aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-04-01net: micrel: fix KS8851_MLL KconfigRandy Dunlap1-0/+1
KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since 'select' does not follow any dependency chains. Fixes kconfig warning and build errors: WARNING: unmet direct dependencies detected for MICREL_PHY Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y] ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info': micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index' ld: drivers/net/phy/micrel.o: in function `lan8814_probe': micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-01mctp i2c: correct mctp_i2c_header_create resultMatt Johnston1-1/+1
header_ops.create should return the length of the header, instead mctp_i2c_head_create() returned 0. This didn't cause any problem because the MCTP stack accepted 0 as success. Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver") Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-01ice: Fix broken IFF_ALLMULTI handlingIvan Vecera3-38/+121
Handling of all-multicast flag and associated multicast promiscuous mode is broken in ice driver. When an user switches allmulticast flag on or off the driver checks whether any VLANs are configured over the interface (except default VLAN 0). If any extra VLANs are registered it enables multicast promiscuous mode for all these VLANs (including default VLAN 0) using ICE_SW_LKUP_PROMISC_VLAN look-up type. In this situation all multicast packets tagged with known VLAN ID or untagged are received and multicast packets tagged with unknown VLAN ID ignored. If no extra VLANs are registered (so only VLAN 0 exists) it enables multicast promiscuous mode for VLAN 0 and uses ICE_SW_LKUP_PROMISC look-up type. In this situation any multicast packets including tagged ones are received. The driver handles IFF_ALLMULTI in ice_vsi_sync_fltr() this way: ice_vsi_sync_fltr() { ... if (changed_flags & IFF_ALLMULTI) { if (netdev->flags & IFF_ALLMULTI) { if (vsi->num_vlans > 1) ice_set_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS); else ice_set_promisc(..., ICE_MCAST_PROMISC_BITS); } else { if (vsi->num_vlans > 1) ice_clear_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS); else ice_clear_promisc(..., ICE_MCAST_PROMISC_BITS); } } ... } The code above depends on value vsi->num_vlan that specifies number of VLANs configured over the interface (including VLAN 0) and this is problem because that value is modified in NDO callbacks ice_vlan_rx_add_vid() and ice_vlan_rx_kill_vid(). Scenario 1: 1. ip link set ens7f0 allmulticast on 2. ip link add vlan10 link ens7f0 type vlan id 10 3. ip link set ens7f0 allmulticast off 4. ip link set ens7f0 allmulticast on [1] In this scenario IFF_ALLMULTI is enabled and the driver calls ice_set_promisc(..., ICE_MCAST_PROMISC_BITS) that installs multicast promisc rule with non-VLAN look-up type. [2] Then VLAN with ID 10 is added and vsi->num_vlan incremented to 2 [3] Command switches IFF_ALLMULTI off and the driver calls ice_clear_promisc(..., ICE_MCAST_VLAN_PROMISC_BITS) but this call is effectively NOP because it looks for multicast promisc rules for VLAN 0 and VLAN 10 with VLAN look-up type but no such rules exist. So the all-multicast remains enabled silently in hardware. [4] Command tries to switch IFF_ALLMULTI on and the driver calls ice_clear_promisc(..., ICE_MCAST_PROMISC_BITS) but this call fails (-EEXIST) because non-VLAN multicast promisc rule already exists. Scenario 2: 1. ip link add vlan10 link ens7f0 type vlan id 10 2. ip link set ens7f0 allmulticast on 3. ip link add vlan20 link ens7f0 type vlan id 20 4. ip link del vlan10 ; ip link del vlan20 5. ip link set ens7f0 allmulticast off [1] VLAN with ID 10 is added and vsi->num_vlan==2 [2] Command switches IFF_ALLMULTI on and driver installs multicast promisc rules with VLAN look-up type for VLAN 0 and 10 [3] VLAN with ID 20 is added and vsi->num_vlan==3 but no multicast promisc rules is added for this new VLAN so the interface does not receive MC packets from VLAN 20 [4] Both VLANs are removed but multicast rule for VLAN 10 remains installed so interface receives multicast packets from VLAN 10 [5] Command switches IFF_ALLMULTI off and because vsi->num_vlan is 1 the driver tries to remove multicast promisc rule for VLAN 0 with non-VLAN look-up that does not exist. All-multicast looks disabled from user point of view but it is partially enabled in HW (interface receives all multicast packets either untagged or tagged with VLAN ID 10) To resolve these issues the patch introduces these changes: 1. Adds handling for IFF_ALLMULTI to ice_vlan_rx_add_vid() and ice_vlan_rx_kill_vid() callbacks. So when VLAN is added/removed and IFF_ALLMULTI is enabled an appropriate multicast promisc rule for that VLAN ID is added/removed. 2. In ice_vlan_rx_add_vid() when first VLAN besides VLAN 0 is added so (vsi->num_vlan == 2) and IFF_ALLMULTI is enabled then look-up type for existing multicast promisc rule for VLAN 0 is updated to ICE_MCAST_VLAN_PROMISC_BITS. 3. In ice_vlan_rx_kill_vid() when last VLAN besides VLAN 0 is removed so (vsi->num_vlan == 1) and IFF_ALLMULTI is enabled then look-up type for existing multicast promisc rule for VLAN 0 is updated to ICE_MCAST_PROMISC_BITS. 4. Both ice_vlan_rx_{add,kill}_vid() have to run under ICE_CFG_BUSY bit protection to avoid races with ice_vsi_sync_fltr() that runs in ice_service_task() context. 5. Bit ICE_VSI_VLAN_FLTR_CHANGED is use-less and can be removed. 6. Error messages added to ice_fltr_*_vsi_promisc() helper functions to avoid them in their callers 7. Small improvements to increase readability Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Alice Michael <alice.michael@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-01ice: Fix MAC address settingIvan Vecera1-2/+5
Commit 2ccc1c1ccc671b ("ice: Remove excess error variables") merged the usage of 'status' and 'err' variables into single one in function ice_set_mac_address(). Unfortunately this causes a regression when call of ice_fltr_add_mac() returns -EEXIST because this return value does not indicate an error in this case but value of 'err' remains to be -EEXIST till the end of the function and is returned to caller. Prior mentioned commit this does not happen because return value of ice_fltr_add_mac() was stored to 'status' variable first and if it was -EEXIST then 'err' remains to be zero. Fix the problem by reset 'err' to zero when ice_fltr_add_mac() returns -EEXIST. Fixes: 2ccc1c1ccc671b ("ice: Remove excess error variables") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Alice Michael <alice.michael@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-01ice: Clear default forwarding VSI during VSI releaseIvan Vecera1-0/+2
VSI is set as default forwarding one when promisc mode is set for PF interface, when PF is switched to switchdev mode or when VF driver asks to enable allmulticast or promisc mode for the VF interface (when vf-true-promisc-support priv flag is off). The third case is buggy because in that case VSI associated with VF remains as default one after VF removal. Reproducer: 1. Create VF echo 1 > sys/class/net/ens7f0/device/sriov_numvfs 2. Enable allmulticast or promisc mode on VF ip link set ens7f0v0 allmulticast on ip link set ens7f0v0 promisc on 3. Delete VF echo 0 > sys/class/net/ens7f0/device/sriov_numvfs 4. Try to enable promisc mode on PF ip link set ens7f0 promisc on Although it looks that promisc mode on PF is enabled the opposite is true because ice_vsi_sync_fltr() responsible for IFF_PROMISC handling first checks if any other VSI is set as default forwarding one and if so the function does not do anything. At this point it is not possible to enable promisc mode on PF without re-probe device. To resolve the issue this patch clear default forwarding VSI during ice_vsi_release() when the VSI to be released is the default one. Fixes: 01b5e89aab49 ("ice: Add VF promiscuous support") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alice Michael <alice.michael@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-01vrf: fix packet sniffing for traffic originating from ip tunnelsEyal Birger1-4/+11
in commit 048939088220 ("vrf: add mac header for tunneled packets when sniffer is attached") an Ethernet header was cooked for traffic originating from tunnel devices. However, the header is added based on whether the mac_header is unset and ignores cases where the device doesn't expose a mac header to upper layers, such as in ip tunnels like ipip and gre. Traffic originating from such devices still appears garbled when capturing on the vrf device. Fix by observing whether the original device exposes a header to upper layers, similar to the logic done in af_packet. In addition, skb->mac_len needs to be adjusted after adding the Ethernet header for the skb_push/pull() surrounding dev_queue_xmit_nit() to work on these packets. Fixes: 048939088220 ("vrf: add mac header for tunneled packets when sniffer is attached") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-01net: sfc: add missing xdp queue reinitializationTaehee Yoo1-65/+81
After rx/tx ring buffer size is changed, kernel panic occurs when it acts XDP_TX or XDP_REDIRECT. When tx/rx ring buffer size is changed(ethtool -G), sfc driver reallocates and reinitializes rx and tx queues and their buffer (tx_queue->buffer). But it misses reinitializing xdp queues(efx->xdp_tx_queues). So, while it is acting XDP_TX or XDP_REDIRECT, it uses the uninitialized tx_queue->buffer. A new function efx_set_xdp_channels() is separated from efx_set_channels() to handle only xdp queues. Splat looks like: BUG: kernel NULL pointer dereference, address: 000000000000002a #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#4] PREEMPT SMP NOPTI RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.17.0+ #55 e8beeee8289528f11357029357cf Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 RSP: 0018:ffff92f121e45c60 EFLAGS: 00010297 RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] RAX: 0000000000000040 RBX: ffff92ea506895c0 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001139b10ce RDI: ffff92ea506895c0 RBP: ffffffffc0358a80 R08: 00000001139b110d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001139b10ce R15: ffff92ea506895c0 FS: 0000000000000000(0000) GS:ffff92f121ec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 CR2: 000000000000002a CR3: 00000003e6810004 CR4: 00000000007706e0 RSP: 0018:ffff92f121e85c60 EFLAGS: 00010297 PKRU: 55555554 RAX: 0000000000000040 RBX: ffff92ea50689700 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001145a90ce RDI: ffff92ea50689700 RBP: ffffffffc0358a80 R08: 00000001145a910d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001145a90ce R15: ffff92ea50689700 FS: 0000000000000000(0000) GS:ffff92f121e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000002a CR3: 00000003e6810005 CR4: 00000000007706e0 PKRU: 55555554 Call Trace: <IRQ> efx_xdp_tx_buffers+0x12b/0x3d0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] __efx_rx_packet+0x5c3/0x930 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_rx_packet+0x28c/0x2e0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_ef10_ev_process+0x5f8/0xf40 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] ? enqueue_task_fair+0x95/0x550 efx_poll+0xc4/0x360 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-01ath9k: Properly clear TX status area before reporting to mac80211Toke Høiland-Jørgensen1-3/+2
The ath9k driver was not properly clearing the status area in the ieee80211_tx_info struct before reporting TX status to mac80211. Instead, it was manually filling in fields, which meant that fields introduced later were left as-is. Conveniently, mac80211 actually provides a helper to zero out the status area, so use that to make sure we zero everything. The last commit touching the driver function writing the status information seems to have actually been fixing an issue that was also caused by the area being uninitialised; but it only added clearing of a single field instead of the whole struct. That is now redundant, though, so revert that commit and use it as a convenient Fixes tag. Fixes: cc591d77aba1 ("ath9k: Make sure to zero status.tx_time before reporting TX status") Reported-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220330164409.16645-1-toke@toke.dk
2022-03-31Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"José Expósito1-6/+0
This reverts commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40. The touchpad present in the Dell Precision 7550 and 7750 laptops reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However, the device is not a clickpad, it is a touchpad with physical buttons. In order to fix this issue, a quirk for the device was introduced in libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property: [Precision 7x50 Touchpad] MatchBus=i2c MatchUdevType=touchpad MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50* AttrInputPropDisable=INPUT_PROP_BUTTONPAD However, because of the change introduced in 37ef4c19b4 ("Input: clear BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped anymore breaking the device right click button and making impossible to workaround it in user space. In order to avoid breakage on other present or future devices, revert the patch causing the issue. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-03-31drm/amdkfd: Create file descriptor after client is added to smi_clients listLee Jones1-9/+15
This ensures userspace cannot prematurely clean-up the client before it is fully initialised which has been proven to cause issues in the past. Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdgpu: Sync up header and implementation to use the same parameter namesMa Jun1-2/+2
Sync up header and implementation to use the same parameter names in function amdgpu_ring_init. ring_size -> max_dw, prio -> hw_prio Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdgpu: fix incorrect GCR_GENERAL_CNTL addressRuili Ji1-3/+3
gfx10.3.3/gfx10.3.6/gfx10.3.7 shall use 0x1580 address for GCR_GENERAL_CNTL Acked-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Ruili Ji <ruiliji2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdgpu: Fix unique_id references for Sienna CichlidKent Russell2-12/+4
Since unique_id is only supported in PMFW 0x3A5300 and higher, we will only be able to use it inside Smu_Metrics_V3_t, which requires PMFW 0x3A4900 and higher. Remove the unique_id/serial_number references from the v1 and v2 tables to avoid any confusion, and return 0 if metrics_v1 or metrics_v2 are used to try to get the unique_id/serial_number. Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: remove DC_FP_* wrapper from dml folderMelissa Wen4-18/+10
FPU documentation states that developers must not use DC_FP_START/END inside dml files, but use this macro to wrap calls to FPU functions in dc folder (outside dml folder). Therefore, this patch removes DC_FP_* wrappers from dml folder and wraps calls for these FPU operations outside dml, as required. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: detach fpu operations from dcn10_validate_bandwidth in calcsMelissa Wen3-5/+16
dcn10_validate_bandwidth is only used on dcn10 files, but is declared in dcn_calcs files. Rename dcn10_* to dcn_* in calcs, remove DC_FP_* wrapper inside DML folder and create an specific dcn10_validate_bandwidth in dcn10_resources that calls dcn_validate_bandwidth and properly wraps that FPU function with DC_FP_* macro. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdgpu: Add unique_id support for sienna cichlidKent Russell3-2/+45
This is being added to SMU Metrics, so add the required tie-ins in the kernel. Also create the corresponding unique_id sysfs file. v2: Add FW version check, remove SMU mutex v3: Fix style warning v4: Add MP1 IP_VERSION check to FW version check Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdgpu: Use metrics data function to get unique_id for AldebaranKent Russell1-7/+9
This is abstracted well enough in the get_metrics_data function, so use the function Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdgpu: Add UNIQUE_ID to MetricsMember_tKent Russell1-0/+2
This will allow us to use the generic *_get_metrics_data functions for ASICs that support unique_id Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdgpu: Use switch case for unique_idKent Russell1-4/+9
To ease readability, use switch to set unique_id as supported for the supported IP_VERSIONs, and set it to unsupported by default for all other ASICs. This makes it easier to add IP_VERSIONs later on, and makes it obvious that it is not supported by default, instead of the current logic that assumes that it is supported unless it is not one of the specified IP_VERSIONs. v2: Rebase onto previous IP_VERSION change Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Kevin Wang <KevinYang.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdkfd: Use atomic64_t type for pdd->tlb_seqPhilip Yang2-4/+8
To support multi-thread update page table. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdgpu: fix incorrect size printing in error msgChristian König1-1/+1
That are bytes not pages. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdgpu: fix some kerneldoc in the VM code v2Christian König2-2/+2
Fix two incorrect kerneldocs for the recent VM code changes. v2: fix one more typo Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31amd/display: set backlight only if requiredShirish S2-3/+10
[Why] comparing pwm bl values (coverted) with user brightness(converted) levels in commit_tail leads to continuous setting of backlight via dmub as they don't to match. This leads overdrive in queuing of commands to DMCU that sometimes lead to depending on load on DMCU fw: "[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3" [How] Store last successfully set backlight value and compare with it instead of pwm reads which is not what we should compare with. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: DCN3.1: don't mark as kernel-docRandy Dunlap1-2/+1
There is no need for this one static function to be marked as kernel-doc notation. Avoid this doc build warning: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Enable CRTC Fixes: 110d3968fe95 ("drm/amd/display: Add DCN3.1 OPTC") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Fix pointer dereferenced before checkingHaowen Bai1-1/+1
The value actual_pix_clk_100Hz is dereferencing pointer pix_clk_params before pix_clk_params is being null checked. Fix this by assigning pix_clk_params->requested_pix_clk_100hz to actual_pix_clk_100Hz only if pix_clk_params is not NULL, otherwise just NULL. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdgpu: Add tlb_cb for unlocked updatePhilip Yang1-1/+1
Flush TLB needs wait for GPU update fence done. MMU notify callback to unmap range from GPUs uses unlocked GPU page table update, so add tlb_cb to unlocked update fence to increase vm->tlb_seq. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amdgpu: Correct unlocked update fence handlingPhilip Yang1-1/+1
To fix two issues with unlocked update fence: 1. vm->last_unlocked store the latest fence without taking refcount. 2. amdgpu_vm_bo_update_mapping returns old fence, not the latest fence. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Fix pointer dereferenced before checkingHaowen Bai1-1/+1
The pointer edid_buf is dereferencing pointer edid before edid is being null checked. Fix this by assigning edid->raw_edid to edid_buf only if edid is not NULL, otherwise just NULL. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Fix allocate_mst_payload assert on resumeRoman Li1-1/+2
[Why] On resume we do link detection for all non-MST connectors. MST is handled separately. However the condition for telling if connector is on mst branch is not enough for mst hub case. Link detection for mst branch link leads to mst topology reset. That causes assert in dc_link_allocate_mst_payload() [How] Use link type as indicator for mst link. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: 3.2.179Aric Cyr1-1/+1
- [FW Promotion] Release 0.0.110.0 - Revert FEC check in validation - Update LTTPR UHBR link rate support struct - Add support for USBC connector - Add work around for AUX failure on wake - Clear optc false state when disable otg - Enable power gating before init_pipes - Remove redundant dsc power gating from init_hw - Power down hardware if timer not trigger - Correct Slice reset calculation - Enable 3-plane MPO for DCN31 - Set fec register init value - Remove SW w/a for HDCP 1.4 1A-07 failure based on ECO fix - Create underflow interrupt IRQ type Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: [FW Promotion] Release 0.0.110.0Anthony Koo1-86/+4
- Revert save/restore PANEL_PWRSEQ_REF_DIV2 and other psr phy optimizations Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Revert FEC check in validationMartin Leung1-4/+0
why and how: causes failure on install on certain machines Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Update LTTPR UHBR link rate support structMichael Strauss1-1/+1
[WHY] Update field order to match DP2.0 spec SCR Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Add support for USBC connectorSamson Tam4-3/+12
[Why] Add support for CONNECTOR_ID_USBC Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Add work around for AUX failure on wake.Jimmy Kizito2-0/+60
[Why] When waking from low-power states, a DP sink may remain unresponsive to AUX transactions. [How] Try to toggle DPCD SET_POWER register repeatedly (up to a maximum timeout value) until DP sink becomes responsive. Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Clear optc false state when disable otgCharlene Liu2-8/+11
[why] when disable optc, need to clear the underflow status as well. Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Enable power gating before init_pipesRoman Li3-6/+9
[Why] In init_hw() we call init_pipes() before enabling power gating. init_pipes() tries to power gate dsc but it may fail because required force-ons are not released yet. As a result with dsc config the following errors observed on resume: "REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control" [How] Move enable_power_gating_plane() before init_pipes() in init_hw() Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Remove redundant dsc power gating from init_hwRoman Li1-7/+0
[Why] DSC Power down code has been moved from dcn31_init_hw into init_pipes() Need to remove it from dcn10_init_hw() as well to avoid duplicated action on dcn1.x/2.x [How] Remove DSC power down code from dcn10_init_hw() Fixes: 8fa6f4c5715c ("drm/amd/display: fixed the DSC power off sequence during Driver PnP") Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Power down hardware if timer not triggerPaul Hsieh1-1/+25
[WHY] In headless systems, if SetMode/Power down timer is not called, hardware will not be powered down causing HW/SW discrepancies. Powering down hardware on SetPowerState to D3 will ensure SW/HW state is accurate. [HOW] If PowerDownThread timer is not trigger but OS call SetPowerState to D3, power down hardware. Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Correct Slice reset calculationChris Park1-2/+2
[Why] Once DSC slice cannot fit pixel clock, we incorrectly reset min slices to 0 and allow max slice to operate, even when max slice itself cannot fit the pixel clock properly. [How] Change the sequence such that we correctly determine DSC is not possible when both min slices and max slices cannot fit pixel clock per slice. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Chris Park <Chris.Park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Enable 3-plane MPO for DCN31Krunoslav Kovac1-3/+3
[WHY&HOW] It can be enabled by users, but proper way is to report max_slave_planes in DC caps for each ASIC. Some structures use hardcoded max_plane=2, this is also addressed here. Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Set fec register init valueJingwen Zhu3-15/+21
[Why] We don't include this eDP FEC init on fastboot. [How] Set the fec to init value when stopping driver &get the fec register value to check should enable FEC. Co-authored-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Remove SW w/a for HDCP 1.4 1A-07 failure based on ECO fixOliver Logush2-4/+2
[why] W/a no longer needed Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Oliver Logush <oliver.logush@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Create underflow interrupt IRQ typeAngus Wang1-0/+1
[WHY] We want another entry in IRQ type that can be used to help find the underflow interrupt source. [HOW] Added another mapping in IRQ type enum. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Angus Wang <Angus.Wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31platform/chrome: cros_ec_debugfs: detach log reader wq from devmTzung-Bi Shih1-6/+6
Debugfs console_log uses devm memory (e.g. debug_info in cros_ec_console_log_poll()). However, lifecycles of device and debugfs are independent. An use-after-free issue is observed if userland program operates the debugfs after the memory has been freed. The call trace: do_raw_spin_lock _raw_spin_lock_irqsave remove_wait_queue ep_unregister_pollwait ep_remove do_epoll_ctl A Python example to reproduce the issue: ... import select ... p = select.epoll() ... f = open('/sys/kernel/debug/cros_scp/console_log') ... p.register(f, select.POLLIN) ... p.poll(1) [(4, 1)] # 4=fd, 1=select.POLLIN [ shutdown cros_scp at the point ] ... p.poll(1) [(4, 16)] # 4=fd, 16=select.POLLHUP ... p.unregister(f) An use-after-free issue raises here. It called epoll_ctl with EPOLL_CTL_DEL which in turn to use the workqueue in the devm (i.e. log_wq). Detaches log reader's workqueue from devm to make sure it is persistent even if the device has been removed. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Reviewed-by: Guenter Roeck <groeck@google.com> Link: https://lore.kernel.org/r/20220209051130.386175-1-tzungbi@google.com Signed-off-by: Benson Leung <bleung@chromium.org>
2022-03-31platform: chrome: Split trace include fileGwendal Grignou4-97/+127
cros_ec_trace.h defined 5 tracing events, 2 for cros_ec_proto and 3 for cros_ec_sensorhub_ring. These 2 files are in different kernel modules, the traces are defined twice in the kernel which leads to problem enabling only some traces. Move sensorhub traces from cros_ec_trace.h to cros_ec_sensorhub_trace.h and enable them only in cros_ec_sensorhub kernel module. Check we can now enable any single traces: without this patch, we can only enable all sensorhub traces or none. Fixes: d453ceb6549a ("platform/chrome: sensorhub: Add trace events for sample") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220122001301.640337-1-gwendal@chromium.org Signed-off-by: Benson Leung <bleung@chromium.org>
2022-03-31Merge tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifsLinus Torvalds3-24/+21
Pull JFFS2, UBI and UBIFS updates from Richard Weinberger: "JFFS2: - Fixes for various memory issues UBI: - Fix for a race condition in cdev ioctl handler UBIFS: - Fixes for O_TMPFILE and whiteout handling - Fixes for various memory issues" * tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: rename_whiteout: correct old_dir size computing jffs2: fix memory leak in jffs2_scan_medium jffs2: fix memory leak in jffs2_do_mount_fs jffs2: fix use-after-free in jffs2_clear_xattr_subsystem fs/jffs2: fix comments mentioning i_mutex ubi: fastmap: Return error code if memory allocation fails in add_aeb() ubifs: Fix to add refcount once page is set private ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock() ubifs: setflags: Make dirtied_ino_d 8 bytes aligned ubifs: Rectify space amount budget for mkdir/tmpfile operations ubifs: Fix 'ui->dirty' race between do_tmpfile() and writeback work ubifs: Rename whiteout atomically ubifs: Add missing iput if do_tmpfile() failed in rename whiteout ubifs: Fix wrong number of inodes locked by ui_mutex in ubifs_inode comment ubifs: Fix deadlock in concurrent rename whiteout and inode writeback ubifs: rename_whiteout: Fix double free for whiteout_ui->data ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl
2022-03-31drbd: remove check of list iterator against head past the loop bodyJakob Koschel1-15/+27
When list_for_each_entry() completes the iteration over the whole list without breaking the loop, the iterator value will be a bogus pointer computed based on the head element. While it is safe to use the pointer to determine if it was computed based on the head element, either with list_entry_is_head() or &pos->member == head, using the iterator variable after the loop should be avoided. In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to point to the found element [1]. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20220331220349.885126-2-jakobkoschel@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-31drbd: remove usage of list iterator variable after loopJakob Koschel1-2/+5
In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to iterate through the list [1]. Since that variable should not be used past the loop iteration, a separate variable is used to 'remember the current location within the loop'. To either continue iterating from that position or skip the iteration (if the previous iteration was complete) list_prepare_entry() is used. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220331220349.885126-1-jakobkoschel@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-31Merge tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/randomLinus Torvalds3-6/+20
Pull random number generator fixes from Jason Donenfeld: - If a hardware random number generator passes a sufficiently large chunk of entropy to random.c during early boot, we now skip the "fast_init" business and let it initialize the RNG. This makes CONFIG_RANDOM_TRUST_BOOTLOADER=y actually useful. - We already have the command line `random.trust_cpu=0/1` option for RDRAND, which let distros enable CONFIG_RANDOM_TRUST_CPU=y while placating concerns of more paranoid users. Now we add `random.trust_bootloader=0/1` so that distros can similarly enable CONFIG_RANDOM_TRUST_BOOTLOADER=y. - Re-add a comment that got removed by accident in the recent revert. - Add the spec-compliant ACPI CID for vmgenid, which Microsoft added to the vmgenid spec at Ard's request during earlier review. - Restore build-time randomness via the latent entropy plugin, which was lost when we transitioned to using a hash function. * tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: random: mix build-time latent entropy into pool at init virt: vmgenid: recognize new CID added by Hyper-V random: re-add removed comment about get_random_{u32,u64} reseeding random: treat bootloader trust toggle the same way as cpu trust toggle random: skip fast_init if hwrng provides large chunk of entropy
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.