aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-02-23media: imx: imx-mipi-csis: Add BGR888Jacopo Mondi1-0/+4
Add support for the BGR888_1X24 image format. No existing media bus codes describe exactly the way data is transferred on the CSI-2 bus. This is not a new issue, the CSI-2 YUV422 8-bit format is described by MEDIA_BUS_FMT_UYVY8_1X16 which is an arbitrary convention and not an exact match. Use the MEDIA_BUS_FMT_BGR888_1X24 to follow the same convention, based on the order in which bits are transmitted over the CSI-2 bus. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-02-23media: imx: imx-mipi-csis: Add RGB565_1X16Jacopo Mondi1-0/+6
Add RGB565_1X16 to the enumeration of supported image formats. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-02-23media: imx: imx-mipi-csis: Set PIXEL_MODE for YUV422Jacopo Mondi1-1/+20
Bits 13 and 12 of the ISP_CONFIGn register configure the PIXEL_MODE which specifies the sampling size, in pixel component units, on the CSI-2 output data interface when data are transferred to memory. The register description in the chip manual specifies that DUAL mode should be used for YUV422 data. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-02-23media: imx: imx7-media-csi: Use dual sampling for YUV 1X16Jacopo Mondi2-4/+53
The CSI bridge should operate in dual components mode when it is connected to a pixel transmitter that transfers two components at a time in YUV 422 formats (16 bits, Y + U/V). Use the image format variants to determine if single or dual component mode should be used. Add a note to the TODO file to record that the list of supported formats should be restricted to the SoC model the CSI bridge is integrated on to avoid potential pipeline mis-configurations. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-02-23media: imx: Rename imx7-mipi-csis.c to imx-mipi-csis.cJacopo Mondi2-4/+8
Rename the imx7-mipi-csis.c driver to remove the reference to i.MX7. The driver is for an IP core found on i.MX7 and i.MX8 SoC, so do not specify a SoC version number in the driver name. Remove the references to the i.MX7 SoC in the driver symbols and expand the driver's header with more information about the IP core the driver controls. Also rename the associated bindings documentation. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rui Miguel Silva <rmfrfs@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-02-23remove the h8300 architectureChristoph Hellwig16-1015/+4
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-02-22drm/i915/adl-n: Add PCH Support for Alder Lake NTejas Upadhyay2-0/+2
Add the PCH ID for ADL-N. Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220127103520.348015-1-tejaskumarx.surendrakumar.upadhyay@intel.com
2022-02-22ionic: use vmalloc includeShannon Nelson1-0/+1
The ever-vigilant Linux kernel test robot reminded us that we need to use the correct include files to be sure that all the build variations will work correctly. Adding the vmalloc.h include takes care of declaring our use of vzalloc() and vfree(). drivers/net/ethernet/pensando/ionic/ionic_lif.c:396:17: error: implicit declaration of function 'vfree'; did you mean 'kvfree'? drivers/net/ethernet/pensando/ionic/ionic_lif.c:531:21: warning: assignment to 'struct ionic_desc_info *' from 'int' makes pointer from integer without a cast Fixes: 116dce0ff047 ("ionic: Use vzalloc for large per-queue related buffers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20220223015731.22025-1-snelson@pensando.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23crypto: hisilicon/sec - fix the aead software fallback for engineKai Ye1-3/+13
Due to the subreq pointer misuse the private context memory. The aead soft crypto occasionally casues the OS panic as setting the 64K page. Here is fix it. Fixes: 6c46a3297bea ("crypto: hisilicon/sec - add fallback tfm...") Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-23crypto: ccree - don't attempt 0 len DMA mappingsGilad Ben-Yossef1-0/+7
Refuse to try mapping zero bytes as this may cause a fault on some configurations / platforms and it seems the prev. attempt is not enough and we need to be more explicit. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Fixes: ce0fc6db38de ("crypto: ccree - protect against empty or NULL scatterlists") Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-23crypto: octeontx2 - add synchronization between mailbox accessesHarman Kalra5-14/+46
Since there are two workqueues implemented in CPTPF driver - one for handling mailbox requests from VFs and another for handling FLR. In both cases PF driver will forward the request to AF driver by writing to mailbox memory. A race condition may arise if two simultaneous requests are written to mailbox memory. Introducing locking mechanism to maintain synchronization between multiple mailbox accesses. Signed-off-by: Harman Kalra <hkalra@marvell.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-02-23drm/msm: add support for QCM2290 MDSSLoic Poulain4-0/+151
Add compatibility for QCM2290 display subsystem, including required entries in DPU hw catalog. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474087/ Link: https://lore.kernel.org/r/1644852547-10067-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-23drm/msm/dsi: Add support for qcm2290 dsi controllerLoic Poulain3-0/+28
QCM2290 MDSS includes a Qualcomm DSI controller v2.4.1. Since this controller version is not SoC specific, and already assigned to sc7180 for auto configuration, we rely on DSI block specific compatible string "qcom,dsi-ctrl-6g-qcm2290", and use the device's data to point to the right dsi config handler. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474088/ Link: https://lore.kernel.org/r/1644853060-12222-2-git-send-email-loic.poulain@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-23drm/msm/dsi: Allow to specify dsi config as pdataLoic Poulain2-1/+5
Config autodetect based on DSI controller version is quite limited since several qcom SoCs can integrate a DSI controller with the same version, but with different config (io_offset, supplies, etc). This change allows to specify dsi config via device data pointer. config autodetect is still used in case data pointer is NULL. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/474089/ Link: https://lore.kernel.org/r/1644853060-12222-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2022-02-22scsi: pm8001: Fix pm8001_info() message formatDamien Le Moal1-1/+1
Make the driver messages more readable by adding a space after the message prefix ":" and removing the extra space between function name and line number. Link: https://lore.kernel.org/r/20220220031810.738362-32-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Improve pm80XX_send_abort_all()Damien Le Moal2-22/+8
Both pm8001_send_abort_all() and pm80xx_send_abort_all() are called only for a non null device with the NCQ_READ_LOG_FLAG set, so remove the device check on entry of these functions. Furthermore, setting the NCQ_ABORT_ALL_FLAG device id flag and clearing the NCQ_READ_LOG_FLAG is always done before calling these functions. Move these operations inside the functions. Link: https://lore.kernel.org/r/20220220031810.738362-31-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Simplify pm8001_ccb_task_free()Damien Le Moal4-62/+52
The task argument of the pm8001_ccb_task_free() function can be inferred from the ccb argument ccb_task field. So there is no need to have this argument. Likewise, the ccb_index argument is always equal to the ccb tag field and is not needed either. Remove both arguments and update all call sites. The pm8001_ccb_task_free_done() helper is also modified to match this change. Link: https://lore.kernel.org/r/20220220031810.738362-30-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Simplify pm8001_task_exec()Damien Le Moal1-92/+78
The main part of the pm8001_task_exec() function uses a do {} while(0) loop that is useless and only makes the code harder to read. Remove this loop. The unnecessary local variable t is also removed. Additionally, avoid repeatedly declaring "struct task_status_struct *ts" to handle error cases by declaring this variable for the entire function scope. This allows simplifying the error cases, and together with the addition of blank lines make the code more readable. Finally, handling of the running_req counter is fixed to avoid decrementing it without a corresponding incrementation in the case of an invalid task protocol. Link: https://lore.kernel.org/r/20220220031810.738362-29-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Simplify pm8001_mpi_build_cmd() interfaceDamien Le Moal3-166/+89
There is no need to pass a pointer to a struct inbound_queue_table to pm8001_mpi_build_cmd(). Passing the start index in the inbound queue table of the adapter is enough. This change allows avoiding the declaration of a struct inbound_queue_table pointer (circularQ variables) in many functions, simplifying the code. While at it, blank lines are added i(e.g. after local variable declarations) to make the code more readable. Link: https://lore.kernel.org/r/20220220031810.738362-28-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Introduce ccb alloc/free helpersDamien Le Moal4-171/+166
Introduce the pm8001_ccb_alloc() and pm8001_ccb_free() helpers to replace the typical code patterns: res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); if (res) ... ccb = &pm8001_ha->ccb_info[ccb_tag]; ccb->device = pm8001_ha_dev; ccb->ccb_tag = ccb_tag; ccb->task = task; ccb->n_elem = 0; and ccb->task = NULL; ccb->ccb_tag = PM8001_INVALID_TAG; pm8001_tag_free(pm8001_ha, tag); With the simpler function calls: ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task); if (!ccb) ... and pm8001_ccb_free(pm8001_ha, ccb); The pm8001_ccb_alloc() helper ensures that all fields of the ccb info structure for the newly allocated tag are all initialized, except the buf_prd field. The pm8001_ccb_free() helper clears the initialized fields and the ccb tag to ensure that iteration over the adapter ccb_info array detects ccbs that are in use. All call site of the pm8001_tag_alloc() function that use a ccb info associated with an allocated tag are converted to use the new helpers. Link: https://lore.kernel.org/r/20220220031810.738362-27-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Simplify pm8001_get_ncq_tag()Damien Le Moal1-9/+5
To detect if a command is NCQ, there is no need to test all possible NCQ command codes. Instead, use ata_is_ncq() to test the command protocol. Link: https://lore.kernel.org/r/20220220031810.738362-26-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Cleanup pm8001_exec_internal_task_abort()Damien Le Moal1-17/+21
Replace the goto statement in the for loop with "break" and remove the ex_err label. Also fix long lines, identation and blank lines to make the code more readable. Link: https://lore.kernel.org/r/20220220031810.738362-25-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: libsas: Simplify sas_ata_qc_issue() detection of NCQ commandsDamien Le Moal1-7/+2
To detect if a command is NCQ, there is no need to test all possible NCQ command codes. Instead, use ata_is_ncq() to test the command protocol. Link: https://lore.kernel.org/r/20220220031810.738362-24-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req()Damien Le Moal1-1/+3
In pm8001_chip_fw_flash_update_build(), if pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex allocated must be freed. Link: https://lore.kernel.org/r/20220220031810.738362-23-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix tag leaks on errorDamien Le Moal3-3/+17
In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(), pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd() fails. Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort method fails, the tag allocated for the abort request task must be freed. Add the missing call to pm8001_tag_free(). Link: https://lore.kernel.org/r/20220220031810.738362-22-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix task leak in pm8001_send_abort_all()Damien Le Moal1-3/+6
In pm8001_send_abort_all(), make sure to free the allocated sas task if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail. Link: https://lore.kernel.org/r/20220220031810.738362-21-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix tag values handlingDamien Le Moal5-47/+28
The function pm8001_tag_alloc() determines free tags using the function find_first_zero_bit() which can return 0 when the first bit of the bitmap being inspected is 0. As such, tag 0 is a valid tag value that should not be dismissed as invalid. Fix the functions pm8001_work_fn(), mpi_sata_completion(), pm8001_mpi_task_abort_resp() and pm8001_open_reject_retry() to not dismiss 0 tags as invalid. The value 0xffffffff is used for invalid tags for unused ccb information structures. Add the macro definition PM8001_INVALID_TAG to define this value. Link: https://lore.kernel.org/r/20220220031810.738362-20-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix pm8001_mpi_task_abort_resp()Damien Le Moal1-4/+3
The call to pm8001_ccb_task_free() at the end of pm8001_mpi_task_abort_resp() already frees the ccb tag. So when the device NCQ_ABORT_ALL_FLAG is set, the tag should not be freed again. Also change the hardcoded 0xBFFFFFFF value to ~NCQ_ABORT_ALL_FLAG as it ought to be. Link: https://lore.kernel.org/r/20220220031810.738362-19-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix pm8001_tag_alloc() failures handlingDamien Le Moal1-5/+10
In mpi_set_phy_profile_req() and in pm8001_set_phy_profile_single(), if pm8001_tag_alloc() fails to allocate a new tag, a warning message is issued but the uninitialized tag variable is still used to build a command. Avoid this by returning early in case of tag allocation failure. Also make sure to always return the error code returned by pm8001_tag_alloc() when this function fails instead of an arbitrary value. Link: https://lore.kernel.org/r/20220220031810.738362-18-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix abort all task initializationDamien Le Moal2-0/+3
In pm80xx_send_abort_all(), the n_elem field of the ccb used is not initialized to 0. This missing initialization sometimes lead to the task completion path seeing the ccb with a non-zero n_elem resulting in the execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(), causing a crash such as: [ 197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280 [ 197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012 [ 197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0 [ 197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0 [ 197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b [ 197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000 [ 197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000 [ 197.741493] FS: 0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000 [ 197.749659] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0 [ 197.762656] Call Trace: [ 197.765127] <IRQ> [ 197.767162] pm8001_ccb_task_free+0x5f1/0x820 [pm80xx] [ 197.772364] ? do_raw_spin_unlock+0x54/0x220 [ 197.776680] pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx] [ 197.782406] process_oq+0xe85/0x7890 [pm80xx] [ 197.786817] ? lock_acquire+0x194/0x490 [ 197.790697] ? handle_irq_event+0x10e/0x1b0 [ 197.794920] ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx] [ 197.800378] ? __wake_up_bit+0x100/0x100 [ 197.804340] ? lock_is_held_type+0x98/0x110 [ 197.808565] pm80xx_chip_isr+0x94/0x130 [pm80xx] [ 197.813243] tasklet_action_common.constprop.0+0x24b/0x2f0 [ 197.818785] __do_softirq+0x1b5/0x82d [ 197.822485] ? do_raw_spin_unlock+0x54/0x220 [ 197.826799] __irq_exit_rcu+0x17e/0x1e0 [ 197.830678] irq_exit_rcu+0xa/0x20 [ 197.834114] common_interrupt+0x78/0x90 [ 197.840051] </IRQ> [ 197.844236] <TASK> [ 197.848397] asm_common_interrupt+0x1e/0x40 Avoid this issue by always initializing the ccb n_elem field to 0 in pm8001_send_abort_all(), pm8001_send_read_log() and pm80xx_send_abort_all(). Link: https://lore.kernel.org/r/20220220031810.738362-17-damien.lemoal@opensource.wdc.com Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix NCQ NON DATA command completion handlingDamien Le Moal2-2/+4
NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a register-device-to-host-FIS response is expected for it. However, for an IO_SUCCESS case, mpi_sata_completion() expects a set-device-bits-FIS for any ata task with an use_ncq field true, which includes NCQ NON DATA commands. Fix this to correctly treat NCQ NON DATA commands as non-data by also testing for the DMA_NONE DMA direction. Link: https://lore.kernel.org/r/20220220031810.738362-16-damien.lemoal@opensource.wdc.com Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix NCQ NON DATA command task initializationDamien Le Moal2-14/+13
In the pm8001_chip_sata_req() and pm80xx_chip_sata_req() functions, all tasks with a DMA direction of DMA_NONE (no data transfer) are initialized using the ATAP value 0x04. However, NCQ NON DATA commands, while being DMA_NONE commands are NCQ commands and need to be initialized using the value 0x07 for ATAP, similarly to other NCQ commands. Make sure that NCQ NON DATA command tasks are initialized similarly to other NCQ commands by also testing the task "use_ncq" field in addition to the DMA direction. While at it, reorganize the code into a chain of if - else if - else to avoid useless affectations and debug messages. Link: https://lore.kernel.org/r/20220220031810.738362-15-damien.lemoal@opensource.wdc.com Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Remove local variable in pm8001_pci_resume()Damien Le Moal1-4/+4
In pm8001_pci_resume(), the use of the u32 type for the local variable device_state causes a sparse warning: warning: incorrect type in assignment (different base types) expected unsigned int [usertype] device_state got restricted pci_power_t [usertype] current_state Since this variable is used only once in the function, remove it and use pdev->current_state directly. While at it, also add a blank line after the last local variable declaration. Link: https://lore.kernel.org/r/20220220031810.738362-14-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix use of struct set_phy_profile_req fieldsDamien Le Moal2-6/+8
In mpi_set_phy_profile_req() and pm8001_set_phy_profile_single(), use cpu_to_le32() to initialize the ppc_phyid field of struct set_phy_profile_req. Furthermore, fix the definition of the reserved field of this structure to be an array of __le32, to match the use of cpu_to_le32() when assigning values. These changes remove several sparse type warnings. Link: https://lore.kernel.org/r/20220220031810.738362-13-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()Damien Le Moal1-37/+45
Make sure that the __le32 fields of struct sata_cmd are manipulated after applying the correct endian conversion. That is, use cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field value. In particular, make sure that the calculations for the 4G boundary check are done using CPU endianness and *not* little endian values. With these fixes, many sparse warnings are removed. While at it, fix some code identation and add blank lines after variable declarations and in some other places to make this code more readable. Link: https://lore.kernel.org/r/20220220031810.738362-12-damien.lemoal@opensource.wdc.com Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()Damien Le Moal1-16/+25
Make sure that the __le32 fields of struct ssp_ini_io_start_req are manipulated after applying the correct endian conversion. That is, use cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field value. In particular, make sure that the calculations for the 4G boundary check are done using CPU endianness and *not* little endian values. With these fixes, many sparse warnings are removed. While at it, add blank lines after variable declarations and in some other places to make this code more readable. Link: https://lore.kernel.org/r/20220220031810.738362-11-damien.lemoal@opensource.wdc.com Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()Damien Le Moal1-3/+4
All fields of the kek_mgmt_req structure have the type __le32. So make sure to use cpu_to_le32() to initialize them. This suppresses the sparse warning: warning: incorrect type in assignment (different base types) expected restricted __le32 [addressable] [assigned] [usertype] new_curidx_ksop got int Link: https://lore.kernel.org/r/20220220031810.738362-10-damien.lemoal@opensource.wdc.com Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()Damien Le Moal1-26/+24
All fields of the SASProtocolTimerConfig structure have the __le32 type. As such, use cpu_to_le32() to initialize them. This change suppresses many sparse warnings: warning: incorrect type in assignment (different base types) expected restricted __le32 [addressable] [usertype] pageCode got int Note that the check to limit the value of the STP_IDLE_TMO field is removed as this field is initialized using the fixed (and small) value defined by the STP_IDLE_TIME macro. The pm8001_dbg() calls printing the values of the SASProtocolTimerConfig structure fileds are changed to use le32_to_cpu() to present the values in human readable form. Link: https://lore.kernel.org/r/20220220031810.738362-9-damien.lemoal@opensource.wdc.com Fixes: a6cb3d012b98 ("[SCSI] pm80xx: thermal, sas controller config and error handling update") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()Damien Le Moal1-3/+5
The fields of the set_ctrl_cfg_req structure have the __le32 type, so use cpu_to_le32() to assign them. This removes the sparse warnings: warning: incorrect type in assignment (different base types) expected restricted __le32 got unsigned int Link: https://lore.kernel.org/r/20220220031810.738362-8-damien.lemoal@opensource.wdc.com Fixes: 842784e0d15b ("pm80xx: Update For Thermal Page Code") Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files") Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()Damien Le Moal1-1/+1
The ds_ads_m field of struct ssp_ini_tm_start_req has the type __le32. Assigning a value to it should thus use cpu_to_le32(). This fixes the sparse warning: warning: incorrect type in assignment (different base types) expected restricted __le32 [addressable] [assigned] [usertype] ds_ads_m got int Link: https://lore.kernel.org/r/20220220031810.738362-7-damien.lemoal@opensource.wdc.com Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix pm80xx_pci_mem_copy() interfaceDamien Le Moal1-5/+3
The declaration of the local variable destination1 in pm80xx_pci_mem_copy() as a pointer to a u32 results in the sparse warning: warning: incorrect type in assignment (different base types) expected unsigned int [usertype] got restricted __le32 [usertype] Furthermore, the destination" argument of pm80xx_pci_mem_copy() is wrongly declared with the const attribute. Fix both problems by changing the type of the "destination" argument to "__le32 *" and use this argument directly inside the pm80xx_pci_mem_copy() function, thus removing the need for the destination1 local variable. Link: https://lore.kernel.org/r/20220220031810.738362-6-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix command initialization in pm80XX_send_read_log()Damien Le Moal2-2/+2
Since the sata_cmd struct is zeroed out before its fields are initialized, there is no need for using "|=" to initialize the ncqtag_atap_dir_m field. Using a standard assignment removes the sparse warning: warning: invalid assignment: |= Also, since the ncqtag_atap_dir_m field has type __le32, use cpu_to_le32() to generate the assigned value. Link: https://lore.kernel.org/r/20220220031810.738362-5-damien.lemoal@opensource.wdc.com Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix pm8001_update_flash() local variable typeDamien Le Moal1-2/+3
Change the type of partitionSizeTmp from u32 to __be32 to suppress the sparse warning: warning: cast to restricted __be32 Link: https://lore.kernel.org/r/20220220031810.738362-4-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: pm8001: Fix __iomem pointer use in pm8001_phy_control()Damien Le Moal1-7/+6
Avoid the sparse warning "warning: cast removes address space '__iomem' of expression" by declaring the qp pointer as "u32 __iomem *". Accordingly, change the accesses to the qp array to use readl(). Link: https://lore.kernel.org/r/20220220031810.738362-3-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commandsDamien Le Moal1-1/+1
To detect for the DMA_NONE (no data transfer) DMA direction, sas_ata_qc_issue() tests if the command protocol is ATA_PROT_NODATA. This test does not include the ATA_CMD_NCQ_NON_DATA command as this command protocol is defined as ATA_PROT_NCQ_NODATA (equal to ATA_PROT_FLAG_NCQ) and not as ATA_PROT_NODATA. To include both NCQ and non-NCQ commands when testing for the DMA_NONE DMA direction, use "!ata_is_data()". Link: https://lore.kernel.org/r/20220220031810.738362-2-damien.lemoal@opensource.wdc.com Fixes: 176ddd89171d ("scsi: libsas: Reset num_scatter if libata marks qc as NODATA") Cc: stable@vger.kernel.org Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: hisi_sas: Remove unnecessary print function dev_err()Yang Li1-12/+3
The print function dev_err() is redundant because platform_get_irq() already prints an error. Eliminate the follow coccicheck warnings: ./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1661:3-10: line 1661 is redundant because platform_get_irq() already prints an error ./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1642:4-11: line 1642 is redundant because platform_get_irq() already prints an error ./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1679:3-10: line 1679 is redundant because platform_get_irq() already prints an error Link: https://lore.kernel.org/r/20220215020524.44268-1-yang.lee@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: dm: Remove WRITE_SAME supportChristoph Hellwig11-79/+3
There are no more end-users of REQ_OP_WRITE_SAME left, so we can start deleting it. Link: https://lore.kernel.org/r/20220209082828.2629273-7-hch@lst.de Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: md: Remove WRITE_SAME supportChristoph Hellwig7-16/+1
There are no more end-users of REQ_OP_WRITE_SAME left, so we can start deleting it. Link: https://lore.kernel.org/r/20220209082828.2629273-6-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: sd: Remove WRITE_SAME supportChristoph Hellwig2-70/+7
There are no more end-users of REQ_OP_WRITE_SAME left, so we can start deleting it. Link: https://lore.kernel.org/r/20220209082828.2629273-5-hch@lst.de Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: rnbd: Remove WRITE_SAME supportChristoph Hellwig4-14/+3
REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was even merged. Link: https://lore.kernel.org/r/20220209082828.2629273-4-hch@lst.de Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.