| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make it possible to walk the children of an ACPI device in the revese
order by defining acpi_dev_for_each_child_reverse() in analogy with
acpi_dev_for_each_child().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Instead of walking the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to carry out an action for all of
the given ACPI device's children.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Some pieces of modular code can benefit from using
acpi_dev_for_each_child(), so export it to modules.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Instead of using the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to find the next child of a given
ACPI device.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Instead of walking the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to carry out an action for all of
the given ACPI device's children.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Instead of walking the list of children of an ACPI device directly
in order to find the child matching a given bus address, use
acpi_find_child_by_adr() for this purpose.
Also notice that if acpi_find_child_by_adr() doesn't find a matching
child, acpi_find_child_device() will not find it too, so directly
replace usb_acpi_find_port() in usb_acpi_get_companion_for_port() with
acpi_find_child_by_adr() and drop it entirely.
Apart from simplifying the code, this will help to eliminate the
children list head from struct acpi_device as it is redundant and it
is used in questionable ways in some places (in particular, locking is
needed for walking the list pointed to it safely, but it is often
missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
|
|
Use acpi_find_child_by_adr() to find the child matching a given bus
address instead of tb_acpi_find_port() that walks the list of children
of an ACPI device directly for this purpose and drop the latter.
Apart from simplifying the code, this will help to eliminate the
children list head from struct acpi_device as it is redundant and it
is used in questionable ways in some places (in particular, locking is
needed for walking the list pointed to it safely, but it is often
missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
|
|
Rearrange the ACPI device lookup code used internally by
acpi_find_child_device() so it can avoid extra checks after finding
one object with a matching _ADR and use it for defining
acpi_find_child_by_adr() that will allow the callers to find a given
ACPI device's child matching a given bus address without doing any
other checks in check_one_child().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Define acpi_dev_has_children() as a wrapper around
acpi_dev_for_each_child() and use it to check if the given ACPI
device has any children instead of checking the children list
head in struct acpi_device.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Instead of walking the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to carry out an action for all of
the given ACPI device's children.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
clk_put() already checks the clk ptr using !clk and IS_ERR()
so there is no need to check it again before calling it.
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
clk_disable() already checks the clk ptr using IS_ERR_OR_NULL(clk) and
clk_enable() checks the clk ptr using !clk, so there is no need to check clk
ptr again before calling them.
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of
type int. Then, copy_from_user() may cause a heap overflow because it is used
as the third argument of copy_from_user().
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Each LFP may have different panel type which is stored in LFP data
data block. Based on the child device index respective panel-type/
panel-type2 field will be used.
v1: Initial rfc verion.
v2: Based on review comments from Jani,
- Used panel-type instead addition panel-index variable.
- DEVICE_HANDLE_* name changed and placed before DEVICE_TYPE_*
macro.
v3:
- passing intel_bios_encoder_data as argument of
intel_bios_init_panel(). Passing NULL to indicate encoder is not
initialized yet for dsi as current focus is to enable dual EDP. [Jani]
v4:
- encoder->devdata used which is initialized before from vbt
structure. [Jani]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620065138.5126-1-animesh.manna@intel.com
|
|
This reverts commit 73867c8709b5 ("drm/i915/display: Remove check for
low voltage sku for max dp source rate"), which, on an i7-11850H iGPU
with a Thinkpad X1 Extreme Gen 4, attached to a LG LP160UQ1-SPB1
embedded panel, causes wild flickering glitching technicolor
pyrotechnics on resumption from suspend. The display shows strobing
colors in an utter disaster explosion of pantone, as though bombs were
dropped on the leprechauns at the base of the rainbow.
Rebooting the machine fixes the issue, presumably because the display is
initialized by firmware rather than by i915. Otherwise, the GPU appears
to work fine.
Bisection traced it back to this commit, which makes sense given the
issues.
Note: This re-opens, and puts back to the drawing board,
https://gitlab.freedesktop.org/drm/intel/-/issues/5272 which was fixed
by the regressing commit.
Fixes: 73867c8709b5 ("drm/i915/display: Remove check for low voltage sku for max dp source rate")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613102241.9236-1-Jason@zx2c4.com
(cherry picked from commit d5929835080a60f9119d024fa42f315913942f76)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pass struct drm_i915_private * instead of struct drm_device *, and
rename dev_priv to i915.
v2: Rebase
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617094817.3466584-2-jani.nikula@intel.com
|
|
Split out the modeset hardware state readout and sanitize, or state
setup, to a separate file.
Do some drive-by checkpatch fixes while at it.
v2: Rebase
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617094817.3466584-1-jani.nikula@intel.com
|
|
Backmerging to get new regmap APIs of v5.19-rc1.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
This reverts commit 73867c8709b5 ("drm/i915/display: Remove check for
low voltage sku for max dp source rate"), which, on an i7-11850H iGPU
with a Thinkpad X1 Extreme Gen 4, attached to a LG LP160UQ1-SPB1
embedded panel, causes wild flickering glitching technicolor
pyrotechnics on resumption from suspend. The display shows strobing
colors in an utter disaster explosion of pantone, as though bombs were
dropped on the leprechauns at the base of the rainbow.
Rebooting the machine fixes the issue, presumably because the display is
initialized by firmware rather than by i915. Otherwise, the GPU appears
to work fine.
Bisection traced it back to this commit, which makes sense given the
issues.
Note: This re-opens, and puts back to the drawing board,
https://gitlab.freedesktop.org/drm/intel/-/issues/5272 which was fixed
by the regressing commit.
Fixes: 73867c8709b5 ("drm/i915/display: Remove check for low voltage sku for max dp source rate")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613102241.9236-1-Jason@zx2c4.com
|
|
There are some functions that were missed by commit d77e74561368 ("regmap:
Add bulk read/write callbacks into regmap_config") when support to define
bulk read/write callbacks in regmap_config was introduced.
The regmap_bulk_write() and regmap_noinc_write() functions weren't changed
to use the added map->write instead of the map->bus->write handler.
Also, the regmap_can_raw_write() was not modified to take map->write into
account. So will only return true if a bus with a .write callback is set.
Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-4-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Before adding support to define bulk read/write callbacks in regmap_config
by the commit d77e74561368 ("regmap: Add bulk read/write callbacks into
regmap_config"), the regmap_noinc_read() function returned an errno early
a map->bus->read callback wasn't set.
But that commit dropped the check and now a call to _regmap_raw_read() is
attempted even when bulk read operations are not supported. That function
checks for map->read anyways but there's no point to continue if the read
can't succeed.
Also is a fragile assumption to make so is better to make it fail earlier.
Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-3-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Support for drivers to define bulk read/write callbacks in regmap_config
was introduced by the commit d77e74561368 ("regmap: Add bulk read/write
callbacks into regmap_config"), but this commit wrongly dropped a check
in regmap_bulk_read() to determine whether bulk reads can be done or not.
Before that commit, it was checked if map->bus was set. Now has to check
if a map->read callback has been set.
Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-2-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull SCSI fixes from James Bottomley:
"Eight fixes, all in drivers (ufs, scsi_debug, storvsc, iscsi, ibmvfc).
Apart from the ufs command clearing updates, these are mostly minor
and obvious fixes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ibmvfc: Store vhost pointer during subcrq allocation
scsi: ibmvfc: Allocate/free queue resource only during probe/remove
scsi: storvsc: Correct reporting of Hyper-V I/O size limits
scsi: ufs: Fix a race between the interrupt handler and the reset handler
scsi: ufs: Support clearing multiple commands at once
scsi: ufs: Simplify ufshcd_clear_cmd()
scsi: iscsi: Exclude zero from the endpoint ID range
scsi: scsi_debug: Fix zone transition to full condition
|
|
Check vm_fault->pgoff before using it. When we removed the warning, we
also removed the check.
Fixes: 7b26e4e2119d ("udmabuf: drop WARN_ON() check.")
Reported-by: zdi-disclosures@trendmicro.com
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
PCI-specific power management (pci_driver.suspend and pci_driver.resume) is
deprecated. If drivers implement power management, they should use the
generic power management framework, not the PCI-specific hooks.
Convert the sample code to use the generic power management framework.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
PCI-specific power management (pci_driver.suspend and pci_driver.resume) is
deprecated. The cirrusfb driver has never implemented power management at
all, but if it ever does, it should use the generic power management
framework, not the PCI-specific hooks.
Remove the commented-out references to the PCI-specific power management
hooks.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Variable stolen_size can be left uninitialized in a code path with
INTEL_855_GMCH_GMS_DISABLED. Fix this by initializing the variable to 0.
Also fix indentation of function arguments.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Aperture size for i9x5 variants is determined from PCI base address.
if (pci_resource_start(pdev, 2) & 0x08000000)
*aperture_size = MB(128);
...
This condition is incorrect as 128 MiB address can have the address
set as 0x?8000000 or 0x?0000000. Also the code can be simplified to just
use pci_resource_len().
The true settings of the aperture size is in the MSAC register, which
could be used instead. However the value is used only as an info message,
so it doesn't matter.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Delete the redundant word 'its'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The topcliff-pch driver requires TX and RX buffers on all transfers, open
coding checks for this. Remove those open coded checks and instead rely on
the core functionality, which has the added bonus that it will fix up any
transfers submitted by drivers as needed rather than erroring out.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220615174138.4060912-1-broonie@kernel.org
|
|
There are no more used members in the struct intel_pingroup, drop them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Since struct intel_pingroup got a new member, switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Since struct intel_pingroup got a new member, switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Since struct intel_pingroup got a new member, switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Since struct intel_pingroup got a new member, switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Since struct intel_pingroup got a new member, switch the driver to use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add a new member to the struct intel_pingroup to cover generic
pin control group parameters. The idea is to convert all users
(one-by-one) to it and drop old members later on.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add a driver that handles the different NoCs found on SM6350, generated
from the downstream dtb.
We're exluding ALC, IP0 and all _display nodes. ALC will not be voted
from the kernel[1] and IP0 is handled by the clk-rpmh driver[2].
[1] https://lore.kernel.org/linux-arm-msm/1e79c73f22c8891dc9f868babd940fca@codeaurora.org/
[2] https://lore.kernel.org/linux-arm-msm/20220412220033.1273607-1-swboyd@chromium.org/
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20220525144404.200390-5-luca.weiss@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
As per e39bf2972c6e ("interconnect: icc-rpm: Support child NoC device
probe") also update the rpmh interconnect driver to support probing NoCs
that are modelled as child devices of a different NoC.
As the driver doesn't yet use the 'reg' property, no change is done for
that.
Downstream DT reference:
https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/tags/android-11.0.0_r0.56/qcom/lagoon-bus.dtsi
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20220525144404.200390-2-luca.weiss@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Change the debug print format for the PIO, MWDMA and UDMA masks from
long to int to match the new type used for these fields in struct
ata_port_info.
Fixes: f0a6d77b351c ("ata: make transfer mode masks *unsigned int*")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
The MLO links used for connection with an MLD AP are decided by the
driver in case of SME offloaded to driver.
Add support for the drivers to indicate the information of links used
for MLO connection in connect and roam callbacks, update the connected
links information in wdev from connect/roam result sent by driver.
Also, send the connected links information to userspace.
Add a netlink flag attribute to indicate that userspace supports
handling of MLO connection. Drivers must not do MLO connection when this
flag is not set. This is to maintain backwards compatibility with older
supplicant versions which doesn't have support for MLO connection.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Print the link ID in link_info_changed function.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add initial support to hwsim for creating MLO-capable
radios dynamically (and statically via module parameter,
but that's not really recommended.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add to hwsim a link_data structure.
For now, move the beacon interval and beacon timer to
the link_data structure (making them per link).
Set a beacon timer for each link and transmit a per
link beacon (pass the link_id to ieee80211_beacon_get).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Pass the link id through to the get_beacon and return
the beacon for a specific link id.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In start_ap and stop_ap mac80211 callbacks pass the link_id
to the drivers.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Replace the bss_info_changed callback with vif_cfg_changed
and link_info_changed callbacks (for vif changes and link
changes).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Start making some SMPS related code MLD-aware. This isn't
really done yet, but again cuts down our 'deflink' reliance.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Update the code in vht.c and add the link_id parameter where
necessary.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Make the channel context code MLO aware, along with some
functions that it uses, so that the chan.c file is now
MLD-clean and no longer uses deflink/bss_conf/etc.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
Rafael J. Wysocki
Yihao Han
Hyunwoo Kim
Animesh Manna
Jason A. Donenfeld
Jani Nikula
Thomas Zimmermann
Javier Martinez Canillas
Linus Torvalds
Gerd Hoffmann
Bjorn Helgaas
Petr Cvek
Xiang wangx
Mark Brown
Andy Shevchenko
Luca Weiss
Damien Le Moal
Veerendranath Jakkam
Shaul Triebitz
Johannes Berg