| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add registers that are used to configure the PTP pins. These registers
are used to enable the interrupts per PTP pin and to set the waveform
generated by the pin.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To read/write a value to a PHC, it is required to use a PTP pin.
Currently it is used pin 5, but change to pin 7 as is the last pin.
All the other pins will have different functions.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-26
This series contains updates to ice driver only.
Ivan Vecera removes races related to VF message processing by changing
mutex_trylock() call to mutex_lock() and moving additional operations
to occur under mutex.
Petr Oros increases wait time after firmware flash as current time is
not sufficient.
Jake resolves a use-after-free issue for mailbox snapshot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ordered with the smallest number at the top.
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220427075212.3409407-1-gengcixi@gmail.com
|
|
Writing volatile registers are instant according to Micron and do not
need any status polling. Remove status polling on volatile registers write.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-12-tudor.ambarus@microchip.com
|
|
Writing volatile registers are instant according to Cypress and do not
need any status polling. Remove status polling on volatile registers write.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-11-tudor.ambarus@microchip.com
|
|
Clean the op declaration and hide the details of each op. With this it
results a cleanner, easier to read code. No functional change expected.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Acked-by: Michael Walle <michael@walle.cc>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220420103427.47867-10-tudor.ambarus@microchip.com
|
|
Introduce template operation to remove code duplication.
Split spi_nor_cypress_octal_dtr_enable() in
spi_nor_cypress_octal_dtr_ena() spi_nor_cypress_octal_dtr_dis() as it no
longer made sense to try to keep everything alltogether: too many
"if (enable)" throughout the code, which made the code difficult to read.
Add debug messages in case spi_nor_read_id() fails.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-9-tudor.ambarus@microchip.com
|
|
Introduce template operation to remove code duplication.
Split spi_nor_micron_octal_dtr_enable() in spi_nor_micron_octal_dtr_en()
and spi_nor_micron_octal_dtr_dis() as it no longer made sense to try to
keep everything alltogether: too many "if (enable)" throughout the code,
which made the code difficult to follow. Add dev_dbg messages in case
spi_nor_read_id() fails.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-8-tudor.ambarus@microchip.com
|
|
There are manufacturers that use registers indexed by address. Some of
them support "read/write any register" opcodes. Provide core methods that
can be used by all manufacturers. SPI NOR controller ops are intentionally
not supported as we intend to move all the SPI NOR controller drivers
under the SPI subsystem.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Tested-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-7-tudor.ambarus@microchip.com
|
|
Use spi_nor_read_id() core method to avoid duplication of code. Now the ID
is read on the full SPI_NOR_MAX_ID_LEN instead of
round_up(nor->info->id_len, 2), but it doesn't harm to read more ID bytes,
so the change comes with no secondary effects. dev_dbg messages in case
spi_nor_read_id() fails, will be added in a further patch after we split
the octal DTR enable/disable methods.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-6-tudor.ambarus@microchip.com
|
|
RDID is used in the core to auto detect the flash, but also by some
manufacturer drivers that contain flashes that support Octal DTR mode,
so that they can read the flash ID after the switch to Octal DTR was made
to test if the switch was successful. Introduce a core method for RDID op
to avoid code duplication.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-5-tudor.ambarus@microchip.com
|
|
In case spi_nor_match_name() returned NULL, the auto detection was
issued twice. There's no reason to try to detect the same chip twice,
do the auto detection only once.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-4-tudor.ambarus@microchip.com
|
|
Similar to spi_nor_match_name() extend the search of flash_info through
all the manufacturers, this time doing the match by ID. There's no reason
to limit the search per manufacturer yet, do it globally, search the flash
in all the parts of all manufacturers in a single method.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-3-tudor.ambarus@microchip.com
|
|
The method is matching a flash_info entry by searching by name. Rename
the method for better clarity.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220420103427.47867-2-tudor.ambarus@microchip.com
|
|
Read back Status Register 1 to ensure that the written byte match the
received value and return -EIO if read back test failed.
Without this patch, spi_nor_write_16bit_sr_and_check() only check the
second half of the 16bit. It causes errors like spi_nor_sr_unlock()
return success incorrectly when spi_nor_write_16bit_sr_and_check()
doesn't write SR successfully.
Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()")
Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220126073227.3401275-1-chentsung@chromium.org
|
|
Replace macro MACvReadISR with VNSvInPortD and as it was the only
user, it can now be removed.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/ddd403a3f590cb81403197442b12c3986c98ba25.1651036713.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace macro MACvReadMIBCounter with VNSvInPortD and as it
was the only user, it can now be removed.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/e1b7156e2c689cf53c738642fd9b33816ec89f92.1651036713.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the handling of MEM_FRAG_TX/RX SMCs when the full memory descriptor
does not fit in a single innovation of a memory sharing request.
The current implementation expects a FFA_MEM_SHARE/FFA_MEM_LEND
call to always receive a FFA_SUCCESS response, however in the
case where a full descriptor does not fit inside the partitions
TX buffer, the call can instead complete with a FFA_MEM_FRAG_RX SMC
to request the next part of the descriptor to be transmitted.
Similarly a FFA_MEM_FRAG_TX call currently only expects
FFA_MEM_FRAG_RX as a response, however once the full descriptor
has been transmitted the FFA_SUCCESS ABI will be used to indicate
successful transmission.
Update the existing code to match the expected behaviour.
Link: https://lore.kernel.org/r/20220426121219.1801601-1-marc.bonnici@arm.com
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
When ACPI table includes _PLD fields for a device, create a new
directory (physical_location) in sysfs to share _PLD fields.
Currently without PLD information, when there are multiple of same
devices, it is hard to distinguish which device corresponds to which
physical device at which location. For example, when there are two Type
C connectors, it is hard to find out which connector corresponds to the
Type C port on the left panel versus the Type C port on the right panel.
With PLD information provided, we can determine which specific device at
which location is doing what.
_PLD output includes much more fields, but only generic fields are added
and exposed to sysfs, so that non-ACPI devices can also support it in
the future. The minimal generic fields needed for locating a device are
the following.
- panel
- vertical_position
- horizontal_position
- dock
- lid
Signed-off-by: Won Chung <wonchung@google.com>
Link: https://lore.kernel.org/r/20220314195458.271430-1-wonchung@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The commit a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is
invalid") only calls WARN() when IRQ0 is about to be returned, however
using IRQ0 is considered invalid (according to Linus) outside the arch/
code where it's used by the i8253 drivers. Many driver subsystems treat
0 specially (e.g. as an indication of the polling mode by libata), so
the users of platform_get_irq[_byname]() in them would have to filter
out IRQ0 explicitly and this (quite obviously) doesn't scale...
Let's finally get this straight and return -EINVAL instead of IRQ0!
Fixes: a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is invalid")
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/025679e1-1f0a-ae4b-4369-01164f691511@omp.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Compaction sysfs file is created via compaction_register_node in
register_node. But we forgot to remove it in unregister_node. Thus
compaction sysfs file is leaked. Using compaction_unregister_node
to fix this issue.
Fixes: ed4a6d7f0676 ("mm: compaction: add /sys trigger for per-node memory compaction")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Link: https://lore.kernel.org/r/20220401070905.43679-1-linmiaohe@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When there are 2 matched drivers for a device using
async probe mechanism, the dev->p->async_driver might
be overridden by the last attached driver.
So just skip the later one if the previous matched driver
was not handled by async thread yet.
Below is my use case which having this problem.
Make both driver mmcblk and mmc_test allow async probe,
the dev->p->async_driver will be overridden by the later driver
mmc_test and bind to the device then claim it for testing.
When it happen, mmcblk will never do probe again.
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Link: https://lore.kernel.org/r/20220316074328.1801-1-mark-pk.tsai@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch reports this issue
msm_ringbuffer.c:43:36: warning: symbol 'msm_sched_ops' was not declared. Should it be static?
msm_sched_ops is only used in msm_ringbuffer.c so change its
storage-class specifier to static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482883/
Link: https://lore.kernel.org/r/20220421131507.1557667-1-trix@redhat.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Remove unused MSM_DISPLAY_CAP_HOT_PLUG and MSM_DISPLAY_CAP_EDID
macros from msm_drv.h.
Even if we need these, there are drm equivalent ones present.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/482260/
Link: https://lore.kernel.org/r/1650049782-8421-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add the SC2730 PMIC support for module autoloading
through SPI modalises.
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220425132410.2708304-1-gengcixi@gmail.com
|
|
Use if and else instead of if(A) and if (!A).
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220424094552.105466-1-wanjiabing@vivo.com
|
|
Use if and else instead of if(A) and if (!A).
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220424094522.105262-1-wanjiabing@vivo.com
|
|
This read the country code from SMBIOS and send the country code
to firmware, firmware will indicate the regulatory domain info of the
country code and then ath11k will use the info.
dmesg:
[ 1242.637173] ath11k_pci 0000:02:00.0: chip_id 0x2 chip_family 0xb board_id 0xff soc_id 0x400c0200
[ 1242.637176] ath11k_pci 0000:02:00.0: fw_version 0x110b09e5 fw_build_timestamp 2021-06-22 09:32 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-02533-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
[ 1242.637253] ath11k_pci 0000:02:00.0: worldwide regdomain setting from SMBIOS
[ 1242.637259] ath11k_pci 0000:02:00.0: bdf variant name not found.
[ 1242.637261] ath11k_pci 0000:02:00.0: SMBIOS bdf variant name not set.
[ 1242.637263] ath11k_pci 0000:02:00.0: DT bdf variant name not set.
[ 1242.927543] ath11k_pci 0000:02:00.0: set current country pdev id 0 alpha2 00
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220421023501.32167-1-quic_wgong@quicinc.com
|
|
When ath11k modules are removed using rmmod with spectral scan enabled,
crash is observed. Different crash trace is observed for each crash.
Send spectral scan disable WMI command to firmware before cleaning
the spectral dbring in the spectral_deinit API to avoid this crash.
call trace from one of the crash observed:
[ 1252.880802] Unable to handle kernel NULL pointer dereference at virtual address 00000008
[ 1252.882722] pgd = 0f42e886
[ 1252.890955] [00000008] *pgd=00000000
[ 1252.893478] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 1253.093035] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.89 #0
[ 1253.115261] Hardware name: Generic DT based system
[ 1253.121149] PC is at ath11k_spectral_process_data+0x434/0x574 [ath11k]
[ 1253.125940] LR is at 0x88e31017
[ 1253.132448] pc : [<7f9387b8>] lr : [<88e31017>] psr: a0000193
[ 1253.135488] sp : 80d01bc8 ip : 00000001 fp : 970e0000
[ 1253.141737] r10: 88e31000 r9 : 970ec000 r8 : 00000080
[ 1253.146946] r7 : 94734040 r6 : a0000113 r5 : 00000057 r4 : 00000000
[ 1253.152159] r3 : e18cb694 r2 : 00000217 r1 : 1df1f000 r0 : 00000001
[ 1253.158755] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
[ 1253.165266] Control: 10c0383d Table: 5e71006a DAC: 00000055
[ 1253.172472] Process swapper/0 (pid: 0, stack limit = 0x60870141)
[ 1253.458055] [<7f9387b8>] (ath11k_spectral_process_data [ath11k]) from [<7f917fdc>] (ath11k_dbring_buffer_release_event+0x214/0x2e4 [ath11k])
[ 1253.466139] [<7f917fdc>] (ath11k_dbring_buffer_release_event [ath11k]) from [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx+0x1840/0x29cc [ath11k])
[ 1253.478807] [<7f8ea3c4>] (ath11k_wmi_tlv_op_rx [ath11k]) from [<7f8fe868>] (ath11k_htc_rx_completion_handler+0x180/0x4e0 [ath11k])
[ 1253.490699] [<7f8fe868>] (ath11k_htc_rx_completion_handler [ath11k]) from [<7f91308c>] (ath11k_ce_per_engine_service+0x2c4/0x3b4 [ath11k])
[ 1253.502386] [<7f91308c>] (ath11k_ce_per_engine_service [ath11k]) from [<7f9a4198>] (ath11k_pci_ce_tasklet+0x28/0x80 [ath11k_pci])
[ 1253.514811] [<7f9a4198>] (ath11k_pci_ce_tasklet [ath11k_pci]) from [<8032227c>] (tasklet_action_common.constprop.2+0x64/0xe8)
[ 1253.526476] [<8032227c>] (tasklet_action_common.constprop.2) from [<803021e8>] (__do_softirq+0x130/0x2d0)
[ 1253.537756] [<803021e8>] (__do_softirq) from [<80322610>] (irq_exit+0xcc/0xe8)
[ 1253.547304] [<80322610>] (irq_exit) from [<8036a4a4>] (__handle_domain_irq+0x60/0xb4)
[ 1253.554428] [<8036a4a4>] (__handle_domain_irq) from [<805eb348>] (gic_handle_irq+0x4c/0x90)
[ 1253.562321] [<805eb348>] (gic_handle_irq) from [<80301a78>] (__irq_svc+0x58/0x8c)
Tested-on: QCN6122 hw1.0 AHB WLAN.HK.2.6.0.1-00851-QCAHKSWPL_SILICONZ-1
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1649396345-349-1-git-send-email-quic_haric@quicinc.com
|
|
Currently, WBM idle ring HP is updated much before the shadow
configuration is sent to the FW. Any update to the shadow
registers before FW mode on request would not be reflected
on to the actual HW registers failing to bring up the device.
Send FW mode ON QMI request before WBM idle ring HP update
to fix this problem.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220406094107.17878-12-quic_mpubbise@quicinc.com
|
|
WCN6750 is a single PDEV non-DBS chip which supports 2G, 5G and 6G bands.
It is a single LMAC device which can be either hooked to 2G/5G/6G bands.
Add WMI changes to support WCN6750.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220406094107.17878-11-quic_mpubbise@quicinc.com
|
|
Though WCN6750 is a single PDEV device, it is not a
DBS solution. So, do not put HW in DBS mode for WCN6750.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220406094107.17878-10-quic_mpubbise@quicinc.com
|
|
To avoid AUX timeouts and subsequent spurious hotplug interrupts, make
sure that the first DPCD access during detection is a read from an LTTPR
register.
Some ADLP DP link configuration at least with multiple LTTPRs expects
the first DPCD access during the LTTPR/DPCD detection after hotplug to
be a read from the LTTPR range starting with
DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV. The side effect of
this read is to put each LTTPR into the LTTPR transparent or LTTPR
non-transparent mode.
The lack of the above read may leave some of the LTTPRs in non-LTTPR
mode, while other LTTPRs in LTTPR transparent or LTTPR non-transparent
mode (for instance LTTPRs after system suspend/resume that kept their
mode from before suspend). Due to the different AUX timeouts the
different modes imply, the DPCD access from a non-LTTPR range will
timeout and lead to an LTTPR generated hotplug towards the source (which
the LTTPR firmware uses to account for buggy TypeC adapters with a long
wake-up delay).
SYSCROS: 72939
v2: Keep DPCD read-out working on non-LTTPR platforms.
v3: Summarize what and why the patch does at the beginning of the commit
log. (Jani)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220408224629.845887-1-imre.deak@intel.com
|
|
Add a format helper that converts RGB565 to XRGB8888. Use this
function in drm_fb_blit_toio(). Fixes simpledrm output for this
combination of formats.
UEFI and/or Grub will usually set 32-bit output in XRGB8888 format.
The issue can be reproduced by enabling simpledrm and requesting a
console framebuffer of different format on the kernel command line;
for example
nomodeset video=1024x768-16
In this case, conversion helpers will display nothing on the console.
The patch makes this work by implementing the rsp conversion helpers.
It also enables odd userspace configurations, such as running Xorg
with 16-bit color depth on a 32-bit output buffer.
v2:
* use helpers for struct drm_rect (Javier)
* improve commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425075939.30450-4-tzimmermann@suse.de
|
|
Add a format helper that converts RGB888 to XRGB8888. Use this
function in drm_fb_blit_toio(). Fixes simpledrm output for this
combination of formats.
UEFI and/or Grub will usually set 32-bit output in XRGB8888 format.
The issue can be reproduced by enabling simpledrm and requesting a
console framebuffer of different format on the kernel command line;
for example
nomodeset video=1024x768-24
In this case, conversion helpers will display nothing on the console.
The patch makes this work by implementing the rsp conversion helpers.
It also enables odd userspace configurations, such as running Xorg
with 24-bit color depth on a 32-bit output buffer.
v2:
* use helpers for struct drm_rect (Javier)
* improve commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425075939.30450-3-tzimmermann@suse.de
|
|
Not all possible format conversions are supported yet. Print a
warning on unsupported combinations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425075939.30450-2-tzimmermann@suse.de
|
|
Fix the following coccicheck warning:
drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:1604:2-4:
WARNING: possible condition with no effect (if == else).
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220425031725.5808-1-guozhengkui@vivo.com
|
|
This uses ISO3166 country code and 0 rev on brcmfmac43602 chips.
Without this patch 80 MHz width is not selected on 5 GHz channels.
Commit a21bf90e927f ("brcmfmac: use ISO3166 country code and 0 rev as
fallback on some devices") provides a way to specify chips for using the
fallback case.
Before commit 151a7c12c4fc ("Revert "brcmfmac: use ISO3166 country code
and 0 rev as fallback"") brcmfmac43602 devices works correctly and for
this specific case 80 MHz width is selected.
Signed-off-by: Hamid Zamani <hzamani.cs91@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220423111237.60892-1-hzamani.cs91@gmail.com
|
|
Using not existing queues can panic the kernel with rtl8180/rtl8185 cards.
Ignore the skb priority for those cards, they only have one tx queue. Pierre
Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum:
https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html
He also confirmed that this patch fixes the issue. In summary this happened:
After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a
"divide error: 0000" when connecting to an AP. Control port tx now tries to
use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in
2.10.
Since only the rtl8187se part of the driver supports QoS, the priority
of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185
cards.
rtl8180 is then unconditionally reading out the priority and finally crashes on
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this
patch:
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries
"ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got
initialized.
Cc: stable@vger.kernel.org
Reported-by: pa@panix.com
Tested-by: pa@panix.com
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220422145228.7567-1-alexander@wetzel-home.de
|
|
Write the BIT_USB_SUS_DIS bit rather than BIT_BT_DIG_CLK_EN to the
REG_HCI_OPT_CTRL register for fixing failure to PCIe power on.
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/YmLAzuyPr0P4Y6BP@ns.kevlo.org
|
|
With a recent change now it is possible to detect the strapping
option on SD8997, which allows to pick up a correct firmware
for either SDIO-SDIO or SDIO-UART.
This commit enables SDIO-UART firmware on SD8997.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220422090313.125857-3-andrejs.cainikovs@toradex.com
|
|
Some WiFi/Bluetooth modules might have different host connection
options, allowing to either use SDIO for both WiFi and Bluetooth,
or SDIO for WiFi and UART for Bluetooth. It is possible to detect
whether a module has SDIO-SDIO or SDIO-UART connection by reading
its host strap register.
This change introduces a way to automatically select appropriate
firmware depending of the connection method, and removes a need
of symlinking or overwriting the original firmware file with a
required one.
Host strap register used in this commit comes from the NXP driver [1]
hosted at Code Aurora.
[1] https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/net/wireless/nxp/mxm_wifiex/wlan_src/mlinux/moal_sdio_mmc.c?h=rel_imx_5.4.70_2.3.2&id=688b67b2c7220b01521ffe560da7eee33042c7bd#n1274
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220422090313.125857-2-andrejs.cainikovs@toradex.com
|
|
Fix following coccicheck error:
drivers/cpufreq/mediatek-cpufreq.c:464:16-23: ERROR: info is NULL but dereferenced.
Use pr_err instead of dev_err to avoid dereferring a NULL pointer.
Fixes: f52b16ba9fe4 ("cpufreq: mediatek: Use device print to show logs")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
If no handler is found in lpfc_complete_unsol_iocb() to match the rctl of a
received frame, the frame is dropped and resources are leaked.
Fix by returning resources when discarding an unhandled frame type. Update
lpfc_fc_frame_check() handling of NOP basic link service.
Link: https://lore.kernel.org/r/20220426181419.9154-1-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Smatch had the following warning:
drivers/scsi/lpfc/lpfc_sli.c:22305 lpfc_sli_prep_wqe() error: we previously assumed 'ndlp' could be null (see line 22298)
Remove the unnecessary null check.
Link: https://lore.kernel.org/r/20220426181315.8990-1-jsmart2021@gmail.com
Fixes: d51cf5bd926c ("scsi: lpfc: Fix field overload in lpfc_iocbq data structure")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync() and
pm_runtime_put_noidle(). This change is just to simplify the code, no
actual functional changes.
Link: https://lore.kernel.org/r/20220420090353.2588804-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining
GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp
register. It helped bring this register into a well-defined state so the
driver has to rely less on the bootloader to do things right.
Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any
possibility to configure it. Upon further testing it turns out that all
boards which are supported by the GSWIP driver in OpenWrt which use an
RMII PHY have a dedicated oscillator on the board which provides the
50MHz RMII reference clock.
Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always
clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is
a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set
the MAC also generates the RMII reference clock whose signal then
conflicts with the signal from the oscillator on the board. This results
in a constant cycle of the PHY detecting link up/down (and as a result
of that: the two ports using the AR8030 PHYs are not working).
At the time of writing this patch there's no known board where the MAC
(GSWIP) has to generate the RMII reference clock. If needed this can be
implemented in future by providing a device-tree flag so the
GSWIP_MII_CFG_RMII_CLK bit can be toggled per port.
Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits")
Tested-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix spelling in comment.
Fixes: 94abdad6974a ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Link: https://lore.kernel.org/r/20220425154856.169499-1-marcel@ziswiler.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The masking for PAC bits wasn't handling 32-bit architectures correctly.
Replace the u64 cast with uintptr_t.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/lkml/CAMuHMdVz-J-1ZQ08u0bsQihDkcRmEPrtX5B_oRJ+Ns5jrasnUw@mail.gmail.com
Fixes: 2e53b877dc12 ("lkdtm: Add CFI_BACKWARD to test ROP mitigations")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
Horatiu Vultur
David S. Miller
Cixi Geng
Tudor Ambarus
Chen-Tsung Hsieh
Philipp Hortmann
Marc Bonnici
Won Chung
Sergey Shtylyov
Miaohe Lin
Mark-PK Tsai
Tom Rix
Abhinav Kumar
Wan Jiabing
Wen Gong
Hari Chandrakanthan
Manikanta Pubbisetty
Imre Deak
Thomas Zimmermann
Guo Zhengkui
Hamid Zamani
Alexander Wetzel
Kevin Lo
Andrejs Cainikovs
James Smart
Minghao Chi
Martin Blumenstingl
Marcel Ziswiler
Kees Cook