| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Issue description:
When an OTG port has been switched to device role and then switch back
to host role again, the USB 3.0 Host (XHCI) will not be able to detect
"plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed)
devices until system reboot.
Root cause and Solution:
There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in
toggle_opstate(). At the end of role switch procedure, toggle_opstate()
will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was
set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN
will be skipped hence caused the port cannot detect connected USB 2.0
(Highspeed and Fullspeed) devices. Simply remove the condition check to
solve this issue.
Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support")
Cc: stable@vger.kernel.org
Tested-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Tainping Fang <tianping.fang@mediatek.com>
Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function rio_karam_init() should return -ENOMEM instead of
value 0 (USB_STOR_TRANSPORT_GOOD) when allocation fails.
Similarly, it should return -EIO when rio_karma_send_command() fails.
Fixes: dfe0d3ba20e8 ("USB Storage: add rio karma eject support")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220412144359.28447-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Address the following coccicheck warning:
drivers/usb/gadget/udc/net2280.c:940:20-21: WARNING opportunity for swap().
drivers/usb/gadget/udc/net2280.c:944:25-26: WARNING opportunity for swap().
by using swap() for the swapping of variable values and drop the tmp
variables (`tmp` and `end`) that are not needed any more.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220407100459.3605-1-guozhengkui@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Eliminate the follow smatch warning:
drivers/usb/gadget/function/u_audio.c:1182 g_audio_setup() warn:
inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220407062410.89214-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.
platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.
It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220309053611.2081191-1-chi.minghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The initFunction is called when probing a new device, its call relation
is like:
USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources()
-> isd200_init_info()
That is, the error return of the initFunction should tell USB core what
happened instead of using custom error code like ISD200_ERROR.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220407022110.3757-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The initFunction is called when probing a new device, its call relation
is like:
USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources()
-> init_usbat_cd() or init_usbat_flash() -> init_usbat()
That is, the error return of the initFunction should tell USB core what
happened instead of using constant or error code like
USB_STOR_TRANSPORT_FAILED.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220407022115.3773-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The initFunction is called when probing a new device, its call relation
is like:
USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources()
-> init_alauda()
That is, the error return of the initFunction should tell USB core what
happened instead of using error code like USB_STOR_TRANSPORT_ERROR.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20220407022058.3741-1-linma@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
powerpc's asm/prom.h brings some headers that it doesn't
need itself.
In order to clean it up in a further step, first clean all
files that include asm/prom.h
Some files don't need asm/prom.h at all. For those ones,
just remove inclusion of asm/prom.h
Some files don't need any of the items provided by asm/prom.h,
but need some of the headers included by asm/prom.h. For those
ones, add the needed headers that are brought by asm/prom.h at
the moment, then remove asm/prom.h
Some files really need asm/prom.h but also need some of the
headers included by asm/prom.h. For those one, leave asm/prom.h
but also add the needed headers so that they can be removed
from asm/prom.h in a later step.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/295e87a3094a92784657f7060fb0927e762a2e3c.1650011506.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function documentation of usb_set_configuration says that its
callers should hold the device lock. This lock is held for all
callsites except tweak_set_configuration_cmd. The code path can be
executed for example when attaching a remote USB device.
The solution is to surround the call by the device lock.
This bug was found using my experimental own-developed static analysis
tool, which reported the missing lock on v5.17.2. I manually verified
this bug report by doing code review as well. I runtime checked that
the required lock is not held. I compiled and runtime tested this on
x86_64 with a USB mouse. After applying this patch, my analyser no
longer reports this potential bug.
Fixes: 2c8c98158946 ("staging: usbip: let client choose device configuration")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220412165055.257113-1-dossche.niels@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_get_dev() is called in stub_device_alloc(). When stub_probe() fails
after that, usb_put_dev() needs to be called to release the reference.
Fix this by moving usb_put_dev() to sdev_free error path handling.
Find this by code review.
Fixes: 3ff67445750a ("usbip: fix error handling in stub_probe()")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220412020257.9767-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Alderlake has two XHCI controllers with PCI IDs 0x461e and 0x51ed. We
had previously added the quirk to default enable runtime PM for 0x461e,
now add it for 0x51ed as well.
Signed-off-by: Evan Green <evgreen@chromium.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220408114225.1.Ibcff6b86ed4eacfe4c4bc89c90e18416f3900a3e@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 33fb697ec7e5 ("usb: dwc3: Get clocks individually") moved from
the clk_bulk api to individual clocks, following the snps,dwc3.yaml
dt-binding for clock names.
Unfortunately the rk3328 (and upcoming rk356x support) use the
rockchip,dwc3.yaml which has different clock names, which are common on
devices using the glue layer.
The rk3328 does not use a glue layer, but attaches directly to the dwc3
core driver.
The offending patch series failed to account for this, thus dwc3 was
broken on rk3328.
To retain backwards compatibility with rk3328 device trees we must also
check for the alternate clock names.
Fixes: 33fb697ec7e5 ("usb: dwc3: Get clocks individually")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220409152116.3834354-1-pgwipeout@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usb_put_dev shouldn't be called when uss720_probe succeeds because of
priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL
before destroy_priv in uss720_disconnect because usb_put_dev is in
destroy_priv.
Fix this by moving priv->usbdev = NULL after usb_put_dev.
Fixes: dcb4b8ad6a44 ("misc/uss720: fix memory leak in uss720_probe")
Cc: stable <stable@kernel.org>
Reviewed-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220407024001.11761-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In zhaoxin platform, some ehci projects will latch a wakeup signal
internal when plug in a device on port during system S0. This wakeup
signal will turn on when ehci runtime suspend, which will trigger a
system control interrupt that will resume ehci back to D0. As no
device connect, ehci will be set to runtime suspend and turn on the
internal latched wakeup signal again. It will cause a suspend-resume
loop and generate system control interrupt continuously.
Fixed this issue by clear wakeup signal latched in ehci internal when
ehci resume callback is called.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Link: https://lore.kernel.org/r/20220324121735.3803-1-WeitaoWang-oc@zhaoxin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building without CONFIG_POWER_SUPPLY will fail:
drivers/usb/typec/rt1719.o: In function `rt1719_psy_set_property':
rt1719.c:(.text+0x10a): undefined reference to `power_supply_get_drvdata'
drivers/usb/typec/rt1719.o: In function `rt1719_psy_get_property':
rt1719.c:(.text+0x2c8): undefined reference to `power_supply_get_drvdata'
drivers/usb/typec/rt1719.o: In function `devm_rt1719_psy_register':
rt1719.c:(.text+0x3e9): undefined reference to `devm_power_supply_register'
drivers/usb/typec/rt1719.o: In function `rt1719_irq_handler':
rt1719.c:(.text+0xf9f): undefined reference to `power_supply_changed'
drivers/usb/typec/rt1719.o: In function `rt1719_update_pwr_opmode.part.9':
rt1719.c:(.text+0x657): undefined reference to `power_supply_changed'
drivers/usb/typec/rt1719.o: In function `rt1719_attach':
rt1719.c:(.text+0x83e): undefined reference to `power_supply_changed'
Add POWER_SUPPLY dependency to Kconfig.
Fixes: 25d29b980912 ("usb: typec: rt1719: Add support for Richtek RT1719")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20220418082425.41566-1-renzhijie2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All attempts to swap the roles timed out because the
completion was done without releasing the port lock. Fixing
that by releasing the lock before starting to wait for the
completion.
Link: https://lore.kernel.org/linux-usb/037de7ac-e210-bdf5-ec7a-8c0c88a0be20@gmail.com/
Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220405134824.68067-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The role swapping completion variable is reused, so it needs
to be reinitialised every time. Otherwise it will be marked
as done after the first time it's used and completing
immediately.
Link: https://lore.kernel.org/linux-usb/20220325203959.GA19752@jackp-linux.qualcomm.com/
Fixes: 6df475f804e6 ("usb: typec: ucsi: Start using struct typec_operations")
Cc: stable@vger.kernel.org
Reported-and-suggested-by: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220405134824.68067-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 41a7426d25fa ("usb: xhci: tegra: Unlink power domain devices")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220319023822.145641-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In AM62 SoC, the Designware Core USB3 IP is progammed to operate in USB2.0
only mode. Add driver for AM62 USB DWC3 Wrapper.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20220414103211.16202-3-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of refetching power status cache it and only update it when a
change is signalled via irq. This simplifies tracing and adding more
supply properties in follow up patches.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220317154518.4082046-2-sebastian.krzyszkowiak@puri.sm
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are few scenerio when PMC reports 'busy condition' and command
fail.
If PMC receives a high priority command while servicing a low priority
command then it discards the low priority command and start servicing
the high priority command. The lower priority command fail and driver
returns error. If the same command resend to the PMC then PMC latches
the command and service it accordingly.
Thus adds the retry logic for the PMC command.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Tanveer Alam <tanveer1.alam@intel.com>
Link: https://lore.kernel.org/r/20220328105137.6223-1-tanveer1.alam@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The exit condition to quit iterating over the sg_list, while encoding
the sg entries, has to consider the case that the dma_len of the entry
could be zero. This patch takes this condition to account.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On uvc_video_encode_isoc_sg the mapped vb2 buffer is returned
to early. Only after the last usb_request worked with the buffer
it is allowed to give it back to vb2. This patch fixes that.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-3-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function uvcg_queue_next_buffer is used different than its name
suggests. The return value nextbuf is never used by any caller. This
patch reworks the function to its actual purpose, by removing the unused
code and renaming it. The function name uvcg_complete_buffer makes it
more clear that it is actually marking the current video buffer as
complete.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220402232744.3622565-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The pause flag doesn't appear to serve a purpose as it is possible for
the pump worker thread to not be running when new buffers are queued.
Before the following change was introduced: "43cd0023872e usb: gadget:
uvc_video: add worker to handle the frame pumping", the pause flag
status was discarded and never returned. This masked a current issues of
the userspace receiving non-zero values (considered unsuccessful) and
prevents trace_v4l2_qbuf() from being called.
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20220413192402.26063-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a configfs entry, "function_name", to change the iInterface field
for VideoControl. This name is used on host devices for user selection,
useful when multiple cameras are present. The default will remain "UVC
Camera".
Signed-off-by: Dan Vacura <w36195@motorola.com>
Link: https://lore.kernel.org/r/20220401160447.5919-1-w36195@motorola.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support to checkpoint/restore GWS (Global Wave Sync) queues.
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated
each time the queue gets evicted.
Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue")
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Memory controller drivers for v5.19
1. Exynos: Reduce memory usage/allocation in Exynos5422 DMC driver.
2. Renesas:
- Add bindings for R-Car H3/M3/E3.
- Simplify single/double data register access.
3. Minor cleanups: TI/EMIF and FSL/Corenet.
* tag 'memory-controller-drv-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: fsl-corenet-cf: Use helper function devm_platform_ioremap_resource()
memory: renesas-rpc-if: Simplify single/double data register access
dt-bindings: memory: renesas,rpc-if: Document R-Car H3/M3/E3 support
memory: emif: remove unneeded ENOMEM error messages
memory: samsung: exynos5422-dmc: Avoid some over memory allocation
Link: https://lore.kernel.org/r/20220420072712.12648-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fixes for omaps
Few regression fixes for omap variants. These mostly fix issues related to
warnings added for system suspend, and some devicetree issues:
- Make ti-sysc driver quirks for gpt12 timer omap3 specific to fix
timer clock disabling for am335x system suspend
- Fix new system suspend warning for dra7 vpe caused by trying to
use register bits not wired for vpe
- Fix mmc boot order for omap3-gta04 that has no mmc2 or 3 wired
- Add missing touchscreen properties for am3
- Fix pin muxing for logicpd-som-lv and am3517-evm to not depend on
earlier bootloader versions
- Fix refcount leak for omap_gic_of_init
* tag 'omap-for-v5.18/fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
ARM: dts: am3517-evm: Fix misc pinmuxing
ARM: dts: am33xx-l4: Add missing touchscreen clock properties
ARM: dts: Fix mmc order for omap3-gta04
ARM: dts: dra7: Fix suspend warning for vpe powerdomain
bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific
ARM: OMAP2+: Fix refcount leak in omap_gic_of_init
iommu/omap: Fix regression in probe for NULL pointer dereference
Link: https://lore.kernel.org/r/pull-1650543308-836725@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
HyperFlash devices fail to probe:
rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed
In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits
(SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived
from half of the transfer size, cfr. the rpcif_bits_set() helper
function. However, rpcif_reg_{read,write}() does not take the bus size
into account, and does not double all Manual Mode Data Register access
sizes when communicating with a HyperFlash or Octal-SPI Flash device.
Fix this, and avoid the back-and-forth conversion between transfer size
and Transfer Data Enable bits, by explicitly storing the transfer size
in struct rpcif, and using that value to determine access size in
rpcif_reg_{read,write}().
Enforce that the "high" Manual Mode Read/Write Data Registers
(SM[RW]DR1) are only used for 8-byte data accesses.
While at it, forbid writing to the Manual Mode Read Data Registers,
as they are read-only.
Fixes: fff53a551db50f5e ("memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/cde9bfacf704c81865f57b15d1b48a4793da4286.1649681476.git.geert+renesas@glider.be
Link: https://lore.kernel.org/r/20220420070526.9367-1-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Intel drivers translate actions returned from XDP programs to their own
return codes that have the following mapping:
XDP_REDIRECT -> I40E_XDP_{REDIR,CONSUMED}
XDP_TX -> I40E_XDP_{TX,CONSUMED}
XDP_DROP -> I40E_XDP_CONSUMED
XDP_ABORTED -> I40E_XDP_CONSUMED
XDP_PASS -> I40E_XDP_PASS
Commit b8aef650e549 ("i40e, xsk: Terminate Rx side of NAPI when XSK Rx
queue gets full") introduced new translation
XDP_REDIRECT -> I40E_XDP_EXIT
which is set when XSK RQ gets full and to indicate that driver should
stop further Rx processing. This happens for unsuccessful
xdp_do_redirect() so it is valuable to call trace_xdp_exception() for
this case. In order to avoid I40E_XDP_EXIT -> IXGBE_XDP_CONSUMED
overwrite, XDP_DROP case was moved above which in turn made the
'fallthrough' that is in XDP_ABORTED useless as it became the last label
in the switch statement.
Simply drop this leftover.
Fixes: b8aef650e549 ("i40e, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220421132126.471515-3-maciej.fijalkowski@intel.com
|
|
Intel drivers translate actions returned from XDP programs to their own
return codes that have the following mapping:
XDP_REDIRECT -> IXGBE_XDP_{REDIR,CONSUMED}
XDP_TX -> IXGBE_XDP_{TX,CONSUMED}
XDP_DROP -> IXGBE_XDP_CONSUMED
XDP_ABORTED -> IXGBE_XDP_CONSUMED
XDP_PASS -> IXGBE_XDP_PASS
Commit c7dd09fd4628 ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx
queue gets full") introduced new translation
XDP_REDIRECT -> IXGBE_XDP_EXIT
which is set when XSK RQ gets full and to indicate that driver should
stop further Rx processing. This happens for unsuccessful
xdp_do_redirect() so it is valuable to call trace_xdp_exception() for
this case. In order to avoid IXGBE_XDP_EXIT -> IXGBE_XDP_CONSUMED
overwrite, XDP_DROP case was moved above which in turn made the
'fallthrough' that is in XDP_ABORTED useless as it became the last label
in the switch statement.
Simply drop this leftover.
Fixes: c7dd09fd4628 ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220421132126.471515-2-maciej.fijalkowski@intel.com
|
|
The stm32_gpio_get() should only be called for LEVEL triggered interrupts,
skip calling it for EDGE triggered interrupts altogether to avoid wasting
CPU cycles in EOI handler. On this platform, EDGE triggered interrupts are
the majority and LEVEL triggered interrupts are the exception no less, and
the CPU cycles are not abundant.
Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Fabien Dessenne <fabien.dessenne@foss.st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
To: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20220415215410.498349-1-marex@denx.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The first valid item of pin-function table should
start from the third item. The first two items,
due to historical and compatible reasons, should
be dummy items.
The two dummy items were removed accidentally in
initial submission. This fix adds them back.
Signed-off-by: Wells Lu <wellslutw@gmail.com>
Link: https://lore.kernel.org/r/1650015688-19774-1-git-send-email-wellslutw@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The SoC supports a debug clock output of its internal clocks. Depending
on the clk_sel input (GPIO_31) clk_mon (GPIO_30) will output either
cpu_clk/64 or sys_clk/64. This is very useful for debugging and is
missing in the pinmux table. Add it.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220326192848.2944519-2-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
According to the reference manual, you can mux the PWM output on GPIO27
and GPIO51. This was missing in the pinmux table. Add it.
Tested on a LAN9668 on GPIO51.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220326192848.2944519-1-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
PMX65 pmic support gpio controller so add compatible.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1649048650-14059-3-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The commit c8013355ead6 ("ARM: dts: gpio-ranges property is now required")
fixed the GPIO probing issues caused by "pinctrl: bcm2835: Change init
order for gpio hogs". This changed only the kernel DTS files. Unfortunately
it isn't guaranteed that these files are shipped to all users.
So implement the necessary backward compatibility for BCM2835 and
BCM2711 platform.
Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220409095129.45786-3-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Since commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
the device tree nodes of GPIO controller need the gpio-ranges property to
handle gpio-hogs. Unfortunately it's impossible to guarantee that every new
kernel is shipped with an updated device tree binary.
In order to provide backward compatibility with those older DTB, we need a
callback within of_gpiochip_add_pin_range() so the relevant platform driver
can handle this case.
Fixes: 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220409095129.45786-2-stefan.wahren@i2se.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We have now seen panel (XMG Core 15 e21 laptop) advertizing support
for Intel proprietary eDP backlight control via DPCD registers, but
actually working only with legacy pwm control.
This patch adds panel EDID check for possible HDR static metadata and
Intel proprietary eDP backlight control is used only if that exists.
Missing HDR static metadata is ignored if user specifically asks for
Intel proprietary eDP backlight control via enable_dpcd_backlight
parameter.
v2 :
- Ignore missing HDR static metadata if Intel proprietary eDP
backlight control is forced via i915.enable_dpcd_backlight
- Printout info message if panel is missing HDR static metadata and
support for Intel proprietary eDP backlight control is detected
Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5284
Cc: Lyude Paul <lyude@redhat.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Filippo Falezza <filippo.falezza@outlook.it>
Cc: stable@vger.kernel.org
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413082826.120634-1-jouni.hogander@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
|
|
These delays can be relatively large (e.g., hundreds of microseconds to
several milliseconds on RK3399 Gru systems). Per
Documentation/timers/timers-howto.rst, that should usually use a
sleeping delay. Let's use the existing regulator delay helper to handle
both large and small delays appropriately. This avoids burning a bunch
of CPU time and hurting scheduling latencies when hitting regulators a
lot (e.g., during cpufreq).
The sleep vs. delay issue choice has been made differently over time --
early versions of RK3399 Gru PWM-regulator support used usleep_range()
in pwm-regulator.c. More of this got moved into the regulator core,
in commits like:
73e705bf81ce regulator: core: Add set_voltage_time op
At the same time, the sleep turned into a delay.
It's OK to sleep in _regulator_do_set_voltage(), as we aren't in an
atomic context. (All our callers grab various mutexes already.)
I avoid using fsleep() because it uses a usleep_range() of [N to N*2],
and usleep_range() very commonly biases to the high end of the range. We
don't want to double the expected delay, especially for long delays.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220420141511.v2.2.If0fc61a894f537b052ca41572aff098cf8e7e673@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
I want to use it in other contexts besides _regulator_do_enable().
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220420141511.v2.1.I31ef0014c9597d53722ab513890f839f357fdfb3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
KASAN report slab-out-of-bounds in __regmap_init as follows:
BUG: KASAN: slab-out-of-bounds in __regmap_init drivers/base/regmap/regmap.c:841
Read of size 1 at addr ffff88803678cdf1 by task xrun/9137
CPU: 0 PID: 9137 Comm: xrun Tainted: G W 5.18.0-rc2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x15a lib/dump_stack.c:88
print_report.cold+0xcd/0x69b mm/kasan/report.c:313
kasan_report+0x8e/0xc0 mm/kasan/report.c:491
__regmap_init+0x4540/0x4ba0 drivers/base/regmap/regmap.c:841
__devm_regmap_init+0x7a/0x100 drivers/base/regmap/regmap.c:1266
__devm_regmap_init_i2c+0x65/0x80 drivers/base/regmap/regmap-i2c.c:394
da9121_i2c_probe+0x386/0x6d1 drivers/regulator/da9121-regulator.c:1039
i2c_device_probe+0x959/0xac0 drivers/i2c/i2c-core-base.c:563
This happend when da9121 device is probe by da9121_i2c_id, but with
invalid dts. Thus, chip->subvariant_id is set to -EINVAL, and later
da9121_assign_chip_model() will access 'regmap' without init it.
Fix it by return -EINVAL from da9121_assign_chip_model() if
'chip->subvariant_id' is invalid.
Fixes: f3fbd5566f6a ("regulator: da9121: Add device variants")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Adam Ward <Adam.Ward.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20220421090335.1876149-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The buffers passed in the data phase must be DMA-able. Programmers often
don't realise this requirement and pass in buffers that reside on the
stack. This can be hard to spot when reviewing code. Reject ops if their
data buffer is on the stack to avoid this.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220420102022.3310970-1-p.yadav@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Most of the plat-omap/dma.c code is specific to the USB
driver. Hide that code when it is not in use, to make it
clearer which parts are actually still required.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The innovator board needs a special case for its phy control.
Move the corresponding code into the board file and out of the
common code by adding another callback.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The omap-keypad driver currently relies on including mach/memory.h
implicitly, but that won't happen once omap1 is converted to
CONFIG_ARCH_MULTIPLATFORM. Include the required header
explicitly.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
Macpaul Lin
Lin Ma
Guo Zhengkui
Jiapeng Chong
Zhen Ni
Minghao Chi
Christophe Leroy
Niels Dossche
Hangyu Hua
Evan Green
Peter Geis
Weitao Wango
Ren Zhijie
Heikki Krogerus
zhangqilong
Aswath Govindraju
Guido Günther
Tanveer Alam
Michael Grzeschik
Dan Vacura
David Yat Sin
Arnd Bergmann
Geert Uytterhoeven
Maciej Fijalkowski
Marek Vasut
Wells Lu
Michael Walle
Rohit Agarwal
Stefan Wahren
Jouni Högander
Brian Norris
Wei Yongjun
Pratyush Yadav