| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
I2C slave events tracepoints can be enabled by:
echo 1 > /sys/kernel/tracing/events/i2c_slave/enable
and logs in /sys/kernel/tracing/trace will look like:
... i2c_slave: i2c-0 a=010 ret=0 WR_REQ []
... i2c_slave: i2c-0 a=010 ret=0 WR_RCV [02]
... i2c_slave: i2c-0 a=010 ret=0 WR_RCV [0c]
... i2c_slave: i2c-0 a=010 ret=0 STOP []
... i2c_slave: i2c-0 a=010 ret=0 RD_REQ [04]
... i2c_slave: i2c-0 a=010 ret=0 RD_PRO [b4]
... i2c_slave: i2c-0 a=010 ret=0 STOP []
formatted as:
i2c-<adapter_nr>
a=<addr>
ret=<ret> <- callback return value
<event>
[<data>]
trace printings can be selected by adding a filter like:
echo adapter_nr==1 >/sys/kernel/tracing/events/i2c_slave/filter
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Pull SCSI fixes from James Bottomley:
"Two small(ish) fixes, both in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Finish scsi_cmnd before dropping the spinlock
scsi: mpt3sas: Page fault in reply q processing
|
|
Pull char/misc driver fix from Greg KH:
"Here is a single driver fix for 5.17-final that has been submitted
many times but I somehow missed it in my patch queue:
- fix for counter sysfs code for reported problem
This has been in linux-next all week with no reported issues"
* tag 'char-misc-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: Stop using dev_get_drvdata() to get the counter device
|
|
Pull USB fixes from Greg KH:
"Here are some small remaining USB fixes for 5.17-final.
They include:
- two USB gadget driver fixes for reported problems
- usbtmc driver fix for syzbot found issues
- musb patch partial revert to resolve a reported regression.
All of these have been in linux-next this week with no reported
problems"
* tag 'usb-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: Fix use-after-free bug by not setting udc->dev.driver
usb: usbtmc: Fix bug in pipe direction for control transfers
partially Revert "usb: musb: Set the DT node on the child device"
usb: gadget: rndis: prevent integer overflow in rndis_set_response()
|
|
Saeed Mahameed says:
====================
mlx5-updates-2022-03-18
1) XDP multi buffer support
This series enables XDP on non-linear legacy RQ in multi buffer mode.
When XDP is enabled, fragmentation scheme on non-linear legacy RQ is
adjusted to comply to limitations of XDP multi buffer (fragments of the
same size). DMA addresses of fragments are stored in struct page for the
completion handler to be able to unmap them. XDP_TX is supported.
XDP_REDIRECT is not yet supported, the XDP core blocks it for multi
buffer packets at the moment.
2) Trivial cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/usb/gadget/udc/fsl_qe_udc.c: In function ‘qe_ep_dequeue’:
drivers/usb/gadget/udc/fsl_qe_udc.c:1792:3: error: expected ‘;’ before ‘req’
req = iter;
^~~
Add missing semicolon to fix this.
Fixes: 838884110f0d ("usb: gadget: fsl: remove usage of list iterator past the loop body")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220319065031.36928-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This code is fine, but it's easier to review if we use snprintf()
instead of sprintf().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220318074723.GA6617@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The skb will be checked in kfree_skb(), so remove the outside check.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20220318072728.2659578-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2022-03-17
This series contains updates to i40e and igb drivers.
Tom Rix moves a conversion to little endian to occur only when the
value is used for i40e. He also zeros out a structure to resolve
possible use of garbage value for igb as reported by clang.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igb: zero hwtstamp by default
i40e: little endian only valid checksums
====================
Link: https://lore.kernel.org/r/20220317160236.3534321-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for Asus TF103C
- Add support for Realtek RTL8852B
- Add support for Realtek RTL8723BE
- Add WBS support to mt7921s
* tag 'for-net-next-2022-03-18' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (24 commits)
Bluetooth: ath3k: remove superfluous header files
Bluetooth: bcm203x: remove superfluous header files
Bluetooth: hci_bcm: Add the Asus TF103C to the bcm_broken_irq_dmi_table
Bluetooth: mt7921s: Add WBS support
Bluetooth: mt7921s: Add .btmtk_get_codec_config_data
Bluetooth: mt7921s: Add .get_data_path_id
Bluetooth: mt7921s: Set HCI_QUIRK_VALID_LE_STATES
Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt
Bluetooth: btmtkuart: fix error handling in mtk_hci_wmt_sync()
Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failed
Bluetooth: Send AdvMonitor Dev Found for all matched devices
Bluetooth: msft: Clear tracked devices on resume
Bluetooth: fix incorrect nonblock bitmask in bt_sock_wait_ready()
Bluetooth: Don't assign twice the same value
Bluetooth: btrtl: Add support for RTL8852B
Bluetooth: hci_uart: add missing NULL check in h5_enqueue
Bluetooth: Fix use after free in hci_send_acl
Bluetooth: btusb: Use quirk to skip HCI_FLT_CLEAR_ALL on fake CSR controllers
Bluetooth: hci_sync: Add a new quirk to skip HCI_FLT_CLEAR_ALL
Bluetooth: btmtkuart: fix the conflict between mtk and msft vendor event
...
====================
Link: https://lore.kernel.org/r/20220318224752.1477292-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add logical mapping for VDBOXs. This mapping is required for
split-frame workloads, which otherwise fail with
00000000-F8C53528: [GUC] 0441-INVALID_ENGINE_SUBMIT_MASK
... if the application is using the logical id to reorder the engines and
then using it for the batch buffer submission. It's not a big problem on
media version 11 and 12 as they have only 2 instances of VCS and the
logical to physical mapping is monotonically increasing - if the
application is not using the logical id.
Changing it for the previous platforms allows the media driver
implementation for the next ones (12.50 and above) to be the same,
checking the logical id. It should also not introduce any bug for the
old versions of userspace not checking the id.
The mapping added here is the complete map needed by XEHPSDV. Previous
platforms with only 2 instances will just use a partial map and should
still work.
v2: Remove static from map variable (José)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
[ Extend the mapping to media versions 11 and 12 and give proper
justification in the commit message why ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316234538.434357-2-lucas.demarchi@intel.com
|
|
Earlier versions of commit a5b7ef27da60 ("drm/i915: Add struct to hold
IP version") named "ver" as "arch" and then when it was renamed it
missed the rename on MEDIA_VER_FULL() since it it's currently not used.
Fixes: a5b7ef27da60 ("drm/i915: Add struct to hold IP version")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316234538.434357-1-lucas.demarchi@intel.com
|
|
Sadly, while firmware 1.5 fixed temperature labels on my
Inspiron 3505, it also caused fan type calls to take
ca. 4 seconds with the fan being at full speed.
Fix the resulting delays by adding the model to the
blacklist.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220318183408.13286-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix an invalid kfree in mpfs_sys_controller_delete, by replacing the
devm_kzalloc with a regular kzalloc. Change the error handling in the
probe function to free the sys_controller struct if the probe fails.
> cocci warnings: (new ones prefixed by >>)
> >> drivers/soc/microchip/mpfs-sys-controller.c:73:1-6: WARNING: invalid free of devm_ allocated data
Link: https://lore.kernel.org/linux-mm/202203180259.lgIylRZV-lkp@intel.com/
Fixes: d0054a470c33 ("soc: add microchip polarfire soc system controller")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <mail@conchuod.ie>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Variable index is being assigned a value that is never read, it is being
re-assigned later in a following for-loop. The assignment is redundant
and can be removed.
Cleans up clang scan build warning:
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c:1358:17: warning:
Although the value stored to 'index' is used in the enclosing expression,
the value is never actually read from 'index' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220318012035.89482-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Variable sie is being assigned a value that is never read. The
The assignment is redundant and can be removed.
Cleans up clang scan build warning:
drivers/net/ethernet/atheros/atl1c/atl1c_main.c:1054:22: warning:
Although the value stored to 'size' is used in the enclosing
expression, the value is never actually read from 'size'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220318005021.82073-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add driver for Renesas 9-series PCIe clock generators. This driver
is designed to support 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ series I2C
PCIe clock generators, currently the only tested and supported chip
is 9FGV0241.
The driver is capable of configuring per-chip spread spectrum mode
and output amplitude, as well as per-output slew rate.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220226040723.143705-3-marex@denx.de
[sboyd@kernel.org: Use non-underscore API for fixed factor]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add an API for a fixed factor clk that uses an index for the parent
instead of a string name. This allows us to move drivers away from the
string based method of describing parents and use the DT/firmware based
method instead.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220226040723.143705-2-marex@denx.de
[sboyd@kernel.org: Expose a new API instead of internal function]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
There is no function mlx5e_get_sq(), remove the declaration.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
|
|
Starting from commit
4cab346bcf74 ("net/mlx5: No command allowed when command interface is not ready"),
no calls to mlx5_cmd_trigger_completions() are external to cmd.c anymore.
Make it a static function.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
After introducing multi-buffer XDP_TX, the MLX5E_XDP_TX_DS_COUNT define
became misleading. It's no longer the DS count of an XDP_TX WQE, this
WQE can be longer because of fragments.
As this define is only used at one place in mlx5e_open_xdpsq(), it's
also not very useful anymore. This commit removes the define and puts
the calculation of ds_count for prefilled single-fragment WQEs inline.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Now that legacy RQ implements XDP in the non-linear mode, stop blocking
this configuration. Allow non-linear mode only for programs aware of
multi buffer.
XDP performance with linear mode RQ hasn't changed.
Baseline (MTU 1500, TX MPWQE, legacy RQ, single core):
60-byte packets, XDP_DROP: 11.25 Mpps
60-byte packets, XDP_TX: 9.0 Mpps
60-byte packets, XDP_PASS: 668 kpps
Multi buffer (MTU 9000, TX MPWQE, legacy RQ, single core):
60-byte packets, XDP_DROP: 10.1 Mpps
60-byte packets, XDP_TX: 6.6 Mpps
60-byte packets, XDP_PASS: 658 kpps
8900-byte packets, XDP_DROP: 769 kpps (100% of sent packets)
8900-byte packets, XDP_TX: 674 kpps (100% of sent packets)
8900-byte packets, XDP_PASS: 637 kpps
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This commit enables passing multi buffer XDP frames to the TX handlers
on XDP_TX. Fragments are DMA synchronized to the device and queued to
the xdpi_fifo for a subsequent unmapping.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The next commit will add more indentation levels to mlx5e_xmit_xdp_buff.
To keep indentation minimal, unindent the else-block of the if-statement
by doing an early return.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
xmit_xdp_frame is extended to support sending fragmented XDP frames. The
next commit will start using this functionality.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When MPWQE is disabled, mlx5e_open_xdpsq() prefills the common fields of
WQEs in the XDP SQ to save time when sending packets.
mlx5e_xmit_xdp_frame() runs on the prefilled fields, however, sending
multi buffer XDP frames would require changing some of these fields on a
per-packet basis. Besides that, mlx5e_xmit_xdp_frame() will be used as a
fallback to send multi buffer XDP frames when MPWQE is enabled (MPWQE
can only handle linear packets).
In order to prepare for XDP multi buffer support, this commit introduces
a mode for mlx5e_xmit_xdp_frame() that fills all the fields itself.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When MPWQE is disabled, mlx5e_open_xdpsq prefills the common fields of
WQEs in the XDP SQ to save time when sending packets. One of such fields
is eseg->inline_hdr.sz, which can be either 0 or MLX5E_XDP_MIN_INLINE,
depending on the inline mode of the SQ.
The inline mode can't change during the lifetime of the SQ, so setting
this field again in mlx5e_xmit_xdp_frame is redundant. Moreover, the
xmit function only sets it to MLX5E_XDP_MIN_INLINE, but not to 0 in the
other case.
This commit removes the redundant assignment in mlx5e_xmit_xdp_frame.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The implementations of xmit_xdp_frame get the xdpi parameter of type
struct mlx5e_xdp_info for the sole purpose of calling
mlx5e_xdpi_fifo_push() on success.
This commit moves this call outside of xmit_xdp_frame, shifting this
responsibility to the caller. It will allow more fine-grained handling
of XDP info for cases when an xdp_frame is fragmented.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Use page_pool_set_dma_addr() to store the DMA address of a page inside
struct page, in order to avoid passing struct mlx5e_dma_info to XDP
handlers. Previously, struct mlx5e_dma_info was used to pass both the
DMA address and the page, and it worked well for the single-fragment
case.
When XDP multi buffer is in use, and a fragmented xdp_frame has to be
transmitted, the driver needs to know the DMA addresses of fragments,
however, the array of fragments in struct skb_shared_info doesn't
contain them. In order to pass the DMA addresses, the driver puts them
into struct page itself, which is accessible from the array of fragments
in struct skb_shared_info. The existing XDP handlers are modified to
remove the dependency on struct mlx5e_dma_info.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This commit adds XDP multi buffer support to the RX path in the
non-linear legacy RQ mode. mlx5e_xdp_handle is called from
mlx5e_skb_from_cqe_nonlinear.
XDP_TX action for fragmented XDP frames is not yet supported and
blocked.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The implementation of XDP in mlx5e assumes that the frame size is equal
to the page size. Force this limitation in the non-linear mode for XDP
multi buffer.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
XDP multi buffer implementation in the kernel assumes that all fragments
have the same size. bpf_xdp_frags_increase_tail uses this assumption to
get the size of the last fragment, and __xdp_build_skb_from_frame uses
it to calculate truesize as nr_frags * xdpf->frame_sz.
The current implementation of mlx5e uses fragments of different size in
non-linear legacy RQ. Specifically, the last fragment can be larger than
the others. It's an optimization for packets smaller than MTU.
This commit adapts mlx5e to the kernel limitations and makes it use
fragments of the same size, in order to add support for XDP multi
buffer. The change is applied only if XDP is active, otherwise the old
optimization still applies.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5e_skb_from_cqe_nonlinear creates an xdp_buff first, putting the
first fragment as the linear part, and the rest of fragments as
fragments to struct skb_shared_info in the tailroom. Then it creates an
SKB in place, based on the xdp_buff. The XDP program is not called in
this commit yet.
This commit contains no functional change, except the SKB is built over
the whole frag_stride of the first fragment, instead of the minimal size
required (headroom, data and skb_shared_info).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Name all the ICL_PCODE_SAGV_DE_MEM_SS_CONFIG request/response
bits in a manner that we can actually understand what they're
doing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
Use separate bitmasks for QGV vs. PSF GV points during
the computation. Makes the whole thing a lot less confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-8-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
Don't just mask off all the PSF GV points when SAGV gets disabled.
This should in fact cause the Pcode to reject the request since
at least one PSF point must remain enabled at all times.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
Give the pre-icl SAGV control functions a skl_ prefix instead
of the intel_ prefix to make it a bit more clear that they
are not some kind of universal things that can be called on
any platform. Also make the functions void since we never
use the return value anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
If the mailbox returns an exceesively large SAGV block time let's just
reject it. This avoids having to worry about overflows when we add the
SAGV block time to the wm0 latency.
We shall put the limit arbitrarily at U16_MAX. >65msec latency
doesn't really make sense to me in any case.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
Instead of leaving the SAGV enable/disable to the first commit
let's try to disable it first thing to see if we can do it or
not (disabling SAGV is a safe thing to at any time). This avoids
running the code in this funny intermediate state where we don't
know if SAGV is available or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
I'd like to see the SAGV block time we got from the mailbox
in the logs regardless of whether other factors prevent the
use of SAGV.
So let's adjust the code to always query the SAGV block time,
log it, and then reset it if SAGV is not actually supported.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
For modern platforms the spec explicitly states that a
SAGV block time of zero means that SAGV is not supported.
Let's extend that to all platforms. Supposedly there should
be no systems where this isn't true, and it'll allow us to:
- use the same code regardless of older vs. newer platform
- wm latencies already treat 0 as disabled, so this fits well
with other related code
- make it a bit more clear when SAGV is used vs. not
- avoid overflows from adding U32_MAX with a u16 wm0 latency value
which could cause us to miscalculate the SAGV watermarks on tgl+
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
Currently the reading of the onstack array is confusing since two
out of three members are of different types. Let it be more clear
by explicitly set the array size, so everybody will understand that
parameters are cast to the type of the array.
While at it, add a missed space.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The deprecated i2c ->probe() functionality doesn't work with
OF compatible strings, as it only checks for the i2c device id.
While it's not a problem right now, it would still bring a
better code. Switch to the new way of probing.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Use the module_i2c_driver() macro to make the code smaller
and a bit simpler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Make use of device property API in this driver so that both OF based
system and ACPI based system can use this driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Fix multi-line comment style:
- start sentences with Capital letter
- use non-networking style of the first line
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Easily hit the below list corruption:
==
list_add corruption. prev->next should be next (ffffffffc0ceb090), but
was ffffec604507edc8. (prev=ffffec604507edc8).
WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26
__list_add_valid+0x53/0x80
CPU: 65 PID: 3959 Comm: fbdev Tainted: G U
RIP: 0010:__list_add_valid+0x53/0x80
Call Trace:
<TASK>
fb_deferred_io_mkwrite+0xea/0x150
do_page_mkwrite+0x57/0xc0
do_wp_page+0x278/0x2f0
__handle_mm_fault+0xdc2/0x1590
handle_mm_fault+0xdd/0x2c0
do_user_addr_fault+0x1d3/0x650
exc_page_fault+0x77/0x180
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fd98fc8fad1
==
Figure out the race happens when one process is adding &page->lru into
the pagelist tail in fb_deferred_io_mkwrite(), another process is
re-initializing the same &page->lru in fb_deferred_io_fault(), which is
not protected by the lock.
This fix is to init all the page lists one time during initialization,
it not only fixes the list corruption, but also avoids INIT_LIST_HEAD()
redundantly.
V2: change "int i" to "unsigned int i" (Geert Uytterhoeven)
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Fixes: 105a940416fc ("fbdev/defio: Early-out if page is already enlisted")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318005003.51810-1-chuansheng.liu@intel.com
|
|
Pull block fixes from Jens Axboe:
- Revert of a nvme target feature (Hannes)
- Fix a memory leak with rq-qos (Ming)
* tag 'block-5.17-2022-03-18' of git://git.kernel.dk/linux-block:
nvmet: revert "nvmet: make discovery NQN configurable"
block: release rq qos structures for queue without disk
|
|
SPI NOR core changes:
- move vendor specific code out of the core into vendor drivers.
- unify all function and object names in the vendor modules.
- make setup() callback optional to improve readability.
- skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
declaration.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Pull drm fixes from Dave Airlie:
"A few minor changes to finish things off, one mgag200 regression, imx
fix and couple of panel changes.
imx:
- Don't test bus flags in atomic check
mgag200:
- Fix PLL setup on some models
panel:
- Fix bpp settings on Innolux G070Y2-L01
- Fix DRM_PANEL_EDP Kconfig dependencies"
* tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drm:
drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS
drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings
drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
drm/mgag200: Fix PLL setup for g200wb and g200ew
|
Jae Hyun Yoo
Linus Torvalds
David S. Miller
YueHaibing
Dan Carpenter
Yang Yingliang
Jakub Kicinski
Matthew Brost
Lucas De Marchi
Armin Wolf
Conor Dooley
Colin Ian King
Marek Vasut
Saeed Mahameed
Tariq Toukan
Maxim Mikityanskiy
Ville Syrjälä
Andy Shevchenko
Chuansheng Liu
Miquel Raynal