| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Local variable chan is initialized by an address of element of chan array
that is part of stm32_mdma_device struct, so it does not make sense to
compare chan with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/1655072638-9103-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Due to a silly oversight on my part, making the simple switch to
of_io_request_and_map() in the DT path inadvertently introduced
divergent behaviour, whereby failng to request an iomem region now
becomes fatal for DT, vs. being silently ignored for ACPI.
Refactor a bit harder, so that request errors are non-fatal in both
paths as intended, but also consistently reported as well.
Reported-by: Matt Ranostay <mranostay@ti.com>
Fixes: 2b2cd74a06c3 ("irqchip/gic-v3: Claim iomem resources")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/5f2b57a0131f3082fae9d3002d360bf784ccb092.1655387206.git.robin.murphy@arm.com
|
|
If CONFIG_PHYS_ADDR_T_64BIT is not set:
drivers/dma/apple-admac.c: In function ‘admac_cyclic_write_one_desc’:
drivers/dma/apple-admac.c:213:22: error: right shift count >= width of type [-Werror=shift-count-overflow]
213 | writel_relaxed(addr >> 32, ad->base + REG_DESC_WRITE(channo));
| ^~
Fix this by using the {low,upp}er_32_bits() helper macros to obtain the
address parts.
Reported-by: noreply@ellerman.id.au
Fixes: b127315d9a78c011 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Acked-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20220616141312.1953819-1-geert@linux-m68k.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The DEVICE_BUSY_TIMEOUT value is described in the Reference Manual as:
| Timeout waiting for NAND Ready/Busy or ATA IRQ. Used in WAIT_FOR_READY
| mode. This value is the number of GPMI_CLK cycles multiplied by 4096.
So instead of multiplying the value in cycles with 4096, we have to
divide it by that value. Use DIV_ROUND_UP to make sure we are on the
safe side, especially when the calculated value in cycles is smaller
than 4096 as typically the case.
This bug likely never triggered because any timeout != 0 usually will
do. In my case the busy timeout in cycles was originally calculated as
2408, which multiplied with 4096 is 0x968000. The lower 16 bits were
taken for the 16 bit wide register field, so the register value was
0x8000. With 2970bf5a32f0 ("mtd: rawnand: gpmi: fix controller timings
setting") however the value in cycles became 2384, which multiplied
with 4096 is 0x950000. The lower 16 bit are 0x0 now resulting in an
intermediate timeout when reading from NAND.
Fixes: b1206122069aa ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220614083138.3455683-1-s.hauer@pengutronix.de
|
|
Add the [484,498,445.3]MHz frequency support that will be used
by video subsystem on imx93.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-8-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
According to Reference Manual:
000b - Divide by 1
001b - Divide by 1
010b - Divide by 2
011b - Divide by 3
100b - Divide by 4
101b - Divide by 5
110b - Divide by 6
111b - Divide by 7
So only need increase rdiv by 1 when the register value is 0.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-7-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
The PLL parameters in rate table should be directly compared with
those read from PLL registers instead of the cooked ones.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-6-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
According to spec:
A value of 0 is disallowed and should not be programmed in this register
Fix to 1.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-5-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
For EDMA1 in AONMIX, its parent clock should be from cm33_root,
so Correct it.
Fixes: 24defbe194b65("clk: imx: add i.MX93 clk")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
NIC_MEDIA sources from media_axi_root, not media_apb_root.
Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
When debug, find after system boot up, all adc register operation
will trigger system hang, this is because the internal adc ipg
clock is gate off. In dts, only reference the IMX93_CLK_ADC1_GATE,
which is adc1, no one touch the adc_root, so adc_root will be gate
off automatically after system boot up.
Fixes: 24defbe194b6 ("clk: imx: add i.MX93 clk")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20220609132902.3504651-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Abstract the bit extraction from the VBT per-panel bitfields
slightly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Older VBTs don't have all the stuff we've defined for the
LVDS options block (40). In particular we're currently parsing
the DPS panel type bits even though they may not exist, which
could mean we end up flagging the machine as supporting static
DRRS when the VBT declared no such thing.
We don't actually have a clear idea which VBT versions have
which bits so we rely on the block size instead.
Here's a quick list from my VBT stash:
mgm version 108 -> 4 bytes
alv version 120 -> 4 bytes
cst version 134 -> 14 bytes
pnv version 144 -> 14 bytes
cl version 142 -> 16 bytes
ctg version 155 -> 24 bytes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-2-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
Parsing the panel_type is a bit special and should be done
before we parse anything else potentially panel-specific from
the VBT. So move it out from parse_panel_options(). It doesn't
neet to be there anyway since it'll do its own LVDS options
block lookup.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615151445.8531-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
The WARN shouldn't have been added yet. For the moment the
clock that gets passed here is just what the user has requested
(via the modeline) and may not be exactly what iCLKIP can
generate.
Later on the plan is to change things so that we already get
passed the exact clock here, at which point the WARN should
be reintroduced.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6246
Fixes: 97708335b04d ("drm/i915: Introduce struct iclkip_params")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616095530.15024-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make sure FIFO underrun reporting is flagged as disabled very
early during the state readout so that we don't get any
spurious FIFO underruns reports from intel_crtc_disable_noatomic().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615174851.20658-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pull the underrun status sanitation into its own helper.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615174851.20658-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Connector polling is waking up the polled device. Polling
is unnecessary if our device is known to not have display.
Fix this and save some power by disabling starting connector
polling when we are having headless sku. Use information from
opregion.
v2: Move headless sku check into INTEL_DISPLAY_ENABLED macro
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-4-jouni.hogander@intel.com
|
|
Currently we are starting connector polling if display is disabled
using disable_display module parameter. Polling is just returning
always "not connected" state. This can be optimized by not starting
polling at all.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-3-jouni.hogander@intel.com
|
|
Export headless sku bit (bit 13) from opregion->header->pcon as an
interface to check if our device is headless configuration.
This is mainly targeted for hybrid gfx systems. E.g. when display
is not supposed to be connected discrete graphics card it's
opregion can inform this is headless graphics card.
v3: Dummy version is now static inline function
v2: Check also opregion version
Bspec: 53441
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610085429.52935-2-jouni.hogander@intel.com
|
|
The BCM2711 has a separate driver for the v3d, and thus we can't call
into any of the driver entrypoints that rely on the v3d being there.
Let's add a bunch of checks and complain loudly if that ever happen.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-15-maxime@cerno.tech
|
|
When doing an asynchronous page flip (PAGE_FLIP ioctl with the
DRM_MODE_PAGE_FLIP_ASYNC flag set), the current code waits for the
possible GPU buffer being rendered through a call to
vc4_queue_seqno_cb().
On the BCM2835-37, the GPU driver is part of the vc4 driver and that
function is defined in vc4_gem.c to wait for the buffer to be rendered,
and once it's done, call a callback.
However, on the BCM2711 used on the RaspberryPi4, the GPU driver is
separate (v3d) and that function won't do anything. This was working
because we were going into a path, due to uninitialized variables, that
was always scheduling the callback.
However, we were never actually waiting for the buffer to be rendered
which was resulting in frames being displayed out of order.
The generic API to signal those kind of completion in the kernel are the
DMA fences, and fortunately the v3d drivers supports them and signal
when its job is done. That API also provides an equivalent function that
allows to have a callback being executed when the fence is signalled as
done.
Let's change our driver a bit to rely on the previous function for the
older SoCs, and on DMA fences for the BCM2711.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://lore.kernel.org/r/20220610115149.964394-14-maxime@cerno.tech
|
|
The BCM2711 doesn't have a v3d GPU so we don't want to call into its BO
management code. Let's create an asynchronous page-flip handler for the
BCM2711 that just calls into the common code.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-13-maxime@cerno.tech
|
|
The function vc4_async_page_flip() handles asynchronous page-flips in
the vc4 driver.
However, it mixes some generic code with code that should only be run on
older generations that have the GPU handled by the vc4 driver.
Let's split the generic part out of vc4_async_page_flip() and into a
common function that we be reusable by an handler made for the BCM2711.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-12-maxime@cerno.tech
|
|
We'll soon introduce another completion callback source that won't need
to use the BO reference counting, so let's move it around to create a
function we will be able to share between both callbacks.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-11-maxime@cerno.tech
|
|
We'll need to extend the vc4_async_flip_state structure to rely on
another callback implementation, so let's move the current one into a
union.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-10-maxime@cerno.tech
|
|
On the BCM2711, we currently call the vc4_bo_cache_init() and
vc4_gem_init() functions. These functions initialize the BO and GEM
backends.
However, this code was initially created to accomodate the requirements
of the GPU on the older SoCs, while the BCM2711 has a separate driver
for it. So let's just skip these calls when we're on a newer hardware.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-9-maxime@cerno.tech
|
|
On the BCM2711, our current definition of drm_plane_helper_funcs uses
the custom vc4_prepare_fb() and vc4_cleanup_fb().
Those functions rely on the buffer allocation path that was relying on
the GPU, and is no longer relevant.
Let's create another drm_plane_helper_funcs structure that we will
register on the BCM2711.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-8-maxime@cerno.tech
|
|
On the BCM2711, our current definition of drm_mode_config_funcs uses the
custom vc4_fb_create().
However, that function relies on the buffer allocation path that was
relying on the GPU, and is no longer relevant.
Let's create another drm_mode_config_funcs structure that we will
register on the BCM2711.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-7-maxime@cerno.tech
|
|
Prior to the BCM2711/RaspberryPi4, the GPU was a part of the display
components of the SoC. It was thus a part of the vc4 driver.
However, with the BCM2711, it got split out and thus the v3d driver was
created. The vc4 driver now only handles the display part.
We didn't properly split out the code when doing the BCM2711 support
though, and most of the code around buffer allocations is still
involved, even though it doesn't have the backing hardware anymore.
Let's start the split out by creating a new drm_driver that only reports
and uses what we support on the BCM2711. The ioctl were properly
filtered already, but we were still exposing a .gem_create_object hook,
as well as having an .open and .postclose hooks which are only relevant
on older generations.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-6-maxime@cerno.tech
|
|
The vc4_bo_dumb_create() both fixes up the allocation arguments to match
the hardware constraints and actually performs the allocation.
Since we're going to introduce a new function that uses a different
allocator, let's split the arguments fixup to a separate function we
will be able to reuse.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-5-maxime@cerno.tech
|
|
We're going to add a new variant of the dumb BO allocation function, so
let's rename vc4_dumb_create() to something a bit more specific.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-4-maxime@cerno.tech
|
|
A new generation of controller has been introduced with the
BCM2711/RaspberryPi4. This generation needs a bunch of quirks, and over
time we've piled on a number of checks in most parts of the drivers.
All these checks are performed several times, and are not always
consistent. Let's create a single, global, variable to hold it and use
it everywhere.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-3-maxime@cerno.tech
|
|
The vc4 planes are setup in hardware by creating a hardware descriptor
in a dedicated RAM. As part of the process to setup a plane in KMS, we
thus need to allocate some part of that dedicated RAM to store our
descriptor there.
The async update path will just reuse the descriptor already allocated
for that plane and will modify it directly in RAM to match whatever has
been asked for.
In order to do that, it will compare the descriptor for the old plane
state and the new plane state, will make sure they fit in the same size,
and check that only the position or buffer address have changed.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220610115149.964394-2-maxime@cerno.tech
|
|
noop_backing_dev_info is used by superblocks of various
pseudofilesystems such as kdevtmpfs. After commit 10e14073107d
("writeback: Fix inode->i_io_list not be protected by inode->i_lock
error") this broke because __mark_inode_dirty() started to access more
fields from noop_backing_dev_info and this led to crashes inside
locked_inode_to_wb_and_lock_list() called from __mark_inode_dirty().
Fix the problem by initializing noop_backing_dev_info before the
filesystems get mounted.
Fixes: 10e14073107d ("writeback: Fix inode->i_io_list not be protected by inode->i_lock error")
Reported-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reported-and-tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Add a handler of the XDP_REDIRECT return code from a XDP program. The
packets will be flushed at the end of each RX/CQ NAPI poll cycle.
ndo_xdp_xmit() is implemented by sharing the code in mana_xdp_tx().
Ethtool per queue counters are added for XDP redirect and xmit operations.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This minimal PF driver runs on bare metal.
Currently Ethernet TX/RX works. SR-IOV management is not supported yet.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Co-developed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It is possible that the error case for devm_clk_get() returns NULL,
in which case zero will be passed to PTR_ERR() as shown by the Smatch
static checker warning:
drivers/spi/spi-microchip-core.c:557 mchp_corespi_probe()
warn: passing zero to 'PTR_ERR'
Remove the NULL check and carry on with a dummy clock in case of an
error. To avoid a potential div zero, abort calculating clkgen if
clk_get_rate(spi->clk) is zero.
Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/linux-spi/20220615091633.GI2168@kadam/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220615142028.2991915-1-conor.dooley@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some bootloader may set the force speed regs even if the actual
interface should use autonegotiation between PCS and PHY.
This cause the complete malfuction of the interface.
To fix this correctly reset the force speed regs if a fixed-link is not
defined in the DTS. With a fixed-link node correctly configure the
forced speed regs to handle any misconfiguration by the bootloader.
Reported-by: Mark Mentovai <mark@moxienet.com>
Co-developed-by: Mark Mentovai <mark@moxienet.com>
Signed-off-by: Mark Mentovai <mark@moxienet.com>
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20220614112228.1998-2-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The different gmacid require different configuration based on the soc
and on the gmac id. Add these missing configuration taken from the
original driver.
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20220614112228.1998-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With the addition of clock-output-names, we can now unify the internal
clock naming for omap4 and 5 to follow the other TI SoCs.
We are still using legacy clkctrl names for omap4 and 5 based on the clock
manager name which is wrong. Instead, we want to use the clkctrl clock
based naming.
We must now also drop the legacy TI_CLK_CLKCTRL_COMPAT quirk for the
clkctrl clock.
This change will allow further devicetree warning cleanup as already
done for am3/4 and dra7.
Cc: linux-clk@vger.kernel.org
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220615064306.22254-1-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
If the component driver fails to bind, or is unbound, the driver data
for the top-level platform device points to a freed drm_device. If the
system is then suspended, the driver passes this dangling pointer to
drm_mode_config_helper_suspend(), which crashes.
Fix this by only setting the driver data while the platform driver holds
a reference to the drm_device.
Fixes: 624b4b48d9d8 ("drm: sun4i: Add support for suspending the display driver")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615054254.16352-1-samuel@sholland.org
|
|
commit 6de79dd3a920 ("drm/bridge: display-connector: add ddc-en gpio
support") added a consumer for this GPIO in the HDMI connector device.
This new consumer conflicts with the pre-existing GPIO consumer in the
sun8i HDMI controller driver, which prevents the driver from probing:
[ 4.983358] display-connector connector: GPIO lookup for consumer ddc-en
[ 4.983364] display-connector connector: using device tree for GPIO lookup
[ 4.983392] gpio-226 (ddc-en): gpiod_request: status -16
[ 4.983399] sun8i-dw-hdmi 6000000.hdmi: Couldn't get ddc-en gpio
[ 4.983618] sun4i-drm display-engine: failed to bind 6000000.hdmi (ops sun8i_dw_hdmi_ops [sun8i_drm_hdmi]): -16
[ 4.984082] sun4i-drm display-engine: Couldn't bind all pipelines components
[ 4.984171] sun4i-drm display-engine: adev bind failed: -16
[ 4.984179] sun8i-dw-hdmi: probe of 6000000.hdmi failed with error -16
Both drivers have the same behavior: they leave the GPIO active for the
life of the device. Let's take advantage of the new implementation, and
drop the now-obsolete code from the HDMI controller driver.
Fixes: 6de79dd3a920 ("drm/bridge: display-connector: add ddc-en gpio support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220614073100.11550-1-samuel@sholland.org
|
|
Now that the PHY ops are separated, sort them topologically, with the
common sun8i_hdmi_phy_set_polarity helper at the top. No function
contents are changed in this commit.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-7-samuel@sholland.org
|
|
Since the driver already needs to support multiple sets of ops, we can
drop the mid-layer used by the A83T and H3 PHYs. They share only a small
amount of code; factor this out as sun8i_hdmi_phy_set_polarity.
For clarity, this commit keeps the existing function order.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-6-samuel@sholland.org
|
|
The D1 SoC comes with a new custom HDMI PHY, which does not share any
registers with the existing custom PHY. So it needs a new set of ops.
Instead of providing a flag in the variant structure, provide the ops
themselves.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-5-samuel@sholland.org
|
|
Now that the HDMI PHY is using a platform driver, it can use device-
managed resources. Use these, as well as the dev_err_probe helper, to
simplify the probe function and get rid of the remove function.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-4-samuel@sholland.org
|
|
The struct resource is not used for anything else, so we can simplify
the code a bit by using the helper function.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-3-samuel@sholland.org
|
|
Now that the HDMI PHY is using a platform driver, we can use the usual
helper function for getting the variant structure.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220615045543.62813-2-samuel@sholland.org
|
|
Use the new interface to check the capability for our device
specifically.
Link: https://lore.kernel.org/r/96ffe7050da0aa0ad6bce4705c3532f3ecaf32e3.1654688682.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
Alexey Khoroshilov
Robin Murphy
Geert Uytterhoeven
Sascha Hauer
Peng Fan
Liu Ying
Jacky Bai
Haibo Chen
Ville Syrjälä
Jouni Högander
Maxime Ripard
Jan Kara
Haiyang Zhang
Dexuan Cui
Conor Dooley
Christian 'Ansuel' Marangi
Tony Lindgren
Samuel Holland