower case hex consistently for define values.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220609120338.4080-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clean up the QMP defines by removing some stray white space and making
sure values are aligned.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220609120338.4080-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clean up the QMP v4 and v5 defines by moving a few entries that were out
of order.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220609120338.4080-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clean up the pipe clock handling by using dev_err_probe() to handle
probe deferral and dropping the obsolete comment that claimed that the
pipe clock was optional for some other PHY types.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220623113314.29761-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop the obsolete pipe clock handling which was used to treat the pipe
clock as optional for types other than PCIe and USB and which is no
longer needed since splitting the PHY driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220623113314.29761-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Drop the obsolete pipe clock handling which was used to treat the pipe
clock as optional for types other than PCIe and USB and which is no
longer needed since splitting the PHY driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220623113314.29761-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This is a new driver that supports the integrated DisplayPort phy for
mediatek SoCs, especially the mt8195. The phy is integrated into the
DisplayPort controller and will be created by the mtk-dp driver. This
driver expects a struct regmap to be able to work on the same registers
as the DisplayPort controller. It sets the device data to be the struct
phy so that the DisplayPort controller can easily work with it.
The driver does not have any devicetree bindings because the datasheet
does not list the controller and the phy as distinct units.
The interaction with the controller can be covered by the configure
callback of the phy framework and its displayport parameters.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
[Bo-Chen: Modify reviewers' comments.]
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220624062725.4095-1-rex-bc.chen@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support new compatible for dphy-tx on j721e
and implement dphy ops required.
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220623125433.18467-4-r-ravikumar@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for band ctrl config for dphy tx.
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220623125433.18467-3-r-ravikumar@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If a phy supply is designated but isn't available at probe time, an
EPROBE_DEFER is returned. Use dev_err_probe to prevent this from
incorrectly printing during boot.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220625212711.558495-1-pgwipeout@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
there is an unexpected word "the" in the comments that need to be dropped
file: ./drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
line: 139
* when in RxULPS check state, after the the logic enable the analog,
changed to
* when in RxULPS check state, after the logic enable the analog,
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220621120015.113682-1-jiangjian@cdjrlc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Synopsys DesignWare core based PCIe controllers in Tegra234 SoC
interface with Universal PHY (UPHY) module through a PIPE2UPHY (P2U)
module. For each PCIe lane of a controller, there is a P2U unit
instantiated at hardware level. This driver provides support for the
programming required for each P2U that is going to be used for a PCIe
controller.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://lore.kernel.org/r/20220629060435.25297-9-vidyas@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add PCIe GEN3 PHY driver support on MediaTek chipsets.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioachino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220617070246.20142-3-jianjun.wang@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
On some platforms, like Intel Merrifield, the writing values during power on
may timeout:
tusb1210 dwc3.0.auto.ulpi: error -110 writing val 0x41 to reg 0x80
phy phy-dwc3.0.auto.ulpi.0: phy poweron failed --> -110
dwc3 dwc3.0.auto: error -ETIMEDOUT: failed to initialize core
dwc3: probe of dwc3.0.auto failed with error -110
which effectively fails the probe of the USB controller.
Drop the check as it was before the culprit commit (see Fixes tag).
Fixes: 09a3512681b3 ("phy: ti: tusb1210: Improve ulpi_read()/_write() error checking")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Link: https://lore.kernel.org/r/20220613160848.82746-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Marc Kleine-Budde says:
====================
can 2022-07-04
The 1st patch is by Oliver Hartkopp, targets the BCM CAN protocol and
converts a costly synchronize_rcu() to call_rcu() to fix a performance
regression.
Srinivas Neeli's patch for the xilinx_can driver drops the brp limit
down to 1, as only the pre-production silicon have an issue with a brp
of 1.
The next patch is by Duy Nguyen and fixes the data transmission on
R-Car V3U SoCs in the rcar_canfd driver.
Rhett Aultman's patch fixes a DMA memory leak in the gs_usb driver.
Liang He's patch removes an extra of_node_get() in the grcan driver.
The next 2 patches are by me, target the m_can driver and fix the
timestamp handling used for peripheral devices like the tcan4x5x.
Jimmy Assarsson contributes 3 patches for the kvaser_usb driver and
fixes CAN clock and bit timing related issues.
The remaining 5 patches target the mcp251xfd driver. Thomas Kopp
contributes 2 patches to improve the workaround for broken CRC when
reading the TBC register. 3 patches by me add a missing
hrtimer_cancel() during the ndo_stop() callback, and fix the reading
of the Device ID register.
* tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion
can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id
can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel()
can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register
can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd
can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits
can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression
can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info
can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits
can: m_can: m_can_chip_config(): actually enable internal timestamping
can: grcan: grcan_probe(): remove extra of_node_get()
can: gs_usb: gs_usb_open/close(): fix memory leak
can: rcar_canfd: Fix data transmission failed on R-Car V3U
Revert "can: xilinx_can: Limit CANFD brp to 2"
can: bcm: use call_rcu() instead of costly synchronize_rcu()
====================
Link: https://lore.kernel.org/r/20220704122613.1551119-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Changes in this merge:
Core:
- client utilization via fdinfo support
- fix fence rollover issue
DPU:
- constification of HW catalog
- support for using encoder as CRC source
- WB support on sc7180
- WB resolution fixes
- enable DSPP support for sc7280
DP:
- dropped custom bulk clock implementation
- made dp_bridge_mode_valid() return MODE_CLOCK_HIGH where applicable
- fix link retraining on resolution change
MDP5:
- MSM8953 perf data
HDMI:
- YAML'ification of schema
- dropped obsolete GPIO support
- misc cleanups
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
And while we are at it, let's start the fence counter close to the
rollover point so that if issues slip in, they are more obvious.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: fde5de6cb461 ("drm/msm: move fence code to it's own file")
Fixes: 5f3aee4ceb5b ("drm/msm: Handle fence rollover")
Patchwork: https://patchwork.freedesktop.org/patch/489619/
Link: https://lore.kernel.org/r/20220615162435.3011793-1-robdclark@gmail.com
[DB: fixed the conflict while applying the patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Fix following coccicheck warning:
drivers/gpu/drm/msm/msm_gpu_devfreq.c:72:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead.
Use div64_ul instead of do_div to avoid a possible truncation.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Patchwork: https://patchwork.freedesktop.org/patch/483499/
Link: https://lore.kernel.org/r/20220426132126.686447-1-wanjiabing@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Similar to AMD commit
874442541133 ("drm/amdgpu: Add show_fdinfo() interface"), using the
infrastructure added in previous patches, we add basic client info
and GPU engine utilisation for msm.
Example output:
# cat /proc/`pgrep glmark2`/fdinfo/6
pos: 0
flags: 02400002
mnt_id: 21
ino: 162
drm-driver: msm
drm-client-id: 7
drm-engine-gpu: 1734371319 ns
drm-cycles-gpu: 1153645024
drm-maxfreq-gpu: 800000000 Hz
See also: https://patchwork.freedesktop.org/patch/468505/
v2: Add dev-maxfreq-$engine and update drm-usage-stats.rst
v3: spelling and compiler warning
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Patchwork: https://patchwork.freedesktop.org/patch/488906/
Link: https://lore.kernel.org/r/20220609174213.2265938-2-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Misc small cleanup I noticed. Not called from another object file since
commit 3c9edd9c85f5 ("drm/msm: Introduce GEM object funcs")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489362/
Link: https://lore.kernel.org/r/20220613204910.2651747-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Currently gcc-msm8960 driver manually creates tsens platform device
manually. It would be better to follow IPQ8064 approach, where tsens
device is defined as gcc's child device in the device tree. If nothing
else, it removes gcc's dependency on QFPROM, thus allowing clock
controller to be probed earlier.
Don't create it in case there are available child nodes (tsens) inside
the gcc's device tree node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521151437.1489111-4-dmitry.baryshkov@linaro.org
|
|
of_iomap() may return NULL, so we need check the return value.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In case of error, of_iomap() returns NULL pointer not ERR_PTR().
The IS_ERR() test in the return value check should be replaced
with NULL test and return -ENOMEM as error value.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The PRCM MFD driver is already selected by the two platforms where it is
actually used (MACH_SUN6I and MACH_SUN8I). Selecting it here builds it
unnecessarily on the rest of the Allwinner platforms.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702190135.51744-2-samuel@sholland.org
|
|
The sunxi legacy clocks were never compatible with any 64-bit SoC,
so there is no point in building them as part of a 64-bit ARM kernel.
They make even less sense being built in to a 64-bit RISC-V kernel.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702190135.51744-1-samuel@sholland.org
|
|
The next call to sii8620_burst_get_tx_buf will result in off-by-one
When ctx->burst.tx_count + size == ARRAY_SIZE(ctx->burst.tx_buf). The same
thing happens in sii8620_burst_get_rx_buf.
This patch also change tx_count and tx_buf to rx_count and rx_buf in
sii8620_burst_get_rx_buf. It is unreasonable to check tx_buf's size and
use rx_buf.
Fixes: e19e9c692f81 ("drm/bridge/sii8620: add support for burst eMSC transmissions")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518065856.18936-1-hbh25y@gmail.com
|
|
Add destination side post processing hw block support in sc7280.
This hwblock enablement is necessary to support color features
like CT Matix (Ex: Night Light feature)
Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490382/
Link: https://lore.kernel.org/r/1655802387-15275-1-git-send-email-quic_kalyant@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add the perf data for the mdp found in msm8953.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489153/
Link: https://lore.kernel.org/r/20220610225304.267508-1-luca@z3ntu.xyz
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Struct mdp4_platform_config is a relict from the DT-conversion time.
Move the max_clk field to the mdp4_kms_init(), the place where it is
used and drop the struct mdp4_platform_config and the mdp4_get_config()
function.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/485050/
Link: https://lore.kernel.org/r/20220505135008.1351533-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Move iommu_domain_alloc() in front of adress space/IOMMU initialization.
This allows us to drop it from struct mdp4_cfg_platform which
remained from the pre-DT days.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/485049/
Link: https://lore.kernel.org/r/20220505135008.1351533-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
There might be a chain of bridges attached to the HDMI node
(including but not limited to the display-connector bridge). Add support
for attaching them right to the HDMI bridge chain.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489709/
Link: https://lore.kernel.org/r/20220616085057.432353-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Drop empty callbacks msm_hdmi_bridge_enable() and
msm_hdmi_bridge_disable().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489707/
Link: https://lore.kernel.org/r/20220616085054.432317-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Declare that 8x60 HDMI PHY uses the core-vdda regulator and slave_iface
clock (this is the same config as is used by the 8960).
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488863/
Link: https://lore.kernel.org/r/20220609122350.3157529-13-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
MSM8660 requires the same set of clocks and regulators as MSM8960. Reuse
MSM8960's config for the MSM8660 (8x60).
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488864/
Link: https://lore.kernel.org/r/20220609122350.3157529-12-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Since there is no more difference between the HDMI platform data
between MSM8974/APQ8084/MSM8994/MSM8996, merge these configs into a
single entry.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488868/
Link: https://lore.kernel.org/r/20220609122350.3157529-11-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply
regulators that are to be enabled for HPD to work. Currently these
regulators contain the hpd_gdsc, which was replaced by the power-domains
support and hpd-5v/hpd-5v-en, which are not used by the chip itself.
They power up the ESD bridge.
However it is a separate device which should be represented separately
in the device tree.
None of upstreamed devices support these properties. Thus drop support
for them from the HDMI driver.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488860/
Link: https://lore.kernel.org/r/20220609122350.3157529-10-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Several platform configs use empty 'none' regulator arrays. They are not
necessary, as the code will use corresponding _cnt field and skip the
array completely. Drop them now.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488861/
Link: https://lore.kernel.org/r/20220609122350.3157529-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
DB820c makes use of core-vcc-supply and core-vdda-supply, however the
driver code doesn't support these regulators. Enable them for HDMI on
8996 platform.
Fixes: 0afbe59edd3f ("drm/msm/hdmi: Add basic HDMI support for msm8996")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488857/
Link: https://lore.kernel.org/r/20220609122350.3157529-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
Kuninori Morimoto
Phong Hoang
LUU HOAI
Phil Edworthy
Johan Hovold
Markus Schneider-Pargmann
Rahul T R
Peter Geis
Jiang Jian
Vidya Sagar
Jianjun Wang
Andy Shevchenko
Jakub Kicinski
Dmitry Baryshkov
Rob Clark
Wan Jiabing
Yang Yingliang
Samuel Holland
Hangyu Hua
Kalyan Thota
Vladimir Lypak