| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In a future change we will need to remember the entire tc-taprio config
on all ports rather than just the base time, so use the
taprio_offload_get() helper function to replace ocelot_port->base_time
with ocelot_port->taprio.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UAPI Changes:
- Expose per tile media freq factor in sysfs (Ashutosh Dixit, Dale B Stimson)
- Document memory residency and Flat-CCS capability of obj (Ramalingam C)
- Disable GETPARAM lookups of I915_PARAM_[SUB]SLICE_MASK on Xe_HP+ (Matt Roper)
Cross-subsystem Changes:
- Rename intel-gtt symbols (Lucas De Marchi)
Core Changes:
Driver Changes:
- Support programming the EU priority in the GuC descriptor (DG2) (Matthew Brost)
- DG2 HuC loading support (Daniele Ceraolo Spurio)
- Fix build error without CONFIG_PM (YueHaibing)
- Enable THP on Icelake and beyond (Tvrtko Ursulin)
- Only setup private tmpfs mount when needed and fix logging (Tvrtko Ursulin)
- Make __guc_reset_context aware of guilty engines (Umesh Nerlige Ramappa)
- DG2 small bar memory probing fixes (Nirmoy Das)
- Remove unnecessary GuC err capture noise (Alan Previn)
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms (Maarten Lankhorst)
- Fix undefined behavior in GuC backend due to shift overflowing the constant (Borislav Petkov)
- New DG2 workarounds (Swathi Dhanavanthri, Anshuman Gupta)
- Report no hwconfig support on ADL-N (Balasubramani Vivekanandan)
- Fix error_state_read ptr + offset use (Alan Previn)
- Expose per tile media freq factor in sysfs (Ashutosh Dixit, Dale B Stimson)
- Fix memory leaks in per-gt sysfs (Ashutosh Dixit)
- Fix dma_resv fence handling in multi-batch execbuf (Nirmoy Das)
- Add extra registers to GPU error dump on Gen11+ (Stuart Summers)
- More PVC+DG2 workarounds (Matt Roper)
- Improve user experience and driver robustness under SIGINT or similar (Tvrtko Ursulin)
- Don't show engine classes not present (Tvrtko Ursulin)
- Improve on suspend / resume time with VT-d enabled (Thomas Hellström)
- Add missing else (katrinzhou)
- Don't leak lmem mapping in vma_evict (Juha-Pekka Heikkila)
- Add smem fallback allocation for dpt (Juha-Pekka Heikkila)
- Tweak the ordering in cpu_write_needs_clflush (Matthew Auld)
- Do not access rq->engine without a reference (Niranjana Vishwanathapura)
- Revert "drm/i915: Hold reference to intel_context over life of i915_request" (Niranjana Vishwanathapura)
- Don't update engine busyness stats too frequently (Alan Previn)
- Add additional steps for Wa_22011802037 for execlist backend (Umesh Nerlige Ramappa)
- Fix a lockdep warning at error capture (Nirmoy Das)
- Ponte Vecchio prep work and new blitter engines (Matt Roper, John Harrison, Lucas De Marchi)
- Read correct RP_STATE_CAP register (PVC) (Matt Roper)
- Define MOCS table for PVC (Ayaz A Siddiqui)
- Driver refactor and support Ponte Vecchio forcewake handling (Matt Roper)
- Remove additional 3D flags from PIPE_CONTROL (Ponte Vecchio) (Stuart Summers)
- XEHPSDV and PVC do not use HuC (Daniele Ceraolo Spurio)
- Extract stepping information from PCI revid (Ponte Vecchio) (Matt Roper)
- Add initial PVC workarounds (Stuart Summers)
- SSEU handling driver refactor and Ponte Vecchio support (Matt Roper)
- GuC depriv applies to PVC (Matt Roper)
- Add register steering (Ponte Vecchio) (Matt Roper)
- Add recommended MMIO setting (Ponte Vecchio) (Matt Roper)
- Move multicast register handling to a dedicated file (Matt Roper)
- Cleanup interface for MCR operations (Matt Roper)
- Extend i915_vma_pin_iomap() (CQ Tang)
- Re-do the intel-gtt split (Lucas De Marchi)
- Correct duplicated/misplaced GT register definitions (Matt Roper)
- Prefer "XEHP_" prefix for registers (Matt Roper)
- Don't use DRM_DEBUG_WARN_ON for unexpected l3bank/mslice config (Tvrtko Ursulin)
- Don't use DRM_DEBUG_WARN_ON for ring unexpectedly not idle (Tvrtko Ursulin)
- Make drop_pages() return bool (Lucas De Marchi)
- Fix CFI violation with show_dynamic_id() (Nathan Chancellor)
- Use i915_probe_error instead of drm_error in GuC code (Vinay Belgaumkar)
- Fix use of static in macro mismatch (Andi Shyti)
- Update tiled blits selftest (Bommu Krishnaiah)
- Future-proof platform checks (Matt Roper)
- Only include what's needed (Jani Nikula)
- remove accidental static from a local variable (Jani Nikula)
- Add global forcewake request to drpc (Vinay Belgaumkar)
- Fix spelling typo in comment (pengfuyuan)
- Increase timeout for live_parallel_switch selftest (Akeem G Abodunrin)
- Use non-blocking H2G for waitboost (Vinay Belgaumkar)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YrwtLM081SQUG1Dc@tursulin-desk
|
|
These are required by certain network profiling applications in order to
measure delays.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220629181335.3800821-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_parse_phandle() will increase the refcount of 'pcs_node', so add
of_node_put() before return from a5psw_pcs_get().
Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220630014153.1888811-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
msm8916 has (at least) 6 "General Purpose" clocks that can be muxed to
SoC pins. These clocks are:
GP_CLK{0, 1} : GPIO_{31, 32} (Belongs to CAMSS according to Linux)
GP_CLK_{1-3}{A, B} : GPIO_{49-51, 97, 12, 13} (Belongs to GCC itself)
GP_MN : GPIO_110 (Doesn't seem to be described in gcc,
ignored in this patch)
Those clocks may be used as e.g. PWM sources for external peripherals.
Add more frequencies to the table for those clocks so it's possible
for arbitrary peripherals to make use of them.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-5-nikita@trvn.ru
|
|
Sometimes calculation of d value may result in 0 because of the
rounding after integer division. This causes the following error:
[ 113.969689] camss_gp1_clk_src: rcg didn't update its configuration.
[ 113.969754] WARNING: CPU: 3 PID: 35 at drivers/clk/qcom/clk-rcg2.c:122 update_config+0xc8/0xdc
Make sure that D value is never zero.
Fixes: 7f891faf596e ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-3-nikita@trvn.ru
|
|
In cases when MND is not enabled (e.g. when only Half Integer Divider is
used), setting D registers makes no effect.
Fail instead of making ineffective write.
Fixes: 7f891faf596e ("clk: qcom: clk-rcg2: Add support for duty-cycle for RCG")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220612145955.385787-2-nikita@trvn.ru
|
|
Delete the redundant word 'new'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220629131330.16812-1-yuanjilin@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Delete the redundant word 'a'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220629130013.3273-1-yuanjilin@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Delete the redundant word 'a'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220629125441.62420-1-yuanjilin@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
When breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the child node.
Add missing of_node_put() to avoid refcount leak.
Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606064252.42595-1-linmq006@gmail.com
|
|
Delete the redundant word 'the'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220629123756.48860-1-yuanjilin@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Delete the redundant word 'slot'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220629092856.35678-1-yuanjilin@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Delete the redundant word 'and'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220604142327.14714-1-wangxiang@cdjrlc.com
|
|
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2022-06-30
This series contains updates to misc Intel drivers.
Jesse removes unused macros from e100, e1000, e1000e, i40e, iavf, igc,
ixgb, ixgbe, and ixgbevf drivers.
Jiang Jian removes repeated words from ixgbe, fm10k, igb, and ixgbe
drivers.
Jilin Yuan removes repeated words from e1000, e1000e, fm10k, i40e, iavf,
igb, igbvf, igc, ixgbevf, and ice drivers.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
intel/ice:fix repeated words in comments
intel/ixgbevf:fix repeated words in comments
intel/igc:fix repeated words in comments
intel/igbvf:fix repeated words in comments
intel/igb:fix repeated words in comments
intel/iavf:fix repeated words in comments
intel/i40e:fix repeated words in comments
intel/fm10k:fix repeated words in comments
intel/e1000e:fix repeated words in comments
intel/e1000:fix repeated words in comments
ixgbe: drop unexpected word 'for' in comments
igb: remove unexpected word "the"
fm10k: remove unexpected word "the"
ixgbe: remove unexpected word "the"
intel: remove unused macros
====================
Link: https://lore.kernel.org/r/20220630213208.3034968-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kbuild spotted the following bug during the testing of one of
the optimizations:
In file included from include/linux/cpumask.h:12,
[...]
from drivers/net/ethernet/intel/ice/ice_switch.c:4:
drivers/net/ethernet/intel/ice/ice_switch.c: In function 'ice_find_free_recp_res_idx.constprop':
include/linux/bitmap.h:447:22: warning: 'possible_idx[0]' is used uninitialized [-Wuninitialized]
447 | *map |= GENMASK(start + nbits - 1, start);
| ^~
In file included from drivers/net/ethernet/intel/ice/ice.h:7,
from drivers/net/ethernet/intel/ice/ice_lib.h:7,
from drivers/net/ethernet/intel/ice/ice_switch.c:4:
drivers/net/ethernet/intel/ice/ice_switch.c:4929:24: note: 'possible_idx[0]' was declared here
4929 | DECLARE_BITMAP(possible_idx, ICE_MAX_FV_WORDS);
| ^~~~~~~~~~~~
include/linux/types.h:11:23: note: in definition of macro 'DECLARE_BITMAP'
11 | unsigned long name[BITS_TO_LONGS(bits)]
| ^~~~
%ICE_MAX_FV_WORDS is 48, so bitmap_set() here was initializing only
48 bits, leaving a junk in the rest 16.
It was previously hidden due to that filling 48 bits makes
bitmap_set() call external __bitmap_set(), but after making it use
plain bit arithmetics on small bitmaps, compilers started seeing
the issue. It was still working because those 16 weren't used
anywhere anyhow.
bitmap_{clear,set}() are not really intended to initialize bitmaps,
rather to modify already initialized ones, as they don't do anything
past the passed number of bits. The correct function to do this in
that particular case is bitmap_fill(), so use it here. It will do
`*possible_idx = ~0UL` instead of `*possible_idx |= GENMASK(47, 0)`,
not leaving anything in an undefined state.
Fixes: fd2a6b71e300 ("ice: create advanced switch recipe")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
of_node_put() will check NULL pointer.
Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220602042430.1114-1-linmq006@gmail.com
|
|
Pull drm fixes from Dave Airlie:
"Bit quieter this week, the main thing is it pulls in the fixes for the
sysfb resource issue you were seeing. these had been queued for next
so should have had some decent testing.
Otherwise amdgpu, i915 and msm each have a few fixes, and vc4 has one.
fbdev:
- sysfb fixes/conflicting fb fixes
amdgpu:
- GPU recovery fix
- Fix integer type usage in fourcc header for AMD modifiers
- KFD TLB flush fix for gfx9 APUs
- Display fix
i915:
- Fix ioctl argument error return
- Fix d3cold disable to allow PCI upstream bridge D3 transition
- Fix setting cache_dirty for dma-buf objects on discrete
msm:
- Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so
that userspace sees the value *after* it is incremented if waiting
for vblank events
- Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash
in probe/bind error paths
- Fix to resolve the smatch error of de-referencing before NULL check
in dpu_encoder_phys_wb.c
- Fix error return to userspace if fence-id allocation fails in
submit ioctl
vc4:
- NULL ptr dereference fix"
* tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/amdgpu/display: set vblank_disable_immediate for DC"
drm/amdgpu: To flush tlb for MMHUB of RAVEN series
drm/fourcc: fix integer type usage in uapi header
drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()
fbdev: Disable sysfb device registration when removing conflicting FBs
firmware: sysfb: Add sysfb_disable() helper function
firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer
drm/msm/gem: Fix error return on fence id alloc fail
drm/i915: tweak the ordering in cpu_write_needs_clflush
drm/i915/dgfx: Disable d3cold at gfx root port
drm/i915/gem: add missing else
drm/vc4: perfmon: Fix variable dereferenced before check
drm/msm/dpu: Fix variable dereferenced before check
drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()
drm/msm/dpu: Increment vsync_cnt before waking up userspace
|
|
drm-misc-next for v5.20:
UAPI Changes:
* fourcc: Update documentation
Cross-subsystem Changes:
* iosys-map: Rework iosys_map_{rd,wr} for improved performance
* vfio: Use aperture helpers
Core Changes:
* aperture: Export for use with other subsystems
* connector: Remove deprecated ida_simple_get()
* crtc: Add helper with general state checks, convert drivers
* format-helper: Add Kunit tests for RGB32 to RGB8
Driver Changes:
* ast: Fix black screen on resume
* bridge: tc358767: Simplify DSI lane handling
* mcde: Fix ref-count leak
* mxsfb/lcdif: Support i.MX8MP LCD controller
* stm/ltdc: Support dynamic Z order; Support mirroring; Fixes and cleanups
* vc4: Many small fixes throughout the driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmK9TnYACgkQaA3BHVML
# eiMJcgf+JsGWlFutkxlJCEUDKTXk6BYHQL4czyskDvpBoLrdU1tyrAfKKtqP5k+0
# SMvS6h1CFa/fSUCYpbdpJ6ER1fZ9r19WdgoPTBc4b97/uQTOJDzd5zuHDiJZquwC
# O6HD/rptUzPFe6HJuY2cYVtwMlWb2NhITMHfctgyeQJSMK8TwoU1bDVFftwxaWFt
# ISscTz0enn38sCjEarSpyKkBCinuaWDcpe5BI2Dp3imkDWR3ktzuh4B11QWS0DKs
# Q/FLGTEl1sDrV7r93WiA5BIAPVwNMm1Pl0syd1p42SNLNnv0gcap4GL6qni4h9Ev
# P/3fIInor/Sht8fyhlFsOUA8k2x7MA==
# =6NoJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Jun 2022 17:19:18 AEST
# gpg: using RSA key 7217FBAC8CE9CF6344A168E5680DC11D530B7A23
# gpg: Can't check signature: No public key
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Yr1On+eT1mCvIMzW@linux-uq9g
|
|
rxe_queue.h currently includes <uapi/rdma/rdma_user_rxe.h> for a
definition of struct rxe_queue_buf. But it is only used as a pointer so
the definition is not needed.
This patch replaces the include statement with the declaration
struct rxe_queue_buf;
Link: https://lore.kernel.org/r/20220630190425.2251-5-rpearsonhpe@gmail.com
Reported-by: Frank Zago <frank.zago@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The pyverbs test suite generates a few dmesg traces from intentional error
tests. This patch replaces those messages with pr_debug() calls which
improves the usefullness of the tests.
Link: https://lore.kernel.org/r/20220630190425.2251-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Properly handle FP code in dcn32_clk_mgr.c.
Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When we tried to compile DCN32/321 for 32-bit architecture, we got this
error message:
ERROR: modpost: "__nedf2" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This commit fixes this issue by rewriting a small part of the
dcn32_build_wm_range_table.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Sometimes when trying to enable some feature, we have to define some
values with educated guesses, but we mark those values as TBD, which
means "To Be Determined". However, the correct way to approach it is by
loading that information from the firmware. Anyway, some of the values
that we were experimenting with caused this issue:
ERROR: modpost: "__muldf3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This commit fixes this issue by removing the division by two since it is
harmless in this case.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When we tried to compile DCN32/321 for 32-bit architecture, we got this
error message:
ERROR: modpost: "__floatunsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This was caused because we were trying to assign an unsigned int to a
double value which causes issues for 32-bit architecture. This issue can
be fixed by changing the value type.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On SM8250 two found VFE GDSC power domains shall not be operated, if
titan top is turned off, thus the former power domains will be set as
subdomains by a GDSC registration routine.
Fixes: 5d66ca79b58c ("clk: qcom: Add camera clock controller driver for SM8250")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519214133.1728979-3-vladimir.zapolskiy@linaro.org
|
|
On SDM845 two found VFE GDSC power domains shall not be operated, if
titan top is turned off, thus the former power domains will be set as
subdomains by a GDSC registration routine.
Fixes: 78412c262004 ("clk: qcom: Add camera clock controller driver for SDM845")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519214133.1728979-2-vladimir.zapolskiy@linaro.org
|
|
While we tried to build amdgpu on i386, we got this error:
ERROR: modpost: "__umoddi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
This commit fixes this issue by replacing the standard module operator
with div_u64_rem.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Fixes: d3dfceb58de5 ("drm/amd/display: Add dependant changes for DCN32/321")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c
9c5de246c1db ("net: sparx5: mdb add/del handle non-sparx5 devices")
fbb89d02e33a ("net: sparx5: Allow mdb entries to both CPU and ports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A NULL pointer dereference fix for vc4, and 3 patches to improve the
sysfb device behaviour when removing conflicting framebuffers
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630072404.2fa4z3nk5h5q34ci@houat
|
|
Once the usb sleep clocks are disabled, clock framework is trying to
disable the sleep clock source also.
However, it seems that it cannot be disabled and trying to do so produces:
[ 245.436390] ------------[ cut here ]------------
[ 245.441233] gcc_sleep_clk_src status stuck at 'on'
[ 245.441254] WARNING: CPU: 2 PID: 223 at clk_branch_wait+0x130/0x140
[ 245.450435] Modules linked in: xhci_plat_hcd xhci_hcd dwc3 dwc3_qcom leds_gpio
[ 245.456601] CPU: 2 PID: 223 Comm: sh Not tainted 5.18.0-rc4 #215
[ 245.463889] Hardware name: Xiaomi AX9000 (DT)
[ 245.470050] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 245.474307] pc : clk_branch_wait+0x130/0x140
[ 245.481073] lr : clk_branch_wait+0x130/0x140
[ 245.485588] sp : ffffffc009f2bad0
[ 245.489838] x29: ffffffc009f2bad0 x28: ffffff8003e6c800 x27: 0000000000000000
[ 245.493057] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800226ef20
[ 245.500175] x23: ffffffc0089ff550 x22: 0000000000000000 x21: ffffffc008476ad0
[ 245.507294] x20: 0000000000000000 x19: ffffffc00965ac70 x18: fffffffffffc51a7
[ 245.514413] x17: 68702e3030303837 x16: 3a6d726f6674616c x15: ffffffc089f2b777
[ 245.521531] x14: ffffffc0095c9d18 x13: 0000000000000129 x12: 0000000000000129
[ 245.528649] x11: 00000000ffffffea x10: ffffffc009621d18 x9 : 0000000000000001
[ 245.535767] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001
[ 245.542885] x5 : ffffff803fdca6d8 x4 : 0000000000000000 x3 : 0000000000000027
[ 245.550002] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026
[ 245.557122] Call trace:
[ 245.564229] clk_branch_wait+0x130/0x140
[ 245.566490] clk_branch2_disable+0x2c/0x40
[ 245.570656] clk_core_disable+0x60/0xb0
[ 245.574561] clk_core_disable+0x68/0xb0
[ 245.578293] clk_disable+0x30/0x50
[ 245.582113] dwc3_qcom_remove+0x60/0xc0 [dwc3_qcom]
[ 245.585588] platform_remove+0x28/0x60
[ 245.590361] device_remove+0x4c/0x80
[ 245.594179] device_release_driver_internal+0x1dc/0x230
[ 245.597914] device_driver_detach+0x18/0x30
[ 245.602861] unbind_store+0xec/0x110
[ 245.607027] drv_attr_store+0x24/0x40
[ 245.610847] sysfs_kf_write+0x44/0x60
[ 245.614405] kernfs_fop_write_iter+0x128/0x1c0
[ 245.618052] new_sync_write+0xc0/0x130
[ 245.622391] vfs_write+0x1d4/0x2a0
[ 245.626123] ksys_write+0x58/0xe0
[ 245.629508] __arm64_sys_write+0x1c/0x30
[ 245.632895] invoke_syscall.constprop.0+0x5c/0x110
[ 245.636890] do_el0_svc+0xa0/0x150
[ 245.641488] el0_svc+0x18/0x60
[ 245.644872] el0t_64_sync_handler+0xa4/0x130
[ 245.647914] el0t_64_sync+0x174/0x178
[ 245.652340] ---[ end trace 0000000000000000 ]---
So, add CLK_IS_CRITICAL flag to the clock so that the kernel won't try
to disable the sleep clock.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-10-robimarko@gmail.com
|
|
Add GDSC-s for each of the two USB controllers built-in the IPQ8074.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-9-robimarko@gmail.com
|
|
Currently, attempting to enable the UBI clocks will cause the stuck at
off warning to be printed and clk_enable will fail.
[ 14.936694] gcc_ubi1_ahb_clk status stuck at 'off'
Downstream 5.4 QCA kernel has fixed this by seting the BRANCH_HALT_DELAY
flag on UBI clocks, so lets do the same.
Fixes: 5736294aef83 ("clk: qcom: ipq8074: add NSS clocks")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-6-robimarko@gmail.com
|
|
The built-in PPE engine has a dedicated clock for the EIP-197 crypto
engine.
So, since the required clock currently missing add support for it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-5-robimarko@gmail.com
|
|
NSS port 5 and 6 frequency tables are currently broken and are causing a
wide ranges of issue like 1G not working at all on port 6 or port 5 being
clocked with 312 instead of 125 MHz as UNIPHY1 gets selected.
So, update the frequency tables with the ones from the downstream QCA 5.4
based kernel which has already fixed this.
Fixes: 7117a51ed303 ("clk: qcom: ipq8074: add NSS ethernet port clocks")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-3-robimarko@gmail.com
|
|
UBI32 Huayra PLL fails to lock in 5 us in some SoC silicon and thus it
will cause the wait_for_pll() to timeout and thus return the error
indicating that the PLL failed to lock.
This is bug in Huayra PLL HW for which SW workaround
is to set bit 26 of TEST_CTL register.
This is ported from the QCA 5.4 based downstream kernel.
Fixes: b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-2-robimarko@gmail.com
|
|
Like in IPQ6018 the NSS related Alpha PLL-s require initial configuration
to work.
So, obtain the regmap that is required for the Alpha PLL configuration
and thus utilize the qcom_cc_really_probe() as we already have the regmap.
Then utilize the Alpha PLL configs from the downstream QCA 5.4 based
kernel to configure them.
This fixes the UBI32 and NSS crypto PLL-s failing to get enabled by the
kernel.
Fixes: b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-1-robimarko@gmail.com
|
|
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - new code bugs:
- clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()
- mptcp:
- invoke MP_FAIL response only when needed
- fix shutdown vs fallback race
- consistent map handling on failure
- octeon_ep: use bitwise AND
Previous releases - regressions:
- tipc: move bc link creation back to tipc_node_create, fix NPD
Previous releases - always broken:
- tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
buffered skbs from keeping refcount on the conntrack module
- ipv6: take care of disable_policy when restoring routes
- tun: make sure to always disable and unlink NAPI instances
- phy: don't trigger state machine while in suspend
- netfilter: nf_tables: avoid skb access on nf_stolen
- asix: fix "can't send until first packet is send" issue
- usb: asix: do not force pause frames support
- nxp-nci: don't issue a zero length i2c_master_read()
Misc:
- ncsi: allow use of proper "mellanox" DT vendor prefix
- act_api: add a message for user space if any actions were already
flushed before the error was hit"
* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: dsa: felix: fix race between reading PSFP stats and port stats
selftest: tun: add test for NAPI dismantle
net: tun: avoid disabling NAPI twice
net: sparx5: mdb add/del handle non-sparx5 devices
net: sfp: fix memory leak in sfp_probe()
mlxsw: spectrum_router: Fix rollback in tunnel next hop init
net: rose: fix UAF bugs caused by timer handler
net: usb: ax88179_178a: Fix packet receiving
net: bonding: fix use-after-free after 802.3ad slave unbind
ipv6: fix lockdep splat in in6_dump_addrs()
net: phy: ax88772a: fix lost pause advertisement configuration
net: phy: Don't trigger state machine while in suspend
usbnet: fix memory allocation in helpers
selftests net: fix kselftest net fatal error
NFC: nxp-nci: don't print header length mismatch on i2c error
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
net: tipc: fix possible refcount leak in tipc_sk_create()
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
ipv6/sit: fix ipip6_tunnel_get_prl return value
...
|
|
The only difference between the ADL S and P GuC FWs is the HWConfig
support. ADL-N does not support HWConfig, so we should use the same
binary as ADL-S, otherwise the GuC might attempt to fetch a config
table that does not exist. ADL-N is internally identified as an ADL-P,
so we need to special-case it in the FW selection code.
Fixes: 7e28d0b26759 ("drm/i915/adl-n: Enable ADL-N platform")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621233005.3952293-1-daniele.ceraolospurio@intel.com
|
|
Delete the redundant word 'a'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Since commit b37a46683739 ("netdevice: add the case if dev is NULL"),
dev_put(NULL) is safe, check NULL before dev_put() is not needed.
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use eth_broadcast_addr() to set broadcast address instead of memset().
Signed-off-by: Lu Wei <luwei32@huawei.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Enable the support of creating all kinds of declared dummy packets
with the VLAN tags by inserting VLAN headers (single VLAN and QinQ
cases) if needed.
Decrease the number of declared dummy packets and increase in the
possible packet's combinations for adding switch rules.
This change enables support of creating filters that match both on
VLAN + tunnels properties in switchdev.
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Enable support for adding TC rules that filter on the VLAN tag type
in switchdev mode.
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Enable support for adding TC rules with both C-tag and S-tag that can
filter on the inner and outer VLAN in QinQ for basic packets (not
tunneled cases).
Signed-off-by: Wiktor Pilarczyk <wiktor.pilarczyk@intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Clear VF MAC from parent PF and remove VF filter from VSI when both
conditions are true:
-VIRTCHNL_VF_OFFLOAD_USO is not used
-VM MAC was not set from PF level
It affects older version of IAVF and it allow them to change MAC
Address on VM, newer IAVF won't change their behaviour.
Previously it wasn't possible to change VF's MAC Address on VM
because there is flag on IAVF driver that won't allow to
change MAC Address if this address is given from PF driver.
Fixes: 155f0ac2c96b ("iavf: allow permanent MAC address to change")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Dropped packets caused by too large frames were not included in
dropped RX packets statistics.
Issue was caused by not reading the GL_RXERR1 register. That register
stores count of packet which was have been dropped due to too large
size.
Fix it by reading GL_RXERR1 register for each interface.
Repro steps:
Send a packet larger than the set MTU to SUT
Observe rx statists: ethtool -S <interface> | grep rx | grep -v ": 0"
Fixes: 41a9e55c89be ("i40e: add missing VSI statistics")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When a local operation (invalidate mr, reg mr, bind mw) is finished there
will be no ack packet coming from a responder to cause the wqe to be
completed. This may happen anyway if a subsequent wqe performs
IO. Currently if the wqe is signalled the completer tasklet is scheduled
immediately but not otherwise.
This leads to a deadlock if the next wqe has the fence bit set in send
flags and the operation is not signalled. This patch removes the condition
that the wqe must be signalled in order to schedule the completer tasklet
which is the simplest fix for this deadlock and is fairly low cost. This
is the analog for local operations of always setting the ackreq bit in all
last or only request packets even if the operation is not signalled.
Link: https://lore.kernel.org/r/20220523223251.15350-1-rpearsonhpe@gmail.com
Reported-by: Jenny Hack <jhack@hpe.com>
Fixes: c1a411268a4b ("RDMA/rxe: Move local ops to subroutine")
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The synchronize_rcu may take several ms, which noticeably slows down
applications close SMI event handle. Use call_rcu to free client->fifo
and client asynchronously and eliminate the synchronize_rcu call in the
user thread.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SVM range unmapped from GPUs when range is unmapped from CPU, or with
xnack on from MMU notifier when range is evicted or migrated.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Vladimir Oltean
Dave Airlie
Yang Yingliang
Nikita Travkin
Jilin Yuan
Miaoqian Lin
Xiang wangx
Jakub Kicinski
Alexander Lobakin
Linus Torvalds
Bob Pearson
Alex Deucher
Rodrigo Siqueira
Vladimir Zapolskiy
Robert Marko
Daniele Ceraolo Spurio
Ziyang Xuan
Lu Wei
Martyna Szapar-Mudlaw
Norbert Zulinski
Lukasz Cieplicki
Philip Yang