aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-05-02drm/msm/disp/dpu1: add inline rotation support for sc7280Vinod Polimera4-29/+161
- Some DPU versions support inline rot90. It is supported only for limited amount of UBWC formats. - There are two versions of inline rotators, v1 (present on sm8250 and sm7250) and v2 (sc7280). These versions differ in the list of supported formats and in the scaler possibilities. Co-developed-by: Kalyan Thota <quic_kalyant@quicinc.com> Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/481672/ Link: https://lore.kernel.org/r/1649695021-19132-3-git-send-email-quic_vpolimer@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/disp/dpu1: add inline function to validate format supportVinod Polimera2-7/+25
Check if the dpu format is supported or not using dpu_find_format. Co-developed-by: Kalyan Thota <quic_kalyant@quicinc.com> Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/481670/ Link: https://lore.kernel.org/r/1649695021-19132-2-git-send-email-quic_vpolimer@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dpu: Bind pingpong block to intf on active ctls in cmd encoderMarijn Suijten1-0/+19
As per the specification of DPU_CTL_ACTIVE_CFG the configuration of active blocks should be proactively specified, and the pingpong block is no different. The downstream display driver [1] confirms this by also calling bind_pingpong_blk on CTL_ACTIVE_CFG. Note that this else-if is always entered, as setup_intf_cfg - unlike this mainline dpu driver that combines both behind the same function pointer - is left NULL in favour of using setup_intf_cfg_v1 when CTL_ACTIVE_CFG is set. This solves continuous timeouts on at least the Qualcomm sm6125 SoC: [drm:dpu_encoder_frame_done_timeout:2091] [dpu error]enc31 frame done timeout [drm:_dpu_encoder_phys_cmd_handle_ppdone_timeout.isra.0] *ERROR* id:31 pp:0 kickoff timeout 0 cnt 1 koff_cnt 1 [drm:dpu_encoder_phys_cmd_prepare_for_kickoff] *ERROR* failed wait_for_idle: id:31 ret:-110 pp:0 In the same way this pingpong block should also be unbound followed by an interface flush when the encoder is disabled, according to the downstream display driver [2]. [1]: https://source.codeaurora.org/quic/la/platform/vendor/opensource/display-drivers/tree/msm/sde/sde_encoder_phys_cmd.c?h=LA.UM.9.16.r1-08500-MANNAR.0#n167 [2]: https://source.codeaurora.org/quic/la/platform/vendor/opensource/display-drivers/tree/msm/sde/sde_encoder.c?h=LA.UM.9.16.r1-08500-MANNAR.0#n2986 Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/475874/ Link: https://lore.kernel.org/r/20220223114011.219044-1-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dpu: drop INTF_EDP from interface type conditionsDmitry Baryshkov2-3/+2
To remove possible confusion between (old) INTF_EDP and newer INTF_DP, stop using INTF_EDP in DPU's code. Until the 8x74/8x84 SoCs are supported by DPU driver, there is no point in using INTF_EDP. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/475560/ Link: https://lore.kernel.org/r/20220222062246.242577-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dpu: drop obsolete INTF_EDP commentDmitry Baryshkov1-11/+0
DPU driver never supported INTF_EDP, so let's drop the obsolete comment. If at some point 8x74/8x84's INTF_EDP is ported to DPU driver, corresponding handling will have to be ported too. Until that time, the comment serves no purpose. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/475557/ Link: https://lore.kernel.org/r/20220222062246.242577-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dpu: drop INTF_TYPE_MAX symbolDmitry Baryshkov1-1/+0
This enum value does not correspond to any of actual interface types, it's not used by the driver, and the value of INTF_WB is greater than INTF_TYPE_MAX. Thus this symbol serves no purpose and can be removed. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/475556/ Link: https://lore.kernel.org/r/20220222062246.242577-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dpu: document INTF_EDP/INTF_DP differenceDmitry Baryshkov1-0/+8
Based on the discussions on the mailing list, document enum dpu_intf_type and it's controversial fields: INTF_DP and INTF_EDP. INTF_EDP is used for older eDP interface found on msm8x74/msm8x84 INTF_DP is used for both eDP and DP interfaces handled by the msm/dp driver. The DPU driver does not make a difference between them. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/475555/ Link: https://lore.kernel.org/r/20220222062246.242577-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dpu: pass irq to dpu_encoder_helper_wait_for_irq()Dmitry Baryshkov5-28/+29
Pass IRQ number directly rather than passing an index in the dpu_encoder's irq table. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474703/ Link: https://lore.kernel.org/r/20220217043148.480898-7-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dpu: remove struct dpu_encoder_irqDmitry Baryshkov4-107/+58
Remove additional indirection: specify IRQ callbacks and IRQ indices directly rather than through the pointer in the irq structure. For each IRQ we have a constant IRQ callback. This change simplifies code review as the reader no longer needs to remember which function is called. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474700/ Link: https://lore.kernel.org/r/20220217043148.480898-6-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dpu: get rid of dpu_encoder_helper_(un)register_irqDmitry Baryshkov6-118/+48
Get rid of dpu_encoder_helper_register_irq/unregister_irq helpers, call dpu_core_register/unregister_callback directly, without surrounding them with helpers. Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474698/ Link: https://lore.kernel.org/r/20220217043148.480898-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dpu: allow just single IRQ callbackDmitry Baryshkov9-147/+84
DPU interrupts code allows multiple callbacks per interrut. In reality none of the interrupts is shared between blocks (and will probably never be). Drop support for registering multiple callbacks per interrupt to simplify interrupt handling code. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/474701/ Link: https://lore.kernel.org/r/20220217043148.480898-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dpu: remove always-true argument of dpu_core_irq_read()Dmitry Baryshkov3-7/+4
The argument clear of the function dpu_core_irq_read() is always true. Remove it. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474697/ Link: https://lore.kernel.org/r/20220217043148.480898-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-02drm/msm/dpu: remove extra wrappers around dpu_core_irqDmitry Baryshkov3-33/+15
Remove extra dpu_irq_* wrappers from dpu_kms.c, merge them directly into dpu_core_irq_* functions. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474696/ Link: https://lore.kernel.org/r/20220217043148.480898-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-05-01pinctrl: stm32: improve bank clocks managementFabien Dessenne4-53/+34
Instead of enabling/disabling the clock at each IO configuration update, just keep the clock enabled from the probe. This makes things simpler and more efficient (e.g. the time required to toggle an output IO is drastically decreased) without significantly increasing the power consumption. Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20220422143608.226580-1-fabien.dessenne@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-05-01Merge tag 'v5.18-rc5' into develLinus Walleij487-3481/+5073
Merge in Linux 5.18-rc5 since new code to the STM32 driver depend in a non-trivial way on the fixes merged in -rc5. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-05-01pinctrl: mediatek: mt8365: fix IES control pinsMattijs Korpershoek1-1/+1
IES26 (BIT 16 of IES1_CFG_ADDR) controls the following pads: - PAD_I2S_DATA_IN (GPIO114) - PAD_I2S_LRCK (GPIO115) - PAD_I2S_BCK (GPIO116) The pinctrl table is wrong since it lists pins 114 to 112. Update the table with the correct values. Fixes: e94d8b6fb83a ("pinctrl: mediatek: add support for mt8365 SoC") Reported-by: Youngmin Han <Youngmin.Han@geappliances.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220426125714.298907-1-mkorpershoek@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-05-01pinctrl: ocelot: Fix for lan966x alt modeHoratiu Vultur1-1/+3
For lan966x, the GPIO 35 has the wrong function for alternate mode 2. The mode is not none but is PTP sync. Fixes: 531d6ab36571c2 ("pinctrl: ocelot: Extend support for lan966x") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> Link: https://lore.kernel.org/r/20220413192918.3777234-1-horatiu.vultur@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-05-01iio: ti-ads8688: use of_device_id for OF matchingKrzysztof Kozlowski1-0/+1
The of_device_id was added to allow module autoloading, but it should be also used to allow driver matching via Devicetree. This also fixes W=1 warning: drivers/iio/adc/ti-ads8688.c:501:34: error: ‘ads8688_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220501103447.111392-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-01iio: stmpe-adc: use of_device_id for OF matchingKrzysztof Kozlowski1-6/+7
The of_device_id was added to allow module autoloading, but it should be also used to allow driver matching via Devicetree. This also fixes W=1 warning: drivers/iio/adc/stmpe-adc.c:357:34: error: ‘stmpe_adc_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220501103447.111392-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-01iio: gyro: mpu3050: Make mpu3050_common_remove() return voidUwe Kleine-König3-5/+5
This function (up to now) returns zero unconditionally, so there isn't any benefit of returning a value. Make it return void to be able to see at a glance that the return value of mpu3050_i2c_remove is always zero. This patch is a preparation for making i2c remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220425191735.59032-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-01net: dsa: b53: convert to phylink_pcsRussell King (Oracle)5-72/+75
Convert B53 to use phylink_pcs for the serdes rather than hooking it into the MAC-layer callbacks. Fixes: 81c1681cbb9f ("net: dsa: b53: mark as non-legacy") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: adin1100: Add SQI supportAlexandru Tachici1-0/+52
Determine the SQI from MSE using a predefined table for the 10BASE-T1L. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: adin1100: Add initial support for ADIN1100 industrial PHYAlexandru Ardelean3-0/+248
The ADIN1100 is a low power single port 10BASE-T1L transceiver designed for industrial Ethernet applications and is compliant with the IEEE 802.3cg Ethernet standard for long reach 10 Mb/s Single Pair Ethernet. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: Add 10BASE-T1L support in phy-c45Alexandru Tachici2-5/+253
This patch is needed because the BASE-T1 uses different registers for status, control and advertisement to those already employed in the existing phy-c45 functions. Where required, genphy_c45 functions will now check whether the device supports BASE-T1 and use the specific registers instead: 45.2.7.19 BASE-T1 AN control register, 45.2.7.20 BASE-T1 AN status, 45.2.7.21 BASE-T1 AN advertisement register, 45.2.7.22 BASE-T1 AN LP Base Page ability register, 45.2.1.185 BASE-T1 PMA/PMD control register. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01ethtool: Add 10base-T1L link mode entryAlexandru Tachici3-3/+7
Add entry for the 10base-T1L full duplex mode. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01iio: mma8452: fix probe fail when device tree compatible is used.Haibo Chen1-5/+7
Correct the logic for the probe. First check of_match_table, if not meet, then check i2c_driver.id_table. If both not meet, then return fail. Fixes: a47ac019e7e8 ("iio: mma8452: Fix probe failing when an i2c_device_id is used") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1650876060-17577-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-05-01Merge tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-1/+5
Pull irq fix from Borislav Petkov: - Fix locking when accessing device MSI descriptors * tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bus: fsl-mc-msi: Fix MSI descriptor mutex lock for msi_first_desc()
2022-05-01rtw88: fix hw scan may cause disconnect issueChih-Kang Chang1-1/+11
After scan aborts we still receive some hw scan c2h packets, and processing these c2h commands will change current channel. If device already connect to other AP, driver will set wrong op channel due to current channel changed. The disconnection happens when hw scan back to wrong op channel that device can't receive beacon from AP. To fix this issue, we ignore the late c2h if we are not scanning, and set current channel back to op channel after scan to align the FW behavior. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220428020521.8015-3-pkshih@realtek.com
2022-05-01rtw88: fix not disabling beacon filter after disconnectionChih-Kang Chang1-1/+5
Correct the judgment to let beacon filter disable after disconnection. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220428020521.8015-2-pkshih@realtek.com
2022-05-01rtw88: add HT MPDU density value for each chipChih-Kang Chang6-1/+7
Each chip have best ampdu density value, the correct setting can improve throughput performance. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220428020521.8015-1-pkshih@realtek.com
2022-05-01net: dsa: mv88e6xxx: Cosmetic change spaces to tabs in dsa_switch_opsMarek Behún1-5/+5
All but 5 methods in dsa_swith_ops use tabs for indentation. Change the 5 methods that break this rule. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01pci_irq_vector() can't be used in atomic context any longer. This conflictsThomas Gleixner1-8/+8
with the usage of this function in nic_mbx_intr_handler(). Cache the Linux interrupt numbers in struct nicpf and use that cache in the interrupt handler to select the mailbox. Fixes: 495c66aca3da ("genirq/msi: Convert to new functions") Reported-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=2041772 Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01plfxlc: Remove unused include <linux/version.h>Jiapeng Chong1-1/+0
Eliminate the follow versioncheck warning: ./drivers/net/wireless/purelifi/plfxlc/usb.c: 20 linux/version.h not needed. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220429075459.72029-1-jiapeng.chong@linux.alibaba.com
2022-05-01soc: apple: Add RTKit IPC librarySven Peter5-0/+1190
Apple SoCs such as the M1 come with multiple embedded co-processors running proprietary firmware. Communication with those is established over a simple mailbox using the RTKit IPC protocol. This cannot be implemented inside the mailbox subsystem since on top of communication over channels we also need support for starting, hibernating and resetting these co-processors. We also need to handle shared memory allocations differently depending on the co-processor and don't want to split that across multiple drivers. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sven Peter <sven@svenpeter.dev>
2022-05-01soc: apple: Always include MakefileSven Peter1-1/+1
We want to allow the code inside drivers/soc/apple to be compiled with COMPILE_TEST but this will currently result in linking errors because ARCH_APPLE is not set and make will never recurse into drivers/soc/apple. Let's just unconditionally recurse into apple/ since all drivers in there are guarded by config options anyways. Signed-off-by: Sven Peter <sven@svenpeter.dev>
2022-05-01aoe: Avoid flush_scheduled_work() usageTetsuo Handa5-5/+15
Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_wq with local aoe_wq. Link: https://lkml.kernel.org/r/49925af7-78a8-a3dd-bce6-cfc02e1a9236@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/abb37616-eec9-2794-e21e-7c623085d987@I-love.SAKURA.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-01nfc: nfcmrvl: main: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugsDuoming Zhou1-1/+1
There are destructive operations such as nfcmrvl_fw_dnld_abort and gpio_free in nfcmrvl_nci_unregister_dev. The resources such as firmware, gpio and so on could be destructed while the upper layer functions such as nfcmrvl_fw_dnld_start and nfcmrvl_nci_recv_frame is executing, which leads to double-free, use-after-free and null-ptr-deref bugs. There are three situations that could lead to double-free bugs. The first situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_fw_dnld_start | ... | nfcmrvl_nci_unregister_dev release_firmware() | nfcmrvl_fw_dnld_abort kfree(fw) //(1) | fw_dnld_over | release_firmware ... | kfree(fw) //(2) | ... The second situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_fw_dnld_start | ... | mod_timer | (wait a time) | fw_dnld_timeout | nfcmrvl_nci_unregister_dev fw_dnld_over | nfcmrvl_fw_dnld_abort release_firmware | fw_dnld_over kfree(fw) //(1) | release_firmware ... | kfree(fw) //(2) The third situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_nci_recv_frame | if(..->fw_download_in_progress)| nfcmrvl_fw_dnld_recv_frame | queue_work | | fw_dnld_rx_work | nfcmrvl_nci_unregister_dev fw_dnld_over | nfcmrvl_fw_dnld_abort release_firmware | fw_dnld_over kfree(fw) //(1) | release_firmware | kfree(fw) //(2) The firmware struct is deallocated in position (1) and deallocated in position (2) again. The crash trace triggered by POC is like below: BUG: KASAN: double-free or invalid-free in fw_dnld_over Call Trace: kfree fw_dnld_over nfcmrvl_nci_unregister_dev nci_uart_tty_close tty_ldisc_kill tty_ldisc_hangup __tty_hangup.part.0 tty_release ... What's more, there are also use-after-free and null-ptr-deref bugs in nfcmrvl_fw_dnld_start. If we deallocate firmware struct, gpio or set null to the members of priv->fw_dnld in nfcmrvl_nci_unregister_dev, then, we dereference firmware, gpio or the members of priv->fw_dnld in nfcmrvl_fw_dnld_start, the UAF or NPD bugs will happen. This patch reorders destructive operations after nci_unregister_device in order to synchronize between cleanup routine and firmware download routine. The nci_unregister_device is well synchronized. If the device is detaching, the firmware download routine will goto error. If firmware download routine is executing, nci_unregister_device will wait until firmware download routine is finished. Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: stmmac: disable Split Header (SPH) for Intel platformsTan Tee Min2-1/+2
Based on DesignWare Ethernet QoS datasheet, we are seeing the limitation of Split Header (SPH) feature is not supported for Ipv4 fragmented packet. This SPH limitation will cause ping failure when the packets size exceed the MTU size. For example, the issue happens once the basic ping packet size is larger than the configured MTU size and the data is lost inside the fragmented packet, replaced by zeros/corrupted values, and leads to ping fail. So, disable the Split Header for Intel platforms. v2: Add fixes tag in commit message. Fixes: 67afd6d1cfdf("net: stmmac: Add Split Header support and enable it in XGMAC cores") Cc: <stable@vger.kernel.org> # 5.10.x Suggested-by: Ong, Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: enable memcg accounting for veth queuesVasily Averin1-1/+1
veth netdevice defines own rx queues and allocates array containing up to 4095 ~750-bytes-long 'struct veth_rq' elements. Such allocation is quite huge and should be accounted to memcg. Signed-off-by: Vasily Averin <vvs@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-01net: phy: marvell: update abilities and advertising when switching to SGMIIRobert Hancock1-1/+15
With some SFP modules, such as Finisar FCLF8522P2BTL, the PHY hardware strapping defaults to 1000BaseX mode, but the kernel prefers to set them for SGMII mode. When this happens and the PHY is soft reset, the BMSR status register is updated, but this happens after the kernel has already read the PHY abilities during probing. This results in support not being detected for, and the PHY not advertising support for, 10 and 100 Mbps modes, preventing the link from working with a non-gigabit link partner. When the PHY is being configured for SGMII mode, call genphy_read_abilities again in order to re-read the capabilities, and update the advertising field accordingly. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30Merge tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds2-1/+20
Pull driver core fixes from Greg KH: "Here are some small driver core and kernfs fixes for some reported problems. They include: - kernfs regression that is causing oopses in 5.17 and newer releases - topology sysfs fixes for a few small reported problems. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: fix NULL dereferencing in kernfs_remove topology: Fix up build warning in topology_is_visible() arch_topology: Do not set llc_sibling if llc_id is invalid topology: make core_mask include at least cluster_siblings topology/sysfs: Hide PPIN on systems that do not support it.
2022-04-30Merge tag 'char-misc-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds25-113/+148
Pull char/misc driver fixes from Greg KH: "Here are a small number of char/misc/other driver fixes for 5.18-rc5 Nothing major in here, this is mostly IIO driver fixes along with some other small things: - at25 driver fix for systems without a dma-able stack - phy driver fixes for reported issues - binder driver fixes for reported issues All of these have been in linux-next without any reported problems" * tag 'char-misc-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (31 commits) eeprom: at25: Use DMA safe buffers binder: Gracefully handle BINDER_TYPE_FDA objects with num_fds=0 binder: Address corner cases in deferred copy and fixup phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe() iio: imu: inv_icm42600: Fix I2C init possible nack iio: dac: ltc2688: fix voltage scale read interconnect: qcom: sdx55: Drop IP0 interconnects interconnect: qcom: sc7180: Drop IP0 interconnects phy: ti: Add missing pm_runtime_disable() in serdes_am654_probe phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe phy: ti: omap-usb2: Fix error handling in omap_usb2_enable_clocks bus: mhi: host: pci_generic: Flush recovery worker during freeze bus: mhi: host: pci_generic: Add missing poweroff() PM callback phy: ti: tusb1210: Fix an error handling path in tusb1210_probe() phy: samsung: exynos5250-sata: fix missing device put in probe error paths phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe phy: ti: Fix missing of_node_put in ti_pipe3_get_sysctrl() phy: ti: tusb1210: Make tusb1210_chg_det_states static iio:dac:ad3552r: Fix an IS_ERR() vs NULL check iio: sx9324: Fix default precharge internal resistance register ...
2022-04-30Merge tag 'tty-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds6-215/+293
Pull tty/serial fixes from Greg KH: "Here are some small serial driver fixes, and a larger number of GSM line discipline fixes for 5.18-rc5. These include: - lots of tiny n_gsm fixes for issues to resolve a number of reported problems. Seems that people are starting to actually use this code again. - 8250 driver fixes for some devices - imx serial driver fix - amba-pl011 driver fix All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (27 commits) tty: n_gsm: fix sometimes uninitialized warning in gsm_dlci_modem_output() serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device serial: 8250: Also set sticky MCR bits in console restoration tty: n_gsm: fix software flow control handling tty: n_gsm: fix invalid use of MSC in advanced option tty: n_gsm: fix broken virtual tty handling Revert "serial: sc16is7xx: Clear RS485 bits in the shutdown" tty: n_gsm: fix missing update of modem controls after DLCI open serial: 8250: Fix runtime PM for start_tx() for empty buffer serial: imx: fix overrun interrupts in DMA mode serial: amba-pl011: do not time out prematurely when draining tx fifo tty: n_gsm: fix incorrect UA handling tty: n_gsm: fix reset fifo race condition tty: n_gsm: fix missing tty wakeup in convergence layer type 2 tty: n_gsm: fix wrong signal octets encoding in MSC tty: n_gsm: fix wrong command frame length field encoding tty: n_gsm: fix wrong command retry handling tty: n_gsm: fix missing explicit ldisc flush tty: n_gsm: fix wrong DLCI release order tty: n_gsm: fix insufficient txframe size ...
2022-04-30Merge tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds26-44/+191
Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.18-rc5 for some reported issues and new quirks. They include: - dwc3 driver fixes - xhci driver fixes - typec driver fixes - new usb-serial driver ids - added new USB devices to existing quirk tables - other tiny fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits) usb: phy: generic: Get the vbus supply usb: dwc3: gadget: Return proper request status usb: dwc3: pci: add support for the Intel Meteor Lake-P usb: dwc3: core: Only handle soft-reset in DCTL usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind() usb: misc: eud: Fix an error handling path in eud_probe() usb: core: Don't hold the device lock while sleeping in do_proc_control() usb: dwc3: Try usb-role-switch first in dwc3_drd_init usb: dwc3: core: Fix tx/rx threshold settings usb: mtu3: fix USB 3.0 dual-role-switch from device to host xhci: Enable runtime PM on second Alderlake controller usb: dwc3: fix backwards compat with rockchip devices dt-bindings: usb: samsung,exynos-usb2: add missing required reg usb: misc: fix improper handling of refcount in uss720_probe() USB: Fix ehci infinite suspend-resume loop issue in zhaoxin usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLY usb: typec: ucsi: Fix role swapping usb: typec: ucsi: Fix reuse of completion structure usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions ...
2022-04-30Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-5/+5
Pull SCSI fix from James Bottomley: "One fix for an endless error loop with the target driver affecting tapes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: pscsi: Set SCF_TREAT_READ_AS_NORMAL flag only if there is valid data
2022-04-30soc: rockchip: Fix compile-testing SoC driversBrian Norris1-1/+1
Similar to commit 7f94b69ece51 ("ARM: ixp4xx: fix compile-testing soc drivers"). drivers/soc/rockchip/Kconfig makes plenty of provision for configuring drivers either for ARCH_ROCKCHIP or for COMPILE_TEST. But drivers/soc/Makefile pulls the rug out from under us, by refusing to build anything if we specified COMPILE_TEST but not ARCH_ROCKCHIP. Currently, I'm not aware of anything that breaks without this patch, but it certainly makes for confusing builds (CONFIG_ROCKCHIP_PM_DOMAINS=y, but we didn't actually compile the driver?) and leaves room for future error (I have pending patches that break confusingly with COMPILE_TEST=y even though their Kconfig dependencies seem correct [1]). Defer to drivers/soc/rockchip/{Makefile,Kconfig} to do the right thing. [1] e.g., https://lore.kernel.org/linux-rockchip/20220405184816.RFC.2.I2d73b403944f0b8b5871a77585b73f31ccc62999@changeid/ [RFC PATCH 2/2] PM / devfreq: rk3399_dmc: Block PMU during transitions Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220425184503.v3.3.Id5f16dec920f620120c0a143a97a12e16d401760@changeid Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-04-30soc: rockchip: power-domain: Replace dsb() with smb()Brian Norris1-2/+2
It's unclear if these are really needed at all, but seemingly their purpose is only as a write barrier. Use the general macro instead of the ARM-specific one. This driver is partially marked for COMPILE_TEST'ing, but it doesn't build under non-ARM architectures. Fix this up before *really* enabling it for COMPILE_TEST. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220426014545.628100-2-briannorris@chromium.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-04-30soc: rockchip: Clean up Kconfig whitespaceBrian Norris1-12/+12
There are spaces instead of tabs, and other inconsistent indentation. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220426014545.628100-1-briannorris@chromium.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-04-30eth: remove remaining copies of the NAPI_POLL_WEIGHT defineJakub Kicinski3-8/+5
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. This patch covers three more drivers which I missed in commit 5f012b40ef63 ("eth: remove copies of the NAPI_POLL_WEIGHT define"). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30net/funeth: simplify the return expression of fun_dl_info_get()Minghao Chi1-7/+1
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.