aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-04-14drm/edid: have edid_block_check() detect blocks that are all zeroJani Nikula1-5/+14
We have the check function, have it also detect blocks that are all zero instead of leaving that to callers. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f9ad302e6b7dbcd1dff98d94ec5500ce27bebe10.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: convert edid_is_zero() to edid_block_is_zero() for blocksJani Nikula1-5/+5
As edid_is_zero() is only ever used on EDID blocks, convert it to edid_block_is_zero() with implicit block size. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5cc9387e22b4a61243df4053d1ebcc14b0007dc8.1649685475.git.jani.nikula@intel.com
2022-04-14rndis_host: limit scope of bogus MAC address detection to ZTE devicesLech Perczak1-5/+12
Reporting of bogus MAC addresses and ignoring configuration of new destination address wasn't observed outside of a range of ZTE devices, among which this seems to be the common bug. Align rndis_host driver with implementation found in cdc_ether, which also limits this workaround to ZTE devices. Suggested-by: Bjørn Mork <bjorn@mork.no> Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14rndis_host: enable the bogus MAC fixup for ZTE devices from cdc_etherLech Perczak1-0/+32
Certain ZTE modems, namely: MF823. MF831, MF910, built-in modem from MF286R, expose both CDC-ECM and RNDIS network interfaces. They have a trait of ignoring the locally-administered MAC address configured on the interface both in CDC-ECM and RNDIS part, and this leads to dropping of incoming traffic by the host. However, the workaround was only present in CDC-ECM, and MF286R explicitly requires it in RNDIS mode. Re-use the workaround in rndis_host as well, to fix operation of MF286R module, some versions of which expose only the RNDIS interface. Do so by introducing new flag, RNDIS_DRIVER_DATA_DST_MAC_FIXUP, and testing for it in rndis_rx_fixup. This is required, as RNDIS uses frame batching, and all of the packets inside the batch need the fixup. This might introduce a performance penalty, because test is done for every returned Ethernet frame. Apply the workaround to both "flavors" of RNDIS interfaces, as older ZTE modems, like MF823 found in the wild, report the USB_CLASS_COMM class interfaces, while MF286R reports USB_CLASS_WIRELESS_CONTROLLER. Suggested-by: Bjørn Mork <bjorn@mork.no> Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14cdc_ether: export usbnet_cdc_zte_rx_fixupLech Perczak1-1/+2
Commit bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") introduces a workaround for certain ZTE modems reporting invalid MAC addresses over CDC-ECM. The same issue was present on their RNDIS interface,which was fixed in commit a5a18bdf7453 ("rndis_host: Set valid random MAC on buggy devices"). However, internal modem of ZTE MF286R router, on its RNDIS interface, also exhibits a second issue fixed already in CDC-ECM, of the device not respecting configured random MAC address. In order to share the fixup for this with rndis_host driver, export the workaround function, which will be re-used in the following commit in rndis_host. Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14EDAC/synopsys: Read the error count from the correct registerShubhrajyoti Datta1-5/+11
Currently, the error count is read wrongly from the status register. Read the count from the proper error count register (ERRCNT). [ bp: Massage. ] Fixes: b500b4a029d5 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com
2022-04-14virt: sevguest: Fix bool function returning negative valueHaowen Bai1-1/+1
The function enc_payload() is wrongly declared bool but returns an integer value. Correct it. [ bp: Massage commit message. ] Fixes: fce96cf04430 ("virt: Add SEV-SNP guest driver") Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/1649930657-10837-1-git-send-email-baihaowen@meizu.com
2022-04-14gpio: sim: fix setting and getting multiple linesBartosz Golaszewski1-2/+2
We need to take mask into account in the set/get_multiple() callbacks. Use bitmap_replace() instead of bitmap_copy(). Fixes: cb8c474e79be ("gpio: sim: new testing module") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-04-14drm/i915/migrate: Evict and restore the flatccs capable lmem objRamalingam C1-4/+160
When we are swapping out the local memory obj on flat-ccs capable platform, we need to capture the ccs data too along with main meory and we need to restore it when we are swapping in the content. When lmem object is swapped into a smem obj, smem obj will have the extra pages required to hold the ccs data corresponding to the lmem main memory. So main memory of lmem will be copied into the initial pages of the smem and then ccs data corresponding to the main memory will be copied to the subsequent pages of smem. ccs data is 1/256 of lmem size. Swapin happens exactly in reverse order. First main memory of lmem is restored from the smem's initial pages and the ccs data will be restored from the subsequent pages of smem. Extracting and restoring the CCS data is done through a special cmd called XY_CTRL_SURF_COPY_BLT v2: Fixing the ccs handling v3: Handle the ccs data at same loop as main memory [Thomas] v4: changes for emit_copy_ccs v5: handle non-flat-ccs scenario Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-10-ramalingam.c@intel.com
2022-04-14drm/i915/gem: Add extra pages in ttm_tt for ccs dataRamalingam C1-1/+29
On Xe-HP and later devices, dedicated compression control state (CCS) stored in local memory is used for each surface, to support the 3D and media compression formats. The memory required for the CCS of the entire local memory is 1/256 of the local memory size. So before the kernel boot, the required memory is reserved for the CCS data and a secure register will be programmed with the CCS base address So when an object is allocated in local memory, dont need to explicitly allocate the space for ccs data. But when the obj is evicted into the smem, to hold the compression related data along with the obj extra space is needed in smem. i.e obj_size + (obj_size/256). Hence when a smem pages are allocated for an obj with lmem placement possibility we create with the extra pages required for the ccs data for the obj size. v2: Used imperative wording [Thomas] v3: Inflate the pages only when obj's placement is lmem only v4: GEM_BUG_ON if the ttm->num_pages > obj page size [Thomas] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> cc: Christian Koenig <christian.koenig@amd.com> cc: Hellstrom Thomas <thomas.hellstrom@intel.com> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-9-ramalingam.c@intel.com
2022-04-14drm/i915/selftest_migrate: Check CCS meta data clearRamalingam C1-28/+222
Extend the live migrate selftest, to verify the ccs surface clearing during the Flat-CCS capable lmem obj clear. v2: Look at right places for ccs data [Thomas] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-8-ramalingam.c@intel.com
2022-04-14drm/i915/selftest_migrate: Consider the possible roundup of sizeRamalingam C1-0/+3
Consider the possible round up happened at obj size alignment to min_page_size during the obj allocation. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-7-ramalingam.c@intel.com
2022-04-14drm/i915/gt: Clear compress metadata for Flat-ccs objectsRamalingam C2-1/+152
Xe-HP and latest devices support Flat CCS which reserved a portion of the device memory to store compression metadata, during the clearing of device memory buffer object we also need to clear the associated CCS buffer. XY_CTRL_SURF_COPY_BLT is a BLT cmd used for reading and writing the ccs surface of a lmem memory. So on Flat-CCS capable platform we use XY_CTRL_SURF_COPY_BLT to clear the CCS meta data. v2: Fixed issues with platform naming [Lucas] v3: Rebased [Ram] Used the round_up funcs [Bob] v4: Fixed ccs blk calculation [Ram] Added Kdoc on flat-ccs. v5: GENMASK is used [Matt] mocs fix [Matt] Comments Fix [Matt] Flush address programming [Ram] v6: FLUSH_DW is fixed Few coding style fix v7: Adopting the XY_FAST_COLOR_BLT (Thomas] v8: XY_CTRL_SURF_COPY_BLT for ccs clearing. v9: emit_copy_ccs is used. v10: ctrl_surf cmds are filled in caller itself. [Thomas] only one ctrl surf cmd is used as size of lmem is <=8M [Thomas] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-6-ramalingam.c@intel.com
2022-04-14drm/i915/gt: Pass the -EINVAL when emit_pte doesn't update any PTERamalingam C1-1/+5
When emit_pte doesn't update any PTE with return value as 0, interpret it as -EINVAL. v2: Add missing goto [Thomas] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-5-ramalingam.c@intel.com
2022-04-14drm/i915/gt: Optimize the migration and clear loopRamalingam C1-17/+17
Move the static calculations out of the loops for copy and clear. v2: Fix the loss of proper error code on emit_pte Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-4-ramalingam.c@intel.com
2022-04-14drm/i915/gt: Use XY_FAST_COLOR_BLT to clear obj on graphics ver 12+Ramalingam C2-5/+43
Use faster XY_FAST_COLOR_BLT cmd on graphics version of 12 and more, for clearing (Zero out) the pages of the newly allocated object. XY_FAST_COLOR_BLT is faster than the older XY_COLOR_BLT. v2: Typo fix at title [Thomas] v3: XY_FAST_COLOR_BLT is used only for FLAT_CCS capable gen12+ Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-3-ramalingam.c@intel.com
2022-04-14drm/i915/gt: use engine instance directly for offsetRamalingam C1-7/+4
To make it uniform across copy and clear, use the engine offset directly to calculate the offset in the cmd forming for emit_clear. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-2-ramalingam.c@intel.com
2022-04-14memory: renesas-rpc-if: Simplify single/double data register accessGeert Uytterhoeven1-20/+8
For manual write and read, factor out the common access to the first data register by keeping track of the current data pointer. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/c3b2a8d1a69f1b1e8d1a460148406cfb83e52eb4.1649857740.git.geert+renesas@glider.be Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-14net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"Jeremy Linton1-2/+2
It turns out after digging deeper into this bug, that it was being triggered by GCC12 failing to call the bcmgenet_enable_dma() routine. Given that a gcc12 fix has been merged [1] and the genet driver now works properly when built with gcc12, this commit should be reverted. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160 https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57 Fixes: 8d3ea3d402db ("net: bcmgenet: Use stronger register read/writes to assure ordering") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14staging: ks7010: coding style fix: use tabs for indentAliya Rahmani1-1/+1
Added tabs for indent to fix the checkpatch error. Signed-off-by: Aliya Rahmani <aliyarahmani786@gmail.com> Link: https://lore.kernel.org/r/20220413204648.60358-1-aliyarahmani786@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: rtl8712: Remove unnecessary parenthesesAliya Rahmani1-1/+1
Remove redundant parentheses reported by checkpatch. Signed-off-by: Aliya Rahmani <aliyarahmani786@gmail.com> Link: https://lore.kernel.org/r/20220413182303.34807-1-aliyarahmani786@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: rtl8712: cmd: remove redundant space after castAliya Rahmani1-1/+1
Remove the unnecessary space immediately after a cast. Identified by checkpatch: CHECK: No space is necessary after a cast. Signed-off-by: Aliya Rahmani <aliyarahmani786@gmail.com> Link: https://lore.kernel.org/r/20220413113531.31224-1-aliyarahmani786@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: pkt_newalloc is not usedMartin Kaiser2-2/+0
pkg_newalloc in struct recv_buf is not used. Remove it. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413200742.276806-5-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: use ieee80211 helpers in mgt_dispatcherMartin Kaiser1-8/+9
Use structs and functions from ieee80211.h in mgt_dispatcher to parse the incoming frame. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413200742.276806-4-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: merge _mgt_dispatcher into mgt_dispatcherMartin Kaiser1-14/+8
All that the _mgt_dispatcher function does is to call a function from a function pointer. It's not worth having a separate function for this. Merge _mgt_dispatcher into mgt_dispatcher. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413200742.276806-3-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: use ieee80211 helper to read the qos tidMartin Kaiser2-3/+1
Replace the driver-specific GetPriority macro with ieee80211_get_tid, which does exactly the same thing. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413200742.276806-2-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: remove unused timer functionsMartin Kaiser2-14/+0
rtw_get_passing_time_ms and rtw_systime_to_ms are not used any more. Remove them. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413193654.258507-9-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: remove the bInSuspend loopMartin Kaiser1-4/+0
Remove the loop in rtw_pwr_wakeup that waits while the system is suspended. pwrpriv->bInSuspend is set in rtw_suspend and cleared in rtw_resume. These functions are the .suspend and .resume functions of the struct usb_driver for r8188eu. A usb_driver's suspend and resume functions are called when the entire system goes into suspend or runtime suspend. All of the code paths for rtw_pwr_wakeup start at ioctl handlers. We can remove the loop that checks bInSuspend. It's not possible to call an ioctl while the entire system is suspended. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413193654.258507-8-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: clean up the code to set ips_deny_timeMartin Kaiser4-16/+5
Clean up the code in rtw_pwr_wakeup that sets pwrpriv->ips_deny_time. Make ips_deny_time an unsigned long, this type is used by the kernel functions that process jiffies. Remove the temporary variable ips_deffer_ms and use RTW_PWR_STATE_CHK_INTERVAL directly. There's no need to set ips_deny_time twice, it's sufficient to set it at the end of rtw_pwr_wakeup. Use time_before to check if ips_deny_time should be updated. We can now remove rtw_ms_to_systime, this function is not used any more. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413193654.258507-7-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: use kernel functions for timeout handlingMartin Kaiser1-3/+3
Use the kernel functions to set a timeout and to check if it's expired. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413193654.258507-6-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: summarize two if statementsMartin Kaiser1-5/+4
Summarize two if statements in rtw_pwr_wakeup and place the constants on the right side of the comparison. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413193654.258507-5-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: simplify the ps_processing checkMartin Kaiser1-4/+2
It's sufficient to check pwrpriv->ps_processing as part of the while-loop. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413193654.258507-4-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: make return values consistentMartin Kaiser1-4/+2
rtw_pwr_wakeup should return _SUCCESS or _FAIL. Replace false with _FAIL in one place and reformat the if-statement. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413193654.258507-3-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14staging: r8188eu: simplify delay conditions in rtw_pwr_wakeupMartin Kaiser1-6/+2
Simplify the conditions for a loop in rtw_pwr_wakeup that waits while the system is suspended. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220413193654.258507-2-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14net: dsa: felix: fix tagging protocol changes with multiple CPU portsVladimir Oltean1-0/+23
When the device tree has 2 CPU ports defined, a single one is active (has any dp->cpu_dp pointers point to it). Yet the second one is still a CPU port, and DSA still calls ->change_tag_protocol on it. On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the active CPU port and port 5 is inactive. After the following commands: # Initial setting cat /sys/class/net/eno2/dsa/tagging ocelot echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo ocelot > /sys/class/net/eno2/dsa/tagging traffic is now broken, because the driver has moved the NPI port from port 4 to port 5, unbeknown to DSA. The problem can be avoided by detecting that the second CPU port is unused, and not doing anything for it. Further rework will be needed when proper support for multiple CPU ports is added. Treat this as a bug and prepare current kernels to work in single-CPU mode with multiple-CPU DT blobs. Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220412172209.2531865-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14interconnect: qcom: sdx55: Drop IP0 interconnectsStephen Boyd1-21/+0
Similar to the sc7180 commit, let's drop the IP0 interconnects here because the IP0 resource is also used in the clk-rpmh driver on sdx55. It's bad to have the clk framework and interconnect framework control the same RPMh resource without any coordination. The rpmh driver in the kernel doesn't aggregate resources between clients either, so leaving control to clk-rpmh avoids any issues with unused interconnects turning off IP0 behind the back of the clk framework. Cc: Alex Elder <elder@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Mike Tipton <quic_mdtipton@quicinc.com> Fixes: b2150cab9a97 ("clk: qcom: rpmh: add support for SDX55 rpmh IPA clock") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220412220033.1273607-3-swboyd@chromium.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2022-04-14interconnect: qcom: sc7180: Drop IP0 interconnectsStephen Boyd1-21/+0
The IPA BCM resource ("IP0") on sc7180 was moved to the clk-rpmh driver in commit bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") and modeled as a clk, but this interconnect driver still had it modeled as an interconnect. This was mostly OK because nobody used the interconnect definition, until the interconnect framework started dropping bandwidth requests on interconnects that aren't used via the sync_state callback in commit 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state"). Once that patch was applied the IP0 resource was going to be controlled from two places, the clk framework and the interconnect framework. Even then, things were probably going to be OK, because commit b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate") was needed to actually drop bandwidth requests on unused interconnects, of which the IPA was one of the interconnect that wasn't getting dropped to zero. Combining the three commits together leads to bad behavior where the interconnect framework is disabling the IP0 resource because it has no users while the clk framework thinks the IP0 resource is on because the only user, the IPA driver, has turned it on via clk_prepare_enable(). Depending on when sync_state is called, we can get into a situation like below: IPA driver probes IPA driver gets notified modem started runtime PM get() IPA clk enabled -> IP0 resource is ON sync_state runs interconnect zeroes out the IP0 resource -> IP0 resource is off IPA driver tries to access a register and blows up The crash is an unclocked access that manifest as an SError. SError Interrupt on CPU0, code 0xbe000011 -- SError CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x4c/0x80 lr : mutex_lock+0x30/0x80 sp : ffffffc00da9b9c0 x29: ffffffc00da9b9c0 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffc00da9bc90 x25: ffffff80c2024010 x24: ffffff80c2024000 x23: ffffff8083100000 x22: ffffff80831000d0 x21: ffffff80831000a8 x20: ffffff80831000a8 x19: ffffff8083100070 x18: 00000000ffff0a00 x17: 000000002f7254f1 x16: 0000000000000100 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 000000000001f0b8 x10: ffffffc00931f0b8 x9 : 0000000000000000 x8 : 0000000000000000 x7 : fefefefefeff2f60 x6 : 0000808080808080 x5 : 0000000000000000 x4 : 8080808080800000 x3 : ffffff80d2d4ee28 x2 : ffffff808c1d6e40 x1 : 0000000000000000 x0 : ffffff8083100070 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Call trace: dump_backtrace+0xf4/0x114 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 panic+0x150/0x38c nmi_panic+0x88/0xa0 arm64_serror_panic+0x74/0x80 do_serror+0x0/0x80 do_serror+0x58/0x80 el1h_64_error_handler+0x34/0x4c el1h_64_error+0x78/0x7c mutex_lock+0x4c/0x80 __gsi_channel_start+0x50/0x17c gsi_channel_start+0x54/0x90 ipa_endpoint_enable_one+0x34/0xc0 ipa_open+0x4c/0x120 Remove all IP0 resource management from the interconnect driver so that clk-rpmh is the sole owner. This fixes the issue by preventing the interconnect driver from overwriting the IP0 resource data that the clk-rpmh driver wrote. Cc: Alex Elder <elder@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Mike Tipton <quic_mdtipton@quicinc.com> Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate") Fixes: bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Alex Elder <elder@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220412220033.1273607-2-swboyd@chromium.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2022-04-14tun: annotate access to queue->trans_startAntoine Tenart1-1/+1
Commit 5337824f4dc4 ("net: annotate accesses to queue->trans_start") introduced a new helper, txq_trans_cond_update, to update queue->trans_start using WRITE_ONCE. One snippet in drivers/net/tun.c was missed, as it was introduced roughly at the same time. Fixes: 5337824f4dc4 ("net: annotate accesses to queue->trans_start") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220412135852.466386-1-atenart@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14phy: ti: Add missing pm_runtime_disable() in serdes_am654_probeMiaoqian Lin1-1/+1
The pm_runtime_enable() will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for serdes_am654_probe(). Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-14phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probeMiaoqian Lin1-1/+2
The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to undo pm_runtime_use_autosuspend() In the PM Runtime docs: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. We should do this in error handling. Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-14Merge tag 'drm-msm-fixes-2022-04-13' of https://gitlab.freedesktop.org/drm/msm into drm-fixesDave Airlie11-46/+107
Some msm fixes for v5.18. kzalloc return checks, display fix, misc locking and scheduler bug, iommu present removal. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvuTwx09MKwK68KWXqi4o7LxDGMUz1=Z7xOS+i=OV84Ug@mail.gmail.com
2022-04-13drm/amd/display: remove dtbclk_ss compensation for dcn316Charlene Liu3-4/+4
[why] dcn316's dtbclk is from non_ss clock source. no compensation required here. Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-13drm/amdgpu: Enable gfxoff quirk on MacBook ProTomasz Moń1-0/+2
Enabling gfxoff quirk results in perfectly usable graphical user interface on MacBook Pro (15-inch, 2019) with Radeon Pro Vega 20 4 GB. Without the quirk, X server is completely unusable as every few seconds there is gpu reset due to ring gfx timeout. Signed-off-by: Tomasz Moń <desowin@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-13drm/amdgpu: Ensure HDA function is suspended before ASIC resetKai-Heng Feng1-6/+12
DP/HDMI audio on AMD PRO VII stops working after S3: [ 149.450391] amdgpu 0000:63:00.0: amdgpu: MODE1 reset [ 149.450395] amdgpu 0000:63:00.0: amdgpu: GPU mode1 reset [ 149.450494] amdgpu 0000:63:00.0: amdgpu: GPU psp mode1 reset [ 149.983693] snd_hda_intel 0000:63:00.1: refused to change power state from D0 to D3hot [ 150.003439] amdgpu 0000:63:00.0: refused to change power state from D0 to D3hot ... [ 155.432975] snd_hda_intel 0000:63:00.1: CORB reset timeout#2, CORBRP = 65535 The offending commit is daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)"). Commit 34452ac3038a7 ("drm/amdgpu: don't use BACO for reset in S3 ") doesn't help, so the issue is something different. Assuming that to make HDA resume to D0 fully realized, it needs to be successfully put to D3 first. And this guesswork proves working, by moving amdgpu_asic_reset() to noirq callback, so it's called after HDA function is in D3. Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-13drm/amdgpu: fix VCN 3.1.2 firmware nameAlex Deucher1-1/+1
Drop the trailing vcn. Fixes: afc2f276057ea1 ("drm/amdgpu/vcn: add vcn support for vcn 3.1.2") Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-13drm/amd/display: don't ignore alpha property on pre-multiplied modeMelissa Wen2-10/+18
"Pre-multiplied" is the default pixel blend mode for KMS/DRM, as documented in supported_modes of drm_plane_create_blend_mode_property(): https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_blend.c In this mode, both 'pixel alpha' and 'plane alpha' participate in the calculation, as described by the pixel blend mode formula in KMS/DRM documentation: out.rgb = plane_alpha * fg.rgb + (1 - (plane_alpha * fg.alpha)) * bg.rgb Considering the blend config mechanisms we have in the driver so far, the alpha mode that better fits this blend mode is the _PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN, where the value for global_gain is the plane alpha (global_alpha). With this change, alpha property stops to be ignored. It also addresses Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1734 v2: * keep the 8-bit value for global_alpha_value (Nicholas) * correct the logical ordering for combined global gain (Nicholas) * apply to dcn10 too (Nicholas) Signed-off-by: Melissa Wen <mwen@igalia.com> Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Simon Ser <contact@emersion.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-04-14Merge tag 'drm-intel-next-2022-04-13-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-nextDave Airlie143-3657/+4282
drm/i915 feature pull for v5.19: Features and functionality: - Add support for new Tile 4 format on DG2 (Stan) - Add support for new CCS clear color compression on DG2 (Mika, Juha-Pekka) - Add support for new render and media compression formats on DG2 (Matt) - Support multiple eDP and LVDS native mode refresh rates (Ville) - Support static DRRS (Ville) - ATS-M platform info (Matt) - RPL-S PCI IDs (Tejas) - Extend DP HDR support to HSW+ (Uma) - Bump ADL-P DMC version to v2.16 (Madhumitha) - Let users disable PSR2 while enabling PSR1 (José) Refactoring and cleanups: - Massive DRRS and panel fixed mode refactoring and cleanups (Ville) - Power well refactoring and cleanup (Imre) - Clean up and refactor crtc readout and compute config (Ville) - Use kernel string helpers (Lucas) - Refactor gmbus pin lookups and allocation (Jani) - PCH display cleanups (Ville) - DPLL and DPLL manager refactoring (Ville) - Include and header refactoring (Jani, Tvrtko) - DMC abstractions (Jani) - Non-x86 build refactoring (Casey) - VBT parsing refactoring (Ville) - Bigjoiner refactoring (Ville) - Optimize plane, pfit, scaler, etc. programming using unlocked writes (Ville) - Split several register writes in commit to noarm+arm pairs (Ville) - Clean up SAGV handling (Ville) - Clean up bandwidth and ddb allocation (Ville) - FBC cleanups (Ville) Fixes: - Fix native HDMI and DP HDMI DFP clock limits on deep color/4:2:0 (Ville) - Fix DMC firmware platform check (Lucas) - Fix cursor coordinates on bigjoiner secondary (Ville) - Fix MSO vs. bigjoiner timing confusion (Ville) - Fix ADL-P eDP voltage swing (José) - Fix VRR capability property update (Manasi) - Log DG2 SNPS PHY calibration errors (Matt, Lucas) - Fix PCODE request status checks (Stan) - Fix uncore unclaimed access warnings (Lucas) - Fix VBT new max TMDS clock parsing (Shawn) - Fix ADL-P non-existent underrun recovery (Swathi Dhanavanthri) - Fix ADL-N stepping info (Tejas) - Fix DPT mapping flags to contiguous (Stan) - Fix DG2 max display bandwidth (Vinod) - Fix DP low voltage SKU checks (Ankit) - Fix RPL-S VT-d translation enable via quirk (Tejas) - Fixes to PSR2 (José) - Fix PIPE_MBUS_DBOX_CTL programming (José) - Fix LTTPR capability read/check on DP 1.2 (Imre) - Fix ADL-P register corruption after DDI clock enabling (Imre) - Fix ADL-P MBUS DBOX BW and B credits (Caz) Merges: - Backmerge drm-next (Rodrigo, Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/874k2xgewe.fsf@intel.com
2022-04-14PM / devfreq: rk3399_dmc: Avoid static (reused) profileBrian Norris1-9/+9
This static struct can get reused if the device gets removed/reprobed, and that causes use-after-free in its ->freq_table. Let's just move the struct to our dynamic allocation. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-04-14PM / devfreq: rk3399_dmc: Use devm_pm_opp_of_add_table()Brian Norris1-11/+3
This simplifies error-cleanup and remove(). Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-04-14PM / devfreq: rk3399_dmc: Disable edev on remove()Brian Norris1-0/+2
Otherwise we hit an unablanced enable-count when unbinding the DFI device: [ 1279.659119] ------------[ cut here ]------------ [ 1279.659179] WARNING: CPU: 2 PID: 5638 at drivers/devfreq/devfreq-event.c:360 devfreq_event_remove_edev+0x84/0x8c ... [ 1279.659352] Hardware name: Google Kevin (DT) [ 1279.659363] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 1279.659371] pc : devfreq_event_remove_edev+0x84/0x8c [ 1279.659380] lr : devm_devfreq_event_release+0x1c/0x28 ... [ 1279.659571] Call trace: [ 1279.659582] devfreq_event_remove_edev+0x84/0x8c [ 1279.659590] devm_devfreq_event_release+0x1c/0x28 [ 1279.659602] release_nodes+0x1cc/0x244 [ 1279.659611] devres_release_all+0x44/0x60 [ 1279.659621] device_release_driver_internal+0x11c/0x1ac [ 1279.659629] device_driver_detach+0x20/0x2c [ 1279.659641] unbind_store+0x7c/0xb0 [ 1279.659650] drv_attr_store+0x2c/0x40 [ 1279.659663] sysfs_kf_write+0x44/0x58 [ 1279.659672] kernfs_fop_write_iter+0xf4/0x190 [ 1279.659684] vfs_write+0x2b0/0x2e4 [ 1279.659693] ksys_write+0x80/0xec [ 1279.659701] __arm64_sys_write+0x24/0x30 [ 1279.659714] el0_svc_common+0xf0/0x1d8 [ 1279.659724] do_el0_svc_compat+0x28/0x3c [ 1279.659738] el0_svc_compat+0x10/0x1c [ 1279.659746] el0_sync_compat_handler+0xa8/0xcc [ 1279.659758] el0_sync_compat+0x188/0x1c0 [ 1279.659768] ---[ end trace cec200e5094155b4 ]--- Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.