| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use of_device_get_match_data() to simplify the code.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220303092131.2060044-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On Gen3 hardware enabling a VSP plane doesn't change any register that
requires DRES to take effect. Avoid a group restart in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The VSP1 sink selection through register DEFR8 is only available on Gen2
hardware. Skip it on Gen3.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
VBT 249 update to support more TMDS clock rate 3.00G, 3.40G
and 5.94G. Refer to this new definition to configure max
TMDS clock rate for HDMI driver.
BSpec: 20124
v2: new subject
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303083802.5071-1-shawn.c.lee@intel.com
|
|
This is not supported for ADLP and is not needed.
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302231119.16876-1-swathi.dhanavanthri@intel.com
|
|
Register its own handler for pci_error_handlers.reset_done and update
state accordingly.
Link: https://lore.kernel.org/all/20220224142024.147653-16-yishaih@nvidia.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Expose vfio_pci_core_aer_err_detected() to be used by drivers as part of
their pci_error_handlers structure.
Next patch for mlx5 driver will use it.
Link: https://lore.kernel.org/all/20220224142024.147653-15-yishaih@nvidia.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
This patch adds support for vfio_pci driver for mlx5 devices.
It uses vfio_pci_core to register to the VFIO subsystem and then
implements the mlx5 specific logic in the migration area.
The migration implementation follows the definition from uapi/vfio.h and
uses the mlx5 VF->PF command channel to achieve it.
This patch implements the suspend/resume flows.
Link: https://lore.kernel.org/all/20220224142024.147653-14-yishaih@nvidia.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Expose migration commands over the device, it includes: suspend, resume,
get vhca id, query/save/load state.
As part of this adds the APIs and data structure that are needed to manage
the migration data.
Link: https://lore.kernel.org/all/20220224142024.147653-13-yishaih@nvidia.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
CONFIG_DMA_REMAP is used to build a few helpers around the core
vmalloc code, and to use them in case there is a highmem page in
dma-direct, and to make dma coherent allocations be able to use
non-contiguous pages allocations for DMA allocations in the dma-iommu
layer.
Right now it needs to be explicitly selected by architectures, and
is only done so by architectures that require remapping to deal
with devices that are not DMA coherent. Make it unconditional for
builds with CONFIG_MMU as it is very little extra code, but makes
it much more likely that large DMA allocations succeed on x86.
This fixes hot plugging a NVMe thunderbolt SSD for me, which tries
to allocate a 1MB buffer that is otherwise hard to obtain due to
memory fragmentation on a heavily used laptop.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
|
|
The RUNNING_P2P state is designed to support multiple devices in the same
VM that are doing P2P transactions between themselves. When in RUNNING_P2P
the device must be able to accept incoming P2P transactions but should not
generate outgoing P2P transactions.
As an optional extension to the mandatory states it is defined as
in between STOP and RUNNING:
STOP -> RUNNING_P2P -> RUNNING -> RUNNING_P2P -> STOP
For drivers that are unable to support RUNNING_P2P the core code
silently merges RUNNING_P2P and RUNNING together. Unless driver support
is present, the new state cannot be used in SET_STATE.
Drivers that support this will be required to implement 4 FSM arcs
beyond the basic FSM. 2 of the basic FSM arcs become combination
transitions.
Compared to the v1 clarification, NDMA is redefined into FSM states and is
described in terms of the desired P2P quiescent behavior, noting that
halting all DMA is an acceptable implementation.
Link: https://lore.kernel.org/all/20220224142024.147653-11-yishaih@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Replace the existing region based migration protocol with an ioctl based
protocol. The two protocols have the same general semantic behaviors, but
the way the data is transported is changed.
This is the STOP_COPY portion of the new protocol, it defines the 5 states
for basic stop and copy migration and the protocol to move the migration
data in/out of the kernel.
Compared to the clarification of the v1 protocol Alex proposed:
https://lore.kernel.org/r/163909282574.728533.7460416142511440919.stgit@omen
This has a few deliberate functional differences:
- ERROR arcs allow the device function to remain unchanged.
- The protocol is not required to return to the original state on
transition failure. Instead userspace can execute an unwind back to
the original state, reset, or do something else without needing kernel
support. This simplifies the kernel design and should userspace choose
a policy like always reset, avoids doing useless work in the kernel
on error handling paths.
- PRE_COPY is made optional, userspace must discover it before using it.
This reflects the fact that the majority of drivers we are aware of
right now will not implement PRE_COPY.
- segmentation is not part of the data stream protocol, the receiver
does not have to reproduce the framing boundaries.
The hybrid FSM for the device_state is described as a Mealy machine by
documenting each of the arcs the driver is required to implement. Defining
the remaining set of old/new device_state transitions as 'combination
transitions' which are naturally defined as taking multiple FSM arcs along
the shortest path within the FSM's digraph allows a complete matrix of
transitions.
A new VFIO_DEVICE_FEATURE of VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE is
defined to replace writing to the device_state field in the region. This
allows returning a brand new FD whenever the requested transition opens
a data transfer session.
The VFIO core code implements the new feature and provides a helper
function to the driver. Using the helper the driver only has to
implement 6 of the FSM arcs and the other combination transitions are
elaborated consistently from those arcs.
A new VFIO_DEVICE_FEATURE of VFIO_DEVICE_FEATURE_MIGRATION is defined to
report the capability for migration and indicate which set of states and
arcs are supported by the device. The FSM provides a lot of flexibility to
make backwards compatible extensions but the VFIO_DEVICE_FEATURE also
allows for future breaking extensions for scenarios that cannot support
even the basic STOP_COPY requirements.
The VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE with the GET option (i.e.
VFIO_DEVICE_FEATURE_GET) can be used to read the current migration state
of the VFIO device.
Data transfer sessions are now carried over a file descriptor, instead of
the region. The FD functions for the lifetime of the data transfer
session. read() and write() transfer the data with normal Linux stream FD
semantics. This design allows future expansion to support poll(),
io_uring, and other performance optimizations.
The complicated mmap mode for data transfer is discarded as current qemu
doesn't take meaningful advantage of it, and the new qemu implementation
avoids substantially all the performance penalty of using a read() on the
region.
Link: https://lore.kernel.org/all/20220224142024.147653-10-yishaih@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Invoke a new device op 'device_feature' to handle just the data array
portion of the command. This lifts the ioctl validation to the core code
and makes it simpler for either the core code, or layered drivers, to
implement their own feature values.
Provide vfio_check_feature() to consolidate checking the flags/etc against
what the driver supports.
Link: https://lore.kernel.org/all/20220224142024.147653-9-yishaih@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Spectrum machines support L3 stats by binding a counter to a RIF, a
hardware object representing a router interface. Recognize the netdevice
notifier events, NETDEV_OFFLOAD_XSTATS_*, to support enablement,
disablement, and reporting back to core.
As a netdevice gains a RIF, if L3 stats are enabled, install the counters,
and ping the core so that a userspace notification can be emitted.
Similarly, as a netdevice loses a RIF, push the as-yet-unreported
statistics to the core, so that they are not lost, and ping the core to
emit userspace notification.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several more events are coming in the following patches, and extending the
if statement is getting awkward. Instead, convert it to a switch.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mlxsw_sp reference is carried by the mlxsw_sp_rif object that is passed
to these functions as well. Just deduce the former from the latter,
and drop the explicit mlxsw_sp parameter. Adapt callers.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function mlxsw_reg_ritr_counter_pack() formats a register to configure
a router interface (RIF) counter. The parameter `egress' determines whether
an ingress or egress counter is to be configured. RITR, the register in
question, has two sets of counter-related fields: one for ingress, one for
egress. When setting values of the fields, the function sets the proper
counter index field, but when setting the counter type, it always sets the
egress field. Thus configuration of ingress counters is broken, and in fact
an attempt to configure an ingress counter mangles a previously configured
egress counter.
This was never discovered, because there is currently no way to enable
ingress counters on a router interface, only the egress one.
Fix in an obvious way.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During driver initialization, the pointer of card info, i.e. the
variable 'ci' is required. However, the definition of
'com20020pci_id_table' reveals that this field is empty for some
devices, which will cause null pointer dereference when initializing
these devices.
The following log reveals it:
[ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci]
[ 3.975181] Call Trace:
[ 3.976208] local_pci_probe+0x13f/0x210
[ 3.977248] pci_device_probe+0x34c/0x6d0
[ 3.977255] ? pci_uevent+0x470/0x470
[ 3.978265] really_probe+0x24c/0x8d0
[ 3.978273] __driver_probe_device+0x1b3/0x280
[ 3.979288] driver_probe_device+0x50/0x370
Fix this by checking whether the 'ci' is a null pointer first.
Fixes: 8c14f9c70327 ("ARCNET: add com20020 PCI IDs with metadata")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Today when VFs are put in promiscuous mode, they can request PF
to configure device for them to receive all VLANs traffic regardless
of what vlan is configured by the PF (via ip link) and PF allows this
config request regardless of whether VF is trusted or not.
From security POV, when VLAN is configured for VF through PF (via ip link),
honour such config requests from VF only when they are configured to be
trusted, otherwise restrict such VFs vlan promisc mode config.
Cc: stable@vger.kernel.org
Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Driver does support SR-IOV VFs trust configuration but
it does not display it when queried via ip link utility.
Cc: stable@vger.kernel.org
Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Not all platforms should have RGMII_CONFIG_LOOPBACK_EN and the result it
about 50% packet loss on incoming messages. So make it possile to
configure this per compatible and enable it for QCS404.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds compatible, POR config & driver data for ethernet controller
found in SM8150 SoC.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[bhsharma: Massage the commit log and other cosmetic changes]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the sm712fb driver writes three bytes to the framebuffer, the
driver will crash:
BUG: unable to handle page fault for address: ffffc90001ffffff
RIP: 0010:smtcfb_write+0x454/0x5b0
Call Trace:
vfs_write+0x291/0xd60
? do_sys_openat2+0x27d/0x350
? __fget_light+0x54/0x340
ksys_write+0xce/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix it by removing the open-coded endianness fixup-code.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.
Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This change adds support for the page_pool_get_stats API to mlx5. If the
user has enabled CONFIG_PAGE_POOL_STATS in their kernel, ethtool will
output page pool stats.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The rcar-du driver goes to great lengths to preserve device tree
backward compatibility for the LVDS encoders by patching old device
trees at runtime.
The last R-Car Gen2 platform was converted to the new bindings commit
edb0c3affe5214a2 ("ARM: dts: r8a7793: Convert to new LVDS DT bindings"),
in v4.17, and the last RZ/G1 platform converted in commit
6a6a797625b5fe85 ("ARM: dts: r8a7743: Convert to new LVDS DT bindings"),
in v5.0. Both are older than commit 58256143cff7c2e0 ("clk: renesas:
Remove R-Car Gen2 legacy DT clock support"), in v5.5, which removes
support for legacy bindings for clocks. The LVDS compatibility code is
thus not needed anymore. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The M3-W+ SoC has the same LVDS encoder as other R-Car Gen3 chips.
Add support for M3-W+ (R8A77961) SoC to the LVDS encoder driver.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Pointer mode is being assigned a value that is never read, it is
being re-assigned later with a new value. The initialization is
redundant and can be removed.
Cleans up clang scan build warning:
drivers/gpu/drm/solomon/ssd130x.c:582:27: warning: Value stored
to 'mode' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302175309.1098827-1-colin.i.king@gmail.com
|
|
Add a new "simple" driver for certain Nokia phones, including Nokia 130
(RM-1035) which exposes two serial ports in "charging only" mode:
Bus 001 Device 009: ID 0421:069a Nokia Mobile Phones 130 [RM-1035] (Charging only)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0421 Nokia Mobile Phones
idProduct 0x069a 130 [RM-1035] (Charging only)
bcdDevice 1.00
iManufacturer 1 Nokia
iProduct 2 Nokia 130 (RM-1035)
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0037
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220228084919.10656-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add support for direct RMII MAC mode. This allows hardware with CPU port
connected in direct 100M fixed link to work properly.
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Link: https://lore.kernel.org/r/a962d1ccbeec42daa10dd8aff0e66e31f0faf1eb.1646050203.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the given cmode has no serdes, mv88e6xxx_serdes_get_lane() returns
-NODEV. Earlier in the same function the code skips serdes handing in
this case. Do the same after cmode set.
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Link: https://lore.kernel.org/r/cd95cf3422ae8daf297a01fa9ec3931b203cdf45.1646050203.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to function, the IPA driver very clearly requires the
interconnect framework to be enabled in the kernel configuration.
State that dependency in the Kconfig file.
This became a problem when CONFIG_COMPILE_TEST support was added.
Non-Qualcomm platforms won't necessarily enable CONFIG_INTERCONNECT.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 38a4066f593c5 ("net: ipa: support COMPILE_TEST")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220301113440.257916-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2022-03-01
This series contains updates to iavf driver only.
Mateusz adds support for interrupt moderation for 50G and 100G speeds
as well as support for the driver to specify a request as its primary
MAC address. He also refactors VLAN V2 capability exchange into more
generic extended capabilities to ease the addition of future
capabilities. Finally, he corrects the incorrect return of iavf_status
values and removes non-inclusive language.
Minghao Chi removes unneeded variables, instead returning values
directly.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: Remove non-inclusive language
iavf: Fix incorrect use of assigning iavf_status to int
iavf: stop leaking iavf_status as "errno" values
iavf: remove redundant ret variable
iavf: Add usage of new virtchnl format to set default MAC
iavf: refactor processing of VLAN V2 capability message
iavf: Add support for 50G/100G in AIM algorithm
====================
Link: https://lore.kernel.org/r/20220301185939.3005116-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use ida_alloc_xxx()/ida_free() instead to
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220301131212.26348-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert sfp to use %pe for printing error codes, which can print them
as errno symbols rather than numbers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1nOyEN-00BuuE-OB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert phylink to use %pe for printing error codes, which can print
them as errno symbols rather than numbers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/E1nOyEI-00Buu8-K9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In patch [1], tun_msg_ctl was added to allow pass batched xdp buffers to
tun_sendmsg. Although we donot use msg_controllen in this path, we should
check msg_controllen to make sure the caller pass a valid msg_ctl.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fe8dd45bb7556246c6b76277b1ba4296c91c2505
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Harold Huang <baymaxhuang@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220303022441.383865-1-baymaxhuang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Energy Model (EM) can be created based on DT entry:
'dynamic-power-coefficient'. It's a 'simple' EM which is limited to the
dynamic power. It has to fit into the math formula which requires also
information about voltage. Some of the platforms don't expose voltage
information, thus it's not possible to use EM registration using DT.
This patch aims to fix it. It introduces new implementation of the EM
registration callback. The new mechanism relies on the new OPP feature
allowing to get power (which is coming from "opp-microwatt" DT property)
expressed in micro-Watts.
The patch also opens new opportunity to better support platforms, which
have a decent static power. It allows to register the EM based on real
power measurements which models total power (static + dynamic), so better
reflects real HW.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add new property to the OPP: power value. The OPP entry in the DT can have
"opp-microwatt". Add the needed code to handle this new property in the
existing infrastructure.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Remove the redundant null check since the caller ensures
that 'ctx' is never NULL.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Leftover from bring up. Not used anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Leftover from bring up. Not used anymore.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These were leftover from bring up and are no longer
necessary. The information is available via
the IP discovery table.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rather than checking the asic_type.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
structure changed in smc_fw_version >= 0x3A4900,
"uint16_t VcnActivityPercentage" replaced with
"uint16_t VcnUsagePercentage0" and "uint16_t VcnUsagePercentage1"
Signed-off-by: Danijel Slivka <danijel.slivka@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable gfxoff routine for GC 10.3.7.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable gfx power gating for GC 10.3.7.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will enable the following block clock gating.
- MC
- SDMA
- HDP
- ATHUB
- IH
- VCN/JPEG
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable gfx cg gate/ungate control for GC 10.3.7.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Minghao Chi (CGEL ZTE)
Laurent Pinchart
Lee Shawn C
Swathi Dhanavanthri
Yishai Hadas
Christoph Hellwig
Jason Gunthorpe
Petr Machata
Zheyu Ma
Manish Chopra
Bjorn Andersson
Vinod Koul
Yihao Han
Joe Damato
Nikita Yushchenko
Colin Ian King
Johan Hovold
Baruch Siach
Alex Elder
Jakub Kicinski
Christophe JAILLET
Russell King (Oracle)
Harold Huang
Lukasz Luba
Weiguo Li
Alex Deucher
Dillon Varone
Danijel Slivka
Prike Liang